KVO Exhibit Bases - irp-cdn.multiscreensite.com€¦ · KVO’s NPS Exhibit Bases are constructed...

NPS exhibit bases were used for years as the standard for the National Park Service. Although a new standard has been recently adopted, these hand-some exhibit bases still stand the test of time. This system works great in any environment for a wide range of applications including wayfinding, infor-mation, orientation and interpretive signage. This system incorporates the use of aluminum extrusions that form the frame for the graphics panel, aluminum plate for support and a variety of aluminum tube sizes for the legs. The signs are shipped disassembled (for ease of shipping and to keep costs to a minimum) with all necessary hardware and complete instructions for installation. The graphic panel is typically 1/8” Digital High Pressure Laminate (DHPL) or Vitratek Porcelain Enamel, although virtually any sign material can be used in thicknesses ranging from flat to 5/32”. Although the NPS system is designed around a number of standard sizes, custom sizes are also available for an additional fee on a per job basis.

Product Guide

KVO Exhibit Bases

For more information about our Exhibit Bases or any of our other products or services please contact KVO Industries at: 4 Maxwell CourtSanta Rosa, CA 95401p: 707 573 6868f: 707 573 [email protected]

KVO’s NPS Exhibit Bases are constructed from durable aluminum and comes with a standard polyurethane textured paint finish in 4 standard colors (see chart below). For an additional fee, an optional powder coat finish is also available. The powder coat finish comes in 15 standard colors (see chart below). This system incorporates the use of aluminum extrusions that form the frame for the graphics panel, aluminum plate for support and a variety of aluminum tube sizes for the legs. There is a removeable angle on one side of the frame (usually at the top) which allows for insertion of the graphic panel. The angle is then attached with drive rivets, securing the graphics panel in position. The frame is then attached to the legs (when applicable) with another set of tamper-proof drive rivets.

The NPS system is designed around a number of standard sizes, although custom sizes and custom fabrication can be accommodated. Please contact KVO for pricing for standard or custom bases as there are a number of factors that dictate final cost such as style, material, finish, size and quantity. KVO Exhibit Bases are warranted for a period of one year from the date of delivery against defects in materials and workmanship. Note: You must have a written warranty from KVO Industries for your specific project before any claims can be honored.

KVO Exhibit Bases General Specs

page 2 © KVO Industries 2013

Standard Powder Coat Finish Colors

Colors represented in this chart should be used for reference only and may not accurately represent the actual color. Samples are available upon request. Custom color matching is also available for an additional fee.

Cardinal T032-BL04 Blue Texture Semi-Gloss

Cardinal T243-GR522 Flint Gray Fine Texture Semi-Gloss

Cardinal T028-GR02 Steel Gray Pearlescent 80% Gloss

Standard Polyurethane Paint Finish Colors

NPS Black

NPS Dark Brown

NPS Medium Gray

NPS Dark Green

Cardinal T241-BK59Black Texture Semi-Gloss

Cardinal T241-GR11 Platinum Gray Fine Texture Semi-Gloss

Cardinal T091-GR309 Mock Rock Texture Semi-Gloss

Cardinal T032-BR62Brown Fine Texture Semi-Gloss

Cardinal T243-GR301 Quartz Gray Fine Texture Semi-Gloss

Cardinal T091-GN57 Verdigris Texture Semi-Gloss

Cardinal T032-BG03Beige Texture Semi-Gloss

Cardinal T241-GR142 Light Gray Fine Texture Semi-Gloss

Cardinal T091-BR47 Rust Texture Semi-Gloss

Cardinal T032-WH15White Texture Semi-Gloss

Cardinal T025-BR01 Bronze Pearlescent 50% Gloss

Dupont GFG-600-W2 Spruce Wrinkle Semi-Gloss

© KVO Industries 2013

KVO Exhibit Bases Components

“F” Channel Extrusion: The F-Channel extrusion is welded into a frame which creates a channel for the graphic panel to slide into.

Backing Plate: 3/16” aluminum plate is welded to the F-Channel frame to provide support for the graphic panel.

Mounting Options: The standard mounting option is for in-ground installation. Detailed installation drawings are included with all orders. Additional mounting options are also available (see page 27).

Legs 3/16” wall aluminum tube in a variety of sizes depending on the model.

3/8” Button Head Tamper-Proof Drive Rivet Used to attach the frame to the legs (for applicable models).

Graphic Panel 1/8” DHPL or Vitratek Porcelain Enamel are KVO’s standard options for our NPS system but any sign material can be used.

Removeable Angle Allows for insertion of graphic panel.

1/4” Flat Head Tamper-Proof Drive Rivet Used to attach removeable angle to the frame, securing graphic panel in position.

