Konica-20150518141554neufert-cdn.archdaily.net/uploads/product_file/file/5644/merged__2... ·...
Transcript of Konica-20150518141554neufert-cdn.archdaily.net/uploads/product_file/file/5644/merged__2... ·...
Préc
ontr
aint
is a
Ser
ge F
erra
ri re
gist
ered
trad
e m
ark.
ref.
1787
• D
ECEM
BRE
2015
/ V1.
01Co
ver p
hoto
: Met
ro S
tatio
n, S
antia
go (C
hile
) ©
Ser
ge F
erra
ri
Technical properties Précontraint 1302 S2 StandardsSurface treatment (top/back) S2 PVDF / PVDFYarn PES HT 1100/2200 DtexWeight 1350 g/sqm • 39.8 oz/sqyd EN ISO 2286-2Width 267 cm • 105.1 in (+1mm /-1mm)
Tensile strength (warp/weft) 800/700 daN/5cm 900/800 lbs/in
EN ISO 1421 ASTM D 751-00 Cut Strip
Tear resistance (warp/weft) 120/110 daN 200/180 lbs
DIN 53.363 ASTM D 751-00 Trapezoid
Adhesion 13 daN/5cm EN ISO 2411Flame retardancy Euroclass C-s2,d0/EN 13501-1Rating B1/DIN 4102-1 • BS 7837 • Test2/NFPA 701 • CSMF T19Guarantee*
GB
> The technical data here above are average values with a +/-5% tolerance
Management systemsQuality in conformity with ISO 9001Environmental communication in conformity with ISO 14021Certifications, labels, recycling capacity
LCA and LEED reports available on request
LEED Heat island EffectRoof / Non roof (up to 1 pt/ 2 pts) Solar Reflectance Index >95% SSc 7.2/SSc 7.1 Environmental Impact: LCA (Life Cycle Assessment) ISO 14041-44Comparative analysis dependingon end-of-life scenarios
Texyloop® Recycling Incineration Landfill Functional unit = 1 sqm
Material only / 1302 S2 valuesGlobal warming 3.185 6.115 5.274 Kilograms eq. CO2
Energy consumption 70.95 132.9 132.9 Megajoul eq.Water consumption 161.9 406.2 404 Litre
LongevityTotal thickness 1.02 mmCoating thickness at the top of the yarns 250 micronsVarnish adhesion longevity QUV A 4000 h pass Scotch tape testSolar optical values ASHRAE 74-1988 EN 410Solar Transmittance (Ts) 5% 4.5%Solar reflectance (Rs) 76% 78%Solar Factor (g) 10% 8.5%Visible light Transmittance (Tv) -- 3%Visible light Reflectance (Rv) -- 86%UV transmittance 0%Global thermal conductivity**Vertical / Horizontal position U= 5.6 / 6.4 W/sqm/°CAcoustic performanceWeakening index 15dBA ISO 717-1
> The values here above are given as an indication in order to allow our customers to make the best use of our products. Our products are subjects to evolutions due to technical progress, we remain entitled to modify the characteristics of our products at any time. The buyer of our products is responsible to check that the here above data are still valid.* Warranty: Please refer to the text of our warranty. The warranty is valid only after confirmation on case-by-case basis of warranty application. The warranty will not apply to mobile structures.** Those data are obtained by calculation through simulations of the average conditions of use, those values must be considered as approximation.The buyer of our products is fully responsible for their application or their transformation concerning any possible third party. The buyer of our products is responsible for their implementation and installation according to the standards, use and customs and safety rules of the countries where they are used.
→ Contact • Headquarters: + 33 (0)4 74 97 41 33 • Your local representative:
www.sergeferrari.com
→ • The Serge Ferrari operational recycling chain • Secondary raw materials of high intrinsic value compatible with multiple processes • A quantified response to combat depletion of natural resources www.texyloop.com
www.sergeferrari.com
Préc
ontr
aint
is a
Ser
ge F
erra
ri re
gist
ered
trad
e m
ark.
ref.
1788
• D
ECEM
BRE
2015
/ V1.
01Co
ver p
hoto
: Zay
ed U
nive
rsity
, Abu
Dha
bi (U
AE)
© S
erge
Fer
rari
Technical properties Précontraint 1502 S2 StandardsSurface treatment (top/back) S2 PVDF / PVDFYarn PES HT 1670/2200 DtexWeight 1500 g/sqm • 44.2 oz/sqyd EN ISO 2286-2Width 180 cm • 70.86 in (+1mm /-1mm)
Tensile strength (warp/weft) 1000/800 daN/5cm 1150/900 lbs/in
EN ISO 1421 ASTM D 751-00 Cut Strip
Tear resistance (warp/weft) 160/140 daN 350/250 lbs
DIN 53.363 ASTM D 751-00 Trapezoid
Adhesion 15 daN/5cm EN ISO 2411Flame retardancy Euroclass C-s2,d0/EN 13501-1Rating B1/DIN 4102-1 • BS 7837 • CSMF T19Guarantee*
GB
> The technical data here above are average values with a +/-5% tolerance
Management systemsQuality in conformity with ISO 9001Environmental communication in conformity with ISO 14021Certifications, labels, recycling capacity
LCA and LEED reports available on request
LEED Heat island EffectRoof / Non roof (up to 1 pt/2 pts) Solar Reflectance Index >95% SSc 7.2/SSc 7.1 Environmental Impact: LCA (Life Cycle Assessment) ISO 14041-44Comparative analysis dependingon end-of-life scenarios
Texyloop® Recycling Incineration Landfill Functional unit = 1 sqm
Material only / 1502 S2 valuesGlobal warming 3.389 6.636 5.725 Kilograms eq. CO2
Energy consumption 73.6 144.6 144.6 Megajoul eq.Water consumption 168.8 433.9 431.5 Litre
LongevityTotal thickness 1.14 mmCoating thickness at the top of the yarns 200 micronsVarnish adhesion longevity QUV A 4000 h pass Scotch tape testSolar optical values ASHRAE 74-1988 EN 410Solar Transmittance (Ts) 4% 4%Solar reflectance (Rs) 76% 81%Solar Factor (g) 9% 8%Visible light Transmittance (Tv) -- 2.4%Visible light Reflectance (Rv) -- 89%UV transmittance 0%Global thermal conductivity**Vertical / Horizontal position U= 5.6 / 6.4 W/sqm/°CAcoustic performanceWeakening index 16dBA ISO 717-1
> The values here above are given as an indication in order to allow our customers to make the best use of our products. Our products are subjects to evolutions due to technical progress, we remain entitled to modify the characteristics of our products at any time. The buyer of our products is responsible to check that the here above data are still valid.* Warranty: Please refer to the text of our warranty. The warranty is valid only after confirmation on case-by-case basis of warranty application. The warranty will not apply to mobile structures.** Those data are obtained by calculation through simulations of the average conditions of use, those values must be considered as approximation.The buyer of our products is fully responsible for their application or their transformation concerning any possible third party. The buyer of our products is responsible for their implementation and installation according to the standards, use and customs and safety rules of the countries where they are used.
