AMADA EMK3610NT CNC Turret Punch

AMADA PROMECAM Press Brake HACO HSLX 3013, Hydraulic Shear

Air Blow Mist Tooling

460 Ton x 20' 10' x ½"CYBLEC CNC

430, rue Cantin Victoriaville (Quebec), Canada

Bid Live Onsite & Online Via

2008 2010

2001

Large Truck Box & Trailer Manufacturer

A U C T I O N S • L I Q U I D AT I O N S

F I N A N C I N G • A P P R A I S A L S

9 0 5 . 6 6 9 . 8 8 9 3i n f i n i t y a s s e t s . c o m

Like us at: facebook.com/Infinity-Asset-Solutions-Inc

Follow us at: twitter.com/InfinityAssets

OVER $1M STORES INVENTORY • HUGE QUANTITY RAW MATERIAL • 2,000+ LOTS

NAKAMURA-TOME SC300 CNC Lathe

Twin Spindle

DAY 1: Wednesday Oct 29, 10:00 AM (ET) (Machine Tools & Production Equipment)DAY 2: Thursday Oct 30, 10:00 AM (ET) (Stores Inventory, Raw Material, Rolling Stock & Vehicles)

Inspection: Tuesday October 28, 9 AM to 4 PM

DAY 1 – AMADA CNC TURRET PUNCHDAY 1 – AMADA CNC TURRET PUNCH

2008 AMADA EMK3610NT CNC Turret Punch With FANUC180i-PB CNC Control, 33 Ton Capacity, Travels: X-98.43”, Y-60.03”, (58) Station Turret With (2) 4-1/2” & (2) 1-1/4”Auto-Index Stations, Brush Table, 60” x 100”/196.85” Maximum Sheet Size (Without/With Repositioning), 0.187”,Maximum Sheet Thickness, 330 Lbs. Maximum SheetWeight, 1.465” Maximum Ram Stroke, 30 R.P.M. Turret,328/262 F.P.M., AIRBLOW V-EX Mist Tooling, Parts Conveyor, 22HP, 200/200 Volts, 3 Phase s/n 36102203

2008 Air Blow Mist Tooling

Low Hours

AMADA TURRET

QTY of AMADA MATE, Z-TOOLING, AIR BLOW, WILSON (Station A, B, C, D & Multi-Tool)Tooling for Turret Punch

2008 AMADA TOGU IIITurret Punch ToolSharpener And GrinderWith Full Enclosure, 6-1/2" 3-Jaw Chuck,Coolant, s/n 30230938

FANUC 180i-PB CNC

Bid Live ONSITE or ONLINE at

3

DAY 1 – LATE MODEL, LOW HOUR CNC LATHESDAY 1 – LATE MODEL, LOW HOUR CNC LATHES

2010 NAKAMURA - TOMESC300 twin spindle CNClathe with FANUC 18iBCNC Control (Upgraded10.4” Color Screen),13.78” Max Turning Dia.,31.89” Distance BetweenOpposed Spindles, Travels:X-8.76”, Z-25”, B-19.66”(Sub Spindle), 2.80” BarCap., 12” Main SpindleChuck With 3,500 Rpm, 8” Opposed Sub SpindleChuck With 3,500 Rpm, 12 Station Turret With LiveTooling, Tool Presetter,Parts Catcher, Chip Con-veyor, KISAGE Coating OnSlides, (Only 1,580 Hrs.,Great Condition) s/nS311005

NAKAMURA-TOME TMC-35 CNCLathe With FANUC CNC Control,25.69” Swing, 49.8” Between Centers,10 Station Turret, 10” Chuck, 2.52”Bar Cap., Tool Presetter, Chip Conveyors/n 0119

2010 Twin Spindle

Only 1,580 Hrs

25.69" x 49.8" Cap.

This brochure is meant merely as a guide. Infinity Asset Solutions makes no guarantee, expressedor implied, as to the accuracy ofthe information in this brochure. Buyers should inspect the goods

beforehand to satisfy themselves.

