Krug Seating and Tables

MANAGEMENT & TASK SEATING

1622233339454753576466677175767980

MeDorso EDorso TDorso WeaveDorsoDorso GuestPan AmModenaCadenceRhythmBluesStartSpinMeritSierraChurchillKent

GUEST SEATING

82848688899192939596979899100101102102

AddisonBlakeDorsoBaliKitaSpenceIconEvansOvalSierraTuskRichmondEscortK2CadenceBluesKent

MULTI-PURPOSE SEATING

104105106107109110111112112113

BaliCan CanStartCapriThelmaLouiseBank of EnglandClarendonHamptonLink

TABLE OF CONTENTS

SOFT SEATING

118119120121122123124125126127127128129130131

SuttonSeraRivoliCarlyle BenchStudioStudio TaskCarlyleSloaneBaxterGriffinMontereyCelloBrioTerraFresco

OCCASIONAL TABLES

134135136137138139140141142143144145146

SuttonSeraVirtuMontereyLagunaNapaTiburonStratfordMillenniumPradoMondrianCarlyleRathburn

INDEX

147 Index

USA | 1

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

GENERAL INFORMATION

Terms and ConditionsNet 30 days. A late payment charge of

1% per month will be applied on overdue

invoices. This charge will be pro-rated to

the number of days past 30 days that the

invoice is overdue. Prices include

shipping to a Krug territorial warehouse.

All applicable sales taxes are extra.

Distribution of this price list does not in

itself constitute an offer to sell. Orders

can be received only from authorized

Krug dealers. Acceptance of any order

and terms of sale may be established at

the discretion of Krug. Deposits are

required on orders received from new

accounts as well as on large or special

orders. Krug reserves the right to

discontinue designs, or to change designs,

construction, prices, or materials without

notice.

Customer Service HoursPlease note Customer Service hours are:

8:30 am to 5:00 pm est

1.888.578.KRUG

1.519.748.5177 fax

Order AcknowledgementsEach order will be acknowledged via

email or fax. This acknowledgement is

the final agreement between Krug and

the customer, superseding all previous

communications regarding the purchase

order. Where there is a discrepancy on a

purchase order between a product code

and a description, Krug will make every

effort to resolve the discrepancy, but will

be ruled by the product code ordered.

Please check all acknowledgements for

accuracy, and advise Krug of any

discrepancies with a purchase order.

CancellationA cancellation can be made only by

expressed agreement with Krug. A

cancellation fee may be incurred for

restocking.

DimensionsDimensions are in inches and

approximate, and subject to change

without notice. Contact Customer

Service if dimensions are critical.

Blanket WrappingKrug will blanket wrap seating

orders at a customer’s request.

Please indicate on your purchase

order and contact Customer Service.

Storage ChargesKrug reserves the right to assess a

nominal storage charge if a customer

does not accept shipment of an

order within a week of the ship date.

Contact InformationPhone: 1.888.578.KRUG

Fax: 1.519.748.5177

Purchace Order Fax: 1-888-236-4783

Web: www.krug.ca

Email: [email protected]

Installation SupportFor assistance please contact Customer

Service at 1-888-578-5784 and you will

be directed to the appropriate installation

support person.

PricingKrug endeavors to ensure that all prices in

this price list reflect accurately our current

prices. However, errors do occur and will be

rectified through notices to the field. Krug

reserves the right to acknowledge pricing

that may be different from the price list.

WarrantyKrug warrants the construction and the

finish of all our products to be free from

defects in materials and workmanship for a

period of 10 years from the date of

purchase. This warranty does not apply to

components not manufactured by Krug

including textiles, which are subject to the

specific warranties of those manufacturers,

if any. Textile (fabric, leather, vinyl, or any

other covering material) suppliers do not

guarantee their products for durability and

color fastness, and nor does Krug. Casters,

mechanical and electrical components have

a warranty of five years from the date of

purchase. The Krug warranty does not

apply to COM-specified materials, damage

caused by a carrier other than Krug, or

variation in wood finishes due to natural

wood color variation. Krug cannot be held

responsible for variations in fabric dye lots

from order to order. All fabric is carefully

inspected when it is received, but a degree

of variation in color should be expected.

Repair or replacement of any defect

covered by the Krug warranty will be made

at no charge to the original purchaser

during the warranty period.

This warranty policy does not apply to

defects resulting from negligence, misuse,

alteration, improper cleaning, stains or

accidents. Krug’s judgement will be final in

all matters concerning the condition of the

furniture, the cause or nature of the defect,

and the necessity or manner of repair.

Although Krug ensures the highest quality

workmanship in all of its products, Krug

does not warranty against normal wear,

fading, or damage that has occurred during

the life of Krug leather upholstery. All

leather pulls with use, especially in soft

seating applications. Puddling and

stretching is generated by repeated use and

is a hallmark of genuine leather and not

considered a defect.

Krug is not responsible for the damage or

degradation of product that may occur due

to extreme hot or cold temperatures after

it has left Krug.

Krug product should not be exposed to any

extreme hot or cold temperatures during

its life. All products should be stored in

climate-controlled warehousing and should

be transported on climate-controlled

trailers and containers, in order to protect

its integrity. Trailers and containers should

not be used for storage of products.

Products should remain in a climate-

controlled environment until the time that

transport commences, and should be moved

into a climate-controlled environment as

soon as transport is completed. Exposure

to extreme heat or cold temperatures voids

the Krug warranty.

This warranty applies to products sold in

North America only, and is made by Krug

only to the original purchasers acquiring

our products through authorized Krug

dealers, directly from Krug, or from others

specifically authorized to sell our products.

Exceptions to Krug’s 10 year warranty2 | USA

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

GENERAL INFORMATION

program include Thelma and Louise

stacking chairs which have a limited

warranty of one year, as well as Capri

stacking chairs which have a limited

warranty of two years from the date of

purchase. Seating products intended for

24 hour usage receive a warranty of

3 years from date of purchase.

Export PackagingKrug is pleased to provide the option for

export packaging on all our products, to

provide additional protection from

damage.

Export packaging is provided at an

upcharge of 5% of the net selling price

per item.

Export Packaging is STRONGLY

RECOMMENDED for:

(A) all shipments outside of the lower

48 states and Canada

(B) all shipments that will be held in

storage for an extended period prior to

installation

Important: Please note that Krug will not

be responsible for damage claims on

product shipped or stored in the above

conditions but where export packaging

has not been utilized.

Please contact Customer Service for

specifications or any other assistance

regarding export packaging.

Freight Terms and Conditions1. All product is shipped FOB the Krug

factory, with freight pre-paid to the

destination (dealer’s dock or territorial

warehouse). Customers must select a

standard delivery location for their

orders.

2. Docks at the selected delivery location

must be equipped to handle a 53′ trailer.

3. When a Krug territorial warehouse is

selected as the default delivery location,

it is understood that Krug pays freight

cost to the territorial warehouse only,

and no further. The Customer is

responsible for all charges from this

point.

4. Krug utilizes truck carriers that are

dedicated office furniture specialists.

5. For all deliveries, it is understood

that Krug or its agent is making a dock

delivery only (equipped to handle a 53′trailer), and any further work of truck

unloading, delivery beyond the dock,

installation, and removal of packaging is

not authorized or paid for by Krug.

6. Drop shipments to the installation site,

and timed deliveries, are available on

larger shipments (full truckloads or

slightly less) at no additional charge.

Drop shipments or timed deliveries for

smaller shipments may not be available,

or if available will require a surcharge.

Deliveries on an after hours basis, or on

weekends, or any other special

requirements, may be subject to a

surcharge. Location and contact

information, and the requested time of

delivery, is required at least one week

prior to the acknowledged shipment date.

If this information is not provided one

week in advance, or if the location or

time of the drop shipment is changed less

than one week in advance, a surcharge

may be applied, and/or the drop shipment

may not be scheduled.

7. For all deliveries - whether to the

Customer location or drop shipment - any

circumstances that result in the delay of

our carrier (including unsuitable

receiving facilities, or facilities not open

or available), service charges will be

applied at the rate of $75/hour. Where

re-delivery is necessary because of these

circumstances, the full cost of re-delivery

will be charged.

TestingAll management seating meets or

exceeds the testing requirements of

ANSI/BIFMA X5.5-1998. All lounge

seating meets or exceeds the testing

requirements of ANSI/BIFMA

FNAE-80-214A.

Customer SatisfactionIt is the primary goal of Krug and our

staff to ensure the complete satisfaction

of our customers with our products and

performance. If a problem arises with a

Krug product after the expiration of the

limited warranty period, Krug will

exercise its best efforts to achieve the

satisfaction of the customer in a manner

that is fair to all concerned.

Damaged ShipmentsAll Krug product is well engineered,

carefully inspected, and expertly loaded

onto our trucks at our Distribution

Center. If you receive any damaged

freight, we ask that you do not refuse the

shipment. Krug is not responsible for

damage to goods that occurs in transit or

storage. It is the purchaser and/or

receiver’s responsibility to examine the

goods upon receipt and to notify Krug of

any damages, overages or shortages. Any

discrepancies should be noted on the Bill

of Lading. The delivering carrier will not

accept responsibility for shortages or

damages if signed ‘‘clear.’’ Notification

of concealed damage claims must be

made to Krug Distribution within 5 days

of delivery, along with digital pictures if

available. All product and packaging

must be available for inspection. Krug

liability ceases after 5 business days and

Krug will not be responsible for

concealed damages if shipments are left

unopened. Krug is not responsible for the

condition of product that is stored or

installed in an environment where

temperature and humidity are not

controlled.

Field ProductReport AuthorizationKrug’s written authorization, in the form

of an FPR number, must be obtained

prior to incurring charges of any kind if

Krug is expected to pay these charges.

This includes authorization for field

repairs and replacements, installation

and delivery charges. Krug reserves the

right to have its representative inspect

product related to any request for such

authorizations, prior to thatUSA | 3

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

GENERAL INFORMATION

authorization being provided.

Deductions from invoices paid for any

charges to Krug, without prior written

authorization in the form of an FPR, will

not be accepted. Digital photographs may

be required to complete the FPR process.

ReturnsNo merchandise may be returned without

Krug’s prior written consent. In the event

of an authorized return, a Field Product

Report (FPR) number will be issued, and

a restocking charge will apply. Return

transportation charges must be prepaid.

Unauthorized returns will not be

accepted and will be returned freight

collect. All merchandise being returned

must be properly packaged in its original

or comparable replacement packaging to

ensure protection of the product during

handling and transportation. Returns on

orders duplicated by the customer must

be received in their original packaging to

be accepted.

Product being returned where Krug has

authorized its liability for replacement

or repair will be thoroughly inspected

on its return, and the results compared

to the reason for the return stated on the

FPR. Any discrepancies, such as

additional damage, signs of usage,

missing parts, etc., will result in an

adjustment to the amount of credit issued.

Custom CapabilitiesOver 15% of our orders involve some

type of custom work, and we invite our

customers to make use of our extensive

capabilities.

These include:

1) Dimensional customization of

standard size products

2) Custom finishes

3) For larger orders, completely

custom-designed products, as well

as non-standard wood species can

be specified.

Custom orders may require additional

production lead times. Contact Customer

Service for more information.

Care and MaintenanceWood FinishesAlthough Krug’s extensive finishing process

ensures a durable finish on all our products,

there are several steps that can be taken to

protect and prolong the life and beauty of the

finish. Dust only with a clean, dry cloth, going

with the grain. Clean any marks with a damp

cloth, using a small quantity of mild soap or

detergent.

Do not use any wax-based polish, spray or

silicone. Eventually, a film will build up and

discolor the top. Do not place your furniture in

a position of permanent exposure to direct

sunlight.

Frosted GlassKrug frosted glass doors, tabletops, modesty

panels and privacy screens are susceptible to

finger print grease residue when the frosted side

of the glass is touched. If possible wear latex

gloves when installing or moving frosted glass.

To clean simply wipe with an ammonia based

cleaner using a microfiber cloth. The key in

cleaning frosted glass is to clean the whole

inside surface so that it will appear uniform

with no streaking. Frosted glass is cleaned

basically the same way as regular glass but the

inside frosted surface may need to be wiped a

couple of times in order to get all of the

dirt/grease out of the fine pores.

LeatherLeather is a natural product and requires very

little care during use. Most stains can be

removed with a clean dry cloth. For stubborn

spots and stains, use a mild non-detergent

cleaner, rinse well and let air dry naturally. Do

not use saddle soap, cleaning solvents, furniture

polish, oils, varnish, abrasive cleaners, soaps or

ammonia waters.

Fabric UpholsteryProfessional upholstery cleaning is

recommended.

4 | USA

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

WOOD FINISHES

Wood Finishes & Occasional TablesStandard wood finishes are:

Appalachian CherryAmerican CherryImperial CherryMedium CherryNatural CherryStandard CherryLight OakHarvest OakMahoganyMellow OakEspressoRegular WalnutDark WalnutClear BeechMedium Anigre

Clear MapleHoney MapleWheat Maple

Wood is a natural product with inherent color variations that will never be fully mitigated by the

finishing process. Please anticipate variation in colors within a single unit, from piece to piece,

and from Krug wood finish samples. If a very close match is required, a sample must be provided

with the order and an upcharge will apply. Exact color matches are not possible.

Custom Wood FinishesAdd 10% list to your order for special finishes, minimum upcharge is $500 list per finish per

order. (For example, on all orders up to $5000 list an upcharge of $500 will apply, on orders

$5000 and up add 10% list to order.)

Special finish upcharges on seating products are calculated on a grade 1 value. For orders

with special finishes, a sample that is a minimum 3″ by 3″ must be received with the order.

Special finishes may add additional lead time to production schedules.

Since wood is a natural product, some variations in grain, color and stain acceptance will

occur. In our finishing processes, we try to minimize variations, but some variation between

samples and finished goods should be anticipated.

Dual FinishesAdd 10% list per item if specifying dual finish.

Standard Wood FinishesNo upcharge will be applied when specifying a finish available as standard on one species onto

maple seating and occasional tables. Clear finishes are not available on other species since

they are a clear finish on top of the natural veneer color.

USA | 5

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

FABRIC | LEATHER

Standard Fabric ProgramKrug Grade 1, 2 and 3 fabrics are also available on a cut yardage basis. Pricing is shown below. All prices are net, FOB Kitchener.

Grade 1 - $29/yard netPassport 20217

Safari 101Maize 201Mystic 801Willow 504Ruby 302Eclipse 402Asphalt 901

Grade 2 - $39/yard netManhattan 09513

Wisp 8012Spice 8000Sable 8007Olive 8005Pimento 8002Pacific 8006Obsidian 8010

Grade 3 - $49/yard netEllipse 08707

Flax 102Ginger 203Chocolate 702Lime 501Chili 304Navy 403Platinum 801

Motion 50020

Clay 105Straw 104Stone 801Cactus 507Garnet 308Midnight 401Gunmetal 806

Linia 50169

Tan 106Wheat 207Smoke 806Wintermoss 504Beaujolais 308Ocean 407Carbon 905

Luxura 20339

Malt 102Camel 201Espresso 703Pistachio 502Claret 301Atlantic 403Cinder 901

Sequence 50516

Sand 802Nutmeg 203Onyx 901Moss 502Cardinal 301Lapis 401Chestnut 701

Freestyle 50615

Fawn 101Honey 201Pewter 801Sage 501Crimson 301Twilight 401Raven 901

Transit 50302

Birch 103Buff 102Cocoa 702Mint 512Blaze 305Azure 405Shadow 804

Solo 50529

Jute 101Taupe 107Slate 801Fennel 503Paprika 308Gulf 401Ink 903

Matrix 04126

Steel 021Bronze 040Graphite 011Custard 022Pumpkin 050Cobalt 012Jet 015

Mirage 02386

Mist 2196Storm 2197Coffee 2198Forest 2191Flare 2188Thistle 2194Ebony 2199

Standard Leather ProgramGrade 8Espresso

Sand

Stone

Graphite

K13.8000

K13.5000

K13.3000

K13.4000

Port

Cobalt

Cypress

Onyx

K13.2000

K13.7000

K13.6000

K13.1000

Please contact Customer Service for specific information on leathers, available colors and lead times.

GREENGUARDMany Krug products have earned the GREENGUARD Environmental Institute’s GREENGUARD Certification for low emitting interior products. AllGREENGUARD Certified products and materials are tested regularly to ensure continued low emitting status.

Specifying and design professionals can trust GREENGUARD Certified products to create superior interior environments with out added cost or effort.All GREENGUARD Certified products can easily be found online in the GREENGUARD Product Guide. A printable certificate is available for eachproduct in the guide to simplify project submission and product verification.

For more information or to obtain an up-to-date listing of Krug’s GREENGUARD Indoor Air Quality Certified® products please visit www.krug.ca/ orwww.greenguard.org.

Krug Chairs that are GREENGUARD Certified:

• Me• Dorso• Dorso Weave• Pan Am• Modena• Cadence

• Rhythm• Start• Spin• Merit• Sierra• Kent

6 | USA

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CUSTOMER’S OWN MATERIAL - C.O.M.

Customer’s Own Material (COM)COM must be received three weeks prior to

the acknowledged ship date. Orders with

COM not received by the required deadline

will be delayed.

A description of the fabric, including

supplier name, pattern name, fabric name

and color number must be included with

the purchase order.

COM testing requires 3 business days and

samples are to be directed to Customer

Service. The customer has the option of

providing the COM before, at time of order,

or once the COM is received. If the

customer does not send a sample for

approval in advance of sending actual

material, Krug will not be responsible for

the cost of any fabric or other material

that it determines to be unsuitable for the

product or our process.

When the COM fabric is received at Krug,

it must be clearly identified with the fabric

name and color, and tagged with name of

the Krug customer and purchase order

number. Krug will inspect all COM fabric

when received to determine if it will be

suitable for upholstery. Where Krug feels

that the fabric or leather specified will

compromise the quality or integrity of our

products, customers will be contacted to

direct these concerns. Further, Krug

reserves the right to refuse to accept and

use any COM fabrics or leathers that will

compromise our products in any way that is

unacceptable to Krug. Krug cannot assume

responsibility for the durability or tailoring

quality of customer’s own material.

Yardage specified in this price guide is

approximate. In the case of multiple

product orders, multiply the number of

items by the COM yardage specified to

determine fabric required, unless otherwise

indicated. Additional yardage may be

needed if the material is less than 54″wide, or patterned or striped and requires

matching. All COMS are cut ‘‘up the roll’’

unless otherwise stated by the customer.

All striped fabrics will be applied vertically

unless otherwise stated by the customer

and after approval by Krug. Krug will not

be responsible for directional or positional

problems with its application of COM

material, unless it has been provided with

explicit instructions by the customer.

Special instructions should be sent to

Krug Customer Service, including a sample

(or photocopy) of the fabric. Krug is not

responsible for instructions sent with the

fabric rolls, or for the method of upholstery

if no instructions have been provided.

Price increases to COM acquired on the

customer’s behalf will be passed onto the

customer.

Application of Directional FabricsSome COM fabrics will be considered

directional by Krug that are not

considered directional by the fabric

supplier. All COMS are cut “up the roll”

unless otherwise stated by the customer

(please see below).

Cut across the Cut “up the roll”roll “railroad”

COM Shipping ProceduresFor seating COM Fabrics, please send

fabrics to:

Krug Inc.

111 Ahrens Street

Kitchener, Ontario

Canada N2H 4C2

Attention: RECEIVER

COM orders cannot be scheduled into

production until the fabric has arrived and

inspection is completed.

All packages must be clearly marked ″ForCustoms Clearance by Russell A. FarrowCustom Brokers″.

According to the North American Free

Trade Agreement (NAFTA), goods shipped

between the United States and Canada

can qualify for exemption from all duties,

or for a reduction in duties, if the goods

can be proven to originate in either the

United States, Canada or Mexico.

Canada Customs requires that a NAFTA

Certificate of Origin and a Commercial

Invoice be completed and sent with the

fabric shipment. The Commercial Invoice

must clearly state the description of the

fabric, the selling price, the make-up or

content, and the purchaser. The absence

of these two documents will delay the

shipments at the U.S./Canada border,

thereby potentially delaying the customer

order. If the total value of the shipment is

less than $1200 U.S., Customs will accept

a Low Value Statement of Origin in place

of the NAFTA Certificate of Origin. The

Low Value Statement must be signed by

a representative of the exporting company.

This statement may either be included on

the commercial invoice or attached to the

invoice. Krug is happy to answer any

questions or concerns about COM shipping

procedures and the required documents.

Please contact our Customs Specialist at

1.888.578.5784.

CAL 133California Technical Bulletin 133 is a

flammability test. Many Krug products, in

combination with some of our standard fabrics,

can be manufactured to meet the requirements

for certification to this test. A double upholstery

method is used, incorporating a fire-retardant

barrier that, in combination with fire retardant

foam, fire retardants in wood finishes, and

fabrics with some natural fiber content, may

pass the CAL 133 fire test.

An upcharge of $60 list per yard of

upholstery is applicable to incorporate

the elements listed above. The application

of this upcharge and the materials noted

does not certify that the specific

configuration of product and upholstery

is tested and officially certified. If actual

certification is required, a charge of

$500, plus the cost of the product to be

tested, is applicable. The testing process

requires at least several weeks of

additional lead time.

Krug assumes no responsibility for composite

testing or the certification of specific

configurations of product and upholstery to

the CAL 133 flammability test. Some

specific configurations of product and

upholstery have been tested. Please contact

Customer Service for more information.

USA | 7

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CUSTOMER’S OWN MATERIAL - C.O.M.

C.O.L. YardageTo calculate C.O.L. yardage required,

please use the following conversions

based on COM yardage:

Leather must be ordered in square

footage.

- 17 square feet in a yard

- Approx. 3 yards in a hide

- Approx. 51 square feet in a hide

- Please use grade 3 pricing for COL

Fabric Yardage CalculationTo calculate yardage required for COMand other non-standard fabric orders,please contact Krug Customer Service at1.888.578.5784.

Unless otherwise stated, fabric rolls areassumed to be a minimum 54′′ wide.Please use the guide below to calculatethe percentage of extra fabric required tocover large repeats.

The repeat is calculated by adding boththe vertical and horizontal measurementstogether and then referring to the chartfor extra yardage required.

FABRIC Plain2′′- 14′′Repeat

18′′- 19′′Repeat

20′′- 27′′Repeat

28′′- 36′′Repeat

54 0% 10% 15% 20% 25%

53-50 16% 20% 25% 30% 35%

48 16% 25% 30% 35% 40%

45 40% 50% 55% 60% 65%

36 50% 60% 65% 70% 75%

MAHARAM & MOMENTUM FABRICS

Krug has a co-operative program with

Maharam and Momentum Fabrics,

designed to provide a wide range of

fabric selections for our seating and

tackboard products.

When placing an order, a Krug customer

must specify the complete Maharam or

Momentum fabric number, along with the

appropriate Krug model number and

finish. Krug will supply the complete

product at the prices listed. Orders

specifying Maharam or Momentum

fabric cannot be cancelled once the fabric

has been ordered.

Fabric GradesTo determine the price of a product in

Maharam or Momentum fabrics, use the

reference lists on pages 9-10 to reference

the fabric grade (1-9).

Please contact Customer Service for

information on fabrics not listed. When

two fabrics are specified for use on

seating, the higher grade fabric price will

apply to the order.

Fabric SamplesIf you require additional samples or

memos for presentation, please contact

Maharam during business hours at:

1-800-7-SAMPLE (1.800.772.6753) in

Canada and in the United States, or

Momentum at 1-800-366-6839.

Flammability Standards• Tunnel Test Surface Ratings

Class A rating

• Class 1 UFAC

• Passes State of California Technical

Bulletin 117-Section E

Please contact Maharam or Momentum directly

for further flammability information pertaining

to specific Maharam or Momentum fabrics.

Special ConditionsAcknowledgements will give the

estimated delivery date of the finished

product. Some Maharam and Momentum

fabrics are imported, and availability

may affect estimated delivery time.

Maharam and Momentum reserve the

right to discontinue patterns or colors

from their program. For large projects,

please contact Maharam or Momentum

for availability of yardage.

8 | USA

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MAHARAM FABRICS

Fabrics are alphabetized within Grades.

Grade 3Consider 463850Marquee 463890Milestone 403901Order 463860

Grade 4Anecdote 458060Arbor 464240Article 458600Beckon 463570Betwixt 458770Boheme 458380Candid (V) 463720Flicker (V) 463730Gradient 463880Hush 459890Kilter 458090Lariat (V) 440401Ledger (P) 463770Medium 463490Messenger 458640Motive 458370Occasion 458070Perhaps 458390Quad 464700Reverie (V) 463740Setting 462520Single 464200Teeter 458080Trinket 459150Verdant 463110Whirl 463800

Grade 5AF24 462940AF43 462900AF79 462950AF96 459670Align 464080Alter 464880Before 464430Beguile 464110Bop 460002Dash 462720Defer 464250Division 464540Flucuate 464720Glimmer 464430Hop 462350Kernel 464050Meridian 464710

Pipa 459490Plexus 459500Pose (V) 460310Ranger 458690Skate 462370Squarely 464410Sudden (P) 463000Survey 464890Swerve 462530Trait 464830Vignette 461750Waterfront 461690Yanagi 459510

Grade 6Akimbo 464770Beside 464020Blossom 464870Boucle Stripe 464160Box 464790Briar 463640Calyx 463040Canopy 463910Cavort 464810Chance 464010Comment 462120Contact 464140Corner 464060Crush 464780Current 464730Dart 464040Decode 464800Diagram 461440Double Check 462080Figment 458590Floret 464070Fortis 403402Hint 463750Intertwine 460080Iota 462770Lore 461480Odalisque 459240Panache 460660Parlay 464150Rivet 462400Scene 464120Scout 405601Segment 462790Shimmy 460650Stroll 464740Symbol 463140Token 461760

Tonica 460850Treat 464510Undulating Stripe 462060Upright 464680Venn 464360Verse 464030Wildwood 405401

Grade 7Aria 459950Around 464420Balustrade 463120Binary 464230Blitz 462890Chenille Cord 407808Chenille Stitch 462050Cipher 463010Elapse 461990Flora 460750Groove 408501Level 462190Orissa 460340Perception 462740Sequence 408401Solace 704901Suggestion 459140Tinta 460790Tonus 460800Topas 460860

Grade 8Chenille Stripe 459820Divina 460730Divina Melange 460830Envelop 463620Even 464330Hallingdal 460760Magenta 460770Mega 462040Mix 464390Peep 464940Pictogram 459280Radiant 462500Salon 458670Tai 463790Tundra 460820Weimar 461980

Grade 9Bespoke Stripe 463540Blumen 462870Checker 459830

Checker Split 460290Chicago 465270China Shop 460610Circles 458310Coach Cloth 458950Coda 464480Crosspatch 458920Dandy 463550Design 464220Dot Pattern 458300Double Triangles 459840Epingle Stripe 462390Facets 459850Geometri 459970Gertrude 464530Glove 460840Gradual 463950Happy 465080Heaven 465070Interpose 464380Intricate 464960Jacobs Coat 462270Loop 464350Mikado 459330Millerstripe 462250Names 462510Optik 459960Orakelblume 463900Pavement 459740Plural 463630Prince 465060Princess 465050Quatrefoil 459340Queue 464400Repeat Classic

Houndstooth 462180Repeat Classic Stripe 462170Repeat Dot Pixel 462140Repeat Dot Ring 462150Satu 461800Sea Things 464590Small Dot Pattern 458320Spring 460500Toostripe 462260Unisol 461160Velvet Stitch 463970Voyage 456801Wicker 460360

Maharam fabrics are considered COM and are available on KrugExpress once fabric is received. Express leadtime will be based on date the fabric isreceived at Krug.(V) Vinyl upholstery, (P) Polyurethane, not suitable for tackboard application.For additional fabrics not shown here, please visit the Maharam website at www.maharam.com.Please contact Krug Customer Service for ordering information on unlisted fabrics.Maharam reserves the right to discontinue fabric at their own discretion and Krug is not responsible for the discontinuation of these fabrics.

USA | 9

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MOMENTUM FABRICS

Fabrics are alphabetized within Grades.

Grade 1Universe* (Panel)Meander* (Panel)

Grade 2Agora (V)Cashmere* (V)ChatCheersClicheEntrophyFactorInterval*JinxLeafletMerryMultiplicityNetwork OodleOpticsProdigyPuckerSnazzySpellboundSublimeSwoonTatamiVibe

Grade 3AccoladeAdageBaileyBravo (V)Cachet*CamelotCrete (V)DreameryEntourage

EnviroFlauntFleck (V)FrankGeminiGigGlam (V)GumptionIntermixIsmJuicyLogicLustre (V)Mercury (V)NexusNovoOlympus (V)ParityParkerPrompt*RacerReboundRelicSaucySavannahSensationSequelSimplexSpenceSpirit II (V)StreamlineTeaseTekThesisVerbatim

Grade 4AxiomBanderoleBreeChiDwellElanEssentiaGabeIncognitoLuxeMemoirMorpheMottoNostalgiaPoiseQuantumQuestRendezvousRenditionRevueRingo*ShiftYoshe

Grade 5AcaciaAnaisAzmiBaxterBurstDetourEchelon*HypeIdiomJammin

JayJensenMaraMediaMelangeModPearceProxyRaveReady Set GoRemySolanoSpangleSprocketTranceportVitaWhirlwindZen

Grade 6AltroCirqueClaytonCliqueCynicEnigmaLineaQuadQuadretti

Grade 7Linq

Momentum fabrics marked with an * are regularly stocked and available on KrugExpress.For additional fabrics not shown here, please visit the Momentum website at www.themomgroup.com.Momentum grade 1 panel fabrics are to be specified for all tackboard applications.Please contact Krug Customer Service for ordering information on unlisted fabrics.Momentum reserves the right to discontinue fabrics at their own discretion. Krug is not responsible for the discontinuation of these fabrics.

10 | USA

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BASE STYLES

Base Styles Description Available On

Black Nylon 5 blade glass reinforced molded nylon base with 2 1/4′′hooded dual wheel casters.

Me (pg. 16)Dorso (pg. 39)Modena (pg. 53)Cadence (pg. 57)Rhythm (pg. 64)

Start (pg. 67)Spin (pg. 71)Merit (pg. 75)Sierra (pg. 76)Kent (pg. 80)

Polished Aluminum 5 blade polished cast aluminum base with 2 1/4′′ dualwheelcasters (upcharge of $100 applies).

Me (pg. 16)Pan Am (pg. 47)Rhythm (pg. 64)

Seat Slider Seat slider mechanism featuring a 2′′ range ofadjustment front to back when seated. The lever toactivate this feature is located under the seat of theuser’s left side and is activated by a simple twist of theknob.

Me (pg. 16)Dorso E (pg. 24)Dorso T (pg. 24)Dorso Weave (pg. 33)

Dorso (pg. 39)Cadence (pg. 57)Spin (pg. 71)

Wood 5 blade steel bar stock base with finished wood capsand 2′′ black hooded dual wheel casters.

Cadence (pg. 57)Sierra (pg. 76)Kent (pg. 80)

Wood & Brass 5 blade steel bar stock base with antique brass capsand 2 1/4′′ antique brass hooded casters.

Churchill (pg. 79)

Chrome 5 blade polished chrome base with 2 1/4′′ dual wheelcasters.

Dorso (pg. 39)

Jury Bases Jury Base assembly consists of a black 9′′ diameterconical/cast base for permanently mounting a chair tothe floor. Into the base is inserted a black pneaumaticgas cylinder with self returning action from rotation,and self returning height feature when exiting thechair. Allows for full 360 degree rotation. Limiteddegrees of rotation are not available.

Me (pg. 16)Dorso Weave (pg. 33)Dorso (pg. 39)Pan Am (pg. 47)Modena (pg. 53)Cadence (pg. 57)

Rhythm (pg. 64)Spin (pg. 71)Merit (pg. 75)Sierra (pg. 76)Kent (pg. 80)Bank of England (pg. 111)

Jury Bases

MeMTH1-L2-11J

Dorso WeaveDOS1-H2211J

DorsoDOS1-H2011J

Pan AmPAN1-M11J

ModenaMOD1-H11J

CadenceCAD1-HW12J

Rhythm90-HBJ

SpinSPI1-H211J

Merit80-OAJ

Sierra11-HBJ

Kent649-HBJ

Bank of England177-J178-J179-J

USA | 11

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BASE STYLES

Metal FinishesFollowing is a list of products and their respective metal finishes. Other painted finishes are available through special request at

order quantity minimums. Specific upcharges will apply and extra lead time will be required. Please see specific product sections

for details on upcharges and order quantity minimums. Please note that the description of silver metallic does not mean that all finishes with this

description are an exact match. Some variation from product to product will occur. Standard metal finishes are:

Metal Available On Metal Available On Metal Available On

Polished Chrome Bali (pg. 88, 104)Can Can (pg. 105)Thelma (pg. 109)Louise (pg. 110)

Silver Metallic

*Carlylefeatures ametallic finish

Capri (pg. 107)Sutton (pg. 118)Sera (pg. 119)Studio (pg. 122)Studio Task (pg. 123)

*Carlyle seating (pg. 121, 124)Sloane (pg. 125)Sutton (pg. 134)Sera (pg. 135)Virtu (pg. 136)Prado (pg. 143)Mondrian (pg. 144)

*Carlyle tables (pg. 145)Rathburn (pg. 146)Dorso (pg. 39)Me (pg. 16)

Matte Black Start guest seating(pg. 67)Rathburn (pg. 146)

12 | USA

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

LAMINATES

LAMINATE WORKSURFACES

Krug has worked with several laminate suppliers that are suitable for Krug occasional tables. Most laminate suppliers stock a multitude ofcolors and patterns.

For specific lead time and application questions, please contact Krug Customer Service for your requirement.

Laminates are offered on Krug occasional tables at a 10% upcharge.

The following laminates are acceptable for application on Krug products as they feature a matte finish:

Nevamar All laminates with ‘‘T’’ in the suffix (i.e., MR2002T)

Wilsonart All laminates with ‘‘60’’ in the suffix (i.e., 4779-60)

Arborite All laminates with ‘‘CA’’ in the suffix (i.e., 1531-CA)

Pionite All laminates with ‘‘Suede’’ in the name (i.e., WW561 Suede)

Formica All laminates with ‘‘58’’ in the suffix (i.e., 756-58)

Additional laminate codes may be acceptable for use on Krug furniture, however, they could be subject to an additional upcharge or extended leadtime due to material complexity.

High sheen laminates are not acceptable for application on Krug furniture due to their inherent nature of scratching and marring during theproduction process.

For added convenience, the following laminates provide a close match to Krug’s standard wood finishes and are stocked by the supplier.Laminate samples should be obtained from the laminate supplier, to insure a satisfactory color match before placing an order. Krug does notguarantee an exact finish match to laminates listed below.

Krug Finish Pattern Name and Number Laminate SupplierMellow Oak English Oak 7885T-60 Wilsonart

Clear Maple Kensington Maple 10776-60 Wilsonart

Honey Maple Gold Speckle Maple 1521-CA Arborite

Appalachian Cherry Figured Mahogany 7040A-60 Wilsonart

American Cherry Cherry Jubilee W-414-CA Arborite

Regular Walnut Windsor Mahogany 7039-60 Wilsonart

Currently, laminates are not offered on Krug Express. In the near future we will be introducing a stocked laminate program to offer selectedlaminates on Krug Express. Please contact Customer Service for additional information.