→ Contact • Headquarters: + 33 (0)4 74 97 41 33 • Your local representative:
www.sergeferrari.com
→ • The Serge Ferrari operational recycling chain • Secondary raw materials of high intrinsic value compatible with multiple processes • A quantified response to combat depletion of natural resources www.texyloop.com
www.sergeferrari.com
Préc
ontr
aint
is a
Ser
ge F
erra
ri re
gist
ered
trad
e m
ark.
1785
/ DE
CEM
BRE
2015
/ V1.
01
Technical properties Précontraint 1002 S2 StandardsSurface treatment (top/back) S2 PVDF / PVDFYarn PES HT 1100 DtexWeight 1050 g/sqm • 31 oz/sqyd EN ISO 2286-2Width 267 cm • 105.1 in (+1mm /-1mm)
Tensile strength (warp/weft) 420/400 daN/5cm 480/450 Lbs/in
EN ISO 1421 ASTM D 751-00 Cut Strip
Tear resistance (warp/weft) 55/50 daN 80/75 Lbs
DIN 53.363 ASTM D 751-00 Trapezoid
Adhesion 12 daN/5cm EN ISO 2411Flame retardancy Euroclass B-s2,d0/EN 13501-1Rating M2/NFP 92-507 • B1/DIN 4102-1 • BS 7837 • Test2/NFPA 701 • CSMF T19Guarantee*
GB
> The technical data here above are average values with a +/-5% tolerance.
Management systemsQuality in conformity with ISO 9001Environmental communication in conformity with ISO 14021Certifications, labels, recycling capacity
LEED Heat island EffectRoof / Non Roof (up to 1 pt/2 pts) Solar Reflectance Index >95% SSc 7.2/SSc 7.1Environmental Impact: LCA (Life Cycle Assessment) ISO 14041-44
Depending on end-of-life scenarios Texyloop® Recycling Incineration Landfill 1 sqm membrane 1002 S2
Global warming 2.572 4.757 4.104 Kilograms eq. CO2Energy consumption 59.7 103.3 103.3 Megajoul eq.Water consumption 139.6 341.3 339.6 Litre
Dimensional stabilityElongation 24h -10daN/5cm (warp/weft) <1% / <1% EN 15977Residual elongation <0.4% / <0.4% EN 15977Solar optical values ASHRAE 74-1988 EN 410Solar Transmittance (Ts) 6% 5.5%Solar reflectance (Rs) 78% 81.5%Solar Factor (g) 12% 9%Visible light Transmittance (Tv) -- 4 %UV transmission 0%Thermal and Acoustic performances Thermal conductivity (vertical/horizontal) ca. U=5.6 / 6.4 W/sqm/°C CalculatedAcoustic Weakening index ca. 14dBA ISO 717-1
LCA and LEED reports available on request
> Additional information here above are non-contractual. The values here above are given as an indication in order to allow our customers to make the best use of our products. Our products are subjects to evolutions due to technical progress, we remain entitled to modify the characteristics of our products at any time. The buyer of our products is responsible to check that the here above data are still valid.* Warranty: Please refer to the text of our warranty. The warranty is valid only after confirmation on case-by-case basis of warranty application. The warranty will not apply to mobile structures.The buyer of our products is fully responsible for their application or their transformation concerning any possible third party. The buyer of our products is responsible for their implementation and installation according to the standards, use and customs and safety rules of the countries where they are used.
www.sergeferrari.com
→ Contact • Headquarters:
+ 33 (0)4 74 97 41 33 • Your local representative:
www.sergeferrari.com
→ • The Serge Ferrari operational recycling chain • Secondary raw materials of high intrinsic value compatible with multiple processes • A quantified response to combat depletion of natural resources www.texyloop.com
ADDITIONAL INFORMATIONTotal thickness 0.78 mmCoating thickness at the top of the yarns 200 microns Varnish adhesion longevity QUV A 4000 h pass Scotch tape test
Préc
ontr
aint
is a
Ser
ge F
erra
ri re
gist
ered
trad
e m
ark.
ref.
1786
• D
ECEM
BRE
2015
/V1.
