Koppl Pipeline Services, Inc.cdn.thomasnet.com/ccp/01300068/37331.pdf · Hot Tapping Need to tie...
Transcript of Koppl Pipeline Services, Inc.cdn.thomasnet.com/ccp/01300068/37331.pdf · Hot Tapping Need to tie...
Koppl Pipeline Services, Inc. Hot Tapping • Line Stopping • Pipe Freezing • Valve Inserting
In today’s competitive business climate, along with one merger after another, you need someone you can trust. A company small enough to give you the personal attention you need, but experienced enough to handle even the
most difficult tasks.
Koppl Pipeline Services, Inc. can meet that challenge. Instilling the core values of quality, value, and service, you
can be assured of a job well done, from beginning to end. We employ the latest technology for hot tapping, line stopping, and pipe freezing for trouble free completion of even the most complicated projects. With a broad
background in on-line services, our technicians are well trained and confident in the work they perform.
Hot Tapping Need to tie into a line? Can’t shut it down? Hot tapping is the answer. A safe and economical way of connecting a new service
to an existing main line, with no loss of product, and no interruption of service. Hot taps can be performed on almost any type
of pipe, including steel, copper, CLMC, Asbestos Cement, Cast Iron, Ductile Iron, PVC, and others.
Line Stopping Need to replace a valve? Or a bad section of pipe? Maybe you need to re-route a section to accommodate site modifications.
Line stopping is the ultimate solution. By inserting a plugging device inside the line, the contents can temporarily be held back,
while you perform the necessary work downstream. By using a by-pass configuration, continuous flow of the contents can be
maintained, so the system can operate normally. Using folding-head technology, line stops can be performed even more
economically than ever before.
Pipe Freezing A cost-effective and non-intrusive method of holding back system pressure in a section of piping. Freeze chambers are installed
over a short section of piping and injected with liquid nitrogen or CO2. After careful monitoring, an ice plug is formed inside the pipe. The adhesion of ice to metal is incredible, and can hold enormous amounts of pressure, making it a preferred choice in
certain applications.
Valve Inserting Koppl Pipeline Services understands that in most cases, it is undesirable to stop the flow in the line or drain it completely in order to install a new valve. When a new valve needs to be installed, a valve insertion by a Koppl Pipeline technician is a quick
and simple solution. Using new technologies and equipment, a valve insertion is also a very cost effective solution for many applications. Only one excavation, quick installation, and immediate results.
When the need arises for pipeline additions or modifications, think Koppl. We are committed to providing the
highest level of service, and we welcome the opportunity to work closely with our customers to determine the best solution for their particular project. We are available 24 hours a day, 7 days a week for emergency and after-hours
work.
If you have a Hot Tapping, Line Stopping, Pipe Freezing, or Valve Inserting project that needs review, or if you
would like more information on our company, please feel free to contact us. We can visit your jobsite or provide you with a quotation right over the phone.
Koppl Pipeline Services, Inc.... Providing Yesterday’s Values With Today’s Technology
Koppl Pipeline Services, Inc. • 1228 Date Street • Montebello, CA 90640 USA
Phone 323-888-2211 • Fax 323-888-2232 • www.koppl.com CCL#844802 AZCL#ROC216719 NVCL#0060642
Products Koppl Pipeline Services provides a variety of custom hot tapping and line stopping fittings for the water, wastewater, plumbiand industrial markets.
