L01 - MP LightingP paving stone flange depth: 5-1/2" (138mm) NB no back box or flange Aluminum...
Transcript of L01 - MP LightingP paving stone flange depth: 5-1/2" (138mm) NB no back box or flange Aluminum...
L01 Specification Sheet | 2020-03-30 | pg.1MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
Ordering Information
Date : Quantity :
Project : Note :
Type :
L01EXTERIOR | INTERIORIn-grade | For ground, ceilings, walls, and stairs
Wet, Damp, and Dry location
Product Version CCT & CRI Beam Angle 1 Glass Cover
Accessories 3 (optional)
Internal Angle Bracket 4
Mounting Kit 5
(optional)Flange & Back Box 6, 7, 8
Trim Finish 9
L01
1 1W2 2W
3-step MacAdam: W223S 2200K 80+W303H 3000K 90+W353H 3500K 90+ W413H 4100K 90+
2-step MacAdam: W272H 2700K 90+W302H 3000K 90+W352H 3500K 90+
S Spot 12°N Narrow flood 30°W Wide flood 120°
C clearF frostedA anti-slip 2
LM louver, matte anodized
LB louver, black anodized
HM hex louver, matte anodized
HB hex louver, black anodized
AB angled louver,black anodized
SB straight louver, black anodized
QB square louver, black anodized
RB ring louver, black anodized
PL Pinhole louver
0 no angle20 20° angleX custom
MK1 vertical surface
MK3 in-ground
Octagonal Aluminum Back Box with : S standard flange
depth: 2-7/8" (73mm)P paving stone flange
depth: 5-1/2" (138mm)NB no back box or flange
Aluminum Finishes:MA matte clear anodizedBA black anodizedBZ bronze anodized
Stainless Steel Finishes:S6 stainless steel 316PS6 polished stainless steelBT0 black stainless steel
Other Materials:ABZ antique bronzeABR antique brass PBR polished brass
System Components (Ordered Separately)
Remote Driver : * Consult MP Lighting Website or Factory.
Clear Form
Important NotesSpecification 1. See Light Distribution section for illustration of different combinations of beam angles and angle
bracket.2. Anti-slip is only available with Clear lens. Refer to Appendix or MP Lighting website for images and
details.3. Louvers will be below the glass cover. Only available when there is no Internal Angle Bracket.4. Internal angle bracket is factory set, and cannot be field adjusted. 5° increments to maximum of
20° without accessories.5. Mounting kit is ordered separately. Please consult factory.
6. For components included , refer to Luminaire Construction section.7. See pg.3 for back box and flange options.8. Paving stone flange is also recommended for a better cement/concrete flow. 9. Different finish options are only applicable to trim ring and not for LED module housing. Refer to
Appendix or MP Lighting website for complete look of luminaire with different trim finish options.
Specifications
Luminaire | Example Code: L01-2-W303H-S-C-LM-0-MK1-S-MA
Warranty Notes & Disclaimer Malfunction and damage to product due to incompatible dimming system or misuse will not be covered under warranty. Consult MP Lighting for recommended drivers. If the fixture has an option to be installed with a dimming control system, consult a dimming system manufacturer with minimum load before installing. MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make design changes to any of our products. Consult MP Lighting website for most updated documentation.
L01 Specification Sheet | 2020-03-30 | pg.2MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
Performance
Wattage Forward CurrentPower Consumption Budget per fixture (including driver)
LED output(Source)
Fixture Output(Delivered)
1W 350mA 1.3W 110 lm 47-62 lm
2W 700mA 2.6W 275 lm 75-79 lm
Application
Environment Dry / Damp / Wet Location approved. IP 68.
