Kuryakyn Metric Junior 2010 catalog
-
Upload
mag-europe -
Category
Documents
-
view
228 -
download
0
description
Transcript of Kuryakyn Metric Junior 2010 catalog
ACCESSORIES FOR
Ou
r
Ne
we
st
&
G
re
at
es
t
Pr
od
uc
ts
2010GoldWing • sport bike METRIC
touringLuggage ...................................pg 78Saddlebags .............................. pg 84Backrests & Racks .................. pg 86Air Management ...................... pg 87
performanceAir Cleaner Accessories ...........pg 90Air Cleaners ............................ pg 91
the shopGeneral Accessories .................pg 92
inDeX .................................... pg 94
golDwingFront End .................................pg 05Mid-Frame ............................... pg 10Cockpit ..................................... pg 11Grips/Handlebars/Accessories pg 12Touring Comfort ...................... pg 15Footpegs & Boards ................... pg 18Rear End .................................. pg 21Touring Accessories .................pg 24
can-am ................................. pg 26
sport bikeGrips ........................................pg 28Grip & Handlebar Accessories ..pg 29Mirrors .....................................pg 30Pegs ......................................... pg 31Chrome ....................................pg 32
lightingDriving Lights ...........................pg 35Silver Bullets ........................... pg 37Taillights & Turn Signals ..........pg 38R-T-B Controllers .....................pg 40Accent Lights ........................... pg 41
hanDlebarsGrips & Accessories .................pg 43Levers ..................................... pg 46Control Covers ......................... pg 47Handlebar Accessories ............ pg 48Mirrors ..................................... pg 51
footrestsFootpegs & Peg Adapters .........pg 54Floorboards ............................. pg 57Splined Adapters ..................... pg 58Floorboard Covers .................... pg 59Brake Pedal Pads .....................pg 60Cruise Pegs .............................. pg 62Engine Guards ......................... pg 65Passenger Comfort ..................pg 66Male Mount Pegs ...................... pg 67
chromeFront End .................................pg 68Engine ..................................... pg 70Rear End ..................................pg 73License Plates ......................... pg 76
w h a t ’ s i n s i D e
See your Local DealershipFind Your Dealership at:
www.kuryakyn.com call us at: 715-247-2184
t o p l a c e a n o r d e r
or
TEChnICAl SuppORT CEnTER: Our professional technical staff is your source for the right answers. They’re expert troubleshooters & have vast
experience installing our products the way they were designed to fit & work. When the going gets tough, the
tough call our Tech Department at 1-866-277-9598. We’ll have you back on the road in no time!
CuSTOMER CARE CEnTER: Our Sales Support/Customer Care staff is the best in the business. Help with selecting the right part, checking on orders, returns, problem resolution, & general product information is just a phone call away. World class support for world class product is yours at 1-866-277-9598.
b i k e m a p s
BackreSTS & SiSSy BarS 86-87
lower BelT guard cover
74
VTX1300
Road StaRat-a-GLaNCE
at-a-GLaNCE
BackreSTS & SiSSy BarS
86-87
driver BackreST
87
Boomerang coverS
74
Swingarm coverS
74
driving lighT Bar
36Performance air cleanerS
90-91
BackreST mounTing STraPS
86
floorBoard coverS
59
adjuSTaBle cruiSe Peg mounTS
62
TaPPeT Block coverS
72
licenSe PlaTe frameS & mounTS
39,76-77
PaSSenger Peg, mounTS & floorBoardS
52-58,66
griP & handleBar acceSSorieS
42-51
griP & handleBar acceSSorieS
42-51
Performance air cleanerS 90-91
driving lighTS 35-36
lower fork SkinS 68
engine guard 65
caliPer coverS 68-69
engine caSe coverS 70-71
mid frame coverS online
BackreST mounTing STraPS 86
licenSe PlaTe frameS & mounTS
76-77
frame Trim 73
drive ShafT cover 73
drive huB ToP cover 73
driver PegS & floorBoardS 52-58
driver cruiSe PegS (noT Shown) 62-65
PaSSenger PegS & floorBoardS 52-58,66
w w w . k u r y a k y n . c o m 1
b i k e m a p s
SuB fender licenSe PlaTe BrackeT
76
fender TiPS (noT Shown)
69
mirrorS
51-52
griPS
42-43
leverS 46
reflecTor coverS
online
fronT caliPer coverS (noT Shown)
69
ShifT & Brake coverS
60-61
ShifT rodS (noT Shown)
online
driver PegS & floorBoardS
52-58
driver cruiSe PegS (noT Shown)
62-65
clear Turn Signal lenSeS (noT Shown)
41
chrome fork ProTecTor coverS (noT Shown)
online
Swingarm axle adjuSTer cover
75
ToP BelT guard
75
maSTer cylinder cover(noT Shown)
46
Boomerang frame cover
75
PaSSenger PegS & floorBoardS
52-58,66
Themed medallionS(noT Shown)
69
driving lighTS (noT Shown)
35-36
griP & handleBar acceSSorieS (noT Shown)
42-51
RaidERat-a-GLaNCE
8 7 7 . 3 7 0 . 3 6 0 42
b i k e m a p s
TricePTor fender TiPS (noT Shown)
69
frame mounTed driving lighTS (noT Shown)
35
engine caSe coverS
70-71engine coverS inSerTS
70PaSSenger PegS &
floorBoardS
52-58,66
PaSSenger cruiSe PegS (noT Shown)
66
licenSe PlaTe frame
76-77
rear maSTer cylinder cover (noT Shown)
62-65
driver PegS & floorBoardS
52-58
driver cruiSe PegS (noT Shown)
online
mirrorS
51-52
griPS
42-43
leverS 46
Turn Signal BezelS
40
Turn Signal BezelS
40
handleBar conTrol coverS
46-47
FuRyat-a-GLaNCE
w w w . k u r y a k y n . c o m 3
b i k e m a p s
GoLdwiNGat-a-GLaNCE
lighTed windShield Trim
7
handleBar acceSSorieS
12
chrome Tank Trim wiTh knee PadS
11
chrome cockPiT coverS
11
handleBar ToP coverS (noT Shown)
11
fronT SPeaker ToP Trim 11
fronT fender TiP
5
inTake venT inSerTS
7
roTor coverS & l.e.d. ring of fire
6
lighTed fork Tower accenT
6aero head
marker lighT online
cowl driving lighTS (noT Shown) & lower cowl chrome cover
8driver floorBoardS
18
TranSformer floorBoardS
19
lighTning valve coverS
8
fairing lighT ii
9
Premier Shark gillS wiTh radiaTor
venT Trim
9
Boomerang frame coverS
10
louvered chrome BaTTery Box coverS
10
highway PegS & BoardS
20chrome SaddleBag fronT
Scuff ProTecTerS
10
lighTed SaddleBag molding
22
SaddleBag SPoilerS
21
Trunk key hole Trim
(noT Shown)
21
lighTed Trunk
molding
23
SPoiler end Trim
21
SPoiler w/l.e.d. r-T-B lighTBar
(noT Shown)
21
l.e.d. frame accenT lighTing
10
rear wheel ring of fire
6
rear SPeaker Trim (noT Shown)
11PaSSenger armreSTS
17
SeaTS & BackreSTS (heaTed & unheaTed)
17
PaSSenger drink holder
16
SaddleBag BoTTom Trim
molding
22
luggage rack & riSerS
24 rear airfoil
15
iSo-griPS for heaTed griPS
12
cluTch & Brake leverS
12
8 7 7 . 3 7 0 . 3 6 0 48 7 7 . 3 7 0 . 3 6 0 44
go
ld
win
g
ShaRk tooth FENdER aCCENtS for GL1800
These little beauties add that finishing touch to
the empty holes on the front fender.
Fits: ‘01-’10 GL1800 Models
7320 Shark Tooth Fender Accents (pr)
$49.99
FRoNt FENdER tip for GL1800
Combine beauty & protection! With easy, peel-&-
stick installation - it’s also the perfect cover up for
existing little chips.
Fits: ‘01-’10 GL1800 Models
7321 Front Fender Tip (ea) $31.997321
7303
7320
FRoNt FENdER ExtENSioN for GL1800
A must-have item, this will really tame the road spray when riding in the rain. Extending
the fender four inches & made of sparkling chrome & black rubber, it is easy to install on
stock front fenders, or those with the Honda extension previously installed.
Fits: ’01-’10 GL1800 Models
7352 Front Fender Extension for GL1800 (ea) $69.99
Front End | pg 05
Mid-Frame | pg 10
Cockpit | pg 11
Grips & Accessories | pg 12
Handlebar Accessories | pg 13
Touring Comfort | pg 15
Footpegs & Boards | pg 18
Rear End | pg 21
Touring Accessories | pg 24
FoRk bRaCE & ChRomE duSt CovERS for GL1800
Superior in function, this is the only brace on the market that provides the
perfect fit & allows for those little variations found from bike
to bike. Add these chrome dust cover beauties for that added
protection to your fork tubes & you have obtained the perfect
match of function & style.
Fits: ’01-’10 GL1800 (except Airbag Models)
8615 Fork Brace for GL1800 (ea) $259.99
8636 Chrome Fork Dust Covers for GL1800 (pr) $51.99
8637 Fork Brace with Dust Cover for GL1800 (set) $299.99
f r o n t e n d
w w w . k u r y a k y n . c o m 5
l.e.d. front reflector conversion for GL1800
Replace the ho-hum amber reflectors on your lower forks with an array of amber
L.E.D.’s! These are both running lights & turn signals for added visibility.
Fits: ’01-’10 GL1800 Models (‘06-’10 GL1800’s require P/N 7300 for plug-&-play
installation)
7455 L.E.D. Front Reflector Conversion (pr) $59.99
LiGhtEd FoRk towER aCCENtS for GL1800
Add visibility with class. The three spear towers are
filled with L.E.D. running lights with the top spear doubling
as a turn signal accent.
Fits: ‘01-’10 GL1800 Models (except Airbag Models) (‘06-’10 GL1800’s require P/N 7300 for
plug-&-play installation)
7445 Lighted Fork Tower Accents for GL1800 (pr) $179.99
Chrome Rotor Covers with L.E.D. Ring of Fire Fits: ’01-’10 GL1800 (except Airbag Models)
7451 Amber Out/Amber In Ring of Fire (pr) $270.99
7454 Amber Out/Red & Blue In Ring of Fire (pr) $299.99
Chrome Rotor Covers Fits: ’01-’10 GL1800 (except Airbag Models)
7450 Chrome Rotor Covers (pr) $124.99
L.E.D. Ring of Fire A vibrant amber shine outward with multiple color options shining inward. Fits: ’01-’10 GL1800 Models (Installs on Küryakyn or Honda Rotor Covers)
7390 Amber Light Shining Inward (pr) $145.99
7391 Blue Light Shining Inward (pr) $179.99
7392 Blue & Green Light Shining Inward (pr) $179.99
7393 Red & Blue Light Shining Inward (pr) $179.99
rear wheel ring of f ire for GL1800
We see your love for the “glow” from the front
wheel Ring of Fire; now cast that same glow out
from under your saddlebags. With Red/Red lighting,
let the light shine.
Fits: ’01-’10 GL1800 Models
7395 Rear Wheel Ring of Fire (ea) $145.99
adapter plug for Front Turn Signal Accents
Enable yourself to plug-&-play Küryakyn front turn signal
accents into your ‘06-’10 GL1800. Required with Fairing Light II
(P/N 7315 & 7316), Aero Head Marker Light (P/N 7458), L.E.D. Front
Reflector Conversion (P/N 7455), Lighted Fork Tower Accents (P/N 7445),
Amber Fairing Accent Lights (P/N 4628), & Windshield Trim ( P/N 1367).
7300 Required for Plug-&-Play Installation on ’06-’10 GL1800 (pr)
$20.99
Note: Typically only one pair required for multiple accessories.
7450
7392
ChRomE RotoR CovERS & L.E.d. RiNG oF FiREtm for GL1800
Really take center stage with your GL1800.
Beautiful Chrome Rotor Covers conceal your
axel, hub & rotors into smooth elegance.
Combine with the L.E.D. Ring of Fire &
set the night ablaze with brilliant
amber shining outward & select
your desired colors shining
inwards to dance dazzling
lights off your rim. Rotor
Covers available separately if
you prefer & you can add the
Ring of Fire in the future.
8 7 7 . 3 7 0 . 3 6 0 4
B
B
c
c
a
a
6
ChRomE GRiLL for GL1800U.S. Patent D596,995
This Chrome Grill appears to be the
chromed air intake for a pavement gobbling monster. Choose lit or
unlit, the amber L.E.D. running lights really look sharp for that screaming hot
performance. No one needs to know it provides visual horsepower only.
Fits: All ’01-’10 GL1800 Models
7327 Chrome Grill (ea) $59.99
7328 Amber L.E.D. Lighted Grill (ea) $119.99Note: Will not work with Sport/Touring Lamp Kit (P/N 2218).
fairing scoop trim for GL1800 U.S. Patent D575,200 & D582,818
Add sophistication & class with this easily installed scoop trim. Render
the crowds speechless when you combine with our Chrome Eyebrows for
a spectacular look.
Fits: ’01-’10 GL1800 Models
7322 Fairing Scoop Trim (ea) $32.99
chrome eyebrowstm for GL1800
U.S. Patent D575,199
Our 3 dimensional Chrome Eyebrows close that unsightly gap between
your headlamps & fairing. Adding a little touch
of elegance to your fairing couldn’t be easier.
Fits: ’01-’10 GL1800 Models
7323 Chrome Eyebrows (pr) $49.99
bear claw mirror accent for GL1800
Wrap the top of your mirrors with these daring chrome accents. Looking
great from the driver’s position & will dazzle others as you pass them by.
Fits: ‘01-’10 GL1800 Models
7324 Bear Claw Mirror Accent (pr) $59.99
wiNdShiELd tRim with Turn Signal Accents for GL1800
You appreciate ooo’s & ahh’s from onlookers, so fully amaze the crowd. A huge improvement over the plain
black rubber it conceals - a pristine chrome finish punctuated with crisp L.E.D. running lights/turn signal
accents. The result is a clean transition from the windshield to the fairing & increased visibility.
Fits: All ’01-’10 GL1800 Models (’06-’10 GL1800’s require P/N 7300 for plug-&-play installation)
1367 Windshield Trim with Turn Signals (ea) $199.99
fairing intake vent inserts for GL1800
Transform the plain-jane “black hole” fairing
air intake vents with stylish chrome inserts.
Fits: ’01-’10 GL1800 Models
3900 Fairing Intake Vent Inserts (pr) $34.99
B
c
d
e
f
a
SkiNNi miNitm ultra bright strip lights
Don’t be fooled by their size - These minis pack quite a punch! Wrap your headlights or accent whatever you desire with these
cut-to-length lights. Hypnotizing!
coming
soon!
w w w . k u r y a k y n . c o m
a
cd
e f
B
Built-in Turn
Signal accents!
7
chrome timing chain cover set for GL1800 U.S. Patent D525,268
Chrome the entire timing chain cover in minutes. Just
peel-&-stick! Adhesive is specially designed for high
temperatures. A chrome replacement screw-in cap is
included for a complete transformation.
Fits: ’01-’10 GL1800 Models
3909 Chrome Timing Chain Cover Set for GL1800 (set)
$93.99
LiGhtNiNG vaLvE CovERS for GL1800 U.S. Patent D522,930
Create a sleek uniform look without compromising the
integrity of the stock valve covers & risking leakage or less
than perfect fitment. They fit snugly right on top of the stock
valve covers so they look exactly like replacement chrome
covers, but without the expense or the potential headaches.
Fits: ’01-’10 GL1800 Models
3901 Lightning Valve Cover for GL1800 (set/4) $169.99
LowER CowL ChRomE CovERS for GL1800
These streamlined beauties cover that blocky looking lower cowl on
your Wing & install in minutes. These covers work with or without
lower fog lights.
Fits: ’01-’10 GL1800 Models
3906 Lower Cowl Chrome Covers for GL1800 (pr)
$99.99
lower cowl driving lights for GL1800
Dark country roads, dense fog, driving rain, & animals
lurking in the ditches are just a few of the many reasons
Küryakyn’s super bright 35 watt halogen Fog light Kit
makes such good sense. Once installed these feature
total adjustability from the front of the cowl requiring
no disassembly. The complete kit includes everything
needed for easy installation.
Fits: ’01-’10 GL1800 Models (except Airbag Models)
2232 Lower Cowl Driving Lights for GL1800 (pr)
$199.99
2229 Exact Replacement Driving Light Bulb - 35 Watt Super White H-3 (ea)
$10.99
Note: 2-1/2” diameter light includes wiring harness with switch.
8 7 7 . 3 7 0 . 3 6 0 4
d
cB
a
a
e
c
B
d
8
pREmiER ShaRk GiLLS with RadiatoR vENt tRim for GL1800
Make your mile munching GoldWing look like the asphalt eating predator it is. The Shark Gills are a racy,
one-piece, chrome-plated accent that incorporates a streamlined main beam with six stylish vanes. Vent
Trims accent the top & bottom lines. Sold together or separate so you can create your personally desired
appearance. Installation requires no drilling or disassembly of the motorcycle.
Fits: ’01-’10 GL1800 Models
Premier Shark Gills
7319 Premier Shark Gills with Fairing Radiator Vent Trim (set) U.S. Patent D521,417
$159.99
Shark Gills Only
7314 Shark Gills (pr) U.S. Patent D521,417 $89.99
Fairing Radiator Vent Trim Only
7318 Fairing Radiator Vent Trim (set) Patent Pending $79.99
ChRomE ShaRk SkiN RadiatoR GRatE for GL1800
Dress up those boring stock plastic grates with a subtle custom scale mesh
behind a stalking chrome creature that’s ready to eat the road.
Fits: All ’06-’10 GL1800 Models
7329 Chrome Shark Skin (pr) $69.99
7311
7513
7315
7316
fairing side molding trim for GL1500
This one-piece Fairing Side
Molding Trim really adds
sparkle to the GL1500 fairing.
Fits: All GL1500 Models
7311 Fairing Side Molding Trim (pr)
$62.99
e FaiRiNG LiGht ii & miRRoR LiGht kit for GL1800
Fairing Light II with dazzling chrome housings & brilliant amber
L.E.D. lights for incredible side visibility. Finish it all off with our
L.E.D. Mirror Lights which have a slim design & do not detract or
interfere with the viewable mirror surface. Plus they add great
blind spot visibility. Buy the complete kit or purchase items
separately. Either way we have you covered!
Fits: ’01-’10 GL1800 Models (‘06-’10 GL1800’s require P/N 7300
for plug-&-play installation)
7315 Fairing Light II & Mirror Light Kit (set) $124.99
7316 Fairing Light II (pr) $83.99
7513 L.E.D. Mirror Lights (pr) Note: Mirror Lights require hard-wire installation when installed without additional Küryakyn front turn signal accent lighting.
$59.99
7314
7319
7329
9w w w . k u r y a k y n . c o m
7318
L.E.d. FRamE aCCENt LiGhtiNG for GL1800
Set the frame sides ablaze & be seen, yet nearly invisible
when off. These single function amber running light strips
tuck directly under the frame & provide a contoured
illuminated accent line that reflects brilliantly off the
surrounding stock engine chrome. Great looks & additional
side visibility too!
Fits: All ‘01-’10 GL1800 Models
7335 Amber L.E.D. Frame Accent Lighting (pr)
$99.99
ChRomE SaddLEbaG SCuFF pRotECtoRS Patent Pending
Protect your bags in style! Not only do these offer protection, but they
also offer great contrast with black rubber inlayed in shiny chrome.
Installation is hassle free, just peel-&-stick. As a matching complement
add our Chrome Tank Trim with Knee Pads P/N 3916 (pg 11).
Fits: All ’01-’10 GL1800 Models (Not for use with Küryakyn Saddlebag
Side Emblems (P/N 3214) or other products that attach at the forward
side saddlebag body line
3918 Chrome Saddlebag Front Scuff Protectors (pr) $79.99
passenger floorboard side covers for GL1800
Directly inboard of the passenger footset, this chrome cover
spruces up the bike nicely & finishes the luxurious look of our
Boomerang Frame Covers.
Fits: ’01-’10 GL1800 Models
7506 Passenger Floorboard Side Covers (pr) $49.99
boomERaNG FRamE CovERS with Scuff Protector for GL1800
Fully chrome that gray frame in seconds for a huge transformation.
The stylish rubber inserts keep your chrome shining bright.
Fits: ’01-’10 GL1800 Models
3911 Boomerang Frame Covers with Scuff Protector (pr)
$139.99
LouvEREd ChRomE battERy box CovERS for GL1800 U.S. Patent D596,538
Cutting edge louvered styling transforms your wing into the appearance
of a Ferrari. Equipped with provisions for adding custom backlighting,
these add a huge impact of chrome & definitely the vision of speed.
Stand out with contemporary style & distinctive good looks.
Fits: ’01-’10 GL1800 Models
3913 Louvered Chrome Battery Box Covers (pr) $109.99
3914 Louvered Chrome Battery Box Covers for Trike Kits (pr) Fits: All ‘01-’10 GL1800 Trikes from Champion, DFT, & The Trike Shop (Road Smith)
$119.99
8 7 7 . 3 7 0 . 3 6 0 4
m i d - f r a m e
a
a
B
c
B
c
nice
Finishing
touch!
10
c o c k p i t
Some People
Pinstripe Accent Trim -
We Do it in CHRoMe!
d
e
f
chrome tank trim with knee pads Patent Pending
Contoured to match the lines of your Wing, add style, function &
comfort with one piece! Protect new paint or cover up existing
battle scars.
Fits: All ’01-’10 GL1800 Models
3916 Tank Trim with Knee Pads (pr) $109.99
dash top trim Styled to evoke the look of a classic 50’s luxury car, this tasteful
dash trim can be admired by the driver, passenger, & anyone
viewing your bike from the front.
Fits: All ’06-’10 GL1800 Models
3737 Dash Top Trim (ea) $69.99
gas tank door trim
Like a big scoop of ice cream on warm apple pie, this trim is
delicious when served with our Glove Box Accents. Although
tasty by themselves, some things are just better together!
Fits: All ’01-’10 GL1800 Models
3738 Gas Tank Door Trim (ea) $39.99
glove box accents
While many riders choose to highlight their glove boxes with
ordinary pin striping, nothing can match the explosive sizzle of
Küryakyn chrome!
Fits: All ’01-’10 GL1800 Models (except Air Bag Models)
3736 Glove Box Accents (pr) $59.99
chrome handlebar top cover accents Patent Pending
Your cockpit transformation has gone to a whole new level
with these awe inspiring pieces of eye candy. Peel-&-stick.
Fits: All ’01-’10 GL1800 Models
3747 Handlebar Top Cover Accents (pr) $79.99
d
e
h
h
f
g
g
front & rear speaker trimPatent Pending
Give your ride a blast of sizzling style! With 3
dimensional depth & just the right contour, these
accents sure will turn heads, Installs in seconds.
Fits: All ’06-’10 GL1800 Models
3739 Front Speaker Top Trim (pr) $39.99
3732 Passenger Speaker Outer Trim for GL1800 (pr)
$39.99
i
i
3916
Renderings Shown
w w w . k u r y a k y n . c o m 11
universal throttle bosstm
The Throttle Boss will make riding any distance more
comfortable. Designed to fit any type or size grip, the Throttle
Boss can be installed in seconds to provide a cushioned
“platform” to rest one’s palm. When not in use, it can be quickly
removed (without tools).
6251 Universal Throttle Boss (ea) $11.99
throttle rockerThe Throttle Rocker attaches to the grip with a Velcro strap
& allows you to maintain a steady cruising speed without
keeping a tight grip on the throttle.
Fits: Any application with twist grip throttle
6255 Right (ea) $10.99
6256 Left (ea) $10.99
iSo®-GRipS for Use with GL1800 Heated GripsU.S. Patent D411,432 & Patent Pending
Have the luxurious feel & custom look of ISO-Grips without losing the
heat! This clamshell design attaches right over your stock grips allowing
the heat to come through.
Fits: ‘06-’10 GL1800 Models with OEM heated grips.
6183 ISO-Grips for use with GL1800 Heated Grips (pr) $99.99
6184 Sleeve Style Replacement Rubbers for P/N 6183 $20.99Note: Will only accept Throttle Boss (P/N 6242 & 6310). Not compatible with P/N’s 6250 & 6253. Proper installation for all other grip end accessories requires the installation of Smooth Accent Rings (sold Separately). Accent Rings are not suggested for use without additional grip end accessories.
grip end weights for Küryakyn Grips
Cool Grip end weights quickly install on the end of each Grip to add
mass & length to aid in reduction of handlebar vibration.
Fits: All Küryakyn ISO-Grips
Note: ISO-Grips for use with GL1800 Heated Grips (P/N 6183) requires Smooth
Accent Rings for proper installation - Sold Separately).
6238 Grip End Weights (pr) $39.99
6338 Grip End Weights (ea) $21.99
Shown with Red Accent Ring
(Sold Separately)
iso®-grips for GoldWing U.S. Patent D411,432
Combining style & comfort, these popular ISO-
grips provide a soft, non-slip surface that
dampens operating vibration. Recessed
areas between the ISO-Pads permit air
flow for added comfort in hot weather.
Fits: ’75-’10 GoldWings
6180 ISO-Grips with Chrome Accent (pr)
$74.99
Note: These grips do not support the heated grip option on many late Model bikes. They also are not compatible with OEM bar-end weights found on many bikes. The majority of the time, removing these weights is a simple affair & the vibration absorbing quality of our ISO-Grips more than compensates for the vibration damping lost by removal of the bar-end weight.
ChRomE adjuStabLE LEvER SEtS for GL1800
A sleek chrome version of the stock GL1800 levers. Riders retain
the reach adjustment of their original levers.
Fits: ‘01-’10 GL1800 Models
7436 Chrome Adjustable Lever Sets for GL1800 (pr)
$44.99
8 7 7 . 3 7 0 . 3 6 0 4
g r i p s & a c c e s s o r i e s
6183
6242
7436
12
6310
6238
6250iso®-throttle bosstm Reduce muscle stiffness & fatigue with this small adjustable “paddle”.
Position under the palm of one’s throttle hand & slightly relax the grip
on the throttle - but maintain a constant speed!
For iso-Grips for heated grips (P/N 6183)
6310 Contoured ISO-Throttle Boss - Right (ea)
$19.99
6242 Extended ISO-Throttle Boss (1/4” longer than standard ISO-Throttle Boss) Right & Left (ea)
$20.99
For ISO-Grips
6250 ISO-Throttle Boss (ea) $17.99
6253 ISO-Throttle Boss (pr) $31.99
6299 Contoured ISO-Throttle Boss - Right Side (ea) $19.99
6309 Contoured ISO-Throttle Boss – Left Side (ea) $19.99Note: ISO-Grips for use with GL1800 Heated Grips (P/N 6183) will only accept ISO-Throttle Boss (P/N 6242 & 6310).
13w w w . k u r y a k y n . c o m
Power
At Your
Fingertips!
1483
ELECtRiCaL powER poiNtPerfect for plugging in your cell phone, iPod, GPS, air
pump, or any other electrical device, this power point/
cigarette lighter will keep them powered. Comes with
everything you need to connect directly to your battery
with a quick disconnect.
1483 Fits: All GL1500 & 1800 Models (ea) $69.99l.e.d. battery gauge Our L.E.D. Battery Gauge is an array of L.E.D.’s
indicating the operating voltage of the bike’s electrical
system. Simple two-wire connection & a compact
size (about 2” x 3/4” x 3/16”). A daylight sensor
automatically adjusts the brightness of the L.E.D.’s.
4219 L.E.D. Battery Gauge, Chrome (ea) $39.99
4218 L.E.D. Battery Gauge, Black (ea) $39.99 handlebar risers/setbacks for GL1800
With 5 different position options, adjust your
handlebars to make your GoldWing the most
comfortable ride. With all the parts you need, we
don’t know anyone who offers this many options &
convenience in one set.
Fits: ‘01-’10 GL1800 Models
7437 Handlebar Risers for GL1800 (set) $79.99
Adjust Your Hands
Up to 2” Horizontally &
1-1/2” Vertically
aCCESSoRy SwitChES for Master Cylinder Reservoir Covers
Keep control of your accent lighting & additional motorcycle
accessories at the tip of your fingers with these master
cylinder Accessory Switches. Rated for 12V & up to 10 Amp
accessories each.
Fits: All GL1500 & 1800 Models
7803 Accessory Switches for Master Cylinder Reservoir Covers (ea)
$74.99
Note: Additional Metric Cruiser Fitments - pg 48.
ipod interface for GL1800Bring your Wing to the next level & get the
ultimate iPod experience. Listen to your
favorite songs from your iPod or iPhone &
control them from your factory audio system.
Features:• Plug & play (Plugs into existing factory
CD player)
• Keeps iPod/iPhone charged
• Allows simultaneous control of iPod/iPhone with
handlebar, radio or iPod/iPhone
• Provides clear audio with no FM interference &
perfect audio level matching of iPod
• Licensed by Apple
• Auto plays
every time the
ignition is turned
on or when selected
as the radio’s audio
source-Will also auto pause
when the ignition is turned off or when
sourced away
• Includes 6ft connect cord so iPod device can be
stored in fairing pocket, rear trunk or anywhere
on bike
Fits: All GL1800 Models
870 Ipod Interface (ea) $199.99
h a n d l e b a r a c c e s s o r i e s
Mount on
left or
Right Side!
870
14 8 7 7 . 3 7 0 . 3 6 0 4
snap-n-gotm drink holders Ride on with the plush comforts you deserve. Select
the drink holder style you desire & install the mount
directly to your clutch/brake master cylinder clamp or
use the 1” bar mount. Simply snap on or off the drink
holder & leave a simple clamp or stud on your bars when
not being used.
Fits: All GL1800 & GL1500 Models (Mounting stud replaces
clutch or brake perch bolt for mounting)
1486 Snap-N-Go with Stainless Steel Mug (ea) $39.99
1487 Snap-N-Go with Universal Basket (ea) Note: Accepts beverage containers from 2-3/8” to 3-1/2” in diameter.
$39.99
1469 Replacement Stainless Steel Küryakyn Travel Mug (ea)
$17.99
Note: Additional Metric Cruiser Fitments Online. 1” clamp not used for GL1800/1500 applications.
1486
14631459
1500
Mounts on
Clutch or Brake
Perch!
1462
uNivERSaL aCCESSoRy mouNt & dRiNk hoLdERS Bringing along a beverage could not be easier, simply select the style of Universal Drink Holder that
works best for you. Or Attach your cell phone, mp3 player, or nearly any portable device directly to your
clutch perch or brake master cylinder mount with our Universal Accessory Mount. It accepts belt clips,
screw mounts, 4 hole AMPS pattern & hook-&-loop straps. All accessories are equipped with a quick
detach thumbscrew that leaves a simple mount when it is not in use.
Fits: All GL1500 & 1800 Models
for Clutch or Brake Perch Mount
1461 Universal Accessory Mount (ea) $59.99
1462 Universal Drink Holder with Basket Note: Accepts most average sized cups, cans, bottles & mugs with a 2” to 3 1/2”diameter
$59.99
1463 Universal Drink Holder with Stainless Mug $59.99
Clutch or Brake Perch Mount Kit (Mount post only)
1472 Clutch or Brake Perch Mount Kit (ea) Note: Requires existing Küryakyn Drink Holder or Accessory Mount. See Additional Typical Metric Applications pg 48.
$26.99
Additional Metric Cruiser Applications - pg 48
beverage carrier Patent Pending
Upgrade your Küryakyn Universal Drink Ring
to accept most cups, cans or bottles. Easy on,
easy off snap design that is also collapsible for
storage. Made from PVC leather & works with
any Küryakyn “ring” style drink holder.
1459 Beverage Carrier Only (ea) $9.99
Beverage Carrier Plus MountNeed the whole package...something to
hold your drink & the mount? Choose from
the options below & you’ll be set.
1460 Snap-N-Go Drink Ring with Beverage Carrier (ea) Fits: Universal Perch Mount or 1" Bar Applications
$29.99
1488 Universal Drink Ring for 1” Bar with Beverage Carrier (ea) $49.99
1489 Universal Drink Ring for 1-1/4” Bar with Beverage Carrier (ea) $49.99
1500 Universal Drink Ring for Perch Mount with Beverage Carrier (ea) Fits: GL1500 & 1800 Models Note: See Additional Metric Cruiser Fitments - pg 48.
$49.99
Conveniently
Bring Your
Drink With You!
1487
1461
Passenger
drink holder
pg 16
15w w w . k u r y a k y n . c o m
t o u r i n g c o m f o r t
All Airmaster Products are Hard Coated Polycarbonate
Adjustable
Vents
dragon wingstm vented wind directors for GL1800
Put yourself in direct control of side wind from your
mirror down the full side of your fairing. With two
adjustable wind directors per side, you can direct wind
down & away or up & into the fairing compartment in
varying volumes. Both drivers & passengers benefit
from less turbulence, rain & debris.
Fits: All ’01-’10 GL1800 Models
1388 Dragon Wings for GL1800 (pr) $179.99Note: Do not use Rain-X or other ammonia based cleaning or protection products on this product.
REaR aiRFoiL for GL1800 U.S. Patent D601,066
If you want to greatly reduce buffeting & virtually eliminate
annoying back draft this mere seven inch tall Rear Airfoil is
the answer.
Features:
• Hard-coated polycarbonate for quality,
strength, & scratch resistance
• Quick detach
• Hint of a Tint Clear or Dark Smoke tint with
aerodynamic styling to complement passenger seat
Fits: All ’01-’10 GL1800 Models
1384 Rear Airfoil, Dark Smoke (ea) $124.99
1385 Rear Airfoil, Clear (ea) $124.99Note: Do not use Rain-X or other ammonia based cleaning or protection products on this product.
pERFoRmaNCE wiNdShiELd for GL1800
Being “in the wind” is a big reason why
many of us ride. But too much turbulent
air detracts from the experience. Three
inches wider than stock “per side” create the
perfect calm pocket of air without negatively
affecting handling or crowding the driver.
Features:
• Hard-coated polycarbonate for quality, strength,
& scratch resistance
• Black gradient with vinyl protectors on lower portion
to avoid abrasion
• Retains mounting points and heath adjustment similar to stock
Fits: All ’01-’10 GL1800 Models
1382 Performance Windshield with Rear Airfoil (set) $399.99
1383 Performance Windshield (ea) $299.99Note: Vent not included. The Performance Windshield has the standard cutout for installation of OEM windshield vent. For ’01-’02 GL1800’s without vent we suggest ordering OEM GL1800 Windshield vent for installation. Do not use Rain-X or other ammonia based cleaning or protection products on this product.
Vent Not Included
excellent
Wind Control for
Both Hot & Cold
Riding Days!
25-1/2”
33-1/2”
RIDER TESTIMONY- Our test riders could not believe the performance & left us with praise for creating a protected cockpit of air for both driver & passenger. The true amazements were “no buffeting or poor handling when passing through the traffic of 18 wheelers.” There is nothing else out there that provides better wind protection unless you’re getting in your car or truck.Note: Best results reported when using Performance Windshield with Rear Airfoil.
1382
1384
The Only Place You’ll Get a More
Calm, Quiet & Peaceful Riding
Environment is in the Confines of
Your Car!
16 8 7 7 . 3 7 0 . 3 6 0 4
4110
4111
4115
4112
passenger armrest pouchMounts to the underside of any left side Küryakyn armrest & has room
for your essential items such as a cell phone, sunglasses, or iPod. Also
includes a quick detach system allowing use as a fanny pack or purse.
