LanoProtect LLanooProtP tectt ‘N ‘Naturally Superior ...€¦ · you to get right into those...
Transcript of LanoProtect LLanooProtP tectt ‘N ‘Naturally Superior ...€¦ · you to get right into those...
ProtectsDisplacesPenetratesLubricatesSeals
LanoProtectLanoProtect‘Naturally Superior’
ProtectsDisplacesPenetratesLubricatesSeals
‘Naturally Superior’‘Naturally Superior’50 Eastgate Drive, Eastgate Business Park, Little Island, Cork, Ireland.
Tel: +353 21 4352945 Fax: +353 21 4354653 [email protected] www.lanoprotect.com
50 Eastgate Drive, Eastgate Business Park, Little Island, Cork, Ireland. Tel: +353 21 4352945 Fax: +353 21 4354653
www.lanoprotect.comwww.lanoprotect.com
100%
BIODEGRADABLE,
NON TOXIC &
ENVIRONMENTALLY
FRIENDLY
LanoLanoL
oProtoProtP
tecttectt
LanoLanoLLanoaturally Superior’‘N
oProtoProtoProtaturally Superior’
tecttecttectaturally Superior’
BIOD
100%,ADABLEGRDE
DiDiPrPrDiPPr
isplaceisplaceotectotectrorrro
i lt totectr
esessss
s
BIOD
ON
VINNVEEN
R
,ADABLEGRDE
TOXIC ON &Y ALLLY TMENNTIRON
YDLLYNIEEFR
SeSeLuLu
eePePP
SSeLLu
eePP
ealsealstt
aarapp
ubricaubricaenetrenetr
atleals
ttb iubricaaatenetr
p
testestestesaaatttesttesaa
a a ‘N‘N50 Eas Eastg
a a ‘NN50 E t
tural tural
wwwwwwproinf
el: +353 21 4 353 21 43 T + stgate Drive, Eastgat gate Drive, Eastgate
t l tural
wwwwwwi finfo@lanop
el: 353 21 43 Tel: +353 21 435 Tel: 353 21 4 T Tel: +353 21 4352945 Fax: +353 21 4354653 t D i E t t
Tel: +353 21 435
lly Sully Su
ww rootect.cootect.co.lanopr.lanoprw..wwwotect.lanot.comwrt.com @lanoprtecfo@
2945 Fax: +353 945 Fax: +353 4353529usiness Park, Li usiness Park, Li te Be Bu
ll Slly Su
t totect.coprlwwww.ww.otect.lanowwwf @l pr
352945 F 353 4352945 Fax: 353
Bu i P k Li
uperi uperi
omomopm
21 4354653 3 21 43546 ttle Island, Cork, Ireland. ittle Island, Cork, I
i uperi
omoprotect.com
3 21 4354653 21 4354653
ittl I l d C k I
ior’ or’ land. relan
’ ior’ l nd.
LanoProtect Product Summary
LANOPROTECT LANOLIN GREASE
LanoProtect Grease is a thick tacky environmentally friendly, biodegradable, non toxic
grease with high load and excellent coefficient of friction capabilities that will not wash out
under most conditions, from underwater to general usage. LanoProtect Grease will provide
excellent results as an anti-corrosive, thread anti-seize and general lubricant. LanoProtect
Grease is also used where heavier protection / rejuvenation is required, just simply melt
grease (if required) and apply with a paintbrush or roller to achieve the famous LanoProtect
long term protection without all those nasty toxic chemicals widely used in today’s industries
that are harmful to user and our precious environment.
Please note: Not recommended on a high speed bearings without a seal containment.
LANOPROTECT LIQUID LANOLIN
A sprayable form of the famous Lanolin Grease, which leaves a non‐drying liquid
film that does not evaporate or wash off. The film left by LanoProtect is your
protection barrier against oxidation and corrosion and with the films resistance to
acidic and alkaline solutions you can count on LanoProtect to do exactly that.