Drive Over Rating 9,700 lbs (4,400 kg)
Mounting Recessed: Designed to be cast into earth, gravel, or concrete or inserted into paving stones or pavers. Included backbox, flange and level for direct burial or casting applications.MK1 mounting kit (optional): Recommended for easy installation on vertical surfaces (e.g. stair risers, walls), and downward-facing surfaces (e.g. ceilings, soffits). See "Mounting Options & Dimensions, " or visit MK1MK3 mounting kit (optional): Recommended for thicker concrete slab and paving stone in-ground installation. Custom rectangular electrical box option is available for stair riser&wall installation. See "Mounting Options & Dimensions, " or visit MK3
Electrical
Electrical Compatible with remote constant current DC driver, wiring in series.
Control On/off control or phase dimming or 0-10V dimming with appropriate remote dimmable driver.
Luminaire Construction
Weight 1.8 lbs (0.816 kg). Typical Aluminum Insert & Back Box only.
Material Fixture: machined marine-grade aluminum, machined brass or machined stainless steel (316) with tempered glass
Supplied with Standard installation housing: Comes with an octagonal back box, a flange, an integral leveling device, a plastic cap, gel filled wire nuts, and silicone grease.Cable: 6” (152mm) factory-installed wire lead
Warranty & LED Life 5 years limited warrantyEstimated useful life of LED is 50,000 hours.
Ordered Separately
System Components Power supplies: remote driver Mounting kits: MK1 or MK3 (custom length rebar in MK3 supplied by contractors) Custom back boxes: see Pg.3-4 Mounting Options & Dimensions.
L01EXTERIOR | INTERIORIn-grade | For ground, ceilings, walls, and stairs
Wet, Damp, and Dry location
L01 Specification Sheet | 2020-03-30 | pg.3MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
Mounting Options & Dimensions
LED Insert Dimensions
Fixture Top View 3D View
1-5/8”41mm
2-5/16”59mm
2-1/2”62mm
trim 1/16”2mm
2-1/2”62mm
In-ground Installation (shown with MP Lighting Back Box | Order Code: EBX-OCT1-CSMA)
Box with Standard Flange Box with Standard Flange:During Concrete Installation
Box with Standard Flange:Complete Concrete Installation
2-7/8”72mm
Ø4-1/8”Ø106mm
Ø1-7/8”Ø49mm
7/8”22mm
M25 X 1.53/4" NPT
5-3/4”145m
Top of Flange1/4” (6mm)Finished Surface
In-ground Installation (shown with MP Lighting Back Box | Order Code: EBX-OCT1-CPMA)
Box with Paving Stone Flange: Box with Paving Stone Flange:During Paving Stone Installation
Box with Paving Stone Flange:Complete Paving Stone Installation
M25 X 1.53/4" NPT
5-1/2”140mm
3-5/8”91mm
Ø4-1/8”Ø106mm
5-3/4”145mm
Ø1-7/8”Ø49mm
Top of Flange1/4” (6mm)Finished Surface
L01 Specification Sheet | 2020-03-30 | pg.4MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
Mounting Kits
MK1(MK1-OCT1-C) : Ceiling, Wall, and Stair Riser Installation (shown with MP Lighting Back Box | Order Code: EBX-OCT1-CSMA)
Box with Standard Flange Box with Standard Flange & MK1:During Installation
Box with Standard Flange:Complete Installation
2-7/8”72mm
4-1/8”106mm
7/8”22mm
M25 X 1.5
3/4" NPT
5-3/4”145mm
Plywood Form Finished Surface
6" (152mm) threaded rod is supplied. Thread size: 3/8"-16
MK3: In-ground Installation (shown with MP Lighting Back Box)
Back Box MK3 with Standard Flange and Back Box
MK3 with Paving Stone Flange and Back Box
2-7/8”72mm
Ø4-1/8”Ø106mm
Ø1-7/8”Ø49mm
7/8”22mm
M25 X 1.53/4" NPT
5-3/4”145m
Top of Flange1/4” (6mm)Finished Pour Line
Rebar supplied by others. Recommended size: Ø1/2"
L01 Specification Sheet | 2020-03-30 | pg.5MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
Custom Rectangular Back Box for Wall Installation (shown with Standard Flange)1. For wall Installation, custom rectangular electrical boxes are available as alternative options.