DAY 1 – LARGE CAPACITY CNC PRESS BRAKESDAY 1 – LARGE CAPACITY CNC PRESS BRAKES

1987 AMADA PROMECAM STPC406 CNC hydraulic press brake with 460 ton x 20ft 4in capacity, CYBLEC CNC 7000 control, 12.60”stroke, 18ft 4” between housings, 25” throat (upgrade), 071 MS stopping time, SICK V4000 laser curtains s/n 60-0103

460 Ton x 20'

110 Ton x 10'55 Ton x 78.8"

55 Ton x 78.8"Flat Die

2000

Autobend 5 CNC Autobend 7 CNC

CYBLEC CNC

1988 AMADA PROMECAM IT2 100-30 CNC HydraulicPress Brake With 110Ton X 10ft Capacity, HURCO Auto-bend 5C CNC Control, 16” Throat, 102” Between Hous-

ings, 4.13” Stroke, SICK V4000 Light Curtains, 575V3 Phase s/n 0449 70

2000 AMADA RG-50 CNC Hydraulic PressBrake With 55 Ton X 78.8” Capacity, HURCOAutobend 7 CNC Control, 59.9” BetweenHousings, 3.94” Stroke, 14.58” Open Height,15.75” Throat, SICK V4000 Light Curtains,460V, 3 Phase s/n 509758

1998 AMADA PROMECAM RG-50-20 Hydraulic Press Brake With 55 Ton X 78.8”Capacity, 66.75” Between Housings,15.75”, 12" Open Height, Flat Die, s/n 114

AMADA Press Brake Tooling

4

5

DAY 1 – HYDMECH BANDSAWS & SHEARDAY 1 – HYDMECH BANDSAWS & SHEAR

2003 HYDMECH H-18A Automatic Horizontal Bandsaw With E200 Digital Control,18" X 18" Cap., 10 HP Blade Motor, 50-350 FPM, Hydraulic Bundling, Clamping s/n B07031265

2001 HACO HSLX 3013, Hydraulic Shear With 10ft X 1/2" Cap., SC7 Front OperatedPower Back Gauge, 39 ¼” Squaring Arm, Roller Supports, 575V s/n 69501

1997 HYDMECH S-20A SERIES II, AutomaticHorizontal Bandsaw, Plc100 Control, 13" X 18"Capacity, 1-1/4" Blade, 5 HP Blade Drive Motor,75-400 Fpm, Hydraulic Bundling, Clamping s/n810972

1991 HYDMECH S-20A Automatic HorizontalBandsaw With 13” X 18” Capacity, 1-1/4"Blade, 5 HP Blade Drive Motor, 75-400 FPM,Clamping, s/n 10991558

2003

2001

10' x 1/2" Cap.

Hydraulic Bundling

DAY 1 – VERTICAL CNC MACHINING MILLSDAY 1 – VERTICAL CNC MACHINING MILLS

1998 MATSUURA MC-800VG CNC Vertical Machining Center With Yasnac CNC Control,20” X 45” Table, Travels: X-31.5", Y-20", Z-20", Bt-40 Taper, 24 ATC, Chip Conveyor,10/15 HP, 200/220 V, 3 Phase s/n 980313360

1997 KIHEUG KMB-U-H7 Universal Mill With HEIDENHAIN DRO, 29.5” x 154” Table,Travels: X-126”, Y-39.37”, Z-31.5”, 8800Lbs Table load, Ball Screw XYZ, Weighs33,000 Lbs, 50 Taper, Vertical Head, 18-1,300 RPM, 15HP, 220V 3 Phase s/n7090501

TOS Vertical Mill With 15.75” X 55” Table, 1,800RPM, Power Feeds, With DRO

1989 JAROCIN FWF 32J universal mill with12.5” x 51” table, ACU-RITE MILLVISION readouts/n 0119

MATSUURA MC-1000VS CNC Vertical MachiningCenter With FANUC CNC Control, 19.5” X 55"Table, Travels: X-41.38”, Y-19.63”, Z-22", CAT 50,35 ATC, 3600 RPM, 25 HP Spindle Motor (Rebuilt2011) 220V, 3 Phase s/n 85024403

6

29.5" x 154" Table$175K Replacement

HURON Style1997

1998

7

DAY 1 – BORING MILL & LATHESDAY 1 – BORING MILL & LATHES

UNION BFT90-3 table Type Horizontal Boring Mill With 4" Spindle, 50 Taper, Facing Head, 55" X 49" Built In Rotary Table, Travels: X-63", Y-49", Z-63", 1,600 RPM, 15 HP, Facing Head,ACURITE DRO, Pendant Control s/n 0287

BENIGN Gap Bed Engine Lathe With 24” Swing, 86” Between Centers,12” Chuck, 2,000 RPM, DRO, 3” Bore, s/n 0267 s/n 071

TOS SN 50 Gap Bed Engine Lathe With 21” Swing, 98” Between Centers, 16”Chuck, 2” Bore, DRO, 2,000 rpm, Steady Rests

SIRCO PA20 Gap Bed Engine Lathe With 22” Swing, 68” Between Centers, 4” Bore,1,500 RPM DRO

TOS SN71C/3000 Gap Bed Engine Lathe With 29” Swing, 122” Between Centers, 12”Chuck, 1,000 RPM, 3” Bore, DRO, 2 Steady Rests

Bid Live ONSITE or ONLINE at

4" Spindle

3 Axis DRO

2008

29" x 122" Cap.

4" Bore

DIA CE 502 VS Electronic Dynamic Balancing Machine With 450 RPM For Shafts And 900 RPM For Propeller Shafts And Rotors, WeldUnit, Large Qty Of Attachments And Tooling s/n 10182

DIA Tooling

2007 METALEX FPR-0806 Hydraulic Horizontal Initial Pinch Plate Rolls with Air Drop,600V 3 Phase s/n 961001

2007 ATLAS COPCOGA55VSD 75HP Rotary Screw AirCompressor With18,366 Hrs., s/nAP1574461

2001 ATLASCOPCO GA37,50HP RotaryScrew Air Compressor With 16,350 Hrs.,

D-BUR-R Machine With 4 Rolls, 1.25” Track 2007

DAY 1 – ELECTRONIC DRIVESHAFT BALANCING MACHINEDAY 1 – ELECTRONIC DRIVESHAFT BALANCING MACHINE

PLATE ROLLS & DEBURRPLATE ROLLS & DEBURR8' x 1/4" Cap.

8

9

DAY 1 – LARGE QTY OF WELDERS AND SUPPORT EQUIP.DAY 1 – LARGE QTY OF WELDERS AND SUPPORT EQUIP.

MILLER, HOBART, CANNOX Boom Welders With Wire Feeds

PLYMOVENT Welding Exhaust Units With Flexmax 12ft Arms And Blower,50kg Cap., Self-Contained Units

2001 INECO QB-76 VDE Tube Bender With Up To 3" Cap.,With Dies s/n 76C330

PROMECAM 25 ton horizontalVERSAPRESS with 17” stroke,31.5” x 23.5” work area

JOSHUA HEAP Power Threader With Up To 3" Capacity s/n 965T TOS BPH 300 12" x 39.5” Surface Grinder, s/n 0211138 AMADA VERSA 206 Hydrolic Notcher With1/4" Sheet Thickness, 8"x8" Knife

KAO MING KMR-700DS Radial Drill With1,500 RPM, Box Table

25+ Available

8 Available

Varible Angle

DAY 1 – MASSIVE 2,000 LOT SALE – DAY 1 – MASSIVE 2,000 LOT SALE –

10

NOT TO BE MISSED! BID ONLINE OR ONSITE.NOT TO BE MISSED! BID ONLINE OR ONSITE.

11

12

DAY 2 – OVER $1 MILLIONOF STORES INVENTORY

DAY 2 – OVER $1 MILLIONOF STORES INVENTORY

13

To Include TIMKEN, NTN, McGill, TORRINGTON Bearings, 10 New Gas Motors Up To 32 HP (HONDA GX690, PERKINS And Various Brands, 3 & 4 Stroke) Bearings, Drive Train Components,Chains, Slings, Fittings, Cylinders, Nuts, Bolts, Hoists, Carbide Tooling, New Tires And More.