LanoProtect is also a superb general purpose lubricant and penetrant as well as
operating as a water dispersant you will not be able to find a product that
provides such a large range of properties for a multitude of applications whether
that is for metal, timber, rubber, plastic or leather.
LANOPROTECT 400ML AEROSOL
LanoProtect liquid lanolin packaged in an easy to use 400ml aerosol can, allowing
you to get right into those tight areas such as locks and hinges that always prove
difficult to lubricate and protect. The LanoProtect aerosol can contains lanolin
grease and a specifically formulated solvent carrier, this carrier enhances water
dispersing and penetrating properties of protect whilst allowing the grease to
remain suspended ensuring an evenly dispersed film of lanolin.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
LANOPROTECT LIQUID LANOLIN
LanoProtect liquid lanolin is packaged in a 750ml trigger gun that can be refilled from a 5Ltr,
20Ltr and 200Ltr drums. The trigger mechanism on the 750ml is constructed using viton
seals ensuring long life under any conditions. LanoProtect Liquid Lanolin will provide the
same features and benefits as the aerosol can version, however in its liquid form,
LanoProtect has been strengthened with double the lanolin providing a heavier film for
better lubrication and protection.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
HIGH VOLTAGE TESTING
Testing of the Lanolin Products has achieved a voltage rating of 70,000 Volts. Testing
of Lanolin Products was conducted by Energex Limited the energy supplier to South
East Queensland, Australia. All high voltage testing was conducted in a controlled
laboratory environment.
TEST METHOD
Dry Leakage Test
A suitable length of fiberglass rod (approx 700mm long) was cleaned of any surface
contaminants with alcohol. The fiberglass rod was placed on the testing frame with
70,000 Volts applied to both ends with the centre earthed for one minute. The
standing leakage current was measured and recorded.
The liquid lanolin product was applied by spraying onto the fiberglass rod and
allowing 1 minute drying time before the rod was placed onto the testing frame.
Wet Leakage Test
Immediately after each of the dry leakage tests, water was sprayed onto the surface
of the fiberglass rod and allowed to drip for 1 minute. The test voltage was then
increased until reaching 70,000 Volts.
So what does this mean?
Well this testing assures you that Lanolin Products are safe to use on electrical
equipment with up to 70,000 Volts. This means products are safe to spray on
electrical motors, wiring, switching equipment, antennas and aerials, battery
terminals and connections for the purpose of protecting them from fusing corrosion
or shorting out from moisture contamination.
Please remember to turn off all electrical equipment before applying LanoProtect
Lanolin Products.
Do not apply product to live electrical equipment.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
FLASH POINT APPROVAL
Flash Point Approval has been granted to the range of The Lanolin Products in
accordance with Australian Standards AS2106.2:1999, using the Pensky‐Martens
apparatus.
Flash Point approval testing of the Lanolin Products was conducted and a confined
spaces approval has been granted by the Department of Mineral Resources Mine
Safety Laboratory of New South Wales to Australian Standards AS2106.2:1999 in a
controlled laboratory environment.
The Department of Mineral Resources has also assessed the Material Safety Data
Sheets (MSDS) of the Liquid Lanolin product, approval has also been granted as all
MSDS are compiled to the criteria of Worksafe Australia guidelines.