MP Lighting Single Gang Back Box | Order Code: EBX-SGB1-CSMA
4-3/8”111mm
4-1/1”116mm
3-1/4”83mm
4-1/4”107mm2-7/8”
74mm
2-5/8”66mm
1-7/8”49mm
2-3/4”70mm
4-1/2”115mm
3-1/4”83mm
R1/4”R5mm
Scepter FD Back box | Order Code: EBX-SFD-CSMA
R3/8”R8.5mm
R1/4”R5mm 1-5/8”
41mm
4-1/4”107mm
1/4”5mm
2-7/8”74mm
2-3/4”70mm
1-7/8”49mm
4-1/2”115mm
5-1/4”133mm
3-1/4”83mm
L01 Specification Sheet | 2020-03-30 | pg.6MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
1W, 3000K, 90+ CRI
Polar Candela Distribution Beam Width: 12° Illuminance at a Distance
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
Distance Center Beam fc Beam Width
1.5ft 0.46m 295fc 0.5ft 0.15m 0.5ft 0.15m3.0ft 0.91m 73fc 1.0ft 0.30m 1.0ft 0.30m4.5ft 1.37m 33fc 1.6ft 0.49m 1.6ft 0.49m6.0ft 1.83m 19fc 2.1ft 0.64m 2.1ft 0.64m7.5ft 2.29m 12fc 2.6ft 0.79m 2.6ft 0.79m9.0ft 2.74m 9.4fc 3.1ft 0.95m 3.1ft 0.95m
Delivered Lumen: 49lm Vertical Beam Spread: 14.0° Horizontal Beam Spread: 14.3°
Polar Candela Distribution Beam Width: 30° Illuminance at a Distance
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
Distance Center Beam fc Beam Width
1.5ft 0.46m 175fc 0.8ft 0.24m 0.8ft 0.24m3.0ft 0.91m 43fc 1.7ft 0.52m 1.6ft 0.49m4.5ft 1.37m 20fc 2.5ft 0.76m 2.5ft 0.76m6.0ft 1.83m 12fc 3.3ft 1.01m 3.3ft 1.01m7.5ft 2.29m 8.5fc 4.2ft 1.28m 4.1ft 1.25m9.0ft 2.74m 6.4fc 5.0ft 1.52m 4.9ft 1.52m
Delivered Lumen: 62lm Vertical Beam Spread: 32.5° Horizontal Beam Spread: 32.1°
Polar Candela Distribution Beam Width: 120° Illuminance at a Distance
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180° Distance Center Beam fc Beam Width
1.5ft 0.46m 15fc 4.8ft 1.46m 4.9ft 1.49m3.0ft 0.91m 4.4fc 9.6ft 2.93m 9.8ft 2.99m4.5ft 1.37m 2.1fc 14.4ft 4.39m 14.7ft 4.48m6.0ft 1.83m 1.2fc 19.3ft 5.88m 19.6ft 5.97m7.5ft 2.29m 0.8fc 24.1ft 7.35m 24.5ft 7.47m9.0ft 2.74m 0.6fc 28.9ft 8.81m 29.4ft 8.96m
Delivered Lumen: 47lm Vertical Beam Spread : 116.1° Horizontal Beam Spread : 117.1°
L01 Specification Sheet | 2020-03-30 | pg.7MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
2W, 3000K, 90+ CRI
Polar Candela Distribution Beam Width: 12° Illuminance at a Distance
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
Distance Center Beam fc Beam Width
1.5ft 0.46m 525fc 0.5ft 0.15m 0.5ft 0.15m3.0ft 0.91m 140fc 1.0ft 0.30m 1.0ft 0.30m4.5ft 1.37m 62fc 1.6ft 0.49m 1.6ft 0.49m6.0ft 1.83m 35fc 2.1ft 0.64m 2.1ft 0.64m7.5ft 2.29m 23fc 2.6ft 0.79m 2.6ft 0.79m9.0ft 2.74m 16fc 3.1ft 0.95m 3.1ft 0.95m
Delivered Lumen: 78lm Vertical Beam Spread: 19.2° Horizontal Beam Spread: 19.2°
Polar Candela Distribution Beam Width: 30° Illuminance at a Distance
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
