Laboratory Testing Guide Testing Guide 2021...2002/01/27 · Our Pennsylvania Laboratory is ISO/IEC...
Transcript of Laboratory Testing Guide Testing Guide 2021...2002/01/27 · Our Pennsylvania Laboratory is ISO/IEC...
Laboratory Testing Guide Laboratory Testing Guide2021
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
2
Tabl
e of
Con
tent
sGeneral Information
3 Introduction
4 Locations
5 Operations and Services
5 Submitting Samples and Blanks
5 Shipping
5 Sampling Media
5 Confidentiality
6 Blanks for IH and Environmental Analysis
6 Radiological Samples
6 Sample Disposal
6 Analysis Fees
6 Turn-around Times
7 Payment Terms
7 Accreditations/Certifications
8 Abbreviations
Analytical Services9 Industrial Hygiene - Inorganics
20 Industrial Hygiene - Organics
61 Industrial Hygiene Profiles
64 Environmental and Wet Chemistry - Inorganics
67 Environmental and Wet Chemistry - Organics
69 Environmental and Wet Chemistry - Sample Prep
70 Powdered Metal Services
71 Mining and Mineral Services
72 Mineral Identification and Characterization
75 Asbestos Analytical Services
76 Construction Materials Laboratory Services
78 Materials and Particulate Characterization
84 Granular Activated Carbon Services
86 Gypsum, Gypsum Products, Anhydride (CaSO4) and FGD Byproducts
87 Calcium Carbonate, Limestone, Dolomite & Related Products
88 Coal, Ash & Bag House Dust
89 Talc
90 Kaolin/Kaolinite
91 Detrimental Materials, Glasses, Bioactive Glasses, Borosilicate Glasses, Ceramics
92 Pharmaceutical Analytical Services
94 Criminal Forensics (Trace Evidence)
95 Terms and Conditions
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
3
Thank you for choosing RJ Lee Group for your analytical
services needs. We are committed to providing our
clients with quality service and reliable results in a
timeframe to meet their needs. We have more than 30
years of experience as an analytical services laboratory
and have diligently served thousands of clients. Our
industrial hygiene and environmental experts are well-
informed of methodologies mandated by government
standards. Laboratory tests are conducted using standard
test methods approved and/or mandated by OSHA,
NIOSH, EPA, MSHA, ASTM and others. Our laboratory
testing services are provided in response to regulatory
requirements as well as for material and product
requirements and specifications.
Each sample is unique and given the attention necessary
to perform the required analysis. Our protocols ensure
that chains of custody are intact and sample preparation
methods maintain sample integrity. All staff follow
standard procedures to maintain our high quality
standards, and reports are issued and explained with
clarity and attention to clients’ requirements.
Our service offerings extend far beyond the testing
services listed in this document. We routinely conduct
problem-solving and investigative studies for a broad
range of industry. Our multi-disciplinary technical
staff of subject matter experts (SMEs) are available for
consultation and scientific investigations, and have
collective centuries of experience in root cause failure
analysis, remaining life assessments, corrosion studies,
product development, material identification, and
reverse engineering. This often requires project and
sample-specific testing protocols that combine multiple
existing laboratory methods into the investigation.
Method development in sample preparation or analysis is
also not uncommon and our laboratory staff, under the
direction of our SMEs, is experienced in performing and
documenting analytical methods tailored for the issues
at hand. When necessary, this investigative approach
provides our clients with high value results, and has
withstood regulatory and legal scrutiny because the
developed methods are guided by established standards.
RJ Lee Group Laboratory ServicesRJ Lee Group Laboratory ServicesA Higher Measure of Confidence
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
4
Locations
Pennsylvania | Headquarters350 Hochberg RoadMonroeville, PA 15146P: (724) 325-1776F: (724) 733-1799
Pennsylvania | Canonsburg4000 Town Center Boulevard, Suite 120Metso Building, First FloorCanonsburg, PA 15317(724) 416-7300
Pennsylvania | Innovation ParkSuite 256, 200 Innovation Blvd.University Park, PA 16802P: (412) 583-1209
WashingtonColumbia Basin Analytical Laboratories2710 North 20th AvenuePasco, WA 99301 P: (509) 545-4989 F: (509) 544-6010
Tennessee100 Union Valley RoadSuite 121Oak Ridge, TN 37830P: (724) 325-1776F: (724) 733-1799
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
5
Submitting Samples Samples are to be submitted to the laboratory along with appropriate chain-of-custody documentation and the following information clearly indicated:
» Sample identification
» Type of analysis requested
» Sample volume (where applicable)
» Analysis turn-around time
» Report to name, address, phone number and email address
» Bill to name, address, phone number, and email address
» Special instructions (if any)
» Signature and printed name, phone number, and email address of person remitting the sample.
Clients are encouraged to use the Chain of Custody form available on our website at www.rjleegroup.com. Multi-print carbonless forms are also available by contacting a client services representative.
ShippingThe client is responsible for all shipping costs and special handling fees (e.g., hazardous materials or international destinations) as well as costs associated with return shipping of sample containers and samples.
Sampling Media Common sampling media are provided to clients at no charge, provided the media are returned for analysis. The client is responsible for all overnight shipping charges. Clients will be responsible for the costs of any specialty media requested as well as related shipping costs.
Operations and ServicesSample Receiving HoursSamples are received Monday through Friday during normal business hours:
RJ Lee Group Headquarters Laboratory Monroeville, PA from 8 AM to 5 PM (EST)
Columbia Basin Analytical LaboratoriesPasco, WA from 8AM to 5 PM (PST)
Please notify client services if samples will be submitted outside of normal business hours. Any samples received after 12 PM or on weekends will be logged in the next business day.
Holding TimesSome samples may have preservation requirements and are subject to specified holding times. For samples that are suitable for analysis, provided and received in a timely manner we will make every effort to meet all holding time requirements prescribed for the preparation and analysis of the samples.
Hazardous WasteHazardous waste is managed in accordance with local, state, and federal regulations. The waste is segregated, bulked, neutralized, labeled for shipment, and stored by a hazardous waste technician in controlled waste storage areas. We reserve the right to return to the client, at the client’s expense, any unused portions of samples that may be considered hazardous waste.
Record RetentionRJ Lee Group retains records of laboratory analysis for the period of time required by the appropriate accrediting body, according to contract requirements, or as per client specific requests. We reserve the right to assess record retention fees for those records that, at the client’s request, are retained beyond accreditation or contract requirements. Confidentiality
All laboratory data and reports are kept strictly confidential with discretion applied toward proprietary materials and processes. Clients must provide written authorization if analytical results or reports are to be released to a third party.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
6
Turn-around Times (TAT)Unless a client indicates otherwise, all samples received will be logged and processed for standard turn-around times (TAT) as indicated below. TAT is measured in business days; for example, a sample arriving today for 1-Day TAT would be due at the end of the next business day. Same-day TAT (anything less than 24 hours) is also available for some testing services. Same day TAT requires 24-hour advance notice and samples must be received by 10 AM the day of analysis. Please contact a client service representative for more information.
Service Area Standard TAT
Industrial Hygiene 5-10
Environmental & Wet Chemistry 7-10
Specialty Chemicals & Coatings 10
Asbestos Analysis 5-10
Coal Mine Industry Testing 5-10
Construction Materials 15
Materials Characterization 5-10
Criminal Forensics 5-10
Pharmaceutical 5
Mineral Characterization/ID 10
Blanks for IH and Environmental AnalysisSome of the analytical methods listed in this document require that blanks be submitted with the samples. At a minimum, one blank sample should be included with every batch of samples submitted. When submitting large numbers of samples, typically one blank for every 10 samples should be included. Blank samples are invoiced at standard sample rates.
Radiological SamplesOur Columbia Basin Analytics Laboratory facility is licensed to handle and analyze radiological samples in a variety of matrices using a number of analytical methods. We also have the capability to conduct R&D, bench testing, and waste-form development studies. RJ Lee Group will either return samples to the client or dispose of them at client expense. Please contact us for details and pricing.
Sample DisposalSamples submitted will be stored for 30 days before being discarded unless the client notifies otherwise. Shipping and handling fees will be assessed for the return of any samples. The client will be responsible for any additional costs incurred in the disposal of unusual or hazardous material samples that do not comply with RJ Lee Group’s standard disposal practices. We reserve the right to assess sample storage fees if a client requests that samples be retained for more than 30 days.
Analysis FeesPrices listed are subject to change without prior notification. This document lists standard commercial prices for samples analyzed following specified methods. Please contact a client service representative to discuss price adjustments based on sample volume or turn-around times. Custom projects may incur additional analysis or consulting fees for test set up, data compilation, interpretation, and customized reporting.
We also offer more specialized analysis. If the method or analyte is not listed, please call. For some media, such PPI’s, POVM and Jewel Impactors cassettes, additional media fees apply. For odd chemicals, additional fees could apply for the calibration standards. Most prices listed are for single analytes and might include the preparation fee. Please call if you need pricing for multiple analytes in the same sample using the same methodology/technique.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
7
Payment Terms A copy of RJ Lee Group’s Terms & Conditions of Sale are included in this document. Unless otherwise indicated in writing (authorization by an officer of RJ Lee Group), terms of payment shall be net thirty (30) days after date of invoice. After the invoice due date, RJ Lee Group reserves the right to assess the lesser of one and one-half percent (1.5%) of the unpaid balance (annual rate of 18%) or the maximum late payment penalty charge permitted by law shall be added for each month or part thereof that payment is delinquent. RJ Lee Group has the right at any time to change the amount of credit or terms of payment or to withdraw credit and to require partial or full payment in advance as a condition of performing services. Payments shall be made regardless of the results of the testing or other services performed by RJ Lee Group. RJ Lee Group also accepts MasterCard, VISA, and American Express.
HQ - Pittsburgh East, Pennsylvania
» American Assoication for Laboratory Accreditation (A2LA)
» American Association of State Highway and Transportation Officials (AASHTO)
» American Industrial Hygiene Association - Laboratory Accreditation Program (AIHA-LAP, LLC)
» ANSI National Accreditation Board » Pennsylvania Department of Environmental
Protection (DEP) » Commonwealth of Virginia Department of
Professional and Occupational Regulation (DPOR) » Food & Drug Administration Registered (FDA
(Registration Number 1000313868) » National Voluntary Laboratory Accreditation Program
(NVLAP) » State of California ELAP » State of Maryland DHMH Office of Health Care
Quality » State of New York ELAP - Lab ID# 10884 » State of West Virginia Bureau for Public Health Office
of Environmental Health Services » Texas Forensic Science Commission » Texas Commission on Environmental Quality » US Department of Justice: Drug Enforcement
Administration (DEA)
Pasco, Washington
» American Industrial Hygiene Assocation - Laboratory accreditation Program (AIHA-LAP, LLC)
» ASME NQA-1 Compliant » State of Oregon ELAP » State of Washington Department of Ecology » State of Washington Radioactive Materials » US Department of Energy Consolidated Audit
Program (DOECAP)
Accreditations and CertificationsRJ Lee Group is committed to delivering services that not only meet, but exceed, regulatory requirements and client expectations for value, consistency, and reliability. Our Pennsylvania Laboratory is ISO/IEC 17025:2005 accreditated, and both laboratories are accredited to perform specific analyses by the entities listed below:
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
8
AbbreviationsAES Auger Electron Spectroscopy
Ag Silver Membrane
AHERA Asbestos Hazard Emergency Response Act
ASTM American Society for Testing Materials
BZ Sol Benzene Soluble
CCSEM Computer-Controlled Scanning Electron Microscopy
Charcoal Charcoal Tube
CVAA Cold Vapor, Atomic Absorption Spectrophotometry
CMS Carbon Molecular Sieve
DNPH Dinitrophenylhydrazine
DSC Differential Scanning Calorimeter
EC/OC Elemental Carbon / Organic Carbon
EDS Energy Dispersive Spectroscopy
EPA Environmental Protection Agency
FE-SEM Field Emission - Scanning Electron Microscopy
FL Fluorescence Detector
FLAA Flame Atomic Absorption Spectrophotometry
FTIR Fourier Transform Infrared Spectroscopy
GC-FID Gas Chromatography with Flame Ionization Detection
GC-ECD Gas Chromatography with Electron Capture Detection
GC-MS Gas Chromatography with Mass Spectrometric Detection
GC Gas Chromatography with Thermal Energy Analyzer
GFF Glass Fiber Filter
Grav Gravimetric
HPLC-UVHigh Performance Liquid Chromatography with UV
Detection
HPLC-UV/FLHigh Performance Liquid Chromatography with
Fluorescence and UV Detection
IC Ion Chromatography
ICP-AESInductively Coupled Plasma Atomic Emission
Spectrophotometry
ICP-MS Inductively Coupled Plasma – Mass Spectrometry
IC-UV Ion Chromatography with UV Detector
IMP Impinger
IR Infrared Spectroscopy
ISE Ion Specific Electrode
L Liter
LPM Liters Per Minute
MCE Mixed Cellulose Ester
MSA Mine Safety Appliances
MSHA Mine Safety and Health Administration
N/A Not Applicable
NC No Charge
NIOSH National Institute for Occupational Safety and Health
OSHA Occupational Safety and Health Administration
OVS OSHA Versatile Sampler
PAH Polynuclear Aromatic Hydrocarbons
PC Polycarbonate
PCB Polychlorinated Biphenyl
PCM Phase Contrast Microscopy
PLM Polarized Light Microscopy
POVM Passive Organic Vapor Monitor
PTFE Polytetrafluoroethylene Filter
PVC Polyvinyl Chloride Filter
PVC-PH Polyvinyl Chloride Pure Homopolymer Filter
SEM Scanning Electron Microscopy
STEM Scanning Transmission Electron Microscopy
TGA Thermogravimetric Analyzer
TEM Transmission Electron Microscopy
USP U.S. Pharmacopeia
UV Ultraviolet Detector
VAS Visible Absorption Spectrophotometry
XPS X-ray Photoelectron Spectroscopy
XRD X-ray Diffraction
XRF X-ray Fluorescence
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
9
Industrial HygieneIndustrial HygieneInorganics
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Aluminum (Al) 7429-90-5 NIOSH 7300 mod./NIOSH 7303
ICP-AES MCE/PVC 1 - 4 5 - 100 $42.00* 5 Day Air Each
Aluminum Oxide (Al2O3)
1344-28-1 NIOSH 7300 mod (special digestion)
ICP-AES MCE/PVC 1 - 4 5 - 100 $100.00 5 Day Air Each
Antimony (Sb) 7440-36-0 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1-4 50-2000 $42.00* 5 Day Air Each
Arsenic (As) 7440-38-2 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 2000 $42.00* 5 Day Air Each
Asbestos NIOSH 7400 PCM MCE 0.5 - 16 (See Method)
$13.00 5 Day Air Each
Asbestos NIOSH 7402 TEM MCE 0.5 - 16 (See Method)
$106.00 5 Day Air Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
10
Industrial HygieneIndustrial HygieneInorganics (cont.)
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Barium (Ba) 7440-39-3 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 50 - 2000 $42.00* 5 Day Air Each
Beryllium (Be) 7440-41-7 NIOSH 7300 mod./NIOSH 7303
ICP-MS MCE/PVC 1 - 4 1250 - 2000
$42.00* 5 Day Air Each
Beryllium Oxide (BeO)
1304-56-9 NIOSH 7300 mod (special digestion)
ICP-MS MCE/PVC 1 - 4 1250 - 2000
$50.00 5 Day Air Each
Bismuth (Bi) 1304-43-4 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 480 - 960 $42.00* 5 Day Air Each
Boron (B) 7440-42-8 NIOSH 7303 ICP-AES MCE 1 - 4 480 - 960 $42.00* 5 Day Air Each
Cadmium (Cd) 7440-43-9 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 13 - 2000 $42.00* 5 Day Air Each
Calcium (Ca) 7440-70-2 NIOSH 7300 mod./NIOSH 7303
ICP-AES MCE/PVC 2 - 4 5 - 200 $42.00* 5 Day Air Each
Calcium Hydroxide (CaOH)
1305-62-0 NIOSH 7303 ICP-AES MCE $40.00 5 Day Air Each
Calcium Oxide (CaO) 1305-78-8 NIOSH 7303 ICP-AES MCE $40.00 5 Day Air Each
Carbon Black 1333-86-4 NIOSH 5000 Gravimetric PVC - preweighed
1 - 2 30 - 570 $22.00 5 Day Air Each
Chromium (Cr) 7440-47-3 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 1000 $42.00* 5 Day Air Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
11
Industrial HygieneIndustrial HygieneInorganics (cont.)
