L ARGE G ROUP M ANUFACTURERS U PDATE

LARGE GROUPMANUFACTURERS UPDATE

LARGE GROUPMANUFACTURERS UPDATE

AUSTIN, TX SATURDAY – APRIL 12, 2014

10:00 A.M. – 12:00 P.M.

AUSTIN, TX SATURDAY – APRIL 12, 2014

10:00 A.M. – 12:00 P.M.

WEB SITEWEB SITE

800-328-3352 - Live Operator 888-4-NuAire, (888-468-2473)

Enter Ext. Walt Johnson – 241 (Part-time) Jim McGowan - 256 Joe Bartee - 283 Greg Garelik - 239 Al Newton – 274 Steve Winget – 523 Adam Christensen-527 Jack Orloff - 255

Fax Number 763-432 4006

NUAIRE PHONE NUMBERSNUAIRE PHONE NUMBERS

Standard Airflow Products 36 Months A2/B1/B2 models w/DC-ECM motor

60 Months Laminar

60 Months

Polypropylene Hoods / Casework 12 Months Special Products 12 Months

NEW PRODUCT WARRANTYNEW PRODUCT WARRANTY

18 9 1 7 6 0 1 1 4 0 4

UnitSpecific Number

MM/DD/YY

SERIAL NUMBER IDSERIAL NUMBER ID

Need NuAire Approval RG Number Defective Part Tag Decon Papers Promptly Return Parts

RETURN PARTSRETURN PARTS

April 28 – 30 Biological Safety Cabinets (3 Days)May 1 – 2 CO2 Incubators (2 Days)

5 Centrifuge (1 Day)6 Ultra Low Temperature Freezer (1 Day)

June 24 – 27 Advanced Biological Safety Cabinets (4 Days)June/July 30 – 1 Incubators (2 Days)July 2 Centrifuge (1 Day) August 18 – 20 Biological Safety Cabinets (3 Days)

21 – 22 CO2 Incubators (2 Days)25 Centrifuge (1 Day)26 Ultra Low Temperature Freezer (1 Day)

October 21 – 24 Advanced Biological Safety Cabinets (4 Days)

27 – 28 CO2 Incubators (2 Days)29 Centrifuge (1 Day)

2014 TRAINING CLASS SCHEDULE2014 TRAINING CLASS SCHEDULE

UV Ballast have changed through the years from vendor Prior to the fall of 2008 4 wire ballast 2008 to the fall of 2012 3 wire ballast 2012 to present 4 wire ballast

When replacing a UV Ballast for cabinets with a 3 wire ballast a decon will need to be performed since the current ballast is a 4 wire configuration.

UV BALLAST RETROFITSUV BALLAST RETROFITS

ECM 5.0 Genteq Motor 1450 RPM PWM (DC signal) varies the motor speed Motor Control, Monitors RPM and torque which delivers

constant air volume as HEPA Filters load

ELECTRONICALLY COMMUTATED MOTOR

ELECTRONICALLY COMMUTATED MOTOR

STB0187DC ECM MOTOR UPGRADE

STB0187DC ECM MOTOR UPGRADE

Converting a NU-425 Series 20 and newer from an AC to a DC Motor 115V (Standard)

All other BSC Models Series 20 and Newer are Specs

DC ECM CONTROL SYSTEM A2DC ECM CONTROL SYSTEM A2

NU-425 – ES (Energy Saver) - Optional & Field Upgradeable NU-475, NU-629 – ES (Energy Saver) – Standard NU-201/301 (Energy Saver)

425/475/629 TYPE DC MOTORSPEED CONTROLLER SYSTEM

425/475/629 TYPE DC MOTORSPEED CONTROLLER SYSTEM

425 TYPE DC MOTORSPEED CONTROLLER SYSTEM

425 TYPE DC MOTORSPEED CONTROLLER SYSTEM

DC SPEED CONTROLLEROPTIONAL ON NU-425

DC SPEED CONTROLLEROPTIONAL ON NU-425

12 Volt DC Power supply Automatic Constant Airflow volume

Thru motor rpm feedback

Manual Airflow volume adjustment (POT) On-board jumper positions for correct cabinet size Speed Cont. locks in setting after 1 Minute idle or certifier sets

via push button & LED turns off

STB0245DESCRIPTION FOR MOTOR SPEED CONTROL

MODULE SOFTWARE - UPDATED VERSION 1.2.0008

STB0245DESCRIPTION FOR MOTOR SPEED CONTROL

MODULE SOFTWARE - UPDATED VERSION 1.2.0008

GENERAL AIRFLOW BOARD (GAFII)GENERAL AIRFLOW BOARD (GAFII)