01Co
ver p
hoto
: Bris
bane
Airp
ort (
Aust
ralia
) ©
Ser
ge F
erra
ri
Technical properties Précontraint 1202 S2 StandardsSurface treatment (top/back) S2 PVDF / PVDFYarn PES HT 1100/1670 DtexWeight 1050 g/sqm • 31 oz/sqyd EN ISO 2286-2Width 267 cm • 105.1 in (+1mm /-1mm)
Tensile strength (warp/weft) 560/560 daN/5cm 630/630 lbs/in
EN ISO 1421 ASTM D 751-00 Cut Strip
Tear resistance (warp/weft) 80/65 daN 130/100 lbs
DIN 53.363 ASTM D 751-00 Trapezoid
Adhesion 12 daN/5cm EN ISO 2411Flame retardancy Euroclass B-s2,d0/EN 13501-1Rating B1/DIN 4102-1 • BS 7837 • Test2/NFPA 701 • CSMF T19Guarantee*
GB
> The technical data here above are average values with a +/-5% tolerance
Management systemsQuality in conformity with ISO 9001Environmental communication in conformity with ISO 14021Certifications, labels, recycling capacity
LCA and LEED reports available on request
LEED Heat island EffectRoof/Non roof (up to 1 pt/2 pts) Solar Reflectance Index >95% SSc 7.2/SSc 7.1 Environmental Impact: LCA (Life Cycle Assessment) ISO 14041-44Comparative analysis dependingon end-of-life scenarios
Texyloop® Recycling Incineration Landfill Functional unit = 1 sqm
Material only / 1202 S2 valuesGlobal warming 2.60 4.846 4.193 Kilograms eq. CO2
Energy consumption 60.2 107.1 107.1 Megajoul eq.Water consumption 140.3 333.1 331.3 Litre
LongevityTotal thickness 0.78 mmCoating thickness at the top of the yarns 200 micronsVarnish adhesion longevity QUV A 4000 h pass Scotch tape testSolar optical values ASHRAE 74-1988 EN 410Solar Transmittance (Ts) 6% 6%Solar reflectance (Rs) 75% 80%Solar Factor (g) 11% 10%Visible light Transmittance (Tv) -- 4.5%Visible light Reflectance (Rv) -- 88%UV transmission 0%Global thermal conductivity**Vertical / Horizontal position U= 5.6 / 6.4 W/sqm/°CAcoustic performanceWeakening index 14dBA ISO 717-1
> The values here above are given as an indication in order to allow our customers to make the best use of our products. Our products are subjects to evolutions due to technical progress, we remain entitled to modify the characteristics of our products at any time. The buyer of our products is responsible to check that the here above data are still valid.* Warranty: Please refer to the text of our warranty. The warranty is valid only after confirmation on case-by-case basis of warranty application. The warranty will not apply to mobile structures.**Those data are obtained by calculation through simulations of the average conditions of use, those values must be considered as approximation.The buyer of our products is fully responsible for their application or their transformation concerning any possible third party. The buyer of our products is responsible for their implementation and installation according to the standards, use and customs and safety rules of the countries where they are used.
→ Contact • Headquarters: + 33 (0)4 74 97 41 33 • Your local representative:
www.sergeferrari.com
→ • The Serge Ferrari operational recycling chain • Secondary raw materials of high intrinsic value compatible with multiple processes • A quantified response to combat depletion of natural resources www.texyloop.com
www.sergeferrari.com
Technical properties Précontraint 502 SATIN Standards
Weight 570 g/m2 • 16.8 oz/sqyd EN ISO 2286-2
Width 180 cm • 70.9"
Length of the rolls
Standard format length 40 lm • 43.74 yds
Physical properties
Tensile strength (warp/weft) 200/200 daN/ 5 cm EN ISO 1421
Tear strength (warp/weft) 20/20 daN DIN 53.363
Adhesion 7/7 daN/ 5 cm EN ISO 2411
Surface treatment
Finish PVDF Varnish both sides
Flame retardancyRating M2/NFP 92-507 • M2/UNE 23727 • Method 1 and 2/NFPA 701 • CSFMT19 •
CLASS A/ ASTME84 • BS 7837 • B1/DIN 4102-1 • CLASSE 2/UNI 9177 •CAN/ULC-S109 • SchwerbrennbarQ1-Tr1/ONORM A3800-1• 1530.2/AS/NZSG1/GOST 302944-94 • B-s2,d0/EN 13501-1
Euroclass B-s2,d0/ EN 13501-1
Management system
for Quality ISO 9001
Certifications, labels, guarantees, recycling capacity
The above technical data represent average values subject to a +/-5% tolerance.The buyer of our products is fully responsible for their application and their transformation with regard to any possible third party. The buyer of our products is responsible for their implementation and installation according to the standards, workmanship and safety regulations in force in destination countries. For information on our contractual warranty, please refer to the relevant terms and conditions.The values quoted above represent results of tests performed in compliance with common design practices and are provided for information only to enable customers to make the best use of our products. Our products are subject to changes based on technical advances and we reserve the right to modify their characteristics at any time. The buyer of our products is responsible for checking the validity of the above data.
www.sergeferrari.com
TOOLS AND SERVICES
• Maintenance manual and Life Cycle Assessment (LCA) available on request
Innovation and Performance• A weldable PVDF treatment improves dirt
resistance• A very smooth finish ensures easy upkeep.• Protection against heat, inclement weather
conditions for your comfort all year long.• A maximum UV protection : Precontraint
502 Satin filters 100% of UVB rays (UPF 50+ for all the colours)
Proven longevity• Exceptional long-term mechanical
resistance avails the most demanding structures.
• High UV resistance of colours due to rigorous pigment selection.
Maximum creativity• A unique satin finish to give a modern and
high end look to your projects.• A palette of 40 colours to give personality to
the most varied designs.• Flexibility and strength provides total
freedom of shape and size.
Satin finish compliments current architectural trends
Aesthetics and comfort that lasts
Durability and reliability guaranteed by Précontraint Serge Ferrari® technology
MAIN FEATURES
• Satin finish• Reinforced dirt resistance
and easy cleanability• Dimensional stability• 10 year warranty * • Longevity
APPLICATIONS
• Facade blinds, awnings• Canopies• Velums and pergolas• Shade sails• Light structures and fixed awnings
Préc
ontr
aint
is a
Ser
ge F
erra
ri re
gist
ered
trad
emar
k.Re
f 102
8 - J
ANVI
ER 2
016
- V1.
01
Cove
r pho
tos:
Hea
dqua
rter
s - U
SIn
terio
r pho
tos:
priv
ate
hous
e - N
ew Z
eala
nd •
Dol
phin
Mal
l, M
iam
i - U
S •
Priv
ate
hous
e - C
osta
Ric
a Ph
otos
: Ser
ge F
erra
ri sa
s
GB
→ Contact • Headquarters:
+ 33 (0)4 74 97 41 33 • Your local representative:
www.sergeferrari.com
→ • The Serge Ferrari operational recycling chain • Secondary raw materials of high intrinsic value compatible with multiple processes • A quantified response to combat depletion of natural resources www.texyloop.com
Exclusive Précontraint Serge Ferrari® technology
To know more
High tenacity polyester base cloth
Surface treatment
Patented worldwide, Précontraint Serge Ferrari® technology involves keeping the composite under tension throughout the manufacturing cycle.
