Masonry Solutions (UK) ltd Seaton House Wilnecote Lane

Belgrave Tamworth Staffs B77 2LE

t: 01827 250236 f: 01827 280765 e: enquiries@masonrysolutions.co.uk

Key benefits of our Prefabricated Chimneys

Flexibility of design sizes

Brick slips cut from bricks of building

Lightweight

One piece, easy to fit

Cost effective

Off site fabrication

Full take off and scheduling service

Can be used with a class 1 or 2

working flue

Chimney Types

Mid Ridge

Gable End

Mono Pitch

Flat Roof

Pitched to flat roof

Our Real Brick Slip Chimneys

provide a time saving & cost effec-

tive solution of adding a chimney to

a new or existing property.

The chimneys are lightweight, sim-

ple to install and use 25mm slips

cut from the facing brick of the

building, ensuring an exact match

to the main brickwork.

The Chimney is manufactured with

a GRP base providing a water tight

structure, this is then clad in 25mm

Brick Slips using a polyurethene

adhesive.

A flashing channel is included for

quick & easy lead flashing and

complete weather-proofing.

Installed as an aesthetic detail

o r w o r k i n g m o d e l o u r

chimneys will provide the solution

and can be produced with a Pre-

Installed Class 1 or Class 2 Flue for

connecting to a secondary heating

system.

The three most common chimney

types are illustrated on this page,

we also provide flat roof and

pitched to flat roof types as

standard.

We have a comprehensive range of

standard chimney types and sizes

available, however due to our

unique manufacturing process we

can produce ‘bespoke’ Chimneys

quickly and economically. Please

refer to our Sales Office for details.

The Chimneys have been fully inde-

pendently tested by ‘CERAM’ the

UKs leading construction materials

test house and a full test report is

available upon request.

“The benefits of real brick

slip chimneys include the

complete flexibility of

design, easy installation

and the option of using a

class 1 or 2 working flue.”

Standard Brick Slip Chimney Range

Lichfield - 665mm x 440mm x 965-1190mm high

Norbury - 777mm x 552mm x 965-1190mm high

Henley - 777mm x 777mm x 965-1190mm high

Oxford - 890mm x 665mm x 965-1190mm high

Sutton - 1002mm x 777mm x 965-1190mm high

All of the above are available as standard in either mid ridge, gable end

or mono pitch.

External finish,Capping and Pot Options;

Capping - Chimneys can be offered with a GRP Sandstone Effect Capping in a variety of colours or left

blank for on-site Mortar Flaunching.

Pots - We offer a standard 300mm Roll Top Pot (blanked off) in either GRP Terracotta Effect or Real terra-

cotta. We also offer the full range of Redbank Terracotta Pots.

External Finish - Brick or Stone Slip, GRP Render Effect or Block Clad for on-site rendering.

Chimney Check List

Chimney type

Size (W x D x H)

Roof pitch

Brick type/finish

Capping details

No of Pots & Type

Brick Corbel details

Technical CAD

Drawing for

approval & fix-

ing Instrutions

supplied with

every Chimney

order.