Fits: GL1800 Passenger Armrests (P/N 8991)
Dim: 8-1/4" Wide x 4-1/2" High x 3-3/4" Deep Cubic Inches: 90
4196 Passenger Armrest Pouch (ea)
$35.99
sheepskin comfort covers for GL1800No man-made material can match the ability to insulate from heat or cold, control moisture,
or provide resilient padding as our premium New Zealand, 1” thick shearling. Providing the
appearance of a fully custom seat, the edge tucks under the seat & keeps the cover securely in
place yet removes in seconds if needed. You won’t believe the difference!
Passenger Ergonomic Comfort Wedge Covers These covers angle the top of your existing passenger pad 2” forward for upper back support
while keeping the lower seating position. Sheepskin or Standard.
Fits: All ‘01-’10 GL1800 Models with stock OEM Seat
4110 Sheepskin Seat Base Cover (ea) $269.99
4111 Sheepskin Driver Backrest Cover (ea) Fits: Küryakyn Driver Backrest (P/N 8990) $75.99
4112 Sheepskin Passenger Arm Covers (pr)Fits: Küryakyn Passenger Armrests (P/N 8991) $64.99
4113 Sheepskin Passenger Backrest Cover (ea) $99.99
4115 Sheepskin Passenger Backrest Cover w/Comfort Wedge (ea) $149.99
4116 Standard Passenger Backrest Cover w/Comfort Wedge (ea) Note: Coordinating style with OEM seat.
$99.99
seat Rain Covers (black) Keep riding in the rain while protecting your seat or Sheepskin Seat Covers.
Fits: All ’01-’10 GL1800 OEM Seats or similar shaped aftermarket seats (Fits over Küryakyn
Sheepskin Seat Covers & Küryakyn Seats)
8967 Passenger Backrest Rain Cover (ea) $29.99
8968 Seat Base Rain Cover W/Driver Backrest (ea) $49.99
8969 Seat Base Rain Covers without Driver Backrest (ea) $42.99
1494 1481
StandardFits: All ’01-’10 GL1800 Models (Parts Sold Individually -
Compatible with OEM Seat Components Unless Noted)
8975 Driver & Passenger Seat Base (ea)
$749.99
8976 Heated Driver & Passenger Seat Base with Hi/Low/Off Control (ea) Note: Passenger seat heat requires P/N 8974 for function.
$1,099.99
8977 Driver Backrest (ea) Note: Only for use with Küryakyn Seats for GL1800.
$215.99
8974 Heated Passenger Backrest for Hi/Low/Off Seat Base (ea) Note: Heat Function only for use with Küryakyn Seats (P/N 8976).
$269.99
8978 Passenger Backrest (ea) $249.99
Heated (oem models with heated seats)Fits: All ’06-’10 GL1800 Models with OEM Heated Seats
(Parts Sold Individually - Compatible with OEM Seat
Components)
8961 Heated Driver & Passenger Seat Base for OEM Controls (ea)
$1,069.99
8962 Heated Passenger Backrest for OEM Controls (ea)
$289.99
passenger drink holder for GL1800 Patent Pending
Don’t cut a nice ride short because of a parched passenger! These
drink holders mount to either the right or left seat handle, are out of
the way but still within easy reach, & are easily removed with thumb
nut mounting when not in use.
Fits: ‘01-’10 GL1800 Models
1481 Passenger Drink Holder with Basket (ea) Note: Stainless Steel Mug (P/N 1469) not included.
$59.99
1494 Passenger Drink Holder with Mug (ea) $59.99
padded bar covers for Driver Backrest
Keep your passenger happy & cover those steel bars - they’re cold when
it’s cold, hot when it’s hot, & they’re always hard.
Fits: All ’01-’10 GL1800 with Küryakyn Driver Backrest (P/N 8990)
4136 Padded Bar Covers for Driver Backrest (pr) $29.99
17w w w . k u r y a k y n . c o m
rider backrest for GL1800 U.S. Patent D528,311 & 7,318,624
Ultimate comfort; hours in the saddle will feel like minutes in your
favorite easy chair. Quick release mounts allow easy removal &
adjustability to suit each rider while allowing fully forward folding
for easy access to the passenger seat. The upholstered backrest pad
matches the OEM seat & features a convenient rear storage pouch.
Fits: ’01-’10 GL1800 Models
8990 Rider Backrest for GL1800 (ea) $299.99
Convenient
Storage Pouch
Three-Position
Adjustability
paSSENGER aRmREStS for GL1800 U.S. Patent D526,952 & 7,114,774
Add additional comfort to the back of your Wing. With Sturdy chrome brackets
mounting directly to the tour trunk, These beauties swing out when needed for easy
mounting. The rubber top pad matches the style of the OEM seat & hides a convenient
swing out cup holder.
Fits: ’01-’10 GL1800 Models
8991 Passenger Armrests for GL1800 (pr) $269.99
8985 Küryakyn Can Cooler (pr) $5.99
8975
8977
8978touRiNG SEatS for GL1800Driver & Passenger Seat Base The ultimate in seating comfort for both of you! The full seat is 1” lower than
stock & pushed 1” to the rear. Wider & Angled back to cup your backside,
pulls you in - instead of pushing you out. A narrow front also aids in firmer
ground footing. Coordinate with the stock passenger backrest pad or our
passenger backrest. Constructed from the highest-grade seat materials with
premium rigid seat pan- you won’t find a better seat on the market.
Heated Driver & Passenger Seat Base All the features above with the addition of heat! Never have a cold tush on
the road again.
Heated OEM Seat Models: Installs with direct plug-&-play installation.
Simply select Seat Base &/or Passenger Backrest & you’re on your way.
Non-Heated OEM Seat Models: Equipped with control switches (Hi/Low/Off)
for dual zone driver or passenger.
Important Note: Non OEM Heat Applications - Heated Seat Base & Passenger Backrest required for passenger heat function to work.
Driver Backrest Plug directly into this seat & gain support from an 11” top pad that narrows
to 7” for ample passenger leg room. Fully adjustable with 2” front/rear
& 2-1/2” vertical adjustment. Conveniently folds out of the way for easy
passenger mounting. With this one, everyone will be happy!
Passenger Backrest Passengers feel fully supported & sit up more vertically. Angled 2” forward
from stock at the top & pushed to the rear at the base.
The ergonomic
Comfort You
Deserve!
18 8 7 7 . 3 7 0 . 3 6 0 4
f o o t p e g s & b o a r d s
hEEL-toE ShiFtER for GL1800
We understand that a lot of riders
want the convenience of a heel-toe
shifter while retaining their foot
pegs, & we answered.
Fits: ‘01-’10 GL1800 Models
4039 Heel-Toe Shifter for GL1800 (ea)
$189.99
dRivER FLooRboaRd kit for GL1800 U.S. Patent D528,476; D531,092 & 7,287,773
Put your feet in a more comfortable position, gain the convenience of a heel-toe shifter
& improve the look of your ride all at once! The smooth stylish brake lever & cushy,
full-length ISO rubber inserts absorb vibration for a more comfortable & bearable ride. The
boards fold up for easy maneuvering in tight spaces & allow easy access to the stock kickstand.
Fits: ‘01-’10 GL1800 Models
4038 Driver Floorboard Kit (pr) $399.99
4048 Replacement Shift Fork Bushings (ea) $10.99
4049 Replacement Board Guards (pr) $10.99
kickstand extension
Add ease to deploying your
kickstand or allow kickstand
deployment with Driver floorboards
without having to flip up your boards.
Fits: Stock OEM Kickstand or Stand-Rite Kickstand
(P/N 7104)
7109 Kickstand Extension (ea) $39.99Note: For best results use our Stand-Rite Kickstand (P/N 7104).
stand-rite kickstand for GL1800
A beautifully chromed stand that
looks great & works perfectly!
Fits: ’01-’10 GL1800 Models
7104 Stand-Rite Kickstand (ea)
$93.99
7939
ChooSE thE pEGS you waNt......& Select the adapter you Need.
Full line
of Pegs
pg 52-53
8808
Splined Adapters
Model Year Front RearGL1800 ’01-’10 8808 None
Splined Adapters required for SwingWing Pegs (P/N 4467). Universal Floorboards will not install on GL1800.
SweptWing Peg
SwingWing Peg
Pilot Pegs Online P/N 4419
Footpeg Adapters
Model Year Front RearGL1800 ’01-’10 7939 NoneGL1500 ’88-’00 7946 None
19w w w . k u r y a k y n . c o m
oFFSEt pEGS with Quick Clamps U.S. Patent D405,393 & D411,440
Redefines the term long haul comfort, this
adjustable system accommodates nearly
any rider.
Fits: GL1500, Valkyrie, (except Interstate) & most
bikes with 1” engine guards
7976 Offset Dually ISO-Pegs with 1” Clamps (pr)
$145.99
LoNGhoRN oFFSEtSWith 360 degrees of adjustability
& a 3-1/4” arm, give your feet an
incredible 6-1/2” range of positioning.
Push out your cruise pegs or pull
them back to you & be happy.
7980 Longhorn Offset Dually ISO-Pegs with 1” Clamps (pr) U.S. Patent D405,393
$155.99
ADJUSTABLE
7980
tRaNSFoRmER FLooRboaRdS for Passengers
Ingenious floorboards offering a hidden flip
out passenger cruise peg. The alternative
footrest is positioned 4-1/2” higher & 5-1/2”
farther forward than the stock. Stretch out & relax
or fold them into the floorboard for the full support of a floorboard.
Mounting as a direct replacement, you will love function, comfort, &
the additional chrome.
7005 Transformer Floorboards Fits: ’01-’10 GL1800 (pr)
$249.99
new style replacement rubber pads for transformer boards
Update your Transformer Boards to these new style rubbers -
Looks great with stock driver pegs!
4384 Full Pad Style Replacement Rubbers (set) $49.99
4453
4033
7938pEGS Equipped with Adapters for GL1800
Direct replacement driver pegs with the comfort & style you love.
7938 Dually ISO-Pegs for GL1800 (pr) U.S. Patent D405,393
$72.99
4453 ISO-Wings for GL1800 (pr) $103.99Note: Other peg styles available. Complete selection - pg 52-53.
bRakE aRm with pEdaL for GL1800
Pure class with smooth lines, deep chrome & black rubber ISO-Pads
make this a beautiful & comfort aiding addition to your Wing.
4033 Brake Pedal for GL1800 (ea) $83.99
20 8 7 7 . 3 7 0 . 3 6 0 4
ERGo ii CRuiSE mouNtS for GL1800
Undeniably the best highway pegs available for the GL1800. Simply select your desired peg
style & arm length for the perfect foot position. The included two-piece clamp secures to the
lower engine guard & will keep your pegs high & tight for excellent cornering clearance.
Fits: ’01-’10 GL1800 Models
Mini Arms (for Taller Riders) for GL1800
4073 with Dually ISO-Pegs (pr) U.S. Patent D405,393 $209.99
4074 with Switchblade Pegs (pr) U.S. Patent D506,707 & 6,893,038 $259.99
6” Arms (for Shorter Riders) for GL1800
4056 with Dually ISO-Pegs (pr) U.S. Patent D405,393 $199.99
4057 with ISO-Wings (pr) $239.99
4064 with Switchblade Pegs (pr) U.S. Patent D506,707 & 6,893,038 $259.99
4058 with Lighted Cruise Boards (pr) $289.99
4059 with Unlighted Cruise Boards (pr) $269.99Note: Küryakyn Highway Pegs offer a wide range of adjustment. It is the responsibility of the installer or the end user to ensure they do not interfere with the operation or cornering clearance of the motorcycle.
Ergo Cruise Mounts with 6” Arms (for Shorter Riders) for GL1500
Fits: ’98-’00 GL1500 & All Valkyrie (except Interstate)
4050 Ergo with Dually ISO-Pegs (pr) U.S. Patent D405,393
$199.99
4040 Ergo with Lighted Cruise Boards (pr) $289.99
4041 Ergo with Unlighted Cruise Boards (pr) $270.99
4052 Ergo with ISO-Wings (pr) $218.99
Ultimate
Adjustability!
light em’ Up!
l.e.d. accent lighting inserts for Ergo & Ergo II Cruise Pegs
Add additional running lights or turn signal accents
right into the slots of your short or long Ergo Arms
& be seen with style.
Fits: Ergo & Ergo II Cruise Pegs (Long & Short Arms)
4072 Accent Lighting Inserts (pr) $49.99Note: Not compatible with Mini Arms.
extended peg mount clevisSlight changes can have a great
impact & when you ride long dis-
tances comfort improvements are a big
plus. Replace the stock clevis & move your highway pegs out 7/8”
on each side with these simple to install mounts.
Fits: All Ergo II Cruise Pegs for GL1800 with Pegs & Short 4-1/2” arm
or Long 6” arm (Does not install with Mini Ergo Arms or floor board
applications)
4075 Extended Peg Mount (pr) $34.99Note: Mount arm is suggested to be positioned horizontally or above to maintain appropriate ground clearance.
Replacement Components for Ergo & Ergo II Applications
Tailor your footpeg placement exactly where you want.
4060 Short Ergo Arm, 4-1/2” (pr) $49.99
4061 Long Ergo Arm, 6” (pr) $49.99
4071 Mini Ergo Arm (pr) Note: For Ergo II Only.
$59.99
4074
Switchblade Open
4056
4058 4057
4059
Range
of Motion
21w w w . k u r y a k y n . c o m
r e a r e n d
L.E.d. SpoiLER RuN-tuRN-bRakE LiGhtbaR for GL1800
Safety & style unite. With bright L.E.D.’s
this lightbar mounts up high where people
will see it. The entire lightbar functions
as red running & brake lights in addition
to each outer 1/3 providing amber turn
signal accents for full visibility. Plug-&-
play installation.
Fits: Honda Spoiler for all ‘01-’10 GL1800
Models
3216 L.E.D. Spoiler Run-Turn-Brake Lightbar (ea)
$119.99
trunk keyhole trim for gl1800 Patent Pending
Small part, huge impact! That’s what
you get when you add the Trunk
KeyHole Trim for your GL1800. With a touch of pin striping in the chrome & even
covering inside the lock depression, this trim piece adds a touch of classic styling
to your ride.
Fits: All ’01-’10 GL1800 Models
3219 Trunk KeyHole Trim (ea) $19.99
SpoiLER ENd tRim with L.E.D. accent lights for gl1800
It’s all about visibility. Gleaming chrome spoiler accents
deploy brilliant auxiliary turn signals or brake lights angled
outward to help get the attention of surrounding traffic. A
simple plug-&-play installation that enhances form & function!
Fits: Current style Honda Spoilers for all ‘01-’10 GL1800 Models Note: Will not fit GL1800 with older style spoilers manufactured/purchased ’01 to early ‘05 with outside edges that curve down.
3217 Spoiler End Trim with (2 Function) Accent Lights (pr)
$129.99
Run
Turn
Brake
l.e.d. lighted trunk lid handle for GL1800
Style & function, add this smooth chrome handle with incorporated
L.E.D brake light up high for added visibility.
Fits: All ’01-’10 GL1800 Models
3215 L.E.D. Lighted Trunk Lid Handle for GL1800 (ea)
$99.99
a
a
B
B
c
c
de
e
d
chrome saddlebag spoilers for GL1800 Patent Pending
Dare to be different & add some smooth classic styling
to your modern bike. Made from a durable, lightweight ABS that is
contoured just right to fill the void between trunk & saddlebags.
Fits: All ’01-’10 GL1800 Models
3218 Chrome Saddlebag Spoilers (pr) $69.99
22 8 7 7 . 3 7 0 . 3 6 0 4
license area trim with lights for GL1800 U.S. Patent D528,486
Smooth the sunken depression around
your license plate with a full panel
chrome frame. The additional built in
L.E.D running light goes super bright
when you hit the brakes.
Fits: ’01-’10 GL1800 Models
3135 License Area Trim with Red Light (Red Lens) (ea)
$124.99
3136 License Area Trim with Red Light (Clear Lens) (ea)
$124.99
rear fender trim for GL1800
This handsome trim strip installs easily on the
bottom edge of the rear fender & provides a
classy finishing touch. Peel-&-stick installation.
Fits: ’01-’10 GL1800 Models
9017 Rear Fender Trim (ea) $29.99
looks great
with lighted
trunk molding!
off
3213
3135
9017
3213
7456
3222
LiGhtEd SaddLEbaG moLdiNG for GL1800U.S. Patent 6,939,029; D488,105 & D491,493
Add the sparkle & elegance! The state-of-the-art red L.E.D. lights have an eye-catching, brilliant
quality that draws minimal power & generates very little heat. Look great by themselves or with
our other L.E.D. accessories. Any other type of lightbar is now ancient history.
Fits: ’01-’10 GL1800 Models
3202 Red Lens L.E.D. Saddlebag Molding Set (4 pcs) $249.99
3222 Chrome Lens L.E.D. Saddlebag Molding Set (4 pcs) $249.99
saddlebag bottom trim molding for GL1800
Complete the transformation of your rear moldings to chrome. Select
either lighted or none lighted for the perfect compliment to our Lighted
Trunk & Saddlebag moldings.
Fits: ’01-’10 GL1800 Models
3213 Red Lens Lighted L.E.D. Saddlebag Bottom Trim Molding (set) U.S. Patent D575,008 & D575,201
$169.99 saddlebag side emblems for GL1800 U.S. Patent D595,617
Accenting this natural body line makes a
profound visual statement. Create an illusion
of speed & elegance.
Fits: ’01-’10 GL1800 Models
Note: Does not install with New Chrome Saddlebag Scuff Protectors (P/N 3918)
3214 Saddlebag Side Emblems (pr)
$39.99
l.e.d. rear reflector conversion for GL1800
Light up the night & replace your reflector with bright L.E.D’s.
Functioning as running & brake lights this is a direct replacement
with plug-&-play wiring.
Fits: ’01-’10 GL1800 Models
7456 L.E.D. Rear Reflector Conversion (ea) $59.99
23w w w . k u r y a k y n . c o m
tuRNdowN ExhauSt ExtENSioNS
for GL1800
Give your GL1800’s exhaust a smooth, finished
appearance. Beautiful chrome with quick & easy
installation will provide years of trouble free elegance.
Fits: ’01-’10 GL1800 Models
7606 Turndown Exhaust Extensions for GL1800 (pr) $135.99
3201
3228
triple straight exhaust extensions for GL1800
These burly Exhaust Extensions
really make a statement. Their
size & six outlets allude to the
power of the 1800 c.c. giant.
Secretly your exhaust is directed
down to keep it away from for
saddlebags, optional trailers, & to keep
your tips sparkling bright. These extensions
easily replace the stock muffler tips & include necessary
mounting hardware.
Fits: ’01-’10 GL1800 Models
7604 Triple Straight Exhaust Extensions for GL1800 (pr) $179.99
ChRomE Low pRoFiLE
SpoiLER with l.e.d. run-turn-brake light for gl1800
Patent Pending
The total package! Features an all chrome spoiler with integrated L.E.D.
Run-Turn-Brake light bar. Uses the same mounting holes as the Honda spoiler
(requires drilling holes on non-spoiler bikes) with plug-&-play lighting.
Fits: ‘01-’10 GL1800 Models
3228 Chrome Low-Profile Spoiler (ea) $259.99Note: Spoiler includes L.E.D. Run-Turn-Brake Light Bar, see pg 63 for additional function/feature description. Does not accept Spoiler End Trim (P/N 3217).
Choose Chrome
or Red lenses!
run-turn-
brake!
lighted trunk molding for GL1800 U.S. Patent 6,939,029; D488,105 & D491,493
Pure class best describes this beautiful Lighted Trunk Molding.
Styled to be a perfect match for our Lighted Saddlebag Molding,
they look incredible in a complete set. Function as both running
& brake lights with minimal draw on the electrical system.
Fits: ’01-’10 GL1800 Models
3201 Red Lens L.E.D. Trunk Molding Set (3 pcs) $189.99
3221 Chrome Lens L.E.D. Trunk Molding Set (3 pcs) $189.99
24 8 7 7 . 3 7 0 . 3 6 0 4
luggage rack risers for GL1800
Raise your luggage rack 5/8” & get a larger diameter footprint. Makes
cleaning under your rack easier as well as spreads the load a bit.
Reuses stock mounting holes.
Fits: ’01-’10 GL1800 Models (For use with Küryakyn Luggage Rack
P/N 7151)
7154 Luggage Rack Risers (set) $39.99
deluxe convertibletm luggage rack bag with Protective Cover
Bring everything you need with you! Elastic
mesh pockets & multiple pouches make your
items readily accessible. 1200 Denier nylon
construction, heavy-duty zippers, & zip-out
rain cover. Bag also features mounting straps
utilizing both hook-&- loop fasteners & elastic
shock cords. Attaches to GL1500 & GL1800 racks
as well as most other racks on the market.
4162 Black (ea) $49.99
lid organizer bag for GL1800
Keep important or fragile items at your fingertips
with the Lid Organizer Bag. A variety of padded &
see-through mesh compartments offer protection
& easy accessibility for frequently used items.
Quick disconnect fasteners & handles make it
easily portable.
Included Items: Lid Organizer Bag, 1/4 Turn
Mounting Connectors, Mirror
Dim: 12” Tall x 22” Wide
Fits: All ’01-’10 GL1800 Models
4135 Lid Organizer Bag for GL1800 (ea) $51.99
Convenient
5” x 7” Flip-out
Mirror
LuGGaGE RaCk for GL1800
The best looking luggage rack available for your Wing! This burley
billet aluminum rack is extremely strong, includes an embedded
rubber center pad & is finished off in dazzling chrome of course.
Fits: ’01-’10 GL1800 Models (will install with Honda Spoiler &
Küryakyn Spoilers)
7151 Luggage Rack (ea) $239.99Note: Luggage Rack Risers sold separately.
flag pole & holder for Luggage Racks
Fly your flag proudly. Use the flagpole included in the kit for a blended,
one-piece look, or insert your own pole (will secure a 1/4” to 3/8”
flagpole). With quick adjustability angle your staff without tools
or fold it down out of the way. Includes a 4” x 9” American flag.
4216 Flag Pole & Holder (ea) Fits: Küryakyn Luggage Rack for GL1800 (P/N 7151)
$79.99
4215 Flag Pole & Holder (ea) Fits: Küryakyn Luggage Rack for GL1500 (P/N 7150) or other 1/2” tubing applications
$79.99
4264 Replacement American Flag (ea) $10.99
antenna flag mount with flag Easiest, out of the way antenna base flag mount. Made
of sturdy aluminum, this flag is 4” x 9” with a total pole
height of about 12”. Just tighten a set screw & hit the
road with pride.
4233 Antenna Flag Mount with Flag for GL1800 (ea) Fits: ’01-’10 GL1800 Models with stock antenna or over approximately a 0.6” tube
$69.99
4264 Replacement American Flag (ea) $10.99
more luggage found online
7154
7151
25w w w . k u r y a k y n . c o m
trailer hitch receptacle5-pin receptacle with a chrome mounting
bracket.
9183 Trailer Hitch Receptacle, Universal (ea)
$48.99
Note: Will not install with Trailer Hitch Rack (P/N 7643).
vertical mount flagPride. Love of the country.
Respect. Whatever the reason
you choose, display Old Glory
or remember our P.O.W.’s.
Mount straight, securely, & with
dignity. American Flag is 6” x 11” &
P.O.W. MIA Flag is 6” x 9”.
4254 1/2” Vertical Flag Mount (kit) Fits: Küryakyn Luggage Rack for GL1500 (P/N 7150) or Universal on 1/2” horizontal tube
$69.99
trailer wiring harness & relaySafely & properly apply the load from the trailer lighting to the battery.
Select the Universal or Goldwing specific Plug-&-Play kit that plugs inline
to the main rear harness. Finish up by connecting directly to your battery
& wiring to your trailer plug. Add the 5 to 4 Converter for trailers with 4-wire
connectors & it plugs right inline.
7665 Plug-&-Play Wiring Harness & Relay for GL1800 (ea) $69.99
7666 Plug-&-Play Wiring Harness & Relay for GL1500 (ea) $69.99
7667 Universal Wiring Harness & Relay (ea) $69.99
7669 Plug-&-Play Universal 5 to 4 Wire Trailer Hitch Converter (ea) $29.99Note: Receptacle kits are not included because the style of receptacle used on trailers varies from manufacturer to manufacturer.
tRaiLER hitCh for GL1800
The strongest hitch available! Its
superior 6 point mounting system is
fully hidden except for the receiver
style hitch ball & front chromed
mounting points. Installation is easily
done on the center stand with common
tools & tire changes are effortless with
simple removal of the rear support plate.
There is no stronger, convenient hitch on
the market.
Fits: ’01-’10 GL1800 Models
7647 Trailer Hitch for GL1800 (ea)
$299.99
primoshieldtm full & half coversLightweight, compact & water-resistant bike covers offered in full or half sizes. A soft
fabric liner protects your windshield & fairing from abrasion. The bottom panels are heat/
scorch resistant & include an elastic hem coupled with reinforced grommets & shock
cords to ensure a great fit.
4120 Full Cover, Black (ea) $69.99
4122 Full Cover, Silver (ea) $69.99
4121 Half Cover, Black (ea) $49.99
4123 Half Cover, Silver (ea) $51.99
high output charging system for GL1500
With 2-1/2 times the output of the stock charging system, this solves
charging problems on GL1500’s. The 90 amp alternator features temperature
compensated voltage regulation, a full 12 month
warranty, & delivers an amazing 60 amps even
at idle!
500 90 Amp Alternator for GL1500 (ea)
$439.99
501 90 Amp Alternator with Generation III Battery for GL1500 (ea)
$535.99
debris modulator mud flap for GL1800
Helps reduce road spray & leaves the dirt behind you.
Black & chrome with 2 stylized lenses. Run-&-brake
function adds an extra measure of visibility!
Fits: ‘01-’10 GL1800 Models
7251 Debris Modulator Mud Flap (ea) $149.99
7248 Mounting Kit for use without Küryakyn Trailer Hitch (ea)
$39.99
7249 Mounting Kit for use with Küryakyn Trailer Hitch (ea)
$22.99
7646 Mudflap Adapter Required when using Debris Modulator with Mounting Kit (P/N 7248) & Exhaust Extension (P/N 7604 or 7602)) (ea)
$25.99
Wiring Harness &
Relay All in one Kit!
7667
7666
7669
t o u r i n g a c c e s s o r i e s
26
ca
n-a
m
a
c
a62411365
B
iso®-grips & iso®-flame gripsCombining great style & comfort, these grips provide a
cushy, non-slip surface that dampens operating vibration.
Recessed areas between the ISO-Pads permit air movement
for added comfort in hot weather.
Fits: All ’08-’10 Can-Am Spyder RS Models Only
Note: Does not support heat function for Can-Am Models with Heated Grips.
6241 ISO-Grips (pr) U.S. Patent D411,432
$74.99
6263 ISO-Flame Grips (pr) $74.99
widowtm windshield trim Cutting-edge style! Give your
Spyder complete Widow
styling with the Premier Kit or add
your own touch with either the Widow Windshield Emblem
or Lower Windshield Edge Trim.
Fits: All ’08-’10 Can-Am Spyder RS Models Only
1365 Premier Widow Windshield Trim with Emblem (ea)
$89.99
1366 Lower Windshield Edge Trim (ea) $59.99
1368 Widow Windshield Emblem (ea) $29.99
handlebar accentsAdd some much needed sizzle from the rider’s
perspective. These chrome & black inserts install easily
in existing depressions for a racy vented look that
matches the similar theme found everywhere on the bike.
Fits: All ’08-’10 Can-Am Spyder RS Models Only
8716 Handlebar Accents (pr) $29.99
a
Bc
8 7 7 . 3 7 0 . 3 6 0 4
6263
8716
8716
27w w w . k u r y a k y n . c o m
c a n - a m a c c e s s o r i e s
4457
8848
d
d
g
fe
ChooSE thE pEGS you waNtDiscover our Full Line
of Peg Styles! See pgs 52-53 4464
4471
P/N 4037 Brake Pedal Pad
P/N 8848 Rear Peg Adapter
P/N 7939 Front Peg Adapter
1” FOrWArD
d
e
g
f
peg adapters for Mounting Footpegs
Add comfort & style with Küryakyn foot pegs using these motorcycle specific
adapters. Passengers gain extra comfort with a less cramped 1” forward foot position.
Simply select your desired peg style (pgs 52-53) & bolt them on!
Fits: All ’08-’10 Can-Am Spyder rS Models Only (adapter fitments are for stock
OEM peg mounts)
7939 Front Peg Adapter (pr) $21.99
8808 Front Splined Peg Adapter (pr) Note: Splined Adapters required for SwingWing Pegs, Liberator Pegs, & Floorboards.
$21.99
8848 Rear Peg Adapter (pr) Note: Will not work with hard saddlebags that have replacement passenger peg mounts.
$21.99
widowtm rear axle capsMorph your Spyder into a terrorizing predator & let these chrome
Widows crawl over your axle caps.
Fits: All ’08-’10 Can-Am Spyder rS Models Only
8949 Widow Rear Axle Caps (pr) $29.99
widow® pegsSet your Spyder apart from the crowd with fully custom Widow foot pegs.
4492 Widow Peg without Adapter (pr) $93.99
Note: Requires Peg Adapter (shown below).
brake pedal pad coverQuickly & easily chrome your stock rubber
pad with this beautiful clam-shell cover.
Fits: ‘08-’10 Can-Am Spyder RS Models Only (Right toe brake &
left heel parking brake)
4037 Brake Pedal Pad Cover (ea) $26.99
8 7 7 . 3 7 0 . 3 6 0 428
spo
rt
bik
e
Grips | pg 28
| pg 29
Mirrors | pg 30
Pegs | pg 31
Chrome | pg 32
Grip & Handlebar
Accessories
SpoRt bikE GRip FitmENtFits: Universal: 7/8” handlebars with OEM grips no longer than 4-5/8”
Honda: All ‘00-‘10 CBR600, ‘04-’10 CBR1000RR, ‘00-‘01 CBR929, ‘02-‘03 CBR-
954RR, ‘00-‘03 CBR1100 XX, ‘00-‘07 RC51 & ‘00-‘08 Interceptor (VFR800)
Kawasaki: All ‘00-‘10 ZX-6R, ‘00-‘03 ZX-7R, ‘02-‘03 ZX-9R, ‘04-‘10 ZX-10R,
‘00-‘01 ZX-11R, ‘00-‘05 ZX-12R, ‘06-‘10 ZX-14R & ‘10 Z1000
Suzuki: All ‘99-‘09 Hayabusa (GSX1300R), ‘00-‘09 GSX-R600, ‘00-‘09 GSX-R750
& ‘01-‘09 GSX-R1000
Yamaha: All ‘00-‘10 YZF-R6/R6S/600R, ‘00-‘10 YZF-R1/1000R & ‘01-‘10 FZ1/1000
iSo®-GRipS U.S. Patent D411,432
The aggressive seating position of modern sport bikes can cause significant pres-
sure & discomfort on the rider’s hands. These ISO-Grips with a slightly larger 1-5/8”
outside diameter offer a vibration isolating cushion for unmatched comfort &
reduced fatigue all in one hot looking grip.
Note: The vibration isolating rubber & the small additional grip weight eliminates the need for your stock bar end weight.
tRaNSFoRmER GRipStm Patent Pending
Race bike inspired styling doesn’t have to
mean aching wrists, sore palms, & numb
fingers. Soft black rubber pads mean comfort
& a solid feel. Interchangeable medallions
supply the attitude!
hustler grips By
Simple & clean style in a comfortable yet solid feeling grip.
Create the perfect contrast of smooth chrome and soft
rubber to really bring your bike to life. Interchangeable
throttle mechanisms included to fit an array of late
model sport bikes.
6234 ISO-Grips for Sport Bikes (pr)
$69.99
6237 Transformer Grips for Sport Bikes (pr)
$89.99
8717 Hustler Grips for Sport Bikes (pr)
$49.99
w w w . k u r y a k y n . c o m 29
g r i p & h a n d l e b a r a c c e s s o r i e s
iSo®- throttle boss Relax your grip on
the throttle & let your
palm assist with throttle
control. A must have for
those long hauls!
Fits: ISO-Grips (Right or Left)
6250 ISO-Throttle Boss (ea)
$17.99
6253 ISO-Throttle Boss (pr)
$31.99
stilettotm end capsPointed end caps that double as bar end weights for updating your
Küryakyn Grips.
Fits: All Küryakyn ISO- & Transformer Grips (except Hustler Grips)
6249 Stiletto End Caps (pr) $39.99
ChRomE LEvERS for Sport Bikes
Why are these chrome beauties better than your old, nicked up,
aluminum or, worse yet, black levers? They’re Chrome! These
fit right into the OEM perches & since chrome is undeniably cool,
treat yourself to these levers!
See motorcycle specific chart (below) for specific applications
Note: P/N’s 6303, 6304, 6307, & 6312 requires re-use of OEM bushing in clutch lever.
A l s o A v a i l a b l e . . .
universal throttle boss Regardless of what you ride, make riding easier & more
comfortable with our Universal Throttle Boss! See Pg 49
P/n 6251
P/N Description Price
Honda
6301 ’02-’06 CBR600 (All Models) (pr) $39.99
Kawasaki
6303 All ’05-’08 ZX-6R & ‘06-’07 ZX-10R (pr) $39.99
6304 All ’08-’10 ZX-10R , All ‘09-‘10 ZX-6R & ‘10 Z1000 (pr)
$49.99
6305 All ’06-’10 ZX-14R ‘08-’10 Concours 1400 (pr)
$49.99
handlebar risers with Front Lowering Blocks byEasily obtain a more comfortable riding position by raising
your handlebars 1” & back 1/2”. Great for shorter riders &
allows you to lower your front end 1” if desired.
Fits: ‘08-’10 Kawasaki Ninja 250R
8779 Black Anodized Handlebar Risers (pr)
$59.99chrome switch housings for Suzuki by Replace your drab stock housings with the bling
of true triple-chromed metal for a true transformation!
8713 Includes Switches (pr) Fits: All ‘03-’07 Hayabusa (GSX1300R) The Following Require Hardwiring: ‘99-’02 Hayabusa (GSX1300R), ‘96-’03 GSX-R750, ‘97-’03 GSX-R600, ‘97-’01 TL 1000S, ‘98-’03 TL 1000R, ‘01-’02 GSX-R1000
$124.99
8714 Re-uses Stock Switches (pr) Fits: All ‘08-’09 Hayabusa (GSX1300R), ‘07-’08 GSX-R1000, & ‘08-’09 GSX-R600/750
$179.99
P/N Description Price
Suzuki
6311 All ’99-’09 Hayabusa (GSX1300R) Models (pr)
$39.99
6312 All ’06-’09 GSX-R600/750, & ‘05-’06 & ’09 GSX-R1000 Models (pr)
$39.99
Yamaha
6307 All ’04-’10 YZF-R1 & ‘07-’10 YZF-R6 (except YZF-R6S) (pr)
$39.99
grip end weights for Küryakyn Grips
Quickly install our chrome end weights to the end of each grip & add
mass & length to further reduce high amplitude handlebar vibration.
Fits: All Küryakyn ISO- & Transformer Grips (except Hustler Grips)
6238 Grip End Weights (pr) $39.99
6338 Grip End Weights (ea) $21.99
6238
more throttle
assists pg 44
30
m i r r o r s
8 7 7 . 3 7 0 . 3 6 0 4
miRRoR mouNtS for Sport Bikes
Replace your stock bug antenna mirrors & add the personal style you want with
these adjustable Mirror Mounts for Sport Bikes. Simply select & add custom
Küryakyn Mirrors or any other mirrors that mount with a 5/16-18 bolt.
