Lab 08: AEV Design Analysis Tool Advanced Energy Vehicle (AEV)
-
Upload
sydney-sims -
Category
Documents
-
view
218 -
download
0
Transcript of Lab 08: AEV Design Analysis Tool Advanced Energy Vehicle (AEV)
Lab 08: AEV Design Analysis ToolAdvanced Energy Vehicle (AEV)
AEV Project Objective(Problem Definition)
INITIAL CONCEPTS(Brainstorming)
EXPERIMENTAL RESEARCH
ANALYZE
DESIGN DECISION
RESEARCH
COMPARE
FINAL DESIGN
Present AEV Design
PT 1PT 2PT 3PT 4
(System Analysis)(Programming)
Learning Objectives Become familiar with the MATLAB based Design
Analysis Tool
Be able to upload wind tunnel/Arduino data into the Design Analysis Tool
Conduct performance analysis of the AEV operation with the tool
Be able to export plots for documentation and support
Design Analysis Tool The purpose of creating and utilizing a design
analysis tool is to increase productivity in the performance test phase of the project.
The project is now in the design cycle consisting of meeting four performance tests throughout the project.
Coded in-house in MATLAB to work with Arduino and Excel.
Design Analysis Tool - Features
Propulsion Efficiency
Performance Analysis
File Menu:1. Loading Wind
Tunnel Data (.xls)2. Loading Arduino
EEProm Data (.mat)
Tools Menu:1. Download EEProm
Arduino Data2. Export the plot3. Clear File4. View the Excel
Sheet of data5. View the Arduino
Program if uploaded
6. Upload an Arduino Code
Downloading Arduino DataTools Menu:1. Download EEProm
Arduino Data
Select COM Port
Append the Arduino Code (optional)Save the EEProm Arduino Data
Follow the Lab Manual on how to bring up the various plots and figures
Format for the Rest of the Semester Lab is now 3 days a week with a small lecture
associated with each lab given in Lab # A.
Lab # A – Starts the Lab week with Test Readiness Review
Lab # B – Continue working on completing the task(s)
Lab # C – Ends the Lab week with Lab Memo due the following week
Documents for the Rest of the Semester Test Readiness Review (TRR) – Short length executive summary that
summarizes the lab’s objective and what each student is responsible for doing.
Performance Test (PT) Executive Summary – Summarizes the results and findings from the week’s lab.
Preliminary Design Review (PDR) – Midterm report that demonstrates that the preliminary design meets all system requirements with acceptable risk and is within cost and schedule constraints while establishing the basis for the detailed design.
Critical Design Review (CDR) – Final report that demonstrates that the final design met all system requirements with acceptable risk and was within cost and schedule constraints.
Performance Test 1 – Test Readiness Review Requirements A small document reviewing what the
team is going to accomplish this week and who is going to accomplish what tasks.
Performance Test 1: Create two different AEV vehicles and determine which system is a better, energy efficient vehicle.
Due: Beginning of PT1 – Lab 9A!
Questions?