PPL IL License No. 444.000322 David Muslin License No. 441.001650 Michael L. Ackerman License No. 440.000539 18% Online Buyer’s Premium

Presses • Roll Formers • Press Brakes • Shear • Surface Grinders • Band Saws • Lathes Welders • Powder Coat Paint Systems • Material Handling & Factory Equipment • MORE!

Bid Online Only at105 Revere Drive, Suite C Northbrook, Illinois 60062

Phone: 224.927.5320 sales@pplauctions.com

www.pplauctions.com

ONLINE AUCTION: March 10 thru 17 - Material Handling, Battery Equipment, Shipping & Shop Equip.

WEBCAST AUCTION: Tuesday, March 16th 10:00am CDT Bid Online in Real Time, No On-Site Bidding – Please call 224-927-5320 with any questions

WEBCAST & ONLINE AUCTIONLarge Metal Stamping, Roll Forming & Fabricating Plant

411 S. 1st Avenue Albert Lea, Minnesota 56007

INSPECTION: Monday & Tuesday, March 15th & 16th 9:00am - 4:00pm CDT

Plant Closed:

24-Stand

110 Ton

135 Ton

400 Ton 250 Ton

Overhead Conveyor Powder Coat System

PPL Auction Phone: 224.927.5320 www.pplauctions.com

PRESSES Niagara 400 Ton 2-Point Straight Side Press Model BP2-400-72-54, S/N P52903, 5” Stroke, 14” Adjustment, 29” Shut Height, 50 - 100 SPM, 54” x 72”” Bed, Air Clutch, Rowe Stock Feed, Rowe Straightener, Rowe Uncoiler w/Coil Car Niagara 300 Ton 2-Point Straight Side Press Model BP2-300-72-48, S/N 38530, 5” Stroke, 6” Adjustment, 23” Shut Height, 55 - 110 SPM, 48” x 72” Bed, Rowe Stock Feed, Rowe Straightener, Rowe Uncoiler with Coil Car Niagara 250 Ton 2-Point Straight Side Press Model PN250-72-54, S/N 52564, 6” Stroke, 6” Adjustment, 20” Shut Height, 10 - 20 SPM, 54” x 72” Bed, Niagara Servo Feed, American Steel Line 20,000 lb. Uncoiler, S/N 7793 Stamtec 250 Ton 2-Point Straight Side Press Model S2-250, S/N A10014 P01-S001204, 6” Stroke, 4.92” Adjustment, 35 -75 SPM, 55” x 84” Bed, Rowe Servo Feed, Rowe Uncoiler Model 20040-DSV, S/N 25608 Minster 150 Ton Straight Side Press Model S1-150” 33-39, S/N 12167, 4” Stroke, 16” Shut Height, 70 - 140 SPM, Light Curtain Safety Aida 150 Ton Gap Press Model NC1-15(2), S/N 00215-5570, 7.8” Stroke, 3.9” Adj., 45 SPM, 30” x 46” Bed, Coil Handling EQ PL-LT2-210 Servo Feed Niagara 110 Ton OBI Press Model AF 5-1/2, S/N 38525, 5” Stroke, 5” Adjustment, 15.25” Shut Height, 42” x 27” Bed, 80 SPM Aida 110 Ton Gap Press Model NC1-110(2), S/N 10411-0259, 7.08” Stroke, 3.54” Adjustment, 13.77” Shut Height, 32” x 45” Bed, Air Clutch Aida 110 Ton Gap Press Model NC1-110(2), S/N 10211-9309, 7.08” Stroke, 3.54” Adjustment, 13.77” Shut Height, 35 - 65 SPM, 28.7” x 42” Bed, Coil Handling EQ PM-LT3-210 Servo Feed, Air Clutch Dreis & Krump 100 Ton 2-Point Straight Side Press Model SS-100-24-72, S/N P9150, 24” x 72” Bed Verson 100 Ton 2-Point Gap Press Model 100G2 72, S/N 21824, 8” Stroke, 5” Adj., 23” Shut Height, 40 SPM, 38” x 64” Bed, with Tishken Cut-off Niagara 75 Ton 2-Point Straight Side Press Model SC2-75-72-30, S/N 37602, 2.5” Stroke, 6” Adjustment, 17” Shut Height, 75 -150 SPM, 30” x 72” Bed, Air Clutch (new drive) Dreis & Krump 75 Ton 2-Point Straight Side Press Model SS-75-72-30, S/N L15719, 2.5” Stroke, 5” Adjustment, 75 - 125 SPM, 30” x 72” Bed Niagara 60 Ton OBI Press Model M60, S/N 38446, 3” Adj., 12.75” Shut Height, 32” x 21” Bed, Coil Handling EQ D-15 Servo Feed, S/N R29531 Federal 60 Ton Auto Feed OBI Press, S/N 065458 (2006), 3” Stroke, 2.5” Adjustment, 14.75” Shut Height, 60 - 140 SPM, 18” x 30” Bed Havir 55 Ton OBI Press No. 55, S/N 316, 3” Stroke, 20” x 31” Bed, Coil Handling EQ D-15 Servo Feed Model D-15, Air Clutch Dreis & Krump 50 Ton Straight Side Press, Vamco Feeder, Rowe Uncoiler Dreis & Krump 50 Ton 2-Point Straight Side Press Model 46-CS, S/N 1-10453, 6’ x 10 ga. Capacity, 12” x 52” Bed, 6’ Overall, 56” Between Housings, Power Feed Conveyor (3) Minster 35 Ton OBI Presses Model 35, S/Ns 35-12064, 36-119031, 35-12489, 3” Stroke, 3.25” Adjustment, 10” Shut Height, 130 SPM, 15” x 24” Bed, (1) with Coil Handling Servo Feed, Air Clutch

