KV401A-KV403A
-
Upload
olivinabauer -
Category
Documents
-
view
11 -
download
0
Transcript of KV401A-KV403A
-
1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746
Copyright 2004. Black Box Corporation. All rights reserved.
-
OCTOBER 2004KV401AKV402AKV403A
ServSwitch Micro
CUSTOMER SUPPORT INFORMATIONOrder toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018Web site: www.blackbox.com E-mail: [email protected]
1 2
-
1FCC AND IC RFI STATEMENTS
FEDERAL COMMUNICATIONS COMMISSIONAND
INDUSTRY CANADARADIO FREQUENCY INTERFERENCE STATEMENTS
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, thatis, in strict accordance with the manufacturers instructions,may cause interference to radio communication. It has beentested and found to comply with the limits for a Class Acomputing device in accordance with the specifications inSubpart B of Part 15 of FCC rules, which are designed toprovide reasonable protection against such interference whenthe equipment is operated in a commercial environment.Operation of this equipment in a residential area is likely tocause interference, in which case the user at his own expensewill be required to take whatever measures may be necessaryto correct the interference.
Changes or modifications not expressly approved by the partyresponsible for compliance could void the users authority tooperate the equipment.
-
2SERVSWITCH MICRO
This digital apparatus does not exceed the Class A limits for radionoise emission from digital apparatus set out in the Radio InterferenceRegulation of Industry Canada.
Le prsent appareil numrique nmet pas de bruits radiolectriquesdpassant les limites applicables aux appareils numriques de classe A prescrites dans le Rglement sur le brouillage radiolectrique publi par Industrie Canada.
TRADEMARKS USED IN THIS MANUAL
ServSwitch is a trademark of Black BoxCorporation.
PS/2 is a registered trademark ofInternational Business MachinesCorporation.
Linux is a registered trademark of LinusTorvalds.
Windows and Windows NT are eitherregistered trademarks or trademarks ofMicrosoft Corporation in the United Statesand/or other countries.Any other trademarks mentioned in this manualare acknowledged to be the property of thetrademark owners.
-
3CONTENTS
ContentsChapter Page
1. Specifications . . . . . . . . . . . . . . . . . . . 4
2. Overview . . . . . . . . . . . . . . . . . . . . . . . 7
3. Installation . . . . . . . . . . . . . . . . . . . . . 8
4. Operation . . . . . . . . . . . . . . . . . . . . . 114.1 LED Indicators . . . . . . . . . . . . . 114.2 Hotkey Commands . . . . . . . . . . 11
5. Troubleshooting. . . . . . . . . . . . . . . . 13
-
4SERVSWITCH MICRO
1. SpecificationsVideo Resolution: 1920 x 1440 DDC,DDC2, and DDC2B
Scan Interval: 3, 8, 15, and 30 seconds
Cable Length to Computer: 6 ft. (1.8 m)
Software Requirements: Windows
95/98/Me/XP, Windows 2000, WindowsNT, or Linux
Connectors: User end: KV401AKV403A:(1) HD15 for connection to shared monitor, (2) 6-pin mini-DIN for connection to shared keyboard and mouse;
-
5CHAPTER 1: Specifications
Connectors (continued): Computer end: KV401A: (2) HD15 and
(4) 6-pin mini-DIN for connection to two PS/2 monitors, keyboards, and mice;
KV402A: (2) HD15 for monitor port, (2) USB Type A for keyboard and mouse ports;
KV403A: (2) HD15 for monitor port,(1) USB Type A for keyboard and mouse ports, (2) 6-pin mini-DIN for keyboard and mouse ports
Indicators: (2) Yellow status LEDs
Temperature Tolerance: 41 to 104F(5 to 40C)
Relative Humidity: Up to 80%
-
6SERVSWITCH MICRO
Power: From the interface
Size: 1.9"H x 2.4"W x 0.8"D(4.8 x 6.1 x 2 cm)
Weight: 0.6 lb. (0.3 kg)
-
7CHAPTER 2: Overview
2. OverviewUse the ServSwitch Micro to access twocomputers from a single shared monitor,keyboard, and mouse. Two high-quality,6-ft. (1.8-m) integral coaxial cables providethe connections to the two computers.