Arborite Laminates 1.800.361.8712 Wilsonart Laminates 1.800.433.3222

USA | 13

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

KRUG EXPRESS

PROGRAM DETAILS

KrugExpress orders are ready to ship by the dateacknowledged. Delivery and shipping schedules may result inactual shipping of orders at a later date. Statutory holidaysand scheduled factory vacations may add to acknowledgedlead times of KrugExpress orders. Unless otherwisespecified on the order, the customer’s standard method ofshipping Krug products will be utilized.

Available factory capacity for KrugExpress is filled by ordersreceived on a ‘‘first come, first serve’’ basis. If the normalKrugExpress lead time is not available for your order becauseavailable capacity has been filled, you will be immediatelyadvised of the earliest available ready-to-ship date. Pleaseconsult your Customer Service representative in advance ifyou wish to confirm the specific lead time availability for aKrugExpress order.

Orders must be received by midnight of a given day for thatday to be considered the official day the order is received.Order lead times are acknowledged from the date the orderis received, but not including the date the order is received.

KrugExpress orders must be ‘‘clean’’ when received inorder to be considered officially received on a given day,and lead times will be acknowledged from the date ordersare determined to be ‘‘clean’’.

Changes to KrugExpress orders are not allowed under anycircumstances.

Orders for product on KrugExpress must clearly state:‘‘KrugExpress’’.

SEATING & OCCASIONAL TABLES PROGRAMOrders for seating products on the KrugExpress programmay be subject to quantity maximums. Please contact KrugCustomer Service for more information.

Quantity maximums are dependent upon available capacity,in order to insure that we ship all orders on time.

Only standard wood finishes are available for KrugExpressorders. Laminates are not available on KrugExpress.

KrugExpress includes all Krug seating and occasionaltables as well as Krug conference and casegoods productsto complement this seating offering.

The KrugExpress logo at the top of a price guide pageindicates that the items on the page are available onKrugExpress, unless noted otherwise.

Maharam and Momentum are available on KrugExpress.*Some conditions apply.

14 | USA

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MANAGEMENT & TASK SEATING

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Me | INTRODUCTION

Me brings new meaning to custom seating. Your comfort. Your style. Your chair.

With Me, options, styling and versatility are virtually endless, and comfort is superior. With Me, Krug has created a chair that not onlyprovides unprecedented comfort and natural posture support, but also exceptional styling. Me is an adaptable seating solution for anymanagement, task and conference environment.

Think of Me as your fingerprint on seating. The search for the perfect chair is over. Me is here.

DIMENSIONS & COM REQUIREMENTS

Overall Overall Overall Height of Width Seat Shipping Cube COMWidth Depth Height Arms from Floor between Arms Depth Weight Yardage

LOW BACK Armless 20 21.75 36.5 n/a n/a 19 39 16 1.7Fixed 23 21.75 36.5 27.13 19 19 46 16 1.7Adjustable Urethane 24.75 21.75 36.5 24 17.25 19 46 16 1.7Adjustable Upholstered 25.5 21.75 36.5 24.25 16.75 19 46 16 1.7

MID BACK Armless 20 21.75 39 n/a n/a 19 43 18 1.8Fixed 23 21.75 39 27.13 19 19 48 18 1.8Adjustable Urethane 24.75 21.75 39 24 17.25 19 48 18 1.8Adjustable Upholstered 25.5 21.75 39 24.25 16.75 19 48 18 1.8

HIGH BACK Armless 20 21.75 41.6 n/a n/a 19 45 20 1.9Fixed 23 21.75 41.6 27.13 19 19 50 20 1.9Adjustable Urethane 24.75 21.75 41.6 24 17.25 19 50 20 1.9Adjustable Upholstered 25.5 21.75 41.6 24.25 16.75 19 50 20 1.9

Height measurements of Me are taken with the pneumatic lift in the lowest position and with a standard height range gas lift. Alldimensions are in inches and approximate and are subject to change without notice. Contact Customer Service if dimensions are critical.

OPTIONAL GAS LIFT HEIGHT RANGESMe is available with two gas lift ranges. Unless clearly specified on order, Me seating will be provided with the standard gas lift.The gas lift ranges measured from the seat height are as follows:Non Seat Slider Versions: Standard gas lifts give a seat height of no greater than 16′′ when lowered and no less than 20′′ when extended. Low gas liftsgive a seat height of no greater than 15 1/8′′ when lowered and no less than 18 5/16′′ when extended. If dimensions are critical, please contactCustomer Service.Seat Slider Versions: Standard gas lifts give a seat height of no greater than 16 1/4′′ when lowered and no less than 20 5/16′′ when extended. Low gaslifts give a seat height of no greater than 15 3/8′′ when lowered and no less than 18 15/16′′ when extended. If dimensions are critical, please contactCustomer Service.

Note: Some vinyls are not suitable for upholstery on Me seating. For vinyls other than Maharam’s Lariat, or Momentum’s Cashmere, please submit asample to Customer Service.The approval process is as follows:1. A sample of the COM vinyl fabric must be provided to Krug Customer Service prior to or at time of order. For Maharam or Momentum fabric, Krugwill obtain the fabric sample.

2. The sample will be reviewed and the customer advised if the fabric is unsuitable.3. The COM vinyl will be inspected when received at the factory to identify any further concerns with its suitability.

Me | LOW BACK Me | MID BACK Me | HIGH BACK

16 | USA MANAGEMENT & TASK SEATING

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Me | FEATURES

ARM STYLES

Four arm styles are available on Me.In addition to the armless version isa urethane overmolded steelsupported fixed cantilever arm. Alsoavailable are two adjustable padarms: urethane pad arms, andupholstered pad arms. Bothadjustable arm versions feature:pivoting arms that adjust 30 degreesinward or outward, 1 1/2″ left andright width adjustment control, anda 6 stop position arm height rangewith a total of 2.6″ of heightadjustment.

When specifying leather on theupholstered arm pad version, theuser has the option of a perforatedarm pad (available when specifyingKrug’s in stock leather only).

When specifying polished aluminumbases on Me, the arm upright willalso be finished in polishedaluminum (on adjustable armversions only).

BASE STYLES

Me seating is available in two baseoptions. Choose from an injectionmolded, glass reinforced black nylonbase, or polished cast aluminumbase, both with 2 1/4″ dual wheelcasters.

Me CONTROLS

Me features a standard synchro tiltmechanism that allows the back andthe seat to articulate synchronouslyin a 2:1 ratio. This feature insuresthat the upward tilt of the seat isminimized as the back reclines. Themechanism also features a standardtilt lock mechanism that allows theuser an infinite number of reclinelock positions. Simply push the tiltlock lever downward to lock andupward to free-float the back.

SEAT HEIGHT

In the seated position, a pullupwards on the height adjustmentlever located under the seat of theuser’s right side adjusts the heightup or down with a total heightrange of:Standard gas lift: 4.25′′ without seatslider and 4.0′′ with seat slider.Low gas lift: 3.5″ without seat sliderand 3.5″ with seat slider.

BACK TENSION

The back tension adjustment knob islocated on the front underside of theseat. A simple turn of the knobprovides a range of back tensionadjustment suitable for users ofvarying sizes and preferences.

SEAT SLIDER

All Me adjustable arm versions areavailable with an optional seat slidermechanism featuring a 2″ range ofadjustment front to back whenseated. The lever to activate thisfeature is located under the seat ofthe user’s left side and is activatedby a simple twist of the knob.

BACK HEIGHT

Me is available in three backheights: low, mid and high.

Back height adjustment is astandard feature on all Me models.This feature offers an adjustmentrange of 11 positions over a 2 1/2″range of movement. Back heightadjustment is operated while in theseated position, by placing the righthand on the right bottom of the chairback, and the left hand on the leftbottom of the chair back. The backis lifted and clicked into the desiredheight. Raising the back to thehighest position releases the backheight lock so it can be lowered tothe first and lowest stop position.

UPHOLSTERY OPTIONS

With Me comes the ability to choosecontrasting fabrics/leathers for theseat, upper and lower back sections,as well as the upholstered arm pads.This option allows for an endlesspossibility of custom designedseating options (see upcharges onthe following pages).

When specifying leather from Krug’sin-stock leather program, the optionto perforate the leather on the lowerback and upholstered pad arms isavailable (see pricing on thefollowing pages).

MANAGEMENT & TASK SEATING USA | 17

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Me | LOW BACK

COM COL FABRIC GRADES LEATHER

DESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9

FIXED ARMS

MTH1 L2 11B 791 833 863 979 1035 1084 1175 1368 1531

Standard back upholstery, black base

MTH1 L2 21B 1478

Perforated back upholstery, black base

MTH1 L2 11A 870 912 948 1064 1119 1162 1252 1454 1617

Standard back upholstery, silver metallic base

MTH1 L2 21A 1563

Perforated back upholstery, silver metallic base

ADJUSTABLE URETHANE PAD ARMS

MTH1 L2 12B 767 802 840 935 998 1040 1131 1314 1483


MTH1 L2 22B 1424


MTH1 L2 12A 852 881 918 1022 1084 1126 1209 1399 1569


MTH1 L2 22A 1509


CONTRASTING SEAT, BACK AND ARM PAD FABRICCOM yardage requirements are shown below. The base price is determined using the higher grade fabric. Please note clearly on purchase order whichchair sections to upholster by using the chart below.

COM REQUIREMENTS PER CHAIR SECTIONUpper Back* Lower Back* Seat Arm Pads

0.7 0.5 0.75 0.4

Measurements above are provided in yards.*Upper and Lower Backs consist of both the inside and outside back.

ORDERING NOTESThe perforated leather option is not available on the KrugExpress program.Perforated leather option is only available with the Krug in stock leather program.Please specify clearly on purchase order if low gas lift is to be applied.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.Value Mechanism Option - for a price reduction of $100 per chair, we offer a lower-function mechanism option, which includes full swiveland rearward tilt capability, tilt tension control, and gas lift height adjustment activator.

PRODUCT CODE KEYLine Series Back Style Back Adjustment Back Details Arm Style Base

MTH 1 L 2 1 0 BMe Management, Task

& Conference SeatingLow Back Adjustable Standard Back

UpholsteryArmless Black Base

M 2 1 AMid Back Perforated Back

UpholsteryFixed Cantilever Silver Metallic Base

H 2 JHigh Back Adjustable Urethane Pad Arms Jury Base

3Adjustable Upholstered Pad Arms


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Me | LOW BACK



UPHOLSTERED ADJUSTABLE PAD ARMS

MTH1 L2 13B 802 840 881 984 1046 1094 1180 1380 1563


MTH1 L2 23B 1490


MTH1 L2 13A 888 918 961 1070 1131 1180 1264 1459 1642


MTH1 L2 23A 1569


ARMLESS

MTH1 L2 10B 717 761 796 912 961 1009 1100 1301 1459


MTH1 L2 20B 1410


MTH1 L2 10A 810 846 876 991 1046 1089 1180 1380 1545


MTH1 L2 20A 1490


Me | MID BACKFIXED ARMS

MTH1 M2 11B 852 893 931 1052 1114 1162 1258 1472 1648


MTH1 M2 21B 1582


MTH1 M2 11A 931 973 1016 1131 1193 1242 1343 1557 1727


MTH1 M2 21A 1667


ORDERING NOTESThe perforated leather option is not available on the KrugExpress program.Perforated leather option is only available with the Krug in stock leather program.Please specify clearly on purchase order if low gas lift is to be applied.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.Value Mechanism Option - for a price reduction of $100 per chair, we offer a lower-function mechanism option, which includes full swiveland rearward tilt capability, tilt tension control, and gas lift height adjustment activator.










EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Me | MID BACK




MTH1 M2 12B 821 863 901 1009 1070 1119 1209 1410 1593


MTH1 M2 22B 1521


MTH1 M2 12A 906 943 979 1094 1155 1205 1289 1496 1678


MTH1 M2 22A 1606



MTH1 M2 13B 863 906 943 1059 1131 1175 1272 1483 1678


MTH1 M2 23B 1593


MTH1 M2 13A 948 984 1022 1137 1209 1252 1350 1569 1756


MTH1 M2 23A 1678


ARMLESS

MTH1 M2 10B 772 815 852 973 1035 1084 1180 1399 1569


MTH1 M2 20B 1509


MTH1 M2 10A 852 901 935 1059 1119 1167 1264 1478 1654


MTH1 M2 20A 1588

Perforated back upholstery, silver metallic baseORDERING NOTESThe perforated leather option is not available on the KrugExpress program.Perforated leather option is only available with the Krug in stock leather program.Please specify clearly on purchase order if low gas lift is to be applied.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.Value Mechanism Option - for a price reduction of $100 per chair, we offer a lower-function mechanism option, which includes full swiveland rearward tilt capability, tilt tension control, and gas lift height adjustment activator.










EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Me | HIGH BACK



FIXED ARMS

MTH1 H2 11B 925 979 1022 1162 1229 1284 1399 1636 1831


MTH1 H2 21B 1746


MTH1 H2 11A 1009 1064 1106 1235 1309 1363 1478 1722 1910


MTH1 H2 21A 1831



MTH1 H2 12B 893 943 984 1114 1180 1235 1343 1575 1769


MTH1 H2 22B 1690


MTH1 H2 12A 973 1022 1070 1193 1264 1314 1424 1661 1848


MTH1 H2 22A 1769



MTH1 H2 13B 935 991 1035 1167 1242 1289 1410 1654 1856


MTH1 H2 23B 1764


MTH1 H2 13A 1022 1070 1119 1247 1326 1375 1490 1740 1940


MTH1 H2 23A 1848

Perforated back upholstery, silver metallic baseORDERING NOTESThe perforated leather option is not available on the KrugExpress program.Perforated leather option is only available with the Krug in stock leather program.Please specify clearly on purchase order if low gas lift is to be applied.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.Value Mechanism Option - for a price reduction of $100 per chair, we offer a lower-function mechanism option, which includes full swiveland rearward tilt capability, tilt tension control, and gas lift height adjustment activator.










EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO | E

Dorso E features a generous seat & back that provides unparalleled comfort and support.


Overall Overall Overall Seat Height Height of Width Height Seat Shipping Cube COMModel Number Width Depth Height Min/Max Arms from Floor between Arms Range Depth Weight Yardage

DEC1-HB/DES1-HB/ Fixed 25.25 25 50 17.5–22.125 25.6875–30.25 21 47–52 18 44 19 2.2DEB1-HB Fixed Upholstered 25.5 25 50 17.5–22.125 26.6875–31.25 20.5 47–52 18 44 19 2.2

Adjustable 25.5 25 50 17.5–22.125 26–34 21 47–52 18 44 19 2.2Armless 20.5 25 50 17.5–22.125 N/A N/A 47–52 18 40 19 2.2

DEC1-MB/DES1-MB Fixed 25.25 25 43 17.5–22.125 25.6875–30.25 21 40–45 18 41 16 2DEB1-MB Fixed Upholstered 25.5 25 43 17.5–22.125 26.6875–31.25 20.5 40–45 18 41 16 2

Adjustable 25.5 25 43 17.5–22.125 26–34 21 40–45 18 41 16 2Armless 20.5 25 43 17.5–22.125 N/A N/A 40–45 18 37 16 2

Note: Some vinyls, leathers and upholsteries are not suitable for application on Dorso seating.For vinyls other than Maharam’s Lariat, or Momentum’s Cashmere please submit a sample to Customer Service for a pre-approvalprocess at time of order.

The pre-approval process is as follows:

1. A sample of the COM must be provided to Krug Customer Service prior to or at time of order.For Maharam fabric, Krug will obtain the fabric sample.

2. The sample will be reviewed, and the customer advised if the fabric is unsuitable.

3. The COM fabric or leather itself will be inspected when received at the factory, to identify any furtherconcerns with its suitability.

DORSO | E-LINE

OPTIONS

Height measurements of Dorso E are taken with the pneumatic lift in the lowest position.All dimensions are in inches and approximate and are subject to change without notice.Contact Customer Service if dimensions are critical.

FEATURES

For a complete listing of features please see page 24 in the Seating and Occasional Tables price guide.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO | T

Dorso T; a strikingly modern chair design, provides a level of long term sitting comfort and support.


Overall Overall Overall Seat Height Height of Width Height Seat Shipping Cube Seat COMModel Number Width Depth Height Min/Max Arms from Floor between Arms Range Depth Weight Yardage

DTC1-HB/DTS1-HB/ Fixed 25.25 25 49 16.75–21.375 25.6875–30.25 20 46–51 18 44 19 2Adjustable 25.5 25 49 16.75–21.375 26–34 20 46–51 18 44 19 2Armless 20.5 25 49 16.75–21.375 N/A N/A 46–51 18 40 19 2

DTB1-HB Fixed 25.25 25 49 16.75–21.375 25.6875–30.25 20 46–51 18 44 19 2Adjustable 25.5 25 49 16.75–21.375 26–34 20 46–51 18 44 19 2Armless 20.5 25 49 16.75–21.375 N/A N/A 46–51 18 37 19 2

DTC1-MB/DTS1-MB Fixed 25.25 25 42 16.75–21.375 25.6875–30.25 20 39–44 18 41 16 1.8DTB1-MB Adjustable 25.5 25 42 16.75–21.375 26–34 20 39–44 18 41 16 1.8

Armless 20.5 25 42 16.75–21.375 N/A N/A 39–44 18 37 16 1.8

Note: Some vinyls, leathers and upholsteries are not suitable for application on Dorso T seating.For vinyls other than Maharam’s Lariat, or Momentum’s Cashmere please submit a sample to Customer Service for a pre-approvalprocess at time of order.

The pre-approval process is as follows:

1. A sample of the COM must be provided to Krug Customer Service prior to or at time of order.For Maharam fabric, Krug will obtain the fabric sample.

2. The sample will be reviewed, and the customer advised if the fabric is unsuitable.

3. The COM fabric or leather itself will be inspected when received at the factory, to identify any furtherconcerns with its suitability.

DORSO | T-LINE

OPTIONS

Height measurements of Dorso T are taken with the pneumatic lift in the lowest position.All dimensions are in inches and approximate and are subject to change without notice.Contact Customer Service if dimensions are critical.

FEATURES

For a complete listing of features please see page 24 in the Seating and Occasional Tables price guide.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO E & T | FEATURES

ARM STYLES

Optional fixed cantilever or anadjustable black arm constructed ofdie cast metal with textured plasticarm pads. The adjustable armsfeature seven height adjustmentpositions, with a total adjustmentrange of 2.75″. All Dorso models arealso available in armless versions.

E-LINEFixed cantilever and adjustable armsare available in Black, SilverMetallic or Polished Chrome accentfinishes to match metal base. Thefixed arm is also available in blacktextured plastic and upholsteredfabric/leather version.

T-LINEFixed cantilever and adjustable armsare available in black texturedplastic.

BASE STYLES

E-LINE & T-LINEDorso seating features optionalSilver Metallic, Polished Chromeor Black finish and dual wheelcasters.

DORSO - CONTROLS

All Dorso E-Line and T-Linecome with a Synchro tilt mechanism.The tilt adjustment range offers fiverecline-lock positions, as well as freeflowing movement. The forwardpivot of the mechanism allows theback and the seat to articulatesynchronously in a 2:1 ratio, so thatupward tilt of the seat is minimizedas the back reclines.

SEAT HEIGHT

In the seated position, a pullupwards on the height adjustmentlever located under the seat of theuser’s right side adjusts the heightup or down with a total height rangeof 4.5″.

BACK TENSION

Back tension on the mechanism iscontrolled with an adjustment knobunder the seat. It has been designedto provide a range of back tensionadjustment suitable for users ofvarying sizes and preferences.

SEAT SLIDER

All Dorso tilters are available withan optional seat slider mechanismfeaturing a 2″ range of adjustmentfront to back when seated. The leverto activate this feature is locatedunder the seat of the user’s rightside and is activated by an upwardpull of the lever.

BACK HEIGHT

Back height adjustment is anoption on Dorso E & T Line.It offers an adjustment range of11 positions, over a 2″ range ofmovement. Back height adjustmentis operated while in the seatedposition, by placing the right handon the right bottom of the chairback, and the left hand on the leftbottom of the chair back. The backis lifted and clicked into the desiredheight. Raising the back to thehighest position releases the backheight lock so it can be lowered.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO E-LINE | MID BACK



Fixed Back; Fixed Arms - Synchro

DEC1-M111C 910 952 993 1048 1112 1183 1271 1366 1472

DES1-M111S 870 910 951 1004 1069 1147 1229 1324 1429

DEB1-M111B 760 800 841 894 959 1037 1119 1214 1319

Fixed Back; Fixed Arms - Synchro/Seat Slider

DEC1-M112C 960 1002 1043 1098 1162 1233 1321 1416 1522

DES1-M112S 920 960 1001 1054 1119 1197 1279 1374 1479

DEB1-M112B 810 850 891 944 1009 1087 1169 1264 1369

Fixed Back; Adjustable Arms - Synchro

DEC1-M121C 1040 1080 1122 1176 1241 1311 1399 1494 1601

DES1-M121S 970 1014 1054 1107 1172 1242 1331 1426 1532

DEB1-M121B 860 900 941 994 1059 1137 1219 1314 1419

Fixed Back; Adjustable Arms - Synchro/Seat Slider

DEC1-M122C 1090 1130 1172 1226 1291 1361 1449 1544 1651

DES1-M122S 1020 1064 1104 1157 1222 1292 1381 1476 1582

DEB1-M122B 910 950 991 1044 1109 1187 1269 1364 1469

Fixed Back; Fixed (Leather/Fabric Wrap) Arms - Synchro

DEC1-M131C 1050 1097 1143 1203 1272 1348 1441 1550 1656

DES1-M131S 1010 1055 1101 1159 1229 1312 1399 1508 1613

Fixed Back; Fixed Arms (Leather/Fabric Wrap)- Synchro/Seat Slider

DEC1-M132C 1100 1147 1193 1253 1322 1398 1491 1600 1706

DES1-M132S 1060 1105 1151 1209 1279 1362 1499 1558 1663

Fixed Back; Armless - Synchro

DEC1-M101C 850 892 933 986 1051 1129 1211 1306 1412

DES1-M101S 770 811 853 905 971 1047 1129 1225 1330

DES1-M101B 725 766 808 860 926 1002 1084 1180 1285

Fixed Back; Armless - Synchro/Seat Slider

DEC1-M102C 900 942 983 1036 1101 1179 1261 1356 1462

DES1-M102S 820 861 903 955 1021 1097 1179 1275 1380

DEB1-M102B 775 816 858 910 976 1052 1134 1230 1335

Each chair features the Synchro Tilt mechanism

*The finish applies to exposed metal elements specified for the chair: chair base, fixed and adjustable arm accents.

ORDERING NOTESThe upholstered cantilever arm is available for use with leather and upholstery in the polished chrome and silver metal arm only.

PRODUCT CODE KEYLine Series Back Style Back Adjustment Arm Style Mechanism Base

DEC 1 M 1 0 1 CDorso E-Line

(Polished Chrome)Management, Task

& Conference SeatingMid Back Fixed Armless Synchro Chrome Base

DES H 2 1 2 SDorso E-Line

(Silver Metallic)High Back Adjustable Fixed Cantilever Synchro /

Seat SliderSilver Metallic

Base

DEB 2 BDorso E-Line

(Black)Adjustable Black Base

3Fixed Cantilever (Upholstered)


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO E-LINE | MID BACK



Adjustable Back; Fixed Arms - Synchro

DEC1-M211C 930 972 1013 1068 1132 1203 1291 1386 1492

DES1-M211S 890 930 971 1024 1089 1167 1249 1344 1449

DEB1-M211B 780 820 861 914 979 1057 1139 1234 1339

Adjustable Back; Fixed Arms - Synchro/Seat Slider

DEC1-M212C 980 1022 1063 1118 1182 1253 1341 1436 1542

DES1-M212S 940 980 1021 1074 1139 1217 1299 1394 1499

DEB1-M212B 830 870 911 964 1029 1107 1189 1284 1389

Adjustable Back; Adjustable Arms - Synchro

DEC1-M221C 1060 1100 1142 1196 1261 1331 1419 1514 1621

DES1-M221S 990 1034 1074 1127 1192 1262 1351 1446 1552

DEB1-M221B 880 920 961 1014 1079 1157 1239 1334 1439

Adjustable Back; Adjustable Arms - Synchro/Seat Slider

DEC1-M222C 1110 1150 1192 1246 1311 1381 1469 1564 1671

DES1-M222S 1040 1084 1124 1177 1242 1312 1401 1496 1602

DEB1-M222B 930 970 1011 1064 1129 1207 1289 1384 1489

Adjustable Back; Fixed (Leather/Fabric Wrap) Arms - Synchro

DEC1-M231C 1070 1117 1163 1223 1292 1368 1461 1570 1676

DES1-M231S 1030 1075 1121 1179 1249 1332 1419 1528 1633

Adjustable Back; Fixed (Leather/Fabric Wrap) Arms - Synchro/Seat Slider

DEC1-M232C 1120 1167 1213 1273 1342 1418 1511 1620 1726

DES1-M232S 1080 1125 1171 1229 1299 1382 1469 1578 1683

Adjustable Back; Armless - Synchro

DEC1-M201C 870 912 953 1006 1071 1149 1231 1326 1432

DES1-M201S 790 831 873 925 991 1067 1149 1245 1350

DES1-M201B 745 786 828 880 946 1022 1104 1200 1305

Adjustable Back; Armless - Synchro/Seat Slider

DEC1-M202C 920 962 1003 1056 1121 1199 1281 1376 1482

DES1-M202S 840 881 923 975 1041 1117 1199 1295 1400

DEB1-M202B 795 836 878 930 996 1072 1154 1250 1355











Base

DEB 2 BDorso E-Line




EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO E-LINE | HIGH BACK




DEC1-H111C 940 992 1047 1118 1201 1302 1420 1555 1702

DES1-H111S 900 951 1006 1077 1159 1259 1379 1513 1661

DEB1-H111B 780 831 886 957 1039 1139 1259 1393 1541


DEC1-H112C 990 1042 1097 1168 1251 1352 1470 1605 1752

DES1-H112S 950 1001 1056 1127 1209 1309 1429 1563 1711

DEB1-H112B 830 881 936 1007 1089 1189 1309 1443 1591


DEC1-H121C 1070 1122 1176 1248 1330 1430 1548 1678 1832

DES1-H121S 1030 1083 1137 1206 1290 1389 1507 1639 1792

DEB1-H121B 910 963 1017 1086 1170 1269 1387 1519 1672


DEC1-H122C 1120 1172 1226 1298 1380 1480 1598 1728 1882

DES1-H122S 1080 1133 1187 1256 1340 1439 1557 1689 1842

DEB1-H122B 960 1013 1067 1136 1220 1319 1437 1569 1722

Fixed Back; Fixed (Leather/Fabric Wrap) Arms - Synchro

DEC1-H131C 1080 1225 1197 1273 1361 1467 1590 1739 1886

DES1-H131S 1040 1096 1156 1232 1319 1424 1549 1697 1845

Fixed Back; Fixed (Leather/Fabric Wrap) Arms - Synchro/Seat Slider

DEC1-H132C 1130 1275 1247 1323 1411 1517 1640 1789 1936

DES1-H132S 1090 1146 1206 1282 1369 1474 1599 1747 1895











Base

DEB 2 BDorso E-Line




EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO E-LINE | HIGH BACK




DEC1-H211C 960 1012 1067 1138 1221 1322 1440 1575 1722

DES1-H211S 920 971 1026 1097 1179 1279 1399 1533 1681

DEB1-H211B 800 851 906 977 1059 1159 1279 1413 1561


DEC1-H212C 1010 1062 1117 1188 1271 1372 1490 1625 1772

DES1-H212S 970 1021 1076 1147 1229 1329 1449 1583 1731

DEB1-H212B 850 901 956 1027 1109 1209 1329 1463 1611


DEC1-H221C 1090 1142 1196 1268 1350 1450 1568 1698 1852

DES1-H221S 1050 1103 1157 1226 1310 1409 1527 1659 1812

DEB1-H221B 930 983 1037 1106 1190 1289 1407 1539 1692


DEC1-H222C 1140 1192 1246 1318 1400 1500 1618 1748 1902

DES1-H222S 1100 1153 1207 1276 1360 1459 1577 1709 1862

DEB1-H222B 980 1033 1087 1156 1240 1339 1457 1589 1742

Adjustable Back; Fixed (Leather/Fabric Wrap) Arms - Synchro

DEC1-H231C 1100 1157 1217 1293 1381 1487 1610 1759 1906

DES1-H231S 1060 1116 1176 1252 1339 1444 1569 1717 1865

Adjustable Back; Fixed (Leather/Fabric Wrap) Arms - Synchro/Seat Slider

DEC1-H232C 1150 1207 1267 1343 1431 1537 1660 1809 1956

DES1-H232S 1110 1166 1226 1302 1389 1494 1619 1767 1915











Base

DEB 2 BDorso E-Line




EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO T-LINE | MID BACK




DTC1-M111C 837 876 914 964 1023 1088 1169 1257 1354

DTS1-M111S 800 837 875 924 983 1055 1131 1218 1315

DTB1-M111B 699 736 774 822 882 954 1029 1117 1213


DTC1-M112C 887 926 964 1014 1073 1138 1219 1307 1404

DTS1-M112S 850 887 925 974 1033 1105 1181 1268 1365

DTB1-M112B 749 786 824 872 932 1004 1079 1167 1263


DTC1-M121C 957 994 1032 1082 1142 1206 1287 1374 1473

DTS1-M121S 892 933 970 1018 1078 1143 1225 1312 1409

DTB1-M121B 791 828 866 914 974 1046 1121 1209 1305


DTC1-M122C 1007 1044 1082 1132 1192 1256 1337 1424 1523

DTS1-M122S 942 983 1020 1068 1128 1193 1275 1362 1459

DTB1-M122B 841 878 916 964 1024 1096 1171 1259 1355


DTC1-M101C 782 821 858 907 967 1039 1114 1202 1299

DTS1-M101S 708 746 785 833 893 963 1039 1127 1224

DTS1-M101B 667 705 743 791 852 922 997 1086 1182


DTC1-M102C 832 871 908 957 1017 1089 1164 1252 1340

DTS1-M102S 758 796 835 883 943 1013 1089 1177 1274

DTB1-M102B 717 755 793 841 902 972 1047 1136 1232



ORDERING NOTESDorso T-Line versions are available without the back metal accent detail. Please contact Customer Service for ordering information.


DTC 1 M 1 0 1 CDorso T-Line



DTS H 2 1 2 SDorso T-Line



Base

DTB 2 BDorso T-Line



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO T-LINE | MID BACK




DTC1-M211C 856 894 932 983 1041 1107 1188 1275 1373

DTS1-M211S 819 856 893 942 1002 1074 1149 1236 1333

DTB1-M211B 718 754 792 841 901 972 1048 1135 1232


DTC1-M212C 906 944 982 1033 1091 1157 1238 1325 1423

DTS1-M212S 869 906 943 992 1052 1124 1199 1286 1383

DTB1-M212B 768 804 842 891 951 1022 1098 1185 1282


DTC1-M221C 975 1012 1051 1100 1160 1225 1305 1393 1491

DTS1-M221S 911 951 988 1037 1097 1161 1243 1330 1428

DTB1-M221B 810 846 884 933 993 1064 1140 1227 1324


DTC1-M222C 1025 1062 1101 1150 1210 1275 1355 1443 1541

DTS1-M222S 961 1001 1038 1087 1147 1211 1293 1380 1478

DTB1-M222B 860 896 934 983 1043 1114 1190 1277 1374


DTC1-M201C 802 841 878 927 987 1059 1134 1222 1319

DTS1-M201S 728 766 805 853 913 983 1059 1147 1244

DTS1-M201B 687 725 763 811 872 942 1017 1106 1202


DTC1-M202C 852 891 928 977 1037 1109 1184 1272 1378

DTS1-M202S 778 816 855 903 963 1033 1109 1197 1294

DTB1-M202B 737 775 813 861 922 992 1067 1156 1252











Base

DTB 2 BDorso T-Line



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO T-LINE | HIGH BACK




DTC1-H111C 865 913 963 1029 1105 1198 1306 1431 1566

DTS1-H111S 828 875 926 991 1066 1158 1269 1392 1528

DTB1-H111B 718 765 815 880 956 1048 1158 1282 1418


DTC1-H112C 915 963 1013 1079 1155 1248 1356 1481 1616

DTS1-H112S 878 925 976 1041 1116 1208 1319 1442 1578

DTB1-H112B 768 815 865 930 1006 1098 1208 1332 1468


DTC1-H121C 984 1032 1082 1148 1224 1316 1424 1544 1685

DTS1-H121S 948 996 1046 1110 1187 1278 1386 1508 1649

DTB1-H121B 837 886 936 999 1076 1167 1276 1397 1538


DTC1-H122C 1034 1082 1132 1198 1274 1366 1474 1594 1735

DTS1-H122S 998 1046 1096 1160 1237 1328 1436 1558 1699

DTB1-H122B 887 936 986 1049 1126 1217 1336 1447 1588


DTC1-H101C 805 853 903 969 1045 1138 1246 1371 1506

DTS1-H101S 728 775 826 891 966 1058 1169 1292 1428

DTS1-H101B 683 730 780 845 921 1013 1123 1247 1383


DTC1-H102C 855 903 953 1019 1095 1188 1296 1421 1556

DTS1-H102S 778 825 876 941 1016 1108 1219 1342 1478

DTB1-H102B 733 780 830 895 971 1063 1173 1297 1433











Base

DTB 2 BDorso T-Line



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO T-LINE | HIGH BACK




DTC1-H211C 883 931 982 1047 1123 1216 1325 1449 1584

DTS1-H211S 846 893 944 1009 1085 1177 1287 1410 1547

DTB1-H211B 788 835 885 950 1026 1118 1228 1352 1488


DTC1-H212C 933 981 1032 1097 1173 1266 1375 1499 1634

DTS1-H212S 896 943 994 1059 1135 1227 1337 1460 1597

DTB1-H212B 838 885 935 1000 1076 1168 1278 1402 1538


DTC1-H221C 1003 1051 1100 1167 1242 1334 1443 1562 1704

DTS1-H221S 966 1015 1064 1128 1205 1296 1405 1526 1667

DTB1-H221B 857 906 956 1019 1096 1187 1296 1417 1558


DTC1-H222C 1053 1101 1150 1217 1292 1384 1493 1612 1754

DTS1-H222S 1016 1065 1114 1178 1255 1346 1455 1576 1717

DTB1-H222B 907 956 1006 1069 1146 1237 1346 1467 1608


DTC1-H201C 825 873 923 989 1065 1158 1266 1391 1526

DTS1-H201S 748 795 846 911 986 1078 1189 1312 1448

DTS1-H201B 703 750 800 865 941 1033 1143 1267 1403


DTC1-H202C 875 923 973 1039 1115 1208 1316 1441 1576

DTS1-H202S 798 845 896 961 1036 1128 1239 1362 1498

DTB1-H202B 753 800 850 915 991 1083 1193 1317 1453











Base

DTB 2 BDorso T-Line



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO WEAVE | INTRODUCTION

Dorso, one of the world’s most advanced seating concepts, is now available with a breathable woven knit back. The strikingly modernchair design now provides a level of long term sitting comfort and support.