WEBCAST AUCTION: Tuesday, March 16 10:00am

600 Ton 400 Ton

300 Ton 110 Ton 35 Ton

250 Ton

PPL Auction Phone: 224.927.5320 www.pplauctions.com

ROLL FORMERS Tishken 24-Stand Roll Former Model 24HWS, S/N 19406986, 3” Arbors, 36” Roll Space, 14” Horizontal Spacing Tishken 20-Stand Roll Former Model 20-MW-2, S/N 10673, 2” Arbors, 12” Roll Space, 12” Horizontal Spacing, Tishken Pre-Notcher, Rowe Uncoiler, Mechanical Cut-off Tishken 20-Stand Roll Former Model 20MLW 1-1/2, S/N 9941-362, 1-1/2” Arbors, 7” Roll Space, 8” Horizontal Spacing Tishken 16-Stand Roll Former Model 16-HW 2-1/2, S/N 9288-660, 2-1/2” Arbors, 12” (est.) Roll Space, 14” Horizontal Spacing Tishken 16-Stand Roll Former Model 16-HW 2-1/2, S/N 8944-460, 2-1/2” Arbors, 10” Roll Space, 14” Horizontal Spacing Tishken 16-Stand Roll Former Model 16-MW-2, S/N 7019-659, 2” Arbors, 12” Roll Space, 12” Horizontal Spacing Tru-Tech 16-Stand Roll Former, 2” Arbors, 12” Roll Space, 10” Horizontal Spacing, 50 HP Yoder 16-Stand Roll Former, 1-1/2” Arbors, 8” Roll Space, 11” Vertical Spacing (two stands in crate) Pearson 14-Stand Roll Former, S/N R166, 2” Arbors, 12” Roll Space, 8” Horizontal Spacing, 25 HP Tru-Tech 14-Stand Roll Former, 2” Arbors, 10” Roll Space, 12” Horizontal Spacing, Uncoiler, Mechanical Cut-off Tishken 12-Stand Roll Former Model 12MLW 1-1/2, S/N 19423, 1-1/2” Arbors, 6” Roll Space, 8” Horizontal Spacing Tishken 10-Stand Roll Former Model 10-MW-2, S/N 18830-984, 2” Arbors, 8” Roll Space, 12” Horizontal Spacing Tishken 10-Stand Roll Former, Mechanical Cut-off • (10) Assorted Tishken Pre-Notchers & Flying Cut-offs Tishken 8-Stand Roll Former Model 8-MW-2, S/N 2036944-90, 2” Arbors, 10” Roll Space, 12” Horizontal Spacing PRESS BRAKES • SHEAR Cincinnati FormMaster 600 Ton Permanently Flanged Hydraulic Press Brake Model 600FMX12, S/N 43311, 12” Stroke, 20” Throat, 12’ 5” Between Housings, 42” x 16’ Bed, Light Curtain Safety Cincinnati 350 Ton Hydraulic Press Brake Model 350FMX16, S/N 43279, 18’ Overall, 16’ 6” Between Housings, 12” Stroke, 18” Throat, 12” x 18’ Bolt-on Flanges, Rowe Straightener, Rowe Feeder, Rowe Uncoiler Cincinnati 300 Ton Permanently Flanged Mechanical Press Brake Model 12SERIESX12’, S/N 39042, 6” Stroke, 32” x 8’ Bed, 14’ Overall, 12’ 6” Between Housings, Air Clutch Dreis & Krump 135 Ton Press Brake Model 410D, S/N P8787, 12’ Overall, 10’ 6” Between Housings, 8” Throat, Air Clutch Dreis & Krump 135 Ton Power Press Brake Model 810-R, S/N L-17899, 122” Overall, 102” Bet. Housings, 8” Throat, w/Rail Mounted Transfer /Feeder (2) Cincinnati 135 Ton CNC Hydraulic Press Brakes Model 135CBX8, S/Ns 45217, 45247, 8” Stroke, 10’ Overall, 8’ 6” Between Housings, 7.5” Throat, Autogage 1000 Control Cincinnati 90 Ton CNC Hydraulic Press Brake Model FMX8FT, S/N 45093, 8” Stroke, 10’ Overall, 8’ 6” Between Housings, 7.5” Throat, Hurco Autobend 5C Programmable Back Gauge Cincinnati 90 Ton CNC Hydraulic Press Brake Model 90FMX8, S/N H5093, Hurco Programmable Back Gauge Cincinnati 10’ x 1/4” Hydraulic Shear Model 2CC10, S/N 47611, Squaring Arm, (2) Front Support Arms, Power Back Gauge