Fits: Universal: Mirror bolts with spacings from 1” to 1-5/8” apart
Honda: All ‘00-‘10 CBR600, ‘00-‘01 CBR929, ‘02-‘03 CBR954RR, ‘04-’10 CBR1000RR,
‘00-‘03 CBR1100 XX, ‘00-‘07 RC51 & ‘00-‘10 Interceptor (VFR800)
Kawasaki: All ‘00-‘10 ZX-6R, ‘04-‘10 ZX-10R, & ‘06-‘10 ZX-14R
Suzuki: All ‘99-‘09 Hayabusa (GSX1300R), ‘00-‘09 GSX-R600, ‘00-‘09 GSX-R750 &
‘01-‘09 GSX-R1000
Yamaha: All ‘00-‘10 YZF-R6/R6S/600R, ‘00-‘10 YZF-R1/1000R & ‘01-‘10 FZ1/1000
1458 Universal Mirror Mounts for Sport Bikes (pr) $59.99
Note: Installation requires mirror to be mounted on the outside of the fairing. Mirror Mounts do not accommodate wiring for mirrors with turn signals. Extremely large billet mirrors may weigh more than stock mirrors & are not suggested for use with “stunt” style riding.
zombiEtm miRRoRSWe’ve taken your run-of-the-mill skull & added 35% more angst & 20%
more anguish to make these the nastiest mirrors on the street.
Mirror Dim: 3” in Diameter
Fits: Mirror Mounts (Left) required for installation (P/N 1458)
1450 Zombie Mirrors (pr) $149.99
1-1/4”
3”
1-1/2”
1448
1458
Fully
Adjustable!
Honda
CBR 600 F4/F4I/RR ‘99-’10
CBR 929 ‘01-’02
CBR 954 ‘02-’03
CBR1000 ‘04-’07
Suzuki Year
GSX-R600 ‘97-’09
GSX-R750 ‘96-’09
GSX-R1000 ‘01-’09
Hayabusa (GSX1300R)
‘99-’09
TL1000 R/S All
SV650S ‘99-’09
SV1000S ‘03-’07
Kawasaki
ZX-6 /R ‘00-’10
ZX-9 ‘94-’03
ZX-10 Note: Does not fit ZX-12 or ZX-14 Models.
‘04-’10
8718
SCythEtm ii miRRoRSThe Scythe II Mirrors will clearly cut all competitors down to size!
The Rambo Knife shaped mirror head provides a sleek streamlined
profile & is fitted with top quality optical glass.
Fits: Mirror Mounts (Below Left) required for installation (P/N 1458)
1448 Scythe II Mirrors (pr) $139.99
tRidENt miRRoRS for sport bikeIn your face bling every time you get on your bike. The beefy yet light 3 bar
mirror stem with double adjustment points & a swivel head, these mirrors
lock in just where you want. The convex lens offers increased viewing
with approximately 9” from mount to mirror end.
Mirror Dims: 4-3/4” Wide x 2-1/8” Tall (Convex Lens)
Fits: See Fitment Chart (Below)
1496 Trident Mirror (pr) $129.99
Mirror FitmentFits: Universal for Fairing
Mount in stock mirror location
with mounting holes between
1” & 1-5/8” apart. Mounting
base is 1-1/4” by 2-5/8”.
Note: These mirrors do not support turn signal function. Replacement turn signal &
additional hardware may be required for these applications.
1496
billet Convex mirrors by Form & function from a mirror
that looks great & installs
with no modifications.
Available in an anodized
black or brilliant chrome
finish to give your bike
the ultimate custom
look. Fully adjustable
base allows for perfect
positioning & a secure fit.
Fits: See Fitment Chart (Left)
8718 Black Anodized Mirrors (pr) $129.99
8719 Chrome Mirrors (pr) $129.99
31w w w . k u r y a k y n . c o m
p e g s
8788
8786
8785
8787
taNk pRotECtoRSFits: Universal applications
8785 Zombie (ea) $26.99
8786 Chauvinist (ea) $26.99
8787 Spider Babe (ea) By Lethal Threat Designs
$26.99
8788 Skull Jester (ea) By Lethal Threat Designs
$26.99
SupER LizaRdS for Sport Bikes
Your sport bike’s aggressive lines & large engine
vent openings can sometimes be overlooked. Accent
those great lines & areas with our Super Lizard
Lights! Includes six Super Lizard Lights & all the
wiring necessary to mount the light exactly where
you want it! Simple peel-&-stick installation with
plug-&-play wiring makes installation quick & easy.
5024 Super Lizards for Sport Bikes (kit) Note: Contains 6 Lights & Controller
$329.99
Three Spectacular Modes:• Steady Illumination
• Strobe w/Adjustable Speed• Paint Mode: Continuously Cycle Through All Seven
Colors
miNi daGGER pEGS Cut up the road by adding these sinister Mini Dagger Pegs to your bike.
The soft rubber pads add extra comfort while the brilliant chrome &
skull shines bright. (1-1/8” wide x 3-1/2” long)
Fits: Universal for driver or passenger, requires Küryakyn motorcycle
specific Peg Adapters for installation (below)
7520 Mini Dagger Pegs without Adapters (pr)
$69.99
7512 Mini Dagger Pegs Replacement Rubbers (set)
$16.99
1492 Replacement Zombie Emblems (pr)
$14.99
Peg Adapters Years Front Rear Front Splined
KawasakiAll Ninja 250 ’08-’10 8830 8845 8813
All Ninja 250 ’00-’07 8830 8809 8813All ZX-6R ’00-’10 8830 8845 8813All ZX-7R ’00-’03 8830 8845 8813All ZX-9R ’02-’03 8830 8845 8813All ZX-10R ’04-’10 8830 8845 8813All Z1000 ’10 8830 8845 8813All ZX-11R ’00-’01 8830 8845 8813All ZX-12R ’00-’05 8830 8845 8813All ZX-14R ’06-’10 8830 8845 8813
All Concours 1400 ’08-’10 8830 8845 8813SuzukiAll GSX-R600 ’00-’09 7939 8822 8808
All GSX-R750 ’00-’09 7939 8822 8808All GSX-R1000 ’01-’09 7939 8822 8808All SV650 & SV1000 ’00-’09 7939 None 8808All Hayabusa (GSX1300R) ’08-’09 7939 8822 8808All Hayabusa (GSX1300R) ’99-’07 7939 8842 8808
YamahaAll YZF-R6/R6S/600R ’99-’10 8802 8843 8827
All YZF-R1/1000R ’00-’10 8802 8843 8827All FZ1/1000 ’01-’10 8802 8843 8827All VMax ‘85-’08 8810 8811 8814
All VMax ‘09-’10 8802 8843 8827
Peg Adapters Years Front Rear Front Splined
HondaAll CBR600 ’00-’08 7939 8844 8808
All CBR600RR ’09-’10 None 8844 NoneAll CBR929 ’00-’01 7939 8844 8808All CBR954RR ’02-’03 7939 8844 8808All CBR1000RR ’04-’10 7939 8844 8808All CBR1100 XX ’00-’03 7939 8844 8808All Interceptor (VFR800) ’00-’10 7939 8844 8808
All ST1300 ’03-’10 7939 8844 8808
7-Colors in one!P/n 4476
D o n ’ t M i s s . . .
Custom küryakyn pegs Many styles to choose from to suit any rider!
Simple, Loud, Understated - Something for everyone! See PG 54
$21.99Sold in Pairs
®
8813
peg adaptersKüryakyn Footpegs are a 2-part system for convenience
& easy installation. Simply select the footpegs you
desire & the appropriate motorcycle specific Adapter for
your bike.
Note: Splined Adapters are only intended for specific Küryakyn Pegs & are noted where applicable. (For example: P/N’s 4596 & 4467 require Splined Adapters). Note: Cornering clearance may be reduced by larger footpegs.Note: Adapter fitmets are for stock OEM peg mounts.
8822
32 8 7 7 . 3 7 0 . 3 6 0 4
c h r o m e
NECk top CovER for Hayabusa Patent Pending
Adding chrome just got easier. Now you can cover those unsightly
tank tabs, frame welds, wiring & bearing cups without tearing
down the entire bike. Not only will this make your bike look good,
it also makes cleaning easier than ever before.
Fits: All ‘99-’07 Hayabusa (GSX1300R) Models
8909 Chrome Neck Top Cover (ea) $49.99
top triple clamp coversCloak your top triple clamp with brilliant chrome that installs in
seconds & offers the illusion of speed even while sitting still.
8710 Fits: All Yamaha ’04-’08 YZF-R1 Models & all ’06-’10 YZF-R6 Models (except YZF-R6S or YZF600R)
$59.99
ChRomE iNtakE tRim for Hayabusa
Patent Pending
Take your bike to the next level by adding
chrome in places unheard of until now.
This is the perfect chrome accent to set
off the front end by adding an aggressive yet
stylish appearance to the side marker/air intake
area. Installs in seconds & goes great with a set of
Küryakyn mirrors.
Fits: All ‘99-’07 Hayabusa (GSX1300R) Models
8901 Chrome Intake Trim (pr) $89.99
FaiRiNG Exit vENt aCCENt for Hayabusa Patent Pending
Get ready for the latest trend in sport bike styling,
chrome accenting in key areas without over doing it. This
is the perfect example, offering just the right amount of
chrome that will really set your bike apart from the rest. Made
from light weight injection molded ABS with the ease of peel-&-stick
installation, there is no compromise.
Fits: All ’99-’07 Hayabusa (GSX1300R) Models
8908 Fairing Exit Vent Accent (pr) $79.99
8901
Caliper Cover (P/N 8703
Also Shown
8908
8908
8901
Renderings Shown
Rendering Shown
Rendering Shown
Rendering Shown
8702
LowER FoRk
CovERS
Transform your high-tech
lower forks into a radical
fully customized look in minutes. These light
weight covers bolt right on & avoid the expense,
work, & potential problems with chroming your
stock parts. Your new front end couldn’t look
any better.
Fits: All ‘99-’07 Hayabusa (GSX1300R) Models
8702 Lower Fork Covers for Hayabusa (pr)
$99.99
fork caps30mm Fork Nuts Fits: Kawasaki: ‘00-’05 ZX-12R & ‘03-’04 ZX-6R/636 Yamaha: ‘99-’01
R1 Suzuki: ‘01-’02 GSX-R1000, All TL1000R/S, & ‘99-’07 Hayabusa with
aftermarket Lowering Triple Clamp
8706 Chrome (pr) $59.99
8708 Black Contrast Cut (pr) $59.99
24mm Fork Nuts Fits: Kawasaki: ‘04-’10 ZX-10R & ‘06-’010 ZX-14R Yamaha: ‘02-’08 R1 &
‘05-’08 R6 Suzuki: ‘06-’09 GSX-R600/750, ‘03-’09 GSX-R1000, All B-King,
‘08-’09 Hayabusa with aftermarket Lowering Triple Clamp
8707 Chrome (pr) $59.99
8709 Black Contrast Cut (pr) $59.99Note: Not compatible with Küryakyn Top Triple Clamp Cover (P/N 8711).
triceptor fender accent Mount on the edge of your fender or pushed
back. Simple peel-&-stick installation.
Fits: Yamaha: All YZF-R1 & FZ1, ‘08-’10 YZF-R6
Models
Honda: ‘04-’07 CBR1000RR
Suzuki: All GSX-R600/750/1000 & all
Hayabusa (GSX1300R)
Universal: 4” or wider style fenders (does not
fit fenders with flat center width)
7340 Triceptor Fender Accent (ea) $41.99
33w w w . k u r y a k y n . c o m
taillight top trim Patent Pending
Everyone will be staring at the chrome on the tip of your
tail as you pass them by. This baby installs right on your
tail section & smoothes the gap to the tail light while
covering up those blocky letters. Your back end never
looked so good.
Fits: All ’99-’07 Hayabusa
(GSX1300R)Models
8929 Taillight Top Trim (ea)
$39.99
taNk top tRim for Hayabusa U.S. patent D575,199
Bling is King & so is the Hayabusa, so show yours some love with the
Chrome Top Tank Trim. This piece will not only show off the smooth
lines of your bike but it will also give your ride that show stopping
appeal like no other. Installation is a snap, simply peel-&-stick.
Fits: All ’99-’07 Hayabusa (GSX1300R) Models
8910 Tank Top Trim (pr) $49.99
front brake reservoir capReplace your black stock cover
with luscious chrome.
Fits: Front Brake Reservoir Covers
Kawasaki: ’06-’10 ZX-14 Models,’04-
’10 ZX-10 Models, ’99-’10 ZX-6 Models,
Rear Reservoir Cover on Ninja 250
Honda: All ‘06-’10 CBR1000RR & all ‘07-’10 CBR600RR
Yamaha: All ‘05-’10 YZF-R6, all ‘04-’10 YZF-R1
Suzuki:’01-’09 GSX-R1000, ‘96-’09 GSX-R750, ‘97-’09 GSX-R600
7822 Front Brake Reservoir Cap (ea) $21.99
8909
8910 c
c
c
B
B
a
a
chrome clutch top cover for HayabusaPatent Pending
Chrome the stock (scratched) housing
in minutes. Made from injection
molded ABS - light weight & installs
right over the factory housing.
Fits: All ’99-’07 Hayabusa (GSX1300R)
Models
8920 Chrome Clutch Cover (ea)
$99.99
boomerang frame covers for Hayabusa Patent Pending
Chrome your frame without the expensive,
intense labor, & potential to compromise
the structural integrity of the frame. These
beauties lay right over your frame & are made
from a light weight injection molded ABS to
hug tight to your frame.
Fits: All ’99-’07 Hayabusa (GSX1300R)Models
8911 Boomerang Chrome Frame Covers (pr)
$299.99
front & Rear footpeg mount covers for HayabusaPatent Pending
Gain the perfect blend of smooth chrome &
scuff protection for driver peg position. No
need to buy expensive mounts or send parts
to the chrome shop.Just transform to cool
chrome with these light weight covers.
Fits: All ’99-’07 Hayabusa (GSX1300R) Models
8914 Rear Set Covers (Driver) (pr) $89.99
8915 Passenger Peg Mount Covers (pr)
$79.99
Renderings Shown
Renderings Shown
Fairing Exit Vent Accent - pg 32
8 7 7 . 3 7 0 . 3 6 0 434
peg mounted license plate bracket with L.E.D. Lighted Frame by
Relocate your tag right inside the left rear
passenger peg. Your plate stays horizontal,
clean, & legal. The L.E.D. light & brilliant
chrome makes it pop.
8748 Fits: Kawasaki: ‘06-’10 ZX-14R Suzuki: All TL1000S/R, ‘07-’09 GSX-R1000, ‘03-’07 SV1000S, ‘08-’09 Hayabusa (GSX1300R)
$179.99
8749 Fits: All ‘99-’07 Hayabusa (GSX1300R)
$179.99
see küryakyn for coordinating extended stainless steel rear brake line
For use with Swingarm Extensions.
Kawasaki
8726 Fits: ‘06-’10 ZX-14R (Requires P/N 8739 & longer chain)
$299.99
8727 Fits: ‘06-’10 ZX-10R (Requires P/N 8740 & longer chain)
$299.99
8728 Fits: ‘00-’10 ZX-6R/636, ‘03-’07 ZZR600, & ‘00-’03 ZX-9R (Requires Brake Line & longer chain)
$299.99
Note: All Swingarm Extensions require Brake Line (online) & longer chain for proper installation.
* Raw Finish.
billet lowering kickstand byIf your bike is lowered, let it stand in
style & confidence with these ruggedly designed &
CNC machined Billet Kickstands. Bolt right on.
Hayabusa Fits: ‘99-’09 Hayabusa Models
8765 Chrome (ea) $109.99
8766 Black Contrast Cut (ea) $109.99
Kawasaki Fits: ‘06-’10 ZX-14R, ‘00-’10 ZX-6R/636, ‘94-’03
ZX-9R, ‘04-’10 ZX-10R, ‘00-’05 ZX-12R, & ‘08-’10
Ninja 250R
8767 Chrome (ea) $119.99
8768 Black Contrast Cut (ea) $109.99Note: Suggest for use with Lowering Links.
lowering links by Low Riders are the
extreme of cool. Roaring
Toyz created strong & durable
lowering links with maximum
adjustability & quality mounting points. Coordinate
with Lowering Kickstand (sold separately) &
completely morph your ride.
8770 Fully Adjustable Fits: ‘99-’09 Hayabusa (GSX1300R)
$79.99
8771 Black Anodized (5-hole) Fits: ‘99-’09 Hayabusa (GSX1300R)
$39.99
8773 Black Anodized (5-hole) Fits: Kawasaki: ’00-’03 ZX-9R, ’00-’05 ZX-12R, ’00-’10 ZX-6R/RR/636, ’03-’07 ZZR600, ’04-’10 ZX-10R, ’96-’03 ZX-7R Suzuki: ’05-’06 GSX-R1000 Yamaha: ’99-’07 YZF600R
$39.99
8774 Black Anodized (4-hole) Fits: ‘06-’09 GSX-R600/750 & ‘07-’08 GSX-R1000
$124.99
8776 Black Anodized (5-hole) Fits: ‘08-’10 Ninja 250R
$39.99
8777 Black Anodized (3-hole) Fits: ‘06-’10 ZX-14
$69.99
zombietm medallionsStick them on your
motorcycle, toolbox, car,
computer monitor-anywhere you
think their sinister faces will brighten your day.
1491 Large Zombie (pr) Requires 2” of flat surface for mounting
$15.99
1492 Small Zombie (pr) Requires 1” of flat surface for mounting Note: Replacements for P/N’s 7520 & 7521.
$14.99
3797 Zombie Medallion (ea) Requires 4-1/2” of flat surface for mounting
$17.99
more luggage found online
swingarm extensions byForce your full power straight to the ground &
launch off the line with these trick black anodized
long-style Swingarm Extensions. Custom machined
from the best aircraft quality 6061T6 billet aluminum
& fully adjustable from 2” to 8”. Coordinate with
Stainless Steel Brake Lines (below) & a longer chain
for proper installation.
Suzuki
8721 Fits: ‘08-’09 Hayabusa (GSX1300R) & ‘03-’07 SV1000 (Requires Brake Line & longer chain)
$299.99
8722* Fits: ‘99-’07 Hayabusa (GSX1300R) (Requires P/N 8737 & longer chain)
$299.99
8723 Fits: ‘99-’07 Hayabusa (GSX1300R) (Requires P/N 8737 & longer chain)
$299.99
8724 Fits: ‘06-’09 GSX-R600/750 (Requires P/N 8738 & longer chain), ‘05-’08 GSX-R1000 (Requires Brake Line & longer chain)
$299.99
8725 Fits: ‘09 GSX-R1000 (Requires P/N 8735 & longer chain)
$299.99
gas cap coversHere’s a direct
replacement that’s
50% lighter with an 1/8
turn quick-opening top
& proper venting. Available
Chrome or Black Anodized.
Fits: Yamaha: ’97-’05 YZF-600R, ’99-’08 R6 &
’98-’10 R1
Kawasaki: ’04-’10 ZX-10R, ’98-’03 ZX-9R, ’00-’08
ZX-6R/636 Models, ’06-’10 ZX-14R & ’03-’07 ZZR600
Honda: ’93-’99 CBR900, ’95-’06 CBR600 F3/F4/F4I,
’03-’06 CBR600RR, ’00-’03 CBR929 & 954RR Models
& ’04-’10 CBR1000RR
Suzuki (3-hole): ’08-’09 Hayabusa (GSX1300R),
’04-’09 GSX-R750, ’04-’09 GSX-R600, ’03-’09
GSX-R1000, ’03-’08 SV650/650S & ’03-’07 SV1000S
Suzuki (4-hole): ’99-’07 Hayabusa (GSX1300R),
’98-’06 Katana (GSX-600), ’98-’06 Katana (GSX-750),
’97-’03 GSX-R600, ’96-’03 GSX-R750, ’01-’02
GSX-R1000 & All TL1000R/S
Chrome
8791 Fits: Kawasaki (3-hole) $74.99
8793 Fits: Yamaha $74.99
8795 Fits: Honda $74.99
8797 Fits: Suzuki (4-hole) $74.99
8799 Fits: Suzuki (3-hole) $74.99
Black Anodized (Chrome Center)
8790 Fits: Kawasaki (3-hole) $74.99
8792 Fits: Yamaha $74.99
8794 Fits: Honda $74.99
8796 Fits: Suzuki (4-hole) $74.99
8798 Fits: Suzuki (3-hole) $74.99
3797
1492
1491
lig
htin
g
Driving Lights | pg 35
Silver Bullets | pg 37
Taillights & Turn Signals | pg 38
Run-Turn-Brake Controllers | pg 40
Accent Lights | pg 41
FRamE mouNtEd dRiviNG LiGhtS Patent Pending
Light up the night with our slick new Frame Mounted Driving lights. These luminous lights use a 3” diameter streamlined housing with super white
H3 bulbs that provide extra light where it is needed most. Light can be mounted virtually anywhere on the down tubes & can be adjusted with
ease. Increase your visibility to others without compromising the style & function of your ride.
5016 For 1-1/8" & 1-1/4" Bar (pr) Fits: Universal for1-1/8” & 1-1/4” tube. (Requires 3/4” clearance around tube by 3/4” straight tube length for mounting) Yamaha: All ‘98-’10 V Star 650, ’99-’09 V Star 1100, ’99-‘10 Road Star 1600/1700, ’06-’10 Roadliner & Stratoliner, & ’08-’10 Raider Models
$299.99
5017 For 1-3/8" & 1-1/2" Bar (pr) Fits: Universal for1-3/8” & 1-1/2” tube. (Requires 3/4” clearance around tube by 3/4” straight tube length for mounting) Honda: ‘09-’10 Fury Models & ‘10 VT1300 Custom Line (Sabre, Stateline & Interstate) requires cutting plastic radiator grate for clamp clearance.
$299.99
Note: We suggest Universal Wiring & Relay Kit for easy installation - pg 36.
clamp-on driving lightsWe’ve combined our super sleek 3” Halogen Bullet
Driving Lights with an innovative mounting kit to
allow simple installation on exposed 39, 41, 43 or
49mm fork tubes. Unique clamp-on brackets place
the driving lights in front of or to each side of the
fork tubes for clearance with other accessories, or
to get just the look you want.
Note: We suggest Universal Wiring & Relay Kit for easy installation - pg 36.
Front Mount
5012 Fits: 39mm & 41mm Fork Tubes (set) $299.99
5014 Fits: 43mm & 49mm Fork Tubes (set) $299.99 Side Mount
5013 Fits: 39mm & 41mm Fork Tubes (set) $299.99
5015 Fits: 43mm & 49mm Fork Tubes (set) $299.99Note: For applications with OEM fork shrouds we suggest Constellation Driving Lights Bar (P/N 5001) pg 36. Not for use with Küryakyn Windshields or Fairings.
See Quick reference Chart for Popular Fork Tube Sizes - pg 38
w w w . k u r y a k y n . c o m
m e t r i c c r u i s e r s
35
5012
5013
36 8 7 7 . 3 7 0 . 3 6 0 4
mounting brackets for Driving Light Bar & Constellation Driving Light Bar
4002 Fits: Honda VTX1800C/R/S/T/F, VTX1300C/R/S, Valkyrie, Shadow 750 Aero/ Phantom (ea)
$20.99
4003 Fits: Honda 750 Ace, 1100 Sabre, 1100 Aero (ea)
$20.99
4004 Fits: Yamaha Road Star (except Warrior) (ea)
$20.99
4005 Fits: Yamaha V Star 650 & 1100 Custom/Classic (ea)
$20.99
4006 Fits: Kawasaki 800 Drifter, Suzuki Marauder 800, Volusia 800, Intruder 800 & C50 (Without Windshield) (ea)
$20.99
4008 Fits: Kawasaki All Vulcan 900 Models, Vulcan 1500 (Carb only), 800 Classic & ’01-Earlier Honda 1100 Spirit (ea)
$25.99
4009 Fits: ‘01-Earlier Honda 1100 Spirit, Kawasaki Vulcan 1500 (Carb only) & 800 Classic (ea)
$22.99
4010 Fits: All ’08-’10 Yamaha Raider Models (ea)
$25.99
4003
4002
4004
4006
4008
dRiviNG LiGht baRThis is one of the more enlightening products you can add to your
motorcycle. The bar is die-cast & chrome-plated for stunning good
looks. Halogen Silver Bullets are mounted on top to function as
driving lights. A band of high-intensity amber L.E.D.’s start in front
& wrap around each end of the bar & function as both running
lights & auxiliary turn signals. A variety of mounting brackets (sold
separately) are available to fit most of today’s popular Cruisers.
Fits: Requires Motorcycle Specific Mounting Bracket (Below)
4001 Driving Light Bar (ea) $299.99
CoNStELLatioN dRiviNG LiGht baR Patent Pending
Blaze on through the night with our Constellation Driving Light Bar! This bar is different from most other
offerings; it’s not just a clumsy bracket to hang garden tractor lights from. It’s actually a radically styled
component that flows with it’s stretched, streamlined bezels that create cool, not clutter. Turn signals come with
smoked lenses with Amber bulbs. Mounting brackets for specific applications are required & we suggest our
Universal Lighting & Relay Kit (below) to simplify proper wiring.
Fits: Requires motorcycle specific mounting bracket (see below)
5001 Constellation Driving Light Bar (ea) $369.99Note: Installation of the product may be limited with OEM turn signals in stock location for some applications. We suggest universal wiring & relay kit for easy installation (below).
2-5/16” Driving Lights
3” Driving Lights with 2-1/4” Turn Signals
universal wiring & relay kitThis kit includes the switch, relay, &
universal wiring harness to make wiring
driving lights easy & avoids overloading
headlight circuits.
2328 Universal Wiring & Relay Kit (kit)
$31.99
convert
these
turn signals
to l.e.d!
pg 39
adjustable width &
front to rear
position
Important: To avoid overloading existing circuits we recommend using our Wiring & Relay Kit (P/N 2328 - pg 89) when connecting the Silver Bullets. L.E.D. auxiliary turn signals are not D.O.T. approved & may require a Load Equalizer (sold separately - pg 96). This Light Bar is compatible with most windshields, but does not fit with Memphis Fats or Küryakyn Fairing for VTX applications. For all applications, the Light Bar is positioned as illustrated in the above image. Before ordering please take a moment to visualize potential interference between our bar & your windshield.
Note: Installation of this product may be limited with OEM Turn Signals in stock location for some applications.
Note: We suggest Universal Wiring & Relay Kit for easy installation - Below.
D r i v i n g l i g h t s
37w w w . k u r y a k y n . c o m
s i l v e r b u l l e t s
2-5/16”
3-1/4”
2320 2305
1610 1610
1-5/8”
2-1/2”LARGE small
unlit lit
Combine with p -Clamps, two-p iece Fork mounts, adapter Studs, or Custom
brackets of your Creat ion — - the opt ions are L imitless !
SiLvER buLLEtS with 5/16”-18 mouNtiNG boLtWiring exits the light through a hole in the
body behind the mounting boss.
Halogen Style: Includes Clear Lenses Only
2303 Small (pr) $93.99
2319 Large (pr) $103.99
L.E.D. Reflector Bulb Style: Includes Clear Lenses Only
1613 Small Amber; Run-Turn Dual Function (pr) $119.99
1614 Small Red; Single Function (pr) $119.99
1615 Small Red; Run-Turn Dual Function (pr) $119.99
Ref Lector Style L.E.d. Silver bullets:
These L.E.D. bulbs provide low-draw & rapid illumination
& give you the stunning good looks of a faceted reflector.
halogen Silver bullets:
Küryakyn Halogen Silver Bullets are
assembled with high-shock, heavy duty
single filament 20 watt quartz halogen
bulbs. We recommend them for use as auxiliary
driving lights to help riders see & be seen.
1610
SiLvER buLLEtS with 3/8”-16 hoLLow mouNtiNG boLt Wiring exits the light through the mounting bolt.
Halogen Style: Includes Clear Lenses Only
2305 Small (pr) $93.99
2320 Large (pr) $103.99
L.E.D. Reflector Bulb Style: Includes Clear Lenses Only
1610 Small Amber; Run-Turn Dual Function (pr) $119.99
1611 Small Red; Single Function (pr) $119.99
1612 Small Red; Run-Turn Dual Function (pr) $119.99
1613
1614/15
L.E.d. miNi buLLEtSUpdated brighter universal Mini Bullets can be used as marker
lights or auxiliary turn signals. Their intensity greatly exceeds
their small size. Each style is available with red or amber
L.E.D.’s. The power lead exits the light through the center of
the hollow 3/8”-16 x 5/8” mounting bolt; this provides a very
sanitary installation. Can also be used with our Bullet Light
Mounting Kit (P/N 2289) - pg 39.
Size: 1-1/4” Diameter, 3” Length, 3/8” Stand-off
2500 Amber (pr) $79.99
2501 Red (pr) $79.99
Note: Load Equalizer not included. Lights ground through mounting bolt.
1” x 2-3/4”
2501
2500
Silver Bullet Notes• halogen Silver Bullets: Single function L.E.D. Reflector Style Silver Bullets have a single power wire & ground through their mount.
• dual function l.e.d. reflector Style Silver Bullets: These bullets
have three wires; run, flash, & ground. They cannot be used for run-brake applications because they do not change intensity; they go from steady-on to on-off flash.
• There is no need to use a Load Equalizer with Halogen Silver Bullet
kits. Although Silver Bullet lights are extremely bright & highly visible, the installation of this product may be in violation of FMVSS #108 & not intended as a replacement for stock turn signals.
Installation Suggestions: • Halogen Silver Bullets for Driving Lights: Wire is easy with Universal Wiring & Relay Kit (P/N 2328 - pg 89).
• L.E.D. Turn Signal Updates: We suggest adding Diode Kit (P/N 4709 - pg 96) for applications with a single turn signal indicator light on the dash/handlebars.
• L.E.D. Turn Signal Updates: Some applications may result in fast flashing turn signals that can be slowed down with an additional load equalizer (pg 96).
38 8 7 7 . 3 7 0 . 3 6 0 4
t a i l l i g h t s & t u r n s i g n a l s
two-piece fork mountsOur sturdy, chrome-plated mounts are just
the ticket to attach Silver Bullets (or custom
lights using 5/16” mounting hardware) to fork
tubes. 39mm, 41mm, 49mm, & 54mm-58mm sizes
are offered to fit many popular Models.
2285 39mm Two-Piece Fork Mounts (pr) $59.99
2286 41mm Two-Piece Fork Mounts (pr) $59.99
2287 49mm Two-Piece Fork Mounts (pr) $59.99
2275 54mm-58mm Two-Piece Fork Mounts for Inverted Forks (pr)
$72.99
Cruiser Model Clamp Size 2-Piece Fork Mount P-ClampHondaVT1300 Custom Line (Sabre & Stateline) 41mm 2286 4014
VTX1800C/F/R/S/T w/o Chrome Forks 56mm 2275 N/AVTX1300C 41mm 2286 4014Shadow 750 Spirit/RS 41mm 2286 4014Shadow 1100 Spirit 41mm 2286 4014Shadow 600 VLX 39mm 2285 4014KawasakiMean Streak 1600 54mm 2275 N/AVulcan 900 Custom 41mm 2286 4014SuzukiM50 55mm 2275 N/AM109 58mm 2275 N/AYamahaRoad Star Warrior 54mm 2275 N/AV Star 1100 Custom 41mm 2286 4014V Star 650 Custom 41mm 2286 4014VictoryHammer 56mm 2275 N/AKingpin 56mm 2275 N/A
p-CLampSWorks great for mounting Silver
Bullets or other lights to frame
tubes or engine guards. Has a
5/16” mounting hole.
4018 7/8”-1” P-Clamp, Chrome (ea)
$20.99
4023 1-1/8”-1-1/4” P-Clamp, Black (ea)
$20.99
4024 1-1/8”-1-1/4” P-Clamp, Chrome (ea)
$20.99
4019 1-3/8”-1-1/2” P-Clamp, Chrome (ea)
$22.99
4017 1-1/2”-1-5/8” P-Clamp, Chrome (ea)
$22.99
4014 39mm-41mm P-Clamp, Chrome (ea)
$22.99
curved license plate frameThis slick Curved License Plate Frame was specially designed to
put the finishing touches on our Tombstone Taillight (P/N
4992). It accepts 4” x 7” plates & fastens neatly to the
existing holes on the base plate.
Fits: Slimline Low-Profile Tombstone Taillight
(P/N 4992) only
9157 Curved License Plate Frame (ea) $69.99
silver bulletsFits: Slimline Low-Profile Tombstone
Taillight (P/N 4992) only
1619 Small L.E.D. Red (pr) $155.99
SLimLiNE Low-pRoFiLE tombStoNE taiLLiGhtOld school tombstone taillight with
new L.E.D. run-brake technology in a
low profile housing. Select the Universal
Tombstone to mount directly to your fender or
select Tombstone with turn signal mounts that come with a license
plate light, mount, & accepts our sleek Silver Bullets (P/N 1619).
4990 Universal Tombstone Taillight (ea) $135.99
4992 Tombstone Taillight (ea) Yamaha: ’99-’03 Road Star, ’99-’09 V Star 1100 Classic, ’98-’10 V Star 650 Classic Kawasaki: ‘03-’08 Vulcan 1600 Classic/Nomad
$155.99
Note: Tombstone Taillight does not completely cover all existing mounting holes. Installation of this product may be in violation of FMVSS #108.
Non-
Shro
uded
Fro
nt F
ork
di
amet
er C
hart
4990
4992
4992
1619
9157
39w w w . k u r y a k y n . c o m
l.e.d. conversion kitsUpdate your Küryakyn Turn Signals with a Stunning look & Extreme Brightness
that you can’t get anywhere else. With L.E.D.’s built right into the lens,
these beauties install as easy as changing out the bulb. Load
Equalizer Included.
Front L.E.D. Turn Signal Inserts Fits: Küryakyn Driving Lights/Turn Signals P/N 5001,
5009, & 5011
4836 Amber Lens/Amber L.E.D.’s, 2 Circuit (pr)
$124.99
4825 Smoked Lens /Amber L.E.D.’s, 2 Circuit (pr)
$124.99
Rear L.E.D. Turn Signal Inserts Fits: Küryakyn Turn Signals P/N 9197, 5032
4822 Red Lens/Red L.E.D.’s 1 Circuit (pr) $124.99
4827 Smoked Lens/Red L.E.D.’s 1 Circuit (pr) $124.99
Plug-&-Play
installation!tuRN SiGNaLS with LiGhtEd CuRvEd LiCENSE pLatE for Road Star
Get ready for the compliments when you streamline the back fender &
add that custom classy look to your Road Star. Designed to flow around
your stock taillight, this kit fully replaces that stock bulky turn signal &
license plate bracket.
Fits: ’04-’10 Road Star 1700 Models (except Warrior)
9197 Turn Signals with Lighted Curved License Plate (kit) Note: Comes with standard 1156 clear bulb
$249.99
4814 Replacement Red 1156 Style Bulb (ea) $7.99Notes: Updates turn signals to red. Installation of this
product may be in violation of FMVSS #108.