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Chromium, Hexavalent (CrVI) Paint
18540-29-9
OSHA 215 IC-UV PVC 2 960 $75.00 5 Day Air Each
Chromium, Hexavalent (CrVI) Welding Fume/Plating Operation
18540-29-9
OSHA 215 IC-UV PVC 2 960 $60.00 5 Day Air Each
Cobalt (Co) 7440-48-4 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 25 - 2000 $42.00* 5 Day Air Each
Compendium IO-3.4 Compendium IO-3.1 / IO-3.4
ICP-AES Call 5 Day Air Each
Compendium IO-3.5 Compendium IO-3.1 / IO-3.5
ICP-MS Call 5 Day Air Each
Copper (Cu) 7440-50-8 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 1000 $42.00* 5 Day Air Each
Diesel Particulate Matter-DPM
NIOSH 5040 Thermal Optic EC/
OC
Quartz fiber 2 - 4 142 - 1920 $60.00 10 Day Air Each
Diesel Particulate Matter-DPM
NIOSH 5040 Thermal Optic EC/
OC
Jeweled impactor cassette
1.7 - 2.0 142 - 1920 $89.00 10 Day Air Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
12
Industrial HygieneIndustrial HygieneInorganics (cont.)
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Dust, Respirable NIOSH 0600 Gravimetric PVC preweighed 1.7-8.0 (size selective
sampler
dependent)
20 - 1200 $22.00 5 Day Air Each
Dust, Total NIOSH 0500 Gravimetric PVC preweighed 1 - 2 20 - 1200 $22.00 5 Day Air Each
Elemental Carbon NIOSH 5040 Thermal Optic EC/
OC
Quartz fiber 2 - 4 142 - 1920 $60.00 10 Day Air Each
Gallium (Ga) 7440-55-3 NIOSH 7303 ICP-AES/ICP-MS
MCE $50.00 5 Day Air Each
Gold (Au) 7440-57-5 NIOSH 7303 ICP-AES/ICP-MS
MCE 1 - 4 1 - 3300 $50.00 5 Day Air Each
Hafnium (Hf) 7440-65-5 NIOSH 7300 mod (special digestion)
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 200 $100.00 5 Day Air Each
Hydrochloric Acid (Hydrogen Chloride, HCl)
7647-01-0 NIOSH 7903 IC SKC 226-10-03 0.2 - 0.5 3 - 100 $55.00 5 Day Air Each
Hydrogen Bromide (HBr, Hydrobromic Acid)
10035-10-6 NIOSH 7903 IC SKC 226-10-03 0.2 - 0.5 3 - 100 $55.00 5 Day Air Each
Hydrogen Fluoride (HF)
7664-39-3 NIOSH 7903 IC SKC 226-10-03 0.2 - 0.5 3 - 100 $55.00 5 Day Air Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
13
Industrial HygieneIndustrial HygieneInorganics (cont.)
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Indium (In) 7440-74-6 NIOSH 7303 ICP-AES/ICP-MS
MCE $50.00 5 Day Air Each
Iron (Fe) 7439-89-6 NIOSH 7300 mod./NIOSH 7303
ICP-AES MCE/PVC 1 - 4 5 - 100 $42.00* 5 Day Air Each
Iron Oxide Fume (Fe) 1309-37-16 NIOSH 7303 ICP-AES MCE/PVC 1 - 4 5 - 100 $42.00* 5 Day Air Each
Lanthanum (La) 7439-91-0 NIOSH 7300 mod. ICP-AES/ICP-MS
MCE/PVC $50.00 5 Day Air Each
Lead (Pb) 7439-92-1 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 50 - 2000 $20.00 5 Day Air Each
Lead oxide (Pb) 1317-36-8 NIOSH 7303 ICP-AES/ICP-MS
MCE 1 - 4 50 - 2000 $42.00* 5 Day Air Each
Lead (Pb) 7439-92-1 EPA 3050/EPA 6010C ICP-AES Soil $20.00 5 Day Solid/Bulk
Each
Lead (Pb) 7439-92-1 EPA 3050/EPA 6010C ICP-AES Paint $20.00 5 Day Solid/Bulk
Each
Lead (Pb) (Determination of surface contamination by lead and its compounds)
7439-92-1 EPA 3050/EPA 6010C ICP-AES ASTM certified wipe
1 - 2 $20.00 5 Day Wipe Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
14
Industrial HygieneIndustrial HygieneInorganics (cont.)
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Lithium (Li) 7439-93-2 NIOSH 7300 mod. ICP-AES/ICP-MS
MCE/PVC 1 - 4 100 - 2000 $42.00* 5 Day Air Each
Magnesium (Mg) 7439-95-4 NIOSH 7300 mod./NIOSH 7303
ICP-AES MCE/PVC $42.00* 5 Day Air Each
Manganese (Mn) 7439-96-5 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 200 $42.00* 5 Day Air Each
Mercury (Hg) Particulate
7439-97-6 OSHA 145 CVAA MCE 2 10 $55.00 5 Day Air Each
Mercury (Hg) Passive 7439-97-6 OSHA 140 CVAA SKC 520-02A/520-03
0.02 9.6 $55.00 5 Day Air Each
Mercury (Hg) Vapor or Particulate
7439-97-6 NIOSH 6009 CVAA 226-17-1A 0.15 - 0.25
2 - 100 $55.00 5 Day Air Each
Mercury (Hg) Wipes 7439-97-6 OSHA 145 CVAA Wipe $55.00 5 Day Wipe Each
Molybdenum (Mo) 7439-98-7 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 67 $42.00* 5 Day Air Each
Neodymium (Nd) 7440-00-8 NIOSH 7303 ICP-AES/ICP-MS
MCE $60.00 5 Day Air Each
Nickel (Ni) 7440-02-0 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 1000 $42.00* 5 Day Air Each
Nitric Acid (HNO3) 7697-37-2 NIOSH 7903 IC SKC 226-10-03 0.2 - 0.5 3 - 100 $55.00 5 Day Air Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
15
Industrial HygieneIndustrial HygieneInorganics (cont.)
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Nuisance Dust, Respirable
NIOSH 0600 Gravimetric PVC - preweighed
1.7-8.0 (Size selective
sampler
dependant)
20 - 1200 $22.00 5 Day Air Each
Nuisance Dust, Total NIOSH 0500 Gravimetric PVC - preweighed
1 - 2 20 - 1200 $22.00 5 Day Air Each
Ozone 10028-15-6 OSHA 214 IC SKC 225-9014 1.5 90 $65.00 5 Day Air Each
Palladium (Pd) 7440-05-3 NIOSH 7303 ICP-AES/ICP-MS
MCE $50.00 5 Day Air Each
Particulates not otherwise regulated, Respirable
NIOSH 0600 Gravimetric PVC - preweighed 1.7-8.0 (Size selective
sampler
dependent)
20-1200 $22.00 5 Day Air Each
Particulates not otherwise regulated, Total
NIOSH 0500 Gravimetric PVC - preweighed
1.5 - 2.0 20 - 1200 $22.00 5 Day Air Each
Phosphoric Acid (H3PO4)
7664-38-2 NIOSH 7903 IC SKC 226-10-03 0.2 - 0.5 3 - 100 $55.00 5 Day Air Each
Phosphorus (P) 7723-14-0 NIOSH 7300 mod./NIOSH 7303
ICP-AES MCE/PVC $40.00 5 Day Air Each
Platinum (Pt) 7440-06-4 NIOSH 7303 ICP-AES/ICP-MS
MCE 1 - 4 200 - 5000 $50.00 5 Day Air Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
16
Industrial HygieneIndustrial HygieneInorganics (cont.)
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Potassium (K) 7440-09-7 NIOSH 7300 mod./NIOSH 7303
ICP-AES MCE/PVC 1 - 4 5 - 1000 $42.00* 5 Day Air Each
Selenium (Se) 7782-49-2 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 13 - 2000 $42.00* 5 Day Air Each
Silica, Respirable Crystalline ( ~5 ug nominal reporting limit for Quartz - Cristobalite and Tridymite) and Dust
Various NIOSH 7500/0600 XRD/Grav PVC - preweighed
1.7-8.0 (Size selective
sampler
dependant)
400 - 1000 $96.00 5 day Air Each
Silica, Respirable Crystalline (~2.5 ug nominal reporting limit for Quartz ~5 ug nominal reporting limit for Cristobalite and Tridymite) and Dust
Various NIOSH 7500/0600 XRD/Grav PVC - preweighed
1.7-8.0 (Size selevtive
sampler
dependant)
400 - 1000 $192.00 10 day Air Each
Silver (Ag) 7440-22-4 NIOSH 7300 mod. ICP-AES/ICP-MS
MCE/PVC 1 - 4 250 - 2000 $42.00* 5 Day Air Each
Sodium (Na) 7440-23-5 NIOSH 7303 ICP-AES MCE 1 - 4 13 - 2000 $42.00* 5 Day Air Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
17
Industrial HygieneIndustrial HygieneInorganics (cont.)
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Strontium (Sr) 7440-24-6 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 10 - 1000 $42.00* 5 Day Air Each
Sulfuric Acid (H2SO4) 7664-93-9 NIOSH 7903 IC SKC 226-10-03 0.2 - 0.5 3 - 100 $55.00 5 Day Air Each
Tantalum (Ta) 7440-25-7 NIOSH 7300 mod (special digestion)
ICP-AES MCE/PVC 1 - 4 200 - 400 $100.00 5 Day Air Each
Tellurium (Te) 13494-80-9
NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 25 - 2000 $50.00 5 Day Air Each
Thallium (Tl) 7440-28-0 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 25 - 2000 $42.00* 5 Day Air Each
Tin (Sn) 7440-31-5 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 500 $42.00* 5 Day Air Each
Titanium (Ti) 7440-32-6 NIOSH 7300 mod./7303 ICP-AES/ICP-MS
MCE/PVC $40.00 5 Day Air Each
Titanium Dioxide (TiO2)
13463-67-7 NIOSH 7300 mod (special digestion)
ICP-AES/ICP-MS
MCE/PVC 1 - 4 100 - 1000 $100.00 5 Day Air Each
Total Particulate NIOSH 0500 Gravimetric PVC - preweighed
1 - 2 20 - 1200 $22.00 5 Day Air Each
Tungsten (W) 7440-33-7 NIOSH 7300 mod (special digestion)
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 1000 $100.00 5 Day Air Each
Vanadium (V) 7440-62-6 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 2000 $42.00* 5 Day Air Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
18
Industrial HygieneIndustrial HygieneInorganics (cont.)
Analyte CAS # Method Technique Sampling Media Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Welding Fume Particulate
NIOSH 0500 Gravimetric PVC - preweighed or Matched-wight
MCE
1 - 4 200 - 1200 $22.00 5 Day Air Each
Yttrium (Y) 7440-65-5 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 200 $50.00 5 Day Air Each
Zinc (Zn) 7646-85-7 NIOSH 7300 mod./NIOSH 7303
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 200 $42.00* 5 Day Air Each
Zinc Oxide (ZnO) 1314-13-2 NIOSH 7303 ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 200 $42.00* 5 Day Air Each
Zirconium (Zr) 7440-67-7 NIOSH 7300 mod. ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 200 $42.00* 5 Day Air Each
Zirconium Oxide (ZrO2)
1314-23-4 NIOSH 7300 mod (special digestion)
ICP-AES/ICP-MS
MCE/PVC 1 - 4 5 - 200 $100.00 5 Day Air Each
*Compatible analytes billed at $22
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
19
Industrial HygieneIndustrial Hygiene
Solids and Hazardous Waste
Analyte CAS # Method Technique Sampling Media Price TAT Matrix Unit
Lead (Pb) 7439-92-1 EPA 3050/ EPA 6010C ICP-AES Soil $20.00 5 Day Solid/Bulk Each
Lead (Pb) 7439-92-1 EPA 3050/ EPA 6010C ICP-AES Paint $20.00 5 Day Solid/Bulk Each
Lead (Pb) (Determination of surface contamination by lead and its compounds)
7439-92-1 EPA 3050/ EPA 6010C ICP-AES ASTM certified wipe
$35.00 5 Day Wipe Each
Inorganics (cont.)
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
20
Industrial HygieneIndustrial HygieneOrganics
Analyte CAS # Method Technique Sampling Media
Sampling Rate
Suggested Volume
Price TAT Matrix Unit
1, 1, 2 - Trichloroethane 79-00-5 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 2 - 60 $55.00 10 Day Air Each
1, 1, 2 - Trichloroethane 79-00-5 OSHA 11 GC-FID SKC 226-01 0.2 10 $55.00 10 Day Air Each
1, 1, 2 - Trichloroethane 79-00-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
1, 1, 1 - Trichloroethane (methyl chloroform)
71-55-6 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 0.1 - 8 $55.00 10 Day Air Each
1, 1, 1 - Trichloroethane (methyl chloroform)
71-55-6 OSHA 14 GC-FID SKC 226-01 0.2 3 $55.00 10 Day Air Each
1, 1, 1 - Trichloroethane (methyl chloroform)
71-55-6 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
1, 1, 2 -Trichloro-1 , 2 , 2 -trifluoroethane (Refrigerant 113)
76-13-1 OSHA 113 Mod
GC-FID POVM SKC 575-001
$70.00 10 Day Air Each
1, 1, 2 -Trichloro-1 , 2 , 2 -trifluoroethane (Refrigerant 113)
76-13-1 NIOSH 1020
GC-FID (2) SKC 226-01
0.01 - 0.05 0.1 - 3 $70.00 10 Day Air Each
1, 1-Dichloroethane 75-34-3 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 0.5 - 15 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
21
Industrial HygieneIndustrial HygieneOrganics (cont.)
Analyte CAS # Method Technique Sampling Media
Sampling Rate
Suggested Volume
Price TAT Matrix Unit
1, 1-Dichloroethane 75-34-3 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
1, 2, 3 - Trichloropropane
96-18-4 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 0.6 - 60 $55.00 10 Day Air Each
1, 2, 3 - Trichloropropane
96-18-4 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
1, 2, 3 - Trimethylbenzene
526-73-8 NIOSH 1502
GC-FID SKC 226-01 0.01 - 0.2 10 - 30 $55.00 10 Day Air Each
1, 2-Dichloroethylene 540-59-0 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 0.2 - 5 $55.00 10 Day Air Each
1, 2-Dichloroethylene 540-59-0 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
6 hrs $55.00 10 Day Air Each
1, 3 Butylene Glycol (1,3 Butanediol)
107-88-0 NIOSH 5523
GC-FID GFF & SKC 226-57
0.5 - 2.0 5 - 60 $70.00 10 Day Air Each
1,6-Hexamethylene Diisocyanate (HDI)
822-06-0 OSHA 42 HPLC SKC 225-9002
1 15 $100.00 10 Day Air Each
1-Methoxy-2-Propanol (Propylene glycol methylether)
107-98-2 OSHA 99 GC-FID SKC 226-01 0.1 5 - 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
22
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
1-Methoxy-2-Propanol Acetate (Propylene glycol methyl ether acetate)
108-65-6 OSHA 99 GC-FID POVM SKC 575-002
$55.00 10 Day Air Each
2, 4 -Toluene Diisocyanate (TDI)
584-84-9 OSHA 42 HPLC-UV SKC 225-9002
1 15 $100.00 10 Day Air Each
2, 6 -Toluene Diisocyanate (TDI)
91-08-7 OSHA 42 HPLC-UV SKC 225-9002
1 15 $100.00 10 Day Air Each
2-Butanone (MEK) 78-93-3 OSHA 1004 GC-FID POVM 3M 3520 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
2-Butanone (MEK) 78-93-3 NIOSH 2500
GC-FID SKC 226-81A 0.01 - 0.2 0.25 - 12 $55.00 10 Day Air Each
2-Butoxyethanol (Butyl Cellosolve)
111-76-2 OSHA 83 GC-FID SKC 226-01 0.1 48 $55.00 10 Day Air Each
2-Butoxyethanol (Butyl Cellosolve)
111-76-2 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
2-Butoxyethanol (Butyl Cellosolve)
111-76-2 NIOSH 1403
GC-FID SKC 226-01 0.01 - 0.05 2 - 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
23
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
2-Butoxyethyl acetate (Butyl Cellosolve Acetate)
112-07-2 OSHA 83 GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
2-Butoxyethyl acetate (Butyl Cellosolve Acetate)
112-07-2 OSHA 83 GC-FID SKC 226-01 0.1 48 $55.00 10 Day Air Each
2-Ethoxyethoxy Ethanol (Carbitol )
111-90-0 NIOSH 1403
GC-FID SKC 226-01 0.01 - 0.05 10 $55.00 10 Day Air Each
2-Ethoxyethoxy Ethanol (Carbitol )
111-90-0 NIOSH 1403 mod.