Koppl Hot Tap Fittings for Steel Pipe
Used for making hot tap connections into a live line Sizes available for 2” and larger for size
Can be made to fit any diameter, including flat plate installations
Standard ANSI 150# Flanges used, with optional 300# Flanges available
RN – Standard Nozzle RN-100 – Standard Nozzle with Collar Plates
RN-120 – Standard Nozzle with Full Wrap Plates CN – Cement Lined Plain
CN-100 – Cement Lined with Collar Plates CN-120 – Cement Lined with Full Wrap Plates
Full port inside diameter for maximum flow. Pre
KopplStop™ Line Stop Fittings Pin-Style Line Stop Fittings for steel pipe
Size-on-Size and Reducing Branch Dutchman Pin-Style Line Stop Fittings for placement onto a standard flange
QT Style Line Fittings for steel pipe Stainless Steel Bolt-on Fittings for copper, PVC, and ductile iron
Koppl SV-150™ Tapping Fitting
Allows for a hot tapped branch connection without requiring a permanent valve
Use a Butterfly Valve as the permanent valve instead of an expensive gat Can be used on any type of pipe
Fittings can be shop coated with high performance rust inhibitor or epoxy coated Outlets from 4”-24” are available
Shaped Nipples
Schedule 40 or Schedule 80 pipe contoured to fit any diameter pipe Perpendicular or angled cuts
Stainless Steel or Carbon Steel Precision cut with our Plasma Equipped Contouring Machine
Reinforcement Plates and Rolled Material
Custom cut reinforcement plates for hot tap and line stop fittings Wedding Bands for pipe joints (with
Cut to fit piping or tanks 3/16”, 1/4”, and 3/8” plate thicknesses available
Koppl TW-100™ Thermowell Fittings
Used for insertion of temperature sensors and wells into a live piping system
Custom made to fit any length and any Systems available for steel, cast iron, ductile iron, PVC, and copper
Hot Tapping Machine Accessories
Carbide and High Speed Steel Hole Saws Authorized Relton Distributor for HSS and Carbide Hole Saws
Pilot Drills – 1/4” and 3/8” HSS with catch wire Custom parts and repair services available
Hot Tapping Saddles for all Types of Pipe
Tapping Saddles for Asbestos Cement, Ductile Iron, Cast Iron, Carbon Steel, Copper, PVC. Epoxy Coated Bolt-on Saddles (Mechanical Joint or Single O
Stainless Steel Tapping Saddles Custom Bolting Options
Koppl Pipeline Services can supply and install all of the above fittings. For information on our service capability, please g
call or contact us via email at [email protected]
Koppl Pipeline Services provides a variety of custom hot tapping and line stopping fittings for the water, wastewater, plumbi
Used for making hot tap connections into a live line ” and larger for size-on-size and reducing outlets
Can be made to fit any diameter, including flat plate installations
Standard ANSI 150# Flanges used, with optional 300# Flanges available
with Collar Plates
Standard Nozzle with Full Wrap Plates
Cement Lined with Collar Plates Cement Lined with Full Wrap Plates
Full port inside diameter for maximum flow. Pre-contoured for easy field fit-up. Optional Test Ports available.
Style Line Stop Fittings for steel pipe
Style Line Stop Fittings for placement onto a standard flange
on Fittings for copper, PVC, and ductile iron
Allows for a hot tapped branch connection without requiring a permanent valve
Use a Butterfly Valve as the permanent valve instead of an expensive gate valve
Fittings can be shop coated with high performance rust inhibitor or epoxy coated
Schedule 40 or Schedule 80 pipe contoured to fit any diameter pipe
Precision cut with our Plasma Equipped Contouring Machine
Reinforcement Plates and Rolled Material
Custom cut reinforcement plates for hot tap and line stop fittings Wedding Bands for pipe joints (with or without hand holes)
3/16”, 1/4”, and 3/8” plate thicknesses available
Used for insertion of temperature sensors and wells into a live piping system
Custom made to fit any length and any diameter well Systems available for steel, cast iron, ductile iron, PVC, and copper
Carbide and High Speed Steel Hole Saws Authorized Relton Distributor for HSS and Carbide Hole Saws
h catch wire Custom parts and repair services available
Hot Tapping Saddles for all Types of Pipe
Tapping Saddles for Asbestos Cement, Ductile Iron, Cast Iron, Carbon Steel, Copper, PVC. on Saddles (Mechanical Joint or Single O-Ring Type)
Koppl Pipeline Services can supply and install all of the above fittings. For information on our service capability, please g
Koppl Pipeline Services provides a variety of custom hot tapping and line stopping fittings for the water, wastewater, plumbing,
up. Optional Test Ports available.
Koppl Pipeline Services can supply and install all of the above fittings. For information on our service capability, please give us a