Coordinate Your
Front Turn Signals by
Adding our Constellation
lights (pg 36) or Front
Turn Signals (P/n 5011)
found online
LiCENSE pLatE bRaCkEt with Red L.E.D. Turn Signals for VTX
Two vast improvements in one! The sleek License Plate Bracket
slides over the eye-sore version of a mount that comes standard
on the fender, plus replaces stock turn signals with Küryakyn’s
exclusive Silver Bullets. Our CAD-designed lenses with red
L.E.D. Silver Bullets provide exceptional, jewel-like illumination.
Comes with two different styled bezels.
Fits: ‘02-’07 VTX1800C & ‘04-’09 VTX1300C Models
9256 License Plate Bracket with L.E.D. Reflector Silver Bullets Includes both standard & visored bezels
$199.99
Note: Installation of this product may be in violation of FMVSS #108.
2 Bezel Styles
included
universal fender strut bullet light mounting kit for 3/8” Silver Bullets
Designed solely for installing our Silver Bullets or Mini Bullets on most
Metric Cruiser fender struts. Specialized hollow mounting studs are 3/8”-16
to mount bullet light & M8-1.25 on the other end to install in place of a
fender strut mounting bolt. (Confirm fender strut bolt before ordering)
2289 Bullet Light Mounting Kit (set) $12.99
Hollow Bolt
Hides Wiring
40 8 7 7 . 3 7 0 . 3 6 0 4
r u n - t u r n - b r a k e c o n t r o l l e r s
deep dish bezels with Lenses
Freshen up the dated look of your stock turn signals! Installs easily on the stock housing using
stock hardware. Select Smoked Lenses with colored bulbs or red & amber versions are also
available & retain stock bulbs.
Fits: Honda: ‘02-‘05 VTX1800R/S/C & ‘03-’09 VTX1300R/S/C/T Models, ‘09-’10 Fury, ‘10 VT1300
Custom Line (Sabre, Stateline & Interstate), ’04-’10 Shadow 750 Aero/Phantom/RS, ’02-’03
Shadow Ace 750, ’01-’07 Shadow Sabre 1100 (Also fits most other Honda Cruisers replacing OEM
turn signal lens 33401-MBA-612)
Kawasaki: ’04-’10 Vulcan 2000, ’03-’08 Vulcan 1600 Classic/Nomad (Also fits other Kawasaki
Cruisers replacing OEM turn signal lenses 23048-0001 or 23048-0002)
2270 Deep Dish Bezels with Smoke Lenses & Amber 2-Circuit Bulbs (pr)
$41.99
2271 Deep Dish Bezels with Smoke Lenses & Red Single-Circuit Bulbs (pr)
$48.99
2268 Deep Dish Bezels with Amber Lenses (pr) $39.99
2269 Deep Dish Bezels with Red Lenses (pr) $39.99
2270
tRipLE whammy tm RuN-tuRN-bRakE LiGht kit Make sure you’re seen on the open road & change your stock turn signals into Run-Turn-Brake lights with easy
Plug-&-Play installation. The optional flash mode flashes the taillights when the brakes are hit - catching the
attention of anyone behind you. This kit includes Plug & Play Run-Turn-Brake Controller & replacement lenses
or bulbs to update turn signals to red.
Honda
4601 Fits: All ‘02-‘03 VTX1800, ‘04 VTX1800C, all ‘03-‘05 VTX1300, ‘02-‘03 Shadow Ace 750 (set)
$109.99
4604 Fits: All ‘06-‘09 VTX1300R/S/C/T, ‘04-‘05 VTX1800R/S, ‘05 VTX1800C (set)
$109.99
For Both
Front & Rear!
plug & play run-turn-brake controllerChange your turn signals into running, turn & brake lights & light up
the back of your motorcycle for increased visibility. Select the plug
& play controller that connects directly into the stock OEM wiring
harness under the seat or universal for hardwire installation if your
bike is not listed below. Simply finish off the installation with the
required red turn signal lenses (or bulbs if you have clear lenses)
for the rear of your motorcycle.
Honda
4610 Fits: ‘04-’08 VTX1800R/S/T, ‘05-’07 VTX1800C, ‘06-’09 VTX1300R/S/C/T (set)
$93.99
4611 Fits: All ‘02-’03 VTX1800, ‘04 VTX1800C, all ‘03-’05 VTX1300, ‘02-’03 Shadow 750 Ace (set)
$93.99
Yamaha
4612 Fits: All ‘04-’10 Road Star 1700 (except Warrior), all ‘04-’09 V Star 1100 & All ‘04-’10 V Star 650, ‘07-’10 V Star 1300, ‘09-‘10 V Star 950 (set)
$93.99
Universal
4710 Run-Turn-Brake Controller for Metric Cruisers (ea) Note: This unit is for 12V lighting systems only.
$69.99
Note: Adds optional pulsating brake light function. Rear running lights on a motor vehicle must be Red. Installation of this product may be in violation of FMVSS #108.
Yamaha
4602 Fits: All ‘04-‘10 Road Star1700 (except Warrior), all ‘04-‘09 V Star 1100 & all ‘04-’10 V Star 650, all ‘07-’10 V Star 1300, ‘09-‘10 V Star 950 (set)
$109.99
4603 Fits: All Road Star 1600, all ‘98-‘03 V Star 1100 & 650 (set)
$109.99
Note: Triple Whammy includes everything you need for installation on
motorcycles equipped with OEM turn signals. Installation of this product may
be in violation of FMVSS #108.
4603
46124710
4611
4601
optional
2-Second
Flashing Brake
Function
load equalizer
Great for custom
applications where
OEM turn signals have
been removed & replaced with low draw
L.E.D. or small incandescent turn signals.
4807 4-Amp Load Equalizer (ea)
$17.99
4993 Load Equalizer for Run-Turn-Brake for Yamaha (ea)
$31.99
41
a c c e n t l i g h t i n g
w w w . k u r y a k y n . c o m
2266
2267
2264
diode kit for Metric Bikes with a Single Turn Signal Indicator Light
Required when installing L.E.D, turn signals on a motorcycle with
a single turn signal indicator light on your dash. This Diode Kit
typically keeps all turn signals from flash at once.
4709 Diode Kit (ea) $7.99
clear & red replacement turn signal lenses
2266 Clear Lenses (pr) Fits: Yamaha: All V Star 650, & 1100, all Road Star (except Warrior) & all ‘99-’10 Royal Star Models
$10.99
2267 Red Lenses (pr) Fits: Yamaha: All V Star 650, & 1100, all Road Star (except Warrior) & all ‘99-’10 Royal Star Models
$10.99
2265 Clear Replacement Lenses (pr) Fits: Kawasaki: All ‘06-’10 Vulcan 900, ‘02-’08 Vulcan 1500/1600 Mean Streak Models only Yamaha: V Star 950/T, all V Star 1300/T & all Raider Models
$10.99
2264 Clear Replacement Lenses with Reflectors Fits: Suzuki: ‘05-’09 Boulevard C/M50 (all Models), ‘05-’09 C90 (all Models), ‘06-’09 M109 (all Models), ‘08-’09 C109, ‘09 M90
$19.99
Note: All clear turn signals require colored bulbs that your bike may or may not have. Amber front & Amber or Red rear. (See pg 42 or online)
SupER LizaRdtm LiGht kitS Take your ride to a whole new level by highlighting virtually
your entire engine! Multiple kits available so you can easily
achieve the look you crave. Plug-&-play installation.
5021 Seven Color Super Lizard Maximus Kit - 8 Lights (ea)
$329.99
5022 Seven Color Super Lizard Light Starter Kit - 4 Lights (ea)
$179.99
5023 Seven Color Super Lizard Light Expansion Kit - 2 Lights (ea)
$89.99
4799 Remote Control for Lizard Lights (ea) $49.99
long lizardtm lights See where your imagination takes you by adding our 8”
flexible, low profile seven-color L.E.D. lighting strips to your
ride! Ideal for strategically mounting under tanks &
saddlebags for some brilliant ground effects!
5025 Long Lizards Expansion Kit (ea) $179.99
Note: Long Lizard Lights do not come with a controller (P/N 4715) & will flex to a maximum 10” radius.
super strobe lizardtm eyes Few things command a more
startling reaction than an intense
burst of bright light. Consider
this impact when applied to your
motorcycle! Super bright white
L.E.D. strobe lights multiply the allure
of delicious chrome when strategically placed
under your tank.
5028 Super Strobe Lizard Eyes (kit) $99.99Note: Lights are 3/4” diameter x 1/2” tall & illuminate white only.
7-Colors in one!
Note: All kits include multiple Plug & Play wire extensions. Lights install with simple peel-&-stick.
the Chameleon of L.E.d. accent Lights equipped with three Spectacular modes: Single Color Steady Illumination Single Color Flashing Illumination With Variable rate Paint Mode: All Lights in Unison Continuously Cycle Through All Seven Colors (red,
Lime, Ice Blue, Sky Blue, Dark Blue, Purple, Green) with an Adjustable Variable rate
5021
42 8 7 7 . 3 7 0 . 3 6 0 4
iso®-flame gripsOur ISO-Flame Grips have a unique flamed pattern in the
soft & cushy rubber pads. Finished off with a Maltese Cross
emblazoned end cap & trim ring for that additional bad
attitude look. This grip accepts our wildly popular ISO-Throttle
Boss, which greatly aids your hand on those long rides to the
next rally.
Fits: Motorcycle specific applications shown on chart at right
Sold in pairs
$74.99
White Technology
colored turn signal bulbsColored glass, not coated.
4814 Red - Replaces 1156 (ea) $7.99
4620 PR21W, Red (Single Circuit) Rear Turn Signal Bulb (ea) Yamaha: ‘04-’10 Road Star, Road Star Warrior, Stratoliner, Raider, Roadliner & all ‘04-’10 V Stars with clear OEM turn signal lenses Honda: ‘05 VTX 1800F & all ‘06-’08 VTX1800 Models with clear OEM turn signal lenses Universal: Single filament applications with pins at the same height & at a 170º offset
$13.99
*May have ribs on throttle sleeve that must be removed prior to installation.
Cruiser Model Years ISO-Grips ISO-Flame Grips
Transformer Grips
YamahaRoad Star (All Models) ’99-’10 6235 6261 6231
Road Star Warrior ’02-’09 6235 6261 6231V Star 1300 Including Tourer ’07-’10 6235 6261 6231V Star 1100/650 Classic ’98-’10 6235 6261 6233V Star 1100/650 Custom ’98-’10 6235 6261 6231V Star 950 (All Models) ‘09-’10 6235 6261 6231Roadliner (All Models) ’06-’10 6235 6261 6233Stratoliner Including Deluxe ’06-’10 6235 6261 6233Royal Star & Venture All 6235 6261 6231
Raider (All Models) ‘08-’10 6235 6261 6233Virago 750/535/250/ V Star 250*
All 6241 6263 N/A
VictoryAll Models (except Vision)
All 6235 6261 6233
Can-AmSpyder (All RS Models) ‘08-’10 6241 6263 N/A
Universal1” Handlebars All 6240 6262 62327/8” Handlebars All 6241 6263 N/A
universal gripsJust about any popular Cruiser can be fit with the incredibly
comfortable Küryakyn ISO, ISO-Flame & Transformer Grips. These
grips are available for both 7/8” & 1” bars. The stock throttle sleeve
is re-used. An easily cut spacer is included to accommodate bars of
differing lengths. Super hi-strength adhesive & easy step-by-step
installation instructions are included.
ISO®-Grips U.S. Patent D411,432
6240 Universal ISO-Grips for 1” Handlebars (pr) $74.99
6241 Universal ISO-Grips for 7/8” Handlebars (pr) $74.99 ISO®-Flame Grips
6262 Universal ISO-Flame Grips for 1” Handlebars (pr)
$74.99
6263 Universal ISO-Flame Grips for 7/8” Handlebars (pr)
$74.99
Transformertm Grips Patent Pending
6232 Universal Transformer Grips for 1” Handlebars (pr)
$89.99
Note: Installation of Küryakyn Universal Grips P/N 6232, 6240, 6241, 6262, 6263 requires removal of any ribs on OEM throttle sleeves.
With a rating of 5000K, the Super
Plasma GT-X is a great improvement
over stock & will show a brilliant
bluish-purple light for superior output. At a 4150K rating the Xtreme
White offers a great performance upgrade showing a crisp white light
while the Xtreme White Plus offers the same with a slight blue tint
with no sacrifice in lighting.
2215 Super Plasma GT-X H-3 (ea)
$41.99
• Wattage-55W=110W • Bulb Type-H-3 • Color Temp-5000 Kelvin • Technology-Super Plasma GT-X with XTRA Technology
2211 Super Plasma GT-X H-4 (ea)
$49.99
• Wattage-60W/55W=135W/125W • Bulb Type-H-4 Anti-Vibration • Color Temp-5000 Kelvin • Technology-Super Plasma GT-X with XTRA Technology
2214 Xtreme White H-3 (ea)
$41.99
• Wattage-35W=70W • Bulb Type-H-3 • Color Temp-4150 Kelvin • Technology-Xtreme White with XTRA Technology
2210 Xtreme White Plus H-4 (ea)
$49.99
• Wattage-60W/55W=110W/100W • Bulb Type-H-4 Anti-Vibration • Color Temp-4150 Kelvin
• Technology-Xtreme White Plus with XTRA Technology
iso®-grips
U.S. Patent D411,432
Combining great style &
comfort, these grips provide a
soft, non-slip surface that dampens
operating vibration. Recessed area between the ISO-Pads permit
air movement for added comfort in hot weather. The knurled
Accent Rings add a touch of class.
Fits: Motorcycle specific applications shown on chart below
43w w w . k u r y a k y n . c o m
g r i p s
ha
nd
leb
ars
Grips & Accessories | pg 43
Levers | pg 46
Control Covers | pg 47
Handlebar Accessories | pg 48
Mirrors | pg 51
$89.99
Cruiser Model Years ISO-Grips ISO-Flame Grips
Transformer Grips
HondaVT1300 Custom Line (Sabre/Stateline/ Interstate) ‘10 6240 6242 6232VTX1800 (All) ’02-’08 6240 6262 6232VTX1300 (All) ’03-’09 6240 6262 6232Fury ‘09-‘10 6240 6262 6232Rune ‘04-’07 6240 6262 6232Valkyrie (All Models) All 6190 N/A N/AShadow Aero 1100 ’98-’03 6236 6262 6232Shadow Sabre 1100 ’00-’07 6236 6262 6232Shadow Spirit 1100 ’97-’07 6236 6262 6232Shadow Ace Tourer 1100 ’98-’03 6236 6262 6232Shadow 750 (Ace/Aero/Phantom/RS/Spirit) ’98-’10 6240 6262 6232VLX 600 & Deluxe ’96-’07 6236 6262 6232Magna ’94-’04 6236 6262 6232Rebel 250 All 6241 6263 N/A
TriumphBonneville ‘00-’08 6236 N/A N/ABonneville America & EFI All 6236 N/A N/ABonneville T100 & EFI All 6236 N/A N/ARocket III & Touring All 6236 N/A N/ASpeedmaster & EFI All 6236 N/A N/AThruxton 900 EFI All 6236 N/A N/A
Cruiser Model Years ISO-Grips ISO-Flame Grips
Transformer Grips
KawasakiVulcan 2000 (All Models) ‘04-’10 6235 6261 6231Vulcan 1700 Voyager ‘09-’10 6235 6261 6233Vulcan 1700 (All Models) ‘09-’10 6235 6261 6233Vulcan 1600 (All Models) ‘03-’08 6235 6261 6233Vulcan 1500 (All Models) All 6235 6261 6233Mean Streak (All Models) All 6235 6261 6231Vulcan 800 (All Models) ‘95-’06 6235 6261 6233Vulcan 900 (All Models)
’06-’10 6235 6261 6231
SuzukiM109R & C109 (All Models) ‘06-’09 6235 6261 6233Intruder LC 1500/ Boulevard C90 ’98-’09 6235 6261 6233Intruder 1400/ Boulevard S83 ’95-’08 6240 6262 6232Intruder 800/ Boulevard S50 ’95-’09 6240 6262 6232Volusia 800/Boulevard C50 ’01-’09 6235 6261 6231Marauder 800/Boulevard M50
’01-’09 6235 6261 6233
Boulevard C50/M50 ‘07-‘09 6235 6261 6233Boulevard M90 ‘09 6235 6261 6233
Refer to Chart Below for Motorcycle Specific Part Numbers for all Styles of Grips
ISO-Grips - $74.99 ISO-Flame Grips - $74.99 Transformer Grips - $89.99
Sold in pairs
transformertm grips Patent Pending
It’s hard to imagine any piece of cool metal feeling better in your
hand. Bright chrome grip bodies & sculpted end caps provide a solid
feel, while contrasting soft black rubber inlays absorb vibration &
provide comfort for miles on end. Transformer Grips also allow
you to match any Küryakyn theme parts already used on your
bike with interchangeable Widow, Zombie or Maltese Cross
medallions included with each pair.
Fits: Motorcycle specific applications shown on chart below
Note: Does not accept Colored Accent Rings.
44
g r i p a c c e s s o r i e s
8 7 7 . 3 7 0 . 3 6 0 4
grip end weights for Küryakyn Grips
Quickly install our chrome end weights to the end of each
grip & add mass & length to further reduce high amplitude
handlebar vibration.
Fits: All Küryakyn ISO-, ISO-Flame, & Transformer Grips
6238 Grip End Weights (pr) $39.99
6338 Grip End Weights (ea) $21.99
stilettotm end capsSimple replacements for the existing end caps on Küryakyn ISO,
ISO-Flame, Transformer Grips, or Braided Grips. Installation is a
breeze. Screws supplied for use with or without Throttle Boss.
6249 Stiletto End Caps (pr) $39.99
universal throttle bosstm
Regardless of what type of bike you ride, the Throttle Boss will make
riding any distance more comfortable. Installs in seconds to provide a
cushioned platform for your palm. This allows you to vary or maintain a
speed without keeping a tight grip on the throttle.
iso®-throttle bosstm
Added to our popular
ISO-Grips, this little jewel
can make all the difference in
the world on a long ride. Allows
the driver to slightly relax their
grip on the gas & still maintain a
constant speed.
Fits: Both ISO-Grips & ISO-Flame Grips (Can also be
installed on the left grip for a matched set)
6250 ISO-Throttle Boss (ea) $17.99
6253 ISO-Throttle Boss (pr) $31.99
6242 Extended ISO-Throttle Boss (1/4” Longer Than Standard ISO-Throttle Boss) (ea)
$20.99
Dramatically reduce the wrist fatigue often
caused by long rides. The CrampBuster will rotate
forward all day long. Yet when downward pressure
is applied by your hand, the throttle is regulated
effortlessly & accurately - without squeezing.
Narrow
6258 Fits: 1” bars using 1-1/2” o.d. grips (ea) $10.99
6259 Fits: 7/8” bars using 1-1/8” o.d. grips (ea) $10.99
Wide
6254 Fits: 1” bars using 1-1/2” o.d. grips (ea) $10.99
6257 Fits: 7/8” bars using 1-1/8” o.d. grips (ea) $10.99Note: Use 6258 & 6254 on grips with 1-7/16” to 1-3/4” outside diameter & suggested for use with all Küryakyn grips. Use 6259 & 6257 on grips with 1-1/8” to 1-3/8” outside diameter.
throttle boss for transformer grips
Patent Pending
6294 Transformer Throttle Boss (ea) Fits: Left or right ISO-Grip, ISO-Flame or Transformer Grip
$16.99
cruise assistU.S. Patent 4,875,386
Fits: Any application with twist
grip throttle
6251 Universal Throttle Boss (ea)
$11.99
kewlocktm grip end helmet lockThis trick little device adds both
a locking helmet holder to the
end of your grips & functions as
a bar end weight to assist
in stabilizing.
Fits: All Küryakyn ISO-, ISO-Flame,
& Transformer Grips
6247 KewLock (ea) $39.99
6248 KewLocks (pr) $79.99
6238
Narrow
6294
Wide
contoured iso®-throttle bossFits: All Küryakyn ISO-, ISO-Flame, Transformer Grips
6299 Contoured ISO-Throttle Boss - Right Side (ea)
$19.99
6309 Contoured ISO-Throttle Boss - Left Side (ea)
$19.99
throttle rockerThe Throttle Rocker attaches to the grip
with a Velcro strap & allows you to maintain
a steady cruising speed without keeping a
tight grip on the throttle.
Fits: Any application with twist grip throttle
6255 Right (ea) $10.99
6256 Left (ea) $10.99
45w w w . k u r y a k y n . c o m
premier affordable throttle assistA pleasant cruise shouldn’t become a white-knuckle ride! Our innovative throttle assist allows you to
relax your grip on the throttle, making pins & needles & fatigue a distant memory. This simple design
emphasizes reliable function over flashy complex styling. A variety of interchangeable rubber inserts
Fits: All Küryakyn Grips
Universal: All 7/8” & 1” Bars for OEM grips & aftermarket grips with minimum 1-1/8” to maximum
1-3/4” outside grip diameter
6218 Premier Affordable Throttle Assist (ea) $29.99
6285
Cruiser Model Years Throttle Assist
Clutch Bar End Weight
VictoryKingpin (With Küryakyn ISO-Grips)
’04-’10 6285 6288
Hammer (With Küryakyn ISO-Grips)
’06-’10 6285 6288
Vegas, All Models (With Küryakyn ISO-Grips)
’04-’10 6285 6288
YamahaV Star 650 Custom & Classic
’98-’10 6285 6288
V Star 1100 Custom & Classic
’98-’09 6284 6287
V Star 950 ‘09-’10 6284 6287V Star 1300 Including Tourer
’07-’10 6284 6287
Royal Star ’96-’00 6285 6288Royal Star Venture ’99-’10 6284 6287Road Star 1700 (All Models)
’04-’10 6284 6287
Roadliner/Stratoliner ’06-’10 6284 6287Raider ’08-’10 6284 6287
Cruiser Model Years Throttle Assist
Clutch Bar End Weight
HondaVT1300 Custom Line (Sabre/Stateline/ Interstate)*
‘10 6285 6288
VLX600 Shadow ’96-’07 6285 6288Shadow 750 (Ace/Aero/Phantom/RS/Spirit)*
’98-’10 6285 6288
Shadow 1100 Ace/Aero/Sabre/Spirit ’97-’07 6285 6288750 Magna ’94-’03 6285 6288VTX1300 (All Models) ’03-’09 6285 6288VTX1800 (All Models) ’02-’08 6285 6288Valkyrie ’97-’04 6285 6288ST100/ST-1300 ’95-’09 6285 6288 KawasakiVulcan 800 Drifter ’00-’06 6285 N/AVulcan 800 ’97-’05 6285 N/AVulcan 900 (All Models) ’06-’10 6285 6288Vulcan 1500 Classic/Drifter/Nomad/Mean Streak Classic
’96-’08 6285 N/A
Vulcan 1600 Classic & Mean Streak ’03-’08 6285 6288Vulcan 1600 Nomad ’05-’08 6285 N/A SuzukiBoulevard C/M/S50, Marauder ’97-’09 6285 6288Intruder 1400/S83 ’04-’08 6285 6288Intruder 1500/C90 ’98-’09 6285 6288UniversalFor All Models with 7/8” or 1” Hollow Bars with Open Ends (ID>-5/8”)
N/A 6285 6288
Put an End to
Those “Pins &
Needles”!
6284
*Bar weight required to be removed on some late Shadow 750 Models & VT1300 Custom Line.
mechanical throttle cruise assistEnjoy those longer rides & relax your throttle hand
with the Mechanical Throttle Assist. This is the simplest
& cleanest looking throttle position holder available.
Attaching to the end of your handlebars, this beauty
looks like a bar end weight. Simply hold the throttle
at desired location & roll your little finger back to hold
your throttle in position. The spring loaded tensioner
makes it easy to set without over tightening for easy
throttle shut down when needed. Add the left side for a
bar end weight matched pair & ride on in comfort.
Fits: OEM Grips & all ISO-, ISO-Flame, & Transformer
Grips with 7/8’ or 1” handlebars (See motorcycle specific
chart right)
6284 Mechanical Throttle Cruise Assist (ea)
$89.99
6285 Mechanical Throttle Cruise Assist (ea)
$89.99
6287 Clutch Side Matching Bar End Weight (ea)
$39.99
6288 Clutch Side Matching Bar End Weight (ea)
$39.99
Note: Proper installation may require cutting or drilling a 5/8” hole in the end of the OEM grips. Proper installation requires 7/8" or 1” handlebars that have open ends. Not compatible with Küryakyn Chrome style throttle bosses that screw to the end of Küryakyn Grips or other grip end accessories/weights.
46 8 7 7 . 3 7 0 . 3 6 0 4
l e v e r s
brake & clutch master cylinder covers for Yamaha Patent Pending
Staring at you every time you ride, your handlebar controls are worth
wrapping in stunning, beautiful chrome. Encasing your mount clamp &
blending seamlessly into your handlebars, you’ll fall in love every time you
ride. Mounting right under the mirror stems, you won’t have to mess with
your reservoir covers for installation.
Fits: All ’06-’10 Yamaha Roadliner, Stratoliner, & Raider Models
1745 Brake & Clutch Master Cylinder Covers (pr) $79.99
master cylinder covers for Vulcan 1500
Add some sizzle to your hand controls. Easily installed
with only two fasteners. You’ll be stylin’ in no time!
7811 Fits: ’98-’08 Vulcan 1500 (pr) $59.99
clutch perch coverA great addition to the
rest of our products
to cover your hand
controls. Detail is often the
difference between good & great. Our
Perch Covers fit in that category! Installation is
quick & easy.
9108 Clutch Perch Cover (ea) Fits: Yamaha: All ’99-’10 Road Star, ‘02-’09 Road Star Warrior, ‘07-’10 V Star 1300, ‘99-‘09 V Star 1100, ‘09-’10 V Star 950, & ‘98-’10 V Star 650 Kawasaki: All Vulcan 900/2000 Models
$51.99
9194 Clutch Perch Cover (ea) Fits: Honda: ‘10 VT1300 Custom Line (Sabre/Stateline/Interstate), ‘09-’10 Fury Models, All ’03-’09 VTX1300, ‘99-’10 Shadow 750 Ace/Aero/Phantom/RS/Spirit, & ‘99-’07 Shadow 1100 Sabre/Spirit
$51.99
Honda
7411* & 7421
Models with Cable Operated Clutches’88-’07 Shadow VT600’98-’10 Shadow VT750 (All Models)’94-’04 Magna 750’91-’06 Nighthawk CB750’95-’07 Shadow VT1100/C2/C2-2/T’97-’07 Shadow VT1100C’03-’09 VTX1300 (All Models)’04-’10 Shadow VT750 Aero/Spirit/Phantom/RS‘09-’10 Fury (All Models)‘10 VT1300 Custom Line (Sabre/Stateline/Interstate)
7412* & 7429
Models with Hydraulic Clutches’85-’96 Shadow VT1100C’97-’04 Valkyrie (All Models except Rune)’02-’08 VTX1800 (All Models)
Kawasaki
7425 ’90-’08 Vulcan 500All ZL600 Eliminator’95-’06 Vulcan 800 (All Models)’04-’10 Vulcan 2000 (All Models)‘06-’10 Vulcan 900 (All Models)
7427 ’87-’08 Vulcan 1500 (Including Mean Streak)’03-’08 Vulcan 1600 (Including Mean Streak)
Suzuki
7425 ’97-’06 Marauder 800/Boulevard M50’01-’06 Volusia 800/Boulevard C50
7427 ’98-’06 Intruder 1500LC/Boulevard C90’04-’06 Marauder 1600/Boulevard M95
Yamaha
7415 ’06-’10 Roadliner (All Models)’06-’10 Stratoliner (All Models)’08-’10 Raider (All Models)
7417 ’98-’10 V Star 650 Custom’99-’09 V Star 1100 Custom
7418 ’99-’10 Road Star 1600/1700 (All Models)’02-’09 Road Star Warrior
7419 ’98-’10 V Star 650 Classic’99-’09 V Star 1100 Classic‘07-’09 V Star 1300/T‘09-’10 V Star 950/T
* Price is $79.99
wide style levers for Metric Cruisers
These chrome levers are wider & more comfortable than
stock. Let’s just say - replace your stock levers today!
$39.99All Lever Pairs
Except P/N 7415 - $45.99
zombietm levers for Honda U.S. Patent D596,091
Sinister Zombie or conservative Grooves? This is the only decision
you will have to make when installing these direct replacement
wide levers. With contoured finger pockets & a small center rib,
you will have a positive pull when clutching & braking with reduced
finger pressure. Match these to other Zombie or Grooved products
& achieve that truly finished look.
7411 Fits: See Chart Right (pr) $79.99
7412 Fits: See Chart Right (pr) $79.99
47w w w . k u r y a k y n . c o m
c o n t r o l C o v e r s
master cylinder cover for Honda
The 1-1/4” fat bars on your Fury deserve better treatment than
a tacky grey brake master cylinder. Transform this handlebar
eyesore into cool chrome with our full Master Cylinder Cover
contoured specifically for your Fury.
Fits: ‘10 VT1300 Custom Line
(Sabre/Stateline/Interstate), all
‘09-’10 Fury Models
1746 Master Cylinder Cover (ea)
$45.99
Note: Does not install with accessories that mount to the brake perch bolts.
deluxe master cylinder cover set for VTX1800
Designed specifically for the VTX1800, this set includes covers
for both the handlebar brake & clutch master cylinders. These
covers fit over the stock lids making installation quick, easy,
& neat.
Fits: All ’02-’08 VTX1800 Models
9188 Deluxe Master Cylinder Cover Set (pr) $72.99Note: Deluxe Master Cylinder Cover Set does not install with accessories that mount to clutch or brake perch bolts.
master cylinder coversAs cool as the new Cruisers are, the handlebar controls leave a lot to be desired in the
looks department. Our handlebar brake Master Cylinder Cover cures the problem in
short order. Installation is quick & neat right over the stock lid. It’s easy & it’s cool!
9105 Brake Master Cylinder Covers (ea) Fits: All ’98-’07 V Star 650 & ‘99-’07 V Star 1100 & early ‘08 V Star 650/1100 with brake master cylinders extending 1/4” above mount clamp
$41.99
9106 Brake Master Cylinder Covers (ea) Fits: All ’99-’10 Road Star & ‘02-’09 Road Star Warrior
$41.99
9187 Brake Master Cylinder Covers (ea) Fits: All ‘03-’09 VTX1300, all ‘02-’08 VTX1800 (right side only), ‘99-’07 Shadow 1100, ‘99-’10 Shadow 750 Ace/Aero/Deluxe/Phantom/RS/Spirit, ‘99-’07 VLX600 Deluxe, ‘00-’07 VLX600, & ‘00-’03 Valkyrie
$39.99
7813 Brake Master Cylinder Cover (ea) Fits: All ’04-’10 Vulcan 2000, all ‘06-’10 Vulcan 900, ’03-’08 Vulcan 1600 Models & Mean Streak
$39.99
1743 Clutch Master Cylinder Cover (ea) Fits: All ’03-’08 Vulcan 1600 Models & Mean Streak
$39.99
1744 Brake Master Cylinder Cover (ea) Fits: All ’07-’09 V Star 1300, ‘09-’10 V Star 950, all ‘09 V Star 1100, ‘09-’10 V Star 650, & ’08 V Star 1100 & 650 with brake master cylinders extending 1/2” or more above the mount clamp
$49.99
Note: Master Cylinder Covers (P/N 9106, 9187, 7813, 1746 & 1743) do not install with accessories that mount to clutch or brake perch bolts.
handlebar control coversU.S. Patent D556,645 & D575,203 may apply
Cover up unsightly housings & create a smooth, full-custom look with these clamshell-design chrome covers. They install easily &
encapsulate the stock housings without interfering with control functions. They’re an awesome accent to ISO-Grips & our custom
mirrors. Offered for many applications.
Sold as Sets:
9124 Fits: All ’02-’08 VTX1800 $69.99
9184 Fits: ‘10 VT1300 Custom Line (Sabre/Stateline/Interstate),‘09-’10 Fury, all ’02-’09 VTX1300, all VLX600, ‘99-’10 Shadow 750 Ace/Aero/Phantom/RS/Spirit & other Late Model Hondas without choke on left handlebar control
$72.99
9189 Fits: Shadow 1100, ’97-’04 Valkyrie (except Rune & Interstate) & other Late Model Hondas with choke on left handlebar control
$72.99
9112 Fits: Yamaha: ’99-’07 Road Star, all Road Star Warrior, V Star 650 Custom Kawasaki: Vulcan 2000, Mean Streak, all Vulcan 900 Suzuki: Marauder 1600/Boulevard M95
$69.99
9113 Fits: Yamaha: V Star 1100 Custom $59.99
9114 Fits: Yamaha: V Star 1100 Classic/Silverado $69.99
9117 Fits: Yamaha: V Star 650 Classic/Silverado Kawasaki:‘99-’08 Vulcan 1500, all Vulcan 1600
$69.99
1744
9124
9112
9187
9124
9106
48 8 7 7 . 3 7 0 . 3 6 0 4
h a n d l e b a r a c c e s s o r i e s
1486
1487
snap-n-gotm drink holderEven if you’re wearing a full set of leathers, you still shouldn’t ride with a cup of
hot coffee between your legs. These affordable drink holders mount on either
the clutch or brake perch mounts or a 1” bar. With secure snap-on mounting,
simply Snap-N-Go to install or remove. When removed it leaves an unobtrusive
stud on your perch or a small clamp & stud for universal bar application. Select the
drink holder style you desire & ride with the plush comforts you deserve.
Fits: Universal for 1” bar or clutch or brake perch mount applications (See
Typical Applications below for clutch/brake perch fitments - Mounts
with single M 6x1 or 1/4-20 custom fastener)
1486 Snap-N-Go with Stainless Steel Mug (ea) $39.99
1487 Snap-N-Go with Universal Basket (ea) $39.99
Note: P/N 1487 accepts beverage containers from 2-3/8” to 3-1/2” in diameter.
the sound of chrometm
No compromises here with our Gen 2 perfectly designed, 3” main
speakers with additional tweeters for a full bodied sound. The
weatherproof bullet housing has a powerful built-in true 50 watt
amplifier & includes a volume & on/off control switch. Convenient
swivel adjustment gives you the freedom to position speakers in any
direction you choose. With a full plug & play wiring harness, noise purifier
& standard 3.5 mm jack, simply connect your iPod, MP3 player, satellite
radio, personal CD player, etc. & ride on.
851 Fits: 1-1/4” Handlebars (set) $399.99
852 Fits: 1” Handlebars (set) $399.99
Note: Not suggested for use with FM/AM radios.
electrical power point Perfect for plugging in your cell phone, iPod, GPS, air pump, or any
other electrical device taken on the road. This power point/cigarette
lighter will keep them charged. Built into our Silver Bullet light housing
& comes with everything you need to connect directly to your battery
with a quick disconnect.
1423 Fits: 1” Handlebars (ea) $69.99
1476 Fits: 1-1/4” Handlebars (ea) $69.99
1483 Fits: Universal for Clutch or Brake Perch Mounting (Bolts vertical spacing center to center at 1-1/16” to 1-9/16” apart to accept included m6x1 or 1/4-20 bolts) See Typical Applications (Right)
$69.99
Note: Clutch & Brake Perch Mounts do not install on Yamaha or Kawasaki cable clutch perch or with Küryakyn Master Cylinder Covers (P/N 9188, 9106, 9187, 7813,1743 & 1746).
both Bar
& Perch
Mounting
capabilities!
Honda: All GL1800/GL1500 Models, ‘09-’10 Fury, ‘10 VT1300
Custom Line (Sabre/Stateline/Interstate)
Note: VT1300 Custom Line & Fury have minimal tank clearance for accessories mounted to perch mount.
