Kverneland Taarup Horizontal Auger Diet Feeders

Product Information 2012

Range overview Different Material2 Auger System Weighing System Even Distribution

43

>> Exit

1 2 5

Range overviewModel 608 610 612 614 616 618

´Capacity (m3) 8 10 12 14 16 18

Loading capacity (kg) 3500 4400 5200 6100 7200 8000

Empty weight (kg) 3500 3600 4600 4700 5300 5400

Overall height

12.50/80x15.3 tyres (m)

2,42 2,69 - - - -

315/80xR22.5 tyres (m)

- - 2,50 2,78 - -

40x14 tyres (m) - - 2,44 2,71 2,64 2,83

15xR22.5x18 ply tyres (m)

- - - - 2,70 2,88

Overall length (m) 5,16 5,16 6,16 6,16 7,16 7,16

Overall width (m) 2,10 2,10 2,10 2,10 2,10 2,10

Overall with over tyres (m)

2,01 2,01 2,01 2,01 2,13 2,13

Two Auger SystemHorizontal Auger Diet Feeders

Kverneland Load Capacity Load Weight Power Req.

608 8m³ 3500 kg 55/60 kW/hp

610 10m³ 4400 kg 55/60 kW/hp

612 12m³ 4600 kg 60/80 kW/hp

614 14m³ 4700 kg 60/80 kW/hp

616 16m³ 5300 Kg 70/95 kW/hp

618 18m³ 5400 kg 70/95 kW/hp

Kverneland 608-610-612-614-616-618

Brochure

Overview

Robust Auger Drive

- Simple chain & sprocket transmission for long life & simple maintenance

- All chains and sprockets are situated in an oil bath, providing continuous lubrication

- Easy access to the complete drive mechanism

The Two Auger System

The two contra-rotating augers ensure fast incorporation of long or baled material with other components

The auger- shear bar combination permits the fast incorporation of baled or long material, ensuring mixing time is as short as possible

The shear bar

The Knives

For a more aggressive cutting action

- additional knives can be fitted to the augers as necessary

The two augers are fitted with replaceable circular cutting knives with a multiple of useable

cutting edges

The Mixing ChamberThe lower part of the mixing chamber features a unique design of corrosion resistant Cor-Ten steel overlaid with Ultra-Glide plastic liners

- Cor-Ten prevents rusting of the lower mixing chamber

- Ultra-Glide plastic is unaffected by moisture & acid, while helping to reduce friction & power required during mixing. Ultra-Glide plastic can be replaced quickly & at relatively low cost.

Weighing SystemHorizontal Auger Diet Feeders

Full Control During Loading

Kverneland 600 series offer a highly accurate weighing system - the Kverneland TMRscale

Weighing and Sensor

The Weighing System

The 3 heavy duty weigh bars ensure long life and accuracy - an essential consideration when formulating

feed rations

Full Control During Loading

The easy to read display is mounted on a rotating arm that can be mounted either side of the machine and viewed during the loading and discharge operations

The Kverneland TMRscale

The Kverneland TMRscale is available in 3 formats:• 401 - simple up/down weigh scale• 402 - simple up/down weigh scale with remote control unit for all functions (excluding system on/off)• 403 - fully programmable weigh scale for multiple recipes with multiple components

The Remote Control

With the optional remote control (model TMRscale 402) the scale is easily reset from the loader between each feed component - ideal for loading and feeding by 1 person

Different MaterialHorizontal Auger Diet Feeders

Easy and Convenient Incorporation of All Material

The Kverneland 600 series is specifically designed to incorporate all feed formats into the ration without the

need for pre-chopping

Incorporation of All Material

Round bales

Square bales

Loose clamp material

Concentrates

Incorporation of All Material

Fast Incorporation of Even Two Bales

The combination of the two contra-rotating augers and the shear bar offers the possibility to cut & mix all material types in all formats

- even 2 bales at the same time!

Fast Cutting & Mixing Action

Adding Minerals

Small amount of minerals and concentrates can be introduced into the ration via the loading grill at the

rear.

Even DistributionHorizontal Auger Diet Feeders

Even Distribution

All machines are prepared for distribution to 1 or 2 sides - discharge to left or right side independently or even simultaneously

– Discharge options include simple discharge chute …..

– ….. or PVC discharge conveyor in lengths from 0,65 to 2m

Even Distribution

Conveyor Belt

The silent-running ribbed conveyor belt ensures precise and even distribution

Conveyor Belt

The conveyor systems offer flexibility for discharge onto the floor, over feed barriers or into troughs.

Discharge height is controlled by the hydraulic lift cylinder

Fixed Discharge Chute

The fixed discharge chute is an ideal solution for low cost discharge or

when operating in narrow cow sheds

Two Doors for More Efficient Feeding

If necessary the Kverneland 600 series can be supplied with two doors for simultaneous distribution on left and right side

in one pass

Door Position Indicator

An easily visible graduated indicator at the front of the machine informs the driver regarding the discharge

door position

2 contra-rotating augers & circular knives with multiple

cutting edges – flexibility to cut and mix with the same

machine

1

Fully modular & adjustable central shear bar for cutting &

mixing all feed materials

2

Precise weighing system with remote control options for very easy operation

3

Multiple discharge options to suit the feeding method of

each farm

4

The 4 Arguments - 600 Series