GC-FID POVM SKC 575-001 or
002
8 hrs $55.00 10 Day Air Each
2-Heptanone (Methyl n-Amyl ketone)
110-43-0 NIOSH 1301 GC-FID SKC 226-01 0.01 - 0.2 1 - 25 $55.00 10 Day Air Each
2-Heptanone (Methyl n-Amyl ketone)
110-43-0 NIOSH 2553
GC-FID SKC 225-121 0.01 - 0.2 1 - 25 $55.00 10 Day Air Each
2-Heptanone (Methyl n-Amyl ketone)
110-43-0 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
2-Methoxyethanol 109-86-4 NIOSH 1403
GC-FID SKC 226-01 0.01 - 0.05 1 - 6 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
24
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
2-Methoxyethanol 109-86-4 NIOSH 1403
GC-FID SKC 226-01 0.01 - 0.05 6 - 50 $55.00 10 Day Air Each
4-Vinyl Toluene, 3-vinyl Toluene
39294-88-7 NIOSH 1501 GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
4,4 - Methylene diphenyl diisocycanate
101-68-8 OSHA 42 HPLC SKC 225-9002
1 15 $100.00 10 Day Air Each
5-Methyl-3-Heptanone 541-85-5 NIOSH 1301 GC-FID SKC 226-01 0.01 - 0.2 1 - 25 $55.00 10 Day Air Each
5-Methyl-3-Heptanone 541-85-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Acenaphthylene 208-96-8 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 5000 $100.00 10 Day Air Each
Acenapthene 83-32-9 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Acetaldehyde 75-07-0 NIOSH 2539
HPLC-UV SKC 226-118 0.01 - 0.05 5 $100.00 10 Day Air Each
Acetone 67-64-1 NIOSH 1300
GC-FID SKC 226-01 0.01 - 0.20 0.5 - 3.0 $55.00 10 Day Air Each
Acetone 67-64-1 OSHA 69 GC-FID ORBO 91 0.05 3 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
25
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Acetone 67-64-1 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-002
2 hrs $55.00 10 Day Air Each
Acetonitrile 75-05-8 NIOSH 1606
GC-FID SKC 226-09 0.01 - 0.20 1 - 25 $55.00 10 Day Air Each
Acetonitrile 75-05-8 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-001
or 002
2 hrs $55.00 10 Day Air Each
Acrolein 107-02-8 NIOSH 2539
GC-FID & GC-MS
SKC 226-118 0.01 - 0.05 48 $100.00 10 Day Air Each
Acrylonitrile 107-13-1 NIOSH 1604
GC-FID SKC 226-01 0.01 - 0.2 3.5 - 20 $100.00 10 Day Air Each
Allyl Alcohol 107-18-6 NIOSH 1402
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Allyl Alcohol 107-18-6 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
a-Methyl Styrene 98-83-9 NIOSH 1501 GC-FID SKC 226-01 0.01 - 0.2 1 - 30 $55.00 10 Day Air Each
a-Methyl Styrene 98-83-9 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
26
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Aniline 62-53-3 NIOSH 2002
GC-FID SKC 226-10 0.02 - 0.20 5.0 - 30 $70.00 10 Day Air Each
Aniline 62-53-3 NIOSH 2017
GC-FID SKC 225-9004 & SKC
226-15
0.1 - 0.2 5 - 50 $100.00 10 Day Air Each
Aniline 62-53-3 OSHA PV2079
GC-FID SKC 226-98 0.2 30 $70.00 10 Day Air Each
Anthracene 120-12-7 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Benz (a) anthracene 56-55-3 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Benzene 71-43-2 OSHA 1005 GC-FID POVM 3M 3500, SKC
575-001,002
8 hrs $55.00 10 Day Air Each
Benzene 71-43-2 NIOSH 1501 GC-FID SKC 226-01 0.01 - 0.2 5 - 30 $55.00 10 Day Air Each
Benzene Sol (Coal Tar Pit Vol, Asphalt Fumes)
8052-42-4 NIOSH 5042 / 0500
Grav. / BZSOL PTFE - Preweighed
1 - 4 28 - 400 $75.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
27
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Benzene Sol (Coal Tar Pit Vol, Asphalt Fumes) Additional characterization by HPLC available
Various OSHA 58 Grav. / BZSOL GFF 2 960 $75.00 10 Day Air Each
Benzene, Ethyl Benzene, Toluene and Xylene, Total Hydrocarbon (VOC as Hexane)
Various NIOSH 1501 GC-FID SKC 226-01 3M 3500,
POVM or SKC 575-001 or
002
0.1 - 0.5 10 $70.00 10 Day Air Each
Benzo (a) pyrene 50-32-8 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Benzo (b) fluoranthene 205-99-2 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Benzo (e) pyrene 192-97-2 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Benzo (ghi) perylene 191-24-2 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Benzo (k) fluoranthene 207-08-9 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Benzyl Acetate 140-11-4 OSHA PV2124
GC-FID SKC 226-73 0.02 - 0.05 10 $70.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
28
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Benzyl Chloride 100-44-7 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.20 8 - 50 $55.00 10 Day Air Each
Benzyl Chloride 100-44-7 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Biphenyl (Diphenyl) 92-52-4 NIOSH 2530
GC-FID SKC 226-35-01
0.01 - 0.5 15 - 30 $55.00 10 Day Air Each
Bromoform 75-25-2 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 4 - 70 $55.00 10 Day Air Each
Bromoform 75-25-2 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
Butyl Acrylate 141-32-2 NIOSH 1450 mod.
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Butyl Carbitol (Diethylene Glycol Monobutyl Ether)
112-34-5 NIOSH 1403 mod.
GC-FID SKC 226-01 0.01 - 0.05 2 - 10 $55.00 10 Day Air Each
Butyl Carbitol (Diethylene Glycol Monobutyl Ether)
112-34-5 NIOSH 1403 mod.
GC-FID SKC 575-002 8 hrs $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
29
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Butyl Cellosolve (2-Butoxyethanol)
111-76-2 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Butyl Cellosolve (2-Butoxyethanol)
111-76-2 NIOSH 1403
GC-FID SKC 226-01 0.01 - 0.05 2 - 10 $55.00 10 Day Air Each
Butyraldehyde 123-72-8 NIOSH 2539 mod.
HPLC-UV SKC 226-118 0.01 - 0.05 5 $100.00 10 Day Air Each
Camphor 76-22-2 NIOSH 1301 GC-FID SKC 226-01 0.01 - 0.2 1 - 25 $55.00 10 Day Air Each
Camphor 76-22-2 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Carbitol (2-Ethoxyethoxy Ethanol)
111-90-0 NIOSH 1403 mod.
GC-FID SKC 226-01 0.01 - 0.05 10 $55.00 10 Day Air Each
Carbon Tetrachloride 56-23-5 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 3 - 150 $55.00 10 Day Air Each
Carbon Tetrachloride 56-23-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
30
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Cellosolve (2-Ethoxyethanol)
110-80-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Cellosolve Acetate (2-Ethoxyethyl Acetate)
111-15-9 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Cellosolve Acetate (2-Ethoxyethyl Acetate)
111-15-9 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Cellosolve Acetate (2-Ethoxyethyl Acetate)
111-15-9 OSHA 53 GC-FID SKC 226-01 0.1 10 $55.00 10 Day Air Each
Chlorobenzene 108-90-7 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 1.5 - 40 $55.00 10 Day Air Each
Chlorobenzene 108-90-7 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Chlorobromomethane 74-97-5 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 0.5 - 60 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
31
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Chlorobromomethane 74-97-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Chloroform 67-66-3 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 1.0 - 50 $55.00 10 Day Air Each
Chloroform 67-66-3 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
Chloroprene (2-Chloro-1,3-butadiene)
126-99-8 OSHA 112 GC-FID SKC 226-111A 0.05 6 $55.00 10 Day Air Each
Chloroprene (2-Chloro-1,3-butadiene)
126-99-8 NIOSH 1002
GC-FID SKC 226-01 0.01 - 0.10 1.5 - 8 $55.00 10 Day Air Each
Chrysene 218-01-9 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Coal Tar Naphtha Various NIOSH 1550
GC-FID SKC 226-01 0.01 - 0.2 1.3 - 20 $70.00 10 Day Air Each
Coal Tar Naphtha Various NIOSH 1550
GC-FID POVM 3M 3500 POVM
SKC
8 hrs $70.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
32
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Coal Tar Pitch Volatiles Additional characterization by HPLC available
65996-93-2 OSHA 58 Grav. / BZSOL GFF 2 960 $75.00 10 Day Air Each
Cumene 92-82-8 NIOSH 1501 GC-FID SKC 226-01 0.01 - 0.2 1 - 30 $55.00 10 Day Air Each
Cumene 92-82-8 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Cyclohexane 110-82-7 NIOSH 1500
GC-FID SKC 226-01 0.01 - 0.20 2.5 - 5 $55.00 10 Day Air Each
Cyclohexane 110-82-7 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
6 hrs $55.00 10 Day Air Each
Cyclohexanol 108-93-0 NIOSH 1402
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Cyclohexanol 108-93-0 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Cyclohexanone 108-94-1 NIOSH 1300
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Cyclohexanone 108-94-1 OSHA 01 GC-FID SKC 226-110 0.02-0.05 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
33
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Cyclohexanone 108-94-1 NIOSH 1500 Mod
GC-FID POVM 3M 3500
8 hrs $55.00 10 Day Air Each
Cyclohexene 110-83-8 NIOSH 1500
GC-FID SKC 226-01 0.01- 0.2 5 - 7 $55.00 10 Day Air Each
Cyclohexene 110-83-8 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Cyclopentane 287-92-3 NIOSH 1500 Mod
GC-FID SKC 226-01 0.2 5 $55.00 10 Day Air Each
Cyclopentane 287-92-3 NIOSH 1500 Mod
GC-FID POVM 3M 3520, POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
Diacetone Alcohol 123-42-2 NIOSH 1402
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Diacetone Alcohol 123-42-2 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Dibenz (a,h) anthracene
53-70-3 NIOSH 5506
HPLC-UV/FL PTFE & SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Dibutylphthalate 84-74-2 NIOSH 5020
GC-FID MCE/PVC 1 - 3 6 - 200 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
34
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Dibutylphthalate 84-74-2 OSHA 104 GC-FID SKC 226-56 1 240 $55.00 10 Day Air Each
Dichlorofluoromethane 75-43-4 NIOSH 2516
GC-FID (2) SKC 226-09
0.01 - 0.05 0.25 - 3.0 $70.00 10 Day Air Each
Dichloromethane (Methylene Chloride)
75-09-2 NIOSH 1005
GC-FID (2) SKC 226-01
0.01 - 0.2 0.5 - 2.5 $70.00 10 Day Air Each
Dichloromethane (Methylene Chloride)
75-09-2 OSHA 80 GC-FID ORBO 91 0.05 3 $70.00 10 Day Air Each
Dichloromethane (Methylene Chloride)
75-09-2 NIOSH 1005 mod.
GC-FID SKC 575-001 8 hrs $70.00 10 Day Air Each
Diesel Fuel NIOSH 1550
GC-FID SKC 226-01 Send reference
material in separate shipment
0.01 - 0.2 1.3 - 20 $70.00 10 Day Air Each
Diethyl Ether (Ethyl Oxide)
60-29-7 NIOSH 1610 mod.
GC-FID POVM 3M 3520 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
Diethyl Ether (Ethyl Oxide)
60-29-7 NIOSH 1610 GC-FID SKC 226-01 0.01 - 0.2 0.25 - 3.0 $55.00 10 Day Air Each
Diethyl Ether (Ethyl Oxide)
60-29-7 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-001
4 hrs $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
35
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Diethylene Glycol 111-46-6 NIOSH 5523
GC-FID GFF & SKC 226-57
0.5 - 2.0 5 - 60 $70.00 10 Day Air Each
Diethylene Glycol Monoethyl Ether
111-90-0 NIOSH 1403 mod.
GC-FID POVM SKC 575-002
4 - 8 hrs $70.00 10 Day Air Each
Diisobutyl Ketone 108-83-8 NIOSH 1300
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Diisobutyl Ketone 108-83-8 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Diisooctylphthalate (bis (2-ethylhexyl)-phthalate)
117-81-7 NIOSH 5020
GC-FID MCE/PVC 1 - 3 10 - 200 $55.00 10 Day Air Each
Dimethoxymethane (Methylal)
109-87-5 NIOSH 1611 GC-FID SKC 226-01 0.01 - 0.2 1 - 3 $55.00 10 Day Air Each
Dimethoxymethane (Methylal)
109-87-5 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-001
1 hrs $55.00 10 Day Air Each
Dimethylacetamide 127-19-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500
8 hrs $55.00 10 Day Air Each
Dimethylacetamide (N,N-dimethylacetamide)
127-19-5 NIOSH 2004
GC-FID SKC 226-10 0.01 - 1 15 - 80 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
36
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Dimethylformamide 68-12-2 NIOSH 2004
GC-FID SKC 226-10 0.01 - 1.0 15 - 80 $55.00 10 Day Air Each
Dimethylformamide 68-12-2 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Di-n-Octyl Phthalate (DNOP)
117-84-0 OSHA 104 GC-FID SKC 226-56 1.0 - 3.0 10 - 240 $55.00 10 Day Air Each
Dipropylene Glycol Methyl Ether
34590-94-8 NIOSH 1403 mod.
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Dipropylene Glycol Methyl Ether
34590-94-8 NIOSH 1403 mod.
GC-FID SKC 226-01 0.01 - 0.05 5 - 10 $55.00 10 Day Air Each
Divinylbenzene 1321-74-0 OSHA 89 GC-FID SKC 226-73 0.05 12 $70.00 10 Day Air Each
Divinylbenzene 1321-74-0 OSHA 89 GC-FID POVM 3M 3500
8 hrs $70.00 10 Day Air Each
Epichlorohydrin 106-89-8 NIOSH 1010 GC-FID SKC 226-01 0.01 - 0.2 2 - 30 $55.00 10 Day Air Each
Epichlorohydrin 106-89-8 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Esters 1 (one analyte) Various NIOSH 1450
GC-FID SKC 226-01 0.01-0.2 1.0 - 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
37
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Ethanol (Ethyl Alcohol) 64-17-5 NIOSH 1400
GC-FID SKC 226-01 0.01 - 0.2 0.1 - 1 $55.00 10 Day Air Each
Ethanol (Ethyl Alcohol) 64-17-5 OSHA 5001 GC-FID SKC 226-82(Two Tubes in
Series)
0.05 12 $100.00 10 Day Air Per Set
Ethanol (Ethyl Alcohol) 64-17-5 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-002
1 hrs $55.00 10 Day Air Each
Ethanol (Ethyl Alcohol) 64-17-5 NIOSH 1400 mod.