All VTX1300/1800 Models,
Shadow 750 Ace/Aero/Phantom/RS/Spirit, Shadow 1100
Kawasaki: All Vulcan 900 Models, Vulcan 1500/1600 Models
(Including Mean Streak), all Vulcan 2000 Models
Suzuki: Boulevard M/C50, C90, M109
Yamaha: (Brake) All Road Star & Warrior Models, all V Star
Models, all Venture Models
Note: Clutch & Brake Perch Mounts do not install on Yamaha or Kawasaki cable clutch perch or with Küryakyn Master Cylinder Covers (P/N 9188, 9106, 9187, 7813, 1743 & 1746).
Typical Applications for Clutch or Brake Perch Mounting:
power right
at your
fingertips!
1423
1483
49w w w . k u r y a k y n . c o m
beverage carrier
Patent Pending
Upgrade your Küryakyn
Universal Drink Ring to
accept most cups, cans or
bottles. Easy on, easy off snap
design that is also collapsible for storage. Made from PVC
leather & works with any Küryakyn “ring” style drink holder.
1459 Beverage Carrier Only (ea) $9.99
beverage carrier plus mount Need the whole package...something to hold
your drink & the mount? Choose from the options
below & you'll be set.
1460 Snap-N-Go Drink Ring with Beverage Carrier (ea) Fits: Universal Perch Mount or 1" Bar Applications
$29.99
1488 Universal Drink Ring for 1” Bar with Beverage Carrier (ea)
$49.99
1489 Universal Drink Ring for 1-1/4” Bar with Beverage Carrier (ea)
$49.99
1500 Universal Drink Ring for Perch Mount with Beverage Carrier (ea) Fits: Clutch or Brake Perch Mounts (See Typical Applications (Left - pg48)
$49.99universal drink holdersBring your beverage with you on those hot or cold days! Mount your drink holder either on your
handlebars or your clutch or brake perch mounts. The quick detach thumb screw mount leaves a
simple clamp when not in use. Choose either the Universal Basket Holder or Stainless Mug with
Mounting Ring to hold your beverage.
with Basket
1422 Fits: 1” Bars (ea) $59.99
1475 Fits: 1-1/4” Bars (ea) $59.99
1462 Fits: Clutch or Brake Perch Mounts (ea)
$59.99
1429 Replacement Basket for Drink Holder (ea)
$20.99
Note: Universal Basket Holder accepts most average sized cups, cans, bottles & mugs with a 2” to 3 1/2”diameter.
1463
1422
1488
1459
1488
l.e.d. battery gauge Our L.E.D. Battery Gauge is an array of L.E.D.’s
indicating the operating voltage of the bike's
electrical system. Green L.E.D.’s represent
the normal operating range, Amber L.E.D.'s
warn that the bike is not charging, flashing red
L.E.D.s will alert the rider of an impending stall
or over-charging. Simple two-wire connection
& a compact size (about 2” x 3/4” x 3/16”). A
daylight sensor automatically adjusts the
brightness of the L.E.D.'s.
4219 L.E.D. Battery Gauge, Chrome (ea)
$39.99
4218 L.E.D. Battery Gauge, Black (ea)
$39.99
with Stainless Steel Mug
1464 Fits: 1” Bars (ea) $59.99
1477 Fits: 1-1/4” Bars (ea) $59.99
1463 Fits: Clutch or Brake Perch Mounts (ea)
$59.99
1469 Replacement Stainless Steel Küryakyn Travel Mug (ea)
$17.99
Clutch or Brake Perch Mount Kit
1472 Fits: Universal for Clutch or Brake Perch Mounting (Bolts vertical spacing center to center at 1-1/16” to 1-1/2” apart to accept included m6x1 or 1/4-20 bolts) Note: Requires existing Küryakyn Drink Holder or Accessory Mount.
$26.99
For use
with new or
existing drink
ring
see typical
clutch or brake
perch mounts
pg 48
8 7 7 . 3 7 0 . 3 6 0 450
5/16”
13/16”
1/2” 1420
1473
universal gadget pouchProtect your portable GPS with the simplest & most versatile weather
resistant pouch available. Our new Gadget Pouch has the ability to
accommodate almost any size GPS, cell phone, or iPod & can be
mounted to the handlebars in seconds without any tools.
Touch screen compatible & works with or without Küryakyn
accessory mount. Kit includes foam insert to accommodate
smaller GPS units.
Fits: Universal for Bar mounting (3/4” to 1-3/4” Diameter)
& Küryakyn accessory mounts
4195 Universal Gadget Pouch (ea) (4-1/4” Tall, 6-1/4” Wide, 3/4” Deep)
$29.99
universal accessory mount clamps
These two-piece clamps provide a simple, secure & clean
method for mounting most of your modern-day conveniences.
1420 Fits: 1” Bars (ea) $11.99
1468 Fits: 1-1/4” Bars (ea) $18.99
1415 Fits: 3/4”, 5/8”, & 1/2” Bars (ea) $16.99
universal handlebar accessory mountsAttach your cell phone, MP3 player & almost any portable device directly to your handlebars using
this mount. The quick detach mounting plate leaves a simple clamp when it is not in use.
• Standard 4-hole AMPS pattern
• Includes hook-&-loop straps
• Accepts most belt clips
1421 Fits: 1” Handlebars (ea) $49.99
1474 Fits: 1-1/4” Handlebars (ea) $49.99
1461 Fits: Universal for Clutch or Brake Perch Mounting (Bolts vertical spacing center to center at 1-1/16” to 1-1/2” apart to accept included m6x1 or 1/4-20 bolts) Honda: All GL1500/1800 Models, ‘09-’10 Fury, ‘10 VT1300 Custom Line (Sabre/Stateline/Interstate), all VTX1300/1800 Models, Shadow 750 Ace/Aero/Phantom/RS/Spirit, Shadow 1100 Kawasaki: All Vulcan 900 Models, Vulcan 1500/1600 Including Mean Streak, all Vulcan 2000 Suzuki: Boulevard M/C50, C90, M109 Yamaha: (Brake) All Road Star & Warrior Models, all V Star Models, all Venture Models (ea)
$59.99
Note: Clutch & Brake Perch Mounts do not install on Yamaha & Kawasaki cable clutch perch or with Küryakyn Master Cylinder Covers (P/N 9188, 9106, 9187, 7813, 1743 & 1746).
universal gadget pouchesEverybody has things they need to carry; keys, cell phones & iPods.
Empty your pockets & make transporting these items easy with our
Accessory Pouches. Designed specifically with a quick detach strap
for your motorcycle handlebars, your items will be easily accessible
at the tip of your fingers. Simply strap & go or remove it in seconds
& leave your bars clean.
Fits: Universal for 3/4” to 1-3/4” Bars & Küryakyn Accessory Mounts
1478 Small Pouch (ea) (3-1/2” Tall, 2-1/4” Wide, 3/4” Deep)
$29.99
1479 Large Pouch (ea) (4-1/2” Tall, 3-1/4” Wide, 3/4” Deep) Note: Holds standard 3-1/2" x 3" E-Z pass.
$29.99
quick
detach
strap
1479
1478
mounts in
seconds!
Now Fits
Luggage Racks
& Saddlebag
Rails!
P/N 1479 Holds Standard 3-1/2” x 3”
E-Z Pass
6-1/4"
4-1/4"
coordinates
with our Universal
gadget Pouches!
51w w w . k u r y a k y n . c o m
m i r r o r s
w w w . k u r y a k y n . c o m
5"2-5/8"
1449
1448
scythetm mirrorsDare to slice through the wind with the finest
example of cutting edge mirrors. The Scythe &
Scythe II Mirrors feature a Rambo Knife shaped
mirror head that provides a sleek streamlined
profile with smooth operating swivels for easy
adjustment. Mirror Adapters (P/N 1445 or 1446)
required for installation on Metric Cruisers.
1449 Scythe Mirrors (pr) $139.99
1448 Scythe II Mirrors (pr) $139.99
Note: Not recommended for Buckhorn handlebars.
turn signal mirrors All bikers agree - other motorists need
to know when you’re turning. Whether
you’re changing lanes or turning onto a
cross street, these super-bright L.E.D. Turn
Signal Mirrors show everyone your intentions.
They work as running lights, too, So even when
you’re just going straight the world knows you’re
there. The necessary load equalizer is included.
Mirror Adapters (P/N 1445 or 1446) required for
installation on Metric Cruisers.
1431 Turn Signal Mirrors with Flat Glass (pr)
$189.99
1432 Turn Signal Mirrors with Convex Glass (pr)
$189.99
Note: The draw produced by these lights, or load equalizers used with L.E.D. lights, may or may not be what is needed for proper flash & frequency on your Metric Cruiser. If you are experiencing improper flash, we recommend one of our Load Equalizers (P/N 4993 or 4807).
5"2-5/8"
zombietm mirrorsWe’ve taken your run-of-the-mill skull & added 35% more angst
& 20% more anguish to make these the nastiest mirrors on the
street. Overall, the mirror head is about 3” x 4” with round glass
3” in diameter. The smoothly arched stem positions the center
of the mirror head about 4-3/8” above & 5-1/2” outboard of the
mounting point on the handlebar control. Mirror Adapters (P/N
1445 or 1446) required for installation on Metric Cruisers.
1450 Zombie Mirrors (pr) $149.99
1451 Replacement Knurled Treetops (ea) $9.99Note: Not recommended for buckhorn handlebars.
ellipsetm mirrors These state of the art custom mirrors are cut from the same mold as our Turn Signal Mirrors, but
they do not have the running light & turn signal functions. Available with flat or convex glass &
feature an oversized swivel ball for superior locking ability. Mirror Adapters (P/N 1445 or 1446)
required for installation on Metric Cruisers.
1437 Ellipse Mirrors with Flat Glass (pr) $103.99
1438 Ellipse Mirrors with Convex Glass (pr) $103.99
Cutting
Edge Mirror
Technology!
52 8 7 7 . 3 7 0 . 3 6 0 4 kury
akyn
cus
tom
peg
sku
ryak
yn c
usto
m p
egs
trident mirrorsNo other mirrors can compare to these sleek ovals. Featuring a
beefy yet light 3 bar mirror stem with double adjustment points
& a swivel head, these mirrors lock in just where you want. The
convex lens offers increased viewing with approximately 9 inches
from mount to mirror end. Mirror Adapters (P/N 1445 or 1446)
required for installation on Metric Cruisers.
Mirror Head Dim: 4-3/4” Wide x 2-1/8” Tall (Convex Lens)
1495 Trident Mirrors (ea) $64.99
sleek
styling
5-1/2"3"
Large
5-1/2"3"
5"2-5/8"
Small
Large
magnumtm mirrorsWe call them Magnum because of their rugged &
beefed up looks. Featuring sturdy stems & an oversized
adjuster ball. Available in two head sizes. Mirror
Adapters (P/N 1445 or 1446) required for installation on
Metric Cruisers.
1428 Small Head - Standard Stem (pr) $95.99
1430 Large Head - Standard Stem (pr) $95.99
mirror adapters for Metric Cruisers
1445 Mirror Adapters for Honda, Suzuki, Kawasaki & Victory (pr) $10.99
1446 Mirror Adapters for Yamaha (pr) $10.99Note: Required to mount Küryakyn Mirrors on Metric Cruisers.
4-3/4”
7/8”
2-1/2”
pilottm P/N 4419 pg Online
4-15/16”
3-1/16”
widow® P/N 4492 pg 54
1-13/16”
flamin’ P/N 4417 pg 55
5-5/8”
1-3/4”
2-13/16”
mini dagger peg P/N 7520 pg 55
4-1/4”
1-1/4”
1-1/8”
5-1/2”
1-13/16”
4-13/16”
swingwing P/N 4467 pg 56 & 66
7”
9-7/8”
5-1/2”
kaisertm P/N 4461 pg Online
1-5/8”
2-1/4”
magnumtm plus mirrorsMagnum Plus Mirrors position the mirror head out-ward
2” farther than our Magnum Mirrors. Available with
flat glass or convex glass. Mirror Adapters (P/N 1445 or
1446) required for installation on Metric Cruisers.
1409 Large Head - Long Stem, Convex Glass (ea)
$51.99
1412 Large Head - Long Stem, Flat Glass (ea)
$51.99
53w w w . k u r y a k y n . c o m
fo
otr
es
ts
Footpegs & Adapters | pg 54
Floorboards | pg 57
Splined Adapters | pg 58
Floorboard Covers | pg 59
Brake Pedal Pads | pg 60
Cruise Pegs | pg 62
Engine Guards | pg 65
Passenger Comfort | pg 66
Male Mount Pegs | pg 67
4-1/2”
1-1/4”
dually iso® P/N 7963 pg 55
2-1/2”
4-5/8”
1-1/4”
4-7/8”
1-1/2”
large iso® P/N 7965 pg 55small iso® P/N 7964 pg 55
kury
akyn
cus
tom
peg
sku
ryak
yn c
usto
m p
egs
4-1/2”
7/8”
mini pilottm P/N 4444 pg Online
5”
1-1/8”
iso®-wing P/N 4452 pg 55
5”
5-1/4”
sweptwing P/N 4464 pg Online
1-3/4”
4-3/8”
5-1/2”
1”
1-1/4”
1”
stiletto P/N 4476 pg 54
5”
1-13/16”
3”
zombietm P/N 4471 pg 55
5-1/4”
1-1/2”
retrotm P/N 4401 pg Online
1-3/4”
4-1/2”
1-1/4”
6-1/4”
switchblade P/N 4446 pg 56
2-1/2”
5-7/8”
1-3/4”
7-1/2”
flamin’ switchblade P/N 4412 pg 55
see New
Trident
Pegs
pg 55
54 8 7 7 . 3 7 0 . 3 6 0 4
p e g a d a p t e r s
Cruiser Model Year Front Rear
HondaGL1800 ’01-’10 7939 NoneVTX1800C/F ’02-’08 8803 8802VTX1800R/S/N/T ’02-’08 None 8802GL1500 ’88-’00 7946 NoneValkyrie (all) ’97-’04 7946 8802VTX1300R/S/T ’03-’09 None 8802VTX1300C ’03-’09 8803 8802VT1300 Sabre/Stateline '10 8803 8802VT1300 Interstate '10 None 8802Fury '09-'10 8803 88021100 Sabre ’00-’07 8803 88031100 Aero ’99-’02 None 88021100 Ace Tourer ’97-’03 7946 88021100 Spirit ’99-’07 8803 88031100 Shadow Ace ‘95-’99 7946 8802750 Shadow/Ace/Aero/Spirit/Phantom/RS
’00-’10 8803 8802
750 Magna ’96-’04 8803 8802600 VLX & Deluxe ’96-’07 8803 8802Rebel 250 '96-'10 None 8802
KawasakiVulcan 2000 (All Models) ‘04-'10 None 8831Vulcan 1700 Classic/LT '09-'10 None 8831Vulcan 1600 Classic ‘03-’08 None 8831Vulcan 1500 Classic ‘96-’08 None 8831Vulcan 1500 A/B ‘87-’99 8830 8831Vulcan 1500 Drifter ‘99-’05 None 8831Vulcan 1500/1600 Mean Streak
‘02-’08 8830 8831
Vulcan 900 Classic ‘06-’10 None 8831Vulcan 900 Custom ‘06-’10 8830 8831Vulcan 800 Classic ‘96-’05 8830 8831Vulcan 800 Custom ‘95-’05 8830 8831
Cruiser Model Year Front Rear
SuzukiMarauder 1600/ Boulevard M95
‘04-’06 8830 8831
Intruder 1500 LC/ Boulevard C90
‘98-’09 None 8821
Intruder 1400/ Boulevard S83
‘95-’08 8820 8821
Marauder 800 ‘97-’04 8820 8821Boulevard C50 ‘05’-09 None 8823Boulevard M50 ‘05-’09 7939 8823Volusia 800 ‘01-’04 7939 8802M109R (All Models) ‘06-‘09 7939 8822Boulevard M90 '09 7939 8823Boulevard C109 '08-'09 None 8823
YamahaV Star 1300/T ‘07-’10 None 8809V Star 1100 ‘99-‘09 8810 8811V Star 950/T '09-'10 None 8811V Star 650 ‘98-‘10 8810 8811V Star/Virago 250 All 8831 8811V-Max '09-'10 8802 8843V-Max '85-'08 8810 8811Virago 1100 All 8810 8811Virago 750 All 8810 8811Road Star 1600/1700 (except Warrior)
‘99-’10 None 8811
Road Star Warrior ‘02-’09 8812 8809Royal Star with OEM Rear Pegs ‘96-’01 None 8811
Roadliner/Stratoliner ‘06-‘10 None 8809Raider ‘08-'10 8802 8809
Cruiser Model Year Front Rear
TriumphThunderbird ‘95-’03 8840 8840
Thunderbird Sport ‘98-’00, ‘03 8840 8840
Adventurer ‘96-’01 8840 8840Legend ‘99-’01 8840 8840Bonneville T100, & Bonneville SE ‘01-’10 None 8840
Bonneville America ‘02-’10 8840 8840Speedmaster ‘03-’10 8840 8840Rocket III All 8840 8802
VictoryHammer All 8805 8805Vegas, 8-Ball, Jackpot All 8805 8805Kingpin* All None 8805*
Cross Roads '10 None 8805
Can-AmSpyder (All RS Models)** '08-'10 7939 8848
Note: Motorcycle specific adapters only work with stock OEM peg mounts.
*Victory Kingpin-Only if using Accessory Peg Mounts from Victory.
** Can-Am Spyder-Will not work with hard saddlebags that have replacement passenger peg mounts.
footpegs & adapters fit
together as shown
Serrated
Ends Lock Into Pegs
for Extra Hold!
Küryakyn Footpegs are a 2-part system for convenience & easy installation. Simply select the Footpegs you desire & the appropriate motorcycle
specific Adapter for your bike. The serrated Adapters bite right into your footpegs for a secure attachment,
so make sure they are at the desired angle before you tighten them down. This convenient 2-part
system also allows you to change your pegs without purchasing new adapters. Have a new bike? Simply
switch your pegs by purchasing new Adapters.
Note: Adapter fitments are for stock OEM peg mounts.
to pinpoint the part number for the correct adapter for your motorcycle’s front or rear location!
locate your bike model below...
stiletto pegsThe radical Stiletto Peg is designed for
those who ride on the wild side. Motorcycle
specific adapter required - see chart at left.
4476 Stiletto Pegs without Adapter (pr)
$93.99
widow® pegsInject some poison! A prowling Widow &
forbidding barb add a menacing effect to
your ride while providing a comfortable
perch for your feet. Motorcycle specific
adapter required - See chart at left.
4492 Widow Pegs without Adapter (pr)
$93.99
4493 Widow Pegs Replacement Rubber Pads (set)
$13.99
$21.99Sold in Pairs
Peg Adapters
55w w w . k u r y a k y n . c o m
7963
7964
4452
7965
flamin’ pegs U.S. Patent D593,911
Flames add class & timeless design to your bike. Coordinate these pegs
with our ISO-Flame Grips for a torchin’ hot look! Motorcycle specific
adapter required - pg 54.
4417 Flamin’ Pegs without Adapter (pr) $93.99
zombietm pegsThese skeletal pegs are
sturdy & rugged. An
ominous skull is nestled
between the rubber pads
with a sinister spire point
filling the void. Motorcycle
specific adapter required - pg 54.
4471 Zombie Pegs without Adapter (pr)
$93.99
4472 Zombie Pegs Replacement Rubber Pads (set)
$11.99
4474 Replacement Curb Feelers (set/4)
$16.99
4473 Replacement Skull Emblem (ea)
$14.99
mini dagger pegsKeeping cruise, driver, or passenger pegs minimal. The
inner scallop provides excellent support for highway pegs.
Motorcycle specific adapter required - pg 54.
Dim: 1-1/8” wide by 3-1/2” long
7520 Mini Dagger Pegs without Adapter (pr) $69.99
7512 Mini Dagger Peg Replacement Rubber Pads (set) $16.99
1492 Replacement Zombie Emblems (pr) $14.99
trident iso®-pegsPatent Pending
All the features & of the original ISO-Peg but with a whole new
look! Coordinates well with stock or custom footrests. Already
have ISO-Pegs? Then update them with a whole new style by
adding the Trident Replacement Rubbers.
Trident Pegs without AdapterFits: OEM Peg Mount - Requires Motorcycle Specific Peg Adapter
(Sold Separately - pg 54)
7595 Small Trident ISO-Peg without Adapter (pr) $39.99
7596 Large Trident ISO-Peg without Adapter (pr) $39.99
7597 Dually Trident ISO-Peg without Adapter (pr) $65.99
Replacement rubbersFits:Küryakyn Trident Pegs & ISO-Peg Line as Replacement
Rubber Pads
4345 Trident Style Replacement Rubbers for Small ISO-Peg (pr)
$11.99
4338 Trident Style Replacement Rubbers for Large ISO-Peg (pr)
$13.99
4339 Trident Style Replacement Rubbers for Dually ISO-Peg (pr)
$18.99
flamin’ switchblade pegsU.S. Patent 6,893,038 & D593,911
The flip-out heel rest makes a huge difference on
long rides & it's a great addition to our Flame Series.
Motorcycle specific adapter required - pg 54.
Note: Flip out arm designed to be a heel rest.
4412 Flamin’ Switchblade Pegs without Adapter (pr)
$145.99
iso®-footpegsChoose a peg that best suits your style. Motorcycle specific adapter
required - pg 54.
7964 Small ISO-Pegs without Adapter (pr) $36.99
7965 Large ISO-Pegs without Adapter (pr) $38.99
4452 ISO-Wing without Adapter (pr) $93.99
7963 Dually ISO-Pegs without Adapter (pr) U.S. Patent D405,393
$62.99
Note: ISO-Wings are not recommended for passenger applications on bikes with fixed rear peg mounts that angle to the rear. They cannot be folded to the stowed position properly.
see our
entire line of
custom pegs
online!
same great
function with
an updated
look!peg
adapters
pg 54
56 8 7 7 . 3 7 0 . 3 6 0 4
Swings
Forward 3"
7916
4455
2” offset for passenger board mountingGain a new foot position or needed clearance from
saddlebags or exhaust all while keeping your boards tight
to your bike. The mounting splines lock your boards in
secure & maintain the single pivot point at the board.
Fits: All Küryakyn Floorboards for Mounting with Splined
Adapters
Note: Floorboards & Motorcycle Specific Splined Adapter Required for Installation (sold separately pg 58). Not intended for Driver Position Applications.
8837 2” Offset for Passenger Boards (pr) $45.99
swingwing pegsU.S. Patent D560,562
Stretch your legs a little without spending several hundred dollars for
extended controls. The larger foot rest provides full support with a
fold out arm when you want to stretch out. Motorcycle specific splined
adapter required - pg 58.
Note: SwingWing Pegs are larger than stock. In passenger applications pegs may not fold up to stored position properly. Motorcycles with passenger peg mounts that angle to the rear also accentuate the non-folding application.
4467 SwingWing Pegs without Adapter (pr) $155.99
4468 SwingWing Pegs Replacement Rubber Pads (set)
$20.99
Important: Requires Splined Adapter Mounts - pg 58.
switchblade pegsU.S. Patent D506,707 & 6,893,038
Switchblade Footpegs are sleek, versatile, & supremely
comfortable. In their standard compact mode, they are a large
surface-area, rubber-isolated footpeg. Deploy the concealed
heal rest, & now you have the added fatigue-fighting comfort of
the famous Küryakyn ISO-Stirrups. Motorcycle specific adapter
required - pg 54.
4446 Switchblade Pegs without Adapter (pr) $124.99
universal kickstand extensionReach your kickstand with ease with this Universal
Kickstand Extension. Clamps onto kickstands 1/2” to 3/4”
in diameter & extends out either 2-7/8” or 4-3/8”.
Suggested Compatible Models:
Honda: All VTX1300/1800, Fury & VT1300 Custom Line
(Sabre, Stateline, & Interstate)
Kawasaki: Vulcan 1500/1600/2000
Suzuki: C50/C90
Yamaha: All Road Star, all V Star 650/950/1100/1300
Fits: Universal kickstands with 1/2” to 3/4” diameter
7108 Universal Kickstand Extension (ea)
$39.99
iso®–-boardsfor Metric Cruisers
Install a floorboard in place of a footpeg!
These kits include our finely chromed
ISO-Boards equipped with cushy, full length ISO
rubber inserts & a cast bracket to connect the ISO-Board to the slip resistant
splined adapter. We offer two options to suit your style. Please see illustration &
dimensions at right to determine the style that best fits your application. Splined
Adapters required & sold separately - pg 58.
7916 Driver or Passenger ISO-Boards (pr) $199.99
4455 Passenger Only ISO-Boards & Mount Kit (pr) $209.99Note: Passenger applications for P/N 7916 requires 1” clearance from bottom of footpeg mount & exhaust. Sits out 1” farther than stock peg.
For Driver or
Passenger
Importance Notice: Adjustable shift & brake linkage is suggested for driver application. Placing these footboards on mounts intended for footpegs may prohibit them from folding up in the same manner as the stock peg. While the board may be rotated on the mount for a comfortable foot position, some angles may cause the board to contact other components on the bike before the board is folded up completely. Before ordering, be aware of components on the bike that may interfere with the placement of the floorboards.
4455 Configuration
Difference in Mount Configurations
7916 Configuration
1-1/4”
1/2”
57
f l o o r b o a r d s
constellation board footpeg replacement
Add style & comfort in minutes by simply replacing your pegs with these radically
designed Constellation Boards! Mount directly to your standard peg location & gain
adjustments in almost any direction.
• Floorboards intended to fold at mounting block, not at standard footpeg mount.
• Driver & passenger locations allow infinite adjustments within a 2” horizontal section.
• Floorboards rotate completely around splined adapter for optimal leg positioning.
• Choose between stock or raised positions when installing floorboards in the
passenger location.
4457 Constellation Board Footpeg Replacement (pr) Note: Requires Splined Adapter (Sold Separately - pg 58)
$199.99
4358 Constellation Board with Adapter Fits: Küryakyn Male Mount Cruise Peg Applications
$209.99
8-1/2" x 4-1/2"
4351
4351
10” x 4-1/2”
4357
ribbed & premium floorboards for Driver or Passenger Patent Pending
Style, Quality, Function, & Adjustability at a price that can’t be beat. Switching to
floorboards just got easier & with five thoughtfully placed splined mounts, these
boards can be fine tuned just right for the rider or passenger. Available in two
versions; Ribbed, featuring a wrinkle black finished base & Premium, featuring a
brilliant chrome finished base with chrome inlays in the foot pad rubber. Motorcycle
specific adapter required for installation (Sold Separately).
Fits: OEM Peg Mount Location - Requires Motorcycle Specific Splined Adapter (pg 58)
4357 Ribbed Black Floorboards for Driver or Passenger (pr) $129.99
4351 Premium Chrome Floorboards for Driver or Passenger (pr) $159.99
Important Note: Adjustable shift & brake linkage is suggested for driver application. Placing these footboards on mounts intended for footpegs may prohibit them from folding up in the same manner as the stock peg. While the board may be rotated on the mount for a comforable foot position, some angles may cause the board to contact other components on the bike before the board is folded up completely. Before ordering, be aware of compontents on the bike that may interfere with the placement of the floorboards.
Innovative Design Provides Five Mounting Positions to
Choose From
transformer ii passenger boards Patent Pending
Style is nothing without function. Replace those passenger pegs with
the sturdy support of floorboards with integrated fold out passenger
cruise pegs all in one easy step. The perfect 5-3/4” wide by 9-1/4” long
floorboards offer a flip out second foot position 4-1/2” higher & 5-1/2”
farther forward than stock. Add additional adjustment by selecting any
one of 3 mounting positions for that perfect placement. The ribbed black
rubber pads & chrome body coordinate with stock or custom applications
& the installation couldn’t be easier. Simply select the motorcycle specific
Splined adapter for proper installation (sold separately).
Fits: Passenger Peg Locations - Requires Splined Adapter (pg 58 - sold
separately) Requires 5-1/4” of clearance rear of peg mount
Note: VTX1300T/1800T, V Star 950T/1300T, Vulcan 1700 Classic & other applications with saddlebags between 3-1/4”- 5-1/4” away from peg mount may require 2” Offset (P/N 8837 - pg 56) for installation.
4380 Transformer II Passenger Boards (pr) $259.99
flip-out
2nd foot
position!
58 8 7 7 . 3 7 0 . 3 6 0 4
s p l i n e d a d a p t e r s
4596 (Online)
splined adapters for Driver & PassengerFits: Küryakyn Cruise Peg Mounts & Clevises
for Male Mount Splined Adapters for mounting
Küryakyn boards
Note: Not for use on Metric OEM Peg Mounts.
8881 Pivoting Splined Male Mount Adapter (pr)
$21.99
8883 Non- Pivoting Splined Male Mount Adapter (pr) Suggested for installing boards with a folding feature
$21.99
splined adapter mountsSimply select the footrest you desired & the motorcycle
specific adapter for your bike. These splined mounts lock
your footrest in secure.
Rear Splined Adapters Allow Both Folding & Rigid Mount In One! (P/N’s
8818, 8825, 8826, & 8828)
mount these footrests with our splined adapters
4351
4357
4380
4467
7916
44554457
Cruiser Model Year Front Rear
HondaVTX1800C/F ’02-’08 8815/8816* 8818VTX1800R/S/N/T ’02-’08 None 8818VTX1300R/S/T ’03-’09 None 8818VTX1300C ’03-’09 8815 8818VT1300 Sabre/Stateline '10 8815 8818VT1300 Interstate '10 None 8818Fury '09-'10 8815 88181100 Spirit /Sabre ’00-’07 8815 8825750 Shadow Ace/Aero/Spirit/ Phantom/RS
’00-’10 8815 8818
750 Magna ’96-’04 8815 8818600 VLX & Deluxe ’96-’07 8815 8818Valkyrie ’97-’04 None 8825Rebel 250 '96-'10 None 8818
TriumphRocket III All 8813 8808
Can-AmSpyder (All RS Models only) '08-'10 8808 None
Cruiser Model Year Front Rear
SuzukiIntruder 1500 LC/ Boulevard C90
‘98-’09 None 8818
Intruder 1400/ Boulevard S83
‘95-’08 None 8818
Boulevard C50 ‘05-’09 None 8818Boulevard M50 ‘05-’09 8808 8818Volusia/Marauder 800
‘01-’04 None 8818
M109R ‘06-‘09 8808 NoneM90 '09 8808 8818C109 '08-'09 None 8818
VictoryCross Roads All None 8828Hammer All 8828 8828Vegas, 8-Ball, Jackpot
All 8828 8828
Kingpin** All None 8828
Cruiser Model Year Front Rear
YamahaV Star 1300/T ’07-'10 None 8825V Star 1100 ‘99-’09 8814 8818V Star 650 ‘98-’10 8814 8818V Star 950/T '09-'10 None 8818Virago 1100 All 8814 8818Virago 750 All 8814 8818Roadliner ‘06-’10 None 8825Stratoliner ‘06-’10 None 8825Road Star 1600/ 1700 (ex. Warrior)
‘99-’10 None 8818
Road Star Warrior ‘02-’09 8818 8825Royal Star with OEM Rear Pegs ‘96-’01 None 8818Raider ‘08-'10 8818 8825
KawasakiVulcan 1500 A/B ‘87-’99 8813 8826Vulcan 1500/1600 & Mean Streak
‘96-’08 8813 8826
Vulcan 800 Classic ‘96-’05 8813 8826Vulcan 800 Custom ‘95-’05 8813 8826Vulcan 2000 '04-’10 None 8826Vulcan 900 Custom ’06-’10 8813 8826Vulcan 900 Classic ’06-’10 None 8826Vulcan 1700 Classic ’09-’10 None 8826
* Splined Adapter for driver applications requiring P/N 8816 are intended for floorboard applications only.
**Only if using Accessory Peg Mounts from Victory.
Note: Motorcycle specific adapters only work with stock OEM peg mounts.
Sold in Pairs
$21.99P/N 8818 priced at $24.99
8881
8883
59w w w . k u r y a k y n . c o m
floorboard covers Patent Pending
Dress up those drab stock rider (driver) boards with these finely chromed covers.
Rubber inserts add comfort & give your boots a better grip. To install, just peel off
the stock rubber layer, pop the cover into place, & screw the cover onto the stock
board from the bottom.
honda U.S. Patent D562,736
7021 Fits: ’10 VT1300 Interstate, ‘02-’08 VTX1800 with factory Floorboards (Retro, etc) ’03-’09 VTX1300 with factory floorboards (Retro, etc)
$135.99
Kawasaki
7022 Fits: ’03-’08 Vulcan 1600, ’04-’10 Vulcan 2000, All ‘09-’10 Vulcan 1700 Models & ‘09-’10 1700 Voyager Models, Vulcan 900 Classic with OEM floorboards
$135.99
7023 Fits: All Floorboard Model Kawasaki Vulcan 800/1500’s, including Classic, Nomad & Drifter
$119.99
Yamaha U.S. Patent D544,410
7020 Fits: ‘99-’09 V Star 1100 Classic, ‘09-’10 V Star 950/T, ‘07-’10 V Star 1300/T, & all ‘99-’10 Road Star 1600/1700 (except Warrior)
$135.99
7024 Fits: All Roadliner & Stratoliner Models with OEM floorboards $135.99 7024
7022
7020
7021
add matching
shift & brake
pedal covers!
flamed floorboard covers U.S. Patent D589,408
Fashion a flamin’ custom chrome look for your stock floorboards! These covers mount
right over your stock floorboards to make a larger, more comfortable foot position without
reducing your cornering clearance. Coordinate these covers with other Flame Series
accessories for a blazin' look!
7025 Flamed Floorboard Covers (pr) Fits: Yamaha: ’99-’09 V Star 1100 Classic, '09-'10 V Star 950/T, ‘07-’10 V Star 1300/T, ’99-’10 Road Star 1600/1700 (except Warrior) Kawasaki: ’03-’08 Vulcan 1600 Classic/Nomad, ’04-’10 Vulcan 2000, Vulcan 800/1500 (Including Classic/Nomad/Drifter), ‘06-’10 Vulcan 900 Classic, All '09-'10 Vulcan 1700 Models & '09- '10 1700 Voyager Models Suzuki: ‘05-’09 Boulevard C90/C50/C109 Victory: All Victory OEM Driver Floorboards (except Vision, Cross Roads & Cross Country) Note: This product only installs over OEM Factory Floorboards & are larger than OEM Floorboards. Kawasaki Vulcan 900 Classic, Vulcan 1700 Models & 1700 Voyager & Suzuki C90/C50 will not accept Küryakyn Heel Shift Cover (P/N 4029). Will not install on Vulcan 2000 with Kawasaki Engine Guards.
$159.99
7026 Flamed Floorboard Covers for Honda (pr) Fits: Honda: All VTX1800R/S/T/N, VTX1300 Retro/S/T, & VT1300 Interstate Note: This product only installs over OEM Factory Floorboards.
$159.99
60
b r a k e p e d a l p a d s
8 7 7 . 3 7 0 . 3 6 0 4
2-1/4”4036
1-1/2”
1-1/4”
2”
4034
round shift peg coversThis round rubber-lined chrome
shift peg is now offered in two
sizes to accommodate almost any
round shift peg.