Benefits*
• No deformation; won't sag
• Tear resistant
• Long-term aesthetics and strength
• Smooth finish, easy maintenance
Strength characteristics• Exceptional dimensional stability
• Long-term strength
• Greater coating thickness at the top of the yarns
• Exceptional flatness
* Benefits observed for normal product usage
* For static applications
Scan the QR code hereunder to view our video presenting the new Precontraint 502 Satin range ! Visit our website for further information:www.sergeferrari.com
Solar and light properties (EN 14501)Reference TS RS AS
502V2-1125C 6 17 77
502V2-2012C 1 38 61
502V2-2135C 5 61 34
502V2-2137C 0 18 82
502V2-2138C 2 34 64
502V2-2141C 6 49 45
502V2-2148C 1 25 74
502V2-2150C 12 45 43
502V2-2152C 7 38 55
502V2-2156C 1 15 84
502V2-2157C 10 53 37
502V2-2158C 2 36 62
502V2-2160C 5 35 60
502V2-2161C 6 28 66
502V2-2166C 15 58 27
502V2-2167C 1 27 72
502V2-2168C 1 46 53
502V2-2171C 2 51 47
502V2-2172C 14 49 37
502V2-8056C 1 18 81
502V2-8102C 11 80 9
502V2-8204C 16 47 37
502V2-8255C 18 37 45
502V2-8284C 1 18 81
502V2-8341C 11 72 17
502V2-8450C 0 16 84
502V2-8861C 4 65 31
502V2-20185C 2 28 70
502V2-50265C 1 47 52
502V2-50270C 0 16 84
502V2-50668C 1 21 78
502V2-50669C 0 11 89
502V2-50670C 1 22 77
502V2-50671C 4 42 54
502V2-50672C 2 25 73
502V2-50673C 1 18 81
502V2-50674C 10 59 31
502V2-50675C 8 59 33
502V2-50676C 8 47 45
502V2-50677C 7 34 59
TS : Solar Transmission (%) RS : Solar Reflection (%) AS : Solar Absorption (%)TS + RS + AS = 100% of incident energy
White 502V2-8102C
Velvet red 502V2-2152C
METALLIC COLOURS
Boulder 502V2-2171C
Automn 502V2-2138C
Concrete 502V2-2167C
Aluminium 502V2-2168C
Black 502V2-8450C
Concrete 502V2-2167C
Champagne 502V2-8341C Vanilla 502V2-8861C Hemp 502V2-50265C Aniseed 502V2-2157C Olive 502V2-50668C Moss green 502V2-2158C
Cocoa 502V2-2148C Walnut stain 502V2-2137CTeak 502V2-50669C Celadon 502V2-50675C Lagoon 502V2-2160CSteel blue 502V2-50676C
Lemon 502V2-50674C Buttercup 502V2-2166C Dijon 502V2-50671C Dark blue 502V2-50673C Thistle blue 502V2-50270C Celestial blue 502V2-50672C
Orange 502V2-8204C Carrot 502V2-2172C Raspberry 502V2-2150C Victoria Blue 502V2-50677C Midnight blue 502V2-2161C Marine 502V2-1125C
Poppy 502V2-8255C Burgundy 502V2-8284CTerracotta 502V2-20185C
Sandy beige 502V2-2135C Pepper 502V2-2012C Camel 502V2-2141C Porcelain green 502V2-50670C Tennis green 502V2-8056C Spruce 502V2-2156C
Techni cal pr oper t ies
App l icat ion
Surface treatment
Making up
Yarn Weight
Total thickness
Width
Tensile strength Iwarp/weft)
Tear resis tance Iwarp/weft)
Adhesion
Pnkontra int 702 S2
Mobile or permanent structures
PVo F
Weldab le
PES HT 1100 otex
750 g/sqm • 22.1 oz/sqyd
0.60 mm
250-267 cm • 98.4-105. 1 in
280/280 daN/5cm 320/320 lbs/in
30/28 da N 85/80 lbs
10 daN/5cm
Pnkontra int 702 Fluotop T2 Standards
Trop ical climate , static and permanent structures
HIGH CONCENTRATION PVoF / PVoF
Weldable after top surface abrasion
PES HT 1100 o tex
750 g/sqm • 22.1 oz/sqyd
0.56 mm
178 cm • 70.08 in
300/280 da N/5cm 340/320 lbs/in
30/28 da N 85/80 lbs
10 daN/5cm
EN ISO 2286-2
I+ lmm/-lmm]
EN ISO 1421 ASTM 0 751-00 Cut Strip
DIN 53.363 ASTM 0 751-00 Trapezoid
EN ISO 2411
Flame reta rdancy
Euroclass B-s2,dO/ EN 1350- 1 B-s2 ,dO/ EN 1350- 1
Rat ing
Guarantee'
M2/ N FP 92-507 • B1 / oIN 4102-1 • BS 7837 • Test2/ N FPA 701 • CSMF T1 9
> The technical data here above are average vaLues with a +/-5% tolerance
Longevity
Coa ting thickness at t he top of th e ya r ns
Varn ish adhes ion longevity
Wh ite color evo lu tion
Micro organism resistance "
Solar optical values Solar Transmi tta nce ITs] ______ _
So lar reflectance IRs]
Sola r Factor Ig i
-'y~si b~t Transmitta nce ITvl
Visi~ht Re flecta nce IRvl
UV transmiss ion
Vis ible light Tra nsmittance lTv] Global thermal conductivity'"
Ve r t ica l / Hori zon ta l pos it ion
Acoustic performance
Weaken ing index
LEEo Heat island Effect
240 m icro ns
QU V A4000 h pass
QUV A 4000 h liE = 5.5
ASH RAE 74-1 988 EN 41 0
8% 8.5%
74% 78%
13% 12%
6.5%
86%
0%
13.5%
U= 5.6 / 6.4 W/sqm/oC
12dBA
Non roo f l up to 2 pts l Sola r Reflectance Index >95%
Roo f lup to 1 pt ] Solar Reflec tance Index >95%
Envi ronmental Impact: LCA (Life Cycle Assessment]
240 m icrons
QUV A 4000 h pass
aUVA4000 h .toE = 3.5 Meth od A: degree 0, exce llent
ASH RAE 74- 1988 EN4 10
9% 10%
73% 79%
15% 13%
8%
88%
0%
14%
U= 5.6/6 .4 W/sqmjOC
12d BA
Scotch ta pe test
CIE Lab
EN ISO 846
N FP 3851 1 Idiffus-diffusl
ISO 717 -1
Solar Re flecta nce Index >9,-5::-o:-Vo ____ --,S:-cS.c 7.1
Sola r Reflecta nce Index >95% SSc 7.2/G IB C91 No i
ISO 14041-44
Com parative analysis depending Texyloop® Incinerat ion Landf il l Functional uni t = 1 sqm _on_ ':."~_-_o f_- life scenarios __________ R_e_c-'-y_c_ling _______ _ _______________ Material on ly /70252 va lues
Resources de letion 0.0 16 0. 108 0. 108 Kilograms eg o Sb
Glo bal warm ing 1.597 3.136 2.674 Kilograms eq . CO,
Energy cons"-um-'-'-p-'-t i-'-0:.;.n ____________ 4 __ 1_. 7.-'6 _________ 72.44 72.42 ~ajou l eg o
Water co nsumpt ion 88.03 232.9 23 1.6 Lit re
Management systems
Quality in conformi ty w it h
Environmenta l com mun ica t ion in confo rm ity w ith
Certifications, l abels, recycl ing capacity
LeA and LE ED repo r ts 152 and T2] availab le on re quest
ISO 9001
ISO 14021
> The values here above are given as an indication in order to allow our customers to make the best use of our products. Our products are subjects to evolutions due to technical progress, we remain entitled to modify t he characteristics afour products at anytime. The buyer of our products is responsible to check that the here above data are still valid.
