For racing or cruising,Boomkicker is an econo-mic, easy, light and perfor-ming system for boats up to12 m (40 ft).

w w w . s p a r c r a f t . c o m

� Fast response & near constantforce vang efficiency� Light weight� Gain improved boat performance� Easy installation� Maintenance free� Five size

BoomkickerSimple, economic & performing

SPARCRAFT

� Five sizes to suit yachts up to 12 mtr /40 ft l.o.a.

� You will find many reasons to appreciatethe Barton Boomstrut. No more topping lifthassles, no adjustments and no hang ups.Never again will the boom fallaccidentally.

� Gain improved boat performance withless weight and windage aloft.

� Light weight

� Maintenance free & easy installation

� Pulling the boom down causesthe Boomkicker to flex upwards,releasing straightens the rods therebylifting the boom.

� The lightweight, low profiledesign features two coated flexiblefibreglass rods which provide theforce to support the boom.

5 sizes for Racing or cruising

Boomkicker : maestro!

Boomkickercompressed,vang stretched

Boomkicker extended,vang free

B o o m

B o o m

Ma

st

Ma

st

© Barton

© Barton

Bo

om

kic

ker

up

to

40

fts

SPARCRAFT

Maintenance free & easy installationCarefully designed and construtedBoomkicker solution� The lightweight, low profile designfeatures two coated flexible fibreglassrods which provide the force to supportthe boom.� Pulling the boom down causes the Boomkicker to flexupwards, releasing straightens the rods thereby lifting the boom.

� Each Boomkicker is supplied with comprehensive and easy tofollow fitting instructions. All fastenings required are included.

� The boom fitting is contoured to fit both round and flat boomsand the mast fitting can slide in Boomkicker luff grooves toavoid drilling.� For ease of installation and rigging, the Boomkickermounts independently inside the existing kicking strap tackle.There is no requirement to replace existing hardware, just fit theBoomstrut and remove the topping lift.

� The Boomkicker has been carefully designed and constructedto eliminate sharp edges, minimiseparts and provide ease of installa-tion. All parts are from high gradestainless steel and aluminium“Spectro” grey anodised for goodlooks and durability.

SPARCRAFT

Suggested modelBoomkicker

Ref. Sparcraft

Boat length(m)

Boatlength (ft)

Pin to pinLength(mm)

Max rodscan be

reduced*(mm)

Maxinitial Full

Adjustment**

Max strokeat full

adjustment***

Force(kg)

37560.500.135 6 m maxi. 20’ maxi 960 150 300 150 90

37560.750.135 6 à 7,50 m 20’ à 25’ 1070 150 300 150 140

37561.000.165 7,5 à 9 m 25’ à 30’ 1180 150 300 150 185

37561.250.195 9 à 10,5 m 30’ à 35’ 1320 150 400 200 230

37561.500.195 10,5 à 12 m 35’ à 40’ 1450 150 400 200 270

Boomkicker

* At minimum pin - pin length ** Maximum stroke at initial pin - pin*** Maximum stroke at min. pin - pin. Stroke is travel flexed. 2.5 cm of stroke equates toapprox. 18 cm at end of boom.

� Maintenance freedurable design eli-minates friction andsliding parts

� Patented flexingspring provides fastresponse and a near constant forcefor vang efficiency

� Easy installation independent ofexisting kicking strap. No need toreplace existing hardware

� Simple to follow fitting instruc-tions and all fastenings included

� Mast fitting can use the luff grooveto eliminate drilling

� Five sizes

� Light weight maintenance free

Sparcraft 4-8 rue Blaise Pascal Zone industrielle 17185 PERIGNY France Tél. +33 (0)5 46 45 90 45 Fax +33 (0)5 46 45 36 59 e-mail : contact@sparcraft.com

Votre agent SparcraftYour Sparcraft agent

Doc

umen

t non

con

tract

uel/

Non

con

tract

ual d

ocum

ent