KVO Exhibit Bases are identified by several simple designations: For demon-stration purposes we’ll use the following ID number: 3624 NPS TRAD/rail mount 3624 - for our NPS system, this number represents the exhibit (graphic panel) dimensions, width x height NPS - represents the sign system (in this case National Park Service) TRAD - represents the style (in this case Traditional) rail mount - anything after a forward slash represents an optional feature The following are all the designations you will find for the NPS system: Exhibit (graphic pane) Sizes: 1824 = 18” wide x 24” tall 2418 = 24” wide x 18” tall 3624 = 36” wide x 24” tall 4224 = 42” wide x 24” tall 2436 = 24” wide x 36” tall 3636 = 36” wide x 36” tall 3648 = 36” wide x 48” tall 4836 = 48” wide x 36” tall Sign Systems: SL = SlimLine OL = OutLine STL = Streamline STRL = Straightline NPS = National Park Service Styles: SLP = Single Leg Pedestal DLP = Double Leg Pedestal CAN = Cantilever TRAD = Traditional SUPR = Single (post) Upright DUPR = Double (post) Upright BC = Bulletin Case Options: surface mount sleeve mount sled mount rail mount wall mount double-sided custom

KVO Exhibit Bases Product Designations


Low Profile models


1824 NPS SLP (page 9)

2418 NPS SLP (page 10)

3624 NPS DLP (page 11)

4224 NPS DLP (page 12)

3624 NPS CAN (page 13)

4224 NPS CAN (page 14)

3624 NPS TRAD (page 15)

4224 NPS TRAD (page 16)

Single Leg Upright models


1824 NPS SUPR (page 17)



Double Leg Upright models


2436 NPS DUPR (page 20)





Bulletin Case models


2436 NPS BC (page 25)

3648 NPS BC (page 26)

1824 NPS SLP 18.5” x 24.5” 18” x 24” 17” x 23” aluminum textured polyurethane paint (standard) powder coat (optional)

Product ID: Frame dimensions:

Graphic panel dimensions: Visible opening:

Construction: Finish:

Product Specifications


scale: 3/4" = 1' ELEVATION VIEW scale: 3/4" = 1' SIDE VIEW

32.00" (for A.D.A. compliance)

24.50

"

1.75"

20.00"

gravel

2" backfill

concrete

rebar (recommended - not provided)

45 degree angle

4.00" 4.00"

17.00"

18.50"

24.50" 23.00"

Single Leg Pedestal (SLP)

2418 NPS SLP 24.5” x 18.5” 24” x 18” 23” x 17” aluminum textured polyurethane paint (standard) powder coat (optional)








1.75"

20.00"

gravel

2" backfill

concrete


18.50

"

45 degree angle

4.00" 4.00"

23.00"

24.50"

18.50" 17.00"

Single Leg Pedestal (SLP)

3624 NPS DLP 36.5” x 24.5” 36” x 24” 35” x 23” aluminum textured polyurethane paint (standard) powder coat (optional)








24.50

"

1.75"

20.00"

2.00"

gravel

2" backfill

concrete


45 degree angle

4.00"

35.00"

36.50"

24.50" 23.00"

28.50"

Double Leg Pedestal (DLP)

4224 NPS DLP 42.5” x 24.5” 42” x 24” 41” x 23” aluminum textured polyurethane paint (standard) powder coat (optional)








45 degree angle

24.50

"

1.75"

20.00"

2.00"

gravel

2" backfill

concrete


4.00"

41.00"

42.50"

24.50" 23.00"

34.50"

Double Leg Pedestal (DLP)

3624 NPS CAN 36.5” x 24.5” 36” x 24” 35” x 23” aluminum textured polyurethane paint (standard) powder coat (optional)








20.00"

gravel

2" backfill

concrete


25.00

"

2.00"

45 degree angle

4.00"

35.00"

36.50"

24.50" 23.00"

Cantilever (CAN)

4224 NPS CAN 42.5” x 24.5” 42” x 24” 41” x 23” aluminum textured polyurethane paint (standard) powder coat (optional)








20.00"

gravel

2" backfill

concrete


25.00

"

45 degree angle

4.00" 2.00"

41.00"

42.50"

24.50" 23.00"

Cantilever (CAN)

3624 NPS TRAD 36.5” x 24.5” 36” x 24” 35” x 23” aluminum textured polyurethane paint (standard) powder coat (optional)








35.00"

36.50"

20.00"

gravel

2" backfill

concrete


45 degree angle 26

.75"

24.50

"

1.75"

4.00"

6.00" 2.00"

24.50" 23.00"

Traditional (TRAD)

4224 NPS TRAD 42.5” x 24.5” 42” x 24” 41” x 23” aluminum textured polyurethane paint (standard) powder coat (optional)








20.00"

gravel

2" backfill

concrete


45 degrees 26

.75"