Bid Online Only at24-Stand

350 Ton 300 Ton

90 Ton

20-Stand 16-Stand

PPL Auction Phone: 224.927.5300 www.pplauction.comPPL Auction Phone: 224.927.5320 www.pplauctions.com

SURFACE GRINDERS • BAND SAWS • LATHES (2) Okamoto 12” x 24” Hydraulic Surface Grinders Model 12-24 DX, S/Ns 64232, 63949, 12” x 24” Electromagnetic Chuck, Coolant Landis 10” x 15” Hand Feed Surface Grinder Model Abrasive No. 1-1/2, S/N 131-8, 10” x 15” Permanent Magnetic Chuck, Coolant Clausing 6” x 12” Surface Grinder Model 4002, S/N 73-8191, 6” x 12” Electromagnetic Chuck, with Torit Dust Collector DoAll 36” Vertical Band Saw Model V36, 30” x 30” Tilting Table, Butt Welder • (2) Grob 18” Vertical Band Saws Model NS18, S/N 10483, N/A DoAll 16” Vertical Band Saw, Tilting Work Table, Butt Welder • Wells Portable Horizontal Band Saw Model Metal Master LeBlond 15” x 42” Geared Head Engine Lathe, S/N HC519, Dual Drive • Monarch 14” x 30” Geared Head Engine Lathe Model 12”CK, S/N 13992 WELDERS (2) Panasonic Robo Welders Model VR-006 AC, S/Ns 10005, 00024, Panasonic Model YA-1FMR81Y07 or Model YA-1FCR81Y01 5-Axis Robot, with Panasonic Model YD-350AA2 Welder with Fume Extractor Acme 75 KVA Pneumatic Press Type Spot Welder Model PT1P-18-75, S/N 9567, 12” Throat, Robotron Control T.J. Snow Pneumatic Press Type Spot Welder, S/N 10UM1779 • Central Engineering Co. Multi-Head Spot Welder, S/N 60-142 Robotron Spot Welder with Miller CP-302 Power Source • (6) Assorted Small Capacity Spot Welders (12) Hobart 300 Amp Welders Model CV-300 • (2) Miller 300 Amp Welding Power Supplies Model CP-300 Lincoln Square Wave TIG Welder Model TIG 175 • (10) Assorted Airco Welding Power Sources • (9) Kemper & (3) Trion Smoke Eaters POWDER COAT PAINT SYSTEMS ITW Gema Overhead Conveyor Powder Coat Paint System consisting of: 4100’ Medium Duty Conveyor with 3” Between Hanger Holes & 6” Between Hangers, Pass-Thru 3-Stage Alkaline - Rinse - Rinse Washer, 2-Pass Gas Fired Dry-off Oven, Powder Coat Room with (2) Rail Mounted Spray Booths with (36) Power Reciprocating Guns with Power Supplies, Powder Overspray Collectors, Vortex 10,000 CFM Fan, (9) Portable Powder Hoppers, (10) Transfer Hoppers, Torit Clean-up Booth, Multi-Pass Gas Fired Mezzanine Bake Oven, with Controls Rohner/Gema Overhead Conveyor Powder Coat Paint System consisting of: 1400’ Medium Duty Conveyor with 3” Between Hanger Holes & 6” Between Hangers, Unload Station with (3) Hydraulic Scissor Lifts, Pass-Thru 3-Stage Washer, #1 Powder Coat Room with Stainless Steel Booth with (2) Manual Spray Stations, #2 Booth with (14) Power Oscillating Powder Spray Guns with Power Supplies, Rohner Overspray Recovery Systems with (2) Spare Recoveries, (3) Portable Powder Hoppers, 6-Pass Bake Oven, with Controls

