KSHA04 - Rexton · Battery life (Cell Zinc Air) ~280 h ~280 h ~220 h ~220 h Battery life...
Transcript of KSHA04 - Rexton · Battery life (Cell Zinc Air) ~280 h ~280 h ~220 h ~220 h Battery life...
-
•16frequencychannels•8compressioncontrols•4channelAGCO•RICtechnology(with45dB,55dB,65dB,75dBexternalreceiver)
•Applicableformildtoseverehearinglosses•ToggleSwitch•5memories•13battery(rechargeableoption)
Highlights•Wirelesstechnology -StereoAudioStreaming (via Mini Blu® RCU/Blu RCU) -BluetoothConnectionwithmobilephone (via Mini Blu
RCU/Blu RCU) -Signalprocessingcoupling -Programcoupling -Volumecontrolcoupling -Remotecontroloption -Wirelessprogramming•AutoPhone®•Telecoil•Focus360°•SoundLocator(OmniSL)•Equalizer(viaBluRCU)•SoundRadiance•AutomaticEqualizer•AutomaticAcclimatization•Multichanneladaptivedirectionalmicrophone•RealTimeDisplay
Premium Features•FeedbackPreventer•SoundSmoothing®
•Windnoisecancellation•Automaticdirectionalmicrophone•Automaticadaptivenoisereduction•DataLogging•BasicandPolyphonicsignaltones•Batterydooron/off•SecureTecNanocoating
Options & Accessories•MiniBluRCU/BluRCU•Remotecontrol•ePen®remotecontrol•Charger•WirelessprogrammingviaConnexxLink®•Wiredprogrammingviaprogrammingadaptor13
Open DomesClosed DomesReceiver Mold (no vent)
Hea
ring
loss
f
S-Receiver (45 dB)
Open DomesClosed DomesReceiver Mold (no vent)
Hea
ring
loss
f
M-Receiver (55 dB)
Receiver Mold (no vent)Double Domes
Hea
ring
loss
fP-Receiver (65 dB)
Custom Shell
f
Hea
ring
loss
HP-Receiver (75 dB)
KSHA04
-
KSHA04 - Technical Data KSHA04 - Technical Data
S-Receiver (measured with Closed Dome)
M-Receiver(measured with Closed Dome)
2 ccm coupler
Ear simulator
2 ccm coupler
Ear simulator
ANSI S3.22-2009
IEC 60118-7: 2005
IEC 118-0/
A1
ANSI S3.22-2009;IEC 60118-7:
2005
IEC 118-0/
A1
Output Sound Pressure Level
at 1.6 kHz – 107 dB – 122 dB
Peak 108 dB 117 dB 119 dB 129 dB
HFA2-OSPL 90 101 dB – 114 dB –
Gain
Full-on Gain (FOG) at 1.6 kHz – 38 dB – 52 dB
Full-on Gain (Peak) 45 dB 54 dB 55 dB 65 dB
HFA-FOG 37 dB – 46 dB –
Reference Test Gain 24 dB 32 dB 37 dB 45 dB
Frequency Range* (DIN 45605)
Low frequency limit 110 Hz 200 Hz* 120 Hz 180 Hz*
High frequency limit 7600 Hz 7800 Hz* 8500 Hz 9400 Hz*
Total Harmonic Distortion
500 Hz 1 % 1 % 1 % 1 %
800 Hz 1 % 1 % 1 % 1 %
1600 Hz 1 % 1 % 1 % 1 %
Equivalent Input Noise 19 dB 20 dB 19 dB 18 dB
Inductive Coil Sensitivity
MASL1 (1 mA/m) at 1.6 kHz – 69 dB – 80 dB
HFA2 MASL (1 mA/m) 65 dB – 76 dB –
HFA SPLITS3 (left/right) 81/80 dB – 94/93 dB –
RSETS4 (left/right) -3/-4 dB – -3/-4 dB –
AGC-O (fully activated)
Attack time 5 ms – 5 ms –
Release time 680 ms – 680 ms –
Battery-Type 13
Battery Voltage 1.3 V 1.3 V 1.3 V 1.3 V
Battery current drain 0.8 mA 0.8 mA 1.0 mA 1.0 mA
Battery life (Cell Zinc Air) ~280 h ~280 h ~220 h ~220 h
Battery life (rechargeable) ~21 h ~21 h ~17 h ~17 h
IRIL5 IEC 118-13:2004 (bystander)
800-960 MHz < -10 dB
1400-2000 MHz < -10 dB
ANSI C63.19 M4/T4
