L96C5_spec
2
02-2011 t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change. 6W Pendant L96C5 SPEC SHEET Application: Indoor pendant downlight illumination. Electrical: 6 x 1W LEDs powered by 300mA remote driver (not included). Input Current: 300mA Input Voltage: 24V DC Power Consumption: 6W Recommended Driver: TLDAV100W24V. 0~10V dimming with remote dimmable driver available (not included). Consult factory. Weight: 1.87lbs (0.846kg). Material: Anodized aluminum. Mounting: Mount to standard J-box (not included). Approval: Dry locations. Approved to US and Canadian standards by CSA. 40 CAUTION: LED DRIVER MUST BE USED AS THE POWER SUPPLY. USING A TRADITIONAL LOW VOLTAGE 12V TRANSFORMER WILL NOT WORK AND WILL DAMAGE LEDS. Type: Project: Modified: Quantity: Notes: C5 = Ø4-5/8” x 1-1/8” canopy Ø4-5/8” Ø117mm Ø3” Ø76mm 3-1/2” 89mm 1-1/8” 29mm 12-1/8” 308mm 6” 152mm stem 6-3/8” 162mm MA = matte clear anodized BA = black anodized CODE MOUNT COLOR BEAM CORD / STEM FINISH L96 C5 - 25 - S6 = 6” (152mm) stem SX = custom stem C72 = 72” (1829mm) cord CX = custom cord 25 = 25° beam W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W30H = 3000K, high CRI
-
Upload
mp-lighting -
Category
Documents
-
view
212 -
download
0
description
http://www.mplighting.com/pdf/spec/L/L96C5_spec.pdf
Transcript of L96C5_spec
02-2011
t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change.
6W Pendant
L96C5SPEC SHEET
Application: Indoor pendant downlight illumination.
Electrical: 6 x 1W LEDs powered by 300mA remote driver (not included).
Input Current: 300mA Input Voltage: 24V DC Power Consumption: 6W Recommended Driver: TLDAV100W24V. 0~10V dimming with remote dimmable driver available (not included). Consult factory.
Weight: 1.87lbs (0.846kg).
Material: Anodized aluminum.
Mounting: Mount to standard J-box (not included).
Approval: Dry locations. Approved to US and Canadian standards by CSA.
40
CAUTION: LED DRIVER MUST BE USED AS THE POWER SUPPLY. USINg A TRADITIONAL LOW VOLTAgE 12V TRANSfORMER WILL NOT WORK AND WILL DAMAgE LEDS.
Type:
Project:
Modified:
Quantity:
Notes:
C5 = Ø4-5/8” x 1-1/8” canopy
Ø4-5/8”Ø117mm
Ø3”Ø76mm
3-1/2”89mm
1-1/8”29mm
12-1/8”308mm
6”152mm
stem6-3/8”162mm
MA = matte clear anodizedBA = black anodized
Code Mount Color BeaM Cord / SteM FiniSh
L96 C5 - 25 -
S6 = 6” (152mm) stemSX = custom stem C72 = 72” (1829mm) cordCX = custom cord
25 = 25° beamW27S = 2700K, std CRIW30S = 3000K, std CRIW35S = 3500K, std CRIW41S = 4100K, std CRI W30H = 3000K, high CRI
Copyright © MP Lighting. All technical information in this document is subject to change. 12-2010
t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Photometric Data
Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the led lamp index located in the “downloads” section of each product webpage for the most current information.
6W Pendant
L96C5SPEC SHEET
approx. 2200 cdmax.
0°
180°
90°
45°-45°
-90°
9.0’
7.5’
6.0’
4.5’
3.0’
1.5’
3.3’
2.7’
2.2’
1.6’
1.1’
0.5’
3.3’
2.7’
2.2’
1.6’
1.1’
0.5’965.19
241.30
107.24
60.32
38.61
26.81
Center Beam FC Beam Width
0° Spread: 20.5°
90° Spread: 20.7°
Illuminance at a DistanceL9625°3000K Std510 lm
Polar Candela Distribution