ITW Gema Overhead Conveyor Powder Coat Paint System

Rohner/Gema Overhead Conveyor Powder Coat Paint System

PPL Auction Phone: 224.927.5300 www.pplauction.comPPL Auction Phone: 224.927.5320 www.pplauctions.com

MATERIAL HANDLING EQUIPMENT Yale 10,800 lb. Electric Forklift Model ERC1208DN48TE084 • Prime Mover 4750 lb. Stand-up Reach Electric Forklift Model RR40 (4) Toyota 4500 lb. Stand-up Reach Electric Forklifts Model 6BR023 • (5) Crown 4500 lb. Stand-up Reach Electric Forklifts Model 45RRTT Crown 4500 lb. Electric Forklift Model 50FCTT-188 • (2) Crown 4500 lb. Stand-up Reach Electric Forklifts Model RR3520-45 (3) Crown 4500 lb. Walk-Behind Forklifts • Clark 4150 lb. Electric Forklift Model ECS25 • (3) Crown 4000 lb. Electric Forklifts Model 40FCTT-188 Yale 4000 lb. Electric Forklift Model ERP040TFN36FTSE • (4) Crown 3500 lb. Stand-up Reach Electric Forklifts Model 35RRTT Caterpillar 3000 lb. Electric Forklift Model E3000 • Yale 2900 lb. Electric Forklift Model ERC030AHN36TE088 (2) Clark 2000 lb. Electric Forklifts Model FC500-40-TL ••• see lot catalog for more details on forklifts ••• MTC Battery Power Changer Model PCH-2-40-SS-V (designed for ten forklifts), S/N 153205, consisting of: Single Stacking Power Changer, 5 HP Motor, Guide Rails, Electric Rail, (2) Battery/Battery Charger Racks B.H.S. Battery Wash Cabinet Model BWC-2, S/N 6-2006, Stainless Steel Construction Enersys 48 Volt Battery Charger Model D3G-24-850, S/N FH16681 (includes stand) • (12) Steel Case Batteries (23) Battery Chargers • (2) 48” Forks • (1) Twin Barrel Lift • (4) 60” Pallet Jacks • (30) Pallet Jacks 1 Ton, 15’ Wide Portable Gantry, with C.W. 1/2 Ton Electric Chain Hoist, M&W 1 Ton Adjustable Spreader (55+) 2 cu. yd., 1-1/2 cu. yd., 1 cu. yd., 1/2 cu. yd. & 1/4 cu. yd. Self Dumping Hoppers Material Handling Equipment including: (2) 15 Ton - (3) 10 Ton - (1) 2 Ton C-Hooks, Caldwell 5 Ton 12’ Spreader, Caldwell 5 Ton 6’ Spreader, Bushman 10 Ton Below-Hook Lifter, Gantry Type Work Table including Aero-Matic Balancer, (2) 28,800 lb. Mesh Slings - 12” Wide, 18’ Long, (1) 1/2” x 8’ 2-Leg Chain Sling, (3) 1/2” x 8’ Single-Leg Chain Slings, (3) Assorted Hooks, Dillon 15,000 lb. Scale, (5) Assorted Chain Slings & Web Slings, (1) 1/2 Ton Barrel Lift, (1) Fork Attachment, (1) 4 Ton 32” Spreader MISCELLANEOUS EQUIPMENT (3) Assorted 3 Ton Top Running Overhead Bridge Cranes • 75 Ton (est.) Adjustable Bed & Ram Hydraulic Shop Press (6) Bridgeport Vertical Mills, 1 HP - 1-1/2 HP - 2 HP, 9” x 42” Work Table, Most with Power Feed Mitsubishi Meldas EDM Machine Model WX, S/N W03700706 (#85) • Pemserter Pneumatic Insertion Press Series 4, S/N L4-5478 (2012) 6” x 6” Notcher • Hammond Double End Polishing Lathe • (1) Schreiber & (1) Russell Superior Chillers Advance Terra Floor Sweeper Model 5200B, S/N 1763528 • (5) Assorted Auto Banding Machines Arpac 60” Wide Shrink Tunnel Model 105-60, S/N 5200, Mesh Belt Conveyor with Scale • (4) Assorted Rotary Pallet Stretch Wrappers Factory Equipment including: Push-Around Hydraulic Die Lifts, Shop Benches, Pallet Jacks, Banding Equipment, (15) Assorted Lift Tables, Sheet Lifters, Portable A-Frame, Assorted Die Sets, etc.