* Warranty: Please referto the text of our warranty. The warranty is valid only after confirmation on case-by-case basis of warranty application . The warranty will not apply to mobile structures. ** See long term case studies in tropical climate [Longevity & sustainability brochurel. *** Those data are obtained by calculation through simulations of the average conditions of use, those values must be considered as approximation .
The buyer of our products is fully responsible fortheir application or their transformation concerning any possible third party. The buyerof our products is responsible fortheir implementation and installation according to the standards, use and customs and safety rules of the countries where they are used .
www.sergeferrari.com
• The Serge Ferrari operational recycling chain
• Secondary raw materials of high intrinsic value compatible with multiple processes
• A quantified response to combat depletion of natural resources
S ~ erge Ferrari
(
Préc
ontr
aint
is a
Ser
ge F
erra
ri re
gist
ered
trad
e m
ark.
ref.
1774
• S
EPT
2012
/ V1.
01 •
Stu
dio
Serg
e Fe
rrar
iCo
ver p
hoto
: Sta
dium
- N
elso
n Oy
arzu
n Ar
enas
- Ch
ile
© S
erge
Fer
rari
Technical properties Précontraint 902 S2 StandardsApplication Mobile or permanent structuresSurface treatment (top/back) PVDF / PVDFMaking up WeldableYarn PES HT 1100 DtexWeight 950 g/sqm • 28 oz/sqyd EN ISO 2286-2Total thickness 0.72 mmWidth 267 cm • 105.1 in (+1mm /-1mm)
Tensile strength (warp/weft) 420/400 daN/5cm480/450 lbs/in
EN ISO 1421ASTM D 751-00 Cut Strip
Tear resistance (warp/weft) 55/50 daN105/100 lbs
DIN 53.363ASTM D 751-00 Trapezoid
Adhesion 12 daN/5cm EN ISO 2411Flame retardancy Euroclass B-s2,d0/EN 1350-1Rating M2/NFP 92-507 • B1/DIN 4102-1 • Test 2/NFPA 701 • CSMF T19Guarantee*
GB
> The technical data here above are average values with a +/-5% tolerance
Management systemsQuality in conformity with ISO 9001Environmental communication in conformity with ISO 14021Certifications, labels, recycling capacity
LCA and LEED reports available on request
LEED Heat island EffectNon roof (up to 2 pts) Solar Reflectance Index >95% SSc 7.1 Roof (up to 1 pt) Solar Reflectance Index >95% SSc 7.2/GIB C9 (ND)Environmental Impact: LCA (Life Cycle Assessment) ISO 14041-44Comparative analysis dependingon end-of-life scenarios
Texyloop® Recycling Incineration Landfill Functional unit = 1 sqm
Material only / 902 S2 valuesResources depletion 0.032 0.133 0.133 Kilograms eq. SbGlobal warming 2.33 4.23 3.65 Kilograms eq. CO2
Energy consumption 59.1 95.5 95.5 Megajoul eq.Water consumption 149.3 310.1 308.6 Litre
LongevityCoating thickness at the top of the yarns 300 micronsVarnish adhesion longevity QUV A 4000 h pass Scotch tape testSolar optical values ASHRAE EN 410Solar Transmittance (Ts) 7% 7%Solar reflectance (Rs) 75% 80% ASHRAE 74-1988Solar Factor (g) 11.5% 12.5% EN 410Visible light Transmittance (Tv) -- 5%Visible light Reflectance (Rv) -- 88%UV transmission T-UV 0%Visible light Transmittance (Tv) 9% NFP 38511 (diffus-diffus)Global thermal conductivity**Vertical / Horizontal position U= 5.6 / 6.4 W/sqm/°CAcoustic performanceWeakening index 13dBA ISO 717-1
> The values here above are given as an indication in order to allow our customers to make the best use of our products. Our products are subjects to evolutions due to technical progress, we remain entitled to modify the characteristics of our products at any time. The buyer of our products is responsible to check that the here above data are still valid.* Warranty: Please refer to the text of our warranty. The warranty is valid only after confirmation on case-by-case basis of warranty application. The warranty will not apply to mobile structures.** Those data are obtained by calculation through simulations of the average conditions of use, those values must be considered as approximation.The buyer of our products is fully responsible for their application or their transformation concerning any possible third party. The buyer of our products is responsible for their implementation and installation according to the standards, use and customs and safety rules of the countries where they are used.