Flash Point
Testing has been undertaken to ensure the Lanolin products are safe to use in the mining
industry for both Open Cut and Underground operations.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
QUICK GUIDE APPLICATION INFORMATION
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
APPLICATION
RECOMMENDATIONS
APPLICATION
1st PREFERENCE 2nd PREFERENCE
ANCHORS/ SHACKLES GREASE SPRAY
AUTO RUSTPROOFING SPRAY GREASE
BATTERY TERMINALS GREASE SPRAY
BOAT TRAILERS SPRAY GREASE
BOAT TRAILERS SPRINGS GREASE SPRAY
CHAINS GREASE SPRAY
DOOR LOCKS, PADLOCKS
DOOR HINGESSPRAY _
DRIVE BELTS SPRAY _
ELECTRICAL
CONNECTIONSSPRAY GREASE
ELECTRIC MOTOR CONNECTIONS SPRAY GREASE
QUICK GUIDE APPLICATION INFORMATION
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
APPLICATION
RECOMMENDATIONS
APPLICATION
1st PREFERENCE 2nd PREFERENCE
ELECTROLYSIS GREASE SPRAY
FIREARMS SPRAY GREASE
FORM RELEASE & CURE SPRAY _
GOLF SHOES/SPRIGS SPRAY GREASE
HEAVY MACHINERY GREASE SPRAY
HOUSEHOLD WINDOW &
DOOR TRACKSSPRAY GREASE
IRRIGATION EQUIP GREASE SPRAY
LEATHER / VINYL SPRAY _
MACHINERY TRANSIT
PROTECTIONSPRAY _
MARINE OUTBOARD
COOLING SYSTEM
PROTECTION
SPRAY _
QUICK GUIDE APPLICATION INFORMATION
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
APPLICATION
RECOMMENDATIONS
APPLICATION
1st PREFERENCE 2nd PREFERENCE
OUTBOARD MOTORS SPRAY _
PARTS/COMPONENT
PRESERVATIONSPRAY _
POOL PUMP/FILTER SEALS
& O RINGSGREASE _
POWER HEADS SPRAY _
PROPELLERS / SKEGS GREASE SPRAY
RUBBER GASKETS, SEALS GREASE _
SADDLERY/HARNESS SPRAY GREASE
SPORTING EQUIPMENT SPRAY GREASE
STEEL PRESERVATION GREASE SPRAY
STERN DRIVE LEGS SPRAY GREASE
QUICK GUIDE APPLICATION INFORMATION
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
APPLICATION
RECOMMENDATIONS
APPLICATION
1st PREFERENCE 2nd PREFERENCE
THREAD ANTI SEIZE GREASE SPRAY
TIMBER PRESERVATION SPRAY _
WELDING ANTI SPATTER GREASE SPRAY
WINCH CABLES/WIRE ROPE GREASE SPRAY
YACHT RIGGING GREASE SPRAY
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
LANOPROTECT USER GUIDES
AROUND THE HOME
ANTENNAS/AERIALS
MARINE COATING
PROPELLER BIO ANTI-FOUL & UNDER WATER LUBRICATION
METAL PRESERVATION
MIG RELEASE AGENT
WELDING
LEATHER PRESERVATION
MINING OPERATIONS
LOCKSMITH USAGE
TIMBER PRESERVATION
Natural Lubrication & Corrosion Protection
THE LANOPROTECT USER GUIDE AROUND THE HOME
BENEFITS:
LanoProtect is an natural product that lubricates, penetrates and protects
most mechanisms and surfaces. LanoProtect leaves a non‐drying film that
does not evaporate or wash off with water providing extended lubrication
and protection. LanoProtect is not a petrochemical based product like all the
well known brands that we have used in the past, you now have an
alternative that is non‐toxic, biodegradable and environmentally friendly
that really works and in most applications out performs traditional water
dispersant, penetrant, lubricant and protection products. Try a can and you
will find how versatile this LanoProtect really is.
APPLICATIONS:
Here are some of the many examples of how LanoProtect will assist around
your home.
• Stop squeaks from hinges on gates, doors and children’s toys.
• Having trouble again with that key in a padlock or door one, a quick spray
protects and lubricates for long periods.
• Lubricate sliding doors to restore smooth action.
• Oil the bike chain and coat the bike preventing rust, LanoProtect works as well
as a polish without the elbow grease.
• Rejuvenate those dried out seals on pool pumps and filters.
• Lubricate tracks for garage doors ensuring trouble free operation.
• Protect your valuable tools from rust and corrosion.