GC-FID POVM 3M 3520 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Ethyl Acetate 141-78-6 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
6 hrs $55.00 10 Day Air Each
Ethyl Acetate 141-78-6 NIOSH 1457
GC-FID SKC 226-01 0.01 - 0.2 0.1 - 10.0 $55.00 10 Day Air Each
Ethyl Acrylate 140-88-5 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Ethyl Acrylate 140-88-5 OSHA 92 GC-FID SKC 226-73 0.05 12 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
38
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Ethyl Acrylate 140-88-5 OSHA 92 GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Ethyl Amyl Ketone (3-Octanone)
106-68-3 NIOSH 1500 Mod
GC-FID SKC 226-01 0.2 25 $55.00 10 Day Air Each
Ethyl Bromide (Bromoethane)
74-96-4 OSHA PV2061
GC-FID SKC 226-01 0.1 12 $100.00 10 Day Air Each
Ethyl Bromide (Bromoethane)
74-96-4 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $100.00 10 Day Air Each
Ethyl Bromide (Bromoethane)
74-96-4 NIOSH 1011 GC-FID SKC 226-01 0.01 - 0.2 0.5 - 4 $100.00 10 Day Air Each
Ethyl Butyl Ketone 106-35-4 NIOSH 1301 GC-FID SKC 226-01 0.01 - 0.2 1 - 25 $55.00 10 Day Air Each
Ethyl Butyl Ketone 106-35-4 NIOSH 1500 Mod
GC-FID SKC 226-01 0.02 - 0.05 10 $55.00 10 Day Air Each
Ethyl Butyl Ketone 106-35-4 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Ethyl Cellosolve (2-Ethoxyethanol)
110-80-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
39
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Ethyl Cellosolve (2-Ethoxyethanol)
110-80-5 NIOSH 1403
GC-FID SKC 226-01 0.01 - 0.05 1 - 6 $55.00 10 Day Air Each
Ethyl Cellosolve (2-Ethoxyethanol)
110-80-5 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Ethyl Chloride (Chloroethane)
75-00-3 NIOSH 2519
GC-FID (2) SKC-226-25
0.02 - 0.05 0.3 - 3 $100.00 10 Day Air Per Set
Ethyl Methacrylate 97-63-2 NIOSH 2537
GC-FID SKC 226-30-06
0.01 - 0.05 1 - 8 $55.00 10 Day Air Each
Ethylbenzene 100-41-4 OSHA 1002 GC-FID POVM SKC 575-002
240 min 50 $55.00 10 Day Air Each
Ethylbenzene 100-41-4 NIOSH 1500 Mod
GC-FID POVM 3M 3500, SKC575-001,002
4 hours $55.00 10 Day Air Each
Ethylbenzene 100-41-4 NIOSH 1501 GC-FID SKC 226-01 0.01 - 0.2 1 - 24 $55.00 10 Day Air Each
Ethylene Chlorohydrin (2-Chloroethanol)
107-07-3 NIOSH 2513Mod
GC-FID SKC 226-81A 0.01 - 0.2 2 - 35 $55.00 10 Day Air Each
Ethylene Chlorohydrin (2-Chloroethanol)
107-07-3 NIOSH 1500 Mod
GC-FID POVM 3M 3500
15 min (STEL), 8 hrs (TWA)
$55.00 10 Day Air Each
Ethylene Dichloride (1, 2 Dichloroethane)
107-06-2 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 1 - 50 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
40
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Ethylene Dichloride (1, 2 Dichloroethane)
107-06-2 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
Ethylene Glycol 107-21-1 NIOSH 5523
GC-FID GFF & SKC 226-57
0.5 - 2 5 - 60 $70.00 10 Day Air Each
Ethylene Glycol Monobutyl Ether (Butyl Cellosolve, 2-butoxyethanol)
111-76-2 NIOSH 1403
GC-FID SKC 226-01 0.01 - 0.05 2 - 10 $55.00 10 Day Air Each
Fluoranthene 206-44-0 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Fluorene 86-73-7 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Formaldehyde 50-00-0 NIOSH 2016
HPLC POVM SKC UMEX 100
15 min - 24 hrs $100.00 10 Day Air Each
Formaldehyde 50-00-0 NIOSH 2016
HPLC SKC 226-119 0.3 - 1.5 1 - 15 $100.00 10 Day Air Each
Furfural 98-01-1 NIOSH 2529
GC-FID SKC 226-118 0.01 - 0.05 12 $55.00 10 Day Air Each
Furfural 98-01-1 OSHA 72 Mod
GC-FID POVM 3M 3500
8 hrs $55.00 10 Day Air Each
Furfuryl Alcohol 98-00-0 NIOSH 2505
GC-FID SKC 226-115 0.01 - 0.05 3 - 25 $70.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
41
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Furfuryl Alcohol 98-00-0 NIOSH 1500 Mod
GC-FID POVM 3M 3500
8 hrs $70.00 10 Day Air Each
Gasoline NIOSH 1500 mod.
GC-FID SKC 226-01 0.01 - 0.2 2.0 - 4.0 $70.00 10 Day Air Each
Gasoline NIOSH 1500 mod.
GC-FID POVM 3M 3500
8 hrs $70.00 10 Day Air Each
Glutaraldehyde 111-30-6 OSHA 64 HPLC-UV SKC 225-9003
0.05 - 0.5 1 - 30 $100.00 10 Day Air Each
Heptane 142-82-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Heptyl Alcohol (1-Heptanol)
111-70-6 NIOSH 1402 mod.
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Hexachloroethane 67-72-1 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 3 - 70 $55.00 10 Day Air Each
Hexachloroethane 67-72-1 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
Hexone (MIBK--Methyl-isobutylketone)
108-10-1 NIOSH 1300
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Hexone (MIBK--Methyl-isobutylketone)
108-10-1 OSHA 1004 GC-FID POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
42
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Hexone (MIBK--Methyl-isobutylketone)
108-10-1 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Hydrocarbons - Aromatic
NIOSH 1501 Personnel Sampler
GC-FID SKC-226-01 See method See method $70.00 10 Day Air Each
Hydrocarbons, Total (Hydrocarbons, BP 36-216 Degrees C)
NIOSH 1500 mod.
GC-FID SKC 226-01 0.2 5 - 20 $70.00 10 Day Air Each
Indeno (1,2,3cd) pyrene 193-39-5 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Isoamyl Acetate 123-92-2 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Isoamyl Acetate 123-92-2 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Isoamyl Alcohol 123-51-3 NIOSH 1402
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Isoamyl Alcohol 123-51-3 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
43
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Isobutyl Acetate 110-19-0 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Isobutyl Acetate 110-19-0 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Isobutyl Alcohol 78-83-1 NIOSH 1401 GC-FID SKC 226-01 0.01 - 0.2 2 - 10 $55.00 10 Day Air Each
Isobutyl Alcohol 78-83-1 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Isooctane (2,2,4-Trimethylpen-tane)
540-84-1 NIOSH 1500 mod.
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Isooctane (2,2,4-Trimethylpen-tane)
540-84-1 NIOSH 1500 mod.
GC-FID POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
Isophorone 78-59-1 NIOSH 2508 Mod
GC-FID SKC 226-81A 0.01 - 1.0 25 $55.00 10 Day Air Each
Isophorone 78-59-1 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Isophrone Di-Isocyanate (IPDI)
4098-71-9 OSHA PV2034
HPLC SKC 225-9002
1 60 $100.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
44
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Isophrone Di-Isocyanate (IPDI)
4098-71-9 OSHA 42 mod.
HPLC SKC 225-9002
1 15 - 30 $100.00 10 Day Air Each
Isopropyl Acetate 108-21-4 NIOSH 1454
GC-FID SKC 226-01 0.02 - 0.2 0.1 - 9 $55.00 10 Day Air Each
Isopropyl Acetate 108-21-4 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
7 hrs $55.00 10 Day Air Each
Isopropyl Alcohol (2-Propanol)
67-63-0 NIOSH 1400
GC-FID SKC 226-01 0.01 - 0.2 0.3 - 3 $55.00 10 Day Air Each
Isopropyl Alcohol (2-Propanol)
67-63-0 OSHA 5001 GC-FID SKC 226-82 (Two Tubes in
Series)
0.05 12 $100.00 10 Day Air Per Set
Isopropyl Alcohol (2-Propanol)
67-63-0 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Isovaleraldehyde 590-86-3 NIOSH 2539 mod.
HPLC SKC 226-118 0.01 - 0.05 5 $100.00 10 Day Air Each
Kerosene (Diesel Fuel) 8008-20-6 NIOSH 1550
GC-FID SKC 226-01 0.01 - 0.20 1.3 - 20 $70.00 10 Day Air Each
Limonene 138-86-3 NIOSH 1552 GC-FID SKC 226-01 0.01 - 0.2 2 - 30 $55.00 10 Day Air Each
Limonene 138-86-3 OSHA PV2036
GC-FID SKC 226-01 0.2 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
45
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
MDI Methylene bisphenyl isocyanate
101-68-8 OSHA 47 HPLC-UV SKC 225-9002
1 15 $100.00 10 Day Air Each
Mesityl Oxide 141-79-7 NIOSH 1301 GC-FID SKC 226-01 0.01 - 0.2 1 - 25 $55.00 10 Day Air Each
Mesityl Oxide 141-79-7 NIOSH 1500 Mod
GC-FID SKC 226-01 0.02 - 0.05 10 $55.00 10 Day Air Each
Mesityl Oxide 141-79-7 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM
SKC
8 hrs $55.00 10 Day Air Each
Methanol (Methyl Alcohol)
67-56-1 OSHA 5001 GC-FID SKC 226-82 (Two Tubes in
Series)
0.05 3-5 based on relative humidity
$100.00 10 Day Air Per Set
Methanol (Methyl Alcohol)
67-56-1 NIOSH 2000
GC-FID SKC 226-51 0.02 - 0.2 1 - 5 $55.00 10 Day Air Each
Methyl Acetate 79-20-9 NIOSH 1458
GC-FID SKC 226-01 0.01 - 0.20 0.2 - 10 $55.00 10 Day Air Each
Methyl Acetate 79-20-9 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-002
2 hrs $55.00 10 Day Air Each
Methyl Acrylate 96-33-3 NIOSH 1459
GC-FID SKC 226-01 0.01 - 0.20 1.0 - 5.0 $55.00 10 Day Air Each
Methyl Acrylate 96-33-3 OSHA 92 GC-FID SKC 226-73 0.05 12 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
46
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Methyl Acrylate 96-33-3 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Methyl Cellosolve (2-Methoxyethanol)
109-86-4 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Methyl Cellosolve Acetate (2-Methoxyethyl Acetate)
110-49-6 NIOSH 1451 GC-FID SKC 226-01 0.01 - 0.20 0.20 - 20 $55.00 10 Day Air Each
Methyl Cellosolve Acetate (2-Methoxyethyl Acetate)
110-49-6 OSHA 53 GC-FID SKC 226-01 0.1 10 $55.00 10 Day Air Each
Methyl Ethyl Ketone (MEK) (2-Butanone)
78-93-3 NIOSH 2500
GC-FID SKC 226-81A 0.01 - .20 0.25 - 12 $55.00 10 Day Air Each
Methyl Isoamyl Acetate 108-84-9 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Methyl Isoamyl Ketone (5-methyl-2-hexanone)
110-12-3 NIOSH 1500 Mod
GC-FID SKC 226-01 0.05 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
47
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Methyl Isoamyl Ketone (5-methyl-2-hexanone)
110-12-3 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Methyl Isobutyl Carbinol (Methyl Amyl Alcohol)
108-11-2 NIOSH 1402
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Methyl Isobutyl Carbinol (Methyl Amyl Alcohol)
108-11-2 NIOSH 1402 mod.
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Methyl Isobutyl Ketone (4-Methyl 2 Pentanone, MIBK, hexone isopropyl acetone)
108-10-1 NIOSH 1300
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Methyl Isobutyl Ketone (4-Methyl 2 Pentanone, MIBK, hexone isopropyl acetone)
108-10-1 OSHA 1004 GC-FID POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Methyl Isobutyl Ketone (4-Methyl 2 Pentanone, MIBK, hexone isopropyl acetone)
108-10-1 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Methyl Methacrylate 80-62-6 NIOSH 2537
GC-FID SKC 226-30-06
0.01 - 0.05 1 - 8 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
48
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Methyl Methacrylate 80-62-6 OSHA 94 GC-FID SKC 226-73 0.01 - 0.05 10 $55.00 10 Day Air Each
Methyl Methacrylate 80-62-6 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Methyl n-Amyl ketone (2 - Heptanone)
110-43-0 NIOSH 1301 GC-FID SKC 226-01 0.01 - 0.2 1 - 25 $55.00 10 Day Air Each
Methyl n-Amyl ketone (2 - Heptanone)
110-43-0 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Methyl n-Butyl Ketone (MBK, 2-Hexanone)
591-78-6 NIOSH 1300
GC-FID SKC 226-01 0.02 - 0.2 1 - 10 $55.00 10 Day Air Each
Methyl n-Butyl Ketone (MBK, 2-Hexanone)
591-78-6 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Methyl Propyl Ketone (2-Pentanone)
107-87-9 NIOSH 1300 mod.
GC-FID POVM 3M 3500 SKC 575-
001 or 002
8 hrs $55.00 10 Day Air Each
Methyl Propyl Ketone (2-Pentanone)
107-87-9 NIOSH 1300
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
Methyl Propyl Ketone (2-Pentanone)
107-87-9 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
49
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Methyl tert-Amyl Ether 994-05-8 NIOSH 1615 mod.
GC-FID SKC 226-01 0.05 - 0.2 5 - 10 $55.00 10 Day Air Each
Methyl tert-Butyl Ether (MTBE)
1634-04-4 NIOSH 1615 GC-FID SKC 226-37 (Two Tubes in
Series)
0.1 - 0.2 2 - 96 $100.00 10 Day Air Per Set
Methylcyclohexane 108-87-2 NIOSH 1500
GC-FID SKC 226-01 0.01 - 0.2 4 $55.00 10 Day Air Each
Methylcyclohexane 108-87-2 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
Methylene Chloride (Dichloromethane)
75-09-2 NIOSH 1005
GC-FID (2) SKC 226-01 (Two Tubes in
Series)
0.01 - 0.2 0.5 - 2.5 $100.00 10 Day Air Per Set
Methylene Chloride (Dichloromethane)
75-09-2 OSHA 80 GC-FID ORBO 91 0.05 3 $70.00 10 Day Air Each
Methylene Chloride (Dichloromethane)
75-09-2 NIOSH 1005 mod.
GC-FID SKC 575-001 8 hrs $70.00 10 Day Air Each
n-Amyl Acetate 628-63-7 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.20 1 - 10 $55.00 10 Day Air Each
n-Amyl Acetate 628-63-7 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
50
Industrial HygieneIndustrial HygieneOrganics (cont.)
Analyte CAS # Method Technique Sampling Media
Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Naphtha (Coal Tar/Petroleum)
NIOSH 1550
GC-FID SKC 226-01 Send reference
material in separate shipment
0.01 - 0.2 1.3 - 20 $70.00 10 Day Air Each
Naphthalene 91-20-3 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Naphthalene 91-20-3 OSHA 35 GC-FID SKC 226-110 0.2 10 $55.00 10 Day Air Each
Naphthalene 91-20-3 NIOSH 1500 Mod
GC-FID POVM 3M 3500
8 hrs $55.00 10 Day Air Each
Naphthalene 91-20-3 NIOSH 1501 mod.
GC-FID SKC 226-01 0.01 100 - 200 $55.00 10 Day Air Each
n-Butyl Acetate 123-86-4 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
n-Butyl Acetate 123-86-4 OSHA 1009 GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
n-Butyl Alcohol (1-Butanol)
71-36-3 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
n-Butyl Alcohol (1-Butanol)
71-36-3 NIOSH 1401 GC-FID SKC 226-01 0.01 - 0.2 2 - 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
51
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
n-Butyl Glycidyl Ether 192337 NIOSH 1616 GC-FID SKC 226-01 0.01 - 0.2 15 - 30 $55.00 10 Day Air Each
n-Butyl Glycidyl Ether 192337 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
n-Butyl Methacrylate 97-88-1 NIOSH 2537 mod.
GC-FID SKC 226-30-06
0.01 - 0.5 1 - 8 $55.00 10 Day Air Each
n-Decane 124-18-5 NIOSH 1500
GC-FID SKC 226-01 0.01- 0.2 5 $55.00 10 Day Air Each
n-Decane 124-18-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
n-Heptane 142-82-5 NIOSH 1500
GC-FID SKC 226-01 0.01-0.2 4 $55.00 10 Day Air Each
n-Hexane 110-54-3 NIOSH 1500
GC-FID SKC 226-01 0.01 - 0.2 4 $55.00 10 Day Air Each
n-Hexane 110-54-3 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Nicotine 54-11-5 NIOSH 2551 GC-NPD SKC 226-93 0.1 - 1.0 0.5 -6 00 $70.00 10 Day Air Each
Nitrobenzene 98-95-3 NIOSH 2005
GC-FID SKC 226-10 0.01 - 1.0 10 - 150 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
52
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Nitromethane 75-52-5 NIOSH 2527 Mod
GC-NPD SKC 226-111A 0.01 - 0.05 1.2 - 3 $70.00 10 Day Air Each
NMP (n-Methy-2-Pyrrolidone)
872-50-4 NIOSH 1302
GC-FID SKC 226-01 0.05 - 0.2 0.5 - 125 $55.00 10 Day Air Each
n-Octane 111-65-9 NIOSH 1500
GC-FID SKC 226-01 0.01 - 0.2 4 $55.00 10 Day Air Each
n-Octane 111-65-9 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
n-Pentane 109-66-0 NIOSH 1500
GC-FID SKC 226-01 0.01 - 0.2 4 $55.00 10 Day Air Each
n-Pentane 109-66-0 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-001
3 hrs $55.00 10 Day Air Each
n-Propyl Acetate 109-60-4 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
n-Propyl Acetate 109-60-4 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
n-Propyl Alcohol 71-23-8 NIOSH 1401 GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
53
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
n-Propyl Alcohol 71-23-8 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
6 hrs $55.00 10 Day Air Each
n-Vinyl 2-Pyrrolidone 88-12-0 NIOSH 1302
GC-FID SKC 226-01 0.05 - 0.2 12 $55.00 10 Day Air Each
Oil Mist (Metalworking Fluids (MWF) All Categories)
8012-95-1 NIOSH 5026
FTIR MCE, PCV or GFF
Send reference material in separate
shipment. Oil must be solvent
soluble.