Overall Overall Overall Seat Height of Width Height Seat Shipping Cube COMWidth Depth Height Height Arms from Floor between Arms Range Depth Weight Yardage

S-LINE MID BACK Fixed 24.5 22.5 42.5 18–22 27–30.5 20 39–42.75 18 51 15 0.75Adjustable 25 22.5 42.5 18–22 25.5–32 19.5 39–42.75 18 51 15 0.75Armless 19.5 22.5 42.5 18–22 n/a n/a 39–42.75 18 46 15 0.75

S-LINE HIGH BACK Fixed 24.5 22.5 47 18–22 27–30.5 20 25–47 18 52 18 0.75Adjustable 25 22.5 47 18–22 25.5–32 19.5 43.25–47 18 52 18 0.75Armless 19.5 22.5 47 18–22 n/a n/a 43.25–47 18 47 18 0.75

S-LINE HIGH BACK Fixed 24.5 22.5 50.5 18–22 27–30.5 20 47–50.5 18 54 18 0.75with Headrest Adjustable 25 22.5 50.5 18–22 25.5–32 19.5 47–50.5 18 54 18 0.75

N-LINE MID BACK Fixed 24.5 21.5 41 18–22 27–30.5 20 37.5–41 18 50 15 0.75Adjustable 25 21.5 41 18–22 25.5–32 19.5 37.5–41 18 50 15 0.75Armless 19.5 21.5 41 18–22 n/a n/a 37.5–41 18 45 15 0.75

N-LINE HIGH BACK Fixed 24.5 21.5 45.5 18–22 27–30.5 20 41.5–45.5 18 51 18 0.75Adjustable 25 21.5 45.5 18–22 25.5–32 19.5 41.5–45.5 18 51 18 0.75

N-LINE HIGH BACK Fixed 24.5 21.5 50.5 18–22 27–30.5 20 47–50.5 18 53 19.5 0.75with Headrest Adjustable 25 21.5 50.5 18–22 25.5–32 19.5 47–50.5 18 53 19.5 0.75

Note: Some vinyls, leathers and upholsteries are not suitable for application on Dorso seating.For vinyls other than Maharam’s Lariat or Momentum’s Cashmere, please submit a sample to Customer Service for an approval process at time oforder.

The approval process is as follows:

1. A sample of the COM must be provided to Krug Customer Service prior to or at time of order. For Maharam or Momentum fabric, Krug will obtainthe fabric sample.

2. The sample will be reviewed and the customer advised if the fabric is unsuitable.

3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.

DORSO | S-LINE DORSO | N-LINE

OPTIONS

All Dorso swivel and tilter models are available with an optional seat slider mechanism at an upcharge of $50 list.

Please contact Customer Service for more information on options for the Dorso series.

Height measurements of Dorso are taken with the pneumatic lift in the lowest position.All dimensions are in inches and approximate and are subject to change without notice.Contact Customer Service if dimensions are critical.

FEATURESFor a complete listing of features please see page 34.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO WEAVE | FEATURES

ARM STYLES

Optional fixed cantilever or adjustableblack arm constructed of die cast metalwith textured plastic arm pads. Theadjustable arms feature seven heightadjustment positions, with a totaladjustment range of 2.75′′. All Dorsomodels are also available in armlessversions.

S-LINEFixed cantilever and adjustable arms areavailable in Silver Metallic or PolishedChrome accent finishes to match metalbase. The fixed arm is also available in anupholstered leather version.

N-LINEFixed cantilever and adjustable arms areavailable in black textured plastic only.

BASE STYLES

S-LINEDorso seating features optional SilverMetallic or Polished Chrome finish anddual wheel casters. S-Line models featuresteel upper and lower seat back exposedframe rail available in Silver Metallic orPolished Chrome finish.

N-LINEDorso seating features injection molded,glass reinforced black nylon bases withdual wheel casters.

DORSO CONTROLS

All Dorso S-Line and N-Line tilters comewith a Synchro tilt mechanism. The tiltadjustment range offers five recline-lockpositions, as well as free flowingmovement. The forward pivot of themechanism allows the back and the seat toarticulate synchronously in a 2:1 ratio, sothat upward tilt of the seat is minimized asthe back reclines.

SEAT HEIGHT

In the seated position, a pull upwards onthe height adjustment lever located underthe seat of the user’s right side adjusts theheight up or down with a total height rangeof 4.5′′.

BACK TENSION

Back tension on the mechanism iscontrolled with an adjustment knob underthe seat. It has been designed to provide arange of back tension adjustment suitablefor users of varying sizes and preferences.

SEAT SLIDER

All Dorso tilters are available with anoptional seat slider mechanism featuring a2′′ range of adjustment front to back whenseated. The lever to activate this feature islocated under the seat of the user’s rightside and is activated by an upward pull ofthe lever.

BACK HEIGHT

Back height adjustment is a standardfeature on S-Line chairs, and an option onN-Line chairs. It offers an adjustmentrange of 11 positions over a 2′′ range ofmovement. Back height adjustment isoperated while in the seated position, byplacing the right hand on the right bottomof the chair back, and the left hand on theleft bottom of the chair back. The back islifted and clicked into the desired height.Raising the back to the highest positionreleases the back height lock so it can belowered.

BACK COLOR OPTIONS

S-LINEBlackWarm grayTanSoft beigeWinter white

N-LINE*Black

*S-Line color options are available on theN-Line with a minimum of 25 chairs perorder.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO WEAVE S-LINE | MID BACK



FIXED ARMS (black with metal accent)

DOS1-M2211M 1059 1069 1079 1095 1110 1126 1146 1167 1188

Silver metallic finish*

DOS1-M2231M 1357


DOC1-M2211M 1108 1119 1129 1144 1160 1175 1196 1216 1237

Polished chrome finish*

DOC1-M2231M 1391


ADJUSTABLE ARMS (black with metal accent)

DOS1-M2221M 1017 1027 1037 1053 1068 1084 1104 1125 1145


DOC1-M2221M 1069 1079 1090 1105 1121 1136 1157 1177 1198


ARMLESS

DOS1-M2201M 949 959 969 985 1000 1016 1036 1057 1077


DOC1-M2201M 994 1004 1015 1030 1045 1061 1082 1102 1123



*The finish applies to exposed metal elements specified for the chair: chair base, fixed and adjustable arm accents, and the bars at the top and bottomof the seat back.

ORDERING NOTESDorso S-Line versions are available without the back metal accent detail. Please contact Customer Service for ordering information.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.The upholstered leather cantilever arm is only available for use with Krug In-stock leathers.Clearly indicate on order fabric selection for seat and weave selection for back.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.

PRODUCT CODE KEYLine Series Back Style Back Adjustment Back Details Arm Style Mechanism Base

DOS 1 M 2 2 0 1 MDorso S-Line

(Silver Metallic)Management, Task

& Conference SeatingMid Back Adjustment No Headrest

WeaveArmless Synchro Metal Base

DOC H 3 1 JDorso S-Line

(Polished Chrome)High Back Headrest (no trim)

(High Back only)Weave

Fixed Cantilever Jury Base

2Adjustable (black)

3Fixed Cantilever - Leather


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO WEAVE S-LINE | HIGH BACK


DESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9FIXED ARMS (black with metal accent)DOS1-H2211M 1144 1155 1165 1180 1196 1211 1232 1252 1273


DOS1-H2231M 1442

DOC1-H2211M 1195 1205 1215 1231 1246 1262 1282 1303 1324


DOC1-H2231M 1492

ADJUSTABLE ARMS (black with metal accent)DOS1-H2221M 1104 1114 1125 1140 1156 1171 1192 1212 1233


DOC1-H2221M 1156 1166 1176 1192 1207 1223 1243 1264 1284


DORSO WEAVE S-LINE | HIGH BACK with HeadrestFIXED ARMS (black with metal accent)DOS1-H2311M 1260 1270 1280 1296 1311 1327 1347 1368 1388


DOS1-H2331M 1557


DOC1-H2311M 1311 1321 1332 1347 1363 1378 1399 1419 1440


DOC1-H2331M 1609


ADJUSTABLE ARMS (black with metal accent)DOS1-H2321M 1220 1230 1240 1256 1271 1286 1307 1328 1348


DOC1-H2321M 1271 1281 1292 1307 1323 1338 1359 1379 1400


Each chair features the Synchro Tilt mechanism*The finish applies to exposed metal elements specified for the chair: chair base, fixed and adjustable arm accents, and the bars at the top and bottomof the seat back.

ORDERING NOTESDorso S-Line versions are available without the back metal accent detail. Please contact Customer Service for ordering information.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.The upholstered leather cantilever arm is only available for use with Krug In-stock leathers.Clearly indicate on order fabric selection for seat and weave selection for back.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.




& Conference SeatingMid Back Adjustment No Headrest

WeaveArmless Synchro Metal Base




Fixed Cantilever Jury Base

2Adjustable (black)



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO WEAVE N-LINE | MID BACK



FIXED ARMS (black)

DON1-M1211B 930 940 951 966 982 997 1018 1038 1059

No back adjustment

DON1-M2211B 984 994 1004 1020 1035 1051 1071 1092 1112

With back adjustment

ADJUSTABLE ARMS (black)

DON1-M1221B 890 900 911 926 941 957 977 998 1019

No back adjustment

DON1-M2221B 942 953 963 979 994 1009 1030 1051 1071


ARMLESS

DON1-M1201B 820 830 840 856 871 887 907 928 949

No back adjustment

DON1-M2201B 866 877 887 902 918 933 954 974 995



ORDERING NOTESDorso N-Line tilter models feature black bases and are available with an optional chrome base at an upcharge of $125.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.Clearly indicate on order fabric selection for seat. Only black weave is offered on Dorso N.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.


DON 1 M 1 0 0 1 BDorso N-Line Management, Task

& Conference SeatingMid Back No Adjustment No Headrest

WeaveArmless Synchro Black

Nylon Base

H 2 1 1 JHigh Back Adjustment Headrest (no trim)


Fixed (black)Cantilever

Jury Base

2Adjustable (black)


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO WEAVE N-LINE | HIGH BACK



FIXED ARMS (black)

DON1-H1211B 1040 1051 1061 1076 1092 1107 1128 1148 1169

No back adjustment

DON1-H2211B 1092 1102 1112 1128 1143 1159 1179 1200 1221



DON1-H1221B 1000 1010 1021 1036 1052 1067 1088 1108 1129

No back adjustment

DON1-H2221B 1051 1061 1071 1087 1102 1118 1138 1159 1179


DORSO WEAVE N-LINE | HIGH BACK with HeadrestFIXED ARMS (black)

DON1-H1311B 1156 1166 1176 1192 1207 1223 1243 1264 1284

No back adjustment

DON1-H2311B 1208 1218 1229 1244 1260 1275 1296 1316 1337



DON1-H1321B 1115 1126 1136 1152 1167 1182 1203 1224 1244

No back adjustment

DON1-H2321B 1167 1177 1188 1203 1218 1234 1255 1275 1296



ORDERING NOTESDorso N-Line tilter models feature black bases and are available with an optional chrome base at an upcharge of $125.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.Clearly indicate on order fabric selection for seat. Only black weave is offered on Dorso N.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.PRODUCT CODE KEY

Line Series Back Style Back Adjustment Back Details Arm Style Mechanism Base


& Conference SeatingMid Back No Adjustment No Headrest

WeaveArmless Synchro Black

Nylon Base



Fixed (black)Cantilever

Jury Base

2Adjustable (black)


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO | INTRODUCTION

Presenting one of the world’s most advanced seating concepts: new technology that offers outstanding ergonomics in a strikinglymodern chair design, while providing a level of long-term sitting comfort and support that has been the hallmark of European seating.

DORSO: Designed by Gabriel Teixido


Overall Overall Overall Seat Height of Width Height Seat Shipping Cube COMWidth Depth Height Height Arms from Floor between Arms Range Depth Weight Yardage

S-LINE MID BACK Fixed 24.5 22.5 42.5 18–22 27–30.5 20 39–42.75 18 51 15 1.7Adjustable 25 22.5 42.5 18–22 25.5–32 19.5 39–42.75 18 51 15 1.7Armless 19.5 22.5 42.5 18–22 n/a n/a 39–42.75 18 46 15 1.7

S-LINE HIGH BACK Fixed 24.5 22.5 47 18–22 27–30.5 20 43.25–47 18 52 18 1.9Adjustable 25 22.5 47 18–22 25.5–32 19.5 43.25–47 18 52 18 1.9Armless 19.5 22.5 47 18–22 n/a n/a 43.25–47 18 47 18 1.9

S-LINE HIGH BACK Fixed 24.5 22.5 50.5 18–22 27–30.5 20 47–50.5 18 54 18 1.9with Headrest Adjustable 25 22.5 50.5 18–22 25.5–32 19.5 47–50.5 18 54 18 1.9

N-LINE MID BACK Fixed 24.5 21.5 41 18–22 27–30.5 20 37.5–41 18 50 15 1.7Adjustable 25 21.5 41 18–22 25.5–32 19.5 37.5–41 18 50 15 1.7Armless 19.5 21.5 41 18–22 n/a n/a 37.5–41 18 45 15 1.7

N-LINE HIGH BACK Fixed 24.5 21.5 45.5 18–22 27–30.5 20 41.5–45.5 18 51 18 1.9Adjustable 25 21.5 45.5 18–22 25.5–32 19.5 41.5–45.5 18 51 18 1.9

N-LINE HIGH BACK Fixed 24.5 21.5 50.5 18–22 27–30.5 20 47–50.5 18 53 19.5 1.9with Headrest Adjustable 25 21.5 50.5 18–22 25.5–32 19.5 47–50.5 18 53 19.5 1.9

ORDERING NOTE: Add 0.5 yards for seating with leather wrapped arm option.

Note: Some vinyls are not suitable for upholstery on Dorso seating. For vinyls other than Maharam’s Lariat or Momentum’s Cashmere,please submit a sample to Customer Service for an approval process at time of order.The approval process is as follows:

1. A sample of the COM vinyl fabric must be provided to Krug Customer Service prior to or at time of order. For Maharam or Momentum fabric, Krugwill obtain the fabric sample.


3. The COM vinyl will be inspected when received at the factory to identify any further concerns with its suitability.

DORSO | S-LINE DORSO | N-LINE DORSO | GUEST

OPTIONS

All Dorso swivel and tilter models are available with an optional seat slider mechanism at an upcharge of $50 list.

Please contact Customer Service for more information on options for the Dorso series.

Height measurements of Dorso are taken with the pneumatic lift in the lowest position.All dimensions are in inches and approximate and are subject to change without notice.Contact Customer Service if dimensions are critical.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO | FEATURES

ARM STYLES

Optional fixed cantilever oradjustable black arm constructed ofdie cast metal with textured plasticarm pads. The adjustable armsfeature seven height adjustmentpositions, with a total adjustmentrange of 2.75″. All Dorso models arealso available in armless versions.S-LINEFixed cantilever and adjustable armsare available in Silver Metallic orPolished Chrome accent finishes tomatch metal base. The fixed arm isalso available in an upholsteredleather version.N-LINEFixed cantilever and adjustable armsare available in black texturedplastic only.

BASE STYLES

S-LINEDorso seating features optionalSilver Metallic or Polished Chromefinish and dual wheel casters. S-Linemodels feature steel upper and lowerseat back exposed frame railavailable in Silver Metallic orPolished Chrome finish.N-LINEDorso seating features injectionmolded, glass reinforced black nylonbases with dual wheel casters.

DORSO-GUEST SEATING

S-LINEDorso seating is available in threebase styles:- Cantilever- 4-Leg- 4-Leg with twin wheel castersEach is offered in a Silver Metallicor Polished Chrome steel frame.Cantilever and 4-Leg versions ofS-Line Guest Seating feature rubberglides.N-LINEDorso seating is available in threebase styles:- Cantilever- 4-Leg- 4-Leg with twin wheel castersEach is offered in a Silver Metallicsteel frame.

DORSO - CONTROLS

All Dorso S-Line and N-Linetilters come with a synchro tiltmechanism. One of the best-engineered and most user-friendlychair controls, the synchro tiltmechanism is unique in providing asingle, easily-accessed lever to adjusttilt lock positions and seat height.The tilt adjustment range offers fiverecline-lock positions, as well as freeflowing movement. The forwardpivot of the mechanism allows theback and the seat to articulatesynchronously in a 2:1 ratio, so thatupward tilt of the seat is minimizedas the back reclines. The synchro tiltmechanism also features an anti-kickback lock release, providing asmooth transition from locked tounlocked tilt adjustment.

SEAT HEIGHT

In the seated position, a pullupwards on the height adjustmentlever located under the seat of theuser’s right side adjusts the heightup or down with a total height rangeof 4.5″.

BACK TENSION

Back tension on the synchro tiltmechanism is controlled with anadjustment knob under the seat. Ithas been designed to provide a rangeof back tension adjustment suitablefor users of varying sizes andpreferences.

SEAT SLIDER

All Dorso tilters are available withan optional seat slider mechanismfeaturing a 2″ range of adjustmentfront to back when seated. The leverto activate this feature is locatedunder the seat of the user’s rightside and is activated by an upwardpull of the lever.

BACK HEIGHT

Back height adjustment is astandard feature on S-Line chairs,and an option on N-Line chairs.It offers an adjustment range of11 positions, over a 2″ range ofmovement. Back height adjustmentis operated while in the seatedposition, by placing the right handon the right bottom of the chairback, and the left hand on the leftbottom of the chair back. The backis lifted and clicked into the desiredheight. Raising the back to thehighest position releases the backheight lock so it can be lowered.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO S-LINE | MID BACK




DOS1-M2011M 1114 1156 1198 1252 1319 1399 1484 1582 1690


DOS1-M2031M 1771


DOC1-M2011M 1167 1210 1252 1309 1375 1448 1539 1636 1746


DOC1-M2031M 1826



DOS1-M2021M 1070 1114 1156 1210 1277 1350 1441 1539 1648


DOC1-M2021M 1126 1167 1210 1265 1332 1405 1496 1593 1703


ARMLESS

DOS1-M2001M 998 1040 1084 1137 1205 1284 1368 1467 1575


DOC1-M2001M 1046 1089 1131 1185 1252 1332 1417 1515 1624




ORDERING NOTESDorso S-Line versions are available without the back metal accent detail. Please contact Customer Service for ordering information.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.The upholstered leather cantilever arm is only available for use with Krug In-stock leathers.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.




& Conference SeatingMid Back Adjustment No Headrest Armless Synchro Metal Base



(High Back only)Fixed Cantilever Jury Base

2Adjustable (black)



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO S-LINE | HIGH BACK




DOS1-H2011M 1205 1258 1314 1388 1472 1575 1698 1836 1989


DOS1-H2031M 2026


DOC1-H2011M 1205 1258 1314 1388 1472 1575 1698 1836 1989


DOC1-H2031M 2081



DOS1-H2021M 1162 1217 1272 1343 1430 1531 1654 1789 1947


DOC1-H2021M 1217 1272 1326 1399 1484 1588 1709 1843 2001


DORSO S-LINE | HIGH BACK with HeadrestFIXED ARMS (black with metal accent)

DOS1-H2111M 1326 1393 1454 1539 1636 1752 1885 2031 2195


DOS1-H2131M 2220


DOC1-H2111M 1380 1448 1509 1593 1690 1806 1940 2087 2251


DOC1-H2131M 2277



DOS1-H2121M 1284 1343 1410 1496 1593 1709 1836 1989 2153


DOC1-H2121M 1338 1399 1467 1551 1648 1764 1892 2043 2208



ORDERING NOTESDorso S-Line versions are available without the back metal accent detail. Please contact Customer Service for ordering information.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.The upholstered leather cantilever arm is only available for use with Krug In-stock leathers.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.




& Conference SeatingMid Back Adjustment No Headrest Armless Synchro Metal Base



(High Back only)Fixed Cantilever Jury Base

2Adjustable (black)



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO N-LINE | MID BACK



FIXED ARMS (black)

DON1-M1011B 979 1022 1070 1126 1185 1265 1350 1454 1563

No back adjustment

DON1-M2011B 1035 1076 1126 1180 1242 1319 1405 1509 1617



DON1-M1021B 937 979 1022 1076 1143 1222 1309 1405 1515

No back adjustment

DON1-M2021B 992 1035 1076 1131 1198 1277 1363 1459 1569


ARMLESS

DON1-M1001B 863 906 954 1009 1070 1150 1235 1338 1448

No back adjustment

DON1-M2001B 912 961 1004 1059 1126 1198 1289 1388 1496



ORDERING NOTESDorso N-Line tilter models feature black bases and are available with an optional chrome base at an upcharge of $125.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.



& Conference SeatingMid Back No Adjustment No Headrest Armless Synchro Black

Nylon Base


(High Back only)Fixed (black)

CantileverJury Base

2Adjustable (black)


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO N-LINE | HIGH BACK



FIXED ARMS (black)

DON1-H1011B 1094 1150 1205 1277 1363 1467 1588 1727 1880

No back adjustment

DON1-H2011B 1150 1205 1258 1332 1417 1521 1642 1783 1935



DON1-H1021B 1052 1106 1162 1235 1319 1424 1545 1678 1836

No back adjustment

DON1-H2021B 1106 1162 1217 1289 1375 1478 1600 1733 1892


DORSO N-LINE | HIGH BACK with Headrest

FIXED ARMS (black)

DON1-H1111B 1217 1284 1343 1430 1527 1642 1776 1922 2087

No back adjustment

DON1-H2111B 1272 1338 1399 1484 1582 1698 1831 1977 2140



DON1-H1121B 1175 1235 1301 1388 1484 1600 1727 1880 2043

No back adjustment

DON1-H2121B 1229 1289 1357 1441 1539 1654 1783 1935 2098


ORDERING NOTESDorso N-Line tilter models feature black bases and are available with an optional polished chrome base orsilver metallic base at an upcharge of $125.Seat slider option is available on all armless and adjustable arm versions at an upcharge of $50 list.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.



& Conference SeatingMid Back No Adjustment No Headrest Armless Synchro Black

Nylon Base


(High Back only)Fixed (black)

CantileverJury Base

2Adjustable (black)


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO S-LINE GUEST



4 LEG BASEDOS2-10 668 700 735 779 833 901 973 1064 1162

Silver metallic base, armless

DOC2-10 735 767 796 846 901 961 1040 1126 1229

Polished chrome base, armless

DOS2-11 761 796 826 870 925 992 1070 1156 1252

Silver metallic base, fixed arms

DOC2-11 840 870 906 948 1004 1070 1143 1235 1332

Polished chrome base, fixed arms

4 LEG BASE with CastersDOS2-20 725 754 791 833 888 954 1027 1119 1217


DOC2-20 754 791 821 863 918 984 1064 1150 1247


DOS2-21 815 852 883 925 979 1046 1126 1210 1309


DOC2-21 893 925 961 1004 1059 1126 1198 1289 1388


CANTILEVER BASEDOS2-30 742 772 802 852 906 968 1046 1131 1235


DOC2-30 810 846 876 918 973 1040 1119 1205 1301


DOS2-31 925 961 992 1035 1089 1156 1235 1319 1417


DOC2-31 961 998 1027 1070 1126 1193 1272 1357 1454


ORDERING NOTESDorso Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.

PRODUCT CODE KEYLine Series Base Arm Style

DOS 2 1 0Dorso S-Line

(Silver Metallic)Guest Seating Four Leg Armless

DOC 2 1Dorso S-Line

(Polished Chrome)Four Leg

with CastersFixed Cantilever

3Cantilever


DON 2 1 0Dorso N-Line

(Silver MetallicBase)

Guest Seating Four Leg Armless

2 1Four Leg

with CastersFixed Cantilever

3Cantilever


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO N-LINE GUEST



4 LEG BASE

DON2-10 578 609 638 688 742 802 883 968 1070


DON2-11 645 680 711 754 810 876 954 1040 1137


4 LEG BASE with Casters

DON2-20 633 663 694 742 796 858 937 1022 1126


DON2-21 701 733 767 810 863 931 1009 1094 1193


CANTILEVER BASE

DON2-30 645 680 711 754 810 876 954 1040 1137


DON2-31 761 796 826 870 925 992 1070 1156 1252


ORDERING NOTESDorso Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.

DIMENSIONS & COM REQUIREMENTSOverall Overall Seat Height of Width Seat Height Shipping Cube COMWidth Depth Height Arms from Floor between Arms Depth Range Weight Yardage

S-LINE/4LEG Armless 20.75 25.50 18.5 27.5 19.5 19.5 36 32 14 1.3Fixed 24.5 25.50 18.5 27.5 19.5 19.5 36 37 14 1.3

S-LINE/4LEG Armless 20.75 24.75 18.5 27.5 19.5 19.5 36 33 14 1.3with Casters Fixed 24.5 24.75 18.5 27.5 19.5 19.5 36 38 14 1.3

S-LINE/ Armless 20.75 24.75 18.5 27.5 19.5 19.5 36 39 14 1.3Cantilever Base Fixed 24.5 24.75 18.5 27.5 19.5 19.5 36 44 14 1.3

N-LINE/4LEG Armless 20.75 25.50 18.5 27.5 19.5 19.5 34.75 31 14 1.3Fixed 24.5 25.50 18.5 27.5 19.5 19.5 34.75 36 14 1.3

N-LINE/4LEG Armless 20.75 24.75 18.5 27.5 19.5 19.5 34.75 32 14 1.3with Casters Fixed 24.5 24.75 18.5 27.5 19.5 19.5 34.75 37 14 1.3

N-LINE/ Armless 20.75 24.75 18.5 27.5 19.5 19.5 34.75 38 14 1.3Cantilever Base Fixed 24.5 24.75 18.5 27.5 19.5 19.5 34.75 43 14 1.3


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PAN AM | INTRODUCTION

Presenting PAN AM, a modern design for Management, Conference and Task seating applications. This exceptionally comfortable andversatile chair is without question one of the best values available in seating.



MID BACK Open Urethane 24.5 24.5 34.5 25 18.5 19 31 16.25 1.8Closed Upholstered 27.25 24.5 34.5 26.75 19 19 33 16.25 2.7Open Upholstered 24.5 24.5 34.5 25 18.5 19 31 16.25 2.2

HIGH BACK Open Urethane 24.5 24.5 40 25 18.5 19 35 22.75 1.9Closed Upholstered 27.25 24.5 40 26.75 19 19 37 22.75 2.8Open Upholstered 24.5 24.5 40 25 18.5 19 35 22.75 2.3

HIGH BACK Open Urethane 24.5 24.5 46 25 18.5 19 37 18.75 2.5with Headrest Closed Upholstered 27.25 24.5 46 26.75 19 19 39 18.75 3.4

Open Upholstered 24.5 24.5 46 25 18.5 19 37 18.75 2.9

OPTIONAL GAS LIFT HEIGHT RANGESPAN AM is available with two gas lift ranges. Unless clearly specified on order, PAN AM seating will be provided with the standard gas lift. The gas liftranges measured from the seat height are as follows:PAN AM standard gas lifts give a seat height of no greater than 16.4′′ when lowered and no less than 20.2′′ when extended. Low gas lifts give a seatheight of no greater than 15.04′′ when lowered and no less than 18′′ when extended. If dimensions are critical, please contact Customer Service.

Note: Some vinyls are not suitable for upholstery on PAN AM seating. For vinyls other than Maharam’s Lariat, or Momentum’s Cashmere pleasesubmit a sample to Customer Service for pre-approval process at time of order.

The Pre-approval process is as follows:

1. A sample of the COM vinyl fabric must be provided to Krug Customer Service prior to or at time of order. For Maharam fabric or Momentum, Krugwill obtain the fabric sample.


3. The COM vinyl will be inspected when received at the factory, to identify any further concerns with its suitability.

PAN AM | Mid Back PAN AM | High Back PAN AM | High Back w/Headrest

OPTIONS

Please contact Customer Service for more information on options for the PAN AM series.Height measurements of PAN AM are taken with the pneumatic lift in the lowest position.All dimensions are in inches and approximate and are subject to change without notice.Contact Customer Service if dimensions are critical.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PAN AM | FEATURES

ARM STYLES

PAN AM features three styles of fixedarms, including open urethane, closedupholstered and open upholsteredversions.

BACK STYLES

Available with two different back options,Mid and High, PAN AM is perfect fordesks and conference applications.

BASE STYLES

Featuring a five blade caster base with 21/4′′ hooded dual wheel casters, PAN AMbases are available in both Black Nylon,or Polished Aluminum.

SEAT HEIGHT

In the seated position, a pull upwards onthe height adjustment lever located underthe seat of the user’s right side adjuststhe height up or down with a total heightrange of:Standard gas lift: 3.5″Low gas lift: 3.0″

PAN AM – CONTROLS

PAN AM is available with either a SwivelTilt or Knee Tilt mechanism. All PANAM seating features an adjustable tilttension knob, and height adjustmentlever. On the Knee Tilt version ofPAN AM, the height adjustment leveralso operates a forward tilt lock.

TILT TENSION

A tilt tension knob is located under theseat for all versions of PAN AM. ForKnee Tilt versions a push of the heightadjustment lever toward the gas liftcylinder activates the tilt lock feature.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PAN AM | MID BACK



OPEN URETHANE ARMS

PAN1-M11B 690 749 819 879 948 1012 1076 1140 1251

Black base, swivel tilt

PAN1-M12B 778 843 906 971 1041 1099 1170 1229 1339

Black base, knee tilt

PAN1-M11A 778 843 906 966 1036 1099 1164 1229 1339

Polished aluminum base, swivel tilt

PAN1-M12A 865 930 995 1059 1129 1187 1257 1316 1428

Polished aluminum base, knee tilt

CLOSED UPHOLSTERED ARMS

PAN1-M21B 1012 1105 1205 1298 1392 1485 1585 1679 1790


PAN1-M22B 1105 1199 1298 1392 1485 1580 1673 1772 1883


PAN1-M21A 1099 1194 1293 1386 1479 1573 1673 1766 1878


PAN1-M22A 1194 1288 1386 1479 1573 1667 1760 1860 1971


ORDERING NOTESPlease specify clearly on purchase order if low gas lift is to be applied.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.

PRODUCT CODE KEYLine Series Back Style Arm Style Mechanism Base

PAN 1 M 1 1 BPAN AM Management, Task

& Conference SeatingMid Back Open Urethane Arm Swivel Tilt Black Base

H 2 2 AHigh Back Closed Upholstered Arm Knee Tilt Polished Aluminum Base

3 JOpen Upholstered Arms Jury Base


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PAN AM | MID BACK



OPEN UPHOLSTERED ARMS

PAN1-M31B 1083 1175 1270 1368 1463 1556 1649 1744 1855


PAN1-M32B 1170 1270 1363 1455 1550 1649 1744 1836 1948


PAN1-M31A 1170 1263 1358 1455 1550 1643 1725 1831 1943


PAN1-M32A 1257 1358 1450 1544 1638 1738 1831 1924 2035


PAN AM | HIGH BACKOPEN URETHANE ARMS

PAN1-H11B 696 761 830 901 966 1036 1099 1170 1280


PAN1-H12B 784 855 925 995 1059 1129 1194 1263 1375


PAN1-H11A 784 848 918 989 1053 1123 1187 1257 1368


PAN1-H12A 870 941 1012 1083 1145 1181 1280 1352 1463









EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PAN AM | HIGH BACK




PAN1-H21B 1018 1118 1216 1316 1414 1509 1614 1708 1819


PAN1-H22B 1111 1210 1311 1409 1509 1603 1703 1800 1912


PAN1-H21A 1105 1205 1303 1404 1504 1597 1703 1795 1907


PAN1-H22A 1199 1298 1399 1497 1597 1689 1790 1888 1999



PAN1-H31B 1088 1187 1288 1380 1479 1580 1679 1778 1888


PAN1-H32B 1181 1280 1380 1474 1573 1673 1772 1872 1983


PAN1-H31A 1175 1275 1375 1469 1567 1667 1766 1865 1977


PAN1-H32A 1270 1368 1469 1561 1661 1760 1860 1959 2070









EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PAN AM | HIGH BACK WITH HEADREST



OPEN URETHANE ARMS

PAN1-HR-11B 737 802 871 942 1007 1077 1140 1211 1321


PAN1-HR-12B 825 896 966 1036 1100 1170 1235 1304 1416


PAN1-HR-11A 825 889 959 1030 1094 1164 1228 1298 1409


PAN1-HR-12A 912 983 1054 1124 1187 1223 1321 1394 1504



PAN1-HR-21B 1059 1159 1258 1358 1455 1550 1655 1749 1860


PAN1-HR-22B 1153 1251 1352 1450 1550 1644 1744 1842 1953


PAN1-HR-21A 1146 1246 1344 1445 1545 1638 1744 1836 1948


PAN1-HR-22A 1240 1339 1440 1538 1638 1730 1831 1929 2040



PAN1-HR-31B 1129 1228 1329 1421 1520 1621 1720 1819 1929


PAN1-HR-32B 1223 1321 1421 1515 1614 1714 1813 1913 2024


PAN1-HR-31A 1216 1316 1416 1510 1608 1708 1808 1907 2018


PAN1-HR-32A 1311 1409 1510 1603 1703 1801 1901 2000 2112






HR 3High Back with Headrest Open Upholstered Arms


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MODENA | FEATURES

ARM STYLES

OPEN URETHANE ARM

Molded black urethane arm

CLOSED UPHOLSTERED ARM

Upholstered arm with a closed

upholstered panel

OPEN WITH UPHOLSTERED PAD

Molded black urethane arm with an

inset upholstered pad for

comfort

LEATHER ARM

Leather wrapped upholstered arm

with detailed top stitching

MECHANISMS

SWIVEL TILT

Features swivel tilt action with single lever height adjustment and adjustable tilt tension.

KNEE TILT

Features swivel tilt action with single lever for height adjustment and forward tilt lock.

Adjustable tilt tension.

JURY BASE

For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MODENA | DIMENSIONS & COM REQUIREMENTS


MID BACK Open urethanearms

25.25 27.75 35.5 23.75 20.0 19.0 36 19 1.9

Open urethanearms withupholstered pad

25.25 27.75 35.5 23.75 20.0 19.0 36 19 1.9

Closed upholsteredpad

25.25 27.75 35.5 23.75 20.0 19.0 36 19 2.8

Open upholsteredleather only arms

25.25 27.75 35.5 23.75 20.0 19.0 36 19 1.9

HIGH BACK Open urethanearms

25.25 27.75 41.5 23.75 20.0 19.0 38 23 2.1

Open urethanearms withupholstered pad

25.25 27.75 41.5 23.75 20.0 19.0 38 23 2.1

Closed upholsteredpad

25.25 27.75 41.5 23.75 20.0 19.0 38 23 3.1

Open upholsteredleather only arms

25.25 27.75 41.5 23.75 20.0 19.0 38 23 2.1

Height measurements of Modena are taken with the pneumatic lift in the lowest position and with a standard height range gas lift. Alldimensions are in inches and approximate and are subject to change without notice. Contact Customer Service if dimensions arecritical.

ORDERING NOTESAdd 2.6 COM yards for leather wrapped arm mid back chair.Add 2.9 COM yards for leather wrapped arm high back chair.

OPTIONAL GAS LIFT HEIGHT RANGESModena is available with two gas lift ranges. Unless clearly specified on order, Modena seating will be provided with the standard gas lift.The gas lift ranges measured from the seat height are as follows:

Modena standard gas lifts give a seat height of no greater than 16′′ when lowered and no less than 19.9′′ when extended. Low gas lifts give a seatheight of no greater than 14.72′′ when lowered and no less than 17.8′′ when extended. If dimensions are critical, please contact Customer Service.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MODENA | MID BACK



OPEN URETHANE ARM

MOD1-M11 821 852 883 943 1004 1064 1126 1217 1380

MOD1-M12 937 968 998 1059 1119 1180 1242 1332 1496


MOD1-M21 1258 1289 1319 1380 1441 1502 1563 1654 1902

MOD1-M22 1380 1410 1441 1502 1563 1624 1684 1776 2023

OPEN URETHANE ARM WITH UPHOLSTERED PAD

MOD1-M31 948 979 1009 1070 1131 1193 1252 1343 1509

MOD1-M32 1040 1070 1100 1162 1222 1284 1343 1435 1600

OPEN UPHOLSTERED LEATHER WRAPPED ARM

MOD1-M41 1094 1126 1156 1217 1277 1338 1399 1490 1738

MOD1-M42 1210 1242 1272 1332 1393 1454 1515 1606 1854

ORDERING NOTESFor Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.

