KL Overview 2005
-
Upload
sudhakar-veeraiyan -
Category
Documents
-
view
216 -
download
0
Transcript of KL Overview 2005
-
8/2/2019 KL Overview 2005
1/3
Overview of SubseaPipeline Engineering
Kuala Lumpur 18-20 October 2005
Learn ...
All the essential factsThe course covers all facets of pipeline engineering construction including
the complete life cycle from design and operation to decommissioning
Valuable advice
Industry best practice
How to improve your project
Bring your project-specific questions to raise at the course.
You will learn the engineering techniques used globally to deliver
successful projects
Our tutor is a practising Chartered Engineer involved in subsea pipeline
engineering. He routinely uses the latest techniques on major international
projects so can advise on industry best practice
And take away:
Colour reference notes
Receive a complete set of bound notes to support you throughout yourcareer.
A unique, comprehensive training course for oil and gas pipelineprofessionals.
This unique course gives you the opportunity to network with other industry professionals.
Take away a complete and up-to-date knowledge of pipeline engineering.
A gateway to a range of more specialised courses (details at www.tja.co.uk)
Bookyour place now.
Book by 23September
get a FREECourse Notes CD-ROM
-
8/2/2019 KL Overview 2005
2/3
Pipe Size and route
Route selection
Diameter sizing
Rigid steel pipe manufacture
Wall thickness
Hydrostatic collapse
Materials selection
Coatings and thermal design
Corrosion protection On-bottom stability
Thermal insulation
Pipe in pipe systems
Active heating of lines
Advanced design
Limit state design
Lateral and upheaval buckling
HP/HT and HIPPS
Fishing interaction
Diverless systems
Titanium and composites
S-lay
S-lay process
Vessels and market
Welding and NDT
Insulated pipe
Lay curve control
Are you involved in oil and gas
industry pipelines? Could you makeuse of a complete picture of subseapipelines and the latest technology?Then this course is for you.
Written, presented and kept up-to-date by practising charteredengineers, the overview coursepresents in plain language the lifecycle of subsea pipelines, from designand installation through to operationand decommissioning.
DAY 1
J-lay
J-lay process
Vessels and market
Rapid pipe welding
Connectors
J-lay from drilling rig
Catenaries
Catenaries group exercise
Bundles Design of bundles
Fabrication
Towheads
Insulation and heating
Re-usable bundles
Deep water
Reel-lay
Reel lay process
Vessels and market
Special considerations
Ovality, cumulative strain
Flexibles
Installing unbonded flexibles
Umbilicals
Bonded hoses
DAY 2
Construction support
Landfalls
Trenching and burial
Pre-commissioning
Risers
Riser types and users
Deep water development
Flexible pipe design and manufacture
Flexible risers Hybrid risers
Rigid risers
Titanium and GRP
Routine operations
Operation controls
Additives
Pigging
Integrity management
Risk-based inspection plan
External survey
Intelligent pigging
Anomaly assessment
Remedial works
Modification and repair
Isolation, Tie-ins
Mechanical spools
Hyperbaric welding
Decommissioning
DAY 3
WHO SHOULD ATTEND
Anyone who has an interest in subseapipelines
Past delegates have come from
operators, contractors, suppliers andregulatory authorities
A very well prepared course,presented by very knowledgeabletutors. I would definitely recommend
it to others.
Liz Burns, Support Team Leader, BP
Now in 9th year
Updated throughout (as always)
Notes available in searchableelectronic format
-
8/2/2019 KL Overview 2005
3/3
Course venue: Le Meridien Kuala Lumpur
2 Jalan Stesen Sentral, Kuala Lumpur
Sentral, 50470, Kuala Lumpur, Malaysia.
The course usually runs from 9.00 am to
5.00 pm each day. Registration is 8.30 to
9.00 am the first day. Lunch and
refreshments are included.
Please book early to avoid disappointment
ALAN KNOWLES EUR ING BSC CENG MICE
Alan Knowles has worked for over 20 years in construction
and project engineering of pipelines for the offshore oil and
gas industry. His experience covers pipelay, bundles,
trenching, survey, river crossings, single point and
conventional buoy moorings, cables, repair lining and
decommissioning. Currently, Alan is involved with
construction consultancy and training.
HOW TO BOOK
GENERAL
The booking form constitutes a legally binding
contract.
Bookings and cancellations must be in writing
Trevor Jee Associates reserves the right to refuse
admission if payment has not been received prior to
the event.
Trevor Jee Associates will hold your data on computer
under the terms of the Data Protection Act.
We reserve the right to make changes if necessary.
In the unlikely event that we have to cancel the
course, we will refund you in full, but will disclaim
any further liability.
SUBSTITUTION
If you are unable to attend, you are welcome to
substitute another person without penalty at any
time.
TRANSFER
You may transfer to another course at any time as
long as your payment has been received. If you
transfer more than 2 weeks before the course, there
is no penalty. If you transfer within 2 weeks of the
course, a fee of 150 + VAT is payable.
CANCELLATION OR FAILURE TO ATTEND
You may cancel a course at any time. If you do so
more than 2 weeks before the course, there is a
charge of 50 + VAT. If you cancel within 2 weeksof the course or fail to attend, 200 + VAT is
payable.
FAX this page to +44 (0) 1892 544735
WEB secure credit card booking viawww.tja.co.uk/crs/overview
TUTORS VENUE
The second and subsequent
delegates from the same companycome for US $2,375 (1,350) each.
CORPORATE DISCOUNTSPRICES
The price is US $2,900.
If you wish to pay by credit card thecharge will be made in sterling at 1650.
QUESTIONS?
Call Linda Hammond on
+44 (0) 1892 544727
BOOKING CONDITIONS
On completion of the course, delegates
receive a course certificate with the number
of contact hours for their Continuing
Education Program record.
CONTINUING EDUCATION
[ ] Please invoice my company payable prior to the course
[ ] Please debit ..... from my Access/Visa/Mastercard/Amex/Diners
Card No:_ _ _ _ / _ _ _ _ / _ _ _ _ / _ _ _ _ / _ _ _ _
Valid from:_ _ / _ _Expiry date:_ _ / _ _Issue No :_ _ _Security Code:_ _ _(Switch only) (on reverse of card)
Cardholders signature: .......................................................................................
Name: ..................................................................................................................(as it appears on card)
DELEGATE DETAILS
Company: ............................................................................................................
Address: ..............................................................................................................
County/State: .......................................................................................................
Country: ...................................... Post/Zip code: ..............................................
Tel: ....................................................... Fax: .....................................................
Company contact: ...............................................................................................
Job title: ..............................................................................................................
E-mail address: ...................................................................................................
Signed: ................................................................................................................
COMPANY DETAILS
PAYMENT DETAILS
Course Title: Overview of Subsea PIpeline Engineering, Kuala Lumpur
Name: ..................................................................................................................
Job title: ..............................................................................................................
E-mail address:...................................................................................................
More delegates? - please attach a list