1 - 3 20 - 500 $90.00 10 Day Air Each
ortho-Dichlorobenzene (1,2-Dichlorobenzene)
95-50-1 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
ortho-Dichlorobenzene (1,2-Dichlorobenzene)
95-50-1 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
ortho-Dichlorobenzene (1,2-Dichlorobenzene)
95-50-1 NIOSH 1501 GC-FID SKC 226-01 0.2 2 - 30 $55.00 10 Day Air Each
para-Dichlorobenzene (1,4-Dichlorobenzene)
106-46-7 NIOSH 1501 GC-FID SKC 226-01 0.2 2 - 30 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
54
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
para-Dichlorobenzene (1,4-Dichlorobenzene)
106-46-7 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
para-Dichlorobenzene (1,4-Dichlorobenzene)
106-46-7 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 1 - 8 $55.00 10 Day Air Each
Paraffin Wax Fume 8002-74-2 OSHA CSI GC-FID GFF 1 200 - 600 $70.00 10 Day Air Each
Perchloroethylene (Tetrachloroethylene)
127-18-4 NIOSH 1003
GC-FID SKC 226-01 0.01 - 0.2 1 - 40 $55.00 10 Day Air Each
Perchloroethylene (Tetrachloroethylene)
127-18-4 OSHA 1001 GC-FID POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Perchloroethylene (Tetrachloroethylene)
127-18-4 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Petroleum Distillate NIOSH 1550
GC-FID SKC 226-01 0.01 - 0.20 1.3 - 20 $70.00 10 Day Air Each
Petroleum Ether (VM&P Naphtha, Ligroin)
8032-32-4 NIOSH 1550
GC-FID SKC 226-01 0.01 - 0.20 1.3 - 20 $70.00 10 Day Air Each
Petroleum Naphtha 8002-05-09 NIOSH 1550
GC-FID SKC 226-01 0.01 - 0.20 1.3 - 20 $70.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
55
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Phenanthrene 85-01-8 NIOSH 5506
HPLC-UV/FL PTFE & SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Phenol 108-95-2 OSHA 32 HPLC 226-95 0.1 24 $100.00 10 Day Air Each
Phenyl Ether 101-84-8 NIOSH 1617 GC-FID SKC 226-01 0.01 - 0.2 1 - 50 $55.00 10 Day Air Each
Phenyl Ether 101-84-8 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
Phenylethylene (Styrene)
100-42-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Phenylethylene (Styrene)
100-42-5 NIOSH 1501 GC-FID SKC 226-01 0.05 - 1.0 1 - 14 $55.00 10 Day Air Each
Propylene Glycol 57-55-6 NIOSH 5523
GC-FID GFF & SKC 226-57
0.5 - 2.0 5 - 60 $70.00 10 Day Air Each
Propylene Glycol Methyl Ether (PGME) (Propylene Glycol Monomethyl Ethers/Acetates)
107-98-2, 1589-47-5
OSHA 99 GC-FID SKC 226-01 0.1 5 - 10 $55.00 10 Day Air Each
Propylene Oxide 75-56-9 NIOSH 1612 GC-FID SKC 226-01 0.01 - 0.2 0.5 - 5 $100.00 10 Day Air Each
Propylene Oxide 75-56-9 OSHA 88 GC-FID SKC 226-81A 0.1 5 $100.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
56
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Propylene Oxide 75-56-9 NIOSH 1500 Mod
GC-FID POVM 3M 3520 POVM SKC 575-001
or 002
8 hrs $100.00 10 Day Air Each
Pseudocumene (1, 2, 4 - Trimethylbenzene)
95-63-6 NIOSH 1501 GC-FID SKC 226-01 0.01 - 0.2 30 $55.00 10 Day Air Each
p-tert-Butyl Toluene 98-51-1 NIOSH 1501 GC-FID SKC 226-01 0.01 - 0.2 1 - 29 $55.00 10 Day Air Each
Pyrene 129-00-0 NIOSH 5506
HPLC-UV/FL PTFE + SKC 226-30-04
2 200 - 1000 $100.00 10 Day Air Each
Pyridine 110-86-1 NIOSH 1613 GC-FID SKC 226-01 0.01 - 1.0 18 - 150 $55.00 10 Day Air Each
Refrigerant 113 (1,1,2-Trichloro-2,2,1-trifluoroethane)
76-13-1 NIOSH 1020
GC-FID SKC 226-01 0.01 - 0.05 0.1 - 3 $70.00 10 Day Air Each
Rubber Solvent 8030-30-6 NIOSH 1550
GC-FID SKC 226-01 0.01 - 0.20 1.3 - 20 $70.00 10 Day Air Each
sec-Amyl Acetate 626-38-0 NIOSH 1450
GC-FID SKC 226-01 or POVM SKC
575-001
0.01 - 0.20 1 - 10 $55.00 10 Day Air Each
sec-Amyl Acetate 626-38-0 NIOSH 1500 Mod
GC-FID POVM SKC 575-001
8 hrs $55.00 10 Day Air Each
sec-Butyl Acetate 105-46-4 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
57
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
sec-Butyl Acetate 105-46-4 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
sec-Butyl Alcohol (2-Butanol)
78-92-2 NIOSH 1401 GC-FID SKC 226-01 0.01 - 0.2 2 - 10 $55.00 10 Day Air Each
sec-Butyl Alcohol (2-Butanol)
78-92-2 NIOSH 1401 GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Silica, Quartz (Respirable Coal Mine Dust)
NIOSH 7603 (P7)
FTIR/Grav. PVC-MSHA 2 480 - 960 $96.00 10 Day Air Each
Stoddard Solvent (Mineral Spirits)
8052-41-3 NIOSH 1550
GC-FID SKC 226-01 0.01 - 0.20 1.3 - 20 $70.00 10 Day Air Each
Styrene 100-42-5 NIOSH 1501 GC-FID SKC 226-01 0.01- 1 1 - 14 $55.00 10 Day Air Each
Styrene 100-42-5 NIOSH 1501 mod.
GC-FID POVM 3M 3500, SKC
575-002 or 575-006
8 hrs $55.00 10 Day Air Each
t-Butyl Glycidyl Ether 7665-72-7 OSHA CSI GC-FID SKC 226-01 0.2 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
58
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
TDI as mixture (2,4-Toluene Diisocyanate and/or 2,6-Toluene Diisocyanate)
584-84-9, 91-08-7
OSHA 42 HPLC-UV SKC 225-9002
1 15 $100.00 10 Day Air Each
tert-Butyl Acetate 540-88-5 NIOSH 1450
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
tert-Butyl Acetate 540-88-5 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
tert-Butyl Alcohol (2-methyl-2-propanol)
75-65-0 NIOSH 1400
GC-FID SKC 226-01 0.01 - 0.2 1 - 10 $55.00 10 Day Air Each
tert-Butyl Alcohol (2-methyl-2-propanol)
75-65-0 NIOSH 1400 mod.
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Tetrahydrofuran 109-99-9 NIOSH 1609
GC-FID SKC 226-01 0.01 - 0.20 1.0 - 9.0 $55.00 10 Day Air Each
Tetrahydrofuran 109-99-9 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-002
8 hrs $55.00 10 Day Air Each
Toluene 108-88-3 OSHA 111 GC-FID POVM SKC 575-002
12L/240 min $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
59
Industrial HygieneIndustrial HygieneOrganics (cont.)Analyte CAS # Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Toluene 108-88-3 OSHA 1005 GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Toluene 108-88-3 NIOSH 1501 GC-FID SKC 226-01 0.01 - 0.2 1 - 8 $55.00 10 Day Air Each
Total Hydrocarbons NIOSH 1500 mod.
GC-FID SKC 226-01 0.2 4 $70.00 10 Day Air Each
Tri(ethylene) Glycol 112-27-6 NIOSH 5523
GC-FID GFF & SKC 226-57
0.5 - 1.0 5 - 60 $70.00 10 Day Air Each
Trichloroethylene 79-01-6 NIOSH 1022
GC-FID SKC 226-01 0.01 - 0.2 1 - 30 $55.00 10 Day Air Each
Trichloroethylene 79-01-6 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $55.00 10 Day Air Each
Turpentine 8006-64-2 NIOSH 1550
GC-FID SKC 226-01 0.01 - 0.20 1.0 - 10 $70.00 10 Day Air Each
Vinyl Acetate 108-05-4 OSHA 51 mod.
GC-FID POVM 3M 3500 POVM SKC 575-002
24 $70.00 10 Day Air Each
Vinyl Bromide (Bromoethene)
593-60-2 NIOSH 1009
GC-FID SKC 226-09 0.01 - 0.20 2 - 10 $55.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
60
Industrial HygieneIndustrial HygieneOrganics (cont.)
Analyte CAS # Method Technique Sampling Media
Sampling Rate
Suggested Volume
Price TAT Matrix Unit
Vinyl Bromide (Bromoethene)
593-60-2 OSHA 08 GC-FID SKC 226-01 0.02 5 $55.00 10 Day Air Each
Vinyl Chloride (Chloroethylene)
75-01-4 OSHA 75 GC-FID ORBO 91 0.05 3 $70.00 10 Day Air Each
Vinyl Chloride (Chloroethylene)
75-01-4 NIOSH 1007
GC-FID (2) SKC 226-01
Ship sample refrigerated
overnight delivery
0.05 0.7 - 5.0 $70.00 10 Day Air Each
Xylene, Total (all isomers)
1330-20-7 NIOSH 1501 GC-FID SKC 226-01 0.02 - 0.2 2 - 23 $70.00 10 Day Air Each
Xylene, Total (all isomers)
1330-20-7 NIOSH 1501 mod.
GC-FID POVM SKC 575-002
0.05 12L/240 min $70.00 10 Day Air Each
Xylene, Total (all isomers)
1330-20-7 NIOSH 1500 Mod
GC-FID POVM 3M 3500 POVM SKC 575-001
or 002
8 hrs $70.00 10 Day Air Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
61
Industrial Hygiene ProfilesIndustrial Hygiene ProfilesTest Analyte Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Aldehyde Profile
Acetaldehyde, Acrolein, Butyraldehyde, Crotonaldehyde, Formaldehyde, Furfural, Glutaraldehyde, Heptanal, Hexanal, Isobutyaldehyde, Isovaleraldehyde, Propionaldehyde
NIOSH 2016 Mod. / TO-11A HPLC
SKC 226-119 .1-1.5 15 $400.00 10 Day Air Group
BTEX ProfileBenzene, Ethyl Benzene, Toluene and Xylene, Total Hydrocarbon (VOC as Hexane)
NIOSH 1501 GC-FID
SKC 226-01 or 3M 3500
POVM or SKC 575-
001 or 002
0.1 - 0.5 10 $150.00 10 Day Air Group
Diisocyanate Profile HDI, MDI, 2,4-TDI, 2,6,-TDI OSHA 42 & 47 HPLC-UV/FL Trtd. GFF 0.2 - 1.0 15 - 30 $250.00 10 Day Air Group
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
62
Industrial Hygiene ProfilesIndustrial Hygiene ProfilesTest Analyte Method Technique Sampling
MediaSampling
RateSuggested
VolumePrice TAT Matrix Unit
Inorganic Acid Profile
Hydrobromic Acid, Hydrochloric Acid, Hydofluoric Acid, Nitric Acid, Phosphoric Acid, Sulfuric Acid
NIOSH 7903 IC SKC 226-10-03
0.2 - 0.4 100 $225.00 5 Day Air Group
MSHA Welding Fume Profile (14 metals)
Arsenic, Beryllium, Cadmium, Chromium, Cobalt, Copper, Iron, Lead, Magnesium, Manganese, Molybdenum, Nickel, Vanadium, Zinc
NIOSH 7300 / OSHA ID 125
ICP-AES/ICP-MS
MCE or PVC 1.0 - 2.0 200 - 1000 $230.00 5 Day Air Group
OSHA 58 Benzene Soluble Fraction by HPLC (5 PAH’s Profile)
Anthracene, Benzo(a)pyrene, Chrysene, Phenanathrene, Pyrene
NIOSH 5506 HPLC-UV/FL
PTFE Benzene, Soluble Fraction
2 200 - 960 $250.00 10 Day Air Group
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
63
Industrial Hygiene ProfilesIndustrial Hygiene Profiles
Test Analyte Method TechniqueSampling
MediaSampling
RateSuggested
Volume Price TAT Matrix Unit
Polynuclear Aromatic Hydrocarbons Profile (PAH’s also known as PNA’s)
Acenaphthene, Acenapththylene, Anthracene, Benz(a)anthracene, Benzo(b)fluoranthene, Benzo(k)fluoranthene, Benzo(ghi)perylene, Benzo(a)pyrene, Benzo(e)pyrene, Chrysene, Dibenz(a,h)anthracene, Fluoranthene, Fluorene, Indeno(1,2,3-cd)pyrene, Naphthalene, Phenanthrene, Pyrene
NIOSH 5506 HPLC-UV/FL
PTFE + SKC 226-30-04 Transfer fil-ters to glass vials after sampling; wrap to protect from light. Ship
sample re-frigerated overnight delivery.
2.0 200 - 1000 $400.00 10 Day Air Group
Welding Fume Profile (15 metals)
Aluminum, Antimony, Beryllium, Cadmium, Chromium, Cobalt, Copper, Iron, Lead, Manganese, Molybdenum, Nickel, Titanium, Vanadium, Zinc
NIOSH 7300 / OSHA ID 125
ICP-AES/ICP-MS
MCE or PVC 1.0 - 2.0 200 - 1000 $240.00 5 Day Air Group
Welding Fume Profile+As (16 metals)
Arsenic, Aluminum, Antimony, Beryllium, Cadmium, Chromium, Cobalt, Copper, Iron, Lead, Manganese, Molybdenum, Nickel, Titanium, Vanadium, Zinc
NIOSH 7300 / OSHA ID 125
ICP-AES/ICP-MS
MCE or PVC 1.0 - 2.0 200 - 1000 $255.00 5 Day Air Group
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
64
Environmental & Wet ChemistryEnvironmental & Wet ChemistryInorganicsNon-potable & Drinking Water
Test Analyte Method Technique Price TAT Matrix Unit
Drinking Water - Asbestos Asbestos EPA 100.2 TEM $190.00 5 Day Water Each
Drinking Water - Determination of Inorganic Anions
Chloride, Fluoride, Nitrate, Nitrite, Orthophosphate, Sulfate
EPA 300.0 IC $55.00 5 Day Water Each
Drinking Water - Determination of Inorganic Anions
Chloride, Fluoride, Nitrate, Orthophosphate, Sulfate
EPA 300.0 IC $225.00 5 Day Water Group
Drinking Water - Determination of Trace Elements and Metals
Al, Ba, B, Ca, Cr, Cu, Fe, Mg, Mn, Mo, Ni, K, Ag, Na, V, Zn
EPA 200.7 ICP-AES $22.00 5 Day Water Each
Drinking Water - Determination of Trace Elements and Metals
Al, Sb, As, Ba, Be, B, Cd, Cr,Cu, Pb, Mn, Hg, Mo, Ni, Se Ag, Tl, V, Zn
EPA 200.8 ICP-MS $22.00 5 Day Water Each
Drinking Water - Lead (Pb) and Copper (Cu)
Lead (Pb) and Copper (Cu) EPA 200.8/EPA 200.7 ICP-MS/ICP-AES
$50.00 5 Day Water Each
Drinking Water - Mercury Hg EPA 245.1 CVAA $55.00 5 Day Water Each
Non-potable Water - Asbestos Asbestos EPA 100.1 TEM $230.00 5 Day Water Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
65
Environmental & Wet ChemistryEnvironmental & Wet ChemistryInorganicsNon-potable & Drinking Water (cont.)
Test Analyte Method Technique Price TAT Matrix Unit
Non-potable water - Chromium (VI)
Chromium, Hexavalent (CrVI) EPA 3060A/EPA 7199 IC $63.00 5 Day Water Each
Non-potable water - Determination of Inorganic Anions
Bromide, Chloride, Fluoride, Nitrate, Orthophosphate, Sulfate
EPA 300.0/EPA 9056A
IC $225.00 5 Day Water Group
Non-potable water - Determination of Inorganic Anions
Bromide, Chloride, Fluoride, Nitrate, Nitrite, Orthophosphate, Sulfate
EPA 300.0/EPA 9056A
IC $55.00 5 Day Water Each
Non-potable water - Determination of Trace Elements and Metals
Al, Sb, As, Ba, Be, B, Cd, Ca, Cr, Co, Cu, Fe, Pb, Li, Mg, Mn, Mo, Ni, K, Se, Ag, Na, Sr, Tl, Sn, Ti, V, Zn
EPA 200.7/EPA 6010C ICP-AES $22.00 5 Day Water Each
Non-potable water - Determination of Trace Elements and Metals
Al, Sb, As, Ba, Be, B, Cd, Cr, Co, Cu, Fe, Pb, Li, Mn, Hg, Mo, Ni, Se, Ag, Sr, Tl, Sn, Ti, V, Zn
EPA 200.8/EPA 6020 ICP-MS $22.00 5 Day Water Each
Non-potable water - Mercury Hg EPA 245.1 / 7470A CVAA $55.00 5 Day Water Each
Non-potable water or Drinking Water - Conductivity
Conductivity SM 2510B Conductivity Meter
$25.00 5 Day Water Each
Non-potable water or Drinking Water - Hardness (calc.)
