KESO KEK genie BS - assaabloyopeningsolutions.ch Schweiz...KESO MOZY eco 21.40T. Sleeve material:...

ASSA ABLOY is the global leader in door opening solutions.

KESO KEK genie BS Documentation for EG.707 and EG.708

1 Important Notes ....................................................................3 2 Introduction ............................................................................4 3 Product description..............................................................4 4 Applications.............................................................................5 5 Application Site......................................................................5 6 KESO KEK genie BS Cylinder Technical Data.................6 7 KESO KEK genie BS Cylinder Types...................................7 8 Definitions of KESO KEK Electronics ................................9 9 Individual Parts and Accessories for EG.707.............. 24 10 Accessories for EG.086 – EG.088.................................... 30 11 Accessories for EG.708...................................................... 31 12 General accessories............................................................ 37 13 Long Escutcheons without Electronics........................ 38 14 Security escutcheons ........................................................ 41 15 Escutcheons.......................................................................... 43 16 Technical data...................................................................... 44 17 End of battery life detection............................................ 53 18 Battery change..................................................................... 54 19 Pin-out for EG.708 .............................................................. 55 20 Connection example ......................................................... 59 21 Installation ............................................................................ 60 22 KESO KEK Checklist............................................................. 63 23 KESO KEK Planning Aids.................................................... 64 24 Maintenance / Care / Repairs .......................................... 66 25 ESD Rules ............................................................................... 66 26 Product services .................................................................. 66 27 Notes....................................................................................... 67

Date of publication: 25.03.2009Version: 003

ASSA ABLOY,the global leader in door opening solutions

KESO KEK genie BS

KESO AG, 03/2009 Subject to change of 68 Pages

1 Important Notes

KESO AG accepts no liability in case of data loss! The configuration described in the following must be implemented by an approved Key Solution Center.

KESO AG accepts no claims under warranty and no liability in cases where unauthorised modifi-cations, or improper installation contrary to our assembly instructions is performed or brought about.

1.1 Conditions for use This documentation was written for users with good working knowledge of Windows®. The explanations in this manual also assume that you are familiar with using Windows®.

Important note: KESO partners must have completed training for the products in question.

1.2 Important notes on this documentation This documentation is part of the KESO KEK genie BS product. It contains important information on its set-up operations and handling. For this reason, you should familiarise yourself with the content and, in particular, observe the notes on safe installation, handling and operations. Make sure that this is complied with when passing on this product to third parties. For this reason, you should keep this documentation in a safe place for future reference! This documentation is based on information that was correct at time of printing. KESO AG ac-cepts no liability for the correctness and completeness of the content of this documentation. The figures or graphics shown may differ from the supplied components.

We reserve the right to make changes to reflect technical advancements. The manual is not covered by our "Update Service".

1.3 Waste disposal Articles listed in this documentation must not be disposed of as normal household waste. It is the consumer’s responsibility to dispose of the product at a collection point for recycling of electrical and electronic waste. Separate disposal of this waste helps to optimise the recycling of all materials suitable for the recycling process,

and to reduce health and environmental risks. For more information on the correct disposal of this product, please contact your dealer.

1.4 Safety marks

= Instructions concerning the safety of the user and that serve to avoid damage to the device.

= Instruction to disconnect the device from the power supply!

= Instructions that you must follow to ensure trouble-free operations!

= Instructions, avoid undue force during assembly.

KESO KEK genie BS


2 Introduction

The requirement for security, control and high levels of flexibility has increased considerably. This applies in particular to doors with many or frequently changing users such as: exterior ac-cess doors, archives, server rooms etc… An extension of the mechatronic systems is necessary to fulfil these requirements.

3 Product description Just like with any other achievements, the wheel of time keeps on turning, producing new in-ventions and new features. New scientific and technological findings are increasingly linked to produce synergies, or to compensate for vulnerabilities, and closing and locking technologies are no exceptions to the rule of change. Purely mechanical closing and locking systems are too inflexible and expensive for today’s applications for the most part. The biggest benefit to locking technology that we gain by combining mechanical and electronic systems, is more flexible locking organization. Flexibility is expressed in the speed with which required changes can be performed, such as blocking a lost key, or authorizing a new key, etc. This reduces the risk caused by a lost key to a minimum. The subsequent costs are extremely low, as you only need to replace one key, rather than the cylinder, or even the whole system. The KEK genie BS product is your ticket to the world of KESO mechatronic locking systems – a perfect combination of mechanics and electronics.

3.1 KESO KEK genie BS Function

3.1.1 KESO KEK genie BS Electronic Function Two characteristics are critical to identifying access authorizations. One the one hand, the me-chanical key has to align the pins correctly, and on the other, the storage medium embedded in the key is read and compared with the electronics. If both characteristics match, the cylinder can be actuated and the door opened. When the key is inserted into the cylinder, and the wake-up contact in the electronics is acti-vated, the first step is to check the battery power. Then the electronics read the storage me-dium embedded in the key, and compare the data content of the key with that of the electron-ics. In case of a match, the electronics release the cylinder. As a second check, the mechanical side must also match. Only if both test characteristics are perfect, can the key be turned and the door opened. Following this, the action is stored on the EEProm where it can be read as an event at a later time. (event logging only available with PC versions) Communications between the key with the embedded storage medium and the KESO KEK ge-nie BS cylinder are contactless. The mechanics on the key can be used for other cylinders in the same system.

