Laboratory Equipment - Lab Equipment, Lab … Culture Plastics Sterilisation ... laboratory...

LABORATORY TECHNOLOGY

Laboratory Equipment

Cell BiologyCO2 IncubatorsSafety Cabinets

H2O2 Decontamination

Laminar Flow Cabinets Tissue Culture Plastics

SterilisationAutoclaves

Media PreparatorsMedia Pourers

-86°C Freezer StorageUltra Low Freezers

Labelling

Pure WaterPrimary Grade

General Lab GradeUltrapure

Ring MainsConsumables

General Laboratory Pipettes

Pipette TipsElectronic Pipettes

01www.triplered.com

Certificate No. FS 558309

4635

Model Chamber Exterior Dimensions Volume (WxDxH in mm)

NU-5700 160 635 x 698 x 896.5

NU-5710 160 635 x 698 x 896.5

NU-5800 200 673 x 691 x 1054

NU-5810 200 673 x 691 x 1054

NU-5831 200 673 x 691 x 1054

NU-5841 200 673 x 691 x 1054


Mode Status Indicator(RUN or STANDBY)

Door Ajar Status

NuAire logo buttonleads to Sysyem(or Password) Menu

Service needed

USB Connection

Alarm Status menu

Status Display for Media InjectionPost IntegrationDevelopmental Test(PIDT) for EnvironmentalSampling

Measured Chamber Temperature

Measured ChamberCO2, RH and O2

International FormatDate and Time

01844 [email protected]

Triple Red is an ISO 9001:2015 company which is also accredited by UKAS to ISO 17025:2005. It is a progressive company committed to quality. The team can advise you every step of the way from purchase specifications and planning to installations, training, maintenance and service. An experienced and highly trained national team of engineers with Safe Contractor status are available to support you. All makes of pure water equipment can be serviced and a low-cost replacement scheme is on offer for ageing systems.

• UK telephone support line

• Nationally based experienced engineers

• 24/7 cover and on-call services

• Planned preventative maintenance

• Guaranteed call-out times

• Spare parts held in the UK

Triple Red not only supplies a range of high quality laboratory equipment and consumables for tissue culture and related applications, they are also a trusted British manufacturer of laboratory water systems.

The NuAire range of CO2 and hypoxic incubators are an exceptionally high quality range which incorporates HEPA filter technology providing a Class 100 environment with optional decontamination cycles.

All models come with an IR sensor, have a CO2 recovery time of less than 3 minutes and can easily be stacked. The HEPA filter forced air system means there is no fan in the chamber reducing any risk of contamination but still providing an even distribution of CO2 and heat.

Each range offers a high temperature decontamination cycle at 145°C as well as a hypoxic model with a zirconia sensor for the most sensitive experiments. The interior is highly polished, 16 gauge stainless steel with curved corners making it easy to clean. All incubators have the option of a CuVerro copper interior surface which inhibits microbial growth.

• NU5800 series to maximise space with 200 litre capacity

• NU5700 series to fit in smaller spaces including under bench with 160 litre capacity

NuAire CO2 and Hypoxic Incubators

Company Introduction Cell Biology

Features

• Recovery of CO2 to 5% in less than 3 minutes

• Decontamination cycle at 145°C or wet cycle at 95°C

• 4 shelves as standard

• Zirconia oxygen sensor control 0.5 - 21%

• Access port as standard

• Dual wavelength IR sensor

• Temperature versus Time History profile for last 7 days

• Optional individual doors to minimize nitrogen loss during door opening

• Low level of oxygen down to 0.5%

02 03www.triplered.com www.triplered.com


Model Width Interior Exterior (in m) (WxDxH in mm) (WxDxH in mm)

NU-543-300 0.9 873 x 654 x 724 1057 x 799 x 1572

NU-543-400 1.2 1178 x 654 x 724 1362 x 799 x 1572

NU-543-500 1.5 1483 x 654 x 724 1669 x 799 x 1572

NU-543-600 1.8 1788 x 654 x 724 1972 x 799 x 1572

NuAire Class 2 Biological Safety CabinetsThe NuAire range of safety cabinets offers the very best of protection for scientists whilst keeping a sterile environment for cell culture.