NU-437, NU-477, NU-677 (A2) – ES (Energy) -Saver Standard GAF also used in NU-813, NU-126, NU-619 and all Isolators

AC Motor Output: Older Series NU-437 AC Impeller Output: Older Series NU-813, NU-126, NU-619

and Isolators DC ECM Motor Output: Std. on Current NU-437, NU-477,

and NU-677 DC EC Impeller Output: Std. on All Isolators

(S-10^) NR/NTE/PR; NU-813, NU-126, NU-619 Latest Software Release (Rev 1.6.0001), GAFII

Corrects increase motor speed (PWM signal) due to site specific events, (i.e. power fluctuations, frequent on/off cycles)

STB0202: RF Upgrade Installation Instructions

GAF CONTOR BOARDMULTIPLE BLOWER CONTROLS

GAF CONTOR BOARDMULTIPLE BLOWER CONTROLS

PTB0202GENERAL AIR FLOW (GAF)

SOFTWARE UPDATED INSTRUCTIONS FORMODELS NU-437 (SERIES 60 OR HIGHER)

PTB0202GENERAL AIR FLOW (GAF)

SOFTWARE UPDATED INSTRUCTIONS FORMODELS NU-437 (SERIES 60 OR HIGHER)

FLOWGARD ORDIGITAL MANOMETER REPLACEMENT

RF458 (437) / RF562 (797)

FLOWGARD ORDIGITAL MANOMETER REPLACEMENT

RF458 (437) / RF562 (797)

Previous 2012 & Newer

RF Kits include STB0153 and adaptor tubing

Replacement of GAF II Beginning in second half of 2014 Same basic design updated electronics Included FlowGard Monitor onto control board

GENERAL AIRFLOW BOARD(GAF III)


TOUCHLINKELECTRONIC CONTROL SYSTEM

TOUCHLINKELECTRONIC CONTROL SYSTEM

STB0248REPLACEMENT OF THE DIGITAL

VELOCITY SENSOR

STB0248REPLACEMENT OF THE DIGITAL

VELOCITY SENSOR

B2 – NU- 430 / NU- 435 / NU- 427EXHAUST AIRFLOW PRESSURE GRIDB2 – NU- 430 / NU- 435 / NU- 427

EXHAUST AIRFLOW PRESSURE GRID

Uses Static Pressure, Velocity Pressure and Temperature to measure airflow volume

Option for 8”, 10”, 12”, and 14” duct Option 8”, 10”, and 12” window access Master Reset reverts back to default setting. Optional selections

would need to be re-entered.

PTB0237 – TOUCHLINK DOWNLOADWITH USB FLASH DRIVE


UPGRADING

SOFTWARE

PLUG THUMB DRIVE INTOUSB PORT

PLUG THUMB DRIVE INTOUSB PORT

USB SCREEN ONCE DRIVERPRESENCE IS DETECTED


READY TO STARTPROGRAMMING THE NXP

READY TO STARTPROGRAMMING THE NXP

NXP PROGRAMMINGCOMPLETED SUCCESSFULLY

NXP PROGRAMMINGCOMPLETED SUCCESSFULLY



HISTORY

PERFORMANCE

MESSAGE WHILE UPLOADINGPERFORMANCE DATA

MESSAGE WHILE UPLOADINGPERFORMANCE DATA

MESSAGE ON COMPLETIONOF DATA UPLOAD

MESSAGE ON COMPLETIONOF DATA UPLOAD

CABINET DATA FORMATTEDINTO EXCEL

CABINET DATA FORMATTEDINTO EXCEL

BACNET BACNET

BACnet

A Data Communication Protocol forBuilding Automation and Control Networks BACnet is a ANSI, EN, ISO global standard Addresses both hardware and software applications Provides method to share information