PRODUCT CODE KEYLine Series Back Style Arm Style Base Style Mechanism

MOD 1 M 1 J 1Modena Management Seating Mid Back Open Urethane Arm Jury Base Swivel Tilt

2 2Closed Upholstered Arm Knee Tilt

3Open with Upholstered Pad

4Open Leather Arm


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MODENA | HIGH BACK



OPEN URETHANE ARM

MOD1-H11 846 883 918 973 1035 1094 1156 1247 1430

MOD1-H12 968 1004 1035 1094 1156 1217 1277 1368 1551


MOD1-H21 1296 1332 1363 1424 1484 1545 1606 1690 1955

MOD1-H22 1417 1448 1484 1545 1606 1667 1727 1819 2084

OPEN URETHANE ARM WITH UPHOLSTERED PAD

MOD1-H31 998 1027 1064 1114 1175 1235 1296 1388 1569

MOD1-H32 1114 1143 1175 1235 1296 1357 1417 1509 1690

OPEN UPHOLSTERED LEATHER WRAPPED ARM

MOD1-H41 1119 1156 1193 1247 1309 1368 1430 1521 1787

MOD1-H42 1242 1277 1309 1368 1430 1490 1551 1642 1908


PRODUCT CODE KEYLine Series Back Style Arm Style Base Style Mechanism

MOD 1 H 1 J 1Modena Management Seating High Back Open Urethane Arm Jury Base Swivel Tilt

2 2Closed Upholstered Arm Knee Tilt

3Open with Upholstered Pad

4Open Leather Arm


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CADENCE | FEATURES

RECLINE ADJUSTMENT

The recline adjustment on the

Cadence series allows a 24 degree

range of motion. The foremost lever

located on the right-hand side (when

you are in the seated position)

engages a device to lock the back in

any position within the chair’s range

of movement. Lowering the lever

locks the back at any position within

the range. Raising the lever releases

the lock and the back will move

freely through the entire range.

BACK HEIGHT ADJUSTMENT(on selected models only)

The back height is adjustable on

selected models of the Cadence

series. The mechanism adjusts the

back while in the seated position.

The adjustable height back has a

4 inch range of movement with an 8

position stop mechanism. Place both

hands on either side of the lower

back cushion and lift and click to the

desired height. Raise the back to the

highest position to release the back

height lock and lower to the first and

lowest position.

SEAT HEIGHT ADJUSTMENT

The rear-most lever located in the

right-hand side (when you are in the

seated position) activates the seat

height adjustment. Pull up on the

lever to adjust seat height up or

down through a range of adjustment

of 3 inches.

BACK TENSION

A hand wheel centrally located near

the front underside of the chair

controls the amount of tension

applied to the back. Turning the

knob clockwise when you are in the

seated position lessens the tension.

Turning the knob counter-clockwise

increases the tension.

ARM HEIGHT(on selected models only)

A trigger release button located

outside and below the armpad

adjusts the arm height. Depress the

trigger to raise arm through its

height range of 3.5 inches and 8

settings. Depress the trigger to raise

the arm, release when desired height

is reached to lock in position.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CADENCE | DIMENSIONS & COM REQUIREMENTS

Overall Overall Overall Seat Height of Width Seat Height Shipping Cube COMWidth Depth Height Height Arms from Floor between Arms Depth Range Weight Yardage

MID BACK Urethane 24.5 26 36.75 17.75 26.75 19.5 19.75 4 43 18 2.3Narrow Width Adjustable 25 26 36.75 17.75 24.25–30.25 19.5 19.75 4 43 18 2.3

Wood & Urethane 24.5 26 36.75 17.75 26.75 19.5 19.75 4 43 18 2.3Wood & Upholstered 24.5 26 36.75 17.75 26.75 19.5 19.75 4 43 18 2.8Completely Upholstered 24.5 26 36.75 17.75 26.75 19.5 19.75 4 43 18 3.0Armless 19.5 26 36.75 17.75 – – 19.75 4 41 18 2.3

Wide Width Urethane 26 26 36.75 17.75 26.75 21 19.75 4 45 18 2.3Adjustable 26.5 26 36.75 17.75 24.25–30.25 21 19.75 4 45 18 2.3Wood & Urethane 26 26 36.75 17.75 26.75 21 19.75 4 45 18 2.3Wood & Upholstered 26 26 36.75 17.75 26.75 21 19.75 4 45 18 2.8Completely Upholstered 26 26 36.75 17.75 26.75 21 19.75 4 45 18 3.0Armless 21 26 36.75 17.75 – – 19.75 4 43 18 2.3

HIGH BACK Urethane 24.5 26 43 17.75 26.75 19.5 19.75 4 46 20 2.5Narrow Width Adjustable 25 26 43 17.75 24.25–30.25 19.5 19.75 4 46 20 2.5

Wood & Urethane 24.5 26 43 17.75 26.75 19.5 19.75 4 46 20 2.5Wood & Upholstered 24.5 26 43 17.75 26.75 19.5 19.75 4 46 20 3.0Completely Upholstered 24.5 26 43 17.75 26.75 19.5 19.75 4 46 20 3.2

Wide Width Urethane 26 26 43 17.75 26.75 21 19.75 4 48 20 2.5Adjustable 26.5 26 43 17.75 24.25–30.25 21 19.75 4 48 20 2.5Wood & Urethane 26 26 43 17.75 26.75 21 19.75 4 48 20 2.5Wood & Upholstered 26 26 43 17.75 26.75 21 19.75 4 48 20 3.0Completely Upholstered 26 26 43 17.75 26.75 21 19.75 4 48 20 3.2

Height measurements are taken with the pneumatic lift (and adjustable arm and back when applicable) in the lowest position. Alldimensions are in inches and approximate and are subject to change without notice. Contact Customer Service if dimensions arecritical.

Please specify wood species and finish when ordering. For a complete list of standard wood finishes please see page 5.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CADENCE | MID BACK


DESCRIPTION/MODEL/FINISHES 1 2 3 4 5 6 7 8 9

URETHANE ARMSCAD1-MW11B 944 993 1035 1166 1236 1298 1398 1634 1781CAD1-MN11BCAD1-MW21BCAD1-MN21BCAD1-MW11W Cherry, Maple,

Walnut, Anigre1122 1170 1210 1342 1415 1468 1575 1812 1952

CAD1-MN11W Cherry, Maple,Walnut, Anigre

CAD1-MW21W Cherry, Maple,Walnut, Anigre


ADJUSTABLE ARMSCAD1-MW15B 908 954 995 1125 1191 1243 1346 1571 1722CAD1-MN15BCAD1-MW25BCAD1-MN25BCAD1-MW15W Cherry, Maple,

Walnut, Anigre1087 1132 1172 1300 1367 1421 1524 1750 1893



CAD1-MN25W Cherry, Maple,Walnut, AnigreORDERING NOTES

CAD-MW25 versions are available with an optional seat slider mechanism at an upcharge of $50 list. Specifying seat slider option may add additional leadtime to production schedules. Please contact Customer Service for more information.

WOOD AND URETHANE ARMCAD1-MW12B 1004 1053 1134 1240 1314 1370 1486 1734 1879CAD1-MN12BCAD1-MW22BCAD1-MN22BCAD1-MW12W Cherry, Maple,

Walnut, Anigre1180 1231 1276 1418 1491 1550 1664 1912 2049



CAD1-MN22W Cherry, Maple,Walnut, AnigreORDERING NOTES

Value Mechanism Option - for a price reduction of $100 per chair, we offer a lower-function mechanism option, which includes full swiveland rearward tilt capability, tilt tension control, and gas lift height adjustment activator.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.

PRODUCT CODE KEYLine Series Back Style Back Adjustment Arm Style Base Style

CAD 1 MW 1 1 WCadence Management Seating Mid Back/Wide Fixed Back Urethane Wood

MN 2 2 BMid Back/Narrow Adjustable Back Wood and Urethane Black Nylon

5 JAdjustable Jury Base


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CADENCE | MID BACK



WOOD AND UPHOLSTERED ARMCAD1-MW13B 1134 1184 1266 1370 1446 1503 1617 1866 2049CAD1-MN13BCAD1-MW23BCAD1-MN23BCAD1-MW13W Cherry, Maple,

Walnut, Anigre1312 1363 1408 1550 1622 1681 1795 2044 2221




COMPLETELY UPHOLSTEREDCAD1-MW14B 1102 1153 1234 1338 1411 1470 1585 1833 2036CAD1-MN14BCAD1-MW24BCAD1-MN24BCAD1-MW14W Cherry, Maple,

Walnut, Anigre1278 1330 1375 1517 1590 1648 1763 2013 2208




ARMLESSCAD1-MW10B 846 893 935 1067 1137 1199 1299 1535 1699CAD1-MN10BCAD1-MW20BCAD1-MN20BCAD1-MW10W Cherry, Maple,

Walnut, Anigre1023 1071 1113 1245 1316 1368 1477 1712 1858




ORDERING NOTESFor Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.Value Mechanism Option - for a price reduction of $100 per chair, we offer a lower-function mechanism option, which includes full swiveland rearward tilt capability, tilt tension control, and gas lift height adjustment activator.


CAD 1 MW 1 0 WCadence Management Seating Mid Back/Wide Fixed Back Armless Wood

MN 2 3 BMid Back/Narrow Adjustable Back Wood and Upholstered Black Nylon

4 JCompletely Upholstered Jury Base


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CADENCE | HIGH BACK



URETHANE ARMSCAD1-HW11B 1026 1089 1136 1277 1363 1422 1550 1818 1977CAD1-HN11BCAD1-HW21BCAD1-HN21BCAD1-HW11W Cherry, Maple,

Walnut, Anigre1205 1266 1314 1456 1541 1600 1727 1995 2148

CAD1-HN11W Cherry, Maple,Walnut, Anigre

CAD1-HW21W Cherry, Maple,Walnut, Anigre


ADJUSTABLE ARMSCAD1-HW15B 986 1046 1093 1231 1311 1368 1491 1750 1911CAD1-HN15BCAD1-HW25BCAD1-HN25BCAD1-HW15W Cherry, Maple,

Walnut, Anigre1165 1224 1271 1408 1489 1548 1670 1926 2081




ORDERING NOTESCAD-HW25 versions are available with an optional seat slider mechanism at an upcharge of $50 list. Specifying seat slider option may add additional leadtime to production schedules. Please contact Customer Service for more information.

WOOD AND URETHANE ARMCAD1-HW12B 1090 1157 1207 1361 1449 1512 1645 1930 2085CAD1-HN12BCAD1-HW22BCAD1-HN22BCAD1-HW12W Cherry, Maple,

Walnut, Anigre1269 1333 1386 1538 1625 1688 1823 2109 2256



CAD1-HN22W Cherry, Maple,Walnut, AnigreORDERING NOTES

Value Mechanism Option - for a price reduction of $100 per chair, we offer a lower-function mechanism option, which includes full swiveland rearward tilt capability, tilt tension control, and gas lift height adjustment activator.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.


CAD 1 HW 1 1 WCadence Management Seating High Back/Wide Fixed Back Urethane Wood

HN 2 2 BHigh

Back/NarrowAdjustable Back Wood and Urethane Black Nylon

5 JAdjustable Jury Base


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CADENCE | HIGH BACK



WOOD AND UPHOLSTERED ARM

CAD1-HW13B 1222 1288 1338 1491 1581 1642 1777 2062 2256

CAD1-HN13B

CAD1-HW23B

CAD1-HN23B


1399 1465 1517 1670 1757 1821 1954 2241 2428




COMPLETELY UPHOLSTERED ARM

CAD1-HW14B 1190 1255 1304 1458 1548 1609 1744 2029 2244

CAD1-HN14B

CAD1-HW24B

CAD1-HN24B


1366 1432 1484 1636 1725 1789 1922 2208 2414




ORDERING NOTESFor Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.Value Mechanism Option - for a price reduction of $100 per chair, we offer a lower-function mechanism option, which includes full swiveland rearward tilt capability, tilt tension control, and gas lift height adjustment activator.


CAD 1 HW 1 3 WCadence Management Seating High Back/Wide Fixed Back Wood and Upholstered Wood

HN 2 4 BHigh

Back/NarrowAdjustable Back Completely Upholstered Black Nylon

JJury Base


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CADENCE



ARMCHAIR

CAD2A Cherry, Maple,Walnut, Anigre

959 1003 1046 1117 1187 1258 1331 1418 1574

DIMENSIONS & COM REQUIREMENTSOverall Overall Overall Seat Height of Width Seat Shipping Cube COMWidth Depth Height Height Arms from Floor between Arms Depth Weight Yardage

ARMCHAIR 22.75 27 36 18.25 26 18.75 18 23 18 1.7

PRODUCT CODE KEYLine Series Chair Style

CAD 2 ACadence Guest Seating Arm Chair


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

RHYTHM | DIMENSIONS & COM REQUIREMENTS

Overall Overall Overall Seat Height of Width Seat Height Shipping Cube COMWidth Depth Height Height Arms from Floor between Arms Depth Range Weight Yardage

MID BACK 90-MB 24 24 37 17 25 19.25 17.5 3 59 18 2.091-MB 24 24 37 17 25 19.25 17.5 3 59 18 2.993-MB 24 24 37 17 25 19.25 17.5 3 59 18 2.098-MB 24 24 37 17 25 19.25 17.5 3 59 18 2.099-MB 24 24 37 17 25 19.25 17.5 3 59 18 2.992-MB 24 24 37 17 25 – 17.5 3 59 18 2.0

HIGH BACK 90-HB 24 24 45 17 25 19.25 17.5 3 63 20 2.291-HB 24 24 45 17 25 19.25 17.5 3 63 20 3.193-HB 24 24 45 17 25 19.25 17.5 3 63 20 2.298-HB 24 24 45 17 25 19.25 17.5 3 63 20 2.299-HB 24 24 45 17 25 19.25 17.5 3 63 20 3.1

BLUES SEATING 1090-AMB 22.5 28 35.5 18.5 25.5 18.25 18.5 – 26 13 1.7

FEATURESBACK TILT

The front-most lever under the seaton your right-hand side activates theback-tilt. When the lever is in theupward most position, the back willrecline freely with a total range ofmotion of 24 degrees. Lowering thelever will lock the back at anyposition in the range, raise the lever torelease recline.

BACK HEIGHT(on applicable models)

The back height adjustment (onapplicable models) is operated whileyou are in a seated position. Placeboth hands on either side of the lowerback cushion and lift and clickincrementally through the sevenposition stop mechanism to thedesired height. The total range ofadjustment is 2.5 inches. Raise theback to the highest position torelease the back height lock andlower to the first and lowestposition.

TILT TENSION

The back tilt tension can be adjustedby turning the knob located directlyunder the front of your seat. Thisadjustment controls the amount oftension applied to the back. Turningthe knob clockwise when you are inthe seated position decreases thetension, turning the knob counter-clockwise increases the tension.

ARM HEIGHT (on applicable models)

A trigger release button locatedoutside and below the armpadadjusts the arm height. Press thetrigger to raise the arm and releaseat desired height to lock the position.The range of adjustment is 2.5inches through eight height settings.

SEAT HEIGHT

The rear-most lever under the seaton your right-hand side adjusts theseat height. When in the seatedposition, pull up on the lever toadjust the seat height up or down.

SEAT DEPTH

The knob to adjust seat depth is atthe base of the back on the right-hand side of the chair when in theseated position. To adjust the back inor out to change the seat depth,rotate the knob in a counter-clockwise direction several turns.Place both hands between the seatand back and push the backoutward. If no movement is felt, theback may be at its furthest position.To confirm this, move the backforward by drawing it in toward theseat. When the back is in the desiredposition, retighten the knob to lock.The total range of adjustment is1.25 inches.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

RHYTHM | MID BACK



BLACK URETHANE ARMS

90-MB 1224 1291 1352 1528 1629 1695 1843 2161 2344

UPHOLSTERED ARMS

91-MB 1288 1369 1448 1630 1736 1822 1973 2270 2534

ADJUSTABLE HEIGHT ARMS AND ADJUSTABLE HEIGHT BACK

93-MB 1224 1291 1352 1528 1629 1695 1843 2161 2344

ADJUSTABLE HEIGHT BACK AND BLACK URETHANE ARMS

98-MB 1224 1291 1352 1528 1629 1695 1843 2161 2344

ADJUSTABLE HEIGHT BACK AND UPHOLSTERED ARMS

99-MB 1288 1369 1448 1630 1736 1822 1973 2270 2534

ARMLESS

92-MB 1119 1185 1245 1422 1521 1590 1738 2056 2238


ORDERING PROCEDURE

To order, please specify thefollowing:

1. Krug product model number2. Fabric name and number

Dimensions are in inches andapproximate. Contact CustomerService if dimensions are critical.

ADJUSTABLE ARMS

The adjustable arms may be adjusted in a vertical range of 3.5″ with total of 6positions, and a total horizontal width range of 3″ (1.5″ per arm).

ADJUSTABLE HEIGHT BACKThe adjustable height back may be adjusted in a vertical range of 2 5/8″, with a totalof 7 positions.

FABRICSSee pages 6 and 9-10 for fabric options and grading information.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

RHYTHM | HIGH BACK



BLACK URETHANE ARMS

90-HB 1339 1421 1488 1683 1793 1892 2064 2429 2629

UPHOLSTERED ARMS

91-HB 1406 1492 1562 1768 1884 1986 2165 2578 2859

ADJUSTABLE HEIGHT ARMS AND ADJUSTABLE HEIGHT BACK

93-HB 1339 1421 1488 1683 1793 1892 2064 2429 2629

ADJUSTABLE HEIGHT BACK AND BLACK URETHANE ARMS

98-HB 1339 1421 1488 1683 1793 1892 2064 2429 2629

ADJUSTABLE HEIGHT BACK AND UPHOLSTERED ARMS

99-HB 1406 1492 1562 1768 1884 1986 2165 2578 2859

BLUESARMCHAIR

1090-AMB 858 929 997 1064 1134 1205 1274 1408 1564

ORDERING NOTESA polished aluminum base is optional on the Rhythm series.Add AL to the model number and $100 list to pricing.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.

ORDERING PROCEDURE




RHYTHMA black molded nylon base with dual wheel casters is standard on Rhythm.Rhythm seating includes a standard gas lift.

ALUMINUM BASEA polished aluminum base is optional on the Rhythm series.Add AL to the model number and $100 list to pricing.

BLUESThe metal frame on the Blues series has a matte black finish.



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

START | FEATURES

TASK SEATINGAdjustable Back Height

The back height is adjustable on all

Start task seating. The mechanism

adjusts the back height while in the

seated position. The adjustable

height back has a 2.5″ range of

movement with a 12 position stop

mechanism. Place both hands on

either side of the lower back cushion

and lift and click to desired height.

Raise the back to the highest

position to release the back height

lock and lower to the first and lowest

position.

Recline Adjustment

The sliding lever under the seat on

the user’s left-hand side activates

the recline option, and allows an 18″range of motion. The chair back can

be locked in the upright position by

sliding the lever toward the rear of

the chair. When in the open position,

the back will recline freely

throughout its entire range.

Seat Pan

The underside of the Start series is

neatly contained in a one-piece

molded seat pan concealing the

mechanism from view.

Seat Height Adjustment

In the seated position, apply

pressure to the button under the

right side of the seat to adjust the

height up or down. The range of

adjustment is 4.5 inches.

Back Tension

A hand wheel located under the rear

of the seat controls the amount of

tension applied to the back.

Adjustable Arms(STA1M22 only)

This user-friendly mechanism easily

allows arm height adjustment from

the seated position. By lifting the

arm it can be set in one of eight

settings. By raising the arm to the

highest position the positive lock is

released and the arm can be brought

back to the lowest position. The

height of the range of adjustment is

2.75″.

GUEST SEATINGFour Leg Base

The four leg base is constructed of

14 gauge steel with a low sheen

black powder coat finish.

Cantilever Base

The cantilever base is constructed of

11 gauge steel with a low sheen

black powder coat finish.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

START | DIMENSIONS

Overall Overall Overall Seat Height of Width Seat Height Shipping CubeWidth Depth Height Height Arms from Floor between Arms Depth Range Weight

TASK SEATING Loop Arm STA1M21 22.25 23 35 17.75 24 24 17 5.5 42 12Adjustable Arm STA1M22 23 23 35 17.75 22.5 18.5 17 5.5 45 12Armless STA1M20 17.5 23 35 17.75 n/a n/a 17 5.5 36 12

GUEST SEATINGCantilever Base Loop Arm STA2MC1 21 24 34.25 18 25.25 18.5 17 n/a 42 12

Armless STA2MC0 21.25 24 34.25 18 n/a n/a 17 n/a 36 12Four Leg Base Loop Arm STA2ML1 19.5 24 35 20.5 26 18.5 17 n/a 39 12

Armless STA2ML0 19.5 24 35 20.5 n/a n/a 17 n/a 33 12

Height measurements are taken with the pneumatic lift (and adjustable arm where applicable) in the lowest position. All dimensionsare in inches and approximate and are subject to change without notice. Contact Customer Service if dimensions are critical.

COM YARDAGETo insure consistent cutting patterns, 1.4 yards are required for a single chair, but will also provide fabric for two chairs.For example, yardage for 25 chairs would be:

24 x 0.7 = 16.81 x 1.4 = 1.4

18.2 yards

Please use the chart below to determine yardage requirements for smaller orders:

Single Fabric Contrasting Seat and BackSelection Fabric SelectionYardage Yardage required Yardage requiredrequired for seat for back

(1) chair 1.4 yards 0.7 yards 0.7 yards(2) chairs 1.4 yards 0.7 yards 0.7 yards(3) chairs 2.1 yards 1.4 yards 1.4 yards(4) chairs 2.8 yards 1.4 yards 1.4 yards(5) chairs 3.5 yards 2.1 yards 2.1 yards(6) chairs 4.2 yards 2.1 yards 2.1 yards

CONTRASTING SEAT AND BACK FABRIC SELECTIONThe base price is determined using the higher grade fabric.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

START



LOOP ARM

STA1M21 696 709 727 746 768 796 824 854 948

ADJUSTABLE ARM

STA1M22 696 709 727 746 768 796 824 854 948

ARMLESS

STA1M20 597 612 627 645 668 698 727 754 853

PRODUCT CODE KEYLine Series Back Style Back Adjustment Arm Style

STA 1 M 2 0Start Task Seating Mid Back Adjustable Height Back Armless

1Loop Arm

2Adjustable Arm


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

START



LOOP ARM WITH CANTILEVER BASE

STA2MC1 639 655 667 687 705 733 758 786 884

ARMLESS WITH CANTILEVER BASE

STA2MC0 568 582 595 613 636 662 690 717 817

LOOP ARM WITH FOUR-LEG BASE

STA2ML1 639 655 667 687 705 733 758 786 884

ARMLESS WITH FOUR-LEG BASE

STA2ML0 568 582 595 613 636 662 690 717 817

PRODUCT CODE KEYLine Series Back Style Base Style Arm Style

STA 2 M C 0Start Guest Seating Mid Back Cantilever Armless

L 1Four Leg Base Loop Arm


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SPIN | FEATURES

Back Angle Adjustment (All models)The back angle adjustment on theSpin series allows for an 21.5degree range of motion. The rearmost lever, located on the right handside seated, when activated allowsthe back to free float and bepositioned in the desired locationand locked when the lever isreleased. The seat remainsstationary in a fixed position.

Recline Adjustment(Synchro control models)The synchro-recline adjustment, onselected models of the Spin series,allows for synchronized motionbetween the seat and back. Therear most lever located on the righthand side seated engages a deviceallowing for 21.5 degree range ofmovement. As the back reclinesthe seat tilts back in a 2:1 ratio.Lowering the lever locks the seatand back at any position within therange.

Back Height Adjustment(All models)The back height is adjustable on allmodels of the Spin series. Themechanism allows for back heightadjustment from a seated position.The back has an adjustment range of2-5/8″ with 8 positions. Place bothhands on either side of the lowerback and lift ratchet mechanism tothe desired height. Raise the back tothe highest position to reset theadjustment feature.

Back Tension(Synchro control models)A hand wheel centrally located nearthe front underside of the chaircontrols the amount of tensionapplied to the back. Turning theknob clockwise, when in a seatedposition, will reduce the tension;turning counter-clockwise willincrease tension.

Seat Depth Adjustment(Seat slider control models)The seat depth is adjustable on selectedmodels of the Spin series. The mechanismallows the seat to slide in and out within arange of 2.5 inches with positional lockingin 0.5″ increments. Adjustment is activatedby pulling upward on the lever located onthe front left side seated. The disengagedlock will permit the forward or rearwardmovement of the seat. To lock the seat,release the lever.

Seat Height Adjustment (All models)The foremost lever located on the right sideseated activates the seat height. Pull up onthe lever to adjust seat height up or downwithin a range of 5.5 inches (7.9 inches forTeller versions).

Arm Height Adjustment (All models)A trigger release button located outsideand below the arm pad adjusts the armheight. Depress the trigger to raise andlower the arm throughout its 2.8″ rangefor pad and loop arms, and 3.2″ range forarticulating arms. To lock it within one ofthe 7 positions, release the trigger.

Arm Width Adjustment (All models)The arm width is adjustable on all modelsof the Spin series. To adjust the arms in oroutward turn the hand wheel located on thearm on the underside of the seat cushioncounter-clockwise to loosen the slidingmechanism. Position the arm to the desiredlocation within its 2″ adjustment range andtighten the hand wheel by turning itclockwise.

Arm Articulation(Articulating arms models)The arm pads can be adjusted to pivotinward or outward. The articulating optionallows the arm to rotate in 12 degreeincrements within a total of 24 degreesinward and 24 degrees outward simply bylifting on the arm pad and turning it to thedesired position.

MECHANISMSAsynchronous ControlThis mechanism allows the seat andback to adjust simultaneously butindependently. The back remainsunder a constant, but modest springtension with the lever activated,allowing the back to be positionedthroughout its adjustment range. Theseat can be adjusted independentlythroughout its tilt range using thesame activation lever. Thismechanism is best suited fortask-intensive work where a rangeof fixed positions may be desired.

Synchro TiltThis mechanism allows the seat and backto tilt and adjust simultaneously in a 2:1ratio. The back can free-float, or be lockedin any position throughout its tilt rangeutilizing the tilt lock lever. This mechanismis best suited for less task intensive workwhere free-floating movement is preferred.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SPIN | DIMENSIONS & COM REQUIREMENTS

Overall Overall Overall Overall Arm Height Seat Height of Width Seat Shipping Cube COMWidth Depth Height Height Range Range Height Arms from Floor between Arms Depth Weight Yardage

Mid Back, Adjustable WidthPad Arm 27.5 22 40.5 5.5 2.8 17.75 25.5 19.5 18 50 20.5 1.9Loop Arm 26 22 40.5 5.5 2.8 17.75 25.5 20.25 18 50 20.5 1.9Articulating Arm 28.5 22 40.5 5.5 3.2 17.75 25.5 19.5 18 50 20.5 1.9Armless 20.75 22 40.5 5.5 – 17.75 n/a n/a 18 46 22.75 1.9

High Back, Adjustable WidthPad Arm 27.5 22 44.5 5.5 2.8 17.75 25.5 19.5 18 53 22.75 2Loop Arm 26 22 44.5 5.5 2.8 17.75 25.5 20.25 18 53 22.75 2Articulating Arm 28.5 22 44.5 3.2 3.2 17.75 25.5 19.5 18 53 22.75 2Armless 20.75 22 44.5 5.5 – 17.75 n/a n/a 18 43 20.5 2

Teller Control, Adjustable WidthPad Arm 27.5 22 45.75 7.9 2.8 24 31.75 19.5 18 53 23.5 1.9Loop Arm 26 22 45.75 7.9 2.8 24 31.75 20.25 18 53 23.5 1.9Articulating Arm 28.5 22 45.75 3.2 3.2 24 31.75 19.5 18 53 23.5 1.9Armless 20.75 22 45.75 7.9 – 24 n/a n/a 18 46 23.5 1.9

All dimensions are in inches and approximate and are subject to change without notice. Contact Customer Service if dimensions arecritical.

Note: 1. Dimensions are taken with the seat, back and arms at their lowest position.2. Arms have a width adjustment range 4 inches in total.3. High and Mid Back versions have a total height adjustment range of 5.5 inches. Teller versions have a total height

adjustment range of 7.9 inches.4. For seat slider versions, add 1.25 inches to height related dimensions.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SPIN | MID BACK



PAD ARM

SPI1M211 770 792 814 850 887 924 959 1003 1177

SPI1M212 735 757 780 817 853 889 925 969 1142

SPI1M213 795 818 840 876 911 947 983 1027 1200

LOOP ARM

SPI1M221 796 819 841 876 912 948 983 1027 1203

SPI1M222 764 785 808 842 879 914 950 995 1167

SPI1M223 821 844 864 902 938 973 1009 1053 1225

ARTICULATING ARM

SPI1M231 804 825 848 885 921 956 993 1037 1210

SPI1M232 770 792 814 850 887 923 959 1003 1177

SPI1M233 830 852 873 908 945 981 1018 1062 1235

ARMLESS

SPI1M201 663 686 706 742 779 815 857 901 1073

SPI1M202 629 651 673 707 744 781 817 860 1035

SPI1M203 686 706 729 766 801 839 873 917 1091

ORDERING NOTESThe Spin series is also available with an optional seat slider mechanism at an upcharge of $50 list.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.Please contact Customer Service for more information.

PRODUCT CODE KEYLine Series Back Style Back Adjustment Arm Style Base Style Mechanism

SPI 1 M 2 0 J 1Spin Task Seating Mid Back Adjustable Back Armless Jury Base Synchro

Mechanism

1 2Pad Arm Asynchro

Mechanism

2 3Loop Arm Teller

Mechanism

3Articulating Arm


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SPIN | HIGH BACK



PAD ARM

SPI1H211 815 844 870 912 953 996 1037 1087 1270

SPI1H212 781 810 835 879 920 961 1003 1052 1235

LOOP ARM

SPI1H221 842 868 895 938 979 1021 1062 1113 1295

SPI1H222 809 834 862 904 945 985 1027 1077 1259

ARTICULATING ARM

SPI1H231 849 878 904 945 986 1029 1070 1120 1302

SPI1H232 815 844 870 911 953 996 1037 1087 1270

ARMLESS

SPI1H201 707 734 764 804 846 887 929 978 1160

SPI1H202 674 701 729 770 812 853 893 944 1127

ORDERING NOTESThe Spin series is also available with an optional seat slider mechanism at an upcharge of $50 list.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.Please contact Customer Service for more information.

PRODUCT CODE KEYLine Series Back Style Back Adjustment Arm Style Base Style Mechanism

SPI 1 H 2 0 J 1Spin Task Seating High Back Adjustable Back Armless Jury Base Synchro

Mechanism

1 2Pad Arm Asynchro

Mechanism

2Loop Arm

3Articulating Arm


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MERIT | MID AND HIGH BACK



MID-BACK, BLACK URETHANE OPEN ARMS

80-OA 720 766 800 904 956 1000 1076 1274 1409

MID-BACK, UPHOLSTERED CLOSED ARMS

80-CA 813 858 891 998 1050 1092 1170 1367 1576

HIGH-BACK, BLACK URETHANE OPEN ARMS

82-OA 824 872 905 1011 1062 1105 1181 1379 1525

HIGH BACK, UPHOLSTERED CLOSED ARMS

82-CA 918 964 998 1102 1156 1197 1275 1472 1690

DIMENSIONS & COM REQUIREMENTSOverall Overall Overall Seat Height of Width Seat Height Shipping Cube COMWidth Depth Height Height Arms from Floor between Arms Depth Range Weight Yardage

80-OA 23 26 33.25 17.75 24 19.75 17.25 3 39 15 1.580-CA 23 26 33.25 17.75 24 19.75 17.25 3 48 17 2.382-OA 23 26 39 17.75 24 19.75 17.25 3 44 15 1.682-CA 23 26 39 17.75 24 19.75 17.25 3 53 17 2.4


ORDERING PROCEDURE




STANDARD FINISHES

For a complete list of standard wood finishes please see page 5.

FABRICS

See pages 6 and 9-10 for fabric options and grading information.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SIERRA | LOW BACK



OPEN WOOD ARM

11-LB Oak 1349 1425 1476 1560 1643 1737 1874 2107 2325

Cherry, Maple,

Walnut, Anigre

1411 1488 1536 1620 1703 1796 1935 2167 2387

Black Nylon 1317 1395 1446 1531 1614 1704 1844 2076 2295

CLOSED WOOD ARM

12-LB Oak 1429 1507 1560 1643 1727 1820 1960 2191 2450

Cherry, Maple,

Walnut, Anigre

1489 1567 1620 1703 1789 1881 2021 2252 2509

Black Nylon 1396 1477 1531 1614 1697 1790 1929 2161 2419

OPEN UPHOLSTERED ARM

14-LB Oak 1349 1425 1476 1560 1643 1737 1874 2107 2325

Cherry, Maple,

Walnut, Anigre

1411 1488 1536 1620 1703 1796 1935 2167 2387

Black Nylon 1317 1395 1446 1531 1614 1704 1844 2076 2295


15-LB Oak 1429 1507 1560 1643 1727 1820 1960 2191 2450

Cherry, Maple,

Walnut, Anigre

1489 1567 1620 1703 1789 1881 2021 2252 2509

Black Nylon 1396 1477 1531 1614 1697 1790 1929 2161 2419


11-LB 23 28 39 18.5 26 19 18 3 60 15 2.812-LB 23 28 39 18.5 26 19 18 3 66 15 3.314-LB 23 28 39 18.5 26 19 18 3 61 15 2.815-LB 23 28 39 18.5 26 19 18 3 63 15 3.3


ORDERING PROCEDURE


1. Krug product model number2. Fabric name and number3. Base style4. Wood finish if required


STANDARD FINISHES


SIERRA

A gas lift is standard on Sierra management chairs.A knee tilt control is optional at a $150 list upcharge.Black Nylon or Wood Bases are available on Sierra.Please specify at time of order.

FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SIERRA | HIGH BACK



OPEN WOOD ARM

11-HB Oak 1395 1481 1535 1628 1719 1820 1976 2232 2466

Cherry, Maple,

Walnut, Anigre

1457 1543 1595 1688 1778 1881 2048 2293 2527

Black Nylon 1365 1450 1504 1595 1688 1790 1946 2201 2436

CLOSED WOOD ARM

12-HB Oak 1477 1564 1620 1714 1805 1907 2061 2319 2576

Cherry, Maple,

Walnut, Anigre

1537 1624 1683 1774 1865 1969 2123 2380 2639

Black Nylon 1448 1534 1590 1683 1774 1881 2031 2288 2547

OPEN UPHOLSTERED ARM

14-HB Oak 1395 1481 1535 1628 1719 1820 1976 2232 2466

Cherry, Maple,

Walnut, Anigre

1457 1543 1595 1688 1778 1881 2048 2293 2527

Black Nylon 1365 1450 1504 1595 1688 1790 1946 2201 2436


15-HB Oak 1477 1564 1620 1714 1805 1907 2061 2319 2576

Cherry, Maple,

Walnut, Anigre

1537 1624 1683 1774 1865 1969 2123 2380 2639

Black Nylon 1448 1534 1590 1683 1774 1881 2031 2288 2547


11-HB 23 28 45 18.5 26 19 18 3 61 18 312-HB 23 28 45 18.5 26 19 18 3 68 18 3.314-HB 23 28 45 18.5 26 19 18 3 62 18 315-HB 23 28 45 18.5 26 19 18 3 64 18 3.4

ORDERING NOTESA knee tilt control is optional at a $150 list upcharge. Please specify at time of order.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.

