Kimmco Insulation

8/10/2019 Kimmco Insulation

1/7

KIMMCO BUILDING ROLL (KBR)

Description: KIMMCO building rolls are manufactured from stable glass fibres bonded withthermosetting resins. They are light in weight, strong, resilient and easy to handle.Applications: For thermal and/or acoustic insulations of all buildings walls and roofs.Facing & Covering: KIMMCO building rolls are available unfaced or with a variety of facings tosuit the applications: white vinyl, FSK, metallized polyester, Kraft paper and glass tissue.

Availability Thickness (mm) Width (m) Length (m)

Rolls

25 mm

0.4, 0.6, 1.0, 1.2

10 - 45 m

According to thethickness & density

Performances: WORKING TEMPERATURE: Fibre 230 C; FSK 100 C; Vinyl 80 C; Metallized polyester80 C.PERMANENCE: Dimensionally stable under varying conditions of temperature and humidity, rotproof, odourless, non-hygroscopic and will not sustain vermin or fungus; Longer life due to no sag

and settling.


2/7

Typical Fixing Details

Wall construction of lightweight metal sheeted buildings is frequently un-insulated, leading toextremely uncomfortable working conditions or excessive cooling requirements. KIMMCOBuilding Roll can be fitted to new and existing buildings to alleviate these problems.

New Construction

KIMMCO Building Roll is fixed at the head of the wall and allowed to drape down the length. Theinsulation roll may be fixed to sheeting rails with the faced side to the inside of the building if nolining sheets are to be used or alternatively by trapping the insulation between external and

internal sheeting. Spacer bars of non compressible material should be used to prevent unduecrushing of the insulation.

Existing Buildings

KIMMCO Building Roll may be installed from within existing buildings by using a "T" bar suspensiongrid and liner sheets. The insulation can be cut to suit the size of lining sheet and fixed to theback of the sheet with adhesive or mechanical fasteners. The lining is then installed in the gridsystem in the normal manner.

As an alternative to the above, timber packing strips may be cut to suit the sheeting rails and

screwed in place. Fix the building roll at the head of the wall by screws into the timber packerwith a steel strip placed on top of the insulation directly over the packer. Repeat as required atother sheeting rail locations, ensuring that the building rolls are closely butted to each other withthe edge flanges overlapping.

Read more: KBR Insulation Catalogue

http://www.kimmcoinsulation.com/kimmco/english/glasswool-kbr.asp
http://www.kimmcoinsulation.com/kimmco/english/images/Catalogues/KBR.pdfhttp://www.kimmcoinsulation.com/kimmco/english/images/Catalogues/KBR.pdfhttp://www.kimmcoinsulation.com/kimmco/english/images/Catalogues/KBR.pdfhttp://www.kimmcoinsulation.com/kimmco/english/images/Catalogues/KBR.pdf


3/7

KIMMCO KALINING (KKL36) FOR WALL

Description: KL36 is a thermal-acoustical insulation system for walls of residential houses andcommercial buildings. The system consists of a rolled Glasswool panel and metal accessories.The metal accessories are forming a framework to support the finishing elements (plasterboard).

Application: Thermal and acoustic insulation for retrofit walls of residential houses andcommercial buildings.

Facing & Covering: Kraft Paper.


Boards 50 - 85 mm 1.2 5.4 - 10

Performances : FIRE SAFETY: Base fibres are non-combustible when tested in accordance withBS 476 (part4), ASTM E 84, 136.MOISTURE ABSORPTION: Less than 1% by volume when tested in accordance with BS 2972 or6676, ASTM C 553. KIMMCO Kalining does not absorb moisture from the ambient air not water by

capillary attraction. Only water under pressure can enter the insulation products, but that willquickly dry out owing to the material's open cell structure.NON TOXIC: KIMMCO Kalining 36 is not hazardous to health. ACOUSTICS: ASTM C 423 - MountingA as per ASTM E 795

Installation: Depending on the type of construction site, 2 to 6 m2 per hour. Insulation is cut as per distance between floor and ceiling increased by 1 cm. Plasterboard length will be as per distance between floor and ceiling minus 1 cm


4/7

KIMMCO FACADE INSULATION (KFI)

Applications: Thermal and acoustic insulation for non-load-bearing exterior wall cladding.Facing & Covering: Un-faced, BGT and FSK.


Boards 25 - 150 mm 0.6 1.2

KIMMCO ENCAPSULATED CEILING BOARDS (KECB)

Applications: Acoustic insulation for false ceiling applications in airports, hospitals, entertainmentmalls and commercial complexes.


5/7

Facing & Covering:Encapsulated PE bag.


Boards 25 - 100 mm 0.6 1.2


6/7

KIMMCO LAMELLA INSUL (KLI)

Description : KIMMCO Lamella Insul is manufactured from stable glass fibres bonded withthermosetting resins. The fibres are oriented perpendicular to the plane of adhering facingmaterial. Easy to handle and supplied in roll form.

Applications: KIMMCO Lamella Insul is designed for thermal insulation of pipes, ducts and vessels.KIMMCO Lamella Insul is suitable for wide range of applications in HVAC and industrial sectorsuch as:On large pipes, pipe cluster, or over heating traces, where performed insulation is notappropriate.On round or oval duct work, square, or rectangular ducts, where the full insulation thickness oncorners is to be maintained.On tanks and vessels of various types, particularly under metal cladding or as an additional layerover existing insulation.Over decorative roof surface such as demos, arches, etc.Where load bearing characteristics of insulation are required.

Facing & Covering: ASJ, Aluglass, FSK.


Rolls

25

50

75

100

1.2

1.2

1.2

1.2

Up to 10

Up to 10

Up to 7.5

Up to 5


7/7

Facing &Covering

Performances SERVICE TEMPERATURE: Fibre - up to and including 230 C / Foil Face - 100 C.PERMANENCE: Dimensionally stable under varying conditions of temperatureand humidity, rot proof, odourless, non-hygroscopic and will not sustainvermin or fungus.FIRE SAFETY: Base fibres are non combustible when tested in accordance withBS 476 (part 4), ASTM E 136 procedures. Glass reinforced aluminium/Kraftlaminate facing (FSK) are UL classified as follow: Flame spread: 15 Smokedeveloped: 0 When tested according to ASTM E 84 procedure.MOISTURE ABSORPTION: Less than 1% by volume when tested in accordancewith BS 2972 or 6676, ASTM C 553, KIMMCO Lamella Insul does not absorbmoisture from the ambient air not water by capillary attraction. Only waterunder pressure can enter the insulation products, but that will quickly dry outowing to the material's open cell structure.VAPOUR PERMEABILITY: FSK and ASJ used with KIMMCO Lamella Insul achievea permeance of 0.02 perms when tested according to ASTM E 96, desiccantmethod.

NON TOXIC: KIMMCO lamella Insul is not hazardous to health.NO CORROSION: Does not cause or accelerate corrosion of steel, copper oraluminium.FLEXIBILITY: KIMMCO Lamella Insul will permit expansion and contractions ofthe metal pipe, duct or vessel without cracking or shrinking.

Kimmco Insulation

Documents

Transcript of Kimmco Insulation