TOUCHLINK 2012 UPDATEINSTALL BACNET DAUGHTER BOARD

TOUCHLINK 2012 UPDATEINSTALL BACNET DAUGHTER BOARD

PC

BSC BSC BSC

TOUCHLINK 2012 UPDATE Ethernet CONNECTION to BUILDING

AUTOMATION SYSTEM

TOUCHLINK 2012 UPDATE Ethernet CONNECTION to BUILDING

AUTOMATION SYSTEM

STB0115BSC ALTERNATE INFLOW MEASUREMENT METHOD

STB0115BSC ALTERNATE INFLOW MEASUREMENT METHOD

DIGITAL MONOMETER RETROFITVACS REPLACEMENT INSTALL

DIGITAL MONOMETER RETROFITVACS REPLACEMENT INSTALL

CLASS II TYPE A2CANOPY EXHAUST TRANSITIONS

CLASS II TYPE A2CANOPY EXHAUST TRANSITIONS

CANOPY EXHAUST TRANSITIONSAND MONITORS

CANOPY EXHAUST TRANSITIONSAND MONITORS

Traditional Fixed Flow (Low Profile) NU-906 / 907 / 908 (NU-475 / 477 / 480 / 481) NU-916 / 917 / 918 (NU-425 / 437 / 440) NU-926 / 927 / 928 (NU-407 / 602)

Monitors AIN – 200 – 813/126 AIN-315 (A2) AIN – 335 (Fume Hoods) Poly AIN – 350 CEM NU-956 – FlowGard Pressure NU-948 – Digital Pressure

New Variable Flow (Monitor Included) NU-911 (NU-475 / 477 / 480 / 481) NU-921 (NU-425 / 437 / 440)

BSC UPDATESBSC UPDATES

Fixed Range Low Profile Transition

NU-911/921 VFC TRANSITIONSTECH BULLETINS

NU-911/921 VFC TRANSITIONSTECH BULLETINS

VARIABLE FLOW CANOPY (VFC)VARIABLE FLOW CANOPY (VFC)

Low profile (5” housing, 8½” overall) Built-in low airflow alarm Variable air gap range (25 to 250cfm)

VFC FUNCTION / OPTIONSVFC FUNCTION / OPTIONS

Note: VFC Setup adjustment should be made with cabinet set atnominal airflows

1. Adjust slide plates and/or exhaust volume desired so average velocity measured in the center of the (3) test points of either side is between 150fpm (.76mps) and 550fpm (2.8mps)

2. Verify containment with the capture of smoke

3. Verify low exhaust alarm with loss of smoke capture with in 15 seconds

VFC SETUP INSTRUCTIONSVFC SETUP INSTRUCTIONS

VFC INTERFACE / SERVICEVFC INTERFACE / SERVICE

Alarm contacts Audible alarm silence contacts Front panel access for filter testing Remote Panel

Improved bag-in/bag-out designSingle port filter releaseSealed contaminated chamber

Optional double exhaust HEPA Filter design

NU-813 SERIES 30 UPDATENU-813 SERIES 30 UPDATE

New DesignWindow ramsWindow switchFold down control box Improved BIBO system with chain rackBag to keep powders from clean side of HEPAEC ImpellerDouble HEPA optionWaste chute optionOutlet option

NU-813NU-813

NU-813NEW CONTROL BOX

NU-813NEW CONTROL BOX

NU-813WINDOW SWITCH AND RAM

NU-813WINDOW SWITCH AND RAM

NU-813NU-813

NU-813 WASTE CHUTE

NU-813 WASTE CHUTE

NU-813NU-813

NU-813 HEPEX BARRIER

NU-813 HEPEX BARRIER

LAMINAR AIRFLOW CABINETS &SAFETY ENCLOSURES

LAMINAR AIRFLOW CABINETS &SAFETY ENCLOSURES

NU-201 / NU-301 UPDATESNU-201 / NU-301 UPDATES

Worksurface Improvements PVC Core Laminate or SST Full Stainless Steel (Option)