ORDERING PROCEDURE




STANDARD FINISHES


SIERRA

A gas lift is standard on Sierra management chairs.A knee tilt control is optional at a $150 list upcharge.Please specify at time of order.

FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SIERRA



1190-A Oak 632 687 724 785 846 883 948 1107 1245

Cherry, Maple,Walnut, Anigre

752 813 855 926 997 1036 1114 1295 1432

1195-A Oak 680 726 765 830 892 930 1000 1170 1308


698 752 792 857 921 954 969 1195 1332


1190-A 23 24 35 18 26 19 18.5 22 11 1.51195-A 23 24 35 18 26 19 18.5 21 11 1.5

ORDERING NOTESGanging is optional on all wood arm and side chairs at an upcharge of $50 list per chair.Please specify at time of order.

ORDERING PROCEDURE


1. Krug product model number2. Fabric name and number3. Wood finish


STANDARD FINISHES


GANGING

Ganging is optional on all wood arm and side chairs at an upchargeof $50 list per chair. Please specify at time of order.

FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CHURCHILL



CHU1 Cherry, Maple,

Walnut, Anigre

2977 3043 3109 3241 3371 3591 3635 3875 4263

DIMENSIONS & COM REQUIREMENTSOverall Overall Overall Seat Height of Seat Width Shipping Cube COMWidth Depth Height Height Arms from Floor Depth between Arms Weight Yardage

Churchill 28 31 43–45 17–19 25–27 21 22 75 22.5 4.25

ORDERING NOTESChurchill features a tilt lock mechanism and has a height range of 20′′–223⁄4′′.

ORDERING PROCEDURE




STANDARD FINISHES



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

KENT



MANAGEMENT SEATING

MID BACK

649-MB Cherry, Maple,Walnut, Anigre

990 1046 1087 1221 1291 1343 1385 1700 1856

HIGH BACK

649-HB Cherry, Maple,Walnut, Anigre

1043 1099 1143 1286 1358 1416 1456 1790 1953

GUEST SEATING

650-A Cherry, Maple,Walnut, Anigre

871 903 924 991 1023 1048 1092 1193 1348


649-MB 25 26 37 18 24.5 20 18 3 52 18 1.7649-HB 25 26 43 18 24.5 20 18 3 52 18 1.8650-A 25 23 37.5 19 26 19.75 18.75 – 40 18 1.7

ORDERING NOTESKent 649-HB and 649-MB are available with optional dual wheel brass casters at an upcharge of $100 list.Please specify at time of order.For Jury Base version of this chair, please add a ‘J’ for the base style at the end of the model number and add $50 to the list price.

ORDERING PROCEDURE




STANDARD FINISHESFor a complete list of standard wood finishes please see page 5.

KENTA gas lift is standard on Kent 649-HB and 649-MB management seating.

BRASS CASTERSKent 649-HB and 649-MB are available with optional dual wheel brass castersat an upcharge of $100 list. Please specify at time of order.



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

GUEST SEATING

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

ADDISON



OPEN ARM, OPEN BACK

ADD-2-A-1 Cherry, Oak, Walnut,Anigre, Beech

592 609 625 658 691 724 757 790 856

Maple 639 655 672 705 737 770 803 836 902

OPEN ARM, FULLY UPHOLSTERED BACK


623 652 681 737 794 851 907 964 1077

Maple 664 693 722 779 835 892 949 1005 1119

OPEN ARM, UPPER UPHOLSTERED BACK


613 634 656 698 741 783 825 867 953

Maple 659 681 702 745 787 829 871 914 999

ORDERING NOTEAddison Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


ADD-2-A-1 23.5 24.5 33 18.5 26 20 19 28 13.7 0.7ADD-2-A-2 23.5 24.5 33 18.5 26 20 19 28 13.7 1.2ADD-2-A-3 23.5 24.5 33 18.5 26 20 19 29 13.7 0.9ADD-2-A-4 23.5 24.5 33 18.5 26 20 19 29 13.7 0.7ADD-2-A-5 23.5 24.5 33 18.5 26 20 19 29 13.7 0.7

PRODUCT CODE KEYLine Series Chair Type Chair Style

ADD 2 A 1Addison Guest Seating Arm Chair Open Arm, Open Back

2Open Arm, Fully Upholstered Back

3Open Arm, Upper Upholstered Back

4Open Arm, Horizontal Slat Back

5Open Arm, Solid Wood Back

82 | USA GUEST SEATING

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

ADDISON



OPEN ARM, HORIZONTAL SLAT BACK


603 619 636 668 701 734 767 800 866

Maple 644 660 677 719 743 776 809 842 907

OPEN ARM, SOLID WOOD BACK


608 624 641 674 707 740 773 805 871

Maple 649 665 682 715 748 781 814 847 913

ORDERING NOTEAddison Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.

ORDERING PROCEDURE

To order, please specify the following:

1. Select model number2. Select a finish for the chair frame3. Select a textile or leather


GANGING

Ganging is optional on all wood arm and side chairs at an upcharge of $50 list per chair. Please specifyat time of order.

FABRICS


GUEST SEATING USA | 83

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BLAKE



OPEN ARM, OPEN BACK

BLA-2-A-1 Cherry, Oak, Walnut,Anigre, Beech

541 557 574 607 640 673 706 739 804

Maple 582 598 615 648 681 714 747 780 846

OPEN ARM, FULLY UPHOLSTERED BACK


567 595 624 681 737 794 851 907 1021

Maple 608 637 665 722 779 835 892 949 1062

OPEN ARM, UPPER UPHOLSTERED BACK


561 583 605 647 689 731 774 816 901

Maple 603 624 646 688 730 773 815 857 942

OPEN ARM, VERTICAL SLAT BACK


585 602 618 651 684 717 750 783 849

Maple 623 640 656 689 722 755 788 821 887

ORDERING NOTEBlake Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


BLA-2-A-1 23 24 32 18.5 26 19.75 19 25 12.5 0.7BLA-2-A-2 23 24 32 18.5 26 19.75 19 29 12.5 1.2BLA-2-A-3 23 24 32 18.5 26 19.75 19 27 12.5 0.9BLA-2-A-4 23 24 32 18.5 26 19.75 19 25 12.5 0.7BLA-2-A-5 23 24 32 18.5 26 19.75 19 26 12.5 1.0BLA-2-A-6 23 24 32 18.5 26 19.75 19 39 12.5 1.7BLA-2-A-7 23 24 32 18.5 26 19.75 19 36 12.5 1.8

PRODUCT CODE KEYLine Series Chair Type Chair Style

BLA 2 A 1Blake Guest Seating Arm Chair Open Arm, Open Back

2Open Arm, Fully Upholstered Back

3Open Arm, Upper Upholstered Back

4Open Arm, Vertical Slat Back

5Open Arm, Lower Upholstered Back

6Closed Arm, Lower Upholstered Back

7Closed Arm, Fully Upholstered Back


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BLAKE



OPEN ARM, LOWER UPHOLSTERED BACK


584 608 631 679 726 774 821 868 963

Maple 628 652 676 723 770 818 865 913 1007

CLOSED ARM, LOWER UPHOLSTERED BACK


608 648 688 768 849 929 1009 1090 1250

Maple 654 694 734 815 895 975 1056 1136 1297

CLOSED ARM, FULLY UPHOLSTERED BACK


623 665 708 793 879 964 1050 1135 1306

Maple 664 707 749 834 920 1005 1091 1176 1347

ORDERING NOTEBlake Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.

ORDERING PROCEDURE


1. Select model number2. Select a finish for the chair frame3. Select a textile or leather


GANGING


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO S-LINE



4 LEG BASEDOS2-10 668 700 735 779 833 901 973 1064 1162


DOC2-10 735 767 796 846 901 961 1040 1126 1229


DOS2-11 761 796 826 870 925 992 1070 1156 1252


DOC2-11 840 870 906 948 1004 1070 1143 1235 1332


4 LEG BASE with CastersDOS2-20 725 754 791 833 888 954 1027 1119 1217


DOC2-20 754 791 821 863 918 984 1064 1150 1247


DOS2-21 815 852 883 925 979 1046 1126 1210 1309


DOC2-21 893 925 961 1004 1059 1126 1198 1289 1388


CANTILEVER BASEDOS2-30 742 772 802 852 906 968 1046 1131 1235


DOC2-30 810 846 876 918 973 1040 1119 1205 1301


DOS2-31 925 961 992 1035 1089 1156 1235 1319 1417


DOC2-31 961 998 1027 1070 1126 1193 1272 1357 1454


ORDERING NOTEDorso Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


DOS 2 1 0Dorso S-Line

(Silver Metallic)Guest Seating Four Leg Armless

DOC 2 1Dorso S-Line

(Polished Chrome)Four leg with

CastersFixed Cantilever

3Cantilever


DON 2 1 0Dorso N-Line

(Silver MetallicBase)

Guest Seating Four Leg Armless

2 1Four leg with

CastersFixed Cantilever

3Cantilever


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

DORSO N-LINE



4 LEG BASE

DON2-10 578 609 638 688 742 802 883 968 1070


DON2-11 645 680 711 754 810 876 954 1040 1137


4 LEG BASE with Casters

DON2-20 633 663 694 742 796 858 937 1022 1126


DON2-21 701 733 767 810 863 931 1009 1094 1193


CANTILEVER BASE

DON2-30 645 680 711 754 810 876 954 1040 1137


DON2-31 761 796 826 870 925 992 1070 1156 1252


ORDERING NOTEDorso Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.

DIMENSIONS & COM REQUIREMENTSOverall Overall Seat Height of Width Seat Height Shipping Cube COMWidth Depth Height Arms from Floor between Arms Depth Range Weight Yardage

S-LINE/4LEG Armless 20.75 25.50 18.5 27.5 19.5 19.5 36 32 14 1.3Fixed 24.5 25.50 18.5 27.5 19.5 19.5 36 37 14 1.3

S-LINE/4LEG Armless 20.75 24.75 18.5 27.5 19.5 19.5 36 33 14 1.3with Casters Fixed 24.5 24.75 18.5 27.5 19.5 19.5 36 38 14 1.3

S-LINE/ Armless 20.75 24.75 18.5 27.5 19.5 19.5 36 39 14 1.3Cantilever Base Fixed 24.5 24.75 18.5 27.5 19.5 19.5 36 44 14 1.3

N-LINE/4LEG Armless 20.75 25.50 18.5 27.5 19.5 19.5 34.75 31 14 1.3Fixed 24.5 25.50 18.5 27.5 19.5 19.5 34.75 36 14 1.3

N-LINE/4LEG Armless 20.75 24.75 18.5 27.5 19.5 19.5 34.75 32 14 1.3with Casters Fixed 24.5 24.75 18.5 27.5 19.5 19.5 34.75 37 14 1.3

N-LINE/ Armless 20.75 24.75 18.5 27.5 19.5 19.5 34.75 38 14 1.3Cantilever Base Fixed 24.5 24.75 18.5 27.5 19.5 19.5 34.75 43 14 1.3


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BALI



WOOD SHELL

BAL2A1B Cherry, Beech 526

Black

BAL2A1C Cherry, Beech 580

Chrome

UPHOLSTERED FRONT

BAL2A2B Cherry, Beech 714 739 773 809 845 886 933 980 1058

Black

BAL2A2C Cherry, Beech 786 815 845 880 915 963 1009 1063 1145

Chrome

UPHOLSTERED SEAT/WOOD BACK


Black


Chrome

ORDERING NOTESBali Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.Bali Guest Chairs are available with a removable upholstered back cover at an upcharge of $30 list per chair.


WOOD SHELL 23.25 23 34.25 17.25 26 19.5 18 30 15.3 –

UPHOLSTERED FRONT 23.25 23 34.25 18.11 26 19.5 17 30 15.3 0.8

UPHOLSTERED SEAT/WOOD BACK 23.25 23 34.25 18.25 26 19.5 18 30 15.3 0.4

ORDERING NOTESGanging is optional on all wood arm and side chairs at an upcharge of $50 list per chair. Please specify at time of order.

When used with Caddie (stacking cart), Bali stacks to a maximum of 12 chairs high, and 6 high without Caddie. Caddie is available at $845 list. Pleasecontact Customer Service for more information.

PRODUCT CODE KEYLine Series Style Chair Style Back Leg Style

BAL 2 A 1 BBali Guest Seating Arm Chair Wood Black

2 CUpholstered Front Chrome

3Upholstered Seat Cushion


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

KITA



OPEN ARM, FULL WIDTH UPHOLSTERED BACK

1320-OA Oak 779 812 837 895 933 963 1017 1139 1231


834 867 892 950 986 1017 1070 1195 1286

CLOSED ARM, FULL WIDTH UPHOLSTERED BACK

1320-CA Oak 1012 1058 1088 1164 1213 1251 1319 1482 1645


1085 1129 1159 1236 1286 1322 1392 1552 1716

3/4 WIDTH UPHOLSTERED BACK

1321-A Oak 779 812 837 895 933 963 1017 1139 1231


834 867 892 950 986 1017 1070 1195 1286

ORDERING NOTEKita Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.

ORDERING PROCEDURE




STANDARD FINISHES


GANGING


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

KITA



SLAT BACK

1322-A Oak 796 826 850 902 932 952 998 1096 1168


867 900 918 972 1003 1023 1067 1165 1239

SHOJI BACK

1323-A Oak 747 778 809 840 872 906 947 1020 1092


823 853 872 924 954 972 1021 1118 1191

ORDERING NOTEKita Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


1320-OA 22 24 32 18.5 26 18.75 19 25 12 1

1320-CA 22 24 32 18.5 26 18.75 19 25 12 1.8

1321-A 22 24 32 18.5 26 18.75 19 25 12 1

1322-A 22 24 32 18.5 26 18.75 19 26 12 0.8*

1323-A 22 24 32 18.5 26 18.75 19 26 12 0.8*

ORDERING PROCEDURE




STANDARD FINISHES


FABRICS


*COM yardage required for 2 chairs is 1.1 yards.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SPENCE



SLAT BACK

1400 Oak 753 795 850 905 970 1041 1114 1207 1272


844 887 941 996 1058 1129 1203 1293 1357

SLAT & UPHOLSTERED BACK

1401 Oak 777 820 876 931 999 1073 1145 1244 1335


867 913 970 1025 1089 1163 1239 1332 1424

SPLIT UPHOLSTERED BACK

1402 Oak 791 834 892 950 1017 1093 1168 1269 1381


885 931 986 1045 1112 1184 1263 1358 1472

FULL UPHOLSTERED BACK

1403 Oak 797 845 901 959 1026 1103 1180 1278 1416


892 940 999 1054 1120 1197 1274 1369 1508

ORDERING NOTESpence Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


1400 22 24 33 18 27 18 20 21 13 0.7

1401 22 24 33 18 27 18 20 22 13 1.0

1402 22 24 33 18 27 18 20 22 13 1.25

1403 22 24 33 18 27 18 20 23 13 1.5

ORDERING PROCEDURE


1. Select a model number2. Select a finish for the chair frame3. Select a textile or leather


STANDARD FINISHES


GANGING

Ganging is available on all wood arm and side chairs at an upcharge of $50 list per chair. Please specifyat time of order.

FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

ICON



OPEN ARM, OPEN BACK

1051-A Oak 798 854 891 984 1064 1109 1203 1325 1462


846 904 946 1044 1130 1176 1274 1406 1544

OPEN ARM, CLOSED BACK

1061-OA Oak 798 854 891 984 1064 1109 1203 1325 1462


846 904 946 1044 1130 1176 1274 1406 1544

CLOSED ARM, CLOSED BACK

1061-CA Oak 900 953 991 1100 1183 1242 1341 1474 1631


952 1011 1051 1167 1255 1316 1422 1565 1722

ORDERING NOTEIcon Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


1051-A 22.5 25 33 18.5 26 18.25 17.25 20 11 1.5

1061-OA 22.5 25 33 18.5 26 18.25 17.25 20 11 1.5

1061-CA 22.5 25 33 18.5 26 18.25 17.25 22 11 1.7

ORDERING PROCEDURE




STANDARD FINISHES


ICON

Add $100 list for optional contrasting arm detail on Icon seating.

FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

EVANS



SINGLE PANEL, WOOD BACK

1010 Cherry, Maple,Walnut, Anigre

858 902 951 1011 1082 1152 1235 1349 1412

SINGLE PANEL, WOOD BACK, HALF CIRCLE DETAIL


889 937 982 1046 1115 1185 1269 1381 1447

DOUBLE PANEL, WOOD BACK


905 948 999 1059 1129 1198 1280 1397 1379

SINGLE PANEL, UPHOLSTERED FRONT


966 1014 1062 1119 1181 1244 1313 1434 1409

ORDERING NOTESEvans Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.Evans Guest Chairs are available with a removable upholstered back cover at an upcharge of $30 list per chair.

ORDERING PROCEDURE




STANDARD FINISHES


GANGING


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

EVANS



UPHOLSTERED INSET PANEL


930 978 1030 1091 1139 1206 1284 1406 1516

FULLY UPHOLSTERED BACK


905 948 999 1059 1129 1198 1280 1397 1507

ORDERING NOTESEvans Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.Evans Guest Chairs are available with a removable upholstered back cover at an upcharge of $30 list per chair.


1 chair 2 chairs

1010 23.75 23 34 18.5 26 18.75 18.25 22 12 0.7 0.7

1011 23.75 23 34 18.5 26 18.75 18.25 22 12 0.7 0.7

1012 23.75 23 34 18.5 26 18.75 18.25 22 12 0.7 0.7

1013 23.75 23 34 18.5 26 18.75 18.25 22 12 0.7 1.2

1014 23.75 23 34 18.5 26 18.75 18.25 22 12 1.2 1.9

1015 23.75 23 34 18.5 26 18.75 18.25 22 12 1.2 1.9

ORDERING PROCEDURE




STANDARD FINISHES


GANGING


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

OVAL



SLAT BACK

1242-A Oak 840 889 930 951 972 1000 1043 1115 1179


1017 1069 1106 1130 1150 1178 1221 1291 1357

CLOSED UPHOLSTERED BACK

1240-A Oak 873 926 964 1003 1043 1096 1176 1309 1417


1023 1077 1115 1155 1194 1247 1325 1457 1567

OPEN UPHOLSTERED BACK

1241-A Oak 822 875 913 947 982 1026 1097 1210 1319


961 1023 1069 1107 1150 1200 1284 1416 1544

ORDERING NOTEOval Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


1 chair 2 chairs

1242-A 23 23 33 18 26 18.25 18.5 21 12 0.7 1.2

1240-A 23 23 33 18 26 18.25 18.5 23 12 1.2 2.1

1241-A 23 23 33 18 26 18.25 18.5 24 12 1.2 2.3

ORDERING PROCEDURE




STANDARD FINISHES


GANGING


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SIERRA



STANDARD BACK

1190-A Oak 632 687 724 785 846 883 948 1107 1245


752 813 855 926 997 1036 1114 1295 1432

SCALLOPED BACK

1195-A Oak 680 726 765 830 892 930 1000 1170 1308


698 752 792 857 921 954 969 1195 1332

ORDERING NOTESierra Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


1190-A 23 24 35 18 26 19 18.5 22 11 1.5

1195-A 23 24 35 18 26 19 18.5 21 11 1.5

ORDERING PROCEDURE




STANDARD FINISHES


GANGING


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

TUSK



OPEN BACK, OPEN ARM

1070-A Oak 758 815 853 980 1037 1076 1165 1370 1509


840 885 921 1050 1105 1149 1236 1426 1563

CLOSED BACK, OPEN ARM

1071-OA Oak 773 825 864 993 1050 1091 1178 1369 1507


853 899 935 1061 1118 1159 1250 1437 1575

CLOSED BACK, CLOSED ARM

1071-CA Oak 867 944 1006 1122 1181 1233 1332 1575 1740


947 1022 1087 1203 1259 1312 1409 1650 1816

STACKING

1072 Oak 773 825 864 993 1050 1091 1178 1369 1507


853 899 935 1061 1118 1159 1250 1437 1575

ORDERING NOTETusk Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


1070-A 22.5 25 31.5 18 25 19.5 17 20 11 1.5

1071-OA 22.5 25 31.5 18 25 19.5 17 22 11 1.5

1071-CA 22.5 25 31.5 18 25 19.5 17 26 11 1.8

1072 22.5 25 31.5 18 25 19.5 17 21 11 1.5

ORDERING PROCEDURE




STANDARD FINISHESFor a complete list of standard wood finishes please see page 5.GANGINGGanging is optional on all wood arm and side chairs at an upcharge of $50 list per chair. Please specifyat time of order.FABRICSSee pages 6 and 9-10 for fabric options and grading information.STACKINGWhen used with Caddie (stacking cart) the 1072 stacks to a maximum of 8 chairs high (4 high withoutCaddie). Caddie is available at $845 list. Please contact Customer Service for more information.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

RICHMOND



OPEN ARM, OPEN BACK

2451-OA Oak 709 780 833 865 902 951 1021 1139 1269


735 808 859 895 932 979 1047 1165 1293

OPEN ARM, CLOSED BACK

2461-OA Oak 746 815 865 904 940 993 1069 1194 1321


772 841 892 932 968 1021 1096 1221 1349

CLOSED ARM, CLOSED BACK

2461-CA Oak 907 980 1030 1082 1131 1197 1299 1469 1633


934 1005 1054 1105 1157 1222 1324 1492 1656

ORDERING NOTERichmond Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


2451-OA 23 24 33 18 26.5 20.25 17.25 23 11 1.4

2461-OA 23 24 33 18 26.5 20.25 17.25 24 11 1.4

2461-CA 23 24 33 18 26.5 20.25 17.25 26 11 1.8

ORDERING PROCEDURE




STANDARD FINISHES


GANGING


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

ESCORT



OPEN ARM

1120-OA Oak 563 655 740 826 917 1004 1093 1272 1407


585 674 762 849 939 1026 1115 1290 1429

CLOSED ARM

1120-CA Oak 615 703 792 880 967 1054 1142 1321 1494


629 720 808 893 982 1073 1160 1338 1512

SPLIT BACK, OPEN ARM

1121-A Oak 569 666 743 833 920 1011 1097 1274 1402


587 676 765 853 941 1030 1118 1293 1421

ORDERING NOTEEscort Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


1 chair 2 chairs

1120-OA 22.5 24.5 33 18 25.5 18.25 18 18 11 1.5 2.3

1120-CA 22.5 24.5 33 18 25.5 18.25 18 21 11 1.9 3.8

1121-A 22.5 24.5 33 18 25.5 18.25 18 18 11 1.4 2.1

ORDERING PROCEDURE




STANDARD FINISHES


GANGING


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

K 2



ROUND ARM

1020-A Oak 572 626 660 742 813 853 934 1043 1160Cherry, Maple,Walnut, Anigre

641 700 739 832 908 954 1046 1167 1287

BEVELED ARM

1025-A Oak 572 626 660 742 813 853 934 1043 1160Cherry, Maple,Walnut, Anigre

641 700 739 832 908 954 1046 1167 1287

SIDE CHAIR

1020-S Oak 519 572 608 690 758 800 881 991 1109

STACKING

1026-A Oak 602 658 691 780 853 895 980 1096 1213

ORDERING NOTEK2 Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


1 chair 2 chairs

1020-A 22 23 33 18 26 18.25 17.25 22 11 1.3 2.0

1025-A 21 23 33 18 26 18.25 17.25 20 11 1.3 2.0

1020-S 22 23 31.75 18 – – 17.25 22 11 1.3 2.0

1026-A 24 23 33 18 26 18.25 17.25 22 11 1.3 2.0

ORDERING PROCEDURE




STANDARD FINISHESFor a complete list of standard wood finishes please see page 5.GANGINGGanging is optional on all wood arm and side chairs at an upcharge of $50 list per chair. Please specifyat time of order.FABRICSSee pages 6 and 9-10 for fabric options and grading information.STACKINGWhen used with Caddie (stacking cart) the 1026 stacks to a maximum of 8 chairs high. Caddie isavailable at $845 list. Please contact Customer Service for more information.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CADENCE



CAD2A Cherry, Maple,Walnut, Anigre

959 1003 1046 1117 1187 1258 1331 1418 1574


CAD2A 22.75 27 36 18.25 26 18.75 18 23 18 1.7

ORDERING PROCEDURE




STANDARD FINISHES


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BLUES|KENT



1090-AMB 858 929 997 1064 1134 1205 1274 1408 1564

650-A Cherry, MapleWalnut, Anigre

871 903 924 991 1023 1048 1092 1193 1348

ORDERING NOTEKent Guest Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.


1090-AMB 22.5 28 35.5 18.5 25.5 18.75 18.5 26 13 1.7650-A 25 23 37.5 19 26 19.75 18.75 40 18 1.7

ORDERING PROCEDURE




STANDARD FINISHES


BLUES

The metal frame on the Blues series has a matte black finish.

FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MULTI-PURPOSE SEATING

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BALI



WOOD SHELL

BAL2A1B Cherry, Beech 526

Black

BAL2A1C Cherry, Beech 580

Chrome

UPHOLSTERED FRONT


Black


Chrome

UPHOLSTERED SEAT/WOOD BACK


Black


Chrome


WOOD SHELL 23.25 23 34.25 17.25 26 19.5 18 30 15.3 –

UPHOLSTERED FRONT 23.25 23 34.25 18.11 26 19.5 17 30 15.3 0.8

UPHOLSTERED SEAT/WOOD BACK 23.25 23 34.25 18.25 26 19.5 18 30 15.3 0.4

ORDERING NOTESGanging is optional on all wood arm and side chairs at an upcharge of $50 list per chair. Please specify at time of order.When used with Caddie (stacking cart), Bali stacks to a maximum of 12 chairs high, and 6 high without Caddie. Caddie is available at $845 list.Please contact Customer Service for more information.Bali Chairs are available with a removable upholstered seat cover at an upcharge of $50 list per chair.Bali Chairs are available with a removable upholstered back cover at an upcharge of $30 list per chair.

PRODUCT CODE KEYLine Series Style Chair Style Back Leg Style

BAL 2 A 1 BBali Guest Seating Arm Chair Wood Black

2 CUpholstered Front Chrome

3Upholstered Seat Cushion

104 | USA MULTI-PURPOSE SEATING

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CAN CAN



WOOD BACK, UPHOLSTERED SEAT

1040 Cherry, Beech 893 924 953 995 1038 1092 1150 1252 1316

UPHOLSTERED BACK, UPHOLSTERED SEAT

1041 Cherry, Beech 1006 1051 1094 1149 1208 1275 1348 1479 1561

WOOD BACK, WOOD SEAT

1042 Cherry, Beech 853


1 chair 2 chairs

1040 23 23 32 19 26 18.5 18.25 18 11 0.7 0.7

1041 23 23 32 19 26 18.5 18.25 18 11 0.9 0.9

1042 23 23 32 19 26 18.5 18.25 18 11 – –

ORDERING NOTESCan Can chairs are available with a removable upholstered back cover at an upcharge of $30 list per chair.

ORDERING PROCEDURE




CAN CANCan Can Tables can be found in the Krug Conference Price Guide.

GANGINGCan Can seating can be ganged at an upcharge of $25 list. Please specify at time of order.

STACKINGWhen used with Caddie (stacking cart) the Can Can series stacks to a maximum of 5 chairs high.Caddie is available at $845 list. Please contact Customer Service for more information.

METAL FINISHESSpecial finishes on chrome legs are available at a 10% list upcharge. Minimum order quantity forthis option is 25 units (extra lead time is required). Please contact Customer Service for moreinformation.

MULTI-PURPOSE SEATING USA | 105

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

START



ARMLESS WITH CANTILEVER BASE

STA2MC0 568 582 595 613 636 662 690 717 817

LOOP ARM WITH CANTILEVER BASE

STA2MC1 639 655 667 687 705 733 758 786 884

ARMLESS WITH FOUR-LEG BASE

STA2ML0 568 582 595 613 636 662 690 717 817

LOOP ARM WITH FOUR-LEG BASE

STA2ML1 639 655 667 687 705 733 758 786 884

DIMENSIONS & COM REQUIREMENTSOverall Overall Overall Seat Height of Width Seat Height Shipping CubeWidth Depth Height Height Arms from Floor between Arms Depth Range Weight

CANTILEVER BASEArmless STA2MC0 21.25 24 34.25 18 n/a n/a 17 n/a 36 12Loop arm STA2MC1 21 24 34.25 18 25.25 18.5 17 n/a 42 12

FOUR LEG BASEArmless STA2ML0 19.5 24 35 20.5 n/a n/a 17 n/a 33 12Loop arm STA2ML1 19.5 24 35 20.5 26 18.5 17 n/a 39 12

PRODUCT CODE KEY

Line Series Back Style Base Style Arm Style

STA 2 M C 0Start Guest Seating Mid Back Cantilever Armless

L 1Four Leg Base Loop Arm

COM YARDAGE

To insure consistent cutting patterns, 1.4 yards are required for a singlechair, but will also provide fabric for two chairs. For example, yardage for25 chairs would be:

24 x 0.7 = 16.81 x 1.4 = 1.4

18.2 yardsPlease use the chart below to determine yardage requirements for smallerorders:

Single Fabric Contrasting Seat and BackSelection Fabric SelectionYardage Yardage required Yardage requiredrequired for seat for back

(1) chair 1.4 yards 0.7 yards 0.7 yards(2) chairs 1.4 yards 0.7 yards 0.7 yards(3) chairs 2.1 yards 1.4 yards 1.4 yards(4) chairs 2.8 yards 1.4 yards 1.4 yards(5) chairs 3.5 yards 2.1 yards 2.1 yards(6) chairs 4.2 yards 2.1 yards 2.1 yards


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CAPRI



ARM CHAIR

CAP2A1 Cherry, Beech 640

CAP2A2 Cherry, Beech 778 808 834 871 908 950 997 1051 1142




SIDE CHAIR

CAP2S1 Cherry, Beech 590

CAP2S2 Cherry, Beech 724 753 784 821 860 899 937 992 1084


CAP2S4 Cherry, Beech 674


BARSTOOL






CADDIE

CDE6 845

PRODUCT CODE KEY

Line Series Chair Type Chair Style

CAP 2 A 1Capri Guest Seating Arm Chair Wood

5 S 2Barstool Side Chair Fully Upholstered

3Upholstered Seat

Cushion

4Wood with Holes

5Upholstered Seat,Back with Holes

CADDIEWhen used with Caddie, Capri stacks to a maximum of 20 chairshigh (10 high for upholstered versions). Barstool versions cannot bestacked with Caddie.

BARSTOOLThe Capri barstool version is available with arms only. Capribarstool versions are suitable for use with bar heights in the range of40″ to 42″.

REMOVABLE UPHOLSTERED BACK COVER

Capri Chairs are available with a removable upholstered back coverat an upcharge of $30 list per chair.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CAPRI


ARM CHAIRWood with arms 22 22.75 33.75 18.5 27 20.5 17.25 12 13 –Fully upholstered with arms 22 22.75 34 19 27 20.5 17.75 14 13 1.0Upholstered seat with arms 22 22.75 33.75 19 27 20.5 17.75 13 13 0.6

SIDE CHAIRWood 19.75 22.75 33.75 18.5 – – 17.25 12 13 –Fully upholstered 19.75 22.75 34 19 – – 17.75 14 13 1.0Upholstered seat 19.75 22.75 33.75 19 – – 17.75 13 13 0.6

BARSTOOLWood with arms 22 22.75 43.75 29 38.5 20.5 17.25 15 18 –Fully upholstered with arms 22 22.75 44 29.5 38.5 20.5 17.75 17 18 1.0Upholstered seat with arms 22 22.75 43.75 29.5 38.5 20.5 17.75 16 18 0.6

CADDIE 25.5 41 43.75 – – – – 20 17 –

Wood versions only can be packed 2 per carton for a total cube of 13.

When used with Caddie, Capri stacks to a maximum of 20 chairs high (10 high for upholstered versions). Barstool versions may not bestacked with Caddie.

Ganging for Capri is optional at $25 list per chair.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

THELMA

DESCRIPTION/MODEL PRICE

PLASTIC SEAT AND BACK

THE20 149

NOTE: See below to specify colors.

CADDIE

CDE6 845

DIMENSIONS & COM REQUIREMENTSOverall Overall Overall Seat Seat Shipping CubeWidth Depth Height Height Depth Weight

THE20 22 21.75 33.25 17.75 16.75 12 16

CDE6 25.5 41 28.5 – – 20 17

PRODUCT CODE KEYLine Series Style

THE 2 0Thelma Guest Seating Plastic Seat

THELMAThelma (plastic seat and back) is available in: Black, Beige, Peach,Pistachio, Sage and Blue. Please specify a color when ordering. Thelmafeatures a polished chrome frame.NOTE:When Thelma is packed 5 per carton–total cube equals 16.

CADDIEWhen used with Caddie, Thelma stacks to a maximum 30 chairs high.

GANGINGGanging is optional at $25 list per chair.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

LOUISE



PLASTIC SEAT AND BACK

LOU20 131


UPHOLSTERED SEAT

LOU21 197 220 241 274 307 340 372 427 492


CADDIE

CDE6 845

DIMENSIONS & COM REQUIREMENTSOverall Overall Overall Seat Seat Shipping Cube COMWidth Depth Height Height Depth Weight Yardage

LOU20 17.75 21 33.25 18 16.75 10 16 –

LOU21 17.75 21 33.25 18 16.75 10 16 0.7

CDE6 25.5 41 28.5 – – 20 17 –

PRODUCT CODE KEYLine Series Seat Type

LOU 2 0Louise Guest Seating Plastic Seat

1Upholstered Seat

LOUISELouise (plastic seat and back) is available in: Black, Beige, Peach,Pistachio, Sage and Blue. Please specify a color when ordering. Louisefeatures a polished chrome frame.NOTE:When Louise is packed 5 per carton–total cube equals 16.

CADDIEWhen used with Caddie, Louise stacks to a maximum 15 chairs high fornon upholstered models and 12 for upholstered seat models.

GANGINGGanging is optional at $25 list per chair.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BANK OF ENGLAND



WOOD SEAT

177-A Oak, Cherry 784

177-J Oak, CherryJury Base

887

REMOVABLE CUSHION

178-A Oak, Cherry 956 1001 1045 1088 1130 1173 1213 1257 1326


1067 1115 1160 1206 1250 1296 1338 1383 1456

REMOVABLE CUSHION

UPHOLSTERED SEAT

179-A Oak, Cherry 956 1001 1045 1088 1130 1173 1213 1257 1326


1067 1115 1160 1206 1250 1296 1338 1383 1456


177-A 23.5 24.5 31.5 18.5 28.5 19 17 29 11 –

178-A 23.5 24.5 31.5 18.5 28.5 19 17 29 11 0.75

179-A 23.5 24.5 31.5 18.5 28.5 19 17 29 11 0.75

ORDERING NOTESFor Jury Base version of this chair, please select model number ‘177-J’ for Wood Seat, ‘178-J’ for Removable Cushion, or ‘179-J’ forRemovable Cushion Upholstered Seat.

