L-14 Fluids [3]
description
Transcript of L-14 Fluids [3]
![Page 1: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/1.jpg)
L-14 Fluids [3]L-14 Fluids [3]Why things floatWhy things floatFluids in Motion Fluids in Motion Fluid Dynamics Fluid Dynamics
–HydrodynamicsHydrodynamics–AerodynamicsAerodynamics
![Page 2: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/2.jpg)
Buoyancy – why things float
• The trick is to keep the water on the outside of the ship, and
• to avoid hitting icebergs (which also float), and• are easy to miss since 90 % of it is submerged.
TITANIC
![Page 3: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/3.jpg)
![Page 4: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/4.jpg)
Buoyant Force
W
PTopA
PBottomA
submerged objectthat has a massdensity ρO
The density of thewater is ρW
hF = P A
Pressure increases with depth
![Page 5: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/5.jpg)
Archimedes’ Principle• PBottomA > PTopA
• A buoyant force FB equal to the weight of displaced water is exerted on a submerged object.
• The object sinks to the level where FB = W
WFB
![Page 6: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/6.jpg)
Archimedes principle The buoyant force on an object in
a fluid equals the weight of the fluid which it displaces.
– this works for objects in water– helium balloons (density of He = 0.18 kg/m3,
about 7 times less dense than air)– hot air balloons the density of hot air is lower than the density of cool air so the weight of the cool air that is displaced is higher than the weight of the balloon
![Page 7: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/7.jpg)
Will it float?• The buoyant force is always there whether the
object floats or not• The object will float if the buoyant force is
enough to support the object’s weight• The object will displace just enough water so
that the buoyant force = its weight• If it displaces as much water as possible and this
does not match its weight, it will sink.• Objects that have a density less than water will
always float- when fully submerged, they weigh less than the water, so the water supports them
![Page 8: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/8.jpg)
Floating objects
lighter object heavier object too heavy
The weight of displacedwater is less than theweight of the object
![Page 9: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/9.jpg)
Oil Tankers
emptytanker
fulltanker
![Page 10: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/10.jpg)
Floating in a cup of water
Only a thin layer ofwater around the hullis needed for the shipto float!
![Page 11: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/11.jpg)
Why does ice float?
• Water, the most plentiful substance on earth is also one of the most unusual in its behavior in that it expands when it freezes.
• Since it expands the density of ice is slightly less than the density of water (917 kg/ m3 as compared to 1000 kg/ m3 for water). So the part of the iceberg above the surface is less than 10% of the total volume.
![Page 12: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/12.jpg)
Place your bets!
When the ice cube melts will:1)the water spill out, or2)the water level stay the same, or3)the level go down ????????
Answer: The level stays the same.Ice is less dense than water, so thatthe volume occupied by the ice is exactly big enough to hold the volume of melted water that wasnot submerged!
ice cube
![Page 13: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/13.jpg)
Fluid Flow• The physics of fluid
flow was worked out by Daniel Bernoulli
• He was born in Switzerland in 1700
• He was one of 5 brothers and came from a large family of mathematicians and scientists.
![Page 14: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/14.jpg)
Pressure increases with depth, so the speed of water leakingfrom the bottom hole islarger than that from the higher ones.
fluid flow example – leaky cup
![Page 15: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/15.jpg)
How do we measure fluid flow?• We see how much comes out
in some time interval• Time how long it takes to fill the
bucket, say 30 seconds• the flow rate is then 1 bucket
say per 30 seconds• in other words volume per unit
time• gallons per min (gpm), liters/s,
cubic feet per min (cfm), gpf, or m3/s volume flow rate
![Page 16: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/16.jpg)
Volume flow rate
• If the water comes out of a tube of cross sectional area A with a flow speed u the volume flow rate is
• volume flow rate = u A (m/s m2)
• To measure u just see how long it takes to fill a gallon jug from a hose and measure the diameter of the hose.
m3/s
![Page 17: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/17.jpg)
Mass flow rate
• We could also measure how much mass comes out per unit time – kg/s for example
• if you are using a fluid of density coming out of a hose of cross sectional area A with speed v the mass flow rate is
• mass flow rate = u A
![Page 18: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/18.jpg)
What makes water flow?
• gravity• by placing the water
up high the pressure at the bottom is high enough to supply water to all parts of town that are lower than the tower
Stanton, IAMontgomery Co.
![Page 19: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/19.jpg)
Pressure differences
P2 P1
a pressure difference must be establishedacross the ends of the pipe to push the wateralong. P2 must be greater than P1
This pressure difference can be set up by a water pump.
![Page 20: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/20.jpg)
Water does not disappear!• If water goes in one end of a pipe it must
come out the other end (if there are no leaks of course. Sounds obvious, but it has a number of interesting consequences!
v1, A1 v2, A2
This applies to pipes that have constrictions also.
![Page 21: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/21.jpg)
Continuity of flow• since whatever goes in must come out we
have that the incoming flow rate – outgoing flow rate or
• v1 A1 = v2 A2
• thus the fluid in the narrow part of the tube must flow FASTER that the fluid on the left.
• Cardiologists use this to determine if arteries might be clogged.
![Page 22: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/22.jpg)
Other examples - the nozzle effect
• you use this principle whenever you hold your finger over the end of the hose to make the water spray farther.
![Page 23: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/23.jpg)
An amazing thing about moving fluids
• The pressure in a moving fluid is less than the pressure in a fluid at rest! this is Bernoulli's principle.
• Where a fluid moves faster its pressure is lower, where it moves slower, its pressure is higher.
• As we will see, this is the principle that makes airplanes work.
![Page 24: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/24.jpg)
The Venturi Meter
![Page 25: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/25.jpg)
windBernoulli appliesto householdplumbing too!
When the wind isreally blowing, watch the water level in thetoilet go up and down
air vent
sewer
roof
![Page 26: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/26.jpg)
![Page 27: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/27.jpg)
Prairie dogs know how to useBernoulli's principle
![Page 28: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/28.jpg)
“atomizers”
• fine droplets of liquid (not atoms) are sprayed from this device using the Bernoulli effect
![Page 29: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/29.jpg)
END HERE
![Page 30: L-14 Fluids [3]](https://reader035.fdocuments.in/reader035/viewer/2022062218/56816073550346895dcf9c45/html5/thumbnails/30.jpg)
Hot air balloon• The ideal gas law tells is
that when a gas is heated, its density goes down
• so the air density inside the balloon is less than the density of cold air on the outside.
• The cold air exerts an upward buoyant force on the balloon.