24.50

"

1.75"

4.00"

6.00"

41.00"

42.50"

24.50" 23.00"

2.00"

Traditional (TRAD)

1824 NPS SUPR 18.5” x 24.5” 18” x 24” 17” x 23” aluminum textured polyurethane paint (standard) powder coat (optional)







72.00"

24.00"

1.75"

gravel

2" backfill

concrete


24.50" 23.00"

18.50" 17.00"

4.00" 2.00"

Single Leg Upright (SUPR)








72.00"

24.00"

1.75"

gravel

2" backfill

concrete


18.50" 17.00"

24.50" 23.00"

4.00" 2.00"









72.00"

24.00"

1.75"

gravel

2" backfill

concrete


36.50" 35.00"

24.50" 23.00"

4.00" 2.00"


2436 NPS DUPR 24.5” x 36.5” 24” x 36” 23” x 35” aluminum textured polyurethane paint (standard) powder coat (optional)







2.50"

gravel

2" backfill

concrete


72.00"

24.00"

1.75"

5.50"

24.50" 23.00"

36.50" 35.00"

Double Leg Upright (DUPR)








2.50"

gravel

2" backfill

concrete


72.00"

24.00"

1.75"

5.50"

36.50" 35.00"

24.50" 23.00"









2.50"

gravel

2" backfill

concrete


72.00"

24.00"

1.75"

5.50"

36.50" 35.00"

36.50" 35.00"









2.50"

gravel

2" backfill

concrete


72.00"

24.00"

1.75" 36.50" 35.00"

48.50" 47.00"

5.50"









2.50"

gravel

2" backfill

concrete


72.00"

24.00"

1.75"

36.50" 35.00"

48.50" 47.00"

5.50"


2436 NPS BC 24.5” x 36.5” 19.5” x 31.5” aluminum textured polyurethane paint (standard) powder coat (optional)


Visible opening: Construction:

Finish:




72.00"

24.00"

2.25"

2.50"

gravel

2" backfill

concrete


24.50" 19.50"

36.50" 31.50"

5.50"

Bulletin Case (BC)

3648 NPS BC 36.5” x 48.5” 31.5” x 43.5” aluminum textured polyurethane paint (standard) powder coat (optional)


Visible opening: Construction:

Finish:




72.00"

24.00"

2.25"

2.50"

gravel

2" backfill

concrete


36.50" 31.50"

48.50" 43.50"

5.50"

Bulletin Case (BC)

Surface Mount (additional detail on page 29) A clean and simple solution for mounting any of our standard bases to virtually any surface. The mounting plate attaches to the surface with standard hardware. The cover then mounts with small security screws over the plate to conceal the hardware.

Double Sided

The Single Upright (SUPR) and Double Upright (DUPR) exhibit bases in our NPS series can be easily converted to create double-sided signs, perfect for information and wayfinding systems that can be viewed from either side.


Rail Mount With simple modifications, KVO Exhibit Bases can mount to most railings. The version in this illustration utilizes our surface mount option although numerous custom installation ideas are possible.

KVO Exhibit Bases Mounting Options

Sleeve Mount In certain situations, the exhibit base may need to be removed from time to time. With the addition of simple sleeves, this can easily be accomplished.

Wall Mount With simple brackets, our standard frame and bulletin units can easily mount to any wall with the appropriate hardware.

Sled Mount This option works well for situations where the exhibit needs to move to various locations.

Upright Clusters Many of the NPS Upright and Bulletin Case models can be configured in a variety of “clusters”. A 3-sided cluster is shown to the right and a triple offset cluster is illustrated below. The table to the far right depicts the various cluster configurations available. Contact a KVO representative for more details.


Upright Clusters Mounting Options

Mounting Options

Double Inline

Triple Inline

Double Offset

Triple Offset

3-sided

4-sided

KVO Exhibit Bases Surface Mount Detail


9.50" 9.50"

1.50"

7.00" 9.00"

7.00" 9.00"

The most popular mounting option for our NPS Exhibit Bases is the surface mount. The advantage of the surface mount option over the standard in-ground method is the ability to remove the exhibit base for maintenance or to move to a different location.

This option include a base plate welded to the leg(s) with a cover that attaches to the base plate with security screws. The cover neatly conceals the mounting hardware and provides additional security.

Please note: Although KVO Industries does not typically provide the hardware for attaching the base plate to the concrete or deck surface, concrete anchors and / or lag bolts are available upon request.

KVO Exhibit Bases - irp-cdn.multiscreensite.com€¦ · KVO’s NPS Exhibit Bases are constructed...

Documents

Transcript of KVO Exhibit Bases - irp-cdn.multiscreensite.com€¦ · KVO’s NPS Exhibit Bases are constructed...