ORDERING PROCEDURE




BANK OF ENGLAND


The Bank of England series is also available as a side chair and as a tilter with a five prong base andcasters. These versions are available only when ordered in contract quantities. Please contact CustomerService for more information.

Jury Bases are not available on KrugExpress.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CLARENDON



SIDE CHAIR

CLA2S Cherry, Maple,Walnut, Anigre

1156 1182 1210 1248 1287 1325 1364 1439 1530

HAMPTONARM CHAIR

187-A Oak 627


681

ARM CHAIR–UPHOLSTERED SEAT

188-A Oak 861 908 954 1001 1047 1091 1138 1208 1299


917 966 1011 1058 1103 1147 1195 1264 1356

SIDE CHAIR

187-S Cherry, Oak,Maple, Walnut,Anigre

563

SIDE CHAIR–UPHOLSTERED SEAT

188-S Cherry, Oak,Maple, Walnut,Anigre

749 796 844 889 935 979 1026 1096 1186


CLA2S 21 24 39 18.5 – – 17 22 19.4 1.0187-A 21 21 33.5 18 25.5 19 16.5 21 12 –187-S 21 21 33.5 18 – – 16.5 21 12 –188-A 21 21 33.5 18.5 25.5 19 16.5 21 12 0.75188-S 21 21 33.5 18.5 – – 16.5 21 12 0.75

ORDERING PROCEDURE




STANDARD FINISHES


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

LINK



2200 Oak 372 416 447 525 565 600 659 748 867

ORDERING NOTESIncludes back, seat, cross rails and connecting hardware.

2209 Oak 311 343 360 402 422 441 469 517 636

ORDERING NOTESIncludes seat, cross rails and connecting hardware.

DESCRIPTION/MODEL/FINISHES PRICE

END ARM FRAME

2201-L Oak Left end frame 135

2201-R Oak Right end frame 135

CENTER CONNECTING ARM FRAME

2202 Oak Connecting arm frame 135

ARM TO TABLE CONNECTING FRAME

2203-L Oak Left arm to table frame 135

2203-R Oak Right arm to table frame 135

DIMENSIONS & COM REQUIREMENTSOverall Overall Overall Height of Width Seat Shipping Cube COMWidth Depth Height Arms from Floor between Arms Depth Weight Yardage

2200 18.75 17 34.75 – 18.25 18 15 2 1.32209 18.75 17 34.75 – 18.25 19 15 2 1.32201-L 1.75 20.5 26 26 – – 3 0.7 –2201-R 1.75 20.5 26 26 – – 3 0.7 –2202 1.75 20.5 26 26 – – 3 0.7 –2203-L 1.75 20.5 26 26 – – 3 0.7 –2203-R 1.75 20.5 26 26 – – 3 0.7 –

ORDERING PROCEDURE





LINK PLANNING DIMENSIONSOverall chair unit: W 21.5″

D 22.5″H 34.75″

Center to center of side frames: W 20″



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

LINK

DESCRIPTION/MODEL/FINISHES PRICE

END ARMLESS FRAME

2204-L Oak Left end frame 95

2204-R Oak Right end frame 95

ORDERING NOTESFor use with an armless seating unit when starting or completing a run of modules.

CENTER CONNECTING ARMLESS FRAME

2205 Oak Center armless frame 95

ORDERING NOTESFor use with connecting seating units where no arm is required between units.

ARMLESS TO TABLE CONNECTING FRAME

2206-L Oak Left frame 95

2206-R Oak Right frame 95

TABLE/BENCH END FRAME

2207-L Oak Left table/bench end frame 85

2207-R Oak Right table/bench end frame 85

2208 Oak Center connecting frame 85

ORDERING NOTESFor use with connecting seating units where no arm is required between units.

DIMENSIONSOverall Overall Overall Height of Shipping CubeWidth Depth Height Arms from Floor Weight

2204-L 1.75 20.5 26 26 3 0.72204-R 1.75 20.5 26 26 3 0.72205 1.13 19.5 26 – 3 0.72206-L 1.13 19.5 26 – 3 0.72206-R 1.13 19.5 26 – 3 0.72207-L 1.13 19.5 17.5 – 3 0.72207-R 1.13 19.5 17.5 – 3 0.72208 1.13 19.5 17.5 – 3 0.7

ORDERING PROCEDURE





LINK PLANNING DIMENSIONSOverall chair unit: W 21.5″

D 22.5″H 34.75″

Center to center of side frames: W 20″



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

LINK

DESCRIPTION/MODEL/TABLE SURFACE PRICE

INLINE TABLE

2210 Oak veneer top 450

2211 Plastic laminate top 483

ORDERING NOTESIncludes table cross rails, corner leg, and connecting hardware.

CORNER TABLE 90° L-TURN




TABLE 45° TURN



ORDERING NOTESIncludes table cross rails and connecting hardware.

DIMENSIONSOverall Overall Overall Shipping CubeWidth Depth Height Weight

2210 18.75 18.75 17.75 10 1.52211 18.75 18.75 17.75 10 1.52212 25.75 25.75 17.75 20 22213 25.75 25.75 17.75 20 22214 26 17.5 17.75 10 1.52215 26 17.5 17.75 10 1.5

ORDERING PROCEDURE




STANDARD FINISHES


TABLES

1″ thick tops with oak veneer or plastic laminate.Please provide name and number of plastic laminate selection for plastic laminate top tables.

FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

LINK

DESCRIPTION/MODEL/TABLE SURFACE PRICE

TABLE FOR X CONFIGURATION



ORDERING NOTESIncludes table cross rails and connecting hardware. Please specify type when ordering.

Type 1 Type 2 Type 3

Face to Face Face Clockwise Face Counter-clockwise

TABLE FOR T CONFIGURATION




Type 1 Type 2

Face to Face, left side Face Clockwise, right side

TABLE FOR DOUBLE T CONFIGURATION



ORDERING NOTESIncludes table cross rails and connecting hardware.

DIMENSIONSOverall Overall Overall Shipping CubeWidth Depth Height Weight

2216 32.75 32.75 17.75 25 32217 32.75 32.75 17.75 25 32218 32.75 25.75 17.75 22 32219 32.75 25.75 17.75 22 32220 65 25.75 17.75 50 62221 65 25.75 17.75 50 6

ORDERING PROCEDURE




STANDARD FINISHES


TABLES

1″ thick tops with oak veneer or plastic laminate.Please provide name and number of plastic laminate selection for plastic laminate top tables.

FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SOFT SEATING

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SUTTON


DESCRIPTION/MODEL/FINISHES 1 2 3 4 5 6 7 8 9ONE-SEATSUT3-1-0-1 Cherry, Oak, Maple,

Walnut, Anigre1318 1438 1577 1790 1922 2067 2243 2677 3214

SUT3-1-0-2 Cherry, Oak, Maple,Walnut, Anigre

1444 1583 1738 1992 2137 2297 2494 2976 3533


1402 1537 1686 1934 2074 2230 2421 2890 3429


1670 1804 1935 2067 2200 2336 2465 2625 3163

TWO-SEATSUT3-2-0-1 Cherry, Oak, Maple,

Walnut, Anigre1763 1869 1981 2118 2277 2434 2900 3291 3977


1961 2080 2203 2357 2531 2708 3040 3661 4366


1905 2019 2139 2288 2457 2629 2950 3555 4239


2169 2306 2444 2613 2784 2951 3121 3339 4022

THREE-SEATSUT3-3-0-1 Cherry, Oak, Maple,

Walnut, Anigre2392 2529 2677 2821 2964 3114 3273 3965 4922


2663 2814 2976 3137 3299 3462 3638 4410 5397


2585 2732 2890 3046 3202 3361 3533 4283 5239


2835 3053 3278 3551 3827 4101 4377 4692 5651


SUT3101 27.5 29.5 30.5 16.75 26 20.25 20.25 85 16.75 3.8SUT3102 27.5 29.5 30.5 16.75 26 20.25 20.25 85 16.75 3.8SUT3111 27.5 29.5 30.5 16.75 26 20.25 20.25 85 16.75 2.8SUT3112 27.5 29.5 30.5 16.75 26 20.25 20.25 85 16.75 2.8SUT3201 47.5 29.5 30.5 16.75 26 40.25 20.25 125 28.5 5.6SUT3202 47.5 29.5 30.5 16.75 26 40.25 20.25 125 28.5 5.6SUT3211 47.5 29.5 30.5 16.75 26 40.25 20.25 125 28.5 4.0SUT3212 47.5 29.5 30.5 16.75 26 40.25 20.25 125 28.5 4.0SUT3301 67.5 29.5 30.5 16.75 26 60.25 20.25 155 41 7.6SUT3302 67.5 29.5 30.5 16.75 26 60.25 20.25 155 41 7.6SUT3311 67.5 29.5 30.5 16.75 26 60.25 20.25 155 41 5.5SUT3312 67.5 29.5 30.5 16.75 26 60.25 20.25 155 41 5.5

PRODUCT CODE KEYSeat Arm/Back Base

Line Series Count Style Style

SUT 3 1 0 1Sutton Soft Seating One-Seat Fully Upholstered

SurroundWood Base

& Legs

2 1 2Two-Seat Wood Surround Metal Base

& Legs

3Three-Seat

STANDARD FINISHES

Oak finishes on wood surround versions are applied on Rift Oak.For a complete list of standard wood finishes please see page 5.

METAL BASE OPTION

Metal base is available in silver metallic only.Note: Rift Oak surround can only be specified with a silver metallic base.

REMOVABLE UPHOLSTERED SEAT COVERS

Sutton Lounge Chairs are available with a removable upholstered seatcover at an upcharge of $100 list per one-seater chair, $200 list pertwo-seater chair and $300 list per three-seater chair.

118 | USA SOFT SEATING

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SERA



ONE-SEAT OPEN ARM

SER3-1-0 Cherry, Maple,Walnut, Anigre

1264 1380 1514 1716 1844 1982 2151 2566 3069

ONE-SEAT CLOSED ARM

SER3-1-1 Cherry, Maple,Walnut, Anigre

1390 1518 1664 1887 2028 2181 2365 2823 3376

TWO 1/2-SEAT OPEN ARM

SER3-2X-0 Cherry, Maple,Walnut, Anigre

1690 1793 1900 2031 2182 2336 2620 3157 3795

TWO 1/2-SEAT CLOSED ARM

SER3-2X-1 Cherry, Maple,Walnut, Anigre

1860 1973 2089 2234 2401 2570 2883 3473 4175


SER310 28.5 28.5 31.5 17.5 24 21.5 19.5 50 23 2.6

SER311 28.5 28.5 31.5 17.5 24 21.5 19.5 50 23 4.3

SER32X0 59 28.5 31.5 17.5 24 52 19.5 100 41 4.4

SER32X1 59 28.5 31.5 17.5 24 52 19.5 100 41 6.1

PRODUCT CODE KEYSeat Arm

Line Series Count Style

SER 3 1 0Sera Soft Seating One-Seat Open Arm

2X 1Two 1/2-Seat Closed Arm

STANDARD FINISHES


METAL DETAILING

Metal leg and arm detailing is available in silver metallic only.

FABRICS


SOFT SEATING USA | 119

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

RIVOLI



ONE-SEAT

RIV3-1 Cherry, Maple,Walnut, Anigre

1358 1496 1641 1859 2000 2150 2333 2784 3276

TWO-SEAT


1833 1946 2061 2202 2367 2531 2841 3423 4106

THREE-SEAT


2491 2629 2784 2933 3083 3238 3402 4124 5080

COMBINATION UPHOLSTERYFor combination upholstery on Rivoli, base price will be determined using the higher grade fabric.Please see the following chart to determine the required yardage per chair section.

Seat & Back UnitWidth

OutbackUnit

Arms(L & R Combined)

RIV3-1 1.9 1.9 2.1

RIV3-2 3 2.7 2.1

RIV3-3 4.5 3.4 2.1

NOTE: Measurements shown are in yards


RIV3-1 29 29.5 34 17.5 25.75 20.63 20.47 55 22 5.0

RIV3-2 49.75 29.5 34 17.5 25.75 40.83 20.47 86 38 7.3

RIV3-3 70 29.5 34 17.5 25.75 61.34 20.47 116 54 9.4

PRODUCT CODE KEYSeat

Line Series Count

RIV 3 1Rivoli Soft Seating One-Seat

2Two-Seat

3Three-Seat


COMBINATION UPHOLSTERYAny or all of the following components can be specified separately incontrasting fabrics:Outback / Arms (combined) / Seat and back (combined)

REMOVABLE UPHOLSTERED SEAT & BACK COVERSRivoli Lounge Chairs are available with a removable upholstered seat coverat an upcharge of $100 list per one-seater chair, $200 list per two-seaterchair and $300 list per three-seater chair.Rivoli Lounge Chairs are available with a removable upholstered back coverat an upcharge of $100 list per one-seater chair, $200 list per two-seaterchair, $300 list per three-seater chair.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CARLYLE BENCH



TWO-SEAT

CAR5-2-0 1083 1137 1192 1247 1305 1363 1422 1498 1607

TWO-SEAT - BUTTON DETAILING

CAR5-2-1 1396 1450 1505 1560 1618 1675 1735 1810 1921

THREE-SEAT

CAR5-3-0 1425 1503 1577 1653 1728 1804 1881 1972 2216

THREE-SEAT - BUTTON DETAILING

CAR5-3-1 1909 1986 2060 2136 2212 2287 2364 2455 2699


CAR5-2-0 54 26.5 17.5 — — — — 75 16 2.4

CAR5-2-1 54 26.5 17.5 — — — — 75 16 2.4

CAR5-3-0 81 26.5 17.5 — — — — 110 25 3.6

CAR5-3-1 81 26.5 17.5 — — — — 110 25 3.6

ORDERING NOTESCarlyle Benches are available with a removable upholstered seat cover at an upcharge of $200 list per bench.

PRODUCT CODE KEYSeat Upholstery


CAR 5 2 0Carlyle Bench Two-Seat Upholstery

Standard

3 1Three-Seat Top Stitching and

Buttons

CARLYLE

Base is available in silver metallic only.

FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

STUDIO



ONE-SEAT

4000-1 1264 1380 1514 1716 1844 1982 2151 2566 3069

TWO-SEAT

4000-2 1690 1793 1900 2031 2182 2336 2620 3157 3795

THREE-SEAT

4000-3 2295 2426 2566 2705 2842 2987 3137 3801 4714

COMBINATION UPHOLSTERYFor combination upholstery on Studio, base pricing will be determined using the higher grade of fabric. Please see the following chartto determine the required yardage per chair section.

Studio Seat Top Back Bottom Back Outside Back Front Deck Arms

4000-1 1 0.7 0.6 0.7 0.4 2.8

4000-2 1.8 1.2 0.8 0.4 0.7 2.8

4000-3 2.5 2 1.2 0.9 1.4 2.8



4000-1 27 28 32.5 17.75 25.25 21.75 19.5 97 22 5.5

4000-2 48.5 28 32.5 17.75 25.25 40.75 19.5 117 29 7.0

4000-3 69.75 28 32.5 17.75 25.25 60.5 19.5 145 55 10.0

ORDERING PROCEDURE


1. Krug product model number2. Fabric name and number3. Color name and number


STANDARD FINISHES


FABRICS


STUDIO

The finish on Studio legs is silver metallic. Other leg finishes may be specified for an additional $250 listper unit. Minimum order quantity for this option is 25 units (extra lead time required). Please contactCustomer Service for more information.

UPHOLSTERED REMOVABLE SEAT & BACK COVERS

Studio Lounge Chairs are available with a removable upholstered seat cover at an upcharge of $100 listper one-seater chair, $200 list per two-seater chair and $300 list per three-seater chair.

Studio Lounge Chairs are available with a removable upholstered back cover at an upcharge of $100 listper one-seater chair, $200 list per two-seater chair and $300 list per three-seater chair.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

STUDIO TASK



WITH CASTERS

STU2111 Black 1750 1861 1988 2185 2303 2430 2586 2985 3488

STU2221 Cherry, Maple,Walnut, Anigre

2001 2112 2240 2436 2556 2682 2838 3237 3740


2153 2265 2392 2588 2706 2835 2990 3388 3891

WITH LEGS

STU2112 Black 2042 2154 2283 2478 2596 2724 2880 3279 3782


2295 2407 2535 2731 2849 2976 3132 3532 4034


2447 2560 2686 2883 3001 3129 3285 3685 4186

ORDERING NOTES: To remove tablet arm, please specify clearly on order and deduct $125 from list price.Studio Task Chairs are available with a removable upholstered seat cover at an upcharge of $100 list per chair.Studio Task Lounge chairs are available with a removable upholstered back cover at an upcharge of $100 list per chair.

COMBINATION UPHOLSTERYFor combination fabric upholstery on Studio Task, base pricing will be determined using the higher grade of fabric. Please see thefollowing chart to determine the required yardage per chair section.

Studio Task Seat Top Back Bottom Back Outside Back Arms

All versions 1 0.7 0.6 0.7 2.8



STU2111 26.75 28.5 32 18 25 21.75 18.75 97 22 5.5

STU2221 26.75 28.5 32 18 25 21.75 18.75 97 22 5.5

STU2321 26.75 28.5 32 18 25 21.75 18.75 97 22 5.5

STU2112 26.75 28.5 32.5 18.5 25.5 21.75 18.75 97 22 5.5

STU2222 26.75 28.5 32.5 18.5 25.5 21.75 18.75 97 22 5.5

STU2322 26.75 28.5 32.5 18.5 25.5 21.75 18.75 97 22 5.5

PRODUCT CODE KEYTablet Shelf Base

Line Series Style Style Style

STU 2 1 1 1Studio Guest Chair Black Tablet Black Shelf Casters

2 2 2Maple Tablet Maple Shelf Legs

3Glass Tablet


STUDIO TASKStudio Task comes with tablet in right arm position as a standard andcan be ordered with tablet in left arm position through special request.Please contact Customer Service for more information.Studio Task (caster versions) comes with 2 rear locking casters. StudioTask legs are silver metallic finish. Other leg finishes may be specifiedfor an additional $250 list per unit. Minimum order quantity for thisoption is 25 units (extra lead time required).Please contact Customer Service for more information.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CARLYLE



ONE-SEAT

CAR311 Cherry, Maple,Walnut, Anigre

2080 2147 2212 2343 2473 2606 2737 2977 3388


2080 2147 2212 2343 2473 2606 2737 2977 3388

TWO-SEAT


2809 2908 3005 3170 3335 3499 3662 4018 4680


2809 2908 3005 3170 3335 3499 3662 4018 4680

THREE-SEAT


3788 3909 4028 4248 4468 4685 4905 5343 6163


3788 3909 4028 4248 4468 4685 4905 5343 6163

ORDERING NOTES: Carlyle Lounge Chairs are available with a removable upholstered seat cover at an upcharge of $100 list per one-seater chair, $200list per two-seater chair and $300 list per three-seater chair.


CAR311 33 30 32 17.5 26 20 22 60 24 4.5

CAR312 33 30 32 17.5 26 20 22 60 24 4.5

CAR321 59.5 30 32 17.5 26 47 22 94 43 7.25

CAR322 59.5 30 32 17.5 26 47 22 94 43 7.25

CAR331 84 30 32 17.5 26 70.5 22 135 62 9.0

CAR332 84 30 32 17.5 26 70.5 22 135 62 9.0

PRODUCT CODE KEYSeat Base


CAR 3 1 1Carlyle Soft Seating One-Seat Wood Base & Legs

2 2Two-Seat Metal Base & Legs

3Three-Seat

STANDARD FINISHES


FABRICS


CARLYLE LOUNGE

Carlyle is available in both wood base and silver metallic base versions.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SLOANE



ONE-SEAT

SLO3-10 1670 1804 1935 2067 2200 2336 2465 2625 3163

SLO3-11 1821 1956 2087 2251 2445 2521 2649 2811 3350

TWO-SEAT

SLO3-20 2169 2306 2444 2613 2784 2951 3121 3339 4022

SLO3-21 2443 2579 2718 2916 3090 3253 3428 3640 4325

THREE-SEAT

SLO3-30 2835 3053 3278 3551 3827 4101 4377 4692 5651

SLO3-31 3108 3328 3552 3857 4132 4404 4684 4997 5956

ORDERING NOTES: Sloan Lounge Chairs are available with a removable upholstered seat cover at an upcharge of $100 list per one-seater chair, $200 listper two-seater chair and $300 list per three-seater chair.


SLO3-10 32.25 30.5 30.75 17.5 26 22.5 20.25 95 19 5.9

SLO3-11 32.25 30.5 30.75 17.5 26 22.5 20.25 95 19 5.9

SLO3-20 54.75 30.5 30.75 17.5 26 45 20.25 143 31 7.5

SLO3-21 54.75 30.5 30.75 17.5 26 45 20.25 143 31 7.5

SLO3-30 77.25 30.5 30.75 17.5 26 67.5 20.25 190 43 10.5

SLO3-31 77.25 30.5 30.75 17.5 26 67.5 20.25 190 43 10.5

PRODUCT CODE KEYSeat Upholstery


SLO 3 1 0Sloane Soft Seating One-Seat Standard

Upholstery

2 1Two-Seat Top Stitching and

Buttons

3Three-Seat

FABRICS


SLOANE

Legs are available in metal with a silver metallic finish only, as shown.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BAXTER



ONE-SEAT UPHOLSTERED BACK

BAX3-11 Cherry, Maple,Walnut, Anigre

1393 1477 1557 1640 1722 1802 1886 1985 2251

ONE-SEAT WOOD RAIL BACK


1526 1610 1690 1773 1856 1937 2020 2119 2384

TWO-SEAT UPHOLSTERED BACK


1833 1946 2061 2202 2367 2531 2841 3423 4106

TWO-SEAT WOOD RAIL BACK


2039 2151 2267 2407 2573 2736 3047 3628 4312

OTTOMAN

BAX5 Cherry, Maple,Walnut, Anigre

466 523 584 643 706 769 833 914 1035


BAX5 23.5 23.5 17 n/a n/a n/a n/a 10 6 1.3BAX3-11 29.5 29.5 35.2 17.75 25.5 23 19.75 49 22 2.9BAX3-12 29.5 29.5 34.7 17.75 25.5 23 19.75 49 22 2.9BAX3-21 51 29.5 35.2 17.75 25.5 44.75 19.75 98 41 4.2BAX3-22 51 29.5 34.7 17.75 25.5 44.75 19.75 98 41 4.2Note: Overall height for BAX3-12 and BAX3-22 is .5’’ taller than BAX3-11 and BAX3-21.

PRODUCT CODE KEYSeat Back


BAX 3 1 1Baxter Guest Chair One-Seat Upholstered Back

Detail

5 2 2Ottoman Two-Seat Wood Back

STANDARD FINISHES


FABRICS



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

GRIFFIN



GRI2 Cherry, Maple,Walnut, Anigre

1698 1763 1829 1949 2069 2189 2321 2901 3335

ORDERING NOTES: Griffin Lounge Chairs are available with a removable upholstered seat cover at an upcharge of $100 listper chair.

MONTEREY



MON 2A Cherry, Maple,Walnut, Anigre

1450 1609 1764 1920 2081 2241 2402 2564 2994

ORDERING NOTES: Monterey Lounge Chairs are available with a removable upholstered seat cover at an upcharge of $100 list per chair.


GRI2 30 29 31 19 23 20 20.5 90 22.5 4.75

MON 2A 30.5 27 31.5 18.25 31 21 20 43 19 4.75

PRODUCT CODE KEYArm

Line Series Chair

GRI 2Griffin Guest Seating

MON 2 AMonterey Guest Seating




EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CELLO



ONE-SEAT

4900-1 Cherry, Maple,Walnut, Anigre

1598 1739 1872 2064 2213 2361 2517 2947 3393

TWO-SEAT


2159 2328 2504 2675 2849 3021 3197 3641 4198

THREE-SEAT


2925 3180 3433 3699 3965 4236 4504 5058 5797

ORDERING NOTES: Cello Lounge Chairs are available with a removable upholstered seat cover at an upcharge of $100 list per one-seater chair, $200 listper two-seater chair and $300 list per three-seater chair.


4900-1 29.5 33 37.5 18 24 21.75 20.5 107 22 5.2

4900-2 52 33 37.5 18 24 44.25 20.5 133 38 6.6

4900-3 74.5 33 37.5 18 24 66.75 20.5 172 54 8.9

ORDERING PROCEDURE




STANDARD FINISHES


FABRICS


CELLO

Cello has fixed seat cushions.Cello series specified in leather features piping on the front face and reverse face of the arms, as well asdouble stitched seams on the back.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

BRIO



ONE-SEAT


1318 1438 1577 1790 1922 2067 2243 2677 3214

TWO-SEAT


1763 1869 1981 2118 2277 2434 2900 3291 3977

THREE-SEAT


2392 2529 2677 2821 2964 3114 3273 3965 4922

ORDERING NOTES: Brio Lounge Chairs are available with a removable upholstered seat cover at an upcharge of $100 list per one-seater chair, $200 listper two-seater chair and $300 list per three-seater chair.


4100-1 31.5 31.5 34 18 26 22.5 20.75 97 22 5.9

4100-2 54 31.5 34 18 26 45 20.75 120 41 7.5

4100-3 76 31.5 34 18 26 67.5 20.75 145 55 10.5

ORDERING PROCEDURE




STANDARD FINISHES


FABRICS


BRIO

Brio has fixed seat cushions.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

TERRA



ONE-SEAT


1358 1496 1641 1859 2000 2150 2333 2784 3276

TWO-SEAT


1833 1946 2061 2202 2367 2531 2841 3423 4106

THREE-SEAT


2491 2629 2784 2933 3083 3238 3402 4124 5080

ORDERING NOTES: Terra Lounge Chairs are available with a removable upholstered seat cover at an upcharge of $100 list per one-seater chair, $200 listper two-seater chair and $300 list per three-seater chair.


4400-1 32 32 34.5 18 26 22.5 20.25 97 22 5.4

4400-2 51 32 34.5 18 26 45 20.25 120 41 7.5

4400-3 75 32 34.5 18 26 67.5 20.25 145 55 10.5

ORDERING NOTESAn optional wood arm is available on Terra at an upcharge of $100 list. Please specify at time of order.

ORDERING PROCEDURE






TERRATerra has fixed seat cushions.

WOOD ARMAn optional wood arm is available on Terra at an upcharge of $100 list. Please specify at time of order.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

FRESCO



ONE-SEAT


1402 1537 1686 1934 2074 2230 2421 2890 3429

TWO-SEAT


1905 2019 2139 2288 2457 2629 2951 3555 4239

THREE-SEAT


2585 2732 2890 3046 3202 3361 3533 4283 5239

ORDERING NOTES: Fresco Lounge Chairs are available with a removable upholstered seat cover at an upcharge of $100 list per one-seater chair, $200list per two-seater chair and $300 list per three-seater chair.


4500-1 29.5 31 33.5 17.5 25.5 21.75 20.5 97 22 5.9

4500-2 52.5 31 33.5 17.5 25.5 44.25 20.5 120 41 7.5

4500-3 75 31 33.5 17.5 25.5 66.75 20.5 145 55 10.5

ORDERING PROCEDURE




STANDARD FINISHES


FABRICS


FRESCO

Fresco has fixed seat cushions.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

OCCASIONAL TABLES

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SUTTON

FINISHES

OAK, CHERRY, MAPLE, DIMENSIONS SHIPPING CUBIC

DESCRIPTION/MODEL LAMINATE WALNUT, ANIGRE W D H WEIGHT FEET

SUTTON SQUARE

SUT4-24-24-16 628 698 24 24 16 48 8

SUT4-24-24-21 658 730 24 24 21 49 10

SUT4-30-30-11 706 784 30 30 11 65 7

SUT4-30-30-16 720 800 30 30 16 69 11

SUT4-48-24-16 813 903 48 24 16 83 14

SUT4-48-24-21 833 925 48 24 21 84 18

SUT4-48-30-11 872 968 48 30 11 96 11

SUT4-48-30-16 891 990 48 30 16 98 15

ORDERING PROCEDURE


1. Select model number2. Select a finish or laminate for the table

STANDARD FINISHES

Sutton is available in Maple, Cherry, Oak, Walnut and Anigre finishes.Oak finishes are available on Rift Oak veneer.For a complete list of standard wood finishes please see page 5.

BASES

Bases are available in silver metallic only.

LAMINATE

Sutton is available in laminate. Please see pricing above.Please see page 13 for laminate chart.Laminate is not available on KrugExpress.

WOOD SPECIES

Actual wood species available: Cherry, Maple, Rift Oak.

134 | USA OCCASIONAL TABLES

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

SERA

FINISHESCHERRY, MAPLE, WALNUT, ANIGRE DIMENSIONS SHIPPING CUBIC

DESCRIPTION/MODEL STYLE 1 STYLE 2 W D H WEIGHT FEET

SERA SQUARE

SER4-18-18-21 850 910 18 18 21 27 6

SER4-24-24-16 904 968 24 24 16 35 8

SER4-24-24-21 923 987 24 24 21 37 10

SER4-30-30-21 970 1038 30 30 21 50 15

SER4-36-36-16 993 1063 36 36 16 62 16

SER4-42-24-16 1022 1093 42 24 16 50 13

ORDERING NOTES: A Style (1 or 2) must be selected and noted clearly on Purchase Order.

ORDERING PROCEDURE


1. Select model number2. Select Style 1 or Style 2.3. Select a finish for the table

CODE DESCRIPTION

STYLE 1 – Book matched veneer topSTYLE 2 – Reverse diamond

patterned veneer top(recommended in a clearor light finish only)

STANDARD FINISHES

Sera is available in Maple, Cherry, Walnut and Anigrefinishes. For a complete list of standard wood finishesplease see page 5.

METAL DETAILING

Metal detailing is available in silver metallic only.

WOOD SPECIES

Actual wood species available: Cherry, Maple,Rift Oak.

OCCASIONAL TABLES USA | 135

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

VIRTU

FINISHESCHERRY, OAK, MAPLE,WALNUT, ANIGRE DIMENSIONS SHIPPING CUBIC

DESCRIPTION/MODEL STYLE 1 W D H WEIGHT FEET

VIRTU SQUARE - FROSTED GLASS TOP

VIR4-18-18-21-1 1004 18 18 21 40 8

VIR4-24-24-16-1 1071 24 24 16 52 13

VIR4-24-24-21-1 1192 24 24 21 52 13

VIR4-30-30-21-1 1447 30 30 21 63 19

VIR4-36-36-16-1 1720 36 36 16 85 27

VIR4-42-42-16-1 1880 42 42 16 95 21

VIR4-48-24-16-1 2049 48 24 16 78 25

VIRTU ROUND - FROSTED GLASS TOP

VIR4-24D-16-1 1162 24 — 16 52 13

VIR4-36D-16-1 2057 36 — 16 85 27

VIR4-24D-21-1 1340 24 — 21 52 13

FINISHESCHERRY, OAK, MAPLE,WALNUT, ANIGRE DIMENSIONS SHIPPING CUBIC

DESCRIPTION/MODEL STYLE 1 STYLE 2 LAMINATE W D H WEIGHT FEET

VIRTU SQUARE - WOOD TOP

VIR4-18-18-21-0 812 870 875 18 18 21 40 8

VIR4-24-24-16-0 850 895 930 24 24 16 52 13

VIR4-24-24-21-0 911 974 990 24 24 21 52 13

VIR4-30-30-21-0 1079 1154 1150 30 30 21 63 19

VIR4-36-36-16-0 1270 1350 1370 36 36 16 85 27

VIR4-42-42-16-0 1850 1940 1950 42 42 16 95 21

VIR4-48-24-16-0 1699 1818 1750 48 24 16 78 25


VIRTU ROUND - WOOD TOP

VIR4-24D-16-0 608 650 700 24 — 16 52 13

VIR4-36D-16-0 1159 1240 1320 36 — 16 85 27

VIR4-24D-21-0 786 841 880 24 — 21 52 13


ORDERING PROCEDURE


1. Select model number.2. Select a finish for the table.3. Select Style 1 or Style 2.

CODE DESCRIPTION



METAL DETAILING

Legs and stanchions are available in silver metalliconly.

GLASS

Glass is available in frosted only. Glass is temperedand 8mm thick. Floats on clear rubber bumpers.

WOOD SPECIES

Actual wood species available: Cherry, Maple,Rift Oak


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PACIFICA COLLECTION | MONTEREY


DESCRIPTION/MODEL STYLE 1 STYLE 2 L W H WEIGHT FEET

MONTEREY SQUARE AND RECTANGULAR

5500-18-18-16 766 824 18 18 16 18 3

5500-18-18-21 773 835 18 18 21 19 4

5500-18-18-29 827 891 18 18 29 20 5

5500-18-24-16 793 853 18 24 16 20 4

5500-18-24-21 805 865 18 24 21 21 5

5500-24-24-16 822 886 24 24 16 26 5

5500-24-24-21 839 901 24 24 21 28 7

5500-24-24-29 880 945 24 24 29 31 10

5500-30-30-16 854 933 30 30 16 34 8

5500-30-30-21 883 947 30 30 21 36 11

5500-36-36-16 903 971 36 36 16 38 14

5500-36-36-21 917 984 36 36 21 40 15

5500-48-24-16 929 1000 48 24 16 46 11

5500-48-24-21 945 1016 48 24 21 48 14

5500-48-24-29 981 1059 48 24 29 50 19


MONTEREY ROUND

5501-18D-16 859 924 18 Dia. – 16 18 3

5501-18D-21 883 947 18 Dia. – 21 20 4

5501-18D-29 967 1039 18 Dia. – 29 22 5

5501-24D-16 912 979 24 Dia. – 16 30 5

5501-24D-21 929 999 24 Dia. – 21 33 7

5501-24D-29 977 1041 24 Dia. – 29 35 10

5501-30D-16 985 1062 30 Dia. – 16 39 11

5501-30D-21 1014 1091 30 Dia. – 21 42 12

5501-36D-16 1163 1251 36 Dia. – 16 41 12

5501-36D-21 1198 1289 36 Dia. – 21 44 15


MONTEREY OVAL

5502-18-24-21 1210 1300 18 24 21 20 5.5

5502-42-24-16 1392 1498 42 24 16 46 9


MONTEREY BOW FRONT

5503-53-15-29 1474 1587 53 15 29 54 13

ORDERING NOTES: Table depth is 15″ at center and 13″ at ends.A Style (1 or 2) must be selected and noted clearly on Purchase Order.

ORDERING PROCEDURE


1. Select model number.2. Select Style 1 or Style 2.3. Select a finish for the table.

Dimensions are in inches and approximate.Contact Customer Service if dimensions arecritical.