ATTENTION: PLANT MANAGER OR MACHINERY BUYER

105 Revere Drive, Suite C Northbrook, Illinois 60062

www.pplauctions.com

STAMPING, ROLL FORMING & FABRICATING PLANT

PPL IL License No. 444.000322 David Muslin License No. 441.001650 Michael L. Ackerman License No. 440.000539

Streater - Stamping & Fabricating Plant WEBCAST: March 16 • ONLINE: March 10 - 17INSPECTION: Mon. /Tues. March 15 & 16 9:00am - 4:00pm

WEBCAST & ONLINE AUCTION

INSPECTION: Mon./Tues. March 15 & 16 9:00am - 4:00pm

WEBCAST & ONLINE AUCTION

WEBCAST AUCTION: March 16 • ONLINE: March 10 -17

411 S. 1st Avenue Albert Lea, Minnesota 56007

105 Revere Drive, Suite C Northbrook, Illinois 60062 Phone: 224.927.5320 sales@pplauctions.com

www.pplauctions.com

REGISTRATION & BIDDING: Everything will be sold to the highest bidders for cash, in accordance with the auctioneer’s normal “Terms of Sale”, which are available at the site or by request at 224-927-5320. All bids are in US dollars. An 18% Buyer’s Premium will be added to online bids. Your bid is a contract: Place a bid only if you’re serious about buying the item. If you are the high bidder, you will enter into a legally binding contract with PPL Auction. PAYMENT: All successful Bidders agree to make full payment to PPL Auction at the conclusion of the sale. Only Bank Wire Transfer, Bank Check or Cashier’s Check payable to PPL Auction will be accepted. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. If you are using a wire transfer your bank may wire the funds the day after the sale. All sales are subject to sales and/or local taxes unless a signed exemption form is presented at the time of the purchase. Payment will be made in US dollars only. VERIFY DESCRIPTIONS: Note: Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information contained in the auction brochure, lot catalog or sale web pages. Buyer agrees to accept assets purchased per standard auction terms, “AS IS, WHERE IS, WITH ALL FAULTS” WITHOUT ANY REPRESENTATION OR WARRANTY BY PPL AUCTION OR ANY OTHER PERSON. THERE ARE NO EXPRESSED OR IMPLIED REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ASSETS INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION OR WARRANTY REGARDING THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. REMOVAL & RIGGING: Removal and Rigging is the responsibility of the buyer. Anyone, either a buyer or a rigger, who uses a powered vehicle to remove anything from the auction site, will be required to present a certificate of insurance. Removal may begin when the auction has completed and payment in full has been made. ISSUANCE OF TITLE: Titles relative to titled assets purchased will be mailed to the purchaser’s address on file after payment is received and cleared. All invoices must be paid in full at end of auction. Any merchandise not paid for at this time will be considered abandoned and may be resold by auctioneer, any loss incurred in the resale to be borne by the original buyer.

Auction Terms & Conditions ONLINE BIDDING ONLY

ON-LINE BIDS SUBJECT TO 18% BUYER’S PREMIUM

Scan with your

phone to link to our

website

Plant Closed:

24-Stand

250 Ton