Lactose Biosensor Test Kit - DirectSens | Biosensors · 6/8/2016 · Lactose Biosensor Test Kit...
2
DirectSens GmbH Am Rosenbühel 38 3400 Klosterneuburg, Austria [email protected] Tel. +43 699 1835 5188 www.lactosens.com Lactose Biosensor Test Kit Fast, simple and precise detection of lactose in lactose-reduced and lactose-free milk DirectSens® developed a biosensor for the detection of residual lactose in lactose-free milk. The core element of the sensor is an optimized enzyme, which is immobilized on a disposable test strip. Using the LactoSens® Reader and the LactoSens® Software, the lactose concentration can be measured directly and accurately.
Transcript of Lactose Biosensor Test Kit - DirectSens | Biosensors · 6/8/2016 · Lactose Biosensor Test Kit...
DirectSens GmbHAm Rosenbühel 383400 Klosterneuburg, Austria
[email protected]. +43 699 1835 5188
www.lactosens.com
Lactose Biosensor Test KitFast, simple and precise detection of lactose
in lactose-reduced and lactose-free milk
DirectSens® developed a biosensor for the detection of residual lactose in lactose-free milk. The core element of the sensor is an optimized enzyme, which is immobilized on a disposable test strip. Using the LactoSens® Reader and the LactoSens® Software, the lactose concentration can be measured directly and accurately.
DirectSens GmbHAm Rosenbühel 383400 Klosterneuburg, Austria
[email protected]. +43 699 1835 5188
www.lactosens.com
Advantages• Easy sample preparation
(1:5 dilution)• Simple handling• Instant results,
< 1 minute measuring time• Very low quantitation limit,
down to 0.02%• High accuracy,
90-110% recovery
• Excellent precision,
< 5% standard deviation• Dilution buffer included• Minimum shelf life 6 months• Factory calibrated• User friendly LactoSens®
software
LactoSens® System• LactoSens® Test Kit
(LK0125 / LK0110) including:• 25 / 10 Biosensors• Dilution Buffer (LB01) • Positive Control (LC01)
• LactoSens® Reader (LR01) including:• Reader• LactoSens® Adapter (LA01)• USB camera• LactoSens® software
Easy Procedure• Dilute milk sample 1:5
(e.g. 100 µL milk plus 400 µL dilution buffer)
• Scan and unwrap a biosensor• Insert sensor into LactoSens®
Reader
• Apply 100 µL of diluted milk
sample
• Start measurement• Get result within 50 seconds
