Kuristuck Technology – Paint booth treatment
-
Upload
kurita -
Category
Technology
-
view
205 -
download
2
Transcript of Kuristuck Technology – Paint booth treatment
efficiency for industry
Paint Booth Treatment
Kuristuck Technology
Kurita offers original and practical Kuristuck
technology to recover excess paint and therefore
support sustainabe paint booth operation.
Comprehensive product range for solvent and/or
water borne paints for the purpose of:
• Safe and efficient booth operation
• Total Cost of Ownership reduction
2
Kuristuck Technology - Introduction
3
Kuristuck Technology - Introduction
Targets
4
Kuristuck Technology - Introduction
F
Air
1
2
Water Circulation Pump
Exhaust Fan
PWater Pit
1 Water screen
2 Under section and piping
3 Exhaust line
4 Water pit
5 Sludge recovery
Paint Sludge Recovery System
Recovered Sludge
P
Intake Pump
3
5
4
Paint Booth Design / Lay-Out
5
Purpose at spray booth & exhaust line
Kuristuck Technology – Purpose/Target
2 No blockage in water circulation piping
1 Prevent fouling on water screen board(Causes problem of air balance)
3 Prevent fouling, corrosion & bad smell at
exhaust line
6
Purpose at water pit & sludge recovery system
Kuristuck Technology – Purpose/Target
4 No foaming (over flow), bad smell formation.
Proper sludge floatation.
No clogging of water circulation pipe lines.
5 Reduce sludge moisture content (for lower volume of waste sludge).
Proper sludge recovery system operation.
7
Kuristuck Technology - Introduction
Water borne paint Solvent borne paint
Clear coat
Base coat
Primer coat
Steel board
Innovative Kuristuck technology for paint
detackification and coagulation for both water borne
and solvent borne paints.
Types of paints
8
Kuristuck Technology - Product Range
Kuristuck Technology
Kuristuck B-200 Kuristuck B-210 Kuristuck B-450 Kuristuck B-456
Paint killer and
coagulation aid for
water borne paints
Charge neutralizer
with antifoaming
effect for solvent
borne and water
borne paints
Effective coagulant
for water borne
paints
Paint detackifier
and coagulation aid
for solvent borne
paints
Kuristuck B-800
Paint killer for
solvent borne and
water borne paints
9
Key: Detackification of the over spray paint
Product range for solvent borne paints
Complete concept for smooth plant operation
Kuristuck B-200
Kuristuck B-450
Kuristuck B-800
Complementary products
Odor control agent : Kurirazer
Sludge dewatering: Ferrocryl / Kuriflock
10
Kuristuck benefits in case of solvent borne paints
Successful
detackification
of the over
spray paint
No trouble of
bad smell
Less fouling on
water screen
board and
blockage in
piping
Prevention of
pH fluctuation,
therefore
corrosion
Key: Efficient coagulation and foam
prevention
11
Product range for water borne paints
Complete concept for smooth plant operation
Kuristuck B-200 / B-210
Kuristuck B-450 / B-456
Kuristuck B-800
Complementary products
Antifoaming agent : Contraspum®
Odor control agent : Kurirazer
Sludge dewatering: Ferrocryl / Kuriflock
12
Kuristuck benefits in case of water borne paints
Efficient
coagulation
and sludge
sedimentation
No trouble of
foaming, bad
smell
High sludge
recovery rate,
therefore less
cleaning load
Water savings
thanks to less
blowdown
water
13
• Detackification of the over spray paint
• Low moisture content of the paint sludge
• Blow down water reduction
• No trouble of foaming, bad smell
• Prevention of pH fluctuation
Paint booth treatment customers’ expectations
Ideal condition no fouling in circulation line
Over spray quantity (INPUT)
=
Sludge recovery quantity (OUTPUT)
14
Kuristuck Technology - Benefits
Improved
detackification
Reduced water
discharge from
water pit
Reduced
chemical
consumption
Reduced
cleaning
frequency
Total Cost of Ownership reduction
Reduced
sludge
moisture
Increased
sludge
recovery rate
More than 100 global references available
15
Kuristuck Technology – Supporting documents
Including industries like – Automotive and electrical,
spare parts manufacturers
Including case studies
Including reference lists
TWITTER Follow us
LinkedIn Follow us
YouTube Follow us
www.kurita.eu
This document is proprietary. Any kind of reproduction, change, transfer to a third party or disclosure of this document, even extracts, requires the prior written consent of Kurita Europe GmbH.
Contact information