Directivity Index at 2.5 kHz 2.8
1MASL= Magneto Acoustical Sensitivity Level 2HFA= High Frequency Average 3SPLITS=Coupler SPL for an Inductive Telephone Simu-lator 4RSETS=Relative Simulated Equivalent Telephone Sensitivity 5IRIL=Input Related Interference Level
P-Receiver (measured with Receiver Mold- Westone)
HP-Receiver(measured with Custom Shell- Rexton)
2 ccm coupler
Ear simulator
2 ccm coupler
Ear simulator
ANSI S3.22-2009
IEC 60118-7: 2005
IEC 118-0/
A1
ANSI S3.22-2009;IEC 60118-7:
2005
IEC 118-0/
A1
Output Sound Pressure Level
at 1.6 kHz – 125 dB – 134 dB
Peak 122 dB 132 dB 130 dB 138 dB
HFA2-OSPL 90 116 dB – 123 dB –
Gain
Full-on Gain (FOG) at 1.6 kHz – 62 dB – 80 dB
Full-on Gain (Peak) 65 dB 75 dB 75 dB 85 dB
HFA-FOG 55 dB – 66 dB –
Reference Test Gain 39 dB 48 dB 46 dB 59 dB
Frequency Range* (DIN 45605)
Low frequency limit 110 Hz 160 Hz* 100 Hz 270 Hz*
High frequency limit 8500 Hz 9100 Hz* 7400 Hz 8066 Hz*
Total Harmonic Distortion
500 Hz 1 % 1 % 1 % 1 %
800 Hz 1 % 1 % 1 % 2 %
1600 Hz 1 % 1 % 1 % 1 %
Equivalent Input Noise 19 dB 20 dB 19 dB 16 dB
Inductive Coil Sensitivity
MASL1 (1 mA/m) at 1.6 kHz – 91 dB – 109 dB
HFA2 MASL (1 mA/m) 85 dB – 96 dB –
HFA SPLITS3 (left/right) 95/94 dB – 104/103 dB –
RSETS4 (left/right) -4/-5 dB – -2/-3 dB –
AGC-O (fully activated)
Attack time 5 ms – 5 ms –
Release time 680 ms – 680 ms –
Battery-Type 13
Battery Voltage 1.3 V 1.3 V 1.3 V 1.3 V
Battery current drain 0.9 mA 0.9 mA 1.0 mA 1.1 mA
Battery life (Cell Zinc Air) ~250 h ~250 h ~220 h ~200 h
Battery life (rechargeable) ~19 h ~19 h ~17 h ~15 h
IRIL5 IEC 118-13:2004 (bystander)
800-960 MHz < -10 dB
1400-2000 MHz < -10 dB
ANSI C63.19 M4/T4
Directivity Index at 2.5 kHz 2.8
1MASL= Magneto Acoustical Sensitivity Level 2HFA= High Frequency Average 3SPLITS=Coupler SPL for an Inductive Telephone Simu-lator 4RSETS=Relative Simulated Equivalent Telephone Sensitivity 5IRIL=Input Related Interference Level
-
KSHA04 - Basic Data (S-Receiver, Closed Dome) KSHA04 - Basic Data (M-Receiver, Closed Dome)
2 ccm coupler Ear simulator
Basic Acoustic Response(Li = 60 dB)IEC 118-0/A1
Output Sound Pressure Level (Li = 90 dB) IEC 60118-7:2005; ANSI S3.22-2009
Full on Gain (Li = 50 dB) IEC 60118-7:2005; ANSI S3.22-2009
Output Sound Pressure Level (Li = 90 dB)IEC 118-0/A1
Full on Gain (Li = 50 dB)IEC 118-0/A1
Frequency Response (Li = 60 dB) IEC 60118-7:2005; ANSI S3.22-2009
Effect of MPO (FOG, f=2kHz)IEC 60118-7:2005; ANSI S3.22-2009
DirectionalCharacteristic
Gain
70
60
50
40
30
Gain
20
6
5
6
5
6
5
6
5
dBspl
dBspl
90
70
130
110
1 kHz
500 Hz
2 kHz
10
0
70
60
50
40
30
20
10
0
Inductive Response
Inductive Response (H = 10 mA/m) IEC 60118-7:2005;
SPLITS curve left (H = 31.6 mA/m)ANSI S3.22-2009
SPLITS curve right (H = 31.6 mA/m)ANSI S3.22-2009
6
5
6
5
2 ccm coupler Ear simulator
Basic Acoustic Response(Li = 60 dB)IEC 118-0/A1
Output Sound Pressure Level (Li = 90 dB) IEC 60118-7:2005; ANSI S3.22-2009