Three models are available. They vary onlyin the number and type of connectors. Seethe Connectors specification in Chapter 1.
All models are plug and play and can becomputer selected for easy setup andinstallation. They also have two status LEDsand advanced video enhancementtechnology for crisp, clear VGA quality upto 1920 x 1440. Computer switching isflawless, and PC startup is trouble-free.
-
8SERVSWITCH MICRO
3. InstallationFigure 3-1 shows a typical application.Follow the instructions on the next twopages to install the ServSwitch Micro.
Figure 3-1. The ServSwitch Micros cable connections.
ServSwitch Micro(KV401A)
PS/2
Mouse
Monitor
Keyboard
6-ft. (1.8-m)pigtail cable
(1) HD15 and(2) 6-pin mini-DIN
connectors
(1) HD15 and(2) 6-pin mini-DIN
connectors
(1) HD15 and(2) 6-pin mini-DIN
connectors
PS/2
-
9CHAPTER 3: Installation
1. Power off both computers.
2. Connect, in order, the mouseconnector, keyboard connector, andmonitor connector to one compu-ters respective ports. Start byattaching the 6-pin mini-DINconnectors to the computerskeyboard and mouse ports. (Themini-DIN connectors are color-coded; mate the connectors with thesame color. The purple connectorattaches to the keyboard and thegreen connector attaches to themouse.)
Next, attach the adjoining HD15connector to the computers HD15video port.
-
10
SERVSWITCH MICRO
3. Repeat step 2, only this time connectthe ServSwitch Micro to the secondcomputer.
4. Connect your keyboard, mouse, andVGA monitor to the two 6-pin mini-DIN connectors and one HD15connector on the ServSwitch Microsuser end.
-
11
CHAPTER 4: Operation
4. Operation 4.1 LED Indicators
Two LEDs indicate the ServSwitch Microsstatus. When the LED is lit, the computerconnected to the associated port is active.In AutoScan mode, the keyboards ScrollLock should be flashing.
4.2 Hotkey Commands
The ServSwitch Micro selects computersusing hotkey commands. These aresummarized in Table 4-1.
-
12
SERVSWITCH MICRO
Table 4-1. Hotkey command summary.
Key Sequence Function
left left Selects computer 1
left left Selects computer 2
left left Initiates AutoScan
left left Aborts AutoScan
left left Toggles computer selection
left left Toggles AutoScan intervals. Toselect the AutoScan interval,press and release the Ctrl keytwice, then press the F3 keyrepeatedly to toggle through thesettings: 3, 8, 15, or 30 seconds.
left left Resyncs the mouseF12CTRLCTRL
F3CTRLCTRL
F2CTRLCTRL
CTRLCTRL
F1CTRLCTRL
2CTRLCTRL
1CTRLCTRL
-
13
CHAPTER 5: Troubleshooting
5. TroubleshootingTable 5-1. Problems/Causes/Solutions.
Problem Cause Solution
The mouse does Improper 1. Unplug the not work. initialization. mouse, then plug
it back into theServSwitch Micro.
2. Press the leftCtrl key twice, followed by the F12key to resync the mouse.
The ServSwitch The ServSwitch You can still usekeeps switching is in AutoScan the selectedbetween compu- mode. computer duringters. The Scroll AutoScan mode.Lock LED is To abort Autoflashing. Scan mode,
press the leftCtrl key twice.
-
14
SERVSWITCH MICRO
Table 5-1 (continued). Problems/Causes/Solutions.
Problem Cause Solution
Both LEDs are Both computers Turn on at leastoff. are off. one computer.
There is a Make sure that bad connection. both connections
are secure.
One LED is on At least one This is not a while both computer has problem. You can computers are off. keyboard power- still use the compu-
up ability. ters keyboard power-up feature.
AutoScan mode One or both Power on bothdoes not work. computers is (are) computers.
powered off.
The AutoScan AutoScan resets Use a hotkeyinterval has to a default of command (seechanged since its three seconds Table 4-1) to setlast use. when both the interval to
computers are 8, 15, or 30 powered off. seconds.
I need to connect The ServSwitch Replace thea serial mouse. does not work with computer with
serial mice. one that has aPS/2 or USBmouse.