8851 Fits: Kawasaki: '09-'10 Vulcan 1700 Models (Toe Only) Vulcan 1500 (Toe Only, Heel P/N 4029) Vulcan 1600 (Toe Only, Heel P/N 4029) Vulcan 2000 (Toe & Heel) Vulcan 900 Custom (Toe Only) Vulcan 900 Classic (Toe Only, Heel P/N 4029) Mean Streak (Toe Only) '09-'10 Voyager 1700 Models (Toe Only)
Suzuki: ’98-’04 Intruder 1500C ‘05-’09 Boulevard C90 & C50 (Toe Only, Heel P/N 4029) '08-'09 C109 (Toe Only) Note: Shift peg position adjustment required for installation of 4029 Heel Shift Cover on C50
Yamaha: Royal Star & Venture (Heel & Toe) ‘07-’10 Road Star (Toe Only) ‘99-’06 Road Star (Heel & Toe) (‘06 Heel Only if OEM Style Round with Rubber) ‘06-’10 Roadliner & Stratoliner (Toe Only) ‘02-’09 Road Star Warrior (Toe Shift & Brake Pad) ‘99-’09 V Star 1100 Classic (Toe Only, Heel P/N 4034), '09-'10 V Star 950/T (Toe Only, Heel P/N 4034) ‘01-’10 V Star 650 Classic (Toe Only, Heel P/N 4034) ‘07-’10 V Star 1300/T (Toe Only, Heel P/N 4034) ‘08-'10 Raider (Toe Shift & Brake Pad)
Universal: Most applications with round shift pegs approximately 2-9/16” long & 9/16” in diameter
$19.99
8852 Fits: Honda: All ’02-’08 VTX1800, ’03-’09 VTX1300C, & '09-'10 Fury, '10 VT1300 Custom Line (Sabre & Stateline)
Universal: Most applications with round shift pegs approximately 2-5/8” long & 9/16” in diameter
$19.99
shift & brake pedal pad coversA slick little chrome & rubber clamshell cover that replaces the stock rubber
pad on brake or heel shift pedals.
4029 Shift & Brake Pedal Cover (ea) Fits: Honda:’96-’07 VLX600 (Brake Pedal) ’01-’09 750 Spirit (Brake Pedal) ’96-’04 750 Magna (Brake Pedal) ’02-’07 1100 Sabre (Brake Pedal) ’97-’99 1100 ACE (Brake Pedal) ’96-’07 1100 Spirit (Brake Pedal) ’04-’10 Shadow 750 Aero & Phantom (Brake Pedal) '96-'09 250 Rebel (Brake Pedal)
Kawasaki: ’86-’06 Vulcan 750 (Brake Pedal) ’03-’08 Vulcan 1600 (Heel Shift) ‘96-’08 Vulcan 1500 (Heel Shift) ‘06-’10 Vulcan 900 Classic (Heel Shift) ‘07-’10 Vulcan 900 Custom (Brake Pedal)
Suzuki: ’01-’04 Volusia 800 (Brake Pedal) ’02-‘09 Marauder 800/Boulevard M50 (Brake Pedal) ’98-‘09 Intruder 1500LC/Boulevard C90 ‘05-’09 Boulevard C50 Note: Shift position may need to be adjusted to accept P/N 4029 Heel Shift.
Yamaha: ’98-’10 V Star 650 Custom (Brake Pedal) ’99-’09 V Star 1100 Custom (Brake Pedal) ’98-’00 V Star 650 Classic (Brake Pedal)
$31.99
4045 Brake Pedal Cover (ea) Kawasaki: ‘02-’08 Mean Streak ModelsSuzuki: ‘04-’06 Marauder 1600/Boulevard M95 Models
Yamaha: ’06-’10 Roadliner & Stratoliner ‘07-’10 V Star 1300/T '09-'10 V Star 950/T ‘01-’10 V Star 650 Classic '00-’09 V Star 1100 Classic ‘96-’10 Royal Star with 2” x 3-1/8” Rubber Pad
$31.99
shift peg coversReplace the drab rubber OEM shift peg pads with classic chrome! Simple hassle-free
installation.
4034 Fits: Yamaha: ’98-’00 V Star 650 Classic (Toe), ‘98-’10 V Star 650 Custom (Toe), ‘01-’10 V Star 650 Classic (Heel Only, Toe P/N 8851), ‘99-’09 V Star 1100 Classic (Heel only, Toe P/N 8851), ‘99-’09 V Star 1100 Custom (Toe), '09-'10 V Star 950 (Heel Only, Toe P/N 8851), ‘07-’10 V Star 1300 (Heel Only, Toe P/N 8851) Universal: Most applications with an oval shift peg with a width of 5/8” or less
$19.99
4036 Fits: Honda: ’04-’10 Shadow 750 Aero & Phantom Universal: Most applications with an oval shift peg with a width of 5/8” or slightly larger
$19.99
4047 Fits: Honda: ‘03-’09 VTX1300 Retro/S/T & '10 VT1300 Interstate (Heel & Toe)
$19.99
iso®-brake pedal padBeautiful chrome with rubber inserts for
a non-slip surface.
Fits: ’88-’00 GL1500 & all Valkyrie Models
(except Rune)
4025 IS0-Brake Pedal Pad (ea)
$31.99
8081 Replacement Rubber Pads (set)
$10.99
61w w w . k u r y a k y n . c o m
quick reference Shift & Brake Fitment Chart
flamin’ brake pedal padStoke up the fire with this Flamin’ Brake Pedal &
set the streets ablaze!
7518 Fits: Kawasaki: ’96-’08 Vulcan 1500, ’05-’08 Vulcan 1600 Classic, all Vulcan 2000, ’06-’10 Vulcan 900 Classic, all '09-'10 Vulcan 1700 & all '09-'10 Voyager 1700 Suzuki: ’05-’09 Boulevard C50, & ’98-’04 Intruder 1500LC Yamaha: All ’99-’10 Road Star Models (except Warrior)
$39.99
Note: Requires ability to drill a 3/8" bolt hole in center of brake pedal.
brake pedal padThis is one of our most popular parts that can be easily
adapted for use on several Cruisers. Simply drill one hole in
your existing rear brake pedal.
8857 Fits: Kawasaki: ’96-’08 Vulcan 1500, ’05-’08 Vulcan 1600 Classic, all Vulcan 2000, ’06-’10 Vulcan 900 Classic, all '09-'10 Vulcan 1700 & all '09-'10 Voyager 1700 Suzuki: ’05-’09 Boulevard C50, & ’98-’04 Intruder 1500LC Yamaha: All ’99-’10 Road Star Models (except Warrior)
$31.99
8082 Replacement Rubber Pads (set/3) $10.99Note: Requires ability to drill a 3/8" bolt hole in center of brake pedal.
CruiserModel
Toe Shifter
Heel Shifter
Brake Pedal
KawasakiVulcan 2000 8851 8851 8857
‘05-’08 Vulcan 1600 8851 4029 8857
‘03-’04 Vulcan 1600 8851 4029 8850, 8857
Vulcan 1500 8851 4029 8850, 8857
Vulcan 900 Custom 8851 None 4029
Vulcan 900 Classic 8851 4029 8857
HondaVTX1800R/S/N/T 8852 8852 8849
VTX1800C/F 8852 None None
VTX1300R/S/T 4047 4047 8849
VTX1300C 8852 None None
Shadow 750 Aero/Phantom 4036 None 4029
SuzukiBoulevard C50 8851 4029 8857
Boulevard C90 8851 4029 NoneNote: Confirm motorcycle fitment & check additional notes with matching P/N on pages 60-61.
CruiserModel
Toe Shifter
Heel Shifter
Brake Pedal
Yamaha’07-’10 Road Star 1700 (except Warrior)
8851 None 8858
‘99-’06 Road Star 1600/1700 (ex. Warrior)
8851 8851 8858
Road Star Warrior 8851 None 8851
V Star 1300/T 8851 4034 4045
V Star 1100 Classic 8851 4034 4045
V Star 1100 Custom 4034 None 4029
V Star 950/T 8851 4034 4045
‘01-’10 V Star 650 Classic 8851 4034 4045
‘98-’00 V Star 650 Classic 4034 None 4029
V Star 650 Custom 4034 None 4029
‘06-’10 Roadliner 8851 None 4045
‘06-’10 Stratoliner 8851 None 4045
‘08-'10 Raider 8851 None 8851
8850
brake pedal cover Add the smooth lines of this chromed brake pedal. This clamshell design installs in minutes & shows a
noticeable difference from the plain stock rubber look. Add our Floorboard Covers & Shift Peg Cover to
really transform the look of your foot controls.
Yamaha
8858 Fits: All ‘99-’10 Road Star 1600/1700 Models (except Warrior) $31.99
VTX
8849 Fits: ’03-’09 VTX1300 Retro/S/T & ’02-’08 VTX1800 Retro/S/N/T Models &
‘10 VT1300 Interstate Only
$31.99
Vulcan
8850 Fits: All Vulcan 1500 & ‘03-’04 Vulcan 1600 Classic Models (‘05-’08 Vulcan 1600 use P/N 8857)
$31.99
8858 8849
62 8 7 7 . 3 7 0 . 3 6 0 4
c r u i s e p e g s
Adjustable
Stretch
Out!
3-1/4"
2-1/2"8016
adjustable mustache bar for YamahaGet highway pegs without needing a bulky or intrusive engine guard.
Mount cruise pegs exactly where you desire to fit any rider. Mount
the bar up or down the down tubes & rotate the bar to move the
pegs forward or back. Accepts H-D style male-mount pegs (pg 67).
Fits: All ’99-’10 Yamaha Road Star, ‘08-’10 Raider Models, ‘06-’10
Roadliner & Stratoliner, & All ‘98-’10 V Star 650 Models
7548 Adjustable Mustache Bar (ea) $169.99Note: Pegs fold up stowed when not needed. Not suggested for use with full size engine guards.
adjustable cruise pegs for Yamaha U.S. Patent D405,393 & D411,440
Add additional Dually pegs
to your liking. Individually
mounting to each down
tube, adjust the offset
X-tension to dial in your
peg location. Ride on in
style & comfort.
cruise peg mounts for VTX
Add cruise pegs without adding a bulky engine guard. These mount
plates simply bolt onto the existing mounting bosses for a sturdy,
comfortable “stretched out” setup that is also pleasing to the eye.
Pegs sold separately - pg 66.
4518 Fits: ’02-’08 VTX1800C/F (pr) Note: Does not work with Forward Control Extension Kit (P/N 4590).
$149.99
4519 Fits: ‘03-’09 VTX1300 Retro/S/T & ‘04-’09 VTX1300C Models (pr)
$149.99
longhorn offset peg mountThis stylish peg mount provides 360˚ adjustability so it can
be used to position the peg closer to the rider or further
away. Its 3-1/4” arm gives an incredible 6-1/2” range of
adjustment. Incorporating an innovative locking device, this
mount is guaranteed not to slip.
8016 Longhorn Offset Peg Mounts (pr) For use with Magnum Quick Clamps only - pg 65.
$72.99
7986 Longhorn Offset with 1-1/4” Clamp (pr) U.S. Patent D411,440
$114.99
Note: Male Mount Pegs sold separately - pg 67.
Fits: All ‘99-’10 Road Star 1600/1700, ‘02-’09 Road Star Warrior,‘06-’10 Roadliner/
Stratoliner, ‘99-’09 V Star 1100, ‘09-‘10 V Star 950, all V Star 650, ‘08-’10 Raider
(Requires 1-1/4” of available round space on both front frame tubes)
4501 Cruise Pegs for Yamaha (pr) $189.99Note: Not suggested for use with full size engine guards.
adjustable cruise peg mounts for Floorboards
Add the comfort of cruise pegs & keep that clean simple style with these
Adjustable Cruise Peg Mounts. These little beauties bolt directly onto your
floorboards & allow full adjustability for optional foot positions. Add any of
Küryakyn's Male Mount Pegs & ride on!
4549 Adjustable Cruise Peg Mounts (pr) Fits: Yamaha: Road Star & V Star 950, 1100, & 1300 with stock floorboards
$169.99
4579 Adjustable Cruise Peg Mounts (pr) Fits: Kawasaki: All Vulcan 1600/2000 Models, All ‘09-’10 Vulcan 1700 Models & 1700 Voyager Models ,& all Vulcan 900 Classic with stock floorboards (pr)
$176.99
Note: Male Mount Pegs sold separately - pg 67.
cruise peg mounts for honda Floorboards
Add our Cruise Peg Mounts to your stock driver floorboards & you'll
have the best of both worlds. A comfy board & a cruise peg to stretch
out the kinks on a long ride. You won’t believe the difference. Pegs
sold separately - pg 67.
Fits: ’02-’08 VTX1800R/S/N/T, ‘03-’09 VTX1300R/S/T Models &
‘10 VT1300 Interstate
4540 Cruise Peg Mounts for Honda with OEM Floorboards (pr)
$159.99
Adjustable
4519
4518
63w w w . k u r y a k y n . c o m
45224523
Küryakyn Offset or Longhorn
Offset Highway Pegs Allow
Infinite Adjustment to Make
Any Size Rider Comfortable!
Tall
In-Between
Tall
Short
4575
+ =One Bike Offset or Longhorn Offset Highway Pegs
tall, short, or in-between?we have you covered!
Comfortable Cruising for Any Size Rider!
longhorn offset highway pegsU.S. Patent D405,393 & D411,440
The all-in-one answer for long-haul comfort. We
combined our most popular highway peg
components into one product that’s attractive,
adjustable, & easy to install.
4574 Longhorn Offset Dually with 1-1/2” Magnum Quick Clamp (pr)
$159.99
4575 Longhorn Offset Dually with 1-1/4” Magnum Quick Clamp (pr)
$159.99
tour-techtm cruise mounts for 1-1/4” Engine Guards
Tour-Tech Cruise Mounts offer an incredible range of adjustability. Move the entire assembly up or
down on the engine guard, pivot the arm up or down, & rotate the entire assembly in or out. Ideal
for Touring Models with fairing lowers (including trikes) or any model using 1-1/4” engine guards.
tall riders (Short Arm)
4520 Mounts Only, No Pegs (pr) $109.99
4522 With ISO-Wings (pr) $199.99
4523 With Dually Pegs (pr) U.S. Patent D405,393
$179.99
short to average height riders (Long Arm)
4526 Mounts Only, No Pegs (pr) $109.99
4528 With ISO-Wings (pr) $199.99
4529 With Dually Pegs (pr) $179.99
offset highway pegs
U.S. Patent D405,393 & D411,440
These unique offset mounts provide a full range of
peg adjustment with 360˚ rotation in a 4” diameter
circle to accommodate tall, short, or average
height riders. These can be installed on any round
tubing (frames or engine guards). Note: requires
vertical tube for mounting, Tubes that angle in or
out we suggest our right angle mounts (online) or
adapters with Adjustable stop (pg 64) to maintain a
level peg position.
Small ISO®-Pegs:
7998 with 1-1/4” Diameter Clamps (pr) $124.99
Large ISO®-Pegs:
7999 with 1-1/4” Diameter Clamps (pr) $135.99
7933 with 1.35” Diameter Clamps (pr) Note: Work great on Kawasaki front frame tubes.
$124.99
PilotTM Pegs:
4438 with 1” Diameter Clamps (pr) $145.99
4436 with 1-1/4” Diameter Clamps (pr) $145.99
Dually ISO®-Pegs: U.S. Patent D405,393
7976 with 1” Diameter Clamps (pr) $145.99
7966 with 1-1/8” Diameter Clamps (pr)
$145.99
7993 with 1-1/4” Diameter Clamps (pr)
$145.99
7920 with 1.35” Diameter Clamps (pr) Note: Work great on Kawasaki front frame tubes.
$139.99
incredible range
of adjustability!
7998
7999
7993
360˚ Of Adjustability
for Tall, Short &
In-Between Riders!
64 8 7 7 . 3 7 0 . 3 6 0 4
4050
4040
4052
universal cruise peg mounts U.S. Patent D411,440
Although we can’t understand why anyone wouldn’t want
to use our pegs, this setup will allow the use of any H-D or
Küryakyn Male Mount Pegs with our innovative Magnum
Quick Clamps & Clevises for engine guard applications.
4573 1-1/2” Magnum Quick Clamp with Clevis (pr)
$72.99
7944 1-1/4” Magnum Quick Clamp with Clevis (pr)
$72.99
4576 1” Magnum Quick Clamp with Clevis (pr)
$72.99
Note: Male Mount Pegs sold separately - pg 67.
footpegs with clevis & magnumtm quick clamps U.S. Patent D411,440
Our most popular cruise pegs! With the trusted Magnum Quick Clamp,
install on any round tubing (frames or engine guards). Keep in mind
that the footpeg itself will end up perpendicular to the bar to which it is
mounted. If your engine guard is angled in such a way that the peg will
not be level once installed, look to our Right Angle Mounts (Online) &
Male Adapters with Adjustable Stop (Right).
Small ISO®-Pegs
8030 with Clevis & 1” Diameter Clamps (pr) $99.99
8032 with Clevis & 1-1/4” Diameter Clamps (pr) $99.99
Large ISO®-Pegs
8031 with Clevis & 1” Diameter Clamps (pr) $103.99
8033 with Clevis & 1-1/4” Diameter Clamps (pr) $103.99
Dually ISO®-Pegs U.S. Patent D405,393
4510 with Clevis & 1” Diameter Clamps (pr) $135.99
7992 with Clevis & 1-1/4” Diameter Clamps (pr) $135.99
PilotTM Pegs
4435 with Clevis & 1-1/4” Diameter Clamps (pr) $129.99
Switchblade Pegs U.S. Patent D506,707 & 6,893,038
4443 with Clevis & 1-1/4” Diameter Clamps (pr) $189.99
ISO®-Wing Pegs
4451 with Clevis & 1-1/4” Diameter Clamps (pr) $145.99
ergotm cruise pegs for Valkyrie or GL1500
Ergonomically designed for maximum driver comfort, these mounts have an
unbelievable range of adjustment for the tall, short or in-between rider. The 6”
long adjustable chrome arm has an ingenious locking mechanism & is canted at
a 6˚ angle which angles the pegs just the right amount for ideal comfort.
Fits: All Valkyrie (except Interstate or Rune) & ’98-’00 GL1500 Models
4050 Ergo with Dually ISO-Pegs (pr) U.S. Patent D405,393 $199.99
4040 Ergo with Lighted Cruise Boards (pr) $289.99
4041 Ergo with Un-Lighted Cruise Boards (pr) $270.99
4052 Ergo with ISO-Wings (pr) $218.99
4060 Short Replacement Ergo Arm, 4-1/2” (pr) $49.99
4061 Long Replacement Ergo Arm, 6” (pr) $49.99Note: To change existing Ergo's with Floorboards to Pegs, we suggest P/N 8061 (pg 65) & Pegs (pg 67).
serrated male mountfor Cruise Pegs
8880 Serrated Male Mount (pr)
$19.99
8033
7992
8032
1-1/2”
4443
4435
4451
male footpeg adapters with Adjustable StopChange the horizontal angel of your cruise pegs with this
slick adjustable male adapter. Perfect for raising cruise
peg ends up or adjusting for engine guards that slightly
angel in at the bottom.
Fits: Küryakyn Cruise Peg Mounts or Mounting Clevises
8008A Male Footpeg Adapters with Adjustable Stop (pr)
$19.99
Adjust Your
Highway Peg
Angle!
65w w w . k u r y a k y n . c o m
Mounts Great
with Magnum
Quick Clamps
3"
1-1/8"
1-1/4"
3-1/2"
1-1/4"
8088
4568
8015
8061
7996
Magnum Quick Clamp Sold Separately
magnumtm quick clampsU.S. Patent D411,440
We’ve made a lot of friends with these.
Stainless steel construction for superior
strength & hinged construction for fast
simple installation. No more stripped bolt
heads common of 3-piece designs.
1000 1-1/4” I.D. (pr) $42.99
1001 1-1/2” I.D. (pr) $42.99
1002 1” I.D. (pr) $42.99
7942 1.35” I.D. (ea) $23.99
8073 1-1/4” I.D. (ea) $23.99
7941 1-1/8” I.D. (ea) $23.99
7940 1” I.D. (ea) $23.99
footpeg mounts & mounting clevisesAll footpeg mounting clevises & footpeg mounts listed perform the same
function. Your decision will be determined by the length required & the
style you prefer.
4568 Serrated Replacement Clevis with Hardware (ea) $21.99
7996 Offset Peg Mounts (pr) $51.99
8088 3-1/2” Long 1/2”-13 Thread (pr) $39.99
8061 Short Magnum Peg Mount with 1/2”-13 Thread (pr) $31.99
8015 Clevis with 1/2”-20 Thread (pr) $19.99
long right angle mounts with longhorn iso®-pegsThis mount is the answer for installing highway pegs on frame downtubes.
The right angle design allows the peg to be positioned horizontally
regardless of the angle of the frame downtube. The added length of the
Longhorn Peg makes for incredible comfort. Select the correct size Magnum
Quick Clamp for your application (Left) or Online - sold separately.
7539 Long Right Angle Mounts with Longhorn ISO-Pegs (pr) $99.99
engine guardwith Fixed Footrests for VTXEnjoy stretched out cruising comfort & a degree of engine protection without
obtrusive looks. We’ve honed this popular cruise peg/engine guard combo
into a simpler product by using a new static peg design. The legendary
comfort & clean low profile styling is untouched. Enjoy the evolution of this
great system at a new lower price!
4581 Fits: All VTX1800 Models (set) $259.99
4582 Fits: All VTX1300 Models (set) $259.99Note: Not compatible with Cruise Peg Mounts (P/N’s 4518 & 4519).
Accepts All
Male Mount
Pegs - pg 67
e n g i n e g u a r d s
ergotm engine guard for VTXU.S. Patent 7,073,808 & 6,969,083
Bringing innovative design to the limits, our Ergo
Engine Guard combines a stylish engine guard with
built-in highway pegs. These highway pegs can be
used in the stock inner position or flipped out for
an additional foot position option. For those of you
with driver pegs add the optional Forward Control
Relocation Kit (Found Online) & stretch out your
legs for additional comfort. Relocation Kit moves
foot controls forward 2”.
4502 Fits: All VTX1800 Models (set) $329.99
4587 Fits: All VTX1300 Models (set) $339.99Note: Not compatible with Cruise Peg Mounts (P/N’s 4518 & 4519).
Prototype Shown
66 8 7 7 . 3 7 0 . 3 6 0 4
p a s s e n g e r c o m f o r t
swingwing pegs U.S. Patent D560,562
Create a floorboard-like feeling for your legs! Give your
passengers the comfort they desire. The SwingWing Peg
provides a larger footpad for a fully supported feeling
& has a swing-out footrest arm that provides a 3”
forward & 3” wider secondary foot position. Requires
Splined Adapter - pg 58.
4467 SwingWing Pegs Without Splined Adapter (pr)
$155.99
Note: SwingWing Pegs are Larger than stock. In passenger applications pegs may not fold up to stored position properly. Motorcycles with passenger peg mounts that angle to the rear accentuate the non-folding application. Flipped out footrest arm is not intended to be used as a step when mounting or dismounting the motorcycle.
Swings
Forward 3"
peg mounted cruise mountsYou wanted the simplest highway pegs & here they are.
Directly mounting to your stock footpeg mounts, these
offer a 6" adjustable arm to let you extend your legs where
you want. Complete your kit with desired stylish Küryakyn
pegs & splined adapter & ride on with added comfort.
Additional Products Required:
• Küryakyn Footpegs with Male Mount (pr) pg - 67
• Küryakyn Footpegs without Male Mount (pr) pgs 52-53
• Motorcycle Specific Splined Adapter (pr) pg - 58
7887 Peg Mounted Cruise Mounts (pr) $159.99Note: Original foot position only accepts the following Küryakyn Pegs: Stiletto (P/N 4476), Switchblade (P/N 4446), Dually (P/N 7597 & 7963), Large ISO (P/N 7596 & 7965), Small ISO (P/N 7595 & 7964), Retro (P/N 4401), Pilot (P/N 4419), ISO-Wing (P/N 4452), Sweptwing (P/N 4464), Flamin' (P/N 4417). Stock OEM pegs will not work with this product. Cruise Mounts include Küryakyn male mount style adapter for aftermarket cruise peg applications only.
retractable passenger pegs for Metric Cruisers Patent Pending
Just like you can with the addition of highway pegs, your passenger can kick back & relax
by adding a second peg position that can be rotated forward when in use & out of the way
when not. Combining elegant style & function, the 6-1/2” arm features a splined mount
& rotating arm that allows complete control over the second peg position. Trident pegs
included for retractable arm & available with Trident peg in stock location or choose to
mount a set of Küryakyn Floorboards.
Fits: Stock Passenger Peg Mount Location - Requires Motorcycle Specific Splined Adapter
for Installation (pg 58) - Requires 7” of clearance rear of peg mount
Note: VTX1300T/1800T, Vulcan 1700 Classic & other applications with saddlebags between 5” - 7” away from peg mount require 2” Offset (P/N 8837 - pg 56) for installation.
4388 Retractable Passenger Pegs with Mount for Floorboards (pr) Note: Floorboards mount directly to main peg position. Floorboards Sold Separately - Below & pg 57.
$169.99
4389 Retractable Passenger Pegs with Pegs (pr) $189.99
add floorboards to your retractable passenger pegs & your passenger will never want to stop riding!
premium floorboards for driver & passenger Attaches to Retractable Passenger
Pegs (P/N 4388) without additional
mounting components.
4351 Premium Floorboards for Driver & Passenger Patent Pending
$159.99
kick back
& relax!
N E W f o r 2 0 1 0 . . .
transformer ii floorboards Style is nothing without function. Replace
those passenger pegs with the sturdy support of floorboards. See pg 57
P/N 4380
For
Driver or
Passenger!
Add a
2nd Foot
Position!
5-1/2” X 4/13/16”
67w w w . k u r y a k y n . c o m
m a l e m o u n t p e g s
4450
8000
8002
4425
8028
stiletto pegs4475 Stiletto Pegs, Male Mount (pr) $103.99
mini dagger pegs
7521 Mini Dagger Pegs, Male Mount (pr)
$79.99
switchblade pegsU.S. Patent 6,983,038 & D506,707
4445 Switchblade Pegs, Male Mount (pr)
$135.99
swingwing pegs U.S. Patent D560,562
4466 SwingWing Pegs, Male Mount (pr) $169.99
flamin’ pegs U.S. Patent D593,911
4416 Flamin’ Pegs, Male Mount (pr)
$103.99
iso®- sweptwing pegs
4463 ISO-Swept Wing Pegs, Male Mount (pr)
$79.99
kaisertm pegs
U.S. Patent D528,477 4460 Kaiser Pegs, Male Mount (pr) $103.99
zombietm pegs4470 Zombie Pegs,
Male Mount (pr)$103.99
widow® pegs4491 Widow Pegs,
Male Mount (pr)$103.99
liberator®
pegs 4595 Liberator Pegs, Male
Mount (pr)$124.99
4597 Liberator Stirrups with Pegs, Male Mount (pr)
$176.99
flamin’ switchblade pegs U.S. Patent 6,893,038, & D593,911
4411 Flamin’ Switchblade Pegs, Male Mount (pr)
$159.99
trident pegs 7590 Small Trident ISO-Peg,
Male Mount (pr)$49.99
7591 Large Trident ISO-Peg, Male Mount (pr)
$49.99
7592 Dually Trident ISO-Peg, Male Mount (pr)
$75.99
iso®-pegs8000 Small ISO-Pegs, Male Mount (pr) $46.99
8002 Large ISO-Pegs, Male Mount (pr) $48.99
8028 Dually ISO-Pegs, Male Mount (pr) U.S. Patent D405,393
$72.99
4450 ISO-Wings (pr) $103.997591
7592 7590
68
f r o n t e n d
ch
ro
me
Front End | pg 68
Engine | pg 70
Rear End | pg 73
License Plates | pg 76
lower fork skins for VTX 1800Create a shining first impression! Whether parked or in
motion, your front end is often the first thing people notice
on your bike. Show it in it’s best light with these attention
grabbing chrome Lower Fork Skins. Used alone or with our
other chromed front end components, they will reflect well
on you & your VTX.
Fits: All ’02-’08 VTX1800 Models
8684 Lower Fork Skins (pr) $135.99
8684
8687
upper fork
covers
found online
front caliper cover for HondaSpring to life your front caliper with brilliant chrome.
Installation is a snap with peel-&-stick adhesive &
coordinates great with rear caliper cover.
1282 Fits: All‘03–’09 VTX1300 Retro/S/T Models & '08-'10 Shadow 750 Aero Models
$39.99
1284 Fits: All‘03–’09 VTX1300C Models & '08-'10 Shadow 750 Spirit/ Phantom Models
$39.99
lower fork skinsfor VTX1300 & Vulcan 1600 Nothing gets noticed like a nice front end - so do it right with Küryakyn Lower
Fork Skins! Sleek & stylized, these covers effortlessly apply a glistening layer
of chrome to your plain stock fork sliders. Very easy installation!
8687 Lower Fork Skins for VTX (set) Fits: All ’03-’09 VTX1300C
$169.99
8689 Lower Fork Skins for VTX (pr) Fits: ’03-’09 VTX1300 Retro/S/T Note: Does not include Upper Covers above fender mount bolts in order to maintain clearance for OEM fork shrouds.
$145.99
69w w w . k u r y a k y n . c o m
neck cover for V Star 1100A stunning replacement for the dull, stock, black components found on
your bike. The chrome-plated contours have been smoothed & molded to
provide a flowing appearance. The right side
cover has a stylized teardrop shaped
boss that surrounds the ignition
switch & leaves just its outer
surface exposed. Simple
installation.
Fits: All ’99-‘09 V Star 1100
Models
7856 Neck Cover (set)
$79.99
triceptor fender accent Class up your front fender
& cover unsightly stone
chips. Peel-&-stick as a
fender tip or move it up
the fender to provide a
fender accent.
Fits: Honda: All VTX1300/1800, ‘10 VT1300 Custom Line
Yamaha: All V Star 1300/1100/650, all Road Star, all
Roadliner/Stratoliner, & Raider
Universal: 4” or wider style fenders (does not fit fenders
with flat center width)
7340 Triceptor Fender Accent (ea) $41.99
fender ornamentsLet your front fender take on new life with
one of our majestically sculpted fender ornaments.
Fits: Universal applications require drilling holes in fender &
hard wiring for installation
9026 Eagle Fender Ornament (ea) $45.99
Front
& Rear
fender louvers for VTXPerfectly molded 3 dimensional chrome front & rear fender
accents add the little sparkle you need.
Fits: All ’03-’09 VTX1300 Retro/S/T & all ’02-’08 VTX1800
Retro/S/T Models
9018 Front Fender Louvers (set) $29.99
9019 Rear Fender Louvers (set) $29.99
caliper coverThis wicked looking Caliper
Cover installs in minutes. No
tools required.
rear brake caliper cover for VTX1300Flow chrome over that Rear Brake
Caliper Cover & make it sparkle!
Easy installation.
Fits: All ’03-’09 VTX1300 Models
1288 Rear Brake Caliper Cover (ea)
$39.99
rear caliper coverFinish off that rear brake with our pure custom looking Rear
Caliper Cover. You won’t believe the difference!
1289 Rear Caliper Cover (ea) Fits: ‘06-’09 Suzuki M109R Models
$29.99
attitude medallionsAdd some personalized attitude! Mount them anywhere for a universal install
to any flat surface.
Fits: Universal peel-&-stick applications - Requires a 4-1/2” diameter flat surface
Yamaha: All ’06-’10 Roadliner & Stratoliner & ’08-’10 Raider Left Tranny Cover & Front Drive
Hub Cover, & all ’07-’10 V Star 1300 & ’09-’10 V Star 950 Front Drive Hub Cover Only
3797 Zombie (ea) Patent Pending
$17.99
3796 Widow (ea) Patent Pending
$17.99
3797
1294 Front Caliper Cover (ea) Fits: Kawasaki: All Vulcan 900/1500/1600 Suzuki: 800 Volusia/Boulevard C50/M50 Yamaha: V Star 1100/1300, & Royal Star Venture
$20.99
3798 Chauvinist (ea) $17.99
3799 Patriot (ea) Patent Pending
$17.99
37973799
37963798
eyes
light up!
70 8 7 7 . 3 7 0 . 3 6 0 4
marquis choke knob cover U.S. Patent 5,836,214
Installs easily without removing or modifying the stock choke knob.
Fits: Honda: All VTX1300, '04-’09 Shadow 750 Aero/Spirit C2
Kawasaki: Vulcan 800/1500/1600
Yamaha: '99-’07 Road Star 1600/1700 & All Royal Star Venture, V Star 650/1100
2009 Marquis Choke Knob Cover (ea) $29.99
petcock cover for VTX1300Add the finishing touch to your drab fuel petcock by covering
those unfinished parts with style. The left side of your tank will
now look high class.
Fits: All '03-’09 VTX1300 Models
7830 Petcock Cover for VTX1300 (ea) $39.99
zombietm medallionsStick them on your motorcycle, toolbox,
car, computer monitor-anywhere you think
their sinister faces will brighten your day.
1491 Large Zombie (pr) Requires 2” of flat surface for mounting
$15.99
1492 Small Zombie (pr) Requires 1” of flat surface for mounting Note: Replacements for Küryakyn P/N’s 7411, 7412 7520, 7521, & 8712.
$14.99
3797 Zombie Medallion (ea) Fits: Universal for peel-&-stick applications - Requires a 4 -1/2" diameter flat surface Yamaha: All '06-'10 Roadliner & Stratoliner, '08-'10 Raider Left Transmission Cover & Front Drive Hub Cover, all '07-'10 V Star 1300 & '09-'10 V Star 950 Front Drive Hub Cover Only
$17.99
Stick 'Em
Anywhere!
engine cover inserts for HondaDress up your plain chrome engine covers with these racy,
speed-lined Engine Cover Inserts. Sold in sets of 3, our
molded ABS chrome-plated inserts stick to the smooth clutch,
timing, & left crankcase covers adding depth & a machined
from billet look. Easily installed without tools.
7707 Engine Cover Inserts (set/3) Fits: All ‘02-’08 VTX1800 Models
$69.99
7708 Engine Cover Inserts (set/3) Fits: All ‘03-’09 VTX1300 Models & all ‘09-'10 Fury Models, All '10 VT 1300 Custom Line (Sabre, Stateline & Interstate)
$69.99
clutch housing shroud for VTX1800Finish the job started by our Engine Case Covers. This
beauty perfectly covers the exposed upper surface of the
clutch housing.
Fits: All ’02-’08 VTX1800 Models
7709 Clutch Housing Shroud (ea) $59.99
Note: Intended for use with our Engine Case Covers (P/N 7704) only.
1492
1491
3797
N E W f o r 2 0 1 0 . . .
attitude medallions Add attitude & style the easy way! Multiple theme
options so you can express yourself any way you want. See pg 69
P/N 3799
finish it
off in
style!transmission cover set for ValkyrieThe shine from your Valkyrie will be blinding! Put
the finishing touch on the otherwise dull looking cast
transmission case.
Fits: All Valkyrie Models (except Rune)
7710 Transmission Covers for Valkyrie (pr) $169.99
71w w w . k u r y a k y n . c o m
e n g i n e
engine case coversfor VTX1800Complete the creamy, luscious appearance of your VTX1800 with these
ultimate Engine Case Covers! Fit snugly along the base of the engine
below the fins on both sides. They look like expensive chromed-engine
cases, but they bolt on in minutes & cost a heck of a lot less.
Fits: All ‘02-’08 VTX1800 Models
7704 Engine Case Covers $199.99
engine case covers For HondaAmaze everyone with the look of a new show-stopping chrome
motor on your VTX1300 & VT 1300 custom or Fury. See both sides
of your motor & even your clutch sparkle with chrome. No more
drab gray areas around the heart of your motor any more.