CODE DESCRIPTION



STANDARD FINISHESFor a complete list of standard wood finishesplease see page 5.BIRDSEYE MAPLEBookmatched Birdseye Maple Veneer isavailable on Pacifica occasional tables at anupcharge of $50 list per square foot. BirdseyeMaple is recommended in a clear finish only.LAMINATE INLAYOptional laminate inlay available at a 10% listupcharge. Please contact Customer Service formore information. Laminate is not available onKrugExpress.WOOD SPECIESActual wood species available: Cherry, Maple.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PACIFICA COLLECTION | LAGUNA



LAGUNA SQUARE AND RECTANGULAR

5510-18-18-16 690 742 18 18 16 18 3

5510-18-18-21 705 758 18 18 21 19 4

5510-18-18-29 764 820 18 18 29 20 5

5510-18-24-16 716 770 18 24 16 20 4

5510-18-24-21 730 786 18 24 21 21 5

5510-24-24-16 753 809 24 24 16 26 5

5510-24-24-21 768 824 24 24 21 28 7

5510-24-24-29 817 876 24 24 29 31 10

5510-30-30-16 794 855 30 30 16 34 8

5510-30-30-21 810 873 30 30 21 36 11

5510-36-36-16 834 899 36 36 16 38 14

5510-36-36-21 853 915 36 36 21 40 15

5510-48-24-16 864 930 48 24 16 46 11

5510-48-24-21 880 945 48 24 21 48 14

5510-48-24-29 912 979 48 24 29 50 19


LAGUNA ROUND

5511-18D-16 858 923 18 Dia. – 16 18 3

5511-18D-21 881 946 18 Dia. – 21 20 4

5511-18D-29 986 1063 18 Dia. – 29 22 5

5511-24D-16 899 967 24 Dia. – 16 30 5

5511-24D-21 925 996 24 Dia. – 21 33 7

5511-24D-29 998 1065 24 Dia. – 29 35 10

5511-30D-16 946 1018 30 Dia. – 16 39 11

5511-30D-21 963 1032 30 Dia. – 21 42 12

5511-36D-16 971 1044 36 Dia. – 16 41 12

5511-36D-21 1000 1074 36 Dia. – 21 44 15


LAGUNA OVAL

5512-18-24-21 1097 1179 18 24 21 20 5.5

5512-42-24-16 1318 1418 42 24 16 46 9


LAGUNA BOW FRONT

5513-53-15-29 1411 1500 53 15 29 54 13


ORDERING PROCEDURE




CODE DESCRIPTION



STANDARD FINISHESFor a complete list of standard wood finishesplease see page 5.BIRDSEYE MAPLEBookmatched Birdseye Maple Veneer isavailable on Pacifica occasional tables at anupcharge of $50 list per square foot. BirdseyeMaple is recommended in a clear finish only.LAMINATE INLAYOptional laminate inlay available at a 10% listupcharge. Please contact CustomerService for more information.Laminate is not available on KrugExpress.WOOD SPECIESActual wood species available: Cherry, Maple.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PACIFICA COLLECTION | NAPA



NAPA SQUARE AND RECTANGULAR

5520-18-18-16 717 772 18 18 16 18 3

5520-18-18-21 732 787 18 18 21 19 4

5520-18-18-29 792 852 18 18 29 20 5

5520-18-24-16 744 801 18 24 16 20 4

5520-18-24-21 757 817 18 24 21 21 5

5520-24-24-16 770 827 24 24 16 26 5

5520-24-24-21 786 845 24 24 21 28 7

5520-24-24-29 839 901 24 24 29 31 10

5520-30-30-16 802 861 30 30 16 34 8

5520-30-30-21 820 883 30 30 21 36 11

5520-36-36-16 840 903 36 36 16 38 14

5520-36-36-21 859 925 36 36 21 40 15

5520-48-24-16 878 944 48 24 16 46 11

5520-48-24-21 900 968 48 24 21 48 14

5520-48-24-29 967 1038 48 24 29 50 19


NAPA ROUND

5521-18D-16 848 913 18 Dia. – 16 18 3

5521-18D-21 864 930 18 Dia. – 21 20 4

5521-18D-29 951 1022 18 Dia. – 29 22 5

5521-24D-16 876 940 24 Dia. – 16 30 5

5521-24D-21 899 967 24 Dia. – 21 33 7

5521-24D-29 957 1031 24 Dia. – 29 35 10

5521-30D-16 1030 1105 30 Dia. – 16 39 11

5521-30D-21 1051 1129 30 Dia. – 21 42 12

5521-36D-16 1133 1219 36 Dia. – 16 41 12

5521-36D-21 1159 1247 36 Dia. – 21 44 15


NAPA OVAL

5522-18-24-21 1137 1221 18 24 21 20 5.5

5522-42-24-16 1341 1447 42 24 16 46 9


NAPA BOW FRONT

5523-53-15-29 1449 1558 53 15 29 54 13


ORDERING PROCEDURE




CODE DESCRIPTION



STANDARD FINISHESFor a complete list of standard wood finishesplease see page 5.BIRDSEYE MAPLEBookmatched Birdseye Maple Veneer isavailable on Pacifica occasional tables at anupcharge of $50 list per square foot. BirdseyeMaple is recommended in a clear finish only.LAMINATE INLAYOptional laminate inlay available at a 10% listupcharge. Please contact Customer Service formore information. Laminate is not available onKrugExpress.WOOD SPECIESActual wood species available: Cherry, Maple.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PACIFICA COLLECTION | TIBURON



TIBURON SQUARE AND RECTANGULAR

5530-18-18-16 734 789 18 18 16 20 3

5530-18-18-21 747 804 18 18 21 21 4

5530-18-18-29 772 832 18 18 29 23 5

5530-18-24-16 762 820 18 24 16 23 4

5530-18-24-21 774 833 18 24 21 25 5

5530-24-24-16 789 849 24 24 16 28 5

5530-24-24-21 805 865 24 24 21 31 7

5530-24-24-29 854 917 24 24 29 33 10

5530-30-30-16 835 900 30 30 16 36 8

5530-30-30-21 853 915 30 30 21 38 11

5530-36-36-16 880 945 36 36 16 39 14

5530-36-36-21 900 967 36 36 21 42 15

5530-48-24-16 914 982 48 24 16 47 11

5530-48-24-21 935 1005 48 24 21 49 14

5530-48-24-29 968 1041 48 24 29 51 19


TIBURON ROUND

5531-18D-16 880 938 18 Dia. – 16 18 3.5

5531-18D-21 899 956 18 Dia. – 21 20 4.5

5531-18D-29 940 1004 18 Dia. – 29 22 6

5531-24D-16 917 979 24 Dia. – 16 30 6

5531-24D-21 938 1000 24 Dia. – 21 33 7.5

5531-24D-29 999 1064 24 Dia. – 29 35 10.5

5531-30D-16 1046 1117 30 Dia. – 16 39 11

5531-30D-21 1064 1138 30 Dia. – 21 42 12

5531-36D-16 1157 1230 36 Dia. – 16 41 12

5531-36D-21 1172 1251 36 Dia. – 21 44 15


TIBURON OVAL

5532-18-24-21 1162 1250 18 24 21 20 5.5

5532-42-24-16 1371 1477 42 24 16 46 9


TIBURON BOW FRONT

5533-53-15-29 1452 1562 53 15 29 54 13


ORDERING PROCEDURE




CODE DESCRIPTION



STANDARD FINISHESFor a complete list of standard wood finishesplease see page 5.BIRDSEYE MAPLEBookmatched Birdseye Maple Veneer isavailable on Pacifica occasional tables at anupcharge of $50 list per square foot. BirdseyeMaple is recommended in a clear finish only.LAMINATE INLAYOptional laminate inlay available at a 10%list upcharge. Please contact CustomerService for more information.Laminate is not available on KrugExpress.WOOD SPECIESActual wood species available: Cherry, Maple.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

STRATFORD

FINISHES DIMENSIONS SHIPPING CUBIC

DESCRIPTION/MODEL CHERRY, WALNUT L W H WEIGHT FEET

STRATFORD RECTANGULAR, SQUARE, AND ROUND

9800-24-18-21 588 24 18 21 20 6

9800-26-26-21 622 26 26 21 26 9

9800-36D-16 914 36 Dia. – 16 42 12

9800-48-18-16 767 48 18 16 36 9

ORDERING PROCEDURE


1. Select model number.2. Select a finish for the table.


STANDARD FINISHES


STRATFORD FINISHES

Stratford finishes include all standard Cherry and Walnut finishes.

WOOD SPECIES

Actual wood species available: Cherry.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MILLENNIUM

FINISHES

FINISHES CHERRY, MAPLE DIMENSIONS SHIPPING CUBICDESCRIPTION/MODEL OAK WALNUT, ANIGRE L W H WEIGHT FEET

MILLENNIUM SQUARE AND RECTANGULAR

6800-18-18-21 461 530 18 18 21 19 5

6800-18-18-29 485 560 18 18 29 23 9

6800-24-18-21 507 589 24 18 21 20 6

6800-24-24-21 527 602 24 24 21 23 8

6800-26-26-21 549 622 26 26 21 26 9

6800-30-30-16 609 691 30 30 16 34 8

6800-48-18-16 663 768 48 18 16 36 9

6800-48-18-29 800 902 48 18 29 46 15

MILLENNIUM ROUND

6800-24Dia. 762 876 24 Dia. – 21 27 8

6800-30Dia. 805 914 30 Dia. – 16 38 8

6800-36Dia. 873 982 36 Dia. – 16 42 12

MILLENNIUM EDGE DETAIL PROFILES

SEVILLE TORRENS VALEN MADRID BARCELONA

ZAMORA WILLIAMSBURG

An edge detail profile must be selected for Millennium occasional tables.

ORDERING NOTESBookmatched Birdseye Maple Veneer is available on Millennium occasional tables at an upcharge of $50 list per square foot.Birdseye Maple is recommended in a clear finish only.Optional laminate inlay available at a 10% list upcharge. Please contact Customer Service for more information.Laminate is not available on KrugExpress.

ORDERING PROCEDURE


1. Select model number.2. Select a finish for the table.3. Select an edge detail profile.


STANDARD FINISHES


BIRDSEYE MAPLE

Bookmatched Birdseye Maple Veneer is available on Millennium occasionaltables at an upcharge of $50 list per square foot. Birdseye Maple is recommendedin a clear finish only.

LAMINATE INLAY

Optional laminate inlay available at a 10% list upcharge. Please contact CustomerService for more information. Laminate is not available on KrugExpress.

WOOD SPECIES

Actual wood species available: Cherry, Maple, Oak.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

PRADO

FINISHES

CHERRY, MAPLE, WALNUT, ANIGRE DIMENSIONS SHIPPINGCUBIC

DESCRIPTION/MODEL STYLE 1 STYLE 2 LAMINATE L W H WEIGHT FEET

PRADO SQUARE AND RECTANGULAR

5610-18-18-16 842 906 842 18 18 16 40 3

5610-18-18-21 850 918 850 18 18 21 42 4

5610-18-24-16 872 937 872 18 24 16 47 4

5610-18-24-21 886 951 886 18 24 21 49 5

5610-24-24-16 904 973 904 24 24 16 53 5

5610-24-24-21 921 990 921 24 24 21 55 7

5610-30-30-16 938 1025 938 30 30 16 69 8

5610-30-30-21 970 1043 970 30 30 21 72 11

5610-36-36-16 993 1066 993 36 36 16 88 14

5610-36-36-21 1008 1084 1008 36 36 21 90 15

5610-48-24-16 1020 1099 1020 48 24 16 102 11

5610-48-24-21 1038 1117 1038 48 24 21 108 14


PRADO ROUND

5611-18D-16 945 1016 945 18 Dia. – 16 35 3

5611-18D-21 970 1043 970 18 Dia. – 21 37 4

5611-24D-16 1003 1076 1003 24 Dia. – 16 46 5

5611-24D-21 1020 1097 1020 24 Dia. – 21 49 7

5611-30D-16 1086 1166 1086 30 Dia. – 16 59 11

5611-30D-21 1116 1198 1116 30 Dia. – 21 63 12

5611-36D-16 1278 1376 1278 36 Dia. – 16 74 12

5611-36D-21 1318 1418 1318 36 Dia. – 21 79 15


PRADO OVAL

5612-18-24-16 1264 1357 1264 18 24 16 47 5

5612-18-24-21 1332 1430 1332 18 24 21 49 6

5612-42-24-16 1529 1647 1529 42 24 16 102 9

5612-42-24-21 1607 1729 1607 42 24 21 104 14

ORDERING NOTES

Prado comes with silver metallic legs. Legs with special finishes are available at a 10% list upcharge and minimum order quantity of 25 units.Extra lead time is required. Please contact Customer Service for more information.

ORDERING PROCEDURE




CODE DESCRIPTION



STANDARD FINISHES

For a complete list of standard wood finishesplease see page 5.

PRADO

Prado comes with silver metallic legs.Legs with special finishes are available at a 10%list upcharge and minimum order quantity of 25units. Extra lead time is required. Please contactCustomer Service for more information.

WOOD SPECIES

Actual wood species available: Cherry, Maple.


EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

MONDRIAN

FINISHESDIMENSIONS SHIPPING CUBIC

DESCRIPTION/MODEL

CHERRY, MAPLE,

WALNUT, ANIGRE W D H WEIGHT FEET

5550-18-18-21 953 18 18 21 35 5

5550-24-24-21 1129 24 24 21 47 6

5550-30-30-16 1326 30 30 16 57 8

5550-30-30-21 1361 30 30 21 58 13

5550-36-36-16 1629 36 36 16 80 18

5550-36-36-21 1671 36 36 21 85 18

5550-48-24-16 1689 48 24 16 73 16

5550-48-24-21 1733 48 24 21 87 20

ORDERING NOTES

Mondrian tables come with a silver metallic frame.Other painted finishes are available at an upcharge of 10% list (minimum order quantity of 25 units and extra lead time is required).

ORDERING PROCEDURE


1. Select a model number.2. Select a finish for the wood frame.


STANDARD FINISHES


MONDRIAN

Mondrian glass tops are not attached to the frame. Mondrian tables come with asilver metallic frame. Other painted finishes are available at an upcharge of 10%list (minimum order quantity of 25 units and extra lead time is required).

WOOD SPECIES



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

CARLYLE


DESCRIPTION/MODEL

CHERRY, MAPLE,


CAR4-18-18-24 752 18 18 24 30 5.5

CAR4-24-24-22 811 24 24 22 32 9

CAR4-42-21-16 1011 42 21 16 65 9.9

ORDERING PROCEDURE


1. Select model number.2. Select a finish for the table.


STANDARD FINISHES


CARLYLE

The legs on the Carlyle series feature a silver metallic finish.

WOOD SPECIES



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

RATHBURN


DESCRIPTION/MODEL

CHERRY, MAPLE,


ROUND

RAT4-18D-24 997 n/a 18 24 30 5.5

RAT4-24D-24 1210 n/a 24 24 32 9

RAT4-36D-16 1468 n/a 36 16 75 14.3

ORDERING NOTES:Please specify finish of metal spacers for Rathburn tables (see below).

RECTANGULAR

RAT4-54-16-33 1478 54 16 33 45 14.5


SQUARE

RAT4-18-18-22 904 18 18 22 30 5.5

RAT4-27-27-24 1150 27 27 24 32 12


RECTANGULAR/SQUARE

RAT4-42-21-16 1298 42 21 16 65 9.9

RAT4-36-36-16 1397 36 36 16 75 14.3


ORDERING PROCEDURE


1. Select a model number.2. Select a spacer finish for the table.


STANDARD FINISHES


RATHBURN

Rathburn table spacers are available in silver metallic and matte black.

WOOD SPECIES



EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Model Number Page1010 . . . . . . . . . . . . . . . . . . . . . . . . 931011 . . . . . . . . . . . . . . . . . . . . . . . . 931012 . . . . . . . . . . . . . . . . . . . . . . . . 931013 . . . . . . . . . . . . . . . . . . . . . . . . 931014 . . . . . . . . . . . . . . . . . . . . . . . . 941015 . . . . . . . . . . . . . . . . . . . . . . . . 941020-A . . . . . . . . . . . . . . . . . . . . . 1001020-S . . . . . . . . . . . . . . . . . . . . . 1001025-A . . . . . . . . . . . . . . . . . . . . . 1001026-A . . . . . . . . . . . . . . . . . . . . . 1001040 . . . . . . . . . . . . . . . . . . . . . . . 1051041 . . . . . . . . . . . . . . . . . . . . . . . 1051042 . . . . . . . . . . . . . . . . . . . . . . . 1051051-A . . . . . . . . . . . . . . . . . . . . . . 921061-CA . . . . . . . . . . . . . . . . . . . . . 921061-OA . . . . . . . . . . . . . . . . . . . . . 921070-A . . . . . . . . . . . . . . . . . . . . . . 971071-CA . . . . . . . . . . . . . . . . . . . . . 971071-OA . . . . . . . . . . . . . . . . . . . . . 971072 . . . . . . . . . . . . . . . . . . . . . . . . 971090-AMB . . . . . . . . . . . . . . 66, 10211-HB . . . . . . . . . . . . . . . . . . . . . . . 7711-LB . . . . . . . . . . . . . . . . . . . . . . . 761120-CA . . . . . . . . . . . . . . . . . . . . . 991120-OA . . . . . . . . . . . . . . . . . . . . . 991121-A . . . . . . . . . . . . . . . . . . . . . . 991190-A . . . . . . . . . . . . . . . . . . . 78, 961195-A . . . . . . . . . . . . . . . . . . . 78, 9612-HB . . . . . . . . . . . . . . . . . . . . . . . 7712-LB . . . . . . . . . . . . . . . . . . . . . . . 761240-A . . . . . . . . . . . . . . . . . . . . . . 951241-A . . . . . . . . . . . . . . . . . . . . . . 951242-A . . . . . . . . . . . . . . . . . . . . . . 951320-CA . . . . . . . . . . . . . . . . . . . . . 891320-OA . . . . . . . . . . . . . . . . . . . . . 891321-A . . . . . . . . . . . . . . . . . . . . . . 891322-A . . . . . . . . . . . . . . . . . . . . . . 901323-A . . . . . . . . . . . . . . . . . . . . . . 9014-HB . . . . . . . . . . . . . . . . . . . . . . . 7714-LB . . . . . . . . . . . . . . . . . . . . . . . 761400 . . . . . . . . . . . . . . . . . . . . . . . . 911401 . . . . . . . . . . . . . . . . . . . . . . . . 911402 . . . . . . . . . . . . . . . . . . . . . . . . 911403 . . . . . . . . . . . . . . . . . . . . . . . . 9115-HB . . . . . . . . . . . . . . . . . . . . . . . 7715-LB . . . . . . . . . . . . . . . . . . . . . . . 76177-A . . . . . . . . . . . . . . . . . . . . . . 111177-J . . . . . . . . . . . . . . . . . . . . . . . 111178-A . . . . . . . . . . . . . . . . . . . . . . 111178-J . . . . . . . . . . . . . . . . . . . . . . . 111179-A . . . . . . . . . . . . . . . . . . . . . . 111179-J . . . . . . . . . . . . . . . . . . . . . . . 111187-A . . . . . . . . . . . . . . . . . . . . . . 112187-S . . . . . . . . . . . . . . . . . . . . . . 112188-A . . . . . . . . . . . . . . . . . . . . . . 112188-S . . . . . . . . . . . . . . . . . . . . . . 1122200 . . . . . . . . . . . . . . . . . . . . . . . 1132201-L . . . . . . . . . . . . . . . . . . . . . 113

Model Number Page2201-R . . . . . . . . . . . . . . . . . . . . . 1132202 . . . . . . . . . . . . . . . . . . . . . . . 1132203-L . . . . . . . . . . . . . . . . . . . . . 1132203-R . . . . . . . . . . . . . . . . . . . . . 1132204-L . . . . . . . . . . . . . . . . . . . . . 1142204-R . . . . . . . . . . . . . . . . . . . . . 1142205 . . . . . . . . . . . . . . . . . . . . . . . 1142206-L . . . . . . . . . . . . . . . . . . . . . 1142206-R . . . . . . . . . . . . . . . . . . . . . 1142207-L . . . . . . . . . . . . . . . . . . . . . 1142207-R . . . . . . . . . . . . . . . . . . . . . 1142208 . . . . . . . . . . . . . . . . . . . . . . . 1142209 . . . . . . . . . . . . . . . . . . . . . . . 1132210 . . . . . . . . . . . . . . . . . . . . . . . 1152211 . . . . . . . . . . . . . . . . . . . . . . . 1152212 . . . . . . . . . . . . . . . . . . . . . . . 1152213 . . . . . . . . . . . . . . . . . . . . . . . 1152214 . . . . . . . . . . . . . . . . . . . . . . . 1152215 . . . . . . . . . . . . . . . . . . . . . . . 1152216 . . . . . . . . . . . . . . . . . . . . . . . 1162217 . . . . . . . . . . . . . . . . . . . . . . . 1162218 . . . . . . . . . . . . . . . . . . . . . . . 1162219 . . . . . . . . . . . . . . . . . . . . . . . 1162220 . . . . . . . . . . . . . . . . . . . . . . . 1162221 . . . . . . . . . . . . . . . . . . . . . . . 1162451-OA . . . . . . . . . . . . . . . . . . . . . 982461-CA . . . . . . . . . . . . . . . . . . . . . 982461-OA . . . . . . . . . . . . . . . . . . . . . 984000-1 . . . . . . . . . . . . . . . . . . . . . 1224000-2 . . . . . . . . . . . . . . . . . . . . . 1224000-3 . . . . . . . . . . . . . . . . . . . . . 1224100-1 . . . . . . . . . . . . . . . . . . . . . 1294100-2 . . . . . . . . . . . . . . . . . . . . . 1294100-3 . . . . . . . . . . . . . . . . . . . . . 1294400-1 . . . . . . . . . . . . . . . . . . . . . 1304400-2 . . . . . . . . . . . . . . . . . . . . . 1304400-3 . . . . . . . . . . . . . . . . . . . . . 1304500-1 . . . . . . . . . . . . . . . . . . . . . 1314500-2 . . . . . . . . . . . . . . . . . . . . . 1314500-3 . . . . . . . . . . . . . . . . . . . . . 1314900-1 . . . . . . . . . . . . . . . . . . . . . 1284900-2 . . . . . . . . . . . . . . . . . . . . . 1284900-3 . . . . . . . . . . . . . . . . . . . . . 1285500-18-18-16 . . . . . . . . . . . . . . 1375500-18-18-21 . . . . . . . . . . . . . . 1375500-18-18-29 . . . . . . . . . . . . . . 1375500-18-24-16 . . . . . . . . . . . . . . 1375500-18-24-21 . . . . . . . . . . . . . . 1375500-24-24-16 . . . . . . . . . . . . . . 1375500-24-24-21 . . . . . . . . . . . . . . 1375500-24-24-29 . . . . . . . . . . . . . . 1375500-30-30-16 . . . . . . . . . . . . . . 1375500-30-30-21 . . . . . . . . . . . . . . 1375500-36-36-16 . . . . . . . . . . . . . . 1375500-36-36-21 . . . . . . . . . . . . . . 1375500-48-24-16 . . . . . . . . . . . . . . 1375500-48-24-21 . . . . . . . . . . . . . . 1375500-48-24-29 . . . . . . . . . . . . . . 137

Model Number Page5501-18D-16 . . . . . . . . . . . . . . . . 1375501-18D-21 . . . . . . . . . . . . . . . . 1375501-18D-29 . . . . . . . . . . . . . . . . 1375501-24D-16 . . . . . . . . . . . . . . . . 1375501-24D-21 . . . . . . . . . . . . . . . . 1375501-24D-29 . . . . . . . . . . . . . . . . 1375501-30D-16 . . . . . . . . . . . . . . . . 1375501-30D-21 . . . . . . . . . . . . . . . . 1375501-36D-16 . . . . . . . . . . . . . . . . 1375501-36D-21 . . . . . . . . . . . . . . . . 1375502-18-24-21 . . . . . . . . . . . . . . 1375502-42-24-16 . . . . . . . . . . . . . . 1375503-53-15-29 . . . . . . . . . . . . . . 1375510-18-18-16 . . . . . . . . . . . . . . 1385510-18-18-21 . . . . . . . . . . . . . . 1385510-18-18-29 . . . . . . . . . . . . . . 1385510-18-24-16 . . . . . . . . . . . . . . 1385510-18-24-21 . . . . . . . . . . . . . . 1385510-24-24-16 . . . . . . . . . . . . . . 1385510-24-24-21 . . . . . . . . . . . . . . 1385510-24-24-29 . . . . . . . . . . . . . . 1385510-30-30-16 . . . . . . . . . . . . . . 1385510-30-30-21 . . . . . . . . . . . . . . 1385510-36-36-16 . . . . . . . . . . . . . . 1385510-36-36-21 . . . . . . . . . . . . . . 1385510-48-24-16 . . . . . . . . . . . . . . 1385510-48-24-21 . . . . . . . . . . . . . . 1385510-48-24-29 . . . . . . . . . . . . . . 1385511-18D-16 . . . . . . . . . . . . . . . . 1385511-18D-21 . . . . . . . . . . . . . . . . 1385511-18D-29 . . . . . . . . . . . . . . . . 1385511-24D-16 . . . . . . . . . . . . . . . . 1385511-24D-21 . . . . . . . . . . . . . . . . 1385511-24D-29 . . . . . . . . . . . . . . . . 1385511-30D-16 . . . . . . . . . . . . . . . . 1385511-30D-21 . . . . . . . . . . . . . . . . 1385511-36D-16 . . . . . . . . . . . . . . . . 1385511-36D-21 . . . . . . . . . . . . . . . . 1385512-18-24-21 . . . . . . . . . . . . . . 1385512-42-24-16 . . . . . . . . . . . . . . 1385513-53-15-29 . . . . . . . . . . . . . . 1385520-18-18-16 . . . . . . . . . . . . . . 1395520-18-18-21 . . . . . . . . . . . . . . 1395520-18-18-29 . . . . . . . . . . . . . . 1395520-18-24-16 . . . . . . . . . . . . . . 1395520-18-24-21 . . . . . . . . . . . . . . 1395520-24-24-16 . . . . . . . . . . . . . . 1395520-24-24-21 . . . . . . . . . . . . . . 1395520-24-24-29 . . . . . . . . . . . . . . 1395520-30-30-16 . . . . . . . . . . . . . . 1395520-30-30-21 . . . . . . . . . . . . . . 1395520-36-36-16 . . . . . . . . . . . . . . 1395520-36-36-21 . . . . . . . . . . . . . . 1395520-48-24-16 . . . . . . . . . . . . . . 1395520-48-24-21 . . . . . . . . . . . . . . 1395520-48-24-29 . . . . . . . . . . . . . . 1395521-18D-16 . . . . . . . . . . . . . . . . 1395521-18D-21 . . . . . . . . . . . . . . . . 139

Model Number Page5521-18D-29 . . . . . . . . . . . . . . . . 1395521-24D-16 . . . . . . . . . . . . . . . . 1395521-24D-21 . . . . . . . . . . . . . . . . 1395521-24D-29 . . . . . . . . . . . . . . . . 1395521-30D-16 . . . . . . . . . . . . . . . . 1395521-30D-21 . . . . . . . . . . . . . . . . 1395521-36D-16 . . . . . . . . . . . . . . . . 1395521-36D-21 . . . . . . . . . . . . . . . . 1395522-18-24-21 . . . . . . . . . . . . . . 1395522-42-24-16 . . . . . . . . . . . . . . 1395523-53-15-29 . . . . . . . . . . . . . . 1395530-18-18-16 . . . . . . . . . . . . . . 1405530-18-18-21 . . . . . . . . . . . . . . 1405530-18-18-29 . . . . . . . . . . . . . . 1405530-18-24-16 . . . . . . . . . . . . . . 1405530-18-24-21 . . . . . . . . . . . . . . 1405530-24-24-16 . . . . . . . . . . . . . . 1405530-24-24-21 . . . . . . . . . . . . . . 1405530-24-24-29 . . . . . . . . . . . . . . 1405530-30-30-16 . . . . . . . . . . . . . . 1405530-30-30-21 . . . . . . . . . . . . . . 1405530-36-36-16 . . . . . . . . . . . . . . 1405530-36-36-21 . . . . . . . . . . . . . . 1405530-48-24-16 . . . . . . . . . . . . . . 1405530-48-24-21 . . . . . . . . . . . . . . 1405530-48-24-29 . . . . . . . . . . . . . . 1405531-18D-16 . . . . . . . . . . . . . . . . 1405531-18D-21 . . . . . . . . . . . . . . . . 1405531-18D-29 . . . . . . . . . . . . . . . . 1405531-24D-16 . . . . . . . . . . . . . . . . 1405531-24D-21 . . . . . . . . . . . . . . . . 1405531-24D-29 . . . . . . . . . . . . . . . . 1405531-30D-16 . . . . . . . . . . . . . . . . 1405531-30D-21 . . . . . . . . . . . . . . . . 1405531-36D-16 . . . . . . . . . . . . . . . . 1405531-36D-21 . . . . . . . . . . . . . . . . 1405532-18-24-21 . . . . . . . . . . . . . . 1405532-42-24-16 . . . . . . . . . . . . . . 1405533-53-15-29 . . . . . . . . . . . . . . 1405550-18-18-21 . . . . . . . . . . . . . . 1445550-24-24-21 . . . . . . . . . . . . . . 1445550-30-30-16 . . . . . . . . . . . . . . 1445550-30-30-21 . . . . . . . . . . . . . . 1445550-36-36-16 . . . . . . . . . . . . . . 1445550-36-36-21 . . . . . . . . . . . . . . 1445550-48-24-16 . . . . . . . . . . . . . . 1445550-48-24-21 . . . . . . . . . . . . . . 1445610-18-18-16 . . . . . . . . . . . . . . 1435610-18-18-21 . . . . . . . . . . . . . . 1435610-18-24-16 . . . . . . . . . . . . . . 1435610-18-24-21 . . . . . . . . . . . . . . 1435610-24-24-16 . . . . . . . . . . . . . . 1435610-24-24-21 . . . . . . . . . . . . . . 1435610-30-30-16 . . . . . . . . . . . . . . 1435610-30-30-21 . . . . . . . . . . . . . . 1435610-36-36-16 . . . . . . . . . . . . . . 1435610-36-36-21 . . . . . . . . . . . . . . 1435610-48-24-16 . . . . . . . . . . . . . . 143

INDEX

USA | 147

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Model Number Page5610-48-24-21 . . . . . . . . . . . . . . 1435611-18D-16 . . . . . . . . . . . . . . . . 1435611-18D-21 . . . . . . . . . . . . . . . . 1435611-24D-16 . . . . . . . . . . . . . . . . 1435611-24D-21 . . . . . . . . . . . . . . . . 1435611-30D-16 . . . . . . . . . . . . . . . . 1435611-30D-21 . . . . . . . . . . . . . . . . 1435611-36D-16 . . . . . . . . . . . . . . . . 1435611-36D-21 . . . . . . . . . . . . . . . . 1435612-18-24-16 . . . . . . . . . . . . . . 1435612-18-24-21 . . . . . . . . . . . . . . 1435612-42-24-16 . . . . . . . . . . . . . . 1435612-42-24-21 . . . . . . . . . . . . . . 143649-HB . . . . . . . . . . . . . . . . . . . . . . 80649-MB . . . . . . . . . . . . . . . . . . . . . . 80650-A . . . . . . . . . . . . . . . . . . . 80, 1026800-18-18-21 . . . . . . . . . . . . . . 1426800-18-18-29 . . . . . . . . . . . . . . 1426800-24-18-21 . . . . . . . . . . . . . . 1426800-24-24-21 . . . . . . . . . . . . . . 1426800-24Dia. . . . . . . . . . . . . . . . . . 1426800-26-26-21 . . . . . . . . . . . . . . 1426800-30-30-16 . . . . . . . . . . . . . . 1426800-30Dia. . . . . . . . . . . . . . . . . . 1426800-36Dia. . . . . . . . . . . . . . . . . . 1426800-48-18-16 . . . . . . . . . . . . . . 1426800-48-18-29 . . . . . . . . . . . . . . 14280-CA . . . . . . . . . . . . . . . . . . . . . . . 7580-OA . . . . . . . . . . . . . . . . . . . . . . . 7582-CA . . . . . . . . . . . . . . . . . . . . . . . 7582-OA . . . . . . . . . . . . . . . . . . . . . . . 7590-HB . . . . . . . . . . . . . . . . . . . . . . . 6490-MB . . . . . . . . . . . . . . . . . . . . . . . 6591-HB . . . . . . . . . . . . . . . . . . . . . . . 6491-MB . . . . . . . . . . . . . . . . . . . . . . . 6592-MB . . . . . . . . . . . . . . . . . . . . . . . 6593-HB . . . . . . . . . . . . . . . . . . . . . . . 6493-MB . . . . . . . . . . . . . . . . . . . . . . . 6598-HB . . . . . . . . . . . . . . . . . . . . . . . 6498-MB . . . . . . . . . . . . . . . . . . . . . . . 649800-24-18-21 . . . . . . . . . . . . . . 1419800-26-26-21 . . . . . . . . . . . . . . 1419800-36D-16 . . . . . . . . . . . . . . . . 1419800-48-18-16 . . . . . . . . . . . . . . 14199-HB . . . . . . . . . . . . . . . . . . . . . . . 6499-MB . . . . . . . . . . . . . . . . . . . . . . . 64ADD-2-A-1 . . . . . . . . . . . . . . . . . . . 82ADD-2-A-2 . . . . . . . . . . . . . . . . . . . 82ADD-2-A-3 . . . . . . . . . . . . . . . . . . . 82ADD-2-A-4 . . . . . . . . . . . . . . . . . . . 83ADD-2-A-5 . . . . . . . . . . . . . . . . . . . 83BAL2A1B . . . . . . . . . . . . . . . 88, 104BAL2A1C . . . . . . . . . . . . . . . 88, 104BAL2A2B . . . . . . . . . . . . . . . 88, 104BAL2A2C . . . . . . . . . . . . . . . 88, 104BAL2A3B . . . . . . . . . . . . . . . 88, 104BAL2A3C . . . . . . . . . . . . . . . 88, 104BAX3-11 . . . . . . . . . . . . . . . . . . . 126BAX3-12 . . . . . . . . . . . . . . . . . . . 126

Model Number PageBAX3-21 . . . . . . . . . . . . . . . . . . . 126BAX3-22 . . . . . . . . . . . . . . . . . . . 126BAX5 . . . . . . . . . . . . . . . . . . . . . . 126BLA-2-A-1 . . . . . . . . . . . . . . . . . . . 84BLA-2-A-2 . . . . . . . . . . . . . . . . . . . 84BLA-2-A-3 . . . . . . . . . . . . . . . . . . . 84BLA-2-A-4 . . . . . . . . . . . . . . . . . . . 84BLA-2-A-5 . . . . . . . . . . . . . . . . . . . 85BLA-2-A-6 . . . . . . . . . . . . . . . . . . . 85BLA-2-A-7 . . . . . . . . . . . . . . . . . . . 85CAD1-HN11B . . . . . . . . . . . . . . . . 61CAD1-HN11W . . . . . . . . . . . . . . . . 61CAD1-HN12B . . . . . . . . . . . . . . . . 61CAD1-HN12W . . . . . . . . . . . . . . . . 61CAD1-HN13B . . . . . . . . . . . . . . . . 62CAD1-HN13W . . . . . . . . . . . . . . . . 62CAD1-HN14B . . . . . . . . . . . . . . . . 62CAD1-HN14W . . . . . . . . . . . . . . . . 62CAD1-HN15B . . . . . . . . . . . . . . . . 61CAD1-HN15W . . . . . . . . . . . . . . . . 61CAD1-HN21B . . . . . . . . . . . . . . . . 61CAD1-HN21W . . . . . . . . . . . . . . . . 61CAD1-HN22B . . . . . . . . . . . . . . . . 61CAD1-HN22W . . . . . . . . . . . . . . . . 61CAD1-HN23B . . . . . . . . . . . . . . . . 62CAD1-HN23W . . . . . . . . . . . . . . . . 62CAD1-HN24B . . . . . . . . . . . . . . . . 62CAD1-HN24W . . . . . . . . . . . . . . . . 62CAD1-HN25B . . . . . . . . . . . . . . . . 61CAD1-HN25W . . . . . . . . . . . . . . . . 61CAD1-HW11B . . . . . . . . . . . . . . . . 61CAD1-HW11W . . . . . . . . . . . . . . . 61CAD1-HW12B . . . . . . . . . . . . . . . . 61CAD1-HW12W . . . . . . . . . . . . . . . 61CAD1-HW13B . . . . . . . . . . . . . . . . 62CAD1-HW13W . . . . . . . . . . . . . . . 62CAD1-HW14B . . . . . . . . . . . . . . . . 62CAD1-HW14W . . . . . . . . . . . . . . . 62CAD1-HW15B . . . . . . . . . . . . . . . . 61CAD1-HW15W . . . . . . . . . . . . . . . 61CAD1-HW21B . . . . . . . . . . . . . . . . 61CAD1-HW21W . . . . . . . . . . . . . . . 61CAD1-HW22B . . . . . . . . . . . . . . . . 61CAD1-HW22W . . . . . . . . . . . . . . . 61CAD1-HW23B . . . . . . . . . . . . . . . . 62CAD1-HW23W . . . . . . . . . . . . . . . 62CAD1-HW24B . . . . . . . . . . . . . . . . 62CAD1-HW24W . . . . . . . . . . . . . . . 62CAD1-HW25B . . . . . . . . . . . . . . . . 61CAD1-HW25W . . . . . . . . . . . . . . . 61CAD1-MN10B . . . . . . . . . . . . . . . . 60CAD1-MN10W . . . . . . . . . . . . . . . 60CAD1-MN11B . . . . . . . . . . . . . . . . 59CAD1-MN11W . . . . . . . . . . . . . . . 59CAD1-MN12B . . . . . . . . . . . . . . . . 59CAD1-MN12W . . . . . . . . . . . . . . . 59CAD1-MN13B . . . . . . . . . . . . . . . . 60CAD1-MN13W . . . . . . . . . . . . . . . 60CAD1-MN14B . . . . . . . . . . . . . . . . 60