GMP ApplicationsBase is PVC core with w/SST

Standard EC Motor Energy Savings Lowered Noise

UV Curtain Interlock

HORIZONTAL CLEAN WORK STATIONHORIZONTAL CLEAN WORK STATION

Product Protection NU-201 and NU-301

Standard EC Motor Energy Savings Lowered Noise

UV Curtain Interlock

NU-201 / NU-301 UPDATESNU-201 / NU-301 UPDATES

Channel for vinyl curtain Secured under worksurface with Magnets Magnetic switch interlock

Curtain must be closed for light to operate

Must block 100% of UV light

NU-201 / NU-301 UV INTERLOCKNU-201 / NU-301 UV INTERLOCK

NU-201 / NU-301 UV INTERLOCKNU-201 / NU-301 UV INTERLOCK

NU-612 / 617 / 619SMALL ANIMAL

CAGE CHANGING STATIONS

NU-612 / 617 / 619SMALL ANIMAL

CAGE CHANGING STATIONS

NU-612 / 617 / 619 PREVENTATIVEMAINTENANCE CHECKLIST

NU-612 / 617 / 619 PREVENTATIVEMAINTENANCE CHECKLIST

612 / 617 Check caster for tightness to block Check screws in block for tightness

619 – Stem Caster Check caster for tightness to adaptor

619 – Plate Caster Each caster is secured with 4 bolts, washers, and lock

washers

CAGE CHANGING STATION PREVENTATIVE MAINTENANCE

CAGE CHANGING STATION PREVENTATIVE MAINTENANCE

STB0185 / STB0214NU-612 / 617 / 619

PREVENTATIVE MAINTENANCE CASTER INSPECTION

STB0185 / STB0214NU-612 / 617 / 619

PREVENTATIVE MAINTENANCE CASTER INSPECTION

STB0185NU-612/617

CASTER FAILURES

STB0185NU-612/617

CASTER FAILURES

STB0185 / STB0214NU-612 / 617 / 619

P.M.C.I.

STB0185 / STB0214NU-612 / 617 / 619

P.M.C.I.

STB0219 – NU-619CASTER MOUNTING UPGRADE

STB0219 – NU-619CASTER MOUNTING UPGRADE

New Spill Tray (Baffle) Airflows adjusted

Supply Lowered Exhaust Increased

Better containment Improved performance during

smoke test

NU-619NU-619

NU-677NU-677

The NU-677 replaced the NU-629 Equipped with pre-filtration to prevent hair,

dander and bedding materials from blocking filters – prop up work tray for easy cleaning

NU-677-400/500/600 NSF listed @ 12” access

NU-677NU-677

PHARMAGARDPHARMAGARD

PR-797 – Inspect outer door hinge bolts for wear during normal certification – replace as needed – STB0191

NuAire provides replacement bolts at No Charge – RF525 – keep some in your stock

NU-PR797NU-PR797

New Design Remove pressure switch The NO and COM contacts of the alar monitor are wired directly to

P27 contacts 1 and 2 of the main control board. The supply blower(s) will shut off when the pressure in the main chamber is higher than -.03” w.g. (when alarm monitor is in alarm condition.)

New Digital Manometer (Series 12)

NU-NR797 SERIES 11NU-NR797 SERIES 11

STB0160 – NU-797ISOLATOR CHART

STB0160 – NU-797ISOLATOR CHART

NU-797NU-797

PTB0170 TouchLink Software Loading Procedure STB0185 NU-612/617 Preventive Maintenance STB0187 Convert NU-425 Series 20^ to DC ECM Motor STB0192 TouchLink, Master Reset Procedure STB0197 GAF Control Board Usage/Calibration STB0201/202 GAF Module Software Update (RF541)

TECHNICAL BULLETINS / RF KITSTECHNICAL BULLETINS / RF KITS

STB0204 DC ECM Speed Control Replacement (425 type)

STB0211 TouchLink Software Version 61N.138N (Older) STB0214 Preventative Maintenance Check List STB0219 619 Caster Upgrade STB0230 Update Software Version 61.37 (Current) STB0248 Digital Velocity Sensor Replacement

TECHNICAL BULLETINS / RF KITSTECHNICAL BULLETINS / RF KITS

L ARGE G ROUP M ANUFACTURERS U PDATE

Documents

Transcript of L ARGE G ROUP M ANUFACTURERS U PDATE