Kung Fu Panda Master Mantis - hp.com · Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C. ©...
6
Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C. © 2008 Hewlett-Packard Company hp.com/go/activitycenter Kung Fu Panda™ 3-D Paper Character Master Mantis ASSEMBLY INSTRUCTIONS Time to Complete: Approximately 60 minutes Level: Difficult GETTING STARTED Materials: • Metal-edged ruler • Butter knife • Scissors or X-ACTO knife • Cutting mat (optional) • Multipurpose glue • Pencil 1. Score all the pieces: Using a ruler as a guide, run the back side of a butter knife firmly along all the dotted lines. 2. Using scissors or an X-ACTO knife and cutting mat, cut out all pieces along the solid lines. Cut slits where indicated on thorax. ASSEMBLE THE LEGS 3. On each leg (1), tuck the small triangular tab behind the adjacent edge to form an “L” shape and glue in place. 4. Fold long tabs inward, dab glue where marked and glue in place. ASSEMBLE THE FORELEGS AND ARMS 5. Fold each square foreleg segment (2) in half and glue together. Then, cut out along the solid lines.
Transcript of Kung Fu Panda Master Mantis - hp.com · Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C. ©...
Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C.
© 2008 Hewlett-Packard Company hp.com/go/activitycenter
Kung Fu Panda™ 3-D Paper Character Master Mantis ASSEMBLY INSTRUCTIONS Time to Complete: Approximately 60 minutes Level: Difficult
GETTING STARTED Materials: • Metal-edged ruler • Butter knife • Scissors or X-ACTO knife • Cutting mat (optional) • Multipurpose glue • Pencil
1. Score all the pieces: Using a ruler as a guide, run the back side of a butter knife firmly along all the dotted lines.
2. Using scissors or an X-ACTO knife and cutting mat, cut out all pieces along the solid lines. Cut slits where indicated on thorax.
ASSEMBLE THE LEGS
3. On each leg (1), tuck the small triangular tab behind the adjacent edge to form an “L” shape and glue in place.
4. Fold long tabs inward, dab glue where marked and glue in place.
ASSEMBLE THE FORELEGS AND ARMS
5. Fold each square foreleg segment (2) in half and glue together. Then, cut out along the solid lines.
Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C.
© 2008 Hewlett-Packard Company hp.com/go/activitycenter
6. On each arm (3), fold the shoulder segment as shown, and glue tab in place.
7. Insert a foreleg into the end of the each arm, fold arm in half on dotted line and glue together.
ASSEMBLE HEAD AND THORAX
8. Fold head (4) tabs inward, and glue top panel down.
9. Insert arms through the appropriate slits, as shown. Then fold and glue inserted tabs to inside of thorax.
10. Fold thorax inward on dotted lines and glue in place.
Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C.
© 2008 Hewlett-Packard Company hp.com/go/activitycenter
ASSEMBLE THORAX AND ABDOMEN
11. Glue A tabs to the left side of the abdomen (5), curving the piece as you work.
12. Glue B tabs to the right side, curving the piece as you work.
13. Place a dab of glue on the remaining tabs. Glue them to the end of the abdomen as shown.
ATTACH THE LEGS
14. Place a dab of glue on the top of the abdomen where marked with black dots. Insert two legs through the slits and two under the head, and glue in place as shown.
15. Place a dab of glue on the remaining thorax tabs. Glue to the back of the abdomen as shown.
Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C.
© 2008 Hewlett-Packard Company hp.com/go/activitycenter
FINISHING TOUCHES
16. Use a pencil to gently curl arms and wings (6) as shown.
17. Place a dab of glue on wing tabs. Glue to the back of the abdomen on top of thorax tabs.
18. On each side of the face (7), tuck white triangle behind so cut mark meets dotted line. Glue in place.
19. Fold face gently on vertical dotted line, then place a dab of glue on the head where marked. Glue the face to the head as shown.
20. You’re done!
