Laminar Air Low Controller - 4.imimg.com · Laminar Air Flow Controller Model No: LAF A laminar...
Transcript of Laminar Air Low Controller - 4.imimg.com · Laminar Air Flow Controller Model No: LAF A laminar...
www.sanyotechnologyindia.com
Laminar Air Flow Controller Model No: LAF
A laminar flow cabinet is a carefully enclosed bench designed to prevent contamination of semiconductor wafers, biological samples, or any particle sensitive materials. Air is drawn through a HEPA filter and blown in a very smooth, laminar flow towards the user. The cabinet is usually made of stainless steel with no gaps or joints where spores might collect. Such cabinet exist in both horizontal and vertical configurations, and there are many different types of cabinets with a variety of airflow patterns and acceptable uses. Laminar flow cabinets may have a UV-C germicidal lamp to sterilize the interior and contents before usage to prevent contamination of experiment. Germicidal lamps are usually kept on for 15 minutes to sterilize the interior and no contact is to be made with a laminar flow hood during this time. During this time, scientists normally prepare other materials to maximize efficiency. (It is important to switch this light off during use, to limit exposure to skin and eyes as stray ultraviolet light emissions can cause cancer and cataracts. Sanyo’s LAF series Laminar Air Flow Controller Full fill the interlocks also measure and control various parameter by guide line.
INTRODUCTION
www.sanyotechnologyindia.com
� Advanced Micro controller based. � 128x64 monochrome Graphical LCD Display
for Programming & various user informatical messages.
� Direct access to Blower, U.V., Lamp & Socket through 4-Soft touch ON/OFF Action key with LED indication.
� Two Digital Reed inputs for sash window. � Inbuilt U.V. Hour & filter life meter with
Reset Option. � Blower Speed controlling. � Pressure monitoring. � Temperature monitoring & controlling. � Air velocity measurement.
� A parallel port dot matrix printer (EPSON LX-300) interface.
� PC connectivity via RS-485 multi-drop facility.
� MODBUS RTU or Proparitory software protocol.
� PC interface with Sanyo SCADA compatible with any OS
� (USFDA 21CFR Part11 Compliance) � Easy to installation & user friendly wiring. � Soft touch Membrane keypad. � Supply 90 to 260 VAC @ 50 Hz � flush wall mounting � Size 80(H)x135(W) mm.
TYPE Advanced Microcontroller based.
INDICATION Display Status
128x64 monochrome Graphical LCD Display Function Details
Blower ( RED LED) ON / OFF status Light ( RED LED) ON / OFF status Socket ( RED LED) ON / OFF status U.V. ( RED LED) ON / OFF status Safe/Unsafe Bi-colour ( Red/Green LED)
Safe/Unsafe status
PROGRAMMING & ACTION
4- Keys
Key Function Menu/Shift Enter and Exit from programming mode and the digit while setting
the Parameters. INC Changing (Increment) parameter while in parameter edit mode.
/ sash window position control(optional) DEC Changing (decrement) parameter while in parameter edit mode.
/ sash window position control(optional) ENT To enter into parameter edit mode while in programming mode.
To save parameter while in edit mode Blower ON/OFF Control Light ON/OFF Control Socket ON/OFF Control U.V. ON/OFF Control
SPECIFICATION
HIGHLIGHTS
www.sanyotechnologyindia.com
OUTPUT Relay Function Contact Type Contact Rating Contact Life Digital Audio Visual
6 nos. Blower On/Off Socket On/Off Light On/Off U.V On/Off Sash UP (Optional) Sash Down (Optional) Potential-free Change-over Contacts ( C-NO) 5A Resistive @ 120/240 Vac > 5,00,000 Operations at Rated V/I 12V/1A for outputs for magnetic locks (Each Door) Buzzer LED indication
Function Details Blower ( RED LED) ON / OFF status Light ( RED LED) ON / OFF status Socket ( RED LED) ON / OFF status U.V. ( RED LED) ON / OFF status Safe/Unsafe Bi-colour ( Red/Green LED)
Safe/Unsafe status
COMMUNICATION Serial RS-485 (Optional) parallel port dot matrix printer (EPSON LX-300) interface(Optional)
PHYSICAL Dimensions in mm Display Card Control Card Mounting Weight
80(H)x135(W) x40(D) 80(H)x125(W) x30(D) Flush Wall 100gms
ENVIROMENTAL Operating Temperature Humidity
-20~50 °C 0~90%, non-condensing
www.sanyotechnologyindia.com
DISPLAY CARD
Front View
Back View
FRC Connector Relay Board To Mother Board
Blower Control Output0-10VV1
V2G
RWW
+_
+_
RTDPt-100
INFlow
DownFlow
InterfacePC / Printer
Key Board Connector
Pressure or Velocity Sensor
CONTROL CARD
Front View
FRC ConnectorRelay Board To Mother Board
NCC
NO
NCCNO
NCC
NO
NCC
NO
Fan
Light
Socket
U.V. Power Supply
Sash Position Detection
Sash Up & Down Control
CONNECTION DETAILS
www.sanyotechnologyindia.com
Wall
Display Card
Sticker
45 x 75 mm
25 m m
25 mm
135 mm
80
mm
45 x10 m m
12 mm
12 mm
MOUNTING
www.sanyotechnologyindia.com
CLEAN ROOM SOLUTION’S
DATA RECORDING
SOLUTION’S Door Interlock System Controller Universal Data Logger
Man & Material Air Shower Digital Data Logger
Static and Dynamic Pass box Sanyo SCADA
Laminar Air Flow Controller
Bio-Safety Controller
Temp., Humid. & Pressure Monitors
Digital Manganic(Pressure)Gauge
Real Time Clocks
LAB EQUPMENT SOLUTION’S
PROCESS INSTRUMENT’S
Autoclave System Controller Temperature & Humidity Controller
Stability Chamber Controller Universal Process PID Controller
B.O.D. Chamber Controller Universal Process Indicator
Environment Chamber Controller Loop Power Indicator
Humidity Chamber Controller Temperature Transmitters
Green Room Controller Signal Isolator
Cold Room Controller Universal Data Logger & Scanner
Walk in Chamber Controller
As per our customer-driven policy, SANYO design & develop the Products as per user requirements in Electronics Embedded System
Sanyo Technology India Office F-160,Sector-4,Airoli, Navi Mumbai-400708 Factory 3/316 Milan Industrial Estate, Kalachowki, Mumbai 400033 Email [email protected] [email protected] Contact No. 022 69999047, +91 7387555826