• Release those rusted up nuts and bolts in seconds.
• Seal and Protect your Garden furniture, cladding or decking for a season
Any domestic application that requires lubrication, penetration and
protection in the rigors of everyday living can now be achieved with
LanoProtect while at the same time being kinder to our environment.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
Natural Lubrication & Corrosion Protection
USER GUIDE ANTENNAS/AERIALS
BENEFITS:
Due to the composition of dissimilar metals and high thermal cycling rates
LanoProtect provides exceptional protection to all metal antennas/aerials.
LanoProtect’s pro‐active and base metal penetration qualities safeguard your
equipment at all times, especially in severe corrosive environments.
LANOPROTECT BENEFITS:
• Penetrates joints
• Penetrates base metals
• Electrolysis is reduced
• No seizing of fittings
• Retards the oxidization process
LANOPROTECT TECHNICAL
1. Remove all flaking and oxidation with a wire brush.
2. Apply LanoProtect to the antenna installation.
3. Before application all components must be dry and should be carried out on a
warm to hot day for best results.
4. LanoProtect can be used as an anti‐seize during installation on all bolts and nuts to
protect and extend the life of your antenna.
5. LanoProtect is non‐conductive to 70Kv and will not impede electrical contacts
Lanoprotect - Superior Protection Always!
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
Natures Own Lubrication & Corrosion Protection
USER GUIDE MARINE COATING
PREPARATION:
NOTE : LANOPROTECT MARINE IS NOT AND HAS NO ANTI‐FOUL QUALITIES
BUT WILL REDUCE WATER DRAG FACTORS
ALL EQUIPMENT, WHICH HAS BEEN IN SEAWATER, SHOULD FIRST BE
WASHED DOWN WITH LIQUID CHLORINE (3:1) OR A SIMILAR CLEANER.
ALL BOAT HULLS MUST BE WASHED DOWN WITH LIQUID CHLORINE (3:1) OR
A SIMILAR CLEANER TO KILL ANY MICROSCOPIC SPORE..
FIBREGLASS HULLS
For “New” or previously untreated hulls we recommend the use of a Gelcote
sealer if one has not been applied previously, prior to the application of our
“Coating”. Surface must be CLEAN and DRY.
LanoProtect Marine should not affect the Gelcote sealer used on fiberglass
hulls and there have been no reported instances where LanoProtect Marine
has reacted with a Gelcote sealer coating. If you are unsure about applying
LanoProtect Marine it is recommended that an inconspicuous section be
coated to test for reactivity. If reaction occurs please do not apply
LanoProtect Marine.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
ALUMINIUM HULLS
Surface must be CLEAN and DRY. If heavy oxidation exists, remove with
aluminium cleaner, and then apply LanoProtect Marine.
PREVIOUSLY ANTI‐FOULED HULLS
Remove marine growth and loose anti‐foul particles thoroughly. Surface must be
CLEAN and DRY before application of our “Coating”.
MARINE APPLICATIONS:
HULLS
A LANOPROTECT MARINE Coating can be applied by:
Sprays (including airless)
Roller or brush
Generally 1 or 2 coats are sufficient.
Always allow evaporation time between coats and before launching.
Remember LANOPROTECT will always remain tacky until submerged.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
SOME OTHER MARINE APPLICATIONS
• Outboard legs, Sail Drives, Bow Thrusters
• Stern Drives Log Spigots Intake Pick‐up Grates
• Buoys, Ground Tackle
• Props, Underwater Running Gear
• General Lubrication and Protection (Windlass, Rigging, Winches)
• Protection of electrics/Battery terminals/Connections from moisture damage
• Water Proofing canvas, leather, performance clothing
• Protecting Valves, hose clips etc.
• Seal, Rejuvenate and prolong rubber (Seals, Hose, diving equipment etc.)
• Excellent Polish and will bring back to black!