The unique patented HEPEX bag system means the air flow is constant and even right across the work zone, irrespective of the age of the filter. The high inflow air of greater than 0.5m/s makes it exceedingly safe which is why the NuAire cabinets come certified to all standards including BSEN12469:2000 and NSF49 ensuring biological containment is guaranteed. The wide 254mm window opening is comfortable for the operator and easy to work at. The stainless steel construction makes it robust, easy to clean and ensures a long life and value for money.

The disinfectant PHILEASAFE® is free from additives. The disinfection cycle ends in their full degradation into free oxygen molecules and water, with no residue.

All products are easy to use, safe, effective and non-toxic. It completely transforms decontamination without the need to use formaldehyde and other aggressive chemicals.

A typical safety cabinet decontamination will take less than 3 hours and is totally safe to use immediately. No residue and no more health and safety nightmares!

Phileas® GeniusThe Genius is suitable for small spaces and interiors such as safety cabinets or incubators.

Phileas® 25Can be used for safety cabinets and small laboratories 1m3 - 40m3.

Phileas® 75This is suitable for high diffusion capability appropriate for average size rooms and volumes. It is easy to move around on its own wheels with a retractable handle.

Phileas® 250The Phileas® 250 is the largest in the range and suitable to fumigate the largest of laboratories up to 600m3.

Hydrogen Peroxide Decontamination An Environmentally Friendly Process

The Phileas® range of decontamination products provides on-site biological decontamination and disinfection solutions utilising spinning disk and micro drop technologies with hydrogen peroxide.

NU-543 Features

• Patented HEPEX bag system giving unique even air flow

• Extended HEPA filter life

• High inflow air

• 254mm window opening as standard

• All stainless steel construction

• Ergonomic arm rest

• 2 electrical sockets

• Sliding, angled front window

• Low energy DC-EM motor

• Optimised balanced fan

Optional accessories

• Glass sides

• Motorised height adjusting stand

• H2O2 adaptor

• Extra arm rests

Features

Safe, quick and simple H2O2 decontamination

• Totally safe• Non toxic• Non-carcinogenic



28mm Feed fromClients Water Supply

DuplexSoftener

DrainDrain

Drain

StorageTank

RecirculationPump

0.2µm Filter

DICylinder

Points of Use

Control Panel(Power distribution

and Control / BMS Interface)

0.2Micron

VentFilter

Drain

Drain

UV

RO Unit

ROMembrane

FIPIPS

QI

5 MicronCarbonFilter

CX PG PG

PTX

Typical Triple Red Ringmain Design Project

WATER TECHNOLOGY

Laminar Flow CabinetsVertical Laminar FlowFlowFAST V cabinets are ISO Class 3 which provide excellent product protection and efficiency better than 99.995 % MPPS (EN-1822).

The FlowFAST V range come with epoxy coated steel structure and stainless steel work surfaces making it easy to clean and comfortable to work at.

Horizontal Laminar FlowFlowFAST H cabinets are used for product protection from airborne contamination or handling non-pathogenic biological specimens. They guarantee and maintain excellent product protection factors by offering a decontaminated working area by virtue of the G3 pre-filter - and a H14 HEPA filter with an efficiency exceeding 99.995 % MPPS (H14 - EN:1822).

• Microscope work

• Microbiology

• Preparation of culture media

Chemical Fume HoodsChemFAST Top and ChemFAST Elite fume cupboards provide a safe working environment together with fume containment for protection from chemicals, vapours and aerosols in the laboratory. All functional and operational parameters are monitored by a microprocessor control.

Applications

• Clinical diagnostic testing

• Biological and medical research

• Analytical chemistry

• Quality control

• Biotechnology

• Pharmaceutical

• Food

• Petrochemical

• Cosmetic

Ringmain Design and Installations

Consumables

Our on-site, qualified design and projects team are able to offer a full design and installation service for all your water distribution needs.

