7/24/2015 Lab3 - Cisco Video Lab

http://ciscovideolab.com/mediawiki/index.php?title=Lab3 1/2

Lab3From Cisco Video Lab

Lab 3 - TPS Bridge Call utilizing One Button To Push (OBTP) Background:

In this lab we will be enabling One Button to Push(OBTP) across EX60 and CTS endpoints. Scheduling willbe done via TMS which now has the ability to manage CTS endpoints. Lab Section 1Add CUCM to TMS 1.Log in to cucm.collab.com a. User: administrator b. Password: Cisco12345

Figure 1 CUCM Login 2. Determine the MAC address of your CTS 500 Navigate to Device → Phone.Click "Find" to display all devices on this CUCM. Locate and note the Mac address for the CTS 500 andEX60 for your pod.

Figure 2 CUCM Phones 3. Create the credentials for TMS to connect to CUCM with. a. Navigate to UserManagement → Application User b. Click Find to show the existing accounts c. Click Add New d. Set theUser ID to TMSUser. Set the password to Cisco12345. Add the CTS 500 to this users controlled device list.

Figure 3 Application User Menu

Figure 4 Application User Configuration

g. Add the "Standard CTI Secure Connection" Group h. Click Save

Figure 5 Add User Group 4. Create the User Group for TMS authentication a. User Management UserSettings → Access Control Group b. Click Add New c. Create the TMS Collab Access Control group

Figure 6 TMS Collab Access Control Group 5. Assign roles to the TMS Collab User Group a. Click on theRelated Links Drop down and select assign roles

Figure 7 Assign Roles Menu b. Assign the roles as depicted in Figure 8. ADD ALL THE ROLESDEPICTED IN THE SCREEN SHOT.

Figure 8 Assign Access Control Group Roles c. Click Save 6. Add the TMSUser user to the above usergroup

Figure 9 Add Application user to control group

7. Navigate to Device → Phones. a. Click Find to bring up the list of devices. b. Open the CTS 500 for yourpod c. Scroll down to the Secure Shell Information sectiond. Verify the SSH Admin Life to 0. The default is

7/24/2015 Lab3 - Cisco Video Lab

http://ciscovideolab.com/mediawiki/index.php?title=Lab3 2/2

60 but we have changed it to 0 ahead of time so you won't have to reset the CTS unit which is a 10 minutereset.

Figure 10 SSH admin Life

8. Browse to http://tms.collab.com/tms a. Log in as "Administrator, Cisco12345 b. Navigate to Systems →Navigator c. Click the Infrastructure Folder d. Click Add Systems

Figure 11 Adding CUCM to TMS 9. Begin adding CUCM to TMS a. Specify the system address ascucm.collab.com b. Click advanced settings c. Under username: TMSUser password: Cisco12345 Note: Thescreenshot shows a different user name. Use the name that you configured which should be TMSUser d.Check Discover Non-SNMP

Figure 12 Adding CUCM to TMS e. Click Next f. Click Finish adding systems

Figure 13 Finish adding CUCM g. Click on the endpoint folder h. Click Add System i. Click From List j.Click CUCM j. Check the CTS 500 endpoints k. Click Next, you should she confirmation that your endpointwas added.

Figure 14 Add the CUCM endpoints to TMS

Lab Section 2 Schedule and complete OBTP conference 1. Create a new conference a. Click on Booking b.Click on New Conference Figure 15 - Click on New Conference

Figure 15 Booking a new conference

c. Click on all the endpoints d. Select the right arrow to add to the conference e. Click OK

Figure 16 Adding Endpoints to conference f. Click Save Conference g. Set the conference type to be “OneButton to Push” h. Set the start time to be 5 minutes in the future i. Click Save Conference Figure 17

Figure 17 Finalize Conference Parameters

2. After a minute your appointment should appear on the touch panels of each of your endpoints. Wait forthe start time of your meeting and click your One Button to Push.

Retrieved from "http://ciscovideolab.com/mediawiki/index.php?title=Lab3&oldid=658"

This page was last modified on 20 May 2012, at 18:11.This page has been accessed 1,369 times.