LAB 1 REPORT-ver2
4
GROUP LOGO LAB 1: UTP CABLE CONSTRUCTION & PROCEDURES Prepared Date: UTP Cable Construction & Procedures Centre of Studies Computer Technology and Networking (CTN) ~ 0 ~ UiTM GROUP LOGO LAB 1 REPORT Date GROUP MEMBERS:
-
Upload
nur-hafizah -
Category
Documents
-
view
66 -
download
1
Transcript of LAB 1 REPORT-ver2
GROUP LOGO
LAB 1: UTP CABLE CONSTRUCTION & PROCEDURES Prepared By:
Date:
UTP Cable Construction & Procedures
Centre of StudiesComputer Technology and Networking (CTN) ~ 0 ~ UiTM
GROUP LOGO
LAB 1 REPORT Date
GROUP MEMBERS:
GROUP LOGO
LAB 1: UTP CABLE CONSTRUCTION & PROCEDURES Prepared By:
Date:
TABLE OF CONTENTS
Introduction........................................................................................................................................ 1
Objectives....................................................................................................................................... 2
Hardware and Software Requirements............................................................................................2
UTP Cable Construction......................................................................................................................2
Twisted Pair....................................................................................................................................2
Unshielded Twisted Pair (UTP).....................................................................................................2
Procedure to Construct Cable......................................................................................................2
APPLICATION OF UTP CABLE IMPLEMENTATION..................................................................................2
Straight –through Cable..................................................................................................................2
Cross-over Cable.............................................................................................................................2
Rollover Cable.................................................................................................................................3
How To Assign Logical IP Addressing For Terminal.............................................................................3
How to Assign Static and Dynamic IP addressing............................................................................3
Conclusion.......................................................................................................................................... 3
Group Members Task Delegation........................................................................................................3
References......................................................................................................................................... 3
Appendix............................................................................................................................................ 3
Centre of StudiesComputer Technology and Networking (CTN) ~ 1 ~ UiTM
GROUP LOGO
LAB 1: UTP CABLE CONSTRUCTION & PROCEDURES Prepared By:
Date:
INTRODUCTION
Overview of lab 2 exercise
Objectives
Hardware and Software Requirements
UTP CABLE CONSTRUCTION
Twisted Pair
Introduction – explain concept (use your own words- cannot copy –paste technique) – one paragraph only
Unshielded Twisted Pair (UTP)
Intro - one paragraph only
Procedure to Construct Cable
General steps to construct those three types of UTP cable.
Straight –Through CableProvide the colour configurationFunctionAdvantage/disadvantage
Cross-Over CableProvide the colour configurationFunctionAdvantage/disadvantage
Rollover or Console CableProvide the colour configurationFunctionAdvantage/disadvantage
APPLICATION OF UTP CABLE IMPLEMENTATION
Straight –through CableIntroProcedure/steps – provide screen shot and logical design
Cross-over CableIntroProcedure/steps – provide screen shot and logical design
Centre of StudiesComputer Technology and Networking (CTN) ~ 2 ~ UiTM
GROUP LOGO
LAB 1: UTP CABLE CONSTRUCTION & PROCEDURES Prepared By:
Date:
Rollover CableIntroProcedure/steps – provide screen shot and logical design
HOW TO ASSIGN LOGICAL IP ADDRESSING FOR TERMINAL
IntroProcedure of Assigning IP Addressing to PCOther related info
How to Assign Static and Dynamic IP addressing
Discuss
CONCLUSION
GROUP MEMBERS TASK DELEGATION
REFERENCES
APPENDIX
Centre of StudiesComputer Technology and Networking (CTN) ~ 3 ~ UiTM
