Kit Memoria DDR 2GB 400MHz Kingston - Manual Sonigate

1
DESCRIPTION: ValueRAM's KVR400X64C3AK2/2G is a kit of two 128M x 64-bit (1GB) DDR400 CL3 SDRAM ( Synchronous DRAM) memory modules. Total kit capacity is 2GB (2048MB). The components on each module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. Each 184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and mechanical specifications are as follows: FEATURES: Clock Cycle Time (tCK) 5ns (min.) / 10ns (max.) Row Cycle Time (tRC) 55ns (min.) Refresh Row Cycle Time (tRFC) 70ns (min.) Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.) Single Power Supply of +2.6V (+/- .1V) Power (IDD0) 5.408 W (operating) Operating Temperature 0 o C to 70 o C Storage Temperature -55 o C to +150 o C UL Rating 94 V - 0 Document No. VALUERAM0319-001.A00 10/30/03 Figure 1: KVR400X64C3AK2/2G 184-Pin DIMM KVR400X64C3AK2/2G 2GB (128M x 64-Bit x 2 pcs.) DDR400 CL3 184-Pin DIMM Kit Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.250" (31.75mm).

description

Units : Inches (Millimeters) (31.75) (17.80) (10.00) (00.00) 2.175 1.250 0.700 0.393 0.000 0.0078±0.006 (0.20±0.15) (6.62) 0.26 0.100 (2.50 ) 0.039 ±0.002 (1.000 ±0.050) 0.1496 0.071 (1.80) 0.050 (4.00) 0.1575 (1.270) (3.00) 0.118 (3.80) (2.00) 0.0787 1

Transcript of Kit Memoria DDR 2GB 400MHz Kingston - Manual Sonigate

Page 1: Kit Memoria DDR 2GB 400MHz Kingston - Manual Sonigate

��������������� ��� �����

DESCRIPTION:

ValueRAM's KVR400X64C3AK2/2G is a kit of two 128M x 64-bit (1GB) DDR400 CL3SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 2GB (2048MB). Thecomponents on each module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR400SDRAM in TSOP packages. Each 184-pin DIMM uses gold contact fingers and requires+2.6V. The electrical and mechanical specifications are as follows:

FEATURES:

Clock Cycle Time (tCK) 5ns (min.) / 10ns (max.)Row Cycle Time (tRC) 55ns (min.)Refresh Row Cycle Time (tRFC) 70ns (min.)Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.)Single Power Supply of +2.6V (+/- .1V)Power (IDD0) 5.408 W (operating)Operating Temperature 0o C to 70o CStorage Temperature -55o C to +150o CUL Rating 94 V - 0

Document No. VALUERAM0319-001.A00 10/30/03

Figure 1: KVR400X64C3AK2/2G 184-Pin DIMM

KVR400X64C3AK2/2G2GB (128M x 64-Bit x 2 pcs.)

DDR400 CL3 184-Pin DIMM Kit

Note: The module defined in this data sheet is one of several configurations available under this part number. Whileall configurations are compatible, the DRAM combination and/or the module height may vary from what is describedhere. However, in no configuration will the module height exceed 1.250" (31.75mm).

������

������

�����

������

����

��

��

��

����

��

�����

������ ���������� �����

�����

���

���

������

������������ ����

���������

������� ����������� ������

������

���

��������

�� ��

���������

�����������

� ���������

������

�����

������

����

��

����

��

����

���

����������������������������

������