→ Contact • Headquarters: + 33 (0)4 74 97 41 33 • Your local representative:
www.sergeferrari.com
→ • The Serge Ferrari operational recycling chain • Secondary raw materials of high intrinsic value compatible with multiple processes • A quantified response to combat depletion of natural resources
www.texyloop.com
www.sergeferrari.com
facebook.com/SergeFerrariGroupJoin us
Préc
ontr
aint
is a
Ser
ge F
erra
ri re
gist
ered
trad
e m
ark.
ref.
1777
• S
EPT
2012
/ V1.
01 •
Stu
dio
Serg
e Fe
rrar
iCo
ver p
hoto
: Zay
ed U
nive
rsity
, Abu
Dha
bi (U
AE)
© S
erge
Fer
rari
Technical properties Précontraint 1502 S2 Précontraint 1502 Fluotop T2 StandardsApplication Mobile or permanent structures Tropical climate, static and permanent structuresSurface treatment (top/back) PVDF / PVDF HIGH CONCENTRATION PVDF / PVDFMaking up Weldable Weldable after top surface abrasionYarn PES HT 1670/2200 Dtex PES HT 1670/2200 DtexWeight 1500 g/sqm • 44.2 oz/sqyd 1500 g/sqm • 44.2 oz/sqyd EN ISO 2286-2Total thickness 1.14 mm 1.14 mmWidth 180 cm • 70.86 in 178 cm • 70.08 in (+1mm /-1mm)
Tensile strength (warp/weft) 1000/800 daN/5cm1150/900 lbs/in
1000/800 daN/5cm1150/900 lbs/in
EN ISO 1421ASTM D 751-00 Cut Strip
Tear resistance (warp/weft) 160/140 daN240/200 lbs
160/140 daN240/200 lbs
DIN 53.363ASTM D 751-00 Trapezoid
Adhesion 15 daN/5cm 15 daN/5cm EN ISO 2411Flame retardancy Euroclass C-s2,d0/EN 1350-1 C-s2,d0/EN 1350-1Rating B1/DIN 4102-1 • BS 7837 • CSMF T19Guarantee*
GB
> The technical data here above are average values with a +/-5% tolerance
Management systemsQuality in conformity with ISO 9001Environmental communication in conformity with ISO 14021Certifications, labels, recycling capacity
LCA and LEED reports (S2 and T2) available on request
LEED Heat island EffectNon roof (up to 2 pts) Solar Reflectance Index >95% Solar Reflectance Index >95% SSc 7.1 Roof (up to 1 pt) Solar Reflectance Index >95% Solar Reflectance Index >95% SSc 7.2/GIB C9 (ND)Environmental Impact: LCA (Life Cycle Assessment) ISO 14041-44Comparative analysis dependingon end-of-life scenarios
Texyloop® Recycling Incineration Landfill Functional unit = 1 sqm
Material only / 1502 S2 valuesResources depletion 0.029 0.184 0.184 Kilograms eq. SbGlobal warming 3.389 6.636 5.725 Kilograms eq. CO2
Energy consumption 73.6 144.6 144.6 Megajoul eq.Water consumption 168.8 433.9 431.5 Litre
LongevityCoating thickness at the top of the yarns 300 microns 300 micronsVarnish adhesion longevity QUV A 4000 h pass QUV A 4000 h pass Scotch tape testWhite color evolution QUV A 4000 h ΔE = 5.5 QUV A 4000 h ΔE = 3.5 CIE LabMicro organism resistance ** -- Method A: degree 0, excellent EN ISO 846-ASolar optical values ASHRAE EN 410 ASHRAE EN 410Solar Transmittance (Ts) 4% 4% 5% 4%Solar reflectance (Rs) 76% 81% 76% 76% ASHRAE 74-1988Solar Factor (g) 9% 8% 10% 8% EN 410Visible light Transmittance (Tv) -- 2.4% -- 3%Visible light Reflectance (Rv) -- 89% -- 83%UV transmission T-UV 0% T-UV 0%Visible light Transmittance (Tv) 5.5% 6% NFP 38511 (diffus-diffus)Global thermal conductivity***Vertical / Horizontal position U= 5.6 / 6.4 W/sqm/°C U= 5.6 / 6.4 W/sqm/°CAcoustic performanceWeakening index 16dBA 16dBA ISO 717-1
> The values here above are given as an indication in order to allow our customers to make the best use of our products. Our products are subjects to evolutions due to technical progress, we remain entitled to modify the characteristics of our products at any time. The buyer of our products is responsible to check that the here above data are still valid.* Warranty: Please refer to the text of our warranty. The warranty is valid only after confirmation on case-by-case basis of warranty application. The warranty will not apply to mobile structures.** See long term case studies in tropical climate (Longevity & sustainability brochure).*** Those data are obtained by calculation through simulations of the average conditions of use, those values must be considered as approximation.The buyer of our products is fully responsible for their application or their transformation concerning any possible third party. The buyer of our products is responsible for their implementation and installation according to the standards, use and customs and safety rules of the countries where they are used.
→ Contact • Headquarters: + 33 (0)4 74 97 41 33 • Your local representative:
www.sergeferrari.com
→ • The Serge Ferrari operational recycling chain • Secondary raw materials of high intrinsic value compatible with multiple processes • A quantified response to combat depletion of natural resources
www.texyloop.com
www.sergeferrari.com
facebook.com/SergeFerrariGroupJoin us
Select an eco-responsible materialPrécontraint TX30 is part of the Serge Ferrari eco-design policy including end of life management:• Texyloop® unique and operational recycling
solution,• Life Cycle Assessment,• Health and Environmental performance:
Eco IDentity.
Choose 30 year design life and above The new generation of Précontraint TX30 composite materials has been developed to match the requirements of the most demanding projects. This technology combines: • a CROSSLINK PVDF surface treatment highly
resistant to photo-oxidation,• a 30YEAR PVC coating formula engineered to resist
erosion for more than 30 years,• an outstanding dimensional stability thanks to
the Précontraint technology.
Durability of mechanical and aesthetical performances
Optimize natural light input and solar protectionPrécontraint TX30 is engineered to optimize the comfort of the building users:• brings in more natural light than the standard
PVC composites (Tv 5%),• protects better against solar heat than the PTFE
composites (G = 20%).
