Shivkumar Kalyanaraman Rensselaer Polytechnic Institute [email protected]
Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian...
-
Upload
colin-reeves -
Category
Documents
-
view
222 -
download
0
Transcript of Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian...
![Page 1: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/1.jpg)
Lab 1, Basic Linux and Networking Commands
Shiv Kalyanaraman
Yong Xia (former TA)
Vijay Subramanian
http://www.ecse.rpi.edu/Homepages/shivkuma
Google: “SHIV RPI”
Experimental Networking (ECSE 4690)
1
![Page 2: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/2.jpg)
Linux PC
Each PC at least has:- two 10/100 Mbps Ethernet
interface cards (NICs).
Two Ethernet interface cardswith RJ-45 connectors
PS/2 ports (Mini DIN 6)for mouse and keyboard
Serial ports(DB9)
VGA/SVGA Port (HD15)for monitor
Audio Jacks for Line-in,microphone, and output
eth0
eth1
ttyS0
ttyS1
PC1Power plug
USB ports
Parallel ports (DB25)
0 1Powerswitch
![Page 3: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/3.jpg)
Cisco Router
Routers are labeled: Each router has:
- a console port
- two 10 or 100 Mbps Ethernet interfaces
- two WAN serial interfaces
Router 1
0
1
Powerplug
Powerswitch
Auxiliaryport
Consoleport
WAN Serial ports(DB-60)
Ethernet AUI ports(DB-15)
![Page 4: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/4.jpg)
Linux commands Networking commands and tools Socket programming An introduction project Preview of the next lab
Basic Commands
4
![Page 5: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/5.jpg)
Basic Linux Commands
man – manual page (help info) pwd – present working directory ls – list content in current directory mv / cp / rm – move(rename) / copy / delete file mkdir / rmdir – create / delete a new directory chmod – change w/r/x modes of file ps – check process status kill – terminate process pipe operator >, >>, |
5
![Page 6: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/6.jpg)
Longer list: please explore if unfamiliar! ls ................. show directory, in alphabetical order logout ............. logs off system mkdir .............. make a directory rmdir .............. remove directory (rm -r to delete folders with files) rm ................. remove files cd ................. change current directory man (command) ...... shows help on a specific command more (file) ........ views a file, pausing every screenful telnet (host) ...... connect to another Internet site ftp (host) ......... connects to a FTP site passwd ............. change your password grep ............... search for a string in a file tail ............... show the last few lines of a file who ................ shows who is logged into the local system df ................. shows disk space available on the system du ................. shows how much disk space is being used up by folders chmod .............. changes permissions on a file bc ................. a simple calculator make ............... compiles source code gcc (file.c) ....... compiles C source into a file named 'a.out' gzip ............... best compression for UNIX files tar ................ combines multiple files into one or vice-versa
![Page 7: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/7.jpg)
Internet Protocols Stack
7
IP
TCP UDP
ATMSatellite
Ethernet
Packet-switched network IP is the glue Hour-glass architecture
- all hosts and routers run IP
- IP runs over everything
Common Intermediate Representation
ICMP
Cable
![Page 8: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/8.jpg)
TCP / UDP / IP
IP- Unreliable, best-effort service
- Connectionless: no per-packet or per-session state information inside network, each IP packet is delivered independent of all other packets
- Like post-office (USPS) mail
8
![Page 9: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/9.jpg)
TCP / UDP / IP
UDP- Datagram service: explicit boundary between packets
- What’s more than IP?
• Port number: multiplexing for applications
• Checksum: weak error detection (not correction!)
9
![Page 10: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/10.jpg)
TCP / UDP / IP
TCP- Many versions: Tahoe, Reno, SACK, Vegas ...
- Connection-oriented: per-session state variables maintained at end-hosts (but not in network, unlike circuit-switched and virtual-circuit approaches)
• Aka end-to-end “connection” or “association”
• Reliably setup and tear down the end-to-end association
- Reliable: uses ACK (“sender: receiver correctly got this packet”), checksum (“receiver: is this packet is correct or wrong?”) and window (multiple packets in flight: pipelined)
- Byte-stream: no application-packet boundary like UDP
- Congestion control: reduce demand during overload, to ensure stable statistical multiplexing of the network 10
![Page 11: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/11.jpg)
Basic Networking Commands
11
Mn
How to detect if another machine is alive, the path to it, and resolve its DNS name to ip address, etc. …?
![Page 12: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/12.jpg)
Input and output queues (buffers) Switch fabric (forwarding / routing)
12
A Router Model
Scheduler
queue 1
queue 2
……queue k
Classifier
buffer management
I 1
I 2
I m
O1
O2
On
router
![Page 13: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/13.jpg)
Basic Networking Commands
ping – check if machine is alive ifconfig – interface (ip addr / mask) configuration arp – link / network layer address mapping netstat – status info of network configuration telnet – remote terminal ftp – file transfer tool route – set static route of a machine traceroute – gather route information tcpdump – dump packet header nslookup – resolve DNS name of target hostname
Key : What can you infer about the network or end-to-end properties with these commands?
13
![Page 14: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/14.jpg)
Packet is processed at a router:- Packet enters at IP input queue from an interface (ifconfig)
- Calculate next hop router based on longest-prefix match of packet header destination IP address with routing table entry
• Routing table is maintained dynamically by a daemon (e.g. gated), or statically by route command
• View routing info etc. via netstat command
- If it’s an ICMP packet, further processing
• ICMP echo ping
- Decrement Time_To_Live (TTL), dicard packet if it’s zero and send ICMP error back to source traceroute
- Send packet to output queue (forwarding)
- Nslookup: gives ip address of a host (or router I/f) name
- Tcpdump can be used to view the whole packet! 14
Consider a Packet’s Life in a Router
![Page 15: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/15.jpg)
Project: Measuring RTT
Write program to measure round-trip time between two end host on the Internet;- Refer to ping: write a simple wrapper program..
Propose a model for RTT prediction, i.e., give a sequence of RTT measures, estimate the next RTT value.- Measure several values of RTT. What can you say
about the samples? If they are variable, what can you do to reduce the variability of the RTT estimate?
- Time series model
15
![Page 16: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/16.jpg)
Advanced Ideas: For Fun!
Can you correlate info across measurements using different techniques?- “Rocketfuel”: ISP maps
• http://www.cs.washington.edu/research/networking/rocketfuel/- Skitter: Internet Maps
• http://www.caida.org/tools/measurement/skitter/- Pathchar: bandwidth measurement
• http://www.caida.org/tools/utilities/others/pathchar/- Pathrate/Pathload: load/available bandwidth measurement
• http://www.pathrate.org/- Visualization tools & utilities:
• http://www.caida.org/tools/visualization/• http://www.caida.org/tools/utilities/
- King: end-to-end latency estimator• http://www.cs.washington.edu/homes/gummadi/king/
- Internet Traffic Archive: • http://ita.ee.lbl.gov/index.html
![Page 17: Lab 1, Basic Linux and Networking Commands Shiv Kalyanaraman Yong Xia (former TA) Vijay Subramanian shivkuma@ecse.rpi.edu .](https://reader035.fdocuments.in/reader035/viewer/2022062309/56649eb45503460f94bbc62f/html5/thumbnails/17.jpg)
New Book on Internet Measurement
Mark Crovella, Bala Krishnamurthy, “Internet Measurement” John Wiley, July 2006.
http://www.amazon.com/Internet-Measurement/dp/047001461X/sr=8-1/qid=1156883575/ref=pd_bbs_1/103-0724620-5882241?ie=UTF8
Consider this if your term project will involve measurement etc…