14

DAY 2 – MATERIAL HANDLING & ROLLING STOCKDAY 2 – MATERIAL HANDLING & ROLLING STOCK

DREXEL SL43FSS 4000 Lbs. Cap. Swing Mast Forklift s/n 025DREXEL SL66 7,000 Lbs. Swing Mast Forklift

TCM FRHB18-6 Electric Reach Truck s/n 780016942003 JLG 1932 E2 Platform Lift s/n 0200113115

Motorized Track Mount Scissor Lift With 11ft 4” X 72” Lift Area HARDY Material Roll Out Racks 2010 FORD Van/Truck, VIN NM0LS6ANAZAT033924

TOYOTA 7,400 lbs. LPG Forklift, Side Shift MASSEY FERGUSON 7,000 Lbs. Cap. Outdoor 4x4Forklift And Attachments

Partial View Of Pickup Trucks

RAMEC Dump Trailer, 16ft x 6ft VIN 2E9US52E9AC072147

Also: Box Trailers, Shuttle Trailers And More

2009

2010

40,242 KMS

2011

As New As 2010

15

HUGE OFFERING OF RAW MATERIAL, WIP & SCRAP METALHUGE OFFERING OF RAW MATERIAL, WIP & SCRAP METALTo Include Plate Sheet, Bar, Angles, Tube, Checker Plate, I-Beam Of Various Grades Of Steel And Aluminum,Stainless, Wire Mesh, Various Steel Incomplete Projects Stored In Yard.

i n f a s s e t s . c o m Print

ed in

Can

ada

AUCTIONS • LIQUIDATIONS • FINANCING• APPRAISALS63 Maplecrete Road, Concord, Ontario L4K 1A5 Canada infinityassets.com • Tel: (905) 669-8893 • Fax: (905) 669-7512

DAY 1 – CRIMPING DEPART. & SUPPORT EQUIP.DAY 1 – CRIMPING DEPART. & SUPPORT EQUIP.

Complete Department To Include: (2) GATES POWER CRIMP 707, PARKER, DAYCO Crimpers, EATON SYNFLEX MARKV Coupling Swaging Machine, Huge Assortment Of Dies And Fittings Etc.

(2) ECO SR30V & PRO TEK Solvent Recyclers s/n 0251 CHEN Slotter With 25” Dia. RotaryTable s/n 82058

Shipping Containers

View of 50+ MILLER,ESAB, CANOX, HOBART,MEMCO Welders

TENCO 60"x30" Bailer BAUTOR 110 Ton OBI Press, Air Clutch

Member In Good Standing Of:

TERMS OF SALEPayment: All payments must be in Cash, Certified Funds, Wire Transfers, orCompany Checks, which must be accompanied with a bank letter guaranteeingirrevocable payment to Infinity Asset Solutions Inc. All Online bidders must register on Bidspotter by 5pm Tuesday October 28.A 15% buyers premium will be added to all onsite purchases (18% Online).A $500 refundable security deposit is required upon onsite registration ($2,000 Online).A 25% deposit is required at time of purchase, balance due by 4pm Friday October31st, 2014. NO EXCEPTIONS.All goods are sold “As Is, Where Is”, ALL SALES ARE FINAL. All subject to prior sale. Complete terms and conditions including removal procedures, are available on ourwebsite, will be posted at the auction and will be provided at the time of registration.

REMOVAL TIMESAll items by Wednesday November 5, 2014. Hours: Monday – Friday between 8 am– 4 pm. No items may be removed during auction. NO EXCEPTIONS.

DIRECTIONS: To 430, rue Cantin, Victoriaville (Quebec), G6P 7E6From Québec City Jean Lesage International Airport: (Approx. 1 Hr 15 Mins)Take Autoroute Duplessis/ Autoroute 540 S to QC-162 O/QC-263 S in Saint-Louis-de-Blandford. Take exit 235 from Trans-Canada Hwy W, Follow QC-162 Oto Rue Cantin in Victoriaville. Destination will be on the Right. From Montréal-Pierre Elliott Trudeau International Airport: (Approx. 1 Hr 40 Mins)Take Autoroute Côte-de-Liesse/Autoroute 520 E to Trans-Canada Hwy to Autoroute 955 S in Sainte-Eulalie. Take exit 210 from Trans-Canada Hwy.Follow Autoroute 955 S and QC-122 E to Rue Cantin in Victoriaville. Destination will be on the Right.

This brochure is meant merely as a guide. Infinity Asset Solutions makes no guarantee, expressed or implied, as to the accuracy of the information in thisbrochure. Buyers should inspect the goods beforehand to satisfy themselves.