Hardness (calc) (Ca, Mg by ICP-AES)
EPA 200.7/SM2340B 6010C
ICP-AES $22.00 5 Day Water Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
66
Environmental & Wet ChemistryEnvironmental & Wet ChemistryInorganics
Test Analyte Method Technique Price TAT Matrix Unit
Non-Potable Water or Drinking Water - Lead (Pb)
Lead (Pb) EPA 6020/200.8 ICP-MS $35.00 5 Day Water Each
Non-potable water or Drinking Water - pH (Corrosivity)
pH SM 4500-H+B Electrode $25.00 5 Day Water Each
Non-potable water or Drinking Water - Residue, Filterable (TDS)
Residue, Filterable (TDS) SM 2540C Gravimetric $50.00 5 Day Water Each
Non-potable water or Drinking Water - Residue, Non-Filterable (TSS)
Residue, Non-Filterable (TSS) SM 2540D Gravimetric $50.00 5 Day Water Each
Non-potable water or Drinking Water - Residue, Total (TS)
Residue, Total (TS) SM 2540B Gravimetric $50.00 5 Day Water Each
Non-potable water or Drinking Water- Turbidity
Turbidity SM 2130B Turbidimeter $25.00 5 Day Water Each
Non-potable & Drinking Water (cont.)
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
67
Test Analyte Method Technique Price TAT Matrix Unit
Solids & Hazardous Waste - Bulk Asbestos Analysis
Asbestos EPA 600/R-93/116 PLM $15.75 5 Day Solid/Bulk
(building
Layer
Solids & Hazardous Waste - Bulk Asbestos Analysis
Asbestos EPA 600/R-93/116 PLM $52.50 10 Day Solid/Bulk (Soil/Rock/Raw
Each
Solids & Hazardous Waste - Chemical/Elemental Composition, Quantitative (w/construction of calibration curve)
Quantification of calibrated elements In-house XRF call for pricing
10 Day (after construction of
curve)
Solid/Bulk
Each
Solids & Hazardous Waste - Chemical/Elemental Composition, Semi-Quant
Scan-Quantification of major elements Semi-Quant XRF $165.00 10 Day Solid/Bulk
Each
Solids & Hazardous Waste - Chromium (VI)
Chromium, Hexavalent (CrVI) EPA 3060/EPA 7199 IC $68.00 5 Day Solid/Bulk
Each
Solids & Hazardous Waste - Determination of Inorganic Anions
Bromide, Chloride, Fluoride, Nitrate, Nitrite, Orthophosphate, Sulfate
EPA 9056A IC $225.00 5 Day Solid/Bulk
Group
Environmental & Wet ChemistryEnvironmental & Wet ChemistryInorganics
Solid & Hazardous Waste
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
68
Test Analyte Method Technique Price TAT Matrix Unit
Solids & Hazardous Waste - Determination of Inorganic Anions
Bromide, Chloride, Fluoride, Nitrate, Nitrite, Orthophosphate, Sulfate
EPA 9056A IC $55.00 5 Day Solid/Bulk
Each
Solids & Hazardous Waste - Mercury
Hg EPA 7471A CVAA $55.00 5 Day Solid/Bulk
Each
Solids & Hazardous Waste - pH pH EPA 9045D Electrode $25.00 5 Day Solid/Bulk
Each
Solids & Hazardous Waste - Qualitative Phase ID
Scan - Phase ID of Major Crystalline Materials
Search & Match (using ICDD PDF 4+
Database)
XRD $225-$300
10 Day Solid/Bulk
Each
Solids & Hazardous Waste - Qualitative Phase ID and Silica, Total Crystalline (Quartz, Cristobalite, Tridymite)
Scan - Phase ID of Major Crystalline Materials and Silica, Total Crystalline (Quartz, Cristobalite, Tridymite)
NIOSH 7500 mod. Search & Match
(using ICDD PDF 4+ Database)
XRD $300-$500
10 Day Solid/Bulk
Each
Solids & Hazardous Waste - Quantitative Phase ID
Scan - Phase ID and Quantification o of Major Crystalline Materials. Total Amorphous quantification is also possible
By Rietveld Method, limitations apply,
additional analyses might be needed,
please call for more information
XRD $400-$725
10 to 20 days Solid/Bulk
Each
Solids & Hazardous Waste - Silica, Amorphous and Total Crystalline
Silica, Amorphous and Total Crystalline (Quartz, Cristobalite, Tridymite)
NIOSH 7501 & NIOSH 7500 mod.
XRD $500-$635
10 Day Solid/Bulk
Each
Environmental & Wet ChemistryEnvironmental & Wet ChemistryInorganics
Solid & Hazardous Waste (cont.)
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
69
Test Analyte Method Technique Price TAT Matrix Unit
Solids & Hazardous Waste - Silica, Amorphous Only
Silica, Amorphous Only NIOSH 7501 mod. XRD $450-$585
10 Day Solid/Bulk
Each
Solids & Hazardous Waste - Silica, Total Crystalline & Respirable (CCSEM)
Silica, Total Crystalline (Quartz, Cristobalite, Tridymite) & Respirable (Si Rich by CCSEM < 10 um)
NIOSH 7500 mod and Size Separation
XRD/ CCSEM $500-$705
10 Day Solid/Bulk
Each
Solids & Hazardous Waste - Silica, Total Crystalline & Respirable (Stokes)
Silica, Total Crystalline (Quartz, Cristobalite, Tridymite) & Respirable (Stokes Settling < 10 um)
NIOSH 7500 mod and Size Separation
XRD/Stokes Settling
$560-$705
10 Day Solid/Bulk
Each
Solids & Hazardous Waste - Silica, Total Crystalline (Quartz, Cristobalite, Tridymite)
Silica, Total Crystalline (Quartz, Cristobalite, Tridymite)
NIOSH 7500 mod. XRD $225-$405
10 Day Solid/Bulk
Each
Solids & Hazardous Waste - Trace Elements
Al, Sb, As, Ba, Be, B, Cd, Ca, Cr, Co, Cu, Fe, Pb, Li, Mg, Mn, Mo, Ni, P, K, Se, Ag, Na, Sr, Tl, Sn, Ti, V, Zn
EPA 6010C ICP-AES $22.00 5 Day Solid/Bulk
Each
Solids & Hazardous Waste - Trace Elements
As, Cd, Hg, Pb EPA 6020 ICP-MS $22.00 5 Day Solid/Bulk
Each
Dinnerware Extraction from Glazed Ceramic Surfaces
Pb, Cd ASTM C738 ICP-MS call for pricing
10 Day Solid/Bulk
Group
Dinnerware Extraction from the Lip and Rim Area of Glass Tumblers
Pb, Cd ASTM C927 ICP-MS call for pricing
10 Day Solid/Bulk
Group
Environmental & Wet ChemistryEnvironmental & Wet ChemistryInorganics
Solid & Hazardous Waste (cont.)
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
70
OrganicsEnvironmental & Wet ChemistryEnvironmental & Wet Chemistry
Test Method Technique Price Unit
Volatile Aromatics EPA 524.2 GC-MS $185.00 Group
Volatile Halocarbons EPA 524.2 GC-MS $125.00 Group
Fuel Oxygenates EPA 8260B GC-MS $125.00 Group
Polychlorinated Biphenyls EPA 608 / 8082 GC $90.00 Group
Polynuclear Aromatics EPA 625 / 8270C GC-MS $185.00 Group
Purgeable Aromatics EPA 625 / 8260B / 8270C GC-MS $95.00 Group
Purgeable Halocarbons EPA 624 / 8260B GC-MS $95.00 Group
Purgeable Organics EPA 8260B GC-MS $125.00 Group
Volatile Chlorinated Organics EPA 8260B GC-MS $125.00 Group
Non-potable & Drinking Water
Solid and Hazardous Waste
Test Method Technique Price Unit
Acrylates EPA 8260B GC-MS $125.00 Group
Chlorinated Hydrocarbons EPA 8260B / 8270C GC-MS $190.00 Group
Haloethers EPA 8270C GC-MS $225.00 Group
Polychlorinated Biphenyls EPA 8082 GC $90.00 Group
Polynuclear Aromatics EPA 8260B GC-MS $125.00 Group
Purgeable Halocarbons EPA 8260B GC-MS $125.00 Group
Purgeable Organics EPA 8260B GC-MS $125.00 Group
Volatile Chlorinated Organics EPA 8260B GC-MS $125.00 Group
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
71
Environmental & Wet ChemistryEnvironmental & Wet ChemistryOrganicsAir and Emissions
Test Method Technique Price Unit
Acrylates EPA TO-17 / TO-15 GC-MS $300.00 Group
Air Analysis TO-11 HPLC-DAD $275.00 Group
Amines Internal Method LC/MS/MS $350.00
Chlorinated Hydrocarbons EPA TO-14A / TO-15 GC / GC-MS $300.00 Group
Polychlorinated Biphenyls EPA TO-10A GC-MS $150.00 Group
Polynuclear Aromatics EPA TO-13 GC-MS $250.00 Group
Purgeable Aromatics EPA TO-14A / TO-13 GC / GC-MS $250.00 Group
Purgeable Halocarbons EPA TO-14A / TO-15 / TO-17 GC / GC-MS $300.00 Group
Volatile Chlorinated Organics EPA TO-14A / TO-15 GC / GC-MS $300.00 Group
Volatile Organics EPA TO-14A / TO-15 / TO-17 GC / GC-MS $300.00 Group
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
72
Environmental & Wet ChemistryEnvironmental & Wet ChemistrySample PreparationTest Method Technique Price Unit
Acid digestion of solids EPA 3050B Digestion $20.00 Each
Dissolved metals EPA3005A Digestion $20.00 Each
Hot plate acid digestion (HNO3 + HCI) EPA 3010A Digestion $20.00 Each
Microwave digestion - solids (HNO3 + HF) EPA 3052 Digestion $62.00 Each
Microwave digestion - solids (HNO3 only) EPA 3051 Digestion $62.00 Each
Microwave-assisted acid digestion EPA 3015 Digestion $62.00 Each
Organic Continuous Liquid-Liquid Extraction EPA 3520C $50.00 Each
Separatory Funnel Liquid-Liquid Extraction EPA 3510C $50.00 Each
Solids & Hazardous Waste - synthetic precipitation leaching procedure (SPLP)- Inorganic
EPA 1312 Extraction $50.00 Each
Solids & Hazardous Waste - Toxicity characteristic leaching procedure (TCLP) -Inorganic
EPA 1311 Extraction $50.00 Each
Solids & Hazardous Waste - Waste Extraction Test (WET) STLC
CCR Chapter 11, Article 5, Appendix II
Extraction $100.00 Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
73
Powdered Metal AnalysisPowdered Metal Analysis
Analysis Technique
Contaminant Identification of Ceramics, Non-metallics, and Metallic Aluminum Heavy Liquid Separation
Particle Size Distribution and Shape Analysis CCSEM w/optional EDS
Powder Cross-contamination Detection CCSEM/EDS
Manual SEM/EDS Analysis SEM/EDS
In Powder Metals (PM) applications such as 3D printing, the flow and packing behavior of PM is influenced by particle size and shape distributions. These properties can be measured in statistically meaningful ways using computer controlled scanning electron microscopy (CCSEM). Compositional information can also be performed with the particle-by-particle analysis using EDS. This will allow investigation of changes in powder metal composition, or the presence of extraneous particulate. The experts at RJ Lee Group can work with your team to answer questions and find solutions for your powder metal manufacturing facility.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
74
RJ Lee Group’s combination of evaluation, sampling, and assessments provides the geologic consulting expertise you need to support your industrial minerals operation.
Mining & Mineral ServicesMining & Mineral Services
» Geotechnical Analyses
» Field Support Services
» MSHA Safety & Compliance Testing
Understanding sub-surface geology mitigates risk and safety concerns when experts utilize proper sampling
techniques for minerals, such as naturally occurring asbestos, crystalline silica, and heavy metals. Our roots
in environmental and particulate studies provide the experience and support needed to safely assess active
operations and greenfield sites.
» Mineral Assessments
» Due Diligence
» Petrography
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
75
Mineral Identification & CharacterizationMineral Identification & Characterization
Test Analyte Method Price Matrix UnitQualitative Phase ID Scan - Phase ID of Major Crystalline Materials Search & Match (using
ICDD PDF 4+ Database)$225-$300 Solid/Bulk Each
Quantitative Phase ID Scan - Phase ID and Quantification o of Major Crystalline Materials. Total Amorphous quantification is also possible
By Rietveld Method, limitations apply, additional analyses might be needed,
please call for more information
$400-$725 Solid/Bulk Each
Silica, Total Crystalline (Quartz, Cristobalite, Tridymite)
Silica, Total Crystalline (Quartz, Cristobalite, Tridymite)
NIOSH 7500 mod. $225-$405 Solid/Bulk Each
Qualitative Phase ID and Silica, Total Crystalline (Quartz, Cristobalite, Tridymite)
Scan - Phase ID of Major Crystalline Materials and Silica, Total Crystalline (Quartz, Cristobalite, Tridymite)
NIOSH 7500 mod. Search & Match (using ICDD PDF 4+
Database)
$300-$500 Solid/Bulk Each
Silica, Amorphous Only Silica, Amorphous Only NIOSH 7501 mod. $450-$585 Solid/Bulk Each
Silica, Amorphous and Total Crystalline
Silica, Amorphous and Total Crystalline (Quartz, Cristobalite, Tridymite)
NIOSH 7501 & NIOSH 7500 mod.
$500-$635 Solid/Bulk Each
Silica, Total Crystalline & Respirable (Stokes)
Silica, Total Crystalline (Quartz, Cristobalite, Tridymite) & Respirable (Stokes Settling < 10 um)
NIOSH 7500 mod and Size Separation
$560-$705 Solid/Bulk Each
XRF - 10 Day TAT
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
76
XRF - 10 Day TAT
Microscopy - 5-10 Day TAT
Test Analyte Method Price Matrix UnitSilica, Total Crystalline & Respirable (CCSEM)
Silica, Total Crystalline (Quartz, Cristobalite, Tridymite) & Respirable (Si Rich by CCSEM < 10 um)
NIOSH 7500 mod and Size Separation
$500-$705 Solid/Bulk Each
Qualitative Clay Phase ID (Expansive/Full)
Scan - Phase ID of Major Crystalline Materials plus Phase ID of Clays i.e. Bentonite
USGS Mineral ID $345-$550 Each
XRF - 10 Day TAT (cont.)
Test Analyte Method Technique Price Matrix UnitChemical/Elemental Composition, Semi-Quant Scan-Quantification of major
elementsSemi-Quant XRF $165.00 Solid/Bulk Each
Chemical/Elemental Composition, Quantitative (w/construction of calibration curve)
Quantification of calibrated elements
In-house XRF call for pricing Solid/Bulk Each
10 Day TAT after construction of curve
Method Price Matrix Unit PLM $150.00 Solid/Bulk Each
SEM call for pricing Solid/Bulk Hour
Other ServicesTest Method Technique Price Matrix Unit
Total Incombustible Content (Rock Dust) - Bulk MH 102 $50.00 Solid/Bulk Each
MSHA Welding Fume Profile-14 analytes (As, Be, Cd, Cr, Co, Cu, Fe, Pb, Mg, Mn, Mo, Ni, V, Zn)
OSHA ID 125 / NIOSH 7300 ICP-AES $210.00 Air Group
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
77
Asbestos Analytical ServicesAsbestos Analytical ServicesTEM - 5 Day TAT unless otherwise indicated
Type of Analysis/Service Price Per Sample Turnaround
AHERA Clearance Samples - Air (Submitted in sets of five) $75.00 5 working days
NIOSH 7402 Methodology – Air $106.00 5 working days
NIOSH 7402 – Air w/RCF Fibers $168.00 5-working days
ISO 10312 (direct) - Air $262.00 10 working days
ISO 13794 (indirect) - Air $321.00 10 working days
ISO 22262-2 – Bulk $577.00 10 working days
ASTM D5756 – Bulk $577.00 10 working days
ASTM – Dust 5755 - Microvac $160.00 5 working days
ASTM D6480 – Surface dust wipe $160.00 5 working days
USEPA 100.1 - Non-potable water $230.00 5 working days
USEPA 100.2 - Drinking Water $190.00 5 working days
Chatfield SOP-1988-02/NY ELAP 198.4 (NOB) - Bulk $75.00 5 working days
Sludge or Mud sample: (weight percent) $510.00 10 working days
USAEPA Draft Contract 68-02-3266 (Yamate) - Level I $85.00 5 working days
USAEPA Draft Contract 68-02-3266 (Yamate) - Level II $158.00 5 working days
USAEPA Draft Contract 68-02-3266 (Yamate) - Level III Call for Quote
Phase Contrast Microscopy (PCM)
NIOSH 7400 Methodology – Air (Sampling media available upon request Media for additional fee.)