7703 Fits: All ‘03-’09 VTX1300 Models $199.99
7731 Fits: All '09-'10 Fury, All '10 VT 1300 Custom Line (Sabre, Stateline, & Interstate)
$199.99
covers both
right & left
sides of your
engine!
72 8 7 7 . 3 7 0 . 3 6 0 4
cylinder base coversfor Road StarFlow chrome across the left side of your motor & atop your transmission to get
that expensive chromed motor look in minutes! Add our Tappet Block Covers
(P/N 7728) for enhanced sparkle on the right side. You will be amazed at the
difference these make.
Fits: All ‘99-’10 Road Star 1600/1700 & ‘02-’09 Road Star Warrior Models
7729 Cylinder Base Covers (set) $99.99Note: Fully dress your motor with additional Yamaha OEM chrome motor covers.
tappet block covers for Yamaha
Add some sparkle to the right side of your motor with these stylized
chrome Tappet Block Covers & trim piece. Bolt directly over the bottom of
your pushrod tubes & stand back to admire the chrome flowing from your
pushrod tubes all the way down your bike. Add the Cylinder Base Covers (P/N
7729) to complete the new chromed base of your motor.
7728 Tappet Block Covers (set) Fits: All ‘99-’10 Road Star 1600/1700 & ‘02-’09 Road Star Warrior Models
$89.99
7726 Tappet Block Covers (pr) Fits: ‘06-’10 Roadliner/Stratoliner, ‘08-’10 Raider, all ‘99-’10 Road Star 1600/1700, & ‘02-’09 Road Star Warrior Models (Includes 1 pair of Tappet Block Bottom Accents only- no lower trim)
$69.99
Rendering Shown
shift rod linkages for YamahaSharp replacements for the plain-Jane stock linkage. Only
improved by adding more matching theme series accessories.
Fits: All ’99-’10 Road Star 1600/1700 (except Warrior) & ’08-’10
Raider Models
1076 Flame Shift Rod Linkage (ea)
$89.99
1061 Widow Shift Rod Linkage (ea)
$89.99
1062 Zombie Shift Rod Linkage (ea)
$89.99
Note: See page 154 for additional information & coordinating Cylinder Base Covers.
1076
L o o k s G r e a t W i t h . . .
flamed tube accents Customize your pushrod tubes or other tubes
with these red hot chromed metal flames. See www.kuryakyn.com
P/N 7762
Red Hot!
73
r e a r e n d
w w w . k u r y a k y n . c o m
(Part located on other side)
Products shown on VTX1300
drive shaft cover for VTX U.S. Patent D549,622
Compare our Drive Shaft Cover to others on the market. This
setup sets a whole new standard. Two-piece, chrome-plated
stamped steel construction covers both the differential & shaft
tube giving the appearance of a completely chromed assembly.
Fits: All ‘03-’09 VTX1300 & ’02-’08 VTX1800 Models
8285 Drive Shaft Cover for VTX (ea) $139.99
drive hub top cover for VTX Add this sparkling top cover to the gleaming Chrome Drive
Shaft Cover (P/N 8285) to complete the transformation of your
drive shaft to complete chrome.
Fits: All Honda VTX1300/1800 Models with Küryakyn Drive
Shaft Cover (P/N 8285)
8688 Drive Hub Top Cover for VTX (ea) $93.99
A
D
D
C
A
C
B
B
frame trim for VTXTransform that rough
black frame forging into a
sleek, stylish, attention getter.
This two-piece kit attaches with
high-strength, high temp adhesive for quick & easy installation.
8260 Fits: All VTX1800 (set) $83.99
8305 Fits: All VTX1300 (set) $83.99
swingarm cover for VTX Create a right side show-chrome swingarm with this cover.
Complete the full chrome rear swinger with our Drive Shaft
Cover (P/N 8285).
Fits: All ‘03-’09 VTX1300 & ‘02-’08 VTX1800 Models
8287 Swingarm Cover for VTX (ea) $103.99
8285
8260
8287
74 8 7 7 . 3 7 0 . 3 6 0 4
C
B
A
B
shaft drive cover for V Star
U.S. Patent D549,621
Give the rear differential the effect of a chromed
housing at a fraction of the cost. Our Shaft Drive
Cover integrates nicely with the design of our
Phantom Covers for the V Star. Easy add-on with a
two-bolt installation.
Fits: ’99-’09 V Star 1100 & ’98-’10 V Star 650 Models
8286 Shaft Drive Cover for V Star (ea) $83.99
phantom covers for V StarWork wonders on the back
wheels of V Star 1100’s &
650’s alike & turn a hodge-
podge of fasteners, frame
tubes, axles, hubs into one
smooth-sculpted chrome cover.
Fits: ‘98-’10 V Star 650, ‘99-’09 V Star
1100 (‘06-’10 V Star 650 & 1100 right sides
require aftermarket exhaust that allows 3/4” clearance from exhaust
mount bracket & axle nut)
8203 Phantom Covers for V-Star 650 & V Star 1100 (pr) $79.99Note: When checking for appropriate clearance on ‘06-‘10 Models please remember swingarms move separate from your exhaust mounts. Compress & extend the suspension for proper clearance.
A boomerang frame trim for Road StarThese metal covers bolt directly over
your bland frame & include all the
hardware you’ll need for a seamless
installation. You’ll get the look of a custom
chromed frame for a fraction of the cost!
Fits: All ‘99-’10 Road Star 1600/1700 Models (except Warrior)
8662 Boomerang Frame Trim for Road Star (set)
$149.99
lower belt guard accent for Road StarSparkle up that drab stock belt guard while keeping the OEM
belt cover to protect the belt. Accents simply install over the
top for a huge difference.
Fits: All ‘99-’10 Road Star 1600/1700
Models (except Warrior)
8663 Lower Belt Guard Accents for Road Star (ea)
$93.99
C swingarm covers for Road StarWant the appearance of an expensive chrome swingarm without the
hassle? Add these covers to chrome your whole visible swingarm.
8262 Swingarm Cover for Road Star (set) Fits: All ’99-’10 Road Star (except Warrior) Note: Right side on ‘07-’10 Models requires aftermarket exhaust with 1” clearance from axle nut.
$169.99
Note: When checking for appropriate clearance, please remember swingarms move separate from your exhaust mounts. Compress & extend suspension for proper clearance.
8286
8203
75w w w . k u r y a k y n . c o m
swingarm axle adjuster cover for RaiderEffortlessly transform the end of your swingarm! This two-piece creation was not only designed to
conceal, but also gracefully highlight the trailing edge of your swingarm without being too overbearing.
The removable center allows access for belt adjustments when needed. Select the original or short
Swingarm Axle Adjuster Cover to suit your style & be amazed. (Sold individually)
Fits: All ‘08-‘10 Yamaha Raider Models (Fits both left & right side of swingarm - sold individually)
Note: Only the Short Axle Adjuster installs on right side with Vance & Hines Exhaust.
8941 Swingarm Axle Adjuster Cover (ea) $99.99
8942 Short Swingarm Axle Adjuster Cover (ea) $99.99
top belt guard for yamahaSimple elegance. This fully chromed
replacement guard with its turned-down end &
stylish side accents only enhance the original
lines of the rear end. Easy two bolt installation.
Fits: All ’08-‘10 Yamaha Raider Models & ‘06-’10
Roadliner/Stratoliner
8940 Top Belt Guard (ea) $79.99
8942
8941
boomerang frame cover
for yamahaA renowned Küryakyn parts de-
signer once said, “Chrome won’t get
you home, but you’ll look good when
you get there.” This new Raider Frame
Cover reinforces these sage words. This natural
transition covers the black frame rails with a flash
of chrome that really catches the eye & provides a
more flowing appearance. This is no doubt one of
the most aesthetically pleasing additions one can
make to this already beautiful motorcycle.
Fits: All ’08-‘10 Yamaha Raider Models & ‘06-’10
Roadliner/Stratoliner
8943 Boomerang Frame Cover (ea) $59.99
Fits Both
Sides of Your
Swingarm!
A
A
B
B
C
C
L o o k s G r e a t W i t h . . .
license plate bracket Get rid of that stock mount! Our uniquely styled
License Plate Bracket will have everyone asking you where you got it. See pg 76
P/N 9257
N E W f o r 2 0 1 0 . . .
attitude medallions Add attitude & style the easy way! Multiple theme
options so you can express yourself any way you want. See pg 69
P/N 3799
8 7 7 . 3 7 0 . 3 6 0 476
curved tip-back license plate frameAdd the Curved Tip-Back License Plate Frame
& smooth out the back of your fender. With 8˚
of angle & a curved frame, this chrome beauty
holds a 4” x 7” plate & bolts directly to your
stock OEM license plate mount.
Fits: Bolts directly to flat stock OEM license plate
mount
9198 Curved Tip-Back License Plate Frame (ea)
$69.99
P/N 1619
L o o k s G r e a t W i t h . . .
universal turn signals Minimize your turn signals with smooth,
fully chromed L.E.D.'s. Perfect fit with License Plate Bracket. See pg 38
sub-fender license plate bracket with L.E.D. Curved FrameMinimize your license plate & turn signal area with smooth
curved chrome to match the tail of your bike. The L.E.D. lighted
license plate frame allows stock, custom, Küryakyn Universal
Turn Signals (P/N 5032) or Silver Bullet Turn Signals to be installed.
Fits: All ‘08-‘10 Yamaha Raider Models (Holds a 4" x 7" Plate)
9257 License Plate Bracket with L.E.D. Curved Frame (kit)
$189.99
Note: Turn signal mounts allow reinstallation of stock turn signals or others that mount with a 5/16” bolt or stud.
curved laydown license plate mountThe rear fenders on today’s Cruisers are
very impressive. The license plate bracket
& reflectors are a different story. Our
streamlined License Plate Mount holds a 4"
x 7” plate & is truly the final touch needed.
Such a difference for so little money.
Fits: ’03-’09 VTX1300 Retro/S/T or ’02-’08
VTX1800 Retro/S/T Models
9171 Curved Laydown License Plate Mount (ea)
$69.99
license frame & back plate setOur chrome frame & back plate will
dress up your license plate when using the
stock bracket.
Fits: 4” x 7” Plates
9166 License Frame & Back Plate Set
$19.99
l.e.d. license plate illuminatorsLight up your license plate
whether it’s in the stock location or
custom mounted with these white L.E.D.
bolt lights. Simple select with or without rear-red L.E.D. single function
auxiliary lights & mount these little beauties up.
9199 L.E.D. License Plate Bolt Lights (pr) $19.99
9399 L.E.D. License Plate Bolt Lights with Red Accent Light (pr)
$31.99
Note: Not suggested for use with Küryakyn curved license plate frame, universal 1/4”-20 Mounting Stud & cut & splice wiring to motorcycle.
Side View
upgrade your
rear end!9399
9199
w w w . k u r y a k y n . c o m 77
1624
1625
license plate marker light/ turn signal mountMount auxiliary marker lights or turn
signals to your license plate with these
chrome brackets & support plate. The side
mount brackets have a 3/8” hole & will accept Küryakyn Silver
Bullets or L.E.D. Mini Bullets (pgs 37).
4247 License Plate Marker Light Mount (ea)
$39.99
Note: Will not install with Curved License Plate Frames or Swept/Lone Eagle License Plate Frames.
license plate helmet lock with mountLock your helmet to the back of your license plate with this little mount
& lock system.
4248 License Plate Helmet Lock (ea) $39.99Note: Will not install with Curved License Plate Frames or Swept/Lone Eagle License Plate Frames.
license plate hardware kitsChrome hardware & rubber
isolators dampen vibration between
your plate & frame. Available in three
styles to accommodate a variety of plate
brackets & frames.
Fits: Most slotted license plate brackets
& frames
1623 Button Head (kit) $7.99
1624 Acorn (kit) $8.99
1625 Countersunk (kit) $9.99
1623
Lit/UnLit9007
9007
curved side mount license plate holders In the past, if you wanted a cool, custom side-mount license plate you paid through
the nose. Our product brings the price down to reality without compromising style &
function. All frames include a license plate light so simply choose your plate then get
the correct Mounting Clamps. Sized to fit 4” x 7” plates only. License Holders
9023 Lighted Curved Horizontal Side Mount License Holder (ea) $119.99
9005 Lighted Curved Vertical Side Mount (ea) $114.99
9007 Lighted Curved Vertical Side Mount with Brake Light (ea) $155.99Note: Not intended for use with saddlebags. Please check local laws regarding side mount license plates before ordering. Note: Mount Clamps required for installation - Sold separately (below).
Mounts ClampsRequired for installation of Küryakyn Side Mount License Holders.
3174 Fits: All Honda VTX1300/1800 (ea) $31.99
3175 Fits: Yamaha Road Star without swingarm covers (except Warrior) & other motorcycles with 1-1/4” diameter swingarms (ea)
$31.99
3176 Fits: Yamaha V Star 1100/650 (ea) $31.99
3177 Fits: Yamaha Road Star (except Warrior) with Küryakyn Swingarm Covers (P/N 8262 & 8664) (ea)
$31.99
3182 Fits: All Kawasaki ‘07-’10 Vulcan 900 Models & All ‘04-’10 Vulcan 2000 Models (ea)
$31.99
Note: Mounts are motorcycle specific & designed to work with Küryakyn Side Mount License Plate Holders - Sold separately (above).
9005
9023
Taillight Can be
Installed on Top or Bottom!
l i c e n s e p l a t e s
to
ur
ing
Luggage | pg 78
Saddlebags | pg 84
Backrests & Racks | pg 86
Air Management | pg 87
pet palace Patent Pending
Does your small pet like to ride? If so, we have the safest, stylish, & most
convenient solution! Place your pet inside, strap it to the bike & you're
ready to take your favorite pet on the safari of a lifetime. Equipped with
more features than you can shake a stick at - A drink holder for you & a food dish
holder for your pet. Also a removable washable faux fur comfort liner, built in leash, two
large storage compartments & four mesh windows for viewing & ventilation.
Features
• Reflective piping for visability
• Highly water resistant fabric, no rain cover needed
• Mount on a luggage rack (with or without Tour-Pak) or passenger seat
• Top window opens allowing pet to pop it’s head out
• Internal frame & rigid bottom provides support for your pet
• Carrying handle for easy portability
• Bottom & top zipper open for easy cleaning
• Can be used as a kennel or pet house for travel
Dim: 18-1/2" Long x 15” Wide (with pockets) x 13” High
Cubic Inches: 2765 (Inside only)
4199 Pet Palace $189.99
Included Items:
Adjustable leash,
Carrying handle,
2 dishes, 4 metal stakes
for securing to the
ground, & adjustable
straps for mounting
8 7 7 . 3 7 0 . 3 6 0 4
Treat your
pet like the
king/queen that
they are!
Mesh Windows for Ventilation
78
For A Great Touring Combo, Combine Our
Ultra Tour Bag & Daily Tour Bag!4133
4148
Expands 4”
Mount on Backrest w/o Requiring a Luggage Rack
ultra tour bagYou need major storage? Here’s the answer. With its large center
compartment & 2 expandable large end compartments per side,
pack away! Perfectly sized, this bag provides back support for the
rider when mounted on the passenger seat. Lean back & enjoy.
Features:
• Fully zipped end doors & large hatch allows ample access to
main compartment from most sides
• Expandable side compartments for extra room when you need it
• Waterproof zippers with large, glove-friendly pulls
• Wide hook-&-loop belt securely attaches bag to any backrest
Dim: 16-1/2” High x 16” Wide x 15” Deep (Expands to 20” Wide)
Cubic Inches: 3,960 Expanded: 5,280
4148 Ultra Tour Bag $139.99
daily tour bagThe perfect day bag! The Daily
Tour Bag provides just enough
room for items needed on a
full day or overnight journey.
Features
• Large front hatch & end
hatch for loading & unloading
• Side pockets for additional storage
• Waterproof zippers
• Mounts on Tour-pak luggage rack, backrest with or without
luggage rack & solo rack
Dim: 12” Long x 10” High x 15” Wide
Cubic Inches: 1,800
4133 Daily Tour Bag $114.99 Note: Requires 10" of clearance from the top of the backrest down when mounting without a luggage rack.
mini grantour bagThe convenience of a stylish motorcycle bag & backpack in one. Simply
unzip the Mini GranTour Bag from its mounting pad & take this standard size
backpack with you by comfortably throwing it over your shoulder with the
included straps.
Features
• The center compartment expands to 1-1/2 times original size with pop up
semi-rigid support to hold its shape
• Large enough to hold most helmets
• Padded backpack straps with waist strap
• Can be mounted on a backrest with or without a luggage rack, a solo
rack or passenger seat
Dim: 14” Long x 14” Wide x 8” Deep (Expands to 12” Deep)
Cubic Inches: 1,568 Expanded: 2,352
4167 Mini GranTour Bag $159.99
Note: Requires 10" of clearance from the top of the backrest down when mounting without a luggage rack.
w w w . k u r y a k y n . c o m 79
All Four End Pockets Expand
2”
Removable
End Bags!
grantraveler bagMount the GranTraveler as a tour trunk or on top of your tour trunk for
extra storage room. The semi-rigid construction & adjustable universal
straps add ease when securing this bag to your motorcycle full or
empty. Additional internal & external compartments offer you multiple
options for packing as well. For the serious motorcycle traveler, it’s
hard to beat.
granthrow- over saddlebagsAdd convenience with these great saddlebags! These universal saddlebags are true throw-over
saddlebags. Simply adjust the mounting belt & throw them over or under the passenger seat with slant
forward or backward. Use the included universal straps to finish off the mounting & minutes later you’re
off on your next ride!
Features
• Throw-over convenience - mount or remove in seconds
• No saddlebag supports or mounting brackets required
• Internal & external accessory pockets
• Collapsible hidden drink holders
Dim (Each): 24” Tip to Tail Slanted Saddlebags, 12” High x 8-1/2” Wide (one end Expands to 11” Wide)
Cubic Inches: 2,448 per bag Expanded: 3,168 per bag
4171 GranThrow-Over Saddlebags $229.99Note: Applications with larger turn signals mounted to fender struts may limit the number of mounting options. Depending on the specific mounting, these bags may limit access to passenger footpegs.
• Fully adjustable to fit almost any motorcycle
• Expandable main compartment for extra space
• Heat-resistant material on bottom of bag
tombstone bag U.S. Patent 6,802,440
Here’s a bag that does double duty. Designed from the start to serve
as both a rigid frame backrest & a bag, the Tombstone Bag provides
solid lumbar support & a handy place to store essentials. Zippered
pockets, clips & pouches inside the bag keep everything organized &
easy to find. The Tombstone Bag is designed to fit on all motorcycles
with a passenger backrest.
Dim: 12” Long x 12” High x 9” Wide
Cubic Inches: Without side bags 1,296, with side bags 2,066
4143 Tombstone Bag
$159.99
Features
• Stylish motorcycle & airplane carry-on luggage all in one
• Pullout handle & wheels add ease to transport to &
from motorcycle
• Expandable top gives you the extra room when you need it
• Two removable end bags with straps or belt clips to
take items with you
Dim: 17” Long x 22” Wide x 11” Deep (Expands to 12-1/2” Deep)
Cubic Inches: 4,114 Expanded: 4,675
4149 GranTraveler Bag $199.99
Expandable 1-1/2”
Built-In Driver
Backrest!
8 7 7 . 3 7 0 . 3 6 0 480
multiple
mounting
options!
Mounts on
Luggage Racks Too!
eqiupped & ready
to tailgate!
Ultimate
Weekend
Companion!
Pull
Handle
Included Cooler Bag
grantour bagWith multiple mounting options
(sissy bar, luggage rack, or passenger
seat) this versatile bag is the ultimate
companion for weekend trips or short tours. A
semi-rigid internal framework serves two purposes.
It helps the main compartment hold its shape even when empty & it
provides adjustable lumbar support for the rider’s back. Large zipper
pulls are glove-friendly. Retractable locking device keeps bag right
where you want it.
Dim: 18” High x 14” Deep x 20” Wide
Cubic Inches: 3,744
4141 GranTour Bag $189.99
grantailgater bagTurn your big game, camping trip or event into the ultimate
experience with our GranTailgater Bag! Combining everything
but the kitchen sink, this bag will provide you with a tailgate &
cooler bag!
Features
• Pull out handle & wheels for easy transportation
• Top & front access to main compartment &
multiple external compartments
• Front of bag zips down with side supports to
create a tailgate table for fun on the road
• Removable cooler bag fits in bottom
compartment & holds 6-12oz cans with ice
Dim: 21” High x 17” Deep (Plus 1-1/2” for Handle) x
24” Wide
Cubic Inches: 6,402
4172 GranTailgater Bag $299.99
grand roll bagNo need to awkwardly bungee items to the front
of your bike anymore. Conveniently add storage
space with our stylish Grand Roll Bag. Designed
with universal mounting straps, this bag straps
conveniently to your handlebars or anywhere else you
want to strap it.
Features
• Easy mounting with no need for sissy bar or luggage rack
• Mesh end compartments gives you quick access
Dim: 8” Diameter x 16” Long
Cubic Inches: 1,024
4146 Grand Roll Bag $119.99
w w w . k u r y a k y n . c o m 81
Compressed
Expanded
full dresser bagOwn the most complete, versatile piece of motorcycle
specific luggage available! Its unbelievable features make
packing for a two-wheeled adventure more convenient &
practical than ever before.
Features
• No unpacking - gain access to items packed on top or
bottom with a unique wrap-around heavy-duty zipper
• Mesh inside pockets & heavy-duty quick-snap buckles
operate even with gloves on
• Mount to a variety of locations quickly & easily with a
variety of straps & D-rings
• Enough room for two leather jackets or a helmet in
expandable top - folds neatly away when not needed
• Rigid plastic molded insert provides
added stability to keep clothes neat & wrinkle
free & ensures bag will sit nicely & ride smoothly
while empty
• Two adjustable straps let you tie bedrolls, tents, or
jackets above the roomy top compartment
• Large 3-1/2” side compartments contain reinforced
piping & waterproof zippers
Dim: 12” Wide Main Compartment (Overall Width 18”),
10” Deep x 18” High (Top Compressed), or 25” High
(Top Expanded)
Cubic Inches: 3,240 Expanded: 4,500
4140 Full Dresser Bag $199.99
custom roll bagAdd the convenience of a universal mount roll
bag with expandable main compartment &
two end pockets for when you need that extra
storage room on the road.
Features
• Zippered ends & large hatch allow access to
main compartment from almost all sides
• Waterproof zippers
• Universal mounting straps provide endless
mounting options
• Can be mounted on a backrest without a
luggage rack
Dim: 8” Deep x 19” Long (Expands to 23”)
Cubic Inches: 1,216
Expanded: 1,472
4166 Custom Roll Bag $109.99 Note: Requires 10” of clearance from the top of the backrest down when mounting without a luggage rack.
küryakyn carries bags to suit all your traveling needs. if we don't have it,
you don't need it.ALL BAGS FEATURE:
• Universal Design to be Mounted in a Variety of Locations
• 1200 Denier Construction for Durability & Shape Retention
• Necessary Straps for Securing Bag to Bike
• Water resistant Shells &/or Rain Covers
• A Semi-Rigid Construction to Hold their Shape
• Most Bags Come with Shoulder Straps for Easy Portability
Rigid Plastic
Molded
Insert
new mounting
options!
Each End Expands
2”
clix l.e.d. podsAdd additional light where it is needed most with
the Clix LED Pods. Now there is no need to fumble
with flashlights or try to park under street lights
to find your belongings. Lights run on 3 AAA
batteries (included) & run up to 100 hours. Great for
saddlebags & tour boxes!
1626 Clix L.E.D. Pods (ea) $8.99
8 7 7 . 3 7 0 . 3 6 0 482
new
Each End Expands
1.5”
windshield pouch Patent Pending
Introducing the most useful Windshield Pouch on the market today.
Features three separate compartments, a large main compartment that
is both waterproof & lockable, a unique reversible quick detach pouch
that mounts to the outside as a map pouch or multi-use pocket &
can be stored inside the main compartment. This pouch is just
the right size to hold all your essentials & is made of durable
1200 Denier construction that is thermo-formed to hold its
shape when empty.
Fits: Küryakyn Quick Release Windshields & Memphis Shades
Dim: 20-1/2” Long x 6-3/4” High x 6” Deep
Cubic Inches: 290 main compartment, 370 overall
with both pockets
4137 Windshield Pouch (ea) $119.99Note: Please check for clearance with cables to ensure that bag does not interfere with steering. Windshield pouch mounts to windshield cross bar. Adjustable to extend minimum of 1” below cross bar.
reversible
quick detach
pouch!
multiple
mounting
options!
new
tour trunk roll bagDesigned to rest on the luggage rack or sissy bar rack, the Tour
Trunk Roll Bag features a large clamshell-style lid that opens wide
for easy access to packed items. A hook-&-loop closure secures
the front flap. A retractable locking device lets you lock the bag to
the bike. A cargo net on the inside of the lid keeps weather-proof
items handy.
Dim: 10” Tall x 12” Deep x 19” Wide
Cubic Inches: 2,280
4142 Tour Trunk Roll Bag $169.99
classic tour bagThe Classic Tour Bag is not your traditional roll bag.
Place it on your luggage rack & securely fasten it to
your sissy bar with its wide hook-&-loop strap. Place it
on your passenger seat & it’s perfectly sized to provide
lumbar support for the rider. The Classic Tour Bag
provides ample protection for your items.
Features
• Zippered ends & large hatch allow access to
main compartment from almost all sides
• Expandable side compartments provide extra
room when you need it
• Waterproof zippers with large glove-friendly pulls
• Convenient shoulder strap makes carrying a breeze
Dim: 12” Long x 11” High x 21” Wide (Expands to 24”)
Cubic Inches: 2,772 Expanded: 3,168
4144 Classic Tour Bag $139.99
cranker tank bag
Patent Pending
Infuse your ride with style, music &
storage! Features an integrated amplifier,
speaker & MP3 capability.
Features• Speaker specially tuned for optimum sound
at highway speeds
• Powered from your bike or 4AA batteries
• 3-High powered magnets hold bag securely in place
• Optional mounting straps for plastic tanks & added versatility
Dim: 13” Long x 8” Wide x 4” Deep
4161 Cranker Tank Bag $169.99
w w w . k u r y a k y n . c o m
wide
clamshell
lid for easy
access
great
for sport
bikes!
83
turn signal relocator kitRelocate your stock signals to the license plate area to
accomodate Edge Saddlebags. With several mounting points for
lights, it accepts most metric OEM rear turn signals as well as our
mini, large & small silver bullets & P/N 5032 Turn Signals.
3155 Turn Signal Relocator Kit (kit) $39.99
Note: Will not work with Küryakyn Curved License Plate Frames.
saddlebag cup holderSlide onto the inside edge of
saddlebag, insert beverage &
ride away.
5388 Cup Holder (ea)
$19.99
1 Pick Out the Bag That Best Fits Your Style
2 Check Chart (Right) to Find the Correct Bracket Your Bike Requires
quick release detachable saddlebag system
how to order:
model 102Fully reinforced bag featuring removable shoulder
straps, quick release buckles & internal pockets.
Dim: 20” Long x 7-1/2” Wide x 11-1/2” High
5380 Plain (pr) $359.99
5381 Studded (pr) $379.99
model 105Fully reinforced
bag with conchos,
removable shoulder
straps, quick release buckles
& internal pockets.
Dim: 19-1/4” Long x 7-1/4” Wide x 12-3/4” High
5382 Plain (pr) $339.99
5383 Studded (pr) $349.99
model 108Fully reinforced bag featuring lockable lids, removable
shoulder straps, quick release buckles & removable
internal organizer.
Dim: 20” Long x 7-3/4” Wide x 11-1/2” High
5386 Plain (pr) $499.99
5387 Studded (pr) $529.99
model 104Fully reinforced bag featuring lid that opens back
to front, quick release buckles & internal pockets.
Dim: 23” Long x 8” Wide x 13-3/4” High
5384 Plain (pr) $399.99
5385 Studded (pr) $429.99
Not your average saddlebags. Completely reinforced at all critical points, they scream leather, yet function
like hardbags. They’ll hold their shape & will not sag. Created with strength & ruggedness in mind for unsurpassed
longevity. Universal - will work on any bike with almost any hardmount saddlebag system.1 edge
saddlebags
Rendering Shown
8 7 7 . 3 7 0 . 3 6 0 484
new new
new new
new
new
Model 102
Model 105
Model 104
Model 108
eez carry leather handleConveniently carry both of your saddlebags
when you want to remove them from your ride.
5389 EEZ Carry Leather Handle (ea)
$36.99
Completely adjustable in every direction, allowing you to place your bags exactly
where you want them. They’re also lockable, which allows you to safely secure your bags
to your bike. Constructed from solid 10-gauge steel, pretreated & black powder coated.
Brackets, keepers & all necessary polished stainless steel hardware is included.
2 quick release brackets
edge brackets +
edge bags =
the complete package
No Other
Brand Fits as
Many Models!
A Perfect Bag with A Perfect Mounting System
P/N Honda Applications For Use With Installation Notes Price
5324 All VTX C & F Models No Backrest Front 2 Bolts $154.99
5325 All VTX C & F Models Hondaline Deluxe Backrest Front 2 Bolts $154.99
5326 All VTX C & F Models Hondaline Sport Backrest Front 2 Bolts $154.99
5327 All VTX C & F Models Hondaline Traditional Backrest Front 2 Bolts $154.99
5328 All VTX C & F Models Aftermarket Hardmount Backrest Rear 2 Bolts $154.99
5329 All VTX C & F Models Paladin Backrest Rear 2 Bolts $154.99
5330 All VTX R, S & N Models No Backrest Front 2 Bolts $154.99
5331 All VTX R, S & N Models Hondaline Deluxe Backrest Rear 2 Bolts $154.99
5332 All VTX R, S & N Models Hondaline Deluxe Backrest Front 2 Bolts $154.99
5333 All VTX R, S & N Models Hondaline Traditional Backrest Rear 2 Bolts $154.99
5334 All VTX R, S & N Models Hondaline Traditional Backrest Front 2 Bolts $154.99
5335 All VTX R, S & N Models Hondaline Sport Backrest Front 2 Bolts $154.99
5336 All VTX R, S & N Models Hondaline NEO-Retro Backrest Front 2 Bolts $154.99
5337 All VTX N Models Hondaline NEO Backrest Front 2 Bolts $154.99
5338 All VTX R, S & N Models Paladin Backrest Rear 2 Bolts $154.99
5339 All VTX R, S & N Models Aftermarket Hardmount Backrest Rear 2 Bolts $154.99
5340 All Shadow VT1100 Ace, Aero, Sabre, Spirit
No Backrest or Hardmount Backrest Standard 2 Bolt $154.99
P/N Kawasaki Applications For Use With Installation Notes Price
5360 All Vulcan 1500/1600 No Backrest or Hardmount Backrest Standard 2 Bolt $154.99
5361 All Vulcan 1500/1600 No Backrest Standard 2 Bolt $154.99
5362 All 1500 Classic Hardmount Backrest Standard 2 Bolt $154.99
5363 All 1600 Classic No Backrest Standard 2 Bolt $154.99
5364 All 1600 Classic Hardmount Backrest Standard 2 Bolt $154.99
5365 All 900 Custom/Classic No Backrest Standard 2 Bolt $154.99
5366 All 900 Custom/Classic Hardmount Backrest Standard 2 Bolt $154.99
P/N Yamaha Applications For Use With Installation Notes Price
5343 All V Star 1100 Custom No Backrest N/A $154.99
5344 All V Star 1100 Custom Hardmount Backrest N/A $154.99
5345 All V Star 1100 Custom Paladin Backrest N/A $154.99
5346 All V Star 1100 Custom /Silverado No Backrest N/A $154.99
5347 All V Star 1100 Classic/Silverado Hardmount Backrest N/A $154.99
5348 All V Star 1100 Classic/Silverado Paladin Backrest N/A $154.99
5349 All V Star 1300 No Backrest N/A $154.99
5350 All V Star 1300 Aftermarket Hardmount Backrest N/A $154.99
5351 All V Star 1300 Yamaha Hardmount Backrest N/A $154.99
5352 All Roadstar/ Royal Star No Backrest N/A $154.99
5353 All Roadstar/ Royal Star Hardmount Backrest N/A $154.99
5354 All Roadstar Paladin Backrest N/A $154.99
5355 All Raider No Backrest N/A $154.99
5356 All Raider Hardmount Backrest N/A $154.99
5357 All Roadliner/Stratoliner No Backrest N/A $154.99
5358 All Roadliner/Stratoliner
Aftermarket Hardmount Backrest N/A $154.99
5359 All Roadliner/Stratoliner
Yamaha Hardmount Backrest N/A $154.99
P/N Suzuki Applications For Use With Installation Notes Price
5341 All Volusia 800/C50/M50 No Backrest N/A $154.99
5342 All Volusia 800/C50/M51 Hardmount Backrest N/A $154.99
5367‘98-’09 Intruder VL 1500 & ‘03-’09 Boulevard C90
No Backrest N/A $154.99
5368 ‘06-’09 Boulevard M109R No Backrest N/A $154.99
Note: For use with flat surface mounting saddlebags only (most aftermarket hardmount saddlebags where the rear of the saddlebag is flat). For molded aftermarket or OEM saddlebags additional hardware is needed.
Note: Mounting Brackets for Yamaha & VTX applications will not install with Küryakyn’s Backrests (P/N 1556, 1536-38, or 1631-33).
Note: Mounting Brackets are not suggested for use with GranThrow-Over Saddlebags (P/N 4171).
w w w . k u r y a k y n . c o m 85
new
new
Fold-Down
Convenience!
1631
Shown with Iron Cross L.E.D. Light (P/N 1534)
transformertm backrest with Fold-Down Luggage Rack Patent Pending
Even the Moonshiners would be jealous of this backrest with hidden
fold-down luggage rack. The sweeping oval bars with matching
contoured pad flows with the lines of your bike. Literally fold down the
inconspicuous luggage rack right out of the backrest when needed & hide it
away securely with the integrated thumb-nut when you don’t. Your passenger is happy, you can always
bring your things, & your bike looks awesome. Mounts directly to the required Küryakyn motorcycle
specific Side Straps for Transformer Backrest & you have everything you need. This is a must have.
Fits: Küryakyn Motorcycle Specific Side Plates for Transformer Backrest
1606 Transformer Backrest with Fold-Down Luggage Rack (ea)
$199.99
Transformertm Backrest Side Plates:
1631 Fits: All ’99-’10 Road Star Models (except Warrior) (pr)
$99.99
1632 Fits: All ’99-’09 V Star 1100 Models (pr) $99.99
1633 Fits: All ’02-’08 VTX1800R/S/C/F Models & all ’03-’09 VTX1300R/S/C Models (pr)
$119.99
Note: Only intended for installation of Küryakyn Transformer Backrest with Fold Down Luggage Rack (P/N 1606) that requires 5/16” mounting holes. Not intended for use on models with OEM saddlebags.
raptor barWickedly designed, this Raptor Bar is approximately 12” tall & fits
most applications that accept a standard H-D style backrest with
8-3/4” wide mounting position. The mounting holes are 1-1/4”
center to center with 1/4” -20 tapped threads. The stylish shaped
pad follows the contour of the bar & adds both comfort & that
finishing touch.