Features

• Experienced consultants to support your planning process

• Turnkey project management

• Computer aided design plans can be integrated with site plans

• Costs calculated to your budget

• Implementation by qualified engineers

• Commissioning and validation

• Ongoing support of your installation

Triple Red offer a selection of replacement cartridges for many pure water systems along with a complete service and repair plan to ensure the quality of water is maintained at all times.

Our qualified engineers are trained to the highest standards ensuring your pure water equipment is kept in optimum

condition. Competitive pricing gives you the opportunity to save money on your existing system whilst

maintaining your equipment to the highest level.

Features

• High quality consumables

• Qualified engineers

• Critical spare parts

• End user training

• Competitive pricing

• Discount prices on consumable packs

Pure Water



Water Quality Typical ApplicationsTriple RedSystem

Production/Dispense Rate

TYPE 3Primary grade waterRO water<20µS/cm

10-80 litres/hourLarger volumes available

Supply for:Higher purity water systemsFinal rinse glass washersSteam/humidity generatorsGrowth/stability chambers

TYPE 2General laboratory grade waterRO and DI water1-15MΩ-cm

10-50 litres/hourLarger volumes available

Many general laboratory applications requiring higher ionic purityBuffer make upMedia productionSample dilution and reagent preparationGeneral chemistry

TYPE 1Ultrapure water18.2MΩ-cm

2 litres/minute(Fed from a local or ring main supply)

Many sensitive laboratory applications including:Cell and tissue cultureMolecular biology

Puro

Geno

Alto

TYPE 21-15MΩ-cm

TYPE 118.2MΩ-cm

Type 2: 10-20 litres/hour

Type 1: 2 litres/minute

Where ultrapure water is required inaddition to laboratory grade waterDuo

Dimensions of all water systems(without dispenser)

mm Width Height Depth

490 500 290

Reservoirs

TANK30 410 500 240

TANK60 485 500 330

TANK100 485 800 340

Water Purification Equipment from Triple RedAll Triple Red water systems are designed and manufactured by our experienced in house engineers at our Buckinghamshire factory.

Built to ISO 9001:2015, the units incorporate the very latest technology and environmentally friendly features for Type 1, 2 and 3 water qualities.

Puro Primary Grade Type 3 Water

Features

• Low running costs

• Make-up rates range from 10-80 litres per hour

• Pressurised Feed

• Mount on the bench, wall or on top of the reservoir

• Choice of storage reservoir: 30, 60 or 100 litres

• One easy to change pre-filter

Geno Laboratory Grade Type 2 Water

Features

• Low running costs

• Integral boost pump

• Novel recirculation loop extends life of membranes and cartridges

• Choice of production rates


• Bench, wall or reservoir top mounting

• Easy to change consumables with realistic costs

Using high recovery reverse osmosis (RO) technology, Puro efficiently removes up to 99% of contaminants from mains fed water to produce primary grade water. Puro is a small footprint solution to feed glass washers or other laboratory equipment.

With the addition of the Endure DI packs Geno takes RO water to the next level of purity, providing laboratory grade, Type 2 water in three convenient production rates of 10, 20 or 50 litres per hour.

Alto Ultapure Type 1 Water

Duo Dual Quality Type 2 AND Type 1 Water

Features

• 2 litres/min dispense of 18.2MΩ-cm ultrapure water

• Dual wavelength 185nm and 254nm UV in a quartz thimble

• Endotoxin and nuclease free

• Integrated or remote dispenser

• Quiet operation

• Under-bench, on-bench or wall mounted

• Comprehensive monitoring of water quality including TOC (Total Organic Carbon)

Features

• Fast variable dispense of 18.2MΩ-cm ultrapure water – up to 2 litres per minute

• Novel recirculation loop extends life of membranes and cartridges

• Dual wavelength 185nm and 254nm UV in a quartz thimble

• Bench, wall or reservoir top mounting

• Endotoxin and nuclease free


• Comprehensive monitoring of water quality including TOC (Total Organic Carbon)

• Integral boost pump

Alto provides 18.2MΩ-cm water on demand. The systems are fed from a pre-treated supply and produce Type 1 water at up to 2 litres per minute instantly.