Optimum operating and energy cost
Dismantling before recycling via Texyloop : 50% environmental impact reduction
MAIN FEATURES
• Proven Design life 30 years +• Comfort optimization : natural light
and solar protection • Texyloop recycling: production of
2nd generation materials
APPLICATIONS
• Major construction projects• Tensile roofs and structures• Large free span and anti clastic shapes
Cov
er p
ictu
re: O
L S
tadi
um -
Lyo
n - F
ranc
e •
©P
opul
ous
– In
tens
-Cité
Pré
cont
rain
t TX3
0 is
a S
erge
Fer
rari
sas
regi
ster
ed tr
adem
ark.
Ref
178
3. M
ai 2
014/
V1.
01 •
Jea
n Va
sseu
r Com
mun
icat
ion
GB
Précontraint TX30 - II
Précontraint TX30 - III
Précontraint TX30 - IV
Précontraint TX30 - V Standards
Application Static and permanent structures - Tropical climatesSurface coating CROSSLINK PVDFLife expectancy > 30 yearsTechnical propertiesHT polyester cables 1100 Dtex 1100/1670 Dtex 1100/2200 Dtex 1670/2200 DtexWeight 1050 g/sqm 1050 g/sqm 1350 g/sqm 1500 g/sqm EN ISO 2286-2Width 178 cm 178 cm 178 cm 178 cm (+1mm /-1mm)Tensile strength (warp/weft) 430/430 daN/5cm 560/560 daN/5cm 800/700 daN/5cm 1000/800 daN/5cm EN ISO 1421Tear strength (warp/weft) 55/50 daN 80/65 daN 120/110 daN 160/140 daN DIN 53.363Adhesion 12 daN/5cm 12 daN/5cm 13 daN/5cm 15 daN/5cm EN ISO 2411Flame retardancyEuroclass B-s2,d0 B-s2,d0 C-s2,d0 C-s2,d0 EN 13501-1
Rating Depending on the type, other fire certificate/country on demandM2/NFP 92503, B1/DIN4102-1, NFPA 701, CSFM T19,...
> The technical data here above are average values with a +/-5% tolerance
ADDITIONAL INFORMATIONAssembly Weldable after abrasionTotal thickness 0.78 mm 0.78 mm 1.02 mm 1.14 mmMicro organism resistance Degree 0, excellent Degree 0, excellent Degree 0, excellent Degree 0, excellent EN ISO 846 Method ADimensional stabilityElongation 24h - 10 daN/5 cm (warp/weft) <1%/<1% <1%/<1% <1%/<1% <1%/<1% EN15977Residual elongation <0.4%/<0.4% <0.4%/<0.4% <0.4%/<0.4% <0.4%/<0.4% EN15977Solar optical valuesSolar Transmittance (Ts) 10 % 9 % 7 % 6 %Solar reflectance (Rs) 75 % 75 % 76 % 76 %Solar Factor (g) 14 % 13 % 11.5 % 10.5 % EN 410Visible light Transmittance (Tv) 8 % 7.5 % 5.5 % 5 %Visible light Reflectance (Rv) 84 % 84 % 85 % 85 %UV transmission 0% 0% 0% 0%Thermal and Acoustic performancesThermal conductivity (vertical/ horizontal) ca. U=5.6 / 6.4 W/sqm/°C CalculatedAcoustic weakening index ca. 14dBA ca. 14dBA ca. 15dBA ca. 16dBA ISO 140-3 & ISO 717-1LEED Heat island EffectSolar reflectance index SRI > 90% SRI > 90% SRI > 90% SRI > 90% SSc 7.2/7.1 (Roof/Non Roof)
> The values here above are given as an indication. Our products are subject to changes prompted by technological developments. We reserve the right to modify their characteristics at any time. The buyer of our products is responsible for checking the validity of the above data.
www.sergeferrari.com
Environmental impacts: LCA and LEED reports available on request
Certifications, labels, recycling capacity
Management systemsQuality in conformity with ISO 9001
Visible light transmission > TV = 8%
Transmission of solar energy > G = 12%
Précontraint TX30-II
→ Contact • Headquarters:
+ 33 (0)4 74 97 41 33 • Your local representative:
www.sergeferrari.com
→ • The Serge Ferrari operational recycling chain • Secondary raw materials of high intrinsic value compatible with multiple processes • A quantified response to combat depletion of natural resources www.texyloop.com
Profil See the brochure
Mechanical strength evolution
30YEAR PVC – A coating formula to stand the test of time
The 30YEAR PVC coating formula provides and outstanding mechanical longevity
The mechanical longevity is directly linked to the quality of the coating which protects the yarns. The Précontraint TX30 longevity is served by:
• A 30YEAR PVC coating formula resistant to the erosion generated by weather agressions ( UV, rain…),
• A thicker coating at the top of micro-cables thanks to the Serge Ferrari Précontraint technology®.
Natural light for architecture
The new generation of composite material Précontraint TX30 has been developed to meet the mechanical and aesthetical longevity requirements of the most demanding projects. In addition to the proprietary Précontraint technology benefits, the Précontraint TX 30 material combines an ultra resistant 30YEAR PVC coating formula and a CROSSLINK PVDF top coat.
Exclusive Précontraint Serge Ferrari® technology
The Serge Ferrari exclusive technology, patented worldwide, provides unique properties to the Précontraint composite membrane compared to conventionally coated materials.
• The polyester micro-cables are tensionned in both directions during the coating process for greater dimensional stability and consistency.
• The Précontraint base cloth is therefore more flat and better protected by a high thickness coating at the top of the polyester micro-cables.
To observe the Précontraint TX 30-II translucency here under, hold this page up against a light source.
CROSSLINK TOP COAT for durable aesthetics
The CROSSLINK top coat formula generates irreversible links between molecular chains. This tridimensionnal network provides long term benefits:
• higher resistance to photo oxidation and micro-cracks,
• stable and smoother surface to prevent dirt in-grain,
• easier and more efficient cleaning of the even surface.
