KOOL WATER DISPENSER - Dimplex Thermal Solutions · Recipe-Specific Water Dispenser Providing...
2
KOOL WATER DISPENSER Recipe-Specific Water Dispenser Providing Consistent Water Temperature and Volume to Improve Quality and Reduce Waste High Quality Production • Dispenses recipe-specific quantities of water at a consistent pre-set temperature • Designed to handle a wide range of incoming cold and hot water temperatures from 40–140°F, resulting in colder water necessary for baking • Designed for high ambient temperatures Easy Operation and Installation • Press one button to dispense water at recipe-specific volume and temperature • Easy installation with single bracket mounting on a backer board • Plug and play with existing hot and cold water supply • Cleanable, reusable air filter easily accessible on side of unit Lowest Total Cost of Ownership • Eliminate guesswork of temperature and volume and reduces production prep time • Reduces product waste due to incorrect water temperature or volume • Designed and built for high reliability and uptime • 18-month parts and labor warranty • 24/7 technical support and service Versatile and Efficient Food-Grade Chillers Increase productivity, quality, and consistency with our versatile and easy-to-use Kool Water Dispenser. Get exact levels of temperature controlled water for preprogrammed recipes and eliminate manually filling containers and manually monitoring water temperatures. The Kool Water Dispenser saves time, reduces waste, and provides consistent water temperatures to produce quality recipes that will delight customers. Save prep time Consistent temperature Exact water volume
Transcript of KOOL WATER DISPENSER - Dimplex Thermal Solutions · Recipe-Specific Water Dispenser Providing...
KOOL WATER DISPENSER Recipe-Specific Water Dispenser
Providing Consistent Water Temperature and Volume to Improve Quality and Reduce Waste
High Quality Production• Dispenses recipe-specific quantities of
water at a consistent pre-set temperature
• Designed to handle a wide range of incoming cold and hot water temperatures from 40–140°F, resulting in colder water necessary for baking
• Designed for high ambient temperatures
Easy Operation and Installation• Press one button to dispense water at
recipe-specific volume and temperature
• Easy installation with single bracket mounting on a backer board
• Plug and play with existing hot and cold water supply
• Cleanable, reusable air filter easily accessible on side of unit
Lowest Total Cost of Ownership• Eliminate guesswork of temperature and volume and reduces production prep time
• Reduces product waste due to incorrect water temperature or volume
• Designed and built for high reliability and uptime
• 18-month parts and labor warranty
• 24/7 technical support and service
Versatile and Efficient Food-Grade ChillersIncrease productivity, quality, and consistency with our versatile and easy-to-use Kool Water Dispenser. Get exact levels of temperature controlled water for preprogrammed recipes and eliminate manually filling containers and manually monitoring water temperatures.
The Kool Water Dispenser saves time, reduces waste, and provides consistent water temperatures to produce quality recipes that will delight customers.
Save prep time
Consistent temperature
Exact water volume
Glen Dimplex Thermal Solutions 2625 Emerald Drive, Kalamazoo, MI 49001
(800) 968-5665 dimplexthermal.com | [email protected] REV. 09142018
Controller
The controller is pre-programmed for specific recipes at the factory prior to shipping with recipes labeled on the display screen.
The user selects buttons 1, 2, 3, or 5 to dispense recipe-specific quantities of water at a pre-set temperature.
The user can STOP the process with button 4.
1
2
3
4/X
/5
/6
/7
!/8
3/4” GHT hot water 110-140°F
Water dispenses into container
Container(not included)
Cleanable air filter
10 ft 110/1PH/60Hz 15 Amp cord (included)
3/4” GHT cold water 40-95°F
Minimum 1.5 ft clearance for air discharge
18
”5
2”
35
”
Counter
Floor
Ceiling
HeatDuct(not
included)
SpecificationsDimensions: 20"w x 19"d x 32"h
Location: Indoors
Uncrated Weight: 105 lbs
Cooling Capacity: 6,000 BTU/hr (1/2 ton)
City Water Max: 90 PSI
Max Tank Capacity: 9.8 qts
Minimum ambient temperature: 50°F
Maximum ambient temperature: 104°F
Incoming Cold Water Temp: 40–95°F
Incoming Hot Water Temp: 110-140°F
10 ft power cord included
110/1PH/60Hz
FLA – 12 Amps (15 Amps Min. Circuit)
NSF and UL Certified