Distance Center Beam fc Beam Width
1.5ft 0.46m 335fc 0.8ft 0.24m 0.8ft 0.52m3.0ft 0.91m 82fc 1.5ft 0.46m 1.5ft 0.46m4.5ft 1.37m 38fc 2.3ft 0.70m 2.3ft 0.70m6.0ft 1.83m 23fc 3.1ft 0.94m 3.0ft 0.91m7.5ft 2.29m 15fc 3.8ft 1.16m 3.8ft 1.16m9.0ft 2.74m 11fc 4.6ft 1.40m 10.4ft 1.40m
Delivered Lumen: 79lm Vertical Beam Spread: 28.5° Horizontal Beam Spread: 28.5°
Polar Candela Distribution Beam Width: 120° Illuminance at a Distance
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180°
90°
0°
180° Distance Center Beam fc Beam Width
1.5ft 0.46m 28fc 4.8ft 1.46m 4.9ft 1.49m3.0ft 0.91m 8fc 9.6ft 2.93m 9.7ft 2.96m4.5ft 1.37m 4fc 14.4ft 4.39m 14.6ft 4.45m6.0ft 1.83m 2.5fc 19.2ft 5.85m 19.4ft 5.91m7.5ft 2.29m 1.8fc 24.0ft 7.32m 24.3ft 7.41m9.0ft 2.74m 1.4fc 28.9ft 8.81m 29.1ft 8.87m
Delivered Lumen: 75lm Vertical Beam Spread : 116.1° Horizontal Beam Spread : 116.6°
L01 Specification Sheet | 2020-03-30 | pg.8MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
TM30 Report
2700K, 90+CRI 3000K, 90+CRI
3500K, 90+CRI
L01 Specification Sheet | 2020-03-30 | pg.9MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
Light Distribution | 10ft Wall | Fixtures intalled 6" (152mm) away from the wall
L01 | 2W | 0° angle bracket | 10ft wall | Clear Lens | 3000K L01 | 2W | 20° angle bracket | 10ft wall | Clear Lens | 3000K
From left to right: PL Pinhole louver 10° S Spot 12°N Narrow flood 30°W Wide flood 120°
From left to right: PL Pinhole louver 10° S Spot 12°N Narrow flood 30°W Wide flood 120°
Light Distribution | 18ft Wall | Fixtures intalled 6" (152mm) away from the wall
L01 | 2W | 0° angle bracket | 18ft wall | Clear Lens | 3000K L01 | 2W | 20° angle bracket | 18ft wall | Clear Lens | 3000K
From left to right: PL Pinhole louver 10° S Spot 12°N Narrow flood 30°W Wide flood 120°
From left to right: PL Pinhole louver 10° S Spot 12°N Narrow flood 30°W Wide flood 120°
* Images will appear darker when printed.
L01 Specification Sheet | 2020-03-30 | pg.10MP Lighting © | www.mplighting.com | [email protected] | 604.708.1184
Appendix
Aluminum Finishes
MA matte clear anodized with anti-slip lens BA black anodized BZ bronze anodized
Stainless Steel Finishes
S6 stainless steel 316 PS6 polished stainless steel BT0 black stainless steel
Other Materials
ABZ antique bronze ABR antique brass PBR polished brass
Accessories
LM louver, matte clear anodized LB louver, black anodized HM hex louver, matte clear anodized HB hex louver, black anodized
AB angled louver, black anodized SB straight louver, black anodized QB square louver, black anodized RB ring louver, black anodized
PL pinhole louver, matte clear anodized PL pinhole louver, black anodized