Output is either continuous or volumetrically dispensed. Select the dispense rate required with the intuitive and simple software controls. Alto has quick-change, long-lasting consumables provided in the start up package.

The innovative and unique Duo provides two water qualities within one easy to use system. Save on space, initial outlay and consumable costs. Type 2 water is available from the reservoir whilst Type 1 water is ready to dispense from the system or the remote dispenser.



SterilisationSystec AutoclavesManufactured in Germany, the new generation of Systec autoclaves offers the very latest technological advances in steam sterilisation for laboratories.

The corrosion resistant titanium grade stainless steel (316Ti) chamber provides high speed sterilisation cycles whilst using a fraction of the energy of more traditional autoclaves. All models are insulated to improve energy efficiency and have the option of high speed cooling cycles.

Systec Media Preparators are designed and manufactured to the same high specification as their autoclaves, ensuring a robust and convenient way to sterilise microbiological media.

The range can cater for a large range of media volume production requirements with preparation, sterilisation and dispensing in one simple automated process.

Systec Media Preparators

Features

• 10 to 120 litre capacity

• Titanium stainless steel

• Small footprint

• Fully automatic filling of media

• High speed cycles

• No risk of contamination after sterilisation

• No waste of media

• Full colour touch screen with 100 programmes

Triple Red offers a full UKAS validation service to ISO 17025:2005 for your autoclave or media preparator to give you the reassurance that your sterilisation cycles are performing accurately.

Our accreditation allows us to provide you with a certificate of calibration according to our scope which covers the following activities that are essential to the sterilisation process:

• Temperature • Pressure • Time

UKAS ISO 17025:2005 UKAS Accreditation

Plate Pourer/StackerThe Systec Mediafill Plate Pourer / Stacker offers a total solution for your media production requirements when coupled with a Systec Media Preparator.

This combination ensures total convenience and cleanliness in the production and pouring of media plates. Available with two different carousel options to accommodate either 220 or 440 Petri dishes, the Systec Mediafill will enable total automation of plate pouring and stacking. There is also the option of adding a printer enabling data to be printed directly onto the side of each plate.

Systec D Series Autoclaves• Horizontal bench top front loading autoclaves with seven different capacities from 23L to 200L.

Systec V Series Autoclaves• Vertical floor standing top loading autoclaves with eight different capacities from 40L to 150L.

Systec HX Series Autoclaves• High specification floor standing front loading autoclaves with five different capacities from 65L –1580L. Incorporate all of the advanced features already present on the DX and VX models plus a sophisticated touch screen control panel.

Features

• Impressive small footprint

• High speed cycles save time and energy

• Integrated steam generators

• Cool touch no heat released into room

• Internal memory

• Low energy efficient round chambers

• ISO: 14001 Environmental Management Accreditation

• Manufactured to ISO:9001

• Supported by Triple Red UKAS:17025 Accreditation

• Bench top or floor standing

• Top or front loading

• 2 door options for cat 3 laboratories

• Lightweight compared to other autoclaves



Model Chamber Exterior Dimensions Volume (WxDxH in mm)

NU-9483 487 890 x 870 x 1990

NU-9668 688 1130 x 867 x 1990

Freezer environmentLiquid nitrogen environmentAutoclave environmentHot water bath (100°C)Self-laminating labelLow profile (extremely thin) labelRemovable

F

S

A

R

N

L

H

CryogenicNuAire range of -86°C Ultra Low Temperature Freezers

Brady Printers and Labels

Features

• Eye level controls

• Exceptionally quiet operation

• Long lasting compressors

• Low force door opening

NuAire ultra low freezers are designed to meet and exceed the demands for environmentally safe storage of both large and small samples at temperatures down to -86°C.

These upright freezers are ideal for research, clinical or industrial applications and are available in sizes from 487-688 litres capacity. Two insulated inner doors maintain interior temperature during openings. A heated bypass coil around the inner doors reduces frost build up making it easier to access your samples. Consistent temperature uniformity throughout the chamber increases your cell viability.