SOME OTHER MARINE APPLICATIONS
Clean off with steam cleaner or hot pressure wash. Surface may be cleaned
by using Surface Prep or by hand scrubbing with hot water above 600 C.
When CLEAN and DRY, reapply as per instructions.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
MAINTENANCE
All moored hulls MUST be visually inspected, and the hull wiped down every
4– 6 weeks if required
LANOPROTECT MARINE BENEFITS SUMMARY
LANOPROTECT MARINE is a Natural Lubricant that won’t wash away, wont
evaporate, will protect, will penetrate and will seal. Without doubt
LanoProtect Marine is the most versatile marine maintenance product
available that is 100% environmentally friendly.
LANOPROTECT MARINE is the ideal marine coating because of its proven ability to
resist acid etching, i.e. barnacles. Subsequent reapplication requires no special hull
treatment such as sanding/grinding etc. Slipway or hardstand time will be greatly
reduced due to the saving in preparation and spray application time.
LANOPROTECT MARINE will not totally stop bacterial attachments, but it
drastically reduces this ongoing process and saves our marine environment.
LANOPROTECT MARINE will virtually eliminate electrolysis and will protect
against corrosion.
REPLACE ALL YOUR OLD BOTTLES AND CANS WITH
LANOPROTECT MARINE – THE ULTIMATE IN TOTAL BOAT
MAINTENANCE!
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
USER GUIDE FOR PROPELLER BIO ANTI-FOUL & UNDER WATER LUBRICATION
LanoProtect Marine Bio Anti-Foul and Underwater Lubricant is specially formulated with an
Anti-Microbial Marine Growth Inhibitor designed to give a strangling or suffocating effect of up to
650 living organisms.
LanoProtect is a long lasting environmentally friendly Anti-Foul for propellers.
LanoProtect is a very effective under water lubricant suitable for running gear applications and
much more.
LanoProtect will prevent corrosion and increase fuel efficiency.
LanoProtect can be applied on above and below water surfaces.
BENEFITS:
• 100% Eco Friendly
• Propeller Bio Anti-Foul
• Proactive Marine Growth Inhibitor
• Long Lasting Natural Protection
• Increases Fuel Efficiency
• Under Water Lubricant
• Resistant to Acid Etching
• Reduces Hydrolysis
• Protect Against Electrolysis and Corrosion.
• Easy Application & User Friendly
TECHNICAL - PROPELLER BIO ANTI-FOUL
1. Clean propeller or other fittings back to base metal and wash with a liquid pool chlorine at 3:1
ratio or a similar cleaner to kill any microscopic spore. (very important)
2. Warm LanoProtect Bio Anti-Foul until it reaches a thick liquid consistency (Honey Consistency)
by placing the jar in the Sun, hot water or microwave oven.
3. It is preferable to heat the metal propeller to between 650 C to 1000 C with a heat gun or hair
dryer.
4. Apply a thin coat of warm LanoProtect Bio Anti-Foul with brush directly onto the warm propeller
components to a thickness of approximately 1 mm and then allow to cool.
5. Reapply propeller with a second coat of warm LanoProtect Bio Anti-Foul and then lightly flash
off with heat gun or hair dryer to obtain an even and smooth finish.
6. LanoProtect is a natural product and does not affect our waterways like traditionally used
“Toxic” products.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
MARINE
Lanolin Bio Anti-Foul & LubricantLanolin Bio Anti-Foul & Lubricant
MARINE
500ml
LanoProtectLanoProtect‘Naturally Superior’‘Naturally Superior’
100%
BIODEGRADABLE &
ENVIRONMENTALLY
FRIENDLY
Propeller and Running Gear Anti-FoulProactive Marine Growth InhibitorLong Lasting Natural ProtectionIncreases Fuel efficiencyUnder Water Lubricant
100%
DA
BIODEGRADABLE
VIRONMENTALLY
100%
RONME
FRIENDLYB
RADABLE &
FRIENDENVIRONMENY
TECHNICAL - UNDER WATER LUBRICATION APPLICATIONS
1. If possible clean under water application or other fittings back to base metal and wash with a
liquid pool of chlorine at 3:1 ratio or a similar cleaner to kill any microscopic spore.