1532 Raptor Bar (ea) $179.99Note: Required mounting side straps shown right (P/N 1536, 1537, 1538)
premier luggage rack Not a run-of-the-mill flat rack
for your motorcycle! This fresh
design is streamlined & three-
dimensional. Black rubber inserts
contrast the bright chrome finish
& also provide a slip resistant
surface. With front to back
adjustment you can position this rack
exactly where you want. Problem is,
with a rack this nice, you won’t want to
cover it up with luggage!
Fits: Existing backrest (required), all Küryakyn
backrests (except Transformer Backrest P/N 1606) & universal
applications (installs on the mounting bolt side of the side strap
with the following dimensions):
• Sissy bar requires mounting bolts to be 1/4-20 with 1-3/16” to 1-5/16” center to center spacing • Mounting inside existing side straps with width from (5-5/8” to 6”) or (7-1/4” to 7-1/2”) wide • Mounting outside existing side straps with width from (5-3/8” to 5-5/8”) or (7” to 7-1/4”) wide
7156 Premier Luggage Rack (ea) $169.99
Mounting Straps Note: Not intended for use with Models with OEM saddlebags.
1536 Fits: All ‘99-’10 Road Star (except Warrior) (pr)
$119.99
1537 Fits: All ‘99-’09 V Star 1100 (pr) $119.99
1538 Fits: All ‘02-’08 VTX1800R/S/C & F, All ‘03-’09 VTX1300R/S/C (pr)
$135.99
Note: Will accept Küryakyn or other backrests with dimensions listed above. Not intended
to fit with additional accessories in front two fender strut bolts
for Honda or two mounting holes in fender strut accents for Yamaha.
8 7 7 . 3 7 0 . 3 6 0 4
b a c k r e s t s & r a c k s
86
w w w . k u r y a k y n . c o m
a i r m a n a g e m e n t
Rider Shown is 6’ Tall with Tall
Windshield
windshields Tall
2622 Light Smoke (ea) $299.99
2623 Clear (ea) $299.99
Mid
2624 Light Smoke (ea) $299.99
2625 Clear (ea) $299.99
mounting kit2603 Fits: All VTX1300 & 1800 Models $94.99
23-¾”18-½”
21-½”
Mid
Tall
26-¾”
23”
6 Degrees of Angle Adjustment!
Eccentric lower mounting point can be positioned forward or back during
installation to tailor windshield angle
quick release windshields
driver backrests Add the comfort you need to fully enjoy those motorcycle rides with this sleek
Driver Backrest. With full adjustability, position your backrest into the perfect spot
then lean back & enjoy the ride. Designed to allow comfortable room for passengers,
it tips forward out of the way for passenger mounting & includes a storage pouch
for added convenience. Once you relax on the road with this backrest, you’ll wonder
how you ever made it without one.
1554 Fits: ‘99-’10 Road Star 1600/1700 (except Warrior) $199.99
1555 Fits: VTX1300/1800 Retro/S $199.99
Convenient
Storage Pouch
Included!
1555
switchable driver/passenger backrest for VTXA Driver Backrest
& a Passenger
Backrest in one
cool system! Simply
remove the three
thumbscrews & move
it to the desired position in
seconds. Three mounting positions
& additional adjustability found in the
backrest help you get the support you’re looking for. The
backrest bars function as handles for the passenger & the
convenient pouch adds storage. If you ride solo some days but
with a passenger on others-The Switchable Driver/Passenger
Backrest is for you.
1556 Switchable Backrest (ea) Fits: ‘02-’08 VTX1800R/S/C/F & ‘03-’09 VTX1300R/S/C
$299.99
Note: Not intended to fit with additional accessories mounted at front two fender strut bolts.
1554
2603
• Premium .125” Optical Grade, Hard-Coated Polycarbonate
• All windshields include Zombie & Grooved interchangeable emblems
• Unsurpassed style - Unlike flat, plain-looking outer cross & vertical hardware, our stainless steel outer hardware is beautifully stamped & chrome-plated for a rich, classy appearance
• Three heights; Low, Mid, Tall – Choose the look & level of wind protection that’s right for you
87
new
88 8 7 7 . 3 7 0 . 3 6 0 4
SPORTECHFAIRINGPLUS
SPORTECHFAIRINGPLUSSPORTECHF DETACHABLE FAIRINGPLUS
DETACHABLE FAIRING
for metric cruisersTransform your cruiser into the ultimate bagger with this new detachable fairing from
Sportech. Thermo-formed from the same high-tech materials used on factory fairings
& automotive body panels. This fairing provides superior fit-&-finish, fade & impact-
resistance when compared to other aftermarket fiberglass or acrylic fairings. The outer
shell is finished in vivid black automotive paint with clear coat while the stylish inner shell
features a black textured surface & includes a 13.5”W x 3”T x 3”D. storage compartment to
keep those small essential items handy. Now you can add superior wind-protection & that
cool bagger styling for the same cost of most factory windshield kits. Fully customize your
fairing with Küryakyn windshield trims, windscreens, & most other accessories compat-
ible with the standard H-D 3-hole windshield pattern. With a simple, 4 fastener mounting
system, this beauty comes fully assembled for a quick, easy & secure installation.
Features• Factory quality & construction at an affordable price
• Thermo-formed inner fairing with integrated storage
• Automotive quality, durable vivid black painted outer shell with clear coat
• Leave it black or custom paint it - Minimal surface prep required
• Includes sporty 3” black opaque windshield
• Light-weight will not adversely affect handling characteristics
• Simple, 4 fastener installation & removal
Sportech detachable fairing plus
1394 Sportech Detachable Fairing Plus (ea) Note: Requires Motorcycle Specific Mount Kit (Right-Sold Separately). Requires removal of all pre-existing windshields & windshield mounting hardware for proper installation.
$599.99
=fairing-specific accessories coming soon!
Mounting Kits for Fairing
1395 For Roadliner & Stratoliner - Black (kit) Fits: All ’06-’10 Yamaha Roadliner & Stratoliner Models - Only for mounting Sportech Detachable Fairing-Plus
$69.99
1346 For VTX - Black (kit) Fits: All ‘02-’08 VTX1800 & ’03-’09 VTX1300 Models Note: Works with stock turn signals. Does not work with Küryakyn Driving Lights or Turn Signals.
$69.99
1345 For Road Star - Black (kit) Fits: All ‘99-’10 Yamaha Road Star Models for mounting Sportech Fairing or Küryakyn AirMaster Fairing Note: Works with Stock Turn Signal Bar, Round OEM Driving Light Bar, & Küryakyn Driving Lights Bars.
$69.99
AUDIO KIT Sportech Detachable Fairing Accessory Audio Kit
Seamlessly integrate a powerful audio system right into
your fairing! Housings with 5-1/4” speakers, amplifier &
standard 3.5mm input connect to your iPod, MP3 player, cell
phone, or other personal music device. (Sold Separately)
Will not
crack,
shat ter or
fade like
fiberglass
or acrylic
fairings!
coming
soon!
WINDSHIELDS - P/N’s 1355-59 & 1360-62
DRAGON WINGS - P/N 1117
WINDSHIELD MOUNTED MIRRORS- P/N's 1452-53
WINDSHIELD TRIM - P/N’s 1198-99
great products to enhance your fairing
features • Küryakyn Stereo
- CD & AM/FM - 30 presets (18 FM, 12 AM)
- Front SD card slot, USB port, & 3.5mm auxiliary
input jack
- Direct control of most iPods - includes power/
interface cable routed into Glove Compartment for
safe, secure transport of your iPod
- One pair of RCA pre-outs (rear)
- RCA auxiliary input (rear)
- 5” x 7” Speakers specifically designed & tuned
for use on a motorcycle by Hogtunes, Inc -
These are not off-the-shelf car audio speakers!
• Cigarette lighter/12V power point (left side of
inner fairing)
deluxe fairing with audio system Küryakyn has teamed up with some of the best names in the business to bring you more! Our fairing has not just
caught up with, but is ahead of its time. While not losing touch with traditional styling, our fairing adds subtle &
classy styling improvements to set your bike apart from the crowd. The impressive list of features make this the
best fairing on the market!
• Glove Compartment featuring:
- Sealed, lockable storage with room for several CDs
- Removable Rubber mat keeps items from shifting
- Built-in cigarette lighter/12v power point
- Door marked for installation of GPS mount cradles
(4-hole AMPS pattern)
• 4” Dark smoke windshield (interchangeable with
any ’96-’10 Electra Glide windshield)
• Chrome mounting brackets
• Paint color-matched to H-D Vivid Black on outer fairing -
Choose to leave it black or have it custom painted to
match your bike
• Lightly textured black inner fairing resists finger prints
& other marks
Note: Go to Küryakyn.com for complete list of compatible devices.
deluxe fairing
1340 AirMaster Universal Deluxe Fairing with Audio System Motorcycle Mount Kit Required (Below)
$1,999.99
Note: All existing windshields and windshield mounting hardware must be removed for proper installation.
Mounting Kits for Fairing
1344 For VTX - Chrome (kit) Fits: All VTX1300 Models & VTX1800 Models Note: Does not work with Küryakyn Driving Lights P/N 4001, 5001, or 5009.
$129.99
1345 For Road Star - Black (kit) Fits: All ‘99-’10 Yamaha Road Star Models for mounting SporTech Fairing or Küryakyn AirMaster Fairing Note: Works with Stock Turn Signal Bar, Round OEM Driving Light Bar, & Küryakyn Driving Lights Bars.
$69.99
Rockin’ Stereo with Multiple
Audio Inputs
1117
1452
1361
1198
w w w . k u r y a k y n . c o m
Sealed, Lockable Storage with 12V Power, iPod, & 3.5mm Cables
89
90 8 7 7 . 3 7 0 . 3 6 0 4
pe
rfo
rm
ance
Air Cleaner Accessories | pg 90
Air Cleaners | pg 91
interchangeable medallions
Check out our Themed Medallions
Online to Transform your Hi-Five Mach 2!
pro-r pseudo hypercharger for Yamaha
Amaze everyone with the extreme performance
look of this pseudo Pro-R. Doubling as an electrical
housing, the visual horsepower added is insane.
Fits: All ’06-’10 Roadliner & Stratoliner Models &
’08-’10 Raider Models
9468 Pseudo Pro-R (ea) $199.99
inf initytm streamliner U.S. Patent 7,029,152
The smooth, mirror finished outer panels
become a vortex of lights when you flip the switch.
8415 Fits: Standard Hypercharger Only - Includes switch & all wiring (ea)
$199.99
wild things® fuel injection controllerBy Dobeck Performance
Wild Things has teamed with Dobeck Performance to
bring you an easy & affordable way to adjust your fuel
injection system for accommodating modifications to your
exhaust, air cleaner, or engine components. This load based
system reads throttle position, R.P.M & accounts for load on the engine.
Allows you to tune similar to jetting a carburetor & includes Scotchlock connectors for
splicing into your stock wiring harness.
Fits: Universal: Any V-Twin metric cruiser with fuel injection
9218 Wild Things Fuel Injection Controller $199.99
Seven Color L.E.D. Technology Operates in Three Stunning Modes:
• Single color steady illumination
• Single color flashing illumination
with rheostat adjusted variable rate
• Paint Mode: All lights in unison
continuously cycle through all seven
colors (red, lime, ice blue, sky blue,
dark blue, purple, green) with an
adjustable variable rate
Typical Applications with Fuel Injection:
Honda: ‘02-’08 VTX1800 (All Models)
Kawasaki: ‘99-’10 Vulcan
1500/1600/2000
Suzuki: ‘04-’09 1600 Marauder/
Boulevard M95, Boulevard C50/M50/
C90, M90, M109R
Victory: ‘98-’10 Victory (All Models)
Yamaha: ‘02-’09 Road Star Warrior,
‘08-’10 Road Star, ‘07-’10 V Star 1300,
‘09-‘10 V Star 950 & ‘06-’10 Roadliner/
Stratoliner/Raider
7-Colors in One!
the scoop air box cover for Vulcan 900Gain extreme visual speed & horsepower with this direct
replacement cover! The long speed lines combined with
the illusion of a ram air scoop will certainly intensify any
ride. Installation is a snap.
Fits: All ’06-’10 Vulcan 900 Models
9961 The Scoop Air Box Cover (ea) $79.99
91w w w . k u r y a k y n . c o m
a i r c l e a n e r s
Mach 2TM Patent Pending
VelociraptorTM Patent Pending
Pro-R U.S. Patent 5,307,771
HyperchargerTM U.S. Patent 5,307,771
Pro-Series U.S. Patent 5,307,771
CorsairTM Skull Twin VelocityTM Plus
Honda
‘03-’09 VTX1300 9478 -$269.99 9442 -$179.99 9460 -$299.99 9431 -$289.99 9407 -$299.99 9866 -$339.99 9952 -$299.99 N/A
‘02-’08 VTX1800 947 9-$269.99 9443 -$169.99 9461 -$299.99 N/A 9411 -$299.99 9863 -$299.99 9953 -$289.99 N/A
‘95-’07 1100 Shadow (Cosmetic Upgrade Only) N/A N/A N/A 9430 -$199.99 N/A N/A N/A N/A
‘04-’09 Aero 750, ‘07-’09 Spirit 750 C2 with Shaft Drive N/A N/A N/A 9432 -$299.99 N/A N/A 9954 -$309.99 N/A
Kawasaki
‘04-’10 Vulcan 2000 N/A N/A 9465 -$319.99 N/A N/A 9867 -$349.99 N/A N/A
‘95-’04 Vulcan 1500 (Single Carb Only) N/A N/A N/A 9400 -$289.99 9404 -$299.99 N/A N/A N/A
Fuel Injected Vulcan 1500/1600 Including Mean Streak N/A N/A N/A 9405 -$299.99 9408-$289.99 N/A N/A N/A
‘95-’06 Vulcan 800 N/A N/A N/A 9410 -$299.99 N/A N/A N/A N/A
Yamaha
‘08-’10 Road Star 1700 - Fuel Injected Only (except Warrior) N/A N/A 9466 -$319.99 9425 -$309.99 9424 -$319.99 N/A N/A N/A
‘99-’10 Road Star 1600/1700 (except Warrior) N/A N/A 9464 -$349.99 9420 -$349.99 9421 -$349.99 N/A N/A 9852 -$319.99
‘99-’09 V Star 1100 N/A N/A 9463 -$299.99 9423 -$289.99 9409 -$299.99 N/A 9956 -$299.99 N/A
‘98-’10 V Star 650 N/A N/A N/A 9422 -$299.99 N/A N/A 9955 -$319.99 9853 -$289.99
Suzuki
‘04-’06 Marauder 1600/Boulevard M95 N/A N/A N/A 9405 -$299.99 9408 -$299.99 N/A N/A N/A
corsairtm air cleaner
hi-five mach 2tm
air cleaner
Rendering Shown
Rendering Shown
velociraptortm air cleaner
hyperchargertm
pro-r hyperchargertm
twin velocitytm
plus
pro-series hyperchargertm
skull air cleaner
g e n e r a l a c c e s s o r i e s
stinger trap door for Hypercharger
If you have a need for more speed & want top performance from
your bike then this is for you. Designed specifically to maximize
airflow into the carburetor or throttle body, the Stinger’s two large
raised scoops channel air through a high-flow foam filter element.
Sit down, shut-up, & hang on!
Fits: Standard Hypercharger only
8498 Stinger Trap Door with Filter (ea) $51.99
chrome universal helmet lockDon’t let anyone walk off with your helmet! Lock
it right to your bike with our Chrome Universal
Helmet Lock. Works on engine guards, frame
tubes, or any other 7/8” to 1-1/2” tube.
4232 Chrome Universal Helmet Lock for 1-1/4” to 1-1/2” Tube (ea)
$24.99
4220 Chrome Universal Helmet Lock for 7/8” to 1-1/4” Tube (ea)
$24.99
Note: Installs with standard tools. Works best mounted on a 2-1/4” long section of straight tube.
white diamond metals polishOxidization & discoloration is easily & quickly removed from aluminum, stainless,
chrome, & brass while returning the surface to a brilliant shine. Also effective
on minor gold & blue discoloration on chrome & stainless exhaust pipes. Besides
containing an ultra fine polishing rouge, White Diamond contains a wax agent that
will keep surfaces gleaming far longer than competing brands.
35 White Diamond Metals Polish, 12 oz (ea) $15.99
liquid horsepower fuel treatmentLHP (Liquid Horsepower) is the most advanced & effective gasoline additive for use in
both stock & high performance engines. The performance, protection, & fuel mileage it
delivers will keep you coming back for more.
Features: • Maximum street legal octane booster potency approved by EPA
• O2 sensor safe
• Upper cylinder lubricant protects & extends life of valves, valve guides, pistons, rings, & cylinders
• Prevents rust & corrosion
• Stabilizes fuel to prevent gelling during storage
• Complies with all manufacturer warranty requirements
954 LHP 1oz Bottles (48 Count with 2 Displays) $143.99
955 LHP 1oz Bottle (Treats 5 gal) (ea) $2.99
956 LHP 6oz Bottle (Treats 30 gal) (ea) $10.99
küryakyn® stainless steel travel mug Keep cold drinks cold & hot ones
hot when you’re on the road.
Stainless Steel inside & out with
a closable drinking hole to avoid
spills. (Replacement for Küryakyn
drink holders).
1469 Stainless Steel Travel Mug (ea)
$17.99
küryakyn® can cooler
8985 Can Cooler (pr) $5.99
8 7 7 . 3 7 0 . 3 6 0 492
the
sh
op
General Accessories | pg 92
920
Shown Mounted with P-Clamp
condor® wheel chocksCondor’s patented locking
mechanism effortlessly
& securely supports the
motorcycle in an upright
position. This makes tying
down a motorcycle a simple
& easy task for one person.
Allows you to secure the bike
with only two straps.
condor® sc2000 Trailer Only Wheel Chock
• Accommodates front
or rear wheel sizes from
14”-22”/80mm-220mm wide
• Intended as trailer chock
only. Includes mounting adapter
kit for quick attachment & detachment
to any transportation platform (trailer, pick-up bed, etc.)
• Folds down for easy storage & weighs only 26 lbs
• Upright size: 9” W, 25” L, & 15” H (folds to 7” H
922 Condor SC2000 Trailer Only Wheel Chock with Adapter Kit (ea)
$184.99
923 Adapter Kit for SC2000 (ea) $24.99
condor® pit-stop/ trailer stop wheel chock
• Accommodates front or rear wheel sizes from 15”-22”/80mm-
220mm wide
• Can be used as a work stand or trailer chock
• With a trailer adapter kit (sold separately) the unit quickly & easily
attaches to trailers or pick-up beds
• Folds down for easy storage & weighs only 21 lbs
• Upright size: 29” W, 30” L, & 15” H (folds to 6” high)
920 Condor Pit-Stop/Trailer Stop Wheel Chock (ea) $249.99
921 Adapter Kit for Condor Pit-Stop/ Trailer Stop (ea) $21.99
v-120 & v-120c hornet® The Hornet has proven to be the only device to effectively deter
deer accidents. The Hornet includes universal mounting brackets,
basic hardware & a switch. A motorcycle specific wiring kit is
available; while not required, it will make the installation much
neater. Our P-Clamps work great to mount the Hornet to frames or
engine guards.
Universal fit on 12-volt motorcycles
4042 V-120 Hornet Deer Alert, Black (ea) $79.99
4043 V-120C Hornet Deer Alert, Chrome (ea) $84.99
4044 Motorcycle Wiring Kit for V-120/V-120C $17.99
w w w . k u r y a k y n . c o m
WARNING!Deer are responsible for
more death & injury than any
other animal in the U.S.A.
93
94 8 7 7 . 3 7 0 . 3 6 0 4
can’t find what you’re looking for?
We’ve got thousands of products & as we’re sure you know, not everyone
thinks alike. So be generic when you’re searching our index - we’ve tried to
generalize our Product Descriptions in the hopes to reach the masses.
i n d e x
Product Description Page #
Accent Lights 41Accessory Mounts & Pouches 14, 49-50Accessory Switches 13Adapter Plug for Front Turn Signal Accents 6
Adapters Floorboards 58Footpegs 27, 31, 54, 64Footpegs Master Chart 58Mirrors 30, 52
Adjustable Cruise Peg Mounts 62Air Cleaners 90-91Airfoil, Rear 15Alternator, GL1500 25Armrest, GL1800 17Audio Products 13,48Axle Caps/Covers, Can-Am 27Backrest, GL1800 17Backrests, Honda & Yamaha 86Bags & Bag Mount Kit 78-83Bags & Bag Mount Kit, GL1800 24Battery Box Cover, GL1800 10Battery Gauge 13,49Belt Guard 74-75Bike Covers 25Bike Map, GL1800 4Bike Maps, Metric Cruisers 1-3Bike Map, Sport Bikes 26-27Boomerang Frame Covers, GL1800 10Boomerang Frame Covers, Sport Bike 33Boomerang Frame Trim, Yamaha 75
Product Description Page #
Brake Arm with Pedal 19Brake Light Controller 40Brake Pedal Pads/Covers
Can-Am Spyder 27GL1800 19Metric Cruisers 60-61
Brake Reservoir Cover, Front 33
Bulbs, Metric Cruisers & Sport Bikes 42
Caliper Covers, Metric Cruisers 68-69Can-Am Spyder 26-27Can Cooler 92Cell Phone Holder 14, 49-50Choke Knob Cover 70Clamps for Lights 38Clamps for Highway Pegs 65Clutch Perch Covers 46Clutch Top Cover, Sport Bike 33Cockpit Accessories, GL1800 11Comfort Risers, GL1800 13Condor Wheel Chocks 93Control Covers 47Cowl Chrome Cover, GL1800 8Cruise Pegs & Mounts, GL1800 19-20Cruise Pegs & Mounts, Metric Cruisers 62-64, 66Cruise Pegs, Passenger 66Cylinder Base Covers 71Deep Dish Bezels with Lenses 40Deer Alerts 93Diode Kit 41Dragon Wings Wind Directors, GL1800 15
Product Description Page #
Drink Holder 14,16,48-49,89Drive Shaft Covers, VTX 73-74Driver Backrests, GL1800 17Driver Backrests, Metric Cruisers 87Driver Boards 56,66Driver Floorboards, GL1800 18Driving Lights, GL1800 8Driving Lights, Metric Cruisers 35-36Electrical Power Point 13,48Emblems, Zombie 34,70End Caps for ISO-Grips 29,44Engine Covers, Metric Cruisers 70-71Engine Guards 65Ergo II Cruise Mounts 20Exhaust Extensions, GL1800 23Eyebrows for GL1800, Chrome 7Fairing, AirMaster for Metric Cruisers 89
AirMaster Fairing Accessories 89Fairing Chrome Accents, GL1800 7Fairing, SporTech Detachable 88Fairing Exit Vent Accent, Sport Bike 32Fairing Scoop Trim, GL1800 7Fender Accent, GL1800 5Fender Accent/Ornaments 5, 32, 69Fender Tips/Trim Front 5Fender Trim Rear, GL1800 22Flags/Flag Holders 24-25Floorboard Covers 59Floorboard Splined Adapters 58Floorboards, GL1500/GL1800 18-19Floorboards, Metric Cruisers 57Footpeg(s) [Also See “Pegs”] 52-56
Adapter Master Chart 54Adapters, Can-Am Spyder 27Adapters, GoldWing 18Adapters, Male Mount 64Adapters, Metric Cruisers 54,58Adapters, Sport Bike 31Extenders 20For Metric Cruisers, Sport Bikes, GoldWing 52-53
Male Mount, for Cruise Pegs 62Mounts/Clevises 20, 65
Product Description Page #
Splined Adapters 58Fork Covers/Skins, Metric Cruisers 68Fork Dust Covers, GL1800 5Fork & Frame Mounted Driving Lights 35Frame Trim, VTX 73Fuel Injection Control Modules 90Fuel Treatment 92Furry Accessories (Bike Maps) 3Gas Cap, Sport Bike 34Gas Tank Door Trim, GL1800 11Glove Box Accents, GL1800 11GoldWing Accessories (Bike Map) 4Grip(s)
Master Chart 42-43For Can-Am Spyder 26,42For GL1800 12For Metric Cruisers 42-43For Sport Bikes 28
GPS Mount 14,50Handlebar Accents, Can-Am Spyder 26 Accents, GL1800 11 Accessories 44 Accessory Mounts 12,48 Control Covers 29,47 Risers, GL1800 13Heated Grips, for GL1800 ISO-Grips 12Heated Seats, for GL1800 17Heel-Toe Shifter, GL1800 18Helmet Locks 44,92Highway Pegs 63
GL1500 19GL1800 19Male Mount Pegs 67Multi-Application 52-56Honda 62-66Yamaha 62-66
Hypercharger 90-91Air Cleaners 91
ISO Grips 42-43Intake Trim, Sport Bike 32iPod Holder 14,50iPod Interface Cable, GL1800 13
95w w w . k u r y a k y n . c o m
Product Description Page #
ISOBoards 56Grips/Accessories, GL1800/1500 12Grips/Accessories, Metric Cruisers 42Grips, Can-Am Spyder 26,42Grips, Sport Bikes 28Pegs 19,55
Kickstand, Sport Bike 34Kickstand Extensions 18,56Kickstands, GL1800 18L.E.D. Products
Clix Pods 82Front Fender Accents 6Infinity Streamliner 90License Plate Illuminators 76License Plates, Lighted 77Mini Bullets 37Mud Flap 25Ring of Fire, GL1800 6Saddlebag Moldings, GL1800 22Silver Bullets 37Spoiler Lightbar, GL1800 21,23Super Lizard Lights 31,41Trunk Lid Handle, GL1800 21Turn Signal Accents for Ergo Arm 20
Levers, GL1500/1800 12Levers, Metric Cruisers 46Levers, Sport Bikes 29License Plate
Bolt Lights 76Bracket with Turn Signals, VTX 39Curved License Plate Holders 39,76Flag Mount 24Frames 38,76Hardware Kits 77Helmet Lock Mounts 77License Area Trim w/Lights, GL1800 22Marker Light Mounts 77Side Mounts, Sport Bike 77Sub Fender License Plate Bracket 76
Light Bars, Metric Cruisers 36Lighted Fork Tower Accents 6Lighted Grill, GL1800 7Lighted Saddlebag Moldings, GL1800 22
Product Description Page #
Lighted Trunk Moldings, GL1800 22Lightning Valve Covers, GL1800 8Liquid Horse Power Fuel Treatment 92Lizard Lights & Components 31,41Load Equalizers 40Louvered Chrome Battery Box Cover 10Lower Cowl Covers, GL1800 8Lowering Links, Sport Bike 34Luggage & Luggage Mount Kit 78-85Luggage Rack /Mount Kits & Risers 24Luggage Racks, Metric Cruisers 86Male Mount Footpegs 67Master Cylinder Covers, GL1500/GL1800 46-47Master Cylinder Reservoir Covers (Front), Metric Cruisers 46-47
Medallions 34,69-70Mini Bullet Lights 37Mirror Accents, GL1800 7Mirror Adapters, Metric Cruisers 30Mirror Lights, GL1800 9Mirror Mounts, Sport Bikes 30Mirrors 30,51-52Molding-Trunk/Saddlebag 22Mud Flap 25Mustache Bar, Yamaha 62Neck Covers 69Neck Covers, Sport Bike 32Offset Highway Pegs 63Passenger Armrests, GL1800 17Passenger Armrest Pouch, GL1800 16Passenger Backrest, GL1800 17Passenger Backrest, Metric Cruisers 87Passenger Cruise Pegs 66Passenger Drink Holder, GL1800 16Passenger Floorboards 56-57,66Passenger Floorboards, GL1800 19Passenger Pegs 66P-Clamps 38Peg(s) [Also See “Footpegs”]
Adapter Master Chart 54,58Adapters, Can-Am Spyder 27Adapters, GoldWing 18Adapters, Sport Bike 31GoldWing Specific 19
Product Description Page #
Universal/ Metric Cruisers 52-56Male Mount 67
Petcock Cover, VTX1300 70Pet Carrier, Bag 78PIAA Bulbs 42Polish 92Quick Clamps 65Raider Accessories (Bike Map) 2Rear Airfoil 15Rear Fender Trim, GL1800 22Rear Wheel Ring of Fire, GL1800 6Reservoir Cap, Sport Bikes 33Right Angle Mounts 65Ring of Fire, GL1800 6Risers, GL1800 13Risers, Sport Bike 29Road Star Accessories (Bike Map) 1Rotor Covers, GL1800 6Run-Turn-Brake Controller 40Saddlebags 80,84-85Saddlebag Accents, GL1800 10,22Saddlebag Molding, GL1800 22Seats & Seat Covers, GL1800 6-7Shark Gills, GL1800 9Shark Skins, GL1800 9Shark Tooth Fender Accent, GL1800 5Shift Peg Covers 60Silver Bullets & Components 37-38Speakers 48Speaker Accents, GL1800 11Splined Adapters, GL1800 18Splined Adapters, Metric Cruisers 58Splined Adapters, Sport Bikes 31Spoiler, GL1800 23Spoiler End Trim, GL1800 21Spoiler Light Bar, GL1800 21Swingarm Covers 73-75Swingarm Extensions, Sport Bike 34Switch Housing Covers, Metric Cruisers 47Switch Housing Covers, Sport Bike 29Taillights 38Taillight Top Cover, Sport Bike 33Tank Protectors, Sport Bikes 31Tank Trim, Sport Bike 33
Product Description Page #
Tank Trim, GL1800 11Tappet Block Covers, Yamaha 72Throttle Cruise Assist 45Throttle Boss, GL1800 12Throttle Boss, Metric Cruisers 44Throttle Boss, Sport Bikes 29Timing Chain Cover Set 8Trailer Hitch Receptacle 25Trailer Hitch, GL1500/GL1800 25Trailer Wiring Harnesses 25Transmission Covers 70Travel Mug 92Triple Whammy Run-Turn-Brake Kits 40Trunk Keyhole Trim, GL1800 21Trunk Lid Handle, GL1800 21Turn Signal(s) 39-40
Adapter Plug, GL1800 6L.E.D. Conversion 39Lenses 41Mirrors 51Relocator Kit 77,84Universal Silver Bullets 37
VTX1300 Accessories (Bike Map) 1Wheel Chocks 93Wind Directors 15Windshield, GL1800 15Windshield, Metric Cruisers 87Windshield Trim, Can-Am 26Windshield Trim, GL1800 7Wiring & Relay Kit 25,36Zombie Medallions 34,69,70
96 8 7 7 . 3 7 0 . 3 6 0 4
küryakyn terms of businessDealers See Confidential Price List For Complete Terms of Business
Küryakyn, Wild Things, Wild Things Performance, Widow, Flame, Liberator, & ISO are registered trademarks of Küryakyn Holdings, Somerset WI, U.S.A.
Zombie, Illiana, Chauvinist, Scythe, AirMaster, Pilot, Stiletto, Kaiser, Retro, Tour-Tech, Magnum, The Chrome Mustache, Ergo, Ergo-Guard, Transformer, Dragon Wing, Sound of Chrome, Snap-N-Go, Hypercharger, Corsair, Scarab, Crusher & Beast Ovals are trademarks of Küryakyn Holdings, Somerset WI, U.S.A.
Listed manufacturers & product model names are for reference only. Can-Am, Honda, Kawasaki, Suzuki, Star, Triumph, Victory, Yamaha & their product names in this catalog are based on general industry terms for the motorcycles these manufacturers produce.
COPYRIGHT 2010 KÜRYAKYN® USA ALL RIGHTS RESERVED
Return Policy: Merchandise may be returned up to one year from the date of purchase. Returns must be processed through original seller. Returned merchandise for any other reason other than warranty claims must be in like new condition & subject to a 20% restocking fee. All returns are subject to inspection for determination of full or partial credit. Any returned part that shows evidence of being used or installed contrary to manufacturer’s instructions, &/or subjected to improper handling, packaging or return shipping by the customer, will not be eligible for exchange, refund or warranty consideration. All returned electrical items will be inspected & tested. If electrical item is deemed functional, no credit will be issued & item will be returned. All sales are final on discontinued or closeout merchandise.
Return Instructions: Contact one of our prompt, courteous Customer Service representatives toll free at 877-370-3604. Be sure to have the following information available when you call: _Name_Part number(s) to be returned_Copy of original invoice_Reason for return
1. Obtain R.M.A. number which shall remain active & valid for 60 days. (Important: Issuance of R.M.A. does not represent an authorized credit.)
2. Carefully package merchandise to avoid damage during shipment. Depending on its condition, original packaging may not be sufficient.
3. Ship only those items for which the R.M.A. has been issued.
4. Write the R.M.A. number prominently on the outside of package.
5. Ship package freight PREPAID (C.O.D.s will not be accepted) to:
Payment Terms: We accept Visa, MasterCard, American Express or Discover. International customers must pay any customs charges, VAT, taxes, or other costs, in addition to the shipping charge. For customers in Indonesia or Singapore or Nigeria we require prepayment by wire transfer only.
Prices: Prices are subject to change without notice. We try to avoid mid-year price changes, but reserve the right to adjust prices if our costs increase. Additionally, in the event a mistake was made in our price list or catalog, we reserve the right to bill at the prevailing prices in place at the time of shipment.
Freight: Freight is F.O.B. Somerset, WI
Backorders: For your convenience, backorders are tracked electronically & will be shipped automatically. If a backorder is over 90 days, we will ship, pending approval.
Damaged Shipments: Should a shipment arrive in damaged cartons, sign only for the packages received & be sure to indicate that they arrived damaged. Keep the cartons & inspect the merchandise for damage or shortages. Notify us immediately if necessary.
Shortages/Overages: Should you receive an order with a missing item or an extra item is included (but not invoiced), please contact our customer service department. All shortages or overages must be reported within 5 days of receipt of the goods. Please have the invoice number & the number of packages received available when you call.
Limited Warranty: Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials & workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:
1. Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).
2. The product must be properly installed, maintained & operated under normal conditions.
3. Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.
4. Küryakyn shall not be liable for any consequential & incidental damages, including labor & paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn & a customer.
5. Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
6. Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. L.E.D.’s contained in components of Küryakyn products will be warranted for defects in materials & workmanship for 3 years from the date of purchase where as all other components shall be warranted for one (1) year. This includes, but is not limited to; control modules, wiring, chrome & other components.
7. Exhaust systems are warranted for manufacturing defects only. There is no warranty on exhaust pipes & mufflers with regard to any discoloration. Discoloration or “blueing” is caused by tuning characteristics, exhaust timing, carburetor jetting, overheating, etc. & is not caused by defective manufacturing.
8. Küryakyn makes no warranty of any kind in regard to other manufacturer’s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer & where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.
Küryakyn
454 County Road VV
Somerset, WI 54025
LIGHTED TRUNK MOLDINGpg 23
TRUNK TAILLIGHT ACCENTS Online
SPOILER END TRIM pg 21
LUGGAGE RACKpg 24
REAR AIRFOILpg 15
L.E.D. LIGHTED TRUNK LID HANDLE pg 21
TRUNK KEYHOLE TRIM pg 21
L.E.D. SPOILER RUN-TURN-BRAKE LIGHTBAR
pg 21
L.E.D. REAR REFLECTOR CONVERSION pg 22
TRAILER HITCH pg 25
REAR FENDER TRIMpg 22
DEBRIS MODULATOR MUD FLAPpg 25
SADDLEBAG TAILLIGHT ACCENTS Online
LIGHTED SADDLEBAG MOLDING pg 22
CURVED LAYDOWN LICENSE PLATE FRAME
pg 76
SADDLEBAG SPOILERS pg 21
SADDLEBAG BOTTOM TRIM MOLDING pg 22
Küryakyn454 County Road VVSomerset, WI 54025
PHONE 715.247.2184 | FAX 715.247.5007 | [email protected]