L18_spec
-
Upload
mp-lighting -
Category
Documents
-
view
214 -
download
0
description
Transcript of L18_spec
![Page 1: L18_spec](https://reader036.fdocuments.in/reader036/viewer/2022081817/568bd3da1a28ab203492a47e/html5/thumbnails/1.jpg)
3-3/8”
5”
1-3/4”
1-1/8”
44mm
86mm
127mm
29mm
2-1/8”54mm
2-1/2”64mm
3-1/4”83mm
3-3/8”
5”
1-3/4”
1-1/8”
44mm
86mm
127mm
29mm
2-1/8”54mm
2-1/2”64mm
3-1/4”83mm
t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada Copyright © MP Lighting. All technical information in this document is subject to change. 01-2011
1W / 2.5W Walkway
L18SPEC SHEET
Application: Wall, stair, and walkway illumination for indoor and outdoor applications.
Electrical: 1W LED powered by 120V primary, 3W 350mA non-dimmable integral driver or 2.5W LED powered by 120V primary, 700mA non-dimmable integral driver.
Input Current: 350mA (1W) / 700mA (2.5W) Input Voltage: 4V DC Power Consumption: 1W / 2.5W Recommended Dimmable Driver: LED8W350i (1W) and LED20W700i (2.5W). Dimmable driver not included. Consult factory.
Weight: 1.92lbs (0.873kg).
Material: Stainless Steel 316.
Mounting: Vertically or horizontally positioned face plate mounts to single gang box with flush mounted tamper proof screws. Optimal mounting distance is 18” - 24” (457mm - 610mm) AFF.
Approval: Wet and dry locations. Approved to US and Canadian standards by CSA.
66
Note: Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult MP Lighting factory.
Type:
Project:
Modified:
Quantity:
Notes:
W27S = 2700K, std CRIW30S = 3000K, std CRIW35S = 3500K, std CRIW41S = 4100K, std CRI W30H = 3000K, high CRI
12 = 12° beam30 = 30° beam120 = 120° beam
1 = 1W2 = 2.5W*
S6 = stainless steel 316
CoDE WattagE CoLor BEaM PLatE MatEriaL
L18 - - S6
V = verticalH = horizontal
*only available in W30S (3000K, std Cri).
Shown as Horizontal plate
Shown as Vertical plate
![Page 2: L18_spec](https://reader036.fdocuments.in/reader036/viewer/2022081817/568bd3da1a28ab203492a47e/html5/thumbnails/2.jpg)
approx. 700 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
0.51020
0.1 fc
Mount height: 1 ft Total LLF: 1
0
1
2
3
4
5
2 1 0 1 2 3
Isofootcandle PlotPolar Candela DistributionL181W, 12°3000K Std85 lm
approx. 275 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
0.51020
0.1 fc
Mount height: 1 ft Total LLF: 1
0
1
2
3
4
5
2 1 0 1 2 3
Isofootcandle PlotPolar Candela DistributionL181W, 30°3000K Std85 lm
approx. 42 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
1
5
20
0.1 fc
Mount height: 1 ft Total LLF: 1
0
1
2
3
4
5
2 1 0 1 2 3
Isofootcandle PlotPolar Candela DistributionL181W, 120°3000K Std85 lm
approx. 1300 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
0.55
20
0.1 fc
Mount height: 1 ft Total LLF: 1
0
1
2
3
4
5
2 1 0 1 2 3
Isofootcandle PlotPolar Candela DistributionL182.5W, 12°3000K Std162 lm
Photometric Data
Note: information is based on the most current data available; however, various operating factors such as reflectances and application type may cause differences between lab and field results. Due to continuous improvements, specifications may change without notice. Consult www.mplighting.com for the most current information.
Step 2 CF x Footcandle = New Mounting Height FC
Existing Mounting Height²
New Mounting Height²= Correction Factor
(CF)Step 1
Height Conversion Formula
t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the LED Lamp index located in the “Downloads” section of each product webpage for the most current information.
Copyright © MP Lighting. All technical information in this document is subject to change. 01-2011
1W / 2.5W Walkway
L18SPEC SHEET
![Page 3: L18_spec](https://reader036.fdocuments.in/reader036/viewer/2022081817/568bd3da1a28ab203492a47e/html5/thumbnails/3.jpg)
approx. 530 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
0.52.520
0.1 fc
Mount height: 1 ft Total LLF: 1
0
1
2
3
4
5
2 1 0 1 2 3
Isofootcandle PlotPolar Candela DistributionL182.5W, 30°3000K Std162 lm
approx. 82 cdmax.
-0°
-90°
0°
180°
90°
45°-45°
-90°
12.5
20
0.1 fc
Mount height: 1 ft Total LLF: 1
0
1
2
3
4
5
2 1 0 1 2 3
Isofootcandle PlotPolar Candela DistributionL182.5W, 120°3000K Std162 lm
Photometric Data
Note: information is based on the most current data available; however, various operating factors such as reflectances and application type may cause differences between lab and field results. Due to continuous improvements, specifications may change without notice. Consult www.mplighting.com for the most current information.
Step 2 CF x Footcandle = New Mounting Height FC
Existing Mounting Height²
New Mounting Height²= Correction Factor
(CF)Step 1
Height Conversion Formula
t 1.877.708.1184 f 604.708.1185 www.mplighting.com16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Note: Various operating factors may cause differences between lab and field results. as specifications may change without notice, please refer to the LED Lamp index located in the “Downloads” section of each product webpage for the most current information.
Copyright © MP Lighting. All technical information in this document is subject to change. 01-2011
1W / 2.5W Walkway
L18SPEC SHEET