2. For best results apply warmed (Honey Consistency) LanoProtect Bio Lubricant with brush
directly onto a clean, dry, warm to hot de-scaled surface. Be careful not to heat plastics, rubber
or non ferrous material surfaces.
3. LanoProtect is a natural product and does not affect our waterways like traditionally used “Toxic”
products.
LANOPROTECT MARINE – TOTAL UNDER WATER MAINTENANCE!
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
MARINE
Lanolin Bio Anti-Foul & LubricantLanolin Bio Anti-Foul & Lubricant
MARINE
500ml
LanoProtectLanoProtect‘Naturally Superior’‘Naturally Superior’
100%
BIODEGRADABLE &
ENVIRONMENTALLY
FRIENDLY
Propeller and Running Gear Anti-FoulProactive Marine Growth InhibitorLong Lasting Natural ProtectionIncreases Fuel efficiencyUnder Water Lubricant
100%
DA
BIODEGRADABLE
VIRONMENTALLY
100%
RONME
FRIENDLYB
RADABLE &
FRIENDENVIRONMENY
NATURES OWN LUBRICATION & CORROSION PROTECTION
USER GUIDE METAL PRESERVATION
The metal preservation properties of Lanolin date back to ancient times.
With modern refinement methods, LanoProtect offers you a product that
can assist in so many ways. Machined, fabricated or ground components can
be hermetically sealed against oxidization.
BENEFITS
• Hermetic component preservation
• Remains pro‐active
• Resists acid etching
• Great anti‐seize properties
• Non‐toxic lanolin film
• Easy clean up
TECHNICAL
1. Remove all oxidation or existing scale (e.g. wire brush).
2. All surfaces must be dry and clean prior to coating.
3. Due to its pro‐active properties, LanoProtect’s protective coating will remain
operative until removed.
4. A thin film of LanoProtect should be applied to all metal surfaces prior to
storage. Lambs wool pads may also be used to apply spray to components.
5. LanoProtect Products will preserve all joints and fittings for ease of servicing.
6. Clean off with steam cleaner or hot soapy water wash above 600C.
LANOPROTECT – THE NATURAL CHOICE!
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
This mild steel bar was left
outside for 6 months.
It is obvious which side was
treated with LanoProtect
NATURES OWN LUBRICATION & CORROSION PROTECTION
LanoProtect can save you many hours of lost production time by taking away those
annoying and costly problems of Spatter.
BENEFITS
• Long life metal protection
• Component anti‐spatter release agent
• Anti‐spatter agent for fabrication work benches
• Spatter release agent for welding head
TECHNICAL
1. With Mig shields, simply dip the heated end of the hand‐piece in LanoProtect
to prevent spatter adhesion. Repeat as necessary.
2. LanoProtect should be left for 30 seconds to allow the hydrocarbon solvent to
evaporate prior to welding.
3. Application of LanoProtect to pre‐fabricated components will greatly reduce
the problem of spatter adhesion.
4. Clean off with steam cleaner or hot soapy water wash above 600C.
LANOPROTECT – A TOTAL MAINTENANCE SOLUTION
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
NATURES OWN LUBRICATION & CORROSION PROTECTION
USER GUIDE WELDING
LanoProtect can save you many hours of lost production time by taking
away those annoying and costly problems of Spatter.
Also helps preservation of weld seams and plating.
BENEFITS
• Reduction of embrittlement
• Base metal protection
• Component anti‐spatter release agent
• Anti‐spatter agent for fabrication workbenches
• Spatter release agent for welding head
• Reduces hydrolysis
• Easy to remove (Hot water wash above 600C)
TECHNICAL
1. LanoProtect is recommended for all welding situations
2. LanoProtect should be left for 30 seconds to allow the
hydrocarbon solvent to evaporate prior to welding.