$13.00 5 working days
Gravimetric Reduction Prep is recommended for problem matrix materials such as NOB’s (Non-Friable Organically Bound Materials).
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
78
Asbestos Analytical ServicesAsbestos Analytical Services
Polarized Light Microscopy (PLM)
EPA 600/R-93/116 or NYELAP 198.1 -
Bulk (visual estimate - per layer) $16.00 per layer 5 working days
Untreated 400 Point Count $46.75 10 working days
Treated 400 Point Count $76.00 10 working days
Untreated 1000 Point Count $130.95 10 working days
Treated 1000 Point Count $160.50 10 working days
Soil/Rock/Raw Materials/Debris $53.50 10 working days
CARB 435 – serpentine aggregate $147.50 10 working days
ISO 22262-1 $53.50 10 working days
ISO 22262-2 Call for quote
Fly ash determination in sediment $127.00 10 working days
Component Characterization / Mineral ID Call for Quote
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
79
Construction Materials Laboratory ServicesConstruction Materials Laboratory ServicesRJ Lee Group routinely conducts testing and evaluation of construction materials including concrete, stucco and aggregate using petrography, chemical analyses and physical tests according to the standard methods listed below. We have significant experience in conducting small and large-scale analytical programs to assess defects and premature product failures. Please contact a representative to discuss your needs and to obtain a cost estimate.
Concrete Testing Method
Acid Soluble Chloride in Mortar and Concrete ASTM C1152 // AASHTO T260
Cement Composition Internal Method
Chemical Analysis of Cements ASTM C114 // AASHTO T105
Cement Content ASTM C1084
Concrete Coating Analyses Organic Chemistry and Microscopy
Concrete Contaminant Identification & Analysis Organic Chemistry and Microscopy
Concrete Petrography ASTM C856
Density, Absorption, and Voids in Hardened Concrete ASTM C642
Freeze/Thaw Durability ASTM C666
Mix Design Confirmation Internal Method
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
80
Construction Materials Laboratory ServicesConstruction Materials Laboratory Services
Standard turnaround times vary.
Aggregate Testing Method
Aggregate Sieve Analysis ASTM C136, ASTM C117
Crystalline Mineral Identification and Quantification X-ray Diffraction (XRD)
Iron Staining in Light Weight Concrete Aggregates ASTM C641
Petrographic Examination of Aggregates for Concrete ASTM C295
Slag Characterization for use as Aggregate Fill or Road Base Multiple Techniques
Sulfur Content and Speciation Multiple Techniques
Concrete Testing Method
Hardened Masonry Mortar Characterization ASTM C1324
Non-destructive Concrete Testing Services Multiple Techniques
Air Void Parameters in Hardened Concrete ASTM C457
Phase Identification & Quantification using Thermal Methods
TGA and DSC
Rapid Chloride Permeability Test (RCPT) ASTM C1202
Scanning Electron Microscopy of Hardened Concrete ASTM C1723
Water Soluble Chloride in Mortar and Concrete ASTM C1218
Water-Cement Ratio Estimation ASTM C856
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
81
Materials & Particulate CharacterizationMaterials & Particulate CharacterizationMaterials AnalysisOur analytical laboratory is supported by a team of subject matter experts whose experience spans the world of materials including: steel, ceramics, polymers, natural materials, composites, organics. Our facilities are equipped to evaluate material chemical composition, compositional distribution, and properties from the macro- to the micro- to the nano-scale. We evaluate component parts (large and small), thin films, welds, coatings, catalysts, fibers, pharmaceuticals, medical devices, construction equipment, concrete, and more. Field-deployable capabilities to perform analysis in situ are available, as well as contaminant, dimension, and composition analysis for additive manufacturing is also available.
Product Development and CommercializationWe help our clients transform their innovations into new products that can be manufactured reliably with the expected performance. We support their efforts in quality control measures and provide scientific insight to inform corrective actions. We perform accelerated life performance and remaining life assessment testing in simulated operational environments. We strive to work as partners with our clients in the development process or as a third party to demonstrate materials performance.
Particulate CharacterizationWhether foreign particulate assessments in pharmaceutical manufacturing, evaluation of nuisance dust claims or environmental health and safety issues, our experienced staff coupled with our suite of state-of-the-art electron microscopes are ideally suited to address even the most complex particulate issues. Our subject matter experts routinely assist our clients in recommending sampling proce-dures and protocols, determining particulate composition and ultimately the source of the particulate. We provide our clients with a scientific foundation to respond to regulatory concerns, institute appropriate health and safety measures, and establish mitigation procedures. Our experts are at the forefront of technical efforts surrounding nano-particulate and are avail-able to respond to inquiries regarding laboratory analysis of any type or field sampling strategies.
Learn more about our analytical capabilities & instrumentation on the next page »
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
82
Materials & Particulate CharacterizationMaterials & Particulate Characterization
Optical Microscopy 110-200 hr
Features: » Stereo optical microscopy » Polarized light microscopy » Digital microscopy (portable)
Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy (SEM/EDS) Call for Quote
Features: » Variable pressure and large-size chambers » Tungsten and field emission SEM » Secondary electron and backscattered electron imaging » Light element EDS detection » X-ray element mapping
Ultra High-Resolution In-Lens SEM/STEM Call for Quote
Features: » 60x - 2,000,000x » 0.2kV to 30kV accelerating voltage » Secondary and backscattered electron imaging » Dark field and bright field STEM imaging » Cold field emission source » 30mm2 SDD EDS detector
Particle sizing available upon request
Computer Controlled SEM (CCSEM) Call for quote
Inclusion Analysis / Steel Cleanliness Analysis
Particle Size Distribution (PSD) Analysis
Particle Size Distribution with Elemental Composition (PSD/EDS) Analysis
High Atomic Number (High-Z) Feature/Particle Analysis
Rates are based on a standard turn-around time and do not include interpretation or report preparation. Please call for a project-specific quotation.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
83
Materials & Particulate CharacterizationMaterials & Particulate Characterization
High Resolution Scanning Transmission Electron Microscopy (STEM) Call for quote
Features: » 100x - 10,000,000x » 120kV or 200kV accelerating voltage » SE, DF, and BF imaging » Electron diffraction » Field emission source » EDS detector
Particle sizing available upon request
Transmission Electron Microscopy Call for quote
Features: » 120kV or 200kV accelerating voltage » Electron diffraction » EDS detector
X-ray Photoelectron Spectroscopy (XPS) Call for quote
Survey Spectra (Qualitative and quantitative information)
Depth Profiling Analysis
High Resolution Spectra (Chemical state analysis)
Line Scans
Area Mapping
Raman Spectroscopy Call for quote
Features: » High spatial and spectral resolutions (800mm spectrometer) » 3 laser sources: 473nm (blue), 633nm (red), 785nm (near IR) » Wide mapping capabilities from 2 microns to 100mm x 80mm » High precision, ultra-fast confocal imaging
Rates are based on a standard turn-around time and do not include interpretation or report preparation. Please call for a project-specific quotation.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
84
Materials & Particulate CharacterizationMaterials & Particulate Characterization
Metallurgical Services Call for quote
Full-Service Metallography Lab (Etching, sample cross sectioning, drilling, cutting, mounting,
grinding, polishing, grain size analysis)
Heat Treatment
Hardness/Microhardness Testing
Corrosion Assessment and Testing
Metallurgical Modeling
Field Deployable Services: » Digital Microscopy (Portable) » Surface Replicas » Handheld XRF for Chemical Analysis » Field Metallography and Microstructural Evaluation
Non-Destructive Evaluations Call for quote
Dye Penetrant Testing
Magnetic Particle Inspection
Impact Echo
Radiography
Fourier Transform Infrared (FTIR) Spectroscopy 400 ea
Attenuated Total Reflectance (Ge crystal)
Grazing Angle
Reflectance
Raman AnalysisRates are based on a standard turn-around time and do not include interpretation or report preparation. Please call for a project-specific quotation.Additional preparation fees may apply.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
85
Materials & Particulate CharacterizationMaterials & Particulate Characterization
Gas Chromatography with Mass Spectrometric Detection (GC/MS) Call for quote
Elemental Analysis (AA, ICP/AES, ICP/MS, OES, Leco) Call for quote
Surface Area /BET Analysis (Gas adsorption - desorption) 100-350 ea
Particle Sizing by Laser Light Scattering 200 ea
Environmental Chamber Testing 50 day
TGA / DSC
Thermogravimetric Analysis (TGA) 150 ea
Differential Scanning Calorimetry (DSC) 250 ea
Simultaneous DSC/TGA 400 to 600 ea
Sample Preparation Services
Ultra-microtomy 150 hr
Electropolishing, Tripod Polishing, & Electrojet Polishing 150-175 hr
Carbon & Metal Coating 65 hr
Extraction Replicas 110-150 hr
Dimple Grinding 150 hr
Unique sample preparations developed per client or sample requirements Call for quote
The above prices are provided as reference only and refer to the cost of analyzing per sample per run under our standard conditions. Any changes to these conditions might result in additional changes. These might include method development and set up fees, hourly run times fees, and data processing fees. Please call for details and project-specific quotation.
Rates are based on a standard turn-around time and do not include interpretation or report preparation. Please call for a project-specific quotation.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
86
Materials & Particulate CharacterizationMaterials & Particulate Characterization
Additional Testing & Services Available Call for quote
Auger Electron Spectroscopy
Wavelength Dispersive X-ray Spectroscopy
Mechancial Testing
Focused Ion Beam Sample Preparation
HR-TEM
Ion Milling
Additive Manufacturing Quality Control Testing
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
87
Granular Activated Carbon (GAC)Granular Activated Carbon (GAC)
Test Analyte Method
Grinding As required by method --
Moisture Moisture (oven) ASTM D2867 (TGA Leco)
Particle Size Test By Sieving Apparent Density ASTM D2854
Particle Size Distribution (PSD) ASTM D2862
Mean Particle Diameter, mm AWWA B-604/ASTM D2862
Effective Size AWWA B-604/ASTM D2862
Uniformity Coefficient AWWA B-604/ASTM D2862
Hardness Number Hardness Number ASTM D3802
Abrasion Number Abrasion Number AWWA B-604/ASTM D3802
Particle Size By Laser Diffraction Particle Size Distribution (PSD) In house (wet analysis)
Apparent Density Apparent Density ASTM D2854
BET Surface Analysis Specific Area In house
Volatile Matter Volatile Matter ASTM D3175 (TGA Leco)
Total Ash Total Ash ASTM D2866 (TGA Leco)
pH pH ASTM D3838
Contact pH pH ASTM D6851-02
RJ Lee Group’s accredited laboratory offers carbon analysis capabilities to help provide quality assurance across your product line. Our experts’ approach for activated carbon is to duplicate the analytical procedures our customers have instituted for their products using their exact methodologies, e.g., in-house methods, as well as traditional methodologies.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
88
Granular Activated Carbon (GAC)Granular Activated Carbon (GAC)Test Analyte Method
Water Solubles Water Solubles ASTM D5029-98
Halides and Sulfur Br, Cl, F and S Solid via Combustion & IC
Iodine Number Iodine Number AWWA B-604/ ASTM D4607/USP/FCC
Methylene Blue Number Methylene Blue Number JIS K 1474
Acid -soluble Ash Total Ash ASTM D-2866 (TGA Leco)
Acid -soluble Ash ASTM D6385
Acid-soluble Iron Acid-soluble Iron ASTM D6647 mod (ICP-AES)
Acid-soluble Ash and Iron Total Ash ASTM D2866 (TGA Leco)
Acid -soluble Ash ASTM D6385
Acid-soluble Iron ASTM D6647 mod (ICP-AES)
Board of Water Supply Metals/Anions/pH BWS 102.7
Prop 65 Sec 1.4 Column – As, Al, Sb Prop 65 Sec 1.4
GAC CA Prop 65 Section 1.5 Beaker – As, Al, Sb Prop 65 Sec 1.5
Block CA Prop 65 Section 1.6 Beaker Block – As, Al, Sb Prop 65 Section 1.6
Molasses Molasses number Client provide method/Molasses
Silver Extraction Ag content Call lab
RJLG is able to analyze powdered and pelletized activated carbon samples with the techniques listed above. Please call for more information and specific capabilities.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
89
Gypsum, Gypsum Products, Anhydride (CaSO4) Gypsum, Gypsum Products, Anhydride (CaSO4) and FGD Byproductsand FGD Byproducts
Elemental Analysis By borate fusion / XRF (majors) - ASTM E1621 By acid digestion / ICP-AES / ICP-MS (major, minors, trace including heavy metals)
XRD analysis for crystalline phase identification
XRD Rietveld Analysis for crystalline phase quantification (plus total amorphous component concentration if necessary)
Total and Respirable Crystalline SIlica by NIOSH 7500 mod (XRD)
Asbestos by PLM or TEM
Free-water, Combined water, Gypsum purity by ASTM C471
Silicon Dioxide and Other Acid Insoluble Matter by ASTM C471
Thermogravimetric analysis studies (TGA) / Loss on ignition (LOI) / Moisture
Soluble Salts by IC/ICP (Halogens, Alkali and Alkaline Earth Metals)
Water-Soluble Chloride by ASTM C1218/C114
Acid-Soluble Chloride by ASTM C1152/C114 or ASTM C471M
Elemental Sulfur (S8) by GC-ECD (ASTM C471M mod)
Sulfite (SO3) by Iodine titration (EPRI M2) or TGA
Total Sulfur (S) (multiple techniques including EPRI M4, ASTM D4239)
Calcium Carbonate (CCE-Calcium Carbonate Equivalent by ASTM C25)
Free lime (CaO) by ASTM C25
Gypsum USP and FCC monographs Identification Assay Impurities (Flouride by ISE, Lead and Selenium by ICPMS, Iron by ICP-AES) LOD - Loss on Dying
Whiteness
Particle Size Distribution (PSD) by laser diffraction or microscopy
Test
We have summarized product testing in the pages below. These tests are listed throughout previous sections in the guide. Product testing may not be routine, please call for a quote.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
90
Calcium Carbonate, Limestone, Dolomite & Calcium Carbonate, Limestone, Dolomite & Related ProductsRelated Products
Elemental Analysis By borate fusion / XRF (majors) - ASTM E1621 By acid digestion / ICP-AES / ICP-MS (major, minors, trace including heavy metals)
XRD analysis for crystalline phase identification
XRD Rietveld Analysis for crystalline phase quantification (plus total amorphous component concentration if necessary)
Total and Respirable Crystalline SIlica by NIOSH 7500 mod (XRD)
Asbestos by PLM or TEM
Calcium Carbonate Equivalent by ASTM C25
Free lime by ASTM C25
Thermogravimetric analysis studies (TGA) / Loss on ignition (LOI)
Purity
Current USP and FCC monographs Identification Calcium Carbonate Assay Acid Insolubles Substances Mg/Alkali Salts Heavy metals and metal impurities by ICP-AES / ICP-MS (Lead, Arsenic, Mercury, Iron, Barium) Fluoride by ISE LOD - Loss on Dying
Water-Soluble Chloride by ASTM C1218/C114
Acid-Soluble Chloride by ASTM C1152/C114
Whiteness
Particle Size Distribution (PSD) by laser diffraction or microscopy
Test
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
91
Coal and Ash (CCR - Coal Combustion Coal and Ash (CCR - Coal Combustion Residuals)Residuals)
Elemental Analysis By borate fusion / XRF (majors) - ASTM D4326 By acid digestion / ICP-AES (major, minors, trace) - ASTM D6349 and D6357 Hg by CVAA - ASTM D6414
Moisture, Ash, Volatile Matter by ASTM D7582
Sulfur by ASTM D4239
Chlorine by ASTM D4208
Test
Bag House DustBag House DustS-Sulfur by special digestion/ICP analysis (EPA 6010C)
Total Hex Chromium by IC (EPA 3060/7199)
Al,Be,Cd,Cr,Co,Mn,Mo,Ni,Se,Ti,V,Zn,As,Pb by special digestion ICP-AES/MS analysis (EPA 6010C, EPA 6020)
Test
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
92
TalcTalc
Elemental Analysis By borate fusion / XRF (majors) - ASTM E1621 By acid digestion / ICP-AES / ICP-MS (major, minors, trace including heavy metals)
XRD analysis for crystalline phase identification
Total and Respirable Crystalline SIlica by NIOSH 7500 mod (XRD)
Asbestos by PLM or TEM
Current USP and foreign Pharmacopeia Monographs Identification (FTIR) Mg, Fe, Ca, Al content Water and Acid Soluble Substances Acidity / Alkalinity Absence of Asbestos (FTIR/XRD) Loss on Ignition (LOI) Heavy metals
Thermogravimetric analysis studies (TGA) / Loss on ignition (LOI)
Whiteness
Particle Size Distribution (PSD) by laser diffraction or microscopy
Test
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
93
Kaolin/KaoliniteKaolin/Kaolinite
Elemental Analysis By borate fusion / XRF (majors) - ASTM E1621 By acid digestion / ICP-AES / ICP-MS (major, minors, trace including heavy metals)
XRD analysis for crystalline phase identification
XRD Rietveld Analysis for crystalline phase quantification (plus total amorphous component concentration if necessary)
Total and Respirable Crystalline SIlica by NIOSH 7500 mod (XRD)
Asbestos by PLM or TEM
Current USP Monographs Identification LOI - Loss on ignition Heavy metals and metal impurities by ICP-AES / ICP-MS Acid Soluble Substances Carbonate Thermogravimetric analysis studies (TGA) / Loss on ignition (LOI) Whiteness
Whiteness
Particle Size Distribution (PSD) by laser diffraction or microscopy
Test
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
94
Detrimental MaterialsDetrimental Materials
Shop Products Mercury by CVAA Antimony, Bismuth, Cadmium, Lead, Tin, Zinc by ICP Halides (Bromide, Chloride, Fluoride) by IC Sulfur by ICP Phosphorous by ICP
Solid nonmetallic materials Mercury by CVAA Halides (Bromide, Chloride, Fluoride) by IC Sulfur by ICP
Test
Glasses, bioactive glasses, (bioglass), Glasses, bioactive glasses, (bioglass), borosilicate glasses and ceramicsborosilicate glasses and ceramics
Elemental Analysis By borate fusion/XRF (majors) - ASTM E1621 By acid digestion /ICP-AES / ICP-MS (major, minors, trace including heavy metals) Microwave Cold HF B
Other minerals and compounds RJLG offer analytical services for other materials such as perlite, clays (including bentonite), quartz/sand, garnets, diatomaceous earth, alumina, rutile, calcium citrate, hydroxyapatite, sodium and magnesium chloride etc. Please call for additional information.