CROSSLINK Top coat formula
Surface evolution: Microscopic observation
Product reference Standard PVC Précontraint TX30
Top coat treatment Standard PVC Formula 30YEAR PVC Formula
Cross section after accelerated Weathering test 7500 H - 30 Year Florida Eq
Coating thickness at the top of the yarns 7500 H - 30 Year Florida Eq
Exposed yarns, not protectedHigh erosion
Highly protected yarnsVery limited erosion
1mm
PVDF top coat CROSSLINK PVDF top coat
Product reference Standard PVC Précontraint S2 Précontraint T2 Précontraint TX30
Top coat PVDF weldable without abrasion
PVDF weldable without abrasion
Calibrated PVDF weldable after abrasion
CROSSLINK PVDF weldable after abrasion
Accelerated weathering 2.500 H - 10 year Florida Eq
Accelerated weathering7.500 H - 30 year Florida Eq
LARGE SHOT Yarns protection7.500 H – 30 year Florida Eq
Lots of micro cracks and exposed yarns – Irreversible
degradation
Lots of micro cracks and dirt build up
Limited micro cracks and dirt build up
No micro cracks, aesthetics is preserved, easy cleaning
1mm
1mm
The here above data are extracts from a long term accelerated weathering test based on ISO 10640. The weathering protocol was validated by comparing outdoor exposed and artificially weathered materials. Study available on demand.
100908070605040302010
0
Tensile strength evolution (%)
Exposure time (hours)0 3 500 h - 14 years eq. 7 500 h - 30 years eq.
Précontraint TX30-II
Standard PVC/PVDF
230 micron protection
> Better protection of the base cloth against UV and erosion.
Mechanical resistance stability (Similar for Précontraint S2 and T2)
Précontraint TX30
Standard PVC/PVDF
130 micron protection
> Less protection of the base cloth against wear and erosion.
Loss of mechanical properties
TX30-II 3000
TX 30 I - II – III – IV and V samples are available on demand.
The mechanical strength has been measured at different intervals during the accelerated weathering.
Précontraint TX30 maintains a better mechanical resistance after 30 years thanks to a better protection of the polyester micro-cables.
PVDFTop coat
CROSSLINKPVDFTop coat
Polyester micro-cables
Polyester micro-cables
Coating Coating
2024
U.V.resistant
Long life
The buyer of our products is fully responsible for their application or their transformation concerning any possible third party. The buyer of our products is responsible for their implementation and installationaccording to the standards, use and customs and safety rules of the countries where they are used. Concerning the contractual warranty, please refer to the text of our warranty.
The values here above mentionned are the results of tests performed in conformity with the use and customs in terms of studies, they are given as an indication in order to allow our customers tomake the best use of our products. Our products are subjects to evolutions due to technical progress, we remain entitled to modify the characteristics of our products at any time. The buyer of ourproducts is responsible to check that the here above data are still valid.
100%recyclable textile
Customgraphics
Précontraint®
Ferrari®
Specification ServiceThe Ferrari® specification service is available to inform you, advise you andsuggest innovative solutions for yourspecific requirements.
To detail your project, fill in a form under:www.ferrari-architecture.com
Sustainable developmentFerrari® development is based on strict adherance to good safety andenvironmental practices. This includes anunderstanding of Life Cycle Analysis (LCA),selection of the best materials, and eco-design. The Company obtained its first ISO14001 certification in 2003.
100% recyclable Ferrari® developed the Texyloop®
technology specifically for the recyclingof composite PVC membranes and textiles. Through the management of itsend-of-life products Ferrari® is committedto sustainable development.www.texyloop.com
10 year warrantyfixed structures only
(upon request)
Technical properties Précontraint® 392S Standards
Yarn 1100 dtex PES HTWeight 820 g/sqm EN ISO 2286-2Width 180 cm (-1/+1 mm)Tensile strength (warp/weft) 300/300 daN/5 cm EN ISO 1421Tear strength (warp/weft) 60/60 daN DIN 53.363Adhesion 8 daN/5 cm EN ISO 2411Porosity +/- 27%Flame retardancy M2/NFP 92.507 • B1/DIN 4102-1 • M2/UNE 23.727
CSFM T19 • VKF5.3/SN 198898 • TEST2/NFPA 701Surface treatment Formula S / Weldable calibrated PVDF alloyProduct application Textile structures
The technical data here above are average values with a +/- 5% tolerance.
Additional informationCoating thickness at the top of the yarns 215 µ (warp) / 300 µ (weft)Total thickness 1.35 mmEfficiency in wind 81% XPG 39-100-3
Measurements carried out at the CMEFE in Geneva, sample 25x35 cm
Solar and light properties EN ISO 410Solar Transmission TS 34%Solar Reflexion RS 57%Solar Absorption AS 9%Solar Factor FS(g) 37%Visible light Transmission TV 34% Visible light Reflexion RV 60% Extreme working temperatures -30°C / +70°C in static positionQuality management system ISO 9001* Those data are obtained by calculation through simulations of the average conditions of use, those values must be considered as approximation.
is a
Fer
rari®
regi
ster
ed t
rade
mar
k.S
tudi
o Fe
rrar
i - G
B 1
767
- Ju
ly 0
9/V
1.01
Cov
er p
hoto
: Boo
ksto
re -
Ariz
ona
Sta
te U
nive
rsity
- U
SA
Pho
to: F
erra
ri S
A
FERRARI SALa Tour du Pin - FRANCETel: +33 (0)4 74 97 41 33Fax: +33 (0)4 74 97 67 20
STAMOID AGEglisau - SWITZERLANDTel: +41 (0)44 868 26 26Fax: +41 (0)44 868 27 27
EUROPEFERRARI TEXTILES CORP.Florida - USATel: +1 954 942 3600Fax: +1 954 942 5555
NORTH AMERICAFERRARI DUBAIDubai - U.A.ETel: +971 4 886 5506Fax: +971 4 886 5507
MIDDLE EASTFERRARI CHINAShanghaiTel: +86 21 6211 6936 Fax: +86 21 6211 6389
CHINAFERRARI HONG-KONG LTDHONG-KONGTel: +852 3622 1340Fax: +852 3622 1354
ASIA - PACIFICFERRARI LATINOAMERICA S.A.Santiago - CHILETel: +56 2 737 0909Tel: +56 2 737 2818
São Paulo - BRAZILTel: +55 11 3262 3405Mexico - MEXICOTel: +52 55 5018 5742
LATIN AMERICA