Full on Gain (Li = 50 dB) IEC 60118-7:2005; ANSI S3.22-2009
Output Sound Pressure Level (Li = 90 dB)IEC 118-0/A1
Full on Gain (Li = 50 dB)IEC 118-0/A1
Frequency Response (Li = 60 dB) IEC 60118-7:2005; ANSI S3.22-2009
Effect of MPO (FOG, f=2kHz)IEC 60118-7:2005; ANSI S3.22-2009
Gain80
70
60
50
40
30
90
Gain70
60
50
40
30
20
80
90
20
dBspl
dBspl
Inductive Response
Inductive Response (H = 10 mA/m) IEC 60118-7:2005;
SPLITS curve left (H = 31.6 mA/m)ANSI S3.22-2009
SPLITS curve right (H = 31.6 mA/m)ANSI S3.22-2009
-
KSHA04 - Basic Data (P-Receiver, Westone Mold) KSHA04 - Basic Data (HP-Receiver, Rexton Shell)
2 ccm coupler Ear simulator
Basic Acoustic Response(Li = 60 dB)IEC 118-0/A1
Output Sound Pressure Level (Li = 90 dB) IEC 60118-7:2005; ANSI S3.22-2009
Full on Gain (Li = 50 dB) IEC 60118-7:2005; ANSI S3.22-2009
Output Sound Pressure Level (Li = 90 dB)IEC 118-0/A1
Full on Gain (Li = 50 dB)IEC 118-0/A1
Frequency Response (Li = 60 dB) IEC 60118-7:2005; ANSI S3.22-2009
Effect of MPO (FOG, f=2kHz)IEC 60118-7:2005; ANSI S3.22-2009
Gain80
70
60
50
40
30
90
Gain70
60
50
40
30
20
80
90
20
dBspl
dBspl
Inductive Response
Inductive Response (H = 10 mA/m) IEC 60118-7:2005;
SPLITS curve left (H = 31.6 mA/m)ANSI S3.22-2009
SPLITS curve right (H = 31.6 mA/m)ANSI S3.22-2009
2 ccm coupler Ear simulator
Output Sound Pressure Level (Li = 90 dB) IEC 60118-7:2005; ANSI S3.22-2009
Full on Gain (Li = 50 dB) IEC 60118-7:2005; ANSI S3.22-2009
Output Sound Pressure Level (Li = 90 dB)IEC 118-0/A1
Full on Gain (Li = 50 dB)IEC 118-0/A1
Frequency Response (Li = 60 dB) IEC 60118-7:2005; ANSI S3.22-2009
Effect of MPO (FOG, f=2kHz)IEC 60118-7:2005; ANSI S3.22-2009
Inductive Response
Inductive Response (H = 10 mA/m) IEC 60118-7:2005;
SPLITS curve left (H = 31.6 mA/m)ANSI S3.22-2009
SPLITS curve right (H = 31.6 mA/m)ANSI S3.22-2009
Basic Acoustic Response (Li = 60 dB)IEC 118-0/A1
dBspl
dBspl
Gain80
70
60
50
40
30
90
20
Gain70
60
50
40
30
20
80
90
-
KSHA04
Rev.02/12PN10536094/aSubjecttochangewithoutpriornotice
WARNING!Choking hazard posed by small parts. This instrument is not intended for the fitting of infants, small children and persons of mental incapacity. The information in this document contains general descriptions of the technical options available, which do not always have to be present in individual cases and are subject to change without prior notice. The required features should therefore be specified in each individual case at the time of conclusion of the respective contract.
WARNINGInstrumentcontainssmallparts.Chokinghazard!Do not use this instrument for the fitting of infants, small children or persons of mental incapacity.
WARNINGInstrumenthasanoutputsoundpressurelevelof132dBSPLormore.Riskofimpairingtheresidualhearingoftheuser.Take special care when fitting this instrument.
TheBluetooth®wordmarkandlogosareownedbytheBluetoothSIG,Inc.andanyuseofsuchmarks
byCostcoWholesaleisunderlicense.