3. LanoProtect should only be applied while welds are still hot
LanoProtect should only be applied to a weld with a surface
temperature of less than 1950C
4. For best results the ideal application temperature is above 650C
LanoProtect can penetrate up to 10 microns in mild steel at approximately 650C.
LANOPROTECT – A TOTAL MAINTENANCE SOLUTION
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
NATURES OWN LUBRICATION & CORROSION PROTECTION
USER GUIDE LEATHER PRESERVATION
BENEFITS
• Non‐toxic lanolin film
• Soaks in and prolongs life of leather
• Penetrates surface and prolongs leather life
• Does not evaporate or leach
• No breakdown with exposure to U. V. Rays
• No affect on stitching, saddles, tack etc.
• Rejuvenates old dried out leather to make it pliable and soft again
restoring to near original condition
• The anti‐corrosive qualities in our product will protect D’s and buckles
on saddles, screws and all metal fittings from rust and corrosion
• Non‐slip when wet
• Easy to apply
APPLICATION:
Apply LanoProtect to provide an even coating over the surface by spraying
directly onto the surface, brushing on or use a lamb’s wool applicator/Clean
Cloth. Leather that is dried out will require extra attention to rejuvenate.
As this is a penetrating liquid not a surface finish, any excess will remain
tacky and will require removal. This is easily accomplished with a terry
towelling or cotton cloth and requires light rubbing, which works the lanolin
into the leather surface and seals the surface.
Should additional applications be required in the future, simply reapply – no
special preparation is necessary.
A NATURALLY SUPERIOR MAINTENANCE SOLUTION!
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
NATURES OWN LUBRICATION & CORROSION PROTECTION
USER GUIDE MINING OPERATIONS
LanoProtect is an invaluable product for the mining industry primarily
because it will hermetically preserve or encapsulate machinery, tools and
assets.
BENEFITS
• Reduces production down time
• Allows more Maintenance to be achieved
• Generates pre‐ maintenance
• Work person friendly
• Non‐toxic lanolin film
• Dielectric performance tested to 70 kV
• Hermetic component preservation
• Reduces dismantle time & increases safety
• Remains pro‐active
• Resists acid etching
• Great Lubrication anti‐seize properties
• Reduces hydrolysis
• Environmentally friendly
• Easy clean up
TECHNICAL
1. Remove all oxidation or existing scale (e.g. wire brush).
2. For Best results all surfaces must be dry and clean prior coating.
3. When applying LanoProtect for under water applications allow 20‐30 minutes
for solvent carrier to evaporate before use.
4. LanoProtect liquid Lanolin should always be shaken well before use.
5. A thin film of LanoProtect should be applied to all machinery, tools, electrics
and other assets prior to storage. Rag or cloth may also be used to apply spray
or grease to components where practical.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
MINING APPLICATIONS
a) Roof Bolters‐ Drive chains, fittings, linkages and guides.
b) Rib Bolters‐ Drive gears, fittings, linkages.
c) Miner‐ Drive chains, chassis and protective covers, linkages, fittings,
actuator pins, mounting bolts, electrical equipment and connections.
d) Shuttle Car‐ Universals and drive chains, linkages, fittings, cable level
wind system, chassis, electrical equipment and connections, Haulage
chains and flight bars, mounting bolts, actuator pins and sprockets.
e) Mobile boot end‐ Drive chains, track adjustment bolts, guides, fittings,
linkages, hinges and electrical equipment, chassis and protective covers.
f) Pumps and fan systems‐ linkages, protective covers, pump/fan housing,
electrical equipment and fittings.
g) Conveyor Belts‐ Chains, shackles, turn buckles, electrical equipment,
loop take up system, wire cables fittings, rollers, hanging brackets, pins,
drive units, nuts/bolts, belt stands and rails.