Model Number PageCAD1-MN14W . . . . . . . . . . . . . . . 60CAD1-MN15B . . . . . . . . . . . . . . . . 59CAD1-MN15W . . . . . . . . . . . . . . . 59CAD1-MN20B . . . . . . . . . . . . . . . . 60CAD1-MN20W . . . . . . . . . . . . . . . 60CAD1-MN21B . . . . . . . . . . . . . . . . 59CAD1-MN21W . . . . . . . . . . . . . . . 59CAD1-MN22B . . . . . . . . . . . . . . . . 59CAD1-MN22W . . . . . . . . . . . . . . . 59CAD1-MN23B . . . . . . . . . . . . . . . . 60CAD1-MN23W . . . . . . . . . . . . . . . 60CAD1-MN24B . . . . . . . . . . . . . . . . 60CAD1-MN24W . . . . . . . . . . . . . . . 60CAD1-MN25B . . . . . . . . . . . . . . . . 59CAD1-MN25W . . . . . . . . . . . . . . . 59CAD1-MW10B . . . . . . . . . . . . . . . . 60CAD1-MW10W . . . . . . . . . . . . . . . 60CAD1-MW11B . . . . . . . . . . . . . . . . 59CAD1-MW11W . . . . . . . . . . . . . . . 59CAD1-MW12B . . . . . . . . . . . . . . . . 59CAD1-MW12W . . . . . . . . . . . . . . . 59CAD1-MW13B . . . . . . . . . . . . . . . . 60CAD1-MW13W . . . . . . . . . . . . . . . 60CAD1-MW14B . . . . . . . . . . . . . . . . 60CAD1-MW14W . . . . . . . . . . . . . . . 60CAD1-MW15B . . . . . . . . . . . . . . . . 59CAD1-MW15W . . . . . . . . . . . . . . . 59CAD1-MW20B . . . . . . . . . . . . . . . . 60CAD1-MW20W . . . . . . . . . . . . . . . 60CAD1-MW21B . . . . . . . . . . . . . . . . 59CAD1-MW21W . . . . . . . . . . . . . . . 59CAD1-MW22B . . . . . . . . . . . . . . . . 59CAD1-MW22W . . . . . . . . . . . . . . . 59CAD1-MW23B . . . . . . . . . . . . . . . . 60CAD1-MW23W . . . . . . . . . . . . . . . 60CAD1-MW24B . . . . . . . . . . . . . . . . 60CAD1-MW24W . . . . . . . . . . . . . . . 60CAD1-MW25B . . . . . . . . . . . . . . . . 59CAD1-MW25W . . . . . . . . . . . . . . . 59CAD2A . . . . . . . . . . . . . . . . . . 63, 101CAP2A1 . . . . . . . . . . . . . . . . . . . . 107CAP2A2 . . . . . . . . . . . . . . . . . . . . 107CAP2A3 . . . . . . . . . . . . . . . . . . . . 107CAP2A4 . . . . . . . . . . . . . . . . . . . . 107CAP2A5 . . . . . . . . . . . . . . . . . . . . 107CAP2S1 . . . . . . . . . . . . . . . . . . . . 107CAP2S2 . . . . . . . . . . . . . . . . . . . . 107CAP2S3 . . . . . . . . . . . . . . . . . . . . 107CAP2S4 . . . . . . . . . . . . . . . . . . . . 107CAP2S5 . . . . . . . . . . . . . . . . . . . . 107CAP5A1 . . . . . . . . . . . . . . . . . . . . 107CAP5A2 . . . . . . . . . . . . . . . . . . . . 107CAP5A3 . . . . . . . . . . . . . . . . . . . . 107CAP5A4 . . . . . . . . . . . . . . . . . . . . 107CAP5A5 . . . . . . . . . . . . . . . . . . . . 107CAR311 . . . . . . . . . . . . . . . . . . . . 124CAR312 . . . . . . . . . . . . . . . . . . . . 124CAR321 . . . . . . . . . . . . . . . . . . . . 124CAR322 . . . . . . . . . . . . . . . . . . . . 124

Model Number PageCAR331 . . . . . . . . . . . . . . . . . . . . 124CAR332 . . . . . . . . . . . . . . . . . . . . 124CAR4-18-18-24 . . . . . . . . . . . . . . 145CAR4-24-24-22 . . . . . . . . . . . . . . 145CAR4-42-21-16 . . . . . . . . . . . . . . 145CAR5-2-0 . . . . . . . . . . . . . . . . . . . 121CAR5-2-1 . . . . . . . . . . . . . . . . . . . 121CAR5-3-0 . . . . . . . . . . . . . . . . . . . 121CAR5-3-1 . . . . . . . . . . . . . . . . . . . 121CDE6 . . . . . . . . . . . . . 107, 109, 110CHU1 . . . . . . . . . . . . . . . . . . . . . . . . 79CLA2S . . . . . . . . . . . . . . . . . . . . . 112DEB1-H111B . . . . . . . . . . . . . . . . . 27DEB1-H112B . . . . . . . . . . . . . . . . . 27DEB1-H121B . . . . . . . . . . . . . . . . . 27DEB1-H122B . . . . . . . . . . . . . . . . . 27DEB1-H211B . . . . . . . . . . . . . . . . . 28DEB1-H212B . . . . . . . . . . . . . . . . . 28DEB1-H221B . . . . . . . . . . . . . . . . . 28DEB1-H222B . . . . . . . . . . . . . . . . . 28DEB1-M102B . . . . . . . . . . . . . . . . 25DEB1-M111B . . . . . . . . . . . . . . . . 25DEB1-M112B . . . . . . . . . . . . . . . . 25DEB1-M121B . . . . . . . . . . . . . . . . 25DEB1-M122B . . . . . . . . . . . . . . . . 25DEB1-M202B . . . . . . . . . . . . . . . . 26DEB1-M211B . . . . . . . . . . . . . . . . 26DEB1-M212B . . . . . . . . . . . . . . . . 26DEB1-M221B . . . . . . . . . . . . . . . . 26DEB1-M222B . . . . . . . . . . . . . . . . 26DEC1-H111C . . . . . . . . . . . . . . . . . 27DEC1-H112C . . . . . . . . . . . . . . . . . 27DEC1-H121C . . . . . . . . . . . . . . . . . 27DEC1-H122C . . . . . . . . . . . . . . . . . 27DEC1-H131C . . . . . . . . . . . . . . . . . 27DEC1-H132C . . . . . . . . . . . . . . . . . 27DEC1-H211C . . . . . . . . . . . . . . . . . 28DEC1-H212C . . . . . . . . . . . . . . . . . 28DEC1-H221C . . . . . . . . . . . . . . . . . 28DEC1-H222C . . . . . . . . . . . . . . . . . 28DEC1-H231C . . . . . . . . . . . . . . . . . 28DEC1-H232C . . . . . . . . . . . . . . . . . 28DEC1-M101C . . . . . . . . . . . . . . . . 25DEC1-M102C . . . . . . . . . . . . . . . . 25DEC1-M111C . . . . . . . . . . . . . . . . 25DEC1-M112C . . . . . . . . . . . . . . . . 25DEC1-M121C . . . . . . . . . . . . . . . . 25DEC1-M122C . . . . . . . . . . . . . . . . 25DEC1-M131C . . . . . . . . . . . . . . . . 25DEC1-M132C . . . . . . . . . . . . . . . . 25DEC1-M201C . . . . . . . . . . . . . . . . 26DEC1-M202C . . . . . . . . . . . . . . . . 26DEC1-M211C . . . . . . . . . . . . . . . . 26DEC1-M212C . . . . . . . . . . . . . . . . 26DEC1-M221C . . . . . . . . . . . . . . . . 26DEC1-M222C . . . . . . . . . . . . . . . . 26DEC1-M231C . . . . . . . . . . . . . . . . 26DEC1-M232C . . . . . . . . . . . . . . . . 26DES1-H111S . . . . . . . . . . . . . . . . . 27

INDEX

148 | USA

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Model Number PageDES1-H112S . . . . . . . . . . . . . . . . . 27DES1-H121S . . . . . . . . . . . . . . . . . 27DES1-H122S . . . . . . . . . . . . . . . . . 27DES1-H131S . . . . . . . . . . . . . . . . . 27DES1-H132S . . . . . . . . . . . . . . . . . 27DES1-H211S . . . . . . . . . . . . . . . . . 28DES1-H212S . . . . . . . . . . . . . . . . . 28DES1-H221S . . . . . . . . . . . . . . . . . 28DES1-H222S . . . . . . . . . . . . . . . . . 28DES1-H231S . . . . . . . . . . . . . . . . . 28DES1-H232S . . . . . . . . . . . . . . . . . 28DES1-M101B . . . . . . . . . . . . . . . . 25DES1-M101S . . . . . . . . . . . . . . . . 25DES1-M102S . . . . . . . . . . . . . . . . 25DES1-M111S . . . . . . . . . . . . . . . . 25DES1-M112S . . . . . . . . . . . . . . . . 25DES1-M121S . . . . . . . . . . . . . . . . 25DES1-M122S . . . . . . . . . . . . . . . . 25DES1-M131S . . . . . . . . . . . . . . . . 25DES1-M132S . . . . . . . . . . . . . . . . 25DES1-M201B . . . . . . . . . . . . . . . . 26DES1-M201S . . . . . . . . . . . . . . . . 26DES1-M202S . . . . . . . . . . . . . . . . 26DES1-M211S . . . . . . . . . . . . . . . . 26DES1-M212S . . . . . . . . . . . . . . . . 26DES1-M221S . . . . . . . . . . . . . . . . 26DES1-M222S . . . . . . . . . . . . . . . . 26DES1-M231S . . . . . . . . . . . . . . . . 26DES1-M232S . . . . . . . . . . . . . . . . 26DOC1-H2011M . . . . . . . . . . . . . . . 42DOC1-H2021M . . . . . . . . . . . . . . . 42DOC1-H2031M . . . . . . . . . . . . . . . 42DOC1-H2111M . . . . . . . . . . . . . . . 42DOC1-H2121M . . . . . . . . . . . . . . . 42DOC1-H2131M . . . . . . . . . . . . . . . 42DOC1-H2211M . . . . . . . . . . . . . . . 36DOC1-H2221M . . . . . . . . . . . . . . . 36DOC1-H2231M . . . . . . . . . . . . . . . 36DOC1-H2311M . . . . . . . . . . . . . . . 36DOC1-H2321M . . . . . . . . . . . . . . . 36DOC1-H2331M . . . . . . . . . . . . . . . 36DOC1-M2001M . . . . . . . . . . . . . . . 41DOC1-M2011M . . . . . . . . . . . . . . . 41DOC1-M2021M . . . . . . . . . . . . . . . 41DOC1-M2031M . . . . . . . . . . . . . . . 41DOC1-M2201M . . . . . . . . . . . . . . . 35DOC1-M2211M . . . . . . . . . . . . . . . 35DOC1-M2221M . . . . . . . . . . . . . . . 35DOC1-M2231M . . . . . . . . . . . . . . . 35DOC2-10 . . . . . . . . . . . . . . . . . 45, 86DOC2-11 . . . . . . . . . . . . . . . . . 45, 86DOC2-20 . . . . . . . . . . . . . . . . . 45, 86DOC2-21 . . . . . . . . . . . . . . . . . 45, 86DOC2-30 . . . . . . . . . . . . . . . . . 45, 86DOC2-31 . . . . . . . . . . . . . . . . . 45, 86DON1-H1011B . . . . . . . . . . . . . . . 43DON1-H1021B . . . . . . . . . . . . . . . 43DON1-H1111B . . . . . . . . . . . . . . . 43DON1-H1121B . . . . . . . . . . . . . . . 43

Model Number PageDON1-H1211B . . . . . . . . . . . . . . . 38DON1-H1221B . . . . . . . . . . . . . . . 38DON1-H1311B . . . . . . . . . . . . . . . 38DON1-H1321B . . . . . . . . . . . . . . . 38DON1-H2011B . . . . . . . . . . . . . . . 44DON1-H2021B . . . . . . . . . . . . . . . 44DON1-H2111B . . . . . . . . . . . . . . . 44DON1-H2121B . . . . . . . . . . . . . . . 44DON1-H2211B . . . . . . . . . . . . . . . 38DON1-H2221B . . . . . . . . . . . . . . . 38DON1-H2311B . . . . . . . . . . . . . . . 38DON1-H2321B . . . . . . . . . . . . . . . 38DON1-M1001B . . . . . . . . . . . . . . . 43DON1-M1011B . . . . . . . . . . . . . . . 43DON1-M1021B . . . . . . . . . . . . . . . 43DON1-M1201B . . . . . . . . . . . . . . . 37DON1-M1211B . . . . . . . . . . . . . . . 37DON1-M1221B . . . . . . . . . . . . . . . 37DON1-M2001B . . . . . . . . . . . . . . . 43DON1-M2011B . . . . . . . . . . . . . . . 43DON1-M2021B . . . . . . . . . . . . . . . 43DON1-M2201B . . . . . . . . . . . . . . . 37DON1-M2211B . . . . . . . . . . . . . . . 37DON1-M2221B . . . . . . . . . . . . . . . 37DON2-10 . . . . . . . . . . . . . . . . . 46, 87DON2-11 . . . . . . . . . . . . . . . . . 46, 87DON2-20 . . . . . . . . . . . . . . . . . 46, 87DON2-21 . . . . . . . . . . . . . . . . . 46, 87DON2-30 . . . . . . . . . . . . . . . . . 46, 87DON2-31 . . . . . . . . . . . . . . . . . 46, 87DOS1-H2011M . . . . . . . . . . . . . . . 42DOS1-H2021M . . . . . . . . . . . . . . . 42DOS1-H2031M . . . . . . . . . . . . . . . 42DOS1-H2111M . . . . . . . . . . . . . . . 42DOS1-H2121M . . . . . . . . . . . . . . . 42DOS1-H2131M . . . . . . . . . . . . . . . 42DOS1-H2211M . . . . . . . . . . . . . . . 36DOS1-H2221M . . . . . . . . . . . . . . . 36DOS1-H2231M . . . . . . . . . . . . . . . 36DOS1-H2311M . . . . . . . . . . . . . . . 36DOS1-H2321M . . . . . . . . . . . . . . . 36DOS1-H2331M . . . . . . . . . . . . . . . 36DOS1-M2001M . . . . . . . . . . . . . . . 41DOS1-M2011M . . . . . . . . . . . . . . . 41DOS1-M2021M . . . . . . . . . . . . . . . 41DOS1-M2031M . . . . . . . . . . . . . . . 41DOS1-M2201M . . . . . . . . . . . . . . . 35DOS1-M2211M . . . . . . . . . . . . . . . 35DOS1-M2221M . . . . . . . . . . . . . . . 35DOS1-M2231M . . . . . . . . . . . . . . . 35DOS2-10 . . . . . . . . . . . . . . . . . 45, 86DOS2-11 . . . . . . . . . . . . . . . . . 45, 86DOS2-20 . . . . . . . . . . . . . . . . . 45, 86DOS2-21 . . . . . . . . . . . . . . . . . 45, 86DOS2-30 . . . . . . . . . . . . . . . . . 45, 86DOS2-31 . . . . . . . . . . . . . . . . . 45, 86

DTB1-H102B . . . . . . . . . . . . . . . . . 31DTB1-H111B . . . . . . . . . . . . . . . . . 31DTB1-H112B . . . . . . . . . . . . . . . . . 31

Model Number PageDTB1-H121B . . . . . . . . . . . . . . . . . 31DTB1-H122B . . . . . . . . . . . . . . . . . 31DTB1-H202B . . . . . . . . . . . . . . . . . 32DTB1-H211B . . . . . . . . . . . . . . . . . 32DTB1-H212B . . . . . . . . . . . . . . . . . 32DTB1-H221B . . . . . . . . . . . . . . . . . 32DTB1-H222B . . . . . . . . . . . . . . . . . 32DTB1-M102B . . . . . . . . . . . . . . . . . 29DTB1-M111B . . . . . . . . . . . . . . . . . 29DTB1-M112B . . . . . . . . . . . . . . . . . 29DTB1-M121B . . . . . . . . . . . . . . . . . 29DTB1-M122B . . . . . . . . . . . . . . . . . 29DTB1-M202B . . . . . . . . . . . . . . . . . 30DTB1-M211B . . . . . . . . . . . . . . . . . 30DTB1-M212B . . . . . . . . . . . . . . . . . 30DTB1-M221B . . . . . . . . . . . . . . . . . 30DTB1-M222B . . . . . . . . . . . . . . . . . 30DTC1-H101C . . . . . . . . . . . . . . . . . 31DTC1-H102C . . . . . . . . . . . . . . . . . 31DTC1-H111C . . . . . . . . . . . . . . . . . 31DTC1-H112C . . . . . . . . . . . . . . . . . 31DTC1-H121C . . . . . . . . . . . . . . . . . 31DTC1-H122C . . . . . . . . . . . . . . . . . 31DTC1-H201C . . . . . . . . . . . . . . . . . 32DTC1-H202C . . . . . . . . . . . . . . . . . 32DTC1-H211C . . . . . . . . . . . . . . . . . 32DTC1-H212C . . . . . . . . . . . . . . . . . 32DTC1-H221C . . . . . . . . . . . . . . . . . 32DTC1-H222C . . . . . . . . . . . . . . . . . 32DTC1-M101C . . . . . . . . . . . . . . . . . 29DTC1-M102C . . . . . . . . . . . . . . . . . 29DTC1-M111C . . . . . . . . . . . . . . . . . 29DTC1-M112C . . . . . . . . . . . . . . . . . 29DTC1-M121C . . . . . . . . . . . . . . . . . 29DTC1-M122C . . . . . . . . . . . . . . . . . 29DTC1-M201C . . . . . . . . . . . . . . . . . 30DTC1-M202C . . . . . . . . . . . . . . . . . 30DTC1-M211C . . . . . . . . . . . . . . . . . 30DTC1-M212C . . . . . . . . . . . . . . . . . 30DTC1-M221C . . . . . . . . . . . . . . . . . 30DTC1-M222C . . . . . . . . . . . . . . . . . 30DTS1-H101B . . . . . . . . . . . . . . . . . 31DTS1-H101S . . . . . . . . . . . . . . . . . 31DTS1-H102S . . . . . . . . . . . . . . . . . 31DTS1-H111S . . . . . . . . . . . . . . . . . 31DTS1-H112S . . . . . . . . . . . . . . . . . 31DTS1-H121S . . . . . . . . . . . . . . . . . 31DTS1-H122S . . . . . . . . . . . . . . . . . 31DTS1-H201B . . . . . . . . . . . . . . . . . 32DTS1-H201S . . . . . . . . . . . . . . . . . 32DTS1-H202S . . . . . . . . . . . . . . . . . 32DTS1-H211S . . . . . . . . . . . . . . . . . 32DTS1-H212S . . . . . . . . . . . . . . . . . 32DTS1-H221S . . . . . . . . . . . . . . . . . 32DTS1-H222S . . . . . . . . . . . . . . . . . 32DTS1-M101B . . . . . . . . . . . . . . . . . 29DTS1-M101S . . . . . . . . . . . . . . . . . 29DTS1-M102S . . . . . . . . . . . . . . . . . 29DTS1-M111S . . . . . . . . . . . . . . . . . 29

Model Number PageDTS1-M112S . . . . . . . . . . . . . . . . . 29DTS1-M121S . . . . . . . . . . . . . . . . . 29DTS1-M122S . . . . . . . . . . . . . . . . . 29DTS1-M201B . . . . . . . . . . . . . . . . . 30DTS1-M201S . . . . . . . . . . . . . . . . . 30DTS1-M202S . . . . . . . . . . . . . . . . . 30DTS1-M211S . . . . . . . . . . . . . . . . . 30DTS1-M212S . . . . . . . . . . . . . . . . . 30DTS1-M221S . . . . . . . . . . . . . . . . . 30GRI2 . . . . . . . . . . . . . . . . . . . . . . . 127LOU20 . . . . . . . . . . . . . . . . . . . . . . 110LOU21 . . . . . . . . . . . . . . . . . . . . . . 110MOD1-H11 . . . . . . . . . . . . . . . . . . . 56MOD1-H12 . . . . . . . . . . . . . . . . . . . 56MOD1-H21 . . . . . . . . . . . . . . . . . . . 56MOD1-H22 . . . . . . . . . . . . . . . . . . . 56MOD1-H31 . . . . . . . . . . . . . . . . . . . 56MOD1-H32 . . . . . . . . . . . . . . . . . . . 56MOD1-H41 . . . . . . . . . . . . . . . . . . . 56MOD1-H42 . . . . . . . . . . . . . . . . . . . 56MOD1-M11 . . . . . . . . . . . . . . . . . . 40MOD1-M12 . . . . . . . . . . . . . . . . . . 40MOD1-M21 . . . . . . . . . . . . . . . . . . 40MOD1-M22 . . . . . . . . . . . . . . . . . . 40MOD1-M31 . . . . . . . . . . . . . . . . . . 40MOD1-M32 . . . . . . . . . . . . . . . . . . 40MOD1-M41 . . . . . . . . . . . . . . . . . . 40MOD1-M42 . . . . . . . . . . . . . . . . . . 40MON 2A . . . . . . . . . . . . . . . . . . . . 127MTH1 H2 11A . . . . . . . . . . . . . . . . 21MTH1 H2 11B . . . . . . . . . . . . . . . . 21MTH1 H2 12A . . . . . . . . . . . . . . . . 21MTH1 H2 12B . . . . . . . . . . . . . . . . 21MTH1 H2 13A . . . . . . . . . . . . . . . . 21MTH1 H2 13B . . . . . . . . . . . . . . . . 21MTH1 H2 21A . . . . . . . . . . . . . . . . 21MTH1 H2 21B . . . . . . . . . . . . . . . . 21MTH1 H2 22A . . . . . . . . . . . . . . . . 21MTH1 H2 22B . . . . . . . . . . . . . . . . 21MTH1 H2 23A . . . . . . . . . . . . . . . . 21MTH1 H2 23B . . . . . . . . . . . . . . . . 21MTH1 L2 10A . . . . . . . . . . . . . . . . 19MTH1 L2 10B . . . . . . . . . . . . . . . . 19MTH1 L2 11A . . . . . . . . . . . . . . . . 18MTH1 L2 11B . . . . . . . . . . . . . . . . 18MTH1 L2 12A . . . . . . . . . . . . . . . . 18MTH1 L2 12B . . . . . . . . . . . . . . . . 18MTH1 L2 13A . . . . . . . . . . . . . . . . 19MTH1 L2 13B . . . . . . . . . . . . . . . . 19MTH1 L2 20A . . . . . . . . . . . . . . . . 19MTH1 L2 20B . . . . . . . . . . . . . . . . 19MTH1 L2 21A . . . . . . . . . . . . . . . . 18MTH1 L2 21B . . . . . . . . . . . . . . . . 18MTH1 L2 22A . . . . . . . . . . . . . . . . 18MTH1 L2 22B . . . . . . . . . . . . . . . . 18MTH1 L2 23A . . . . . . . . . . . . . . . . 19MTH1 L2 23B . . . . . . . . . . . . . . . . 19MTH1 M2 10A . . . . . . . . . . . . . . . 20MTH1 M2 10B . . . . . . . . . . . . . . . 20

INDEX

USA | 149

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Model Number PageMTH1 M2 11A . . . . . . . . . . . . . . . 19MTH1 M2 11B . . . . . . . . . . . . . . . 19MTH1 M2 12A . . . . . . . . . . . . . . . 20MTH1 M2 12B . . . . . . . . . . . . . . . 20MTH1 M2 13A . . . . . . . . . . . . . . . 20MTH1 M2 13B . . . . . . . . . . . . . . . 20MTH1 M2 20A . . . . . . . . . . . . . . . 20MTH1 M2 20B . . . . . . . . . . . . . . . 20MTH1 M2 21A . . . . . . . . . . . . . . . 19MTH1 M2 21B . . . . . . . . . . . . . . . 19MTH1 M2 22A . . . . . . . . . . . . . . . 20MTH1 M2 22B . . . . . . . . . . . . . . . 20MTH1 M2 23A . . . . . . . . . . . . . . . 20MTH1 M2 23B . . . . . . . . . . . . . . . 20PAN1-H11A . . . . . . . . . . . . . . . . . . 50PAN1-H11B . . . . . . . . . . . . . . . . . . 50PAN1-H12A . . . . . . . . . . . . . . . . . . 50PAN1-H12B . . . . . . . . . . . . . . . . . . 50PAN1-H21A . . . . . . . . . . . . . . . . . . 51PAN1-H21B . . . . . . . . . . . . . . . . . . 51PAN1-H22A . . . . . . . . . . . . . . . . . . 51PAN1-H22B . . . . . . . . . . . . . . . . . . 51PAN1-H31A . . . . . . . . . . . . . . . . . . 51PAN1-H31B . . . . . . . . . . . . . . . . . . 51PAN1-H32A . . . . . . . . . . . . . . . . . . 51PAN1-H32B . . . . . . . . . . . . . . . . . . 51

PAN1-HR-11A . . . . . . . . . . . . . . . . 52PAN1-HR-11B . . . . . . . . . . . . . . . . 52PAN1-HR-12A . . . . . . . . . . . . . . . . 52PAN1-HR-12B . . . . . . . . . . . . . . . . 52PAN1-HR-21A . . . . . . . . . . . . . . . . 52PAN1-HR-21B . . . . . . . . . . . . . . . . 52PAN1-HR-22A . . . . . . . . . . . . . . . . 52PAN1-HR-22B . . . . . . . . . . . . . . . . 52PAN1-HR-31A . . . . . . . . . . . . . . . . 52PAN1-HR-31B . . . . . . . . . . . . . . . . 52PAN1-HR-32A . . . . . . . . . . . . . . . . 52PAN1-HR-32B . . . . . . . . . . . . . . . . 52

Model Number PagePAN1-M11A . . . . . . . . . . . . . . . . . 49PAN1-M11B . . . . . . . . . . . . . . . . . 49PAN1-M12A . . . . . . . . . . . . . . . . . 49PAN1-M12B . . . . . . . . . . . . . . . . . 49PAN1-M21A . . . . . . . . . . . . . . . . . 49PAN1-M21B . . . . . . . . . . . . . . . . . 49PAN1-M22A . . . . . . . . . . . . . . . . . 49PAN1-M22B . . . . . . . . . . . . . . . . . 49PAN1-M31A . . . . . . . . . . . . . . . . . 50PAN1-M31B . . . . . . . . . . . . . . . . . 50PAN1-M32A . . . . . . . . . . . . . . . . . 50PAN1-M32B . . . . . . . . . . . . . . . . . 50RAT4-18-18-22 . . . . . . . . . . . . . . 146RAT4-18D-24 . . . . . . . . . . . . . . . . 146RAT4-24D-24 . . . . . . . . . . . . . . . . 146RAT4-27-27-24 . . . . . . . . . . . . . . 146RAT4-36-36-16 . . . . . . . . . . . . . . 146RAT4-36D-16 . . . . . . . . . . . . . . . . 146RAT4-42-21-16 . . . . . . . . . . . . . . 146RAT4-54-16-33 . . . . . . . . . . . . . . 146RIV3-1 . . . . . . . . . . . . . . . . . . . . . 120RIV3-2 . . . . . . . . . . . . . . . . . . . . . 120RIV3-3 . . . . . . . . . . . . . . . . . . . . . 120SER3-1-0 . . . . . . . . . . . . . . . . . . . 119SER3-1-1 . . . . . . . . . . . . . . . . . . . 119SER3-2X-0 . . . . . . . . . . . . . . . . . . 119SER3-2X-1 . . . . . . . . . . . . . . . . . . 119SER4-18-18-21 . . . . . . . . . . . . . . 135SER4-24-24-16 . . . . . . . . . . . . . . 135SER4-24-24-21 . . . . . . . . . . . . . . 135SER4-30-30-21 . . . . . . . . . . . . . . 135SER4-36-36-16 . . . . . . . . . . . . . . 135SER4-42-24-16 . . . . . . . . . . . . . . 135SLO3-10 . . . . . . . . . . . . . . . . . . . . 125SLO3-11 . . . . . . . . . . . . . . . . . . . . 125SLO3-20 . . . . . . . . . . . . . . . . . . . . 125SLO3-21 . . . . . . . . . . . . . . . . . . . . 125SLO3-30 . . . . . . . . . . . . . . . . . . . . 125

Model Number PageSLO3-31 . . . . . . . . . . . . . . . . . . . . 125SPI1H201 . . . . . . . . . . . . . . . . . . . 74SPI1H202 . . . . . . . . . . . . . . . . . . . 74SPI1H211 . . . . . . . . . . . . . . . . . . . 74SPI1H212 . . . . . . . . . . . . . . . . . . . 74SPI1H221 . . . . . . . . . . . . . . . . . . . 74SPI1H222 . . . . . . . . . . . . . . . . . . . 74SPI1H231 . . . . . . . . . . . . . . . . . . . 74SPI1H232 . . . . . . . . . . . . . . . . . . . 74SPI1M201 . . . . . . . . . . . . . . . . . . . 73SPI1M202 . . . . . . . . . . . . . . . . . . . 73SPI1M203 . . . . . . . . . . . . . . . . . . . 73SPI1M211 . . . . . . . . . . . . . . . . . . . 73SPI1M212 . . . . . . . . . . . . . . . . . . . 73SPI1M213 . . . . . . . . . . . . . . . . . . . 73SPI1M221 . . . . . . . . . . . . . . . . . . . 73SPI1M222 . . . . . . . . . . . . . . . . . . . 73SPI1M223 . . . . . . . . . . . . . . . . . . . 73SPI1M231 . . . . . . . . . . . . . . . . . . . 73SPI1M232 . . . . . . . . . . . . . . . . . . . 73SPI1M233 . . . . . . . . . . . . . . . . . . . 73STA1M20 . . . . . . . . . . . . . . . . . . . . 69STA1M21 . . . . . . . . . . . . . . . . . . . . 69STA1M22 . . . . . . . . . . . . . . . . . . . . 69STA2MC0 . . . . . . . . . . . . . . . 70, 106STA2MC1 . . . . . . . . . . . . . . . 70, 106STA2ML0 . . . . . . . . . . . . . . . 70, 106STA2ML1 . . . . . . . . . . . . . . . 70, 106STU2111 . . . . . . . . . . . . . . . . . . . 123STU2112 . . . . . . . . . . . . . . . . . . . 123STU2221 . . . . . . . . . . . . . . . . . . . 123STU2222 . . . . . . . . . . . . . . . . . . . 123STU2321 . . . . . . . . . . . . . . . . . . . 123STU2322 . . . . . . . . . . . . . . . . . . . 123SUT3-1-0-1 . . . . . . . . . . . . . . . . . 118SUT3-1-0-2 . . . . . . . . . . . . . . . . . 118SUT3-1-1-1 . . . . . . . . . . . . . . . . . 118SUT3-1-1-2 . . . . . . . . . . . . . . . . . 118

Model Number PageSUT3-2-0-1 . . . . . . . . . . . . . . . . . 118SUT3-2-0-2 . . . . . . . . . . . . . . . . . 118SUT3-2-1-1 . . . . . . . . . . . . . . . . . 118SUT3-2-1-2 . . . . . . . . . . . . . . . . . 118SUT3-3-0-1 . . . . . . . . . . . . . . . . . 118SUT3-3-0-2 . . . . . . . . . . . . . . . . . 118SUT3-3-1-1 . . . . . . . . . . . . . . . . . 118SUT3-3-1-2 . . . . . . . . . . . . . . . . . 118SUT4-24-24-16 . . . . . . . . . . . . . . 134SUT4-24-24-21 . . . . . . . . . . . . . . 134SUT4-30-30-11 . . . . . . . . . . . . . . 134SUT4-30-30-16 . . . . . . . . . . . . . . 134SUT4-48-24-16 . . . . . . . . . . . . . . 134SUT4-48-24-21 . . . . . . . . . . . . . . 134SUT4-48-30-11 . . . . . . . . . . . . . . 134SUT4-48-30-16 . . . . . . . . . . . . . . 134THE20 . . . . . . . . . . . . . . . . . . . . . 109VIR4-18-18-21-0 . . . . . . . . . . . . 136VIR4-18-18-21-1 . . . . . . . . . . . . 136VIR4-24-24-16-0 . . . . . . . . . . . . 136VIR4-24-24-16-1 . . . . . . . . . . . . 136VIR4-24-24-21-0 . . . . . . . . . . . . 136VIR4-24-24-21-1 . . . . . . . . . . . . 136VIR4-24D-16-0 . . . . . . . . . . . . . . 136VIR4-24D-16-1 . . . . . . . . . . . . . . 136VIR4-24D-21-0 . . . . . . . . . . . . . . 136VIR4-24D-21-1 . . . . . . . . . . . . . . 136VIR4-30-30-21-0 . . . . . . . . . . . . 136VIR4-30-30-21-1 . . . . . . . . . . . . 136VIR4-36-36-16-0 . . . . . . . . . . . . 136VIR4-36-36-16-1 . . . . . . . . . . . . 136VIR4-36D-16-0 . . . . . . . . . . . . . . 136VIR4-36D-16-1 . . . . . . . . . . . . . . 136VIR4-42-42-16-0 . . . . . . . . . . . . 136VIR4-42-42-16-1 . . . . . . . . . . . . 136VIR4-48-24-16-0 . . . . . . . . . . . . 136VIR4-48-24-16-1 . . . . . . . . . . . . 136

INDEX

150 | USA

EF

FE

CT

IVE

MA

RC

H 1, 2008 A

PR

ICE

INC

RE

AS

E O

F 5%

WILL A

PP

LY T

O A

LL PR

OD

UC

TS

IN T

HIS

PR

ICE

LIST

Krug Seating and Tables

Documents

Transcript of Krug Seating and Tables