KS navigator rudder instruction · Assembly and installation instruction ITEM: KS-navigator rudder...
Transcript of KS navigator rudder instruction · Assembly and installation instruction ITEM: KS-navigator rudder...
Assembly and installation instructionITEM: KS-navigator rudder
Dated 26.1.2012PAGE 1/5
RUDDER MODELS
product name: KS-navigator rudder, pin 42 mmcode: 530210 blade length 500 mm pin requires separately sold rudder sleeve.
product name: KS-navigator rudder, pin 85 mmcode: 530250 blade length 500 mm pin can be installed in a through hole in the back of the kayak, no additional rudder sleeve required
Rudder sleeve(optional)
Assembly methods
Navigator pin 42 mm Navigator pin 85 mm
not included
Assembly and installation instructionITEM: KS-navigator rudder
Dated 26.1.2012PAGE 2/5
PART LIST
(1) (2) (3) (4) (5)
(6) (7) (8)
(9)
1. KS-rudder head, pin 42 mm code: 530331 2. KS-rudder head, pin 85 mm code: 5303353. KS-rocker part code: 5303414. KS-rudder blade, 500 mm code: 5303115. KS-rudder blade, 600 mm code: 5303216. KS-rope stopper with spring code: 5303517. KS-knob for rudder blade code: 5303528. Screw 3,5 mm x 19 mm DIN 79839. Support rope for rope stopper 5 mm x 1500 mm10. Lift up rope 3 mm x 3500 mm11. Bungee cord 5 mm12. Lock ring (for rudder head pin 85 mm)
(11)
(10)
(12)
Assembly and installation instructionITEM: KS-navigator rudder
Dated 26.1.2012PAGE 3/5
Assembling the KS-navigator rudder
1. Push the rocker part between the wings of the head part. Short axels of rocker part will snap into the holes of the head part and stay locked.Check the connection by rotating the rocker part 90 degrees (slides smoothly).
Rocker part rotates 90˚
2. Complete the rudder blade assembly :A) Insert the blade knop (long) into the rudder bladeB) Place the blade knop (short) to top of itC) Push 5 mm bungee cord in to the rudder blade knop (long) Push rope 3 mm in to the rudder blade knop (short) Fix the connection with screw 3,5 mm x 19 mm
Complete rudder blade assembly!(A) (B) (C)
5 mm bungee
3 m
m ro
pe
Assembly and installation instructionITEM: KS-navigator rudder
Dated 26.1.2012PAGE 4/5
3. Slide the rudder blade inside in to the rudder rocker part. 4. Tie the 5 mm bungee cord free end in to the rudder head part Holes in the end of the wings are for steering rope connection
(3) (4)
slid
e bl
ade
insi
de in
to
the
rock
er p
art
string the returning bungee cord through the hole in the rudder head part and make a simple knot in to the backside
String the steering rope through and tie it with proper knot.
Assembly and installation instructionITEM: KS-navigator rudder
Dated 26.1.2012PAGE 5/5
Lift up rope mechanism
Support rope for rope stopeer 5 mm
Lift up rope 3 mm
KS Deckfitting 34/11 KS rope stopper with spring
KS deckfitting 34/11
Navigator lift up rope can be car-ried nicely on a kayak deck with KS rope loops.KS rope loops allows rope free movementn and can easily be fit-ted on top of normal deckfitting.
Detailed view
Rope stopper is located close to kayak cockpit area so that it’s handy to operate
KS Deckfitting 34/11
KS Rope loop
Navigator lift up rope 3 mm