Test
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
95
Pharmaceutical Analytical ServicesPharmaceutical Analytical ServicesTest Technique Price TAT Unit
USP 788 - Particulate Matter in Injections Light Obscuration (HIAC) $200.00 5 Day Each
Foreign Particulate Matter (FPM) - Full Particulate Characterization
FTIR, SEM/EDS, Raman, Optical Microscopy, PLM $950.00 5 Day
Each
Foreign Particulate Matter - FTIR FTIR Analysis $500.00 5 Day Each
Foreign Particulate Matter - SEM/EDS SEM/EDS Analysis $500.00 5 Day Each
Foreign Particulate Matter - XRD XRD Analysis $500.00 10 Day Each
Foreign Particulate Matter - PLM PLM Analysis $275.00 5 Day Each
Foreign Particulate Matter - Optical Optical Imaging and Sizing $200.00 5 Day Each
Foreign Particulate Matter (FPM) - Full Particulate Characterization
FTIR, SEM/EDS, Optical Microscopy, PLM $1,400.00 2-3 Day
Each
Foreign Particulate Matter - FTIR FTIR Analysis $750.00 2-3 Day Each
Foreign Particulate Matter - SEM/EDS SEM/EDS Analysis $750.00 2-3 Day Each
Foreign Particulate Matter - PLM PLM Analysis $400.00 2-3 Day Each
Foreign Particulate Matter - Optical Optical Imaging and Sizing $250.00 2-3 Day Each
Automated Particulate Characterization - CCSEM CCSEM Analysis $1,100.00 5-10 Day Each
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
96
Pharmaceutical Analytical ServicesPharmaceutical Analytical Services
Test Technique Price TAT Unit
Morphology and Content Uniformity Testing - FE-SEM FE-SEM Analysis $550.00 5-10 Day Each
Morphology and Content Uniformity Testing - High and Ultra High Resolution SEM/EDS HR SEM/EDS (Hitachi) $550.00
5-10 Day Hour
Morphology and Content Uniformity Testing - EDS Mapping
EDS Mapping $550.005-10 Day
Hour
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
97
Criminal Forensics (Trace Evidence)Criminal Forensics (Trace Evidence)Gunshot Residue Analysis by SEM - 5 to 10 Day TAT Price Unit
GSR Kits 300150
Stub sampleControl stub sample
Particle Extraction 400 Stub sample
ISID (Instant shooter identification kit) 500 Swab sample
ISID-2 Kits 500300
Swab sampleIndividual stub sample
XCAT Samplers/Lift Samplers 600 Strip sample
Additional Forensic Analytical Services
Trace Evidence Analysis (Fiber, hair, tape & cordage) 275 hr
Distance Determination 500 hr
Consulting 275 hr
Court Testimony3,000 (2,000 for each day over 2 days)
Day + expenses
Video Conferencing / Depositions 250 Hour + expenses
Products
Gunshot Residue Collection Kit (For skin) * 20 ea
Fabric/Surface Sampling Kit * 20 ea
Sales Tax: PA-7%, CA-9.75%, WA-8.3%, NY-8.875%)Shipping will be invoiced unless a shipping account number is provided.Additional charges may apply for work days longer than 12 hours.Call for additional information.
* GSR Skin & Fabric/Surface Sampling Kit Price deducted from Trace Evidence Analysis Price when kit & analysis are purchased from RJ Lee Group.
SG_R1_02082020
CONNECT WITH AN EXPERT1.800.860.1775 | [email protected]
98
1. FORMATION OF CONTRACT. Any term of Customer’s order or of releases pertaining thereto or in any communications from Customer, which is in any way inconsistent with or in addition to the Terms and Conditions set forth hereof, is objected to by RJ Lee Group (RJLG). In the event that the Customer objects to any of these Terms and Conditions, such objection shall be in writing and must be received and accepted by an RJLG signatory pri-or to commencement of work. The receipt of a Customer’s order for any of the services provided by RJLG shall be conclusively deemed to be acceptance of all these Terms and Conditions. RJLG’s failure to object to terms contained in any communication from Cus-tomer shall not be deemed to be a waiver of these Terms and Conditions. Any references to purchase orders or to other oral or written requests for services are for purposes of description only, and any terms contained therein shall not become part of this agreement. If Customer issues multiple purchase orders, releases or other requests for services, all such orders, releases and requests shall be subject to these Terms and Conditions regard-less of the provisions of any such order, release or request, and regardless of the method of order including, but not limited to, orders issued by telephone or orders issued by company purchase order or release.
2. PRICES. Prices for standard tests and services shall be in conformance with the RJLG standard price lists in effect at the time the order is accepted. Price lists are subject to change without notice. Where a single order provides for or contemplates multiple ship-ment dates, the price shall be determined at the time each release is accepted. Any test or service not listed will be sold at a price determined by RJLG. All charges for courier or expedited services used at the request of the Customer shall be prepaid; otherwise, RJLG reserves the right to invoice for these services. A premium will be charged for samples that must be processed on an expedited or special basis. RJLG reserves the right to charge 50% of the priority price differential for expedited samples that are requested but are canceled or otherwise not received by RJLG, or whose priority status is lowered by the Customer. Additional analysis requested after results have been reported will incur the cost per test/analyte plus an additional reporting fee(s).
3. SAMPLE MEDIA/SUPPLIES AND SHIPPING. RJLG provides standard media supplies to existing customers at no cost provided samples are returned to RJLG for analysis. If sam-ples are not returned within 90 days of the original order date, the Customer is responsible for all sampling media and associated shipping costs. Costs for specialty media shall be paid for by the Customer and are described in RJLG’s price lists or written quote/proposal for services. Shipping services shall be paid by Customer for requests for sample media that require shipment in less than two working days, and for shipments that have special handling requirements, including hazardous material shipments and international ship-ments. Sample shipping costs shall be paid for by the Customer unless otherwise agreed upon in a written quotation or proposal for services. All costs associated with the return shipment of samples shall be paid by the Customer. All return shipping costs for Customer supplied shipping containers shall be paid by the Customer.
4. TAXES. Prices do not include any applicable sales, value-added or similar taxes or any duties. All such taxes or duties, whether now in existence (or hereafter enacted), that are applicable to any services performed by RJLG shall be Customer’s responsibility. Such taxes and duties shall be added by RJLG to the invoice amount, where appropriate.
5. PAYMENT TERMS. Unless specified to the contrary in writing approved by an officer of RJLG, payment terms shall be net thirty (30) days after the invoice date. After the invoice due date, the lesser of one and one-half percent (1.5%) of the unpaid balance (annual rate of 18%) or the maximum late payment penalty charge permitted by law shall be added for each month or part thereof that payment is delinquent. RJLG has the right, at any time, to change the amount of credit or terms of payment or to withdraw credit and to require partial or full payment in advance as a condition of performing services. Payments shall be made regardless of the results of the testing or other services performed by RJLG.
6. PROCESSING SCHEDULES. All samples and other requests for services submitted by Customer to RJLG shall be processed by RJLG in accordance with RJLG’s normal schedul-ing procedures and are not guaranteed for any specific time or date. If RJLG agrees in writ-ing, by a duly authorized representative of the Company, to process Customer’s order by a certain date or in accordance with a certain schedule, RJLG shall make reasonable efforts to comply with such dates or schedules.
7. FORCE MAJEURE. RJLG shall not be liable for any delay in performance, or for non-performance, in whole or in part caused by the occurrence of any contingency beyond the reasonable control of RJLG including but not limited to fires, floods, labor troubles, strikes, break- downs, regulation order or requirement of any government, war (whether an official declaration thereof is made or not), failure or delay in transportation, act of any govern-ment or any agency or subdivision thereof affecting the terms of the contract or otherwise, judicial action, accident, explosion, storm or other act of God. Any such delays shall excuse RJLG from performance, and RJLG’s time for performance shall be extended for the period of the delays and for a reasonable period thereafter.
8. SUBCONTRACTING. In the event of unforeseen circumstances, such as workload, need for further expertise, or for the reasons described above (force majeure), RJLG may re-quest to subcontract work. The Customer will be immediately advised of the request and work will not commence until consent is received from the Customer, preferably in writing.
9. OTHER PROVISIONS CONCERNING SAMPLES AND REPORTS. Packaging and Labelin - Customer shall mark, package and protect all samples sent to RJLG. Suitability for Analy-sis - It is the responsibility of the Customer to ensure that samples are correctly taken, la-beled, and packaged. Samples must be accompanied with a Chain-of-Custody form along with any potential hazardous warnings, including appropriate Safety Data Sheets (SDS). RJLG reserves the right to refuse samples for analysis which are obviously unsuitable due to damage, incorrect or insufficient labeling, incorrect sample loading, or that may be deemed to be considered hazardous to RJLG personnel. RJLG will notify the Customer as reasonably soon as such a problem is identified and will discuss with the Customer the course of action to be taken. Detection Levels - Certain samples may present chemical or physical interference which could cause deviations of detection levels set forth by regula-tory organizations and methods.
10. USE OF SAMPLES AFTER TESTING. RJLG shall not be obligated to keep prepared samples or any remaining portions of samples for more than thirty (30) days after comple-tion of the requested analyses unless a prior written agreement has been made between RJLG and the Customer. After expiration of this thirty (30) day period, RJLG may either: return the sample to the Customer or dispose of the sample (shipping and handling fees or disposal fees may apply). If prior to expiration of the thirty (30) day period, the Customer
requests that RJLG place the sample in storage or return the sample to the Customer, RJLG reserves the right to charge a special handling or storage fee.
11. REPORTS. Where RJLG’s contract so stipulates, RJLG shall provide to Customer a writ-ten report(s) of the results of the testing and other services performed on Customer’s be-half. The extent, nature, form, and content of the report shall be determined by RJLG, at its sole discretion, unless RJLG and Customer agree to the contrary in writing signed by an officer of RJLG. RJLG assumes no responsibility for the manner in which samples are ob-tained or the effect that the method of obtaining such samples might have on the results of the tests performed by RJLG, or the Customer’s use or interpretation of the test results and reports provided to it by RJLG. When requested by Customer, RJLG will report preliminary test results by telephone, facsimile, and/or email. Any turn-around time requested by Cus-tomer shall be considered to be satisfied with such contact. All such preliminary results are provisional and subject to confirmation. The Customer shall specify the recipient of the preliminary report, by telephone, facsimile number, email address, or electronic data exchange (with prior approval from RJLG) to which the report shall be submitted and will designate an alternate recipient in the event the primary recipient cannot be reached. RJLG will use its best efforts to contact the designated recipient(s) but is not responsible for delays resulting from the failure of the recipient(s) to respond to inquiries. Additional fees may apply for the development, implementation, and on-going maintenance of an elec-tronic data exchange process. RJLG retains records of laboratory analysis for the period of time required by the appropriate accrediting body, according to contract requirements, or as per client-specific requests. RJLG reserves the right to assess record retention fees for those records that, at the client’s request, are retained beyond accreditation or contract re-quirements. In the event a Customer requests additional copies of archived reports, RJLG reserves the right to charge a fee for the retrieval and issuance of such documents.
12. WARRANTIES. Customer is solely responsible for the use and the interpretation of RJLG’s reports and test results. RJLG has no duty or obligation to provide services that it has not expressly agreed in writing to provide. The foregoing express warranties of RJLG are in lieu of all other warranties, express, implied or statutory, including but not limited to, any implied warranty of merchantability or fitness for particular purpose, and in lieu of any other warranty obligation on the part of RJLG.
13. LIMITATIONS OF REMEDIES AND DAMAGES (a) RJLG is solely responsible for the performance of this contract, and no parent, subsidiary or affiliated company, or any of its directors, officers, employees, agents or subcontractors shall have any legal responsibility hereunder, whether in contract or tort, including negligence.
(b) The sole and exclusive remedy of Customer, and responsibility of RJLG for any breach of warranty or other breach of contract, or any claim of negligence, shall be at RJLG’s sole option (i) to repair or replace any defective product, (ii) to correct any defective perfor-mance, (iii) to retest the same or a replacement sample without costs, (iv) to refund any amounts paid by Customer for the defective sample product or other service or (v) to refund any sample priority price differential if a sample is not processed within the time requested by Customer.
(c) In no event, shall RJLG be liable to anyone, whether in contract, strict liability, or tort, including the negligence of RJLG or its employees, agents or representatives, for any inci-dental, consequential, special or indirect damages of any kind or charter, under or arising out of any contract between the parties.
(d) RJLG’s maximum liability under or arising out of this contract shall be the contract price of any services improperly performed. Liability for injury or damage to persons or property arising out of this work shall be limited to the amount covered by the general comprehensive liability insurance carried by RJLG.
14. WAIVER. In the event of any default or breach of contract (or anticipatory breach) by Customer, RJLG has the right to refuse to provide any additional services to Customer. RJLG’s failure to enforce at any time or for any period of time any of the provisions of this contract shall not constitute a waiver of such provisions or the right of RJLG to enforce each and every provision.
15. AMENDMENTS. No addition or amendment to, or modification of, any printed pro-vision of these Terms and Conditions of Sale will be binding upon RJLG unless made in writing and signed by an officer of RJLG. Except to the extent expressly provided herein, no course of dealing, usage of trade, or course of performance will be deemed relevant to explain or supplement any provision of these Terms and Conditions of sale.
16. PERIOD OF LIMITATION OF ACTION. No action shall be brought against RJLG for any breach of this contract after a period of more than one (1) year after the performance of work by RJLG.
17. GOVERNING LAW. The validity, construction, and performance of this contract and the transactions to which it relates shall be governed by the laws of the Commonwealth of Pennsylvania. All actions claims or legal proceedings, in any way pertaining to this con-tract or such transaction, shall be commenced and maintained in the courts of such Com-monwealth or in the United States District Court for the Western District of Pennsylvania and in no other court or tribunal whatsoever, and the parties hereto each agree to submit themselves to the jurisdiction and venue of such courts.
18. LIMITATION OF USE AND DISSEMINATION. Test results and reports prepared by RJLG are prepared and intended solely and exclusively for the person or entity named on such test results or report and are therefore not to be used or relied on by any other person or entity.
Terms & Conditions of Sale for RJ Lee Group ServicesTerms & Conditions of Sale for RJ Lee Group Services