LONG WALL MINING OPERATION
a) Chock Supports‐ Fittings, linkages, electrical equipment,
b) Actuator pins, actuators, relay bars and guides.
c) Alternating Face Conveyor‐ Electrical equipment (motors etc), dog bone
bolts, chain drives, sprockets, fittings, linkages, guides, threads, main
gate and tail gate drive units.
d) Stage Loader and Crusher Unit‐ Fittings, linkages, electrical equipment,
guides, threads and bolts.
e) Pump Station‐ Pumps, electrical motors, filters, fittings, threads and bolts.
f) Conveyor Belts‐ Chains, shackles, turn buckles, loop take up system,
electrical equipment, fittings, wire cable, rollers, hanging brackets, pins,
drive units, belt stands and rails.
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
WASHING OR SCREENING PLANT:
a) Conveyor belts‐ Electrical equipment, chains, shackles, wire cables, loop
take up system, fittings, hanging brackets, pins, belt stands and rails.
b) Electrical Equipment‐ Motors, fittings, connections, lighting, camera
surveillance systems, transformers, circuit breakers and distribution
panels.
c) Screening & washing system‐ Electrical equipment, drive units, chains,
wire rope, pins, fittings, slides, nuts & bolts.
MAINTENANCE
Continuous use of LanoProtect at regular service intervals will enhance and
preserve your valuable assets, and at the same time reduce Production
down time and maintenance cost.
REAPPLICATION
1. Clean off with steam cleaner or hot soapy water wash above 600C.
White spirit, kerosene, degreaser.
2. When CLEAN and DRY, reapply as per instructions.
PROTECT THE ENvIRONMENT & PROTECT YOUR EqUIPMENT!
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
NATURES OWN LUBRICATION & CORROSION PROTECTION
USER GUIDE LOCKSMITH USAGE
LANOPROTECT AEROSOL
• Any moveable parts eg; gate latches, springs, dead latches, deadbolts
• All security door locks with wafer cylinders
• Where window locks and patio bolts may be affected by any corrosive
environment
• Great for car door latches and all mechanical arms in doors where
grease has hardened
• Spray on striker plates to prevent rusting on screws and plates
• Great on sharpening stone for chisels
• In pin tumbler cylinders when trying to pick and pins are sticking‐ must
clean off when lock is repined
• Great on hinges affected by corrosion to stop squeaking
• All rollers
• Lubricant/coolant when drilling stainless steel
• Screw lubricant for all metals and hardwood
• On all wafer locks – car ignitions
• Letter box locks
• Old mortice locks for movement and corrosion protection
• Safe bolt mechanisms
• Any screws – for anti seize, especially steel and aluminium
LANOPROTECT – AN ENvIRONMENTALLY FRIENDLY ALTERNATIvE
TO PETROLEUM BASED MAINTENANCE PRODUCTS TECHNICAL
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com
TIMBER PRESERVATION
BENEFITS
• Non‐toxic lanolin film
• Penetrates surface and prolongs timber life
• Does not evaporate or leach
• No breakdown with exposure to U. V. Rays
• Highlights the natural timber grain
• Seals timber to prevent moisture loss or gain, thereby
• protecting against rotting, splitting and drying out
• The anti‐corrosive qualities in the oil will protect nails, screws and all metal
fittings from rust and corrosion.
• Non‐slip when wet
• Easy to apply to all external timbers
APPLICATION:
• Apply LanoProtect evenly coating the surface. Dry patches will need extra
attention to achieve an even finish. Best results achieved with lambs wool
applicators.
• As this is a penetrating liquid and not a surface finish, any excess will remain
tacky and must be removed. This is easily accomplished with a terry towelling
cloth and requires only light rubbing. Buffing of the surface will provide best
finish.
• Should additional applications be desired in the future, simply reapply – no
special preparation is necessary.
LANOPROTECT – NATURALLY SUPERIOR!
LanoProtectLanoProtect‘Naturally Superior’
www.lanoprotect.com