KODOVI ZA SAMSUNG MOBILNE TELEFONE! › KISIN-Company
-
Upload
husejin-mehmedovic -
Category
Documents
-
view
223 -
download
0
Transcript of KODOVI ZA SAMSUNG MOBILNE TELEFONE! › KISIN-Company
-
7/31/2019 KODOVI ZA SAMSUNG MOBILNE TELEFONE! KISIN-Company
1/4
KODOVI ZA SAMSUNG MOBILNE TELEFONE! KISIN-Company
1/4kisin-company .com/2011/12/kodovi-za-samsung-mobilne-telefone/
kisin-company.com http://kisin-company.com/2011/12/kodovi-za-samsung-mobilne-telefone/
KODOVI ZA SAMSUNG MOBILNE TELEFONE! KISIN-Company
by severin
Kodovi za Samsung mobilne telefone
*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters
*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but also
change IMEI to 447967-89-400044-0, you must use CHGIMEI to
restore it)
*2767*2878# -> Custom EEEPROM Reset
*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast
*#9998*544# -> Jig detect
*#9998*636# -> Memory status*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors
http://kisin-company.com/wp-content/uploads/2011/12/download-2.jpghttp://kisin-company.com/wp-content/uploads/2011/12/download-2.jpghttp://kisin-company.com/wp-content/uploads/2011/12/download-2.jpghttp://kisin-company.com/wp-content/uploads/2011/12/download-2.jpghttp://kisin-company.com/wp-content/uploads/2011/12/download-2.jpghttp://kisin-company.com/wp-content/uploads/2011/12/download-2.jpghttp://kisin-company.com/author/severin/http://kisin-company.com/wp-content/uploads/2011/12/download-2.jpghttp://kisin-company.com/author/severin/http://kisin-company.com/2011/12/kodovi-za-samsung-mobilne-telefone/ -
7/31/2019 KODOVI ZA SAMSUNG MOBILNE TELEFONE! KISIN-Company
2/4
2. 10. 2012.KODOVI ZA SAMSUNG MOBILNE TELEFONE! KISIN-Company
2/4kisin-company .com/2011/12/kodovi-za-samsung-mobilne-telefone/
*#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator
*#9998*862# -> Vocoder Reg
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk
*#9998*9266# -> Y ann debug screen (=Debug Screens?)
*#9998*9999# -> Software version
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown
Samsung SGH-600, 2100, 2200, 2400
To display IMEI type *06#
1. Software Version : *#9999# and *#0837#
(instructions)
2. Serial Port Info : *#0001#
3. Batt./Temp. Meter : *#0228#
4. Sim Card Info : *#0778#
5. SIM capacity display: *#0746#
6. Memory error : *#0377# Use side keys to
select values. Cancel and ok.
7. Error Message : *#0785#. If ok is pressed
the phone will reset and
register this on the memory error.
8. Alarm Tone Adjust : *#0289#
9. Date/Time Log : *#0786# Last up and down.10. Memory Info : *#0246#
11. LCD Contrast : *#0523# Only with version
G60RL01W.
12. Network Monitor : *#0324#
13. Memory Usage : *#0636#
14. Trace Watcdog : *#0427#
15. Buzzer adjust : *#0289#
16. Phone Parameter : *#0862# Normal, Earphone orcarkit can be
selected.
17. Activate light & Vibra : *#7698# Flash the
-
7/31/2019 KODOVI ZA SAMSUNG MOBILNE TELEFONE! KISIN-Company
3/4
2. 10. 2012.KODOVI ZA SAMSUNG MOBILNE TELEFONE! KISIN-Company
3/4
screenligth during 10 seconds,
the activation of vibration system.
18. Activate smiley. : *#9125# Activates the
smiley when charging.
Unidentified Code:
*#0872# Diag? Parameter can be changed with sidekeys.
*#0544#: Jig detect ?
*#0364# Watchdog ?
NB! Since version G60RL23M , it seem that only *#06# , *#0001#
e *#9999#, works.
Pin-Out 1- GND 2- RS232 TXD 3- RS232 RXD 4- RS232 RTS 5- MAX 4.2 IN ??? 6- GND 7-
GND 8- SPK OUT 9- SPK + OUT 10- SCL I2C comm proprietary bus 11- SDA I2C comm
proprietary bus 12- RS232 CTS 13- VCC 5V OUT 14- DC 9V IN 15- DC 9V IN 16- MIC + IN
17- MIC IN 18- +3.6V IN battery 19- GND 20- Antenna 21- Antenna 22- GND 23- GND 24-
n.c. 25- Temperature sensor IN 26- +3.6V IN battery 27- GND 28- GND
SP-unlock SGH-600
*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
*2767*2878# -> Custom EEPROM Reset
These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600
Samsung SGH-600 / SGH-2100 Mobile Home
*#9998*228# -> Battery status (capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors if ok then phn is reset, info is put in memory
error. *#9998*786# -> Run, Last UP, Last DOWN
-
7/31/2019 KODOVI ZA SAMSUNG MOBILNE TELEFONE! KISIN-Company
4/4
2. 10. 2012.KODOVI ZA SAMSUNG MOBILNE TELEFONE! KISIN-Company
kisin-company .com/2011/12/kodovi-za-samsung-mobilne-telefone/
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator Flash the screenligth during 10 seconds and vibration
activated.
*#9998*862# -> Vocoder Reg Normal, Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk
*#9998*9266# -> Y ann debug screen (=Debug Screens?)
*#9998*9999# -> Software version
If the up Codes doesnt work, you should change *#9998* to *#0. i.e. *#9998*523# change to
*#0523#. An other thing that will help is to remove your simcard.
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown
SP-unlock SGH-600 and SGH 2100
*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI
program found on the software page.
*2767*2878# -> Custom EEEPROM Reset
(KODOVE UNOSITE NA VLASTITU ODGOVORNOST)
Sline vijesti: