khaled Updated Resume
-
Upload
khaled-shehata -
Category
Documents
-
view
100 -
download
0
Transcript of khaled Updated Resume
Page 1 of 2 References available upon request
Career History Current position (Since January / 2015) Job Title: QA/QC Engineer Department: Quality Department Employer: Saudi Metal Art Work Co. Arabian Roots Group – Jeddah KSA Job Responsibilities:
Prepare inspection and test plans (ITP), QC inspection reports, and acceptance criteria according to project specifications with respect to International standards such as AWS, ASME, ASTM, and ISO.
Check approved shop drawing received from consultant or client repetitive. Prepare welding book (WPS, PQR, and Welders prequalification) to be submitted to
consultant with Material submittals (MTS) and Document submittals (DCS). Hold receiving inspections activities for fabrication raw materials (Material grades sorting
using Portable Spectrometer and Mechanical tests such as hardness and tension test). Inspection of Steel Structure Fabrications for Dimensional and Fit-up check. Checking painted / coated steel surfaces (coating thickness, zinc content and surface finish). Inspection of welding joints and connections as per AWS (Visual check, NDT such as Die
penetration test, Ultrasonic and X-rays radiography). Perform tests and inspections to be witnessed by third parties as per customer requirement. Responsible for submitting MIR to consultant and get product release to be sent to site. Inspection of Decorative items such as Gold Plated items and Stainless steel Handrails. Responsible for calibrating devices which could be internally calibrated and holding calibration
plan for which are externally calibrated. Responsible for holding ISO 9001 documents and preparing internal audit.
January / 2013 – December / 2014 Job Title: Quality Control Shift Engineer Department: Quality Department Employer: Alexandria Automotive Casting Co. – Alexandria Egypt Automotive and parts manufacturing industry Job Responsibilities:
Responsible for doing in process control activities to assure that manufacturing process is done according to quality specifications and control plans.
Apply variable metal tests such as Microstructure check, Hardness and Tension test, porosity check by X-rays and Die penetration test, analysing material composition by Spectrometer, checking material grade using Ultrasound test…etc.
Monitoring cast full dimensions by CMM machine. Perform receiving inspections for metal and sand raw materials. Follow up customer complaints and take the necessary corrective actions. Take charge of product audit activities and product sorting actions including inspecting
products for casting defects as requested by customer. Develop statistics by calculating the percentage of defected products record inspection data. Develop a quality control plan based on ISO 9001 and ISO/TS 16949
Khaled Mahmoud Shehata E-mail: [email protected] Mobile: KSA +966540416199 / +966580622971 Egypt +201014281475
Objective Seeking a challenging engineering position in a leading organization where all my knowledge and skills are best utilized and developed.
Page 2 of 2 References available upon request
Personal Details
Name: Khaled Mohamed Mahmoud Mohamed Shehata Location: Jeddah, KSA Date of birth: 08/01/1990 Marital status: Single Nationality: Egyptian
Training and Certificates
Currently Certified Welding Inspector preparation course and practical training September / 2015 Practical Training on XRF Spectrometer Application February / 2015 ISO 9001:2008 Internal Audit training course December / 2014 Lean Six Sigma Black Belt 120 hours training course September / 2011 Management of Mini-projects course certified from Shell education center
October / 2012 – January / 2013 Job Title: Mechanical Design Engineer Department: Lean Manufacturing Engineering Department Employer: Alexandria Automotive Casting Company Job Responsibilities:
Responsible for performing technical studies for new projects and preparing project status reports, cost benefit analysis and recommended actions.
Develops manufacturing processes by designing and modifying equipment for fabricating, building, assembling and installing components.
Responsible for creating 3D CAD models of parts and assemblies then creating dimensional drawings and complete bill of materials.
Prepare design calculations and CAD drawings for steel structure projects.
Personal Skills Languages
Arabic: Mother tongue English: Excellent French: Fair German: Fair
Computer skills Proficient in Computer Aided Design applications (Solid Works and AutoCAD) Familiar with Finite element analysis software (Cosmos and Mat Lab) Microsoft Office
Sports and hobbies Judo: 3rd place in Alexandria championship and 1st place in championship for schools Basketball: Worked as a mini-basket referee Fishing
Education 2008 - 2012 Graduated from: Faculty of Engineering – Alexandria University Degree: B.Sc. in Engineering – Mechanical Department Grade: Good (70%) Graduation project: Energy recovery for cars through small scale wind turbine Graduation project grade: Excellent 1995 - 2007 Graduated from: Sidigaber language school Degree: High School Certificate Grade: Excellent (97.6%)