Glacier freezers are RoHS compliant, utilise CFC-free refrigerants and insulation eliminating ozone depletion while efficient compressors minimize energy consumption reducing carbon footprint.

Freezer Racking Popular racking options include:

• Comfort range: Ergonomical sliding drawers for cryoboxes

• Eco range: Side access range constructed of light weight aluminium

Label holders available.

Eco racking options: cardboard, aluminium or stainless steel.

The Brady range of printers and labels cater for all your laboratory needs, including samples stored in extreme temperatures from -200°C to +100°C and a complete sample tracking system.

Printers Brady printers enable scientists to print highly specialised identification labels on-site and on demand.

The range provides small handheld, stand-alone printers through to larger volume desktop printers which can be linked to a PC using the Brady software.

Labels Brady’s FreezerBondz labels are designed specifically to be applied to samples which are already frozen. Polyester sample identification labels adhere to vials, centrifuge tubes, test tubes, straws and slides. They can resist freezer, autoclave and liquid nitrogen temperatures.

Features

• Labels to withstand LN2, -86°C, autoclaves and hot water

• Labels which are solvent resistant

• Labels suitable for research, clinical trials and long term storage

• Ink will not smear or fade

• Crisp, clear and readable text



Multiwell Plates Tissue Culture FlasksTissue Culture Dishes

Cell Scrapers Roller Bottles Centrifuge Tubes

Easy Flip Centrifuge Tubes CellATTACH Flasks Serological Pipettes

Mini Serological Pipettes Syringe Filters Vacuum Filtration

Cell Strainers Filter Upper Cups Tube Top Vacuum Filtration

General LaboratoryTissue Culture PlasticsThe high quality range of tissue culture plastic is sterilised by gamma radiation, is DNase/ RNase free as well as non-pyrogenic. A quality assurance process guarantees CE conformity EN ISO 13485:2003/ AC:2007 and ISO 9001:2008. A complete range of sizes and variations is listed on the website.

Features:

• Easy to open packs

• Resealable packaging

• DNase/ RNase free

• Made in Class 100 clean room

Pipettes

Classic These pipettes are ergonomically designed ensuring a soft two step plunger movement enabling “reverse pipetting technique”. Classics are available in single or multi-channel versions 8/12.

Pipette Controller This powerful yet quiet pump can fill a 25ml pipette in under 4 seconds. Along with a gravity setting the controller has two different speed modes. The controller can hold a seriological pipette while resting on the desktop stand.

Smart These fully autoclavable pipettes are surprisingly lightweight, yet robust. They are colour coded for easy identification and come in a number of sizes both single and multi-channel 8/12. Each pipette is calibrated in an ISO 17025 accredited laboratory and supplied with an individual QC and calibration report according to ISO 8655.

Electronic Pipettes These ultra light weight electronic pipettes make pipetting easy and effortless. Designed with a special focus on preventing RSI caused by extensive usage. They have multiple functions and a simplified interface. Secured calibration to EN ISO 8655 with password protection. A range of 5 variable volume sizes available.

Pipette Tips All our tips are produced from a high quality diamond finished mould using special medical grade virgin polypropylene. The innovative tip design ensures they fit with a wide range of pipettes. Available in bulk bags, boxes or reloading stacks.


Contact DetailsTriple Red LimitedUnit D4 Drakes ParkLong Crendon Ind EstLong CrendonBuckinghamshireHP18 9BA

Tel +44 (0) 1844 201142Fax +44 (0) 1844 203650e-mail [email protected] www.triplered.com


Triple Red is a specialist supplier of laboratory products for tissue culture and related applications.

As well as manufacturing its own high quality water systems in the UK, Triple Red sells, maintains and services a prestigious range of laboratory equipment.

For more information on any of our product ranges, you can contact us directly for a

brochure or download copies from our website.

16 www.triplered.com

Laboratory Equipment - Lab Equipment, Lab … Culture Plastics Sterilisation ... laboratory...

Documents

Transcript of Laboratory Equipment - Lab Equipment, Lab … Culture Plastics Sterilisation ... laboratory...