3.1.2 Description KESO KEK genie BS locking cylinder The KESO KEK genie BS cylinder is based on a traditional, mechanical cylinder with 15 drivers on each locking side. In addition to mechanical locking, the mechatronic side of the KESO KEK ge-nie BS cylinder includes an actuator comprising an antenna, a wake-up mechanisum and a mo-tor that either blocks or releases the rotor. The mechatronic side of the KESO KEK genie BS cyl-inder is identifiable by the blue antenna cover. A blue connecting cable (L = approx. 230 mm) with a 6-pin connector extends from the KESO KEK genie BS cylinder. This cable is attached to the electronics.

KESO KEK genie BS


3.1.3 Description of Mechanics The KESO KEK genie BS system is based on mechanical locking with pins and drivers in the cylin-der. On top of mechanical locking, there is also electronic locking which adds more flexibility to mechanical locking. This symbiosis of mechanical and electronic locking only comes into its own when you consider the locking options that electronics give you. Mechanical locking pro-vides the locking technology underpinnings.

3.1.4 Description of Electromechanics The electronics module has its own internal power supply. The electronics are activated by a key sensor when a key is inserted. The electronics start to transmit radio waves via the antenna to the KESO KEK key. If the key is identified, the electro-motor is switched on to turn the cam through 90°. This positions the cams horizontally to the stop thus allowing for mechanical unlo-cking and rotation.

4 Applications You can fit KESO KEK genie BS cylinders to one or more doors; depending on the application and the number of keys, you can choose either the PC or Home version.

4.1 Home System Applications The KESO KEK genie BS Home System is deployed as a stand-alone system for e.g. detached houses or apartment blocks. Smaller companies often use the system when letting hobby facili-ties or storage rooms. It is used wherever the owner can easily manage key assignments.

4.2 PC System Applications The KESO KEK genie BS PC System is also deployed in e.g. detached houses or apartment blocks, but mainly used by companies where the customer expects a higher level of flexibility. The KESO K4 software guarantees this flexibility. The KESO KEK Programmer PPG V1, KESO KEK Program-mer PPG V2, KESO KEK Programmer USB, or the mutation key, all support targeted program-ming. KESO KEK genie BS cylinders let you manage up to 8,000 keys and 500 events.

4.3 PC Time System Applications The KESO KEK genie BS PC Time System is used by larger companies and for more complex building systems where time plays an important role, such as in public institutions like universi-ties, airports, or hospitals. KESO KEK genie BS PC cylinders let you manage up to 8,000 keys, 500 events and 16 time groups.

5 Application Site For humid or refrigerated areas, direct exposure to weather conditions, near salt water, or for applications in aggressive, corrosive environments, electronic subassemblies must be engi-neered according to particular specifications. This also applies to electronic subassemblies for use in dusty environments. If needed, take measures to protect the electronic subassembly against the elements and dust. For use in environments with a particularly high level of electro-magnetic interference, custom specifications must be defined for the electronic subassembly. Customer's specifications must be discussed with us prior to order.

KESO KEK genie BS


6 KESO KEK genie BS Cylinder Technical Data

Art. No.: Depending on type and use in KESO System Dimensions: Basic length 60 mm or 40 mm Operating temperature: - 10°C - + 50° C Storage temperature: - 20°C - + 70° C Humidity: 10 to 95% (non-condensing) Protection type: IP 54 Cable length: approx. 230 mm VdS Class: Class B

Pos. Description 1 Cylinder half KESO KEK genie BS 2 Cylinder half mechanical 3 Cam DZ 4 Web 5 Tensioning pin 6 Tensioning pin 7 Actuator KESO KEK genie BS 8 Cable with connector 9 KESO KEK genie BS antenna port 10 Mechanical tumblers

1

2

3

4

5

6

7 8

9

10

KESO KEK genie BS


7 KESO KEK genie BS Cylinder Types

7.1 EU – Profile cylinder (web profile ø17 mm) Excerpt citing the most commonly used KESO KEK genie BS cylinders (non-exhaustive list)

Description Graphic illustration Half cylinders 21.481.

Sleeve material: Sidra Web material: CrNi Basic length: 40 mm Extensible: in 5 mm steps

Double cylinder 21.483.


Cylinder with thumb turn 21.485.


Cylinder with thumb turn for KESO MOZY eco 21.40T.


Dual cylinder with electronics both sides 21.40U.


Dual cylinder with Freewheeling cams 21.41C.


Dual cylinder with Priority function 21.41B


* Dual cylinder with contact pin on elec. side 21.41M.


Dual cylinder with dummy interior side 21.40V


* The use of contact pin cylinders is restricted with existing master key systems. Depending on locking system permutations, it may be impossible to use a contact pin cylinder.

KESO KEK genie BS


7.2 EuroSwiss – Profile cylinder (web profile ø22 mm) Excerpt citing the most commonly used KESO KEK genie BS cylinders (non-exhaustive list)

Description Graphic illustration Half cylinders 11.581. 21.581. 31.581.


Double cylinder 11.583. 21.583. 31.583.


Cylinder with thumb turn 11.585. 21.585. 31.585.


Dual cylinder with electronics both sides 11.50U. 21.50U. 31.50U.


Cylinder with thumb turn for KESO MOZY eco 11.50T. 21.50T. 31.50T.


Dual cylinder with Freewheeling cams 11.51C. 21.51C. 31.51C.


* Dual cylinder with contact pin on elec. side 11.50Y. 21.50Y. 31.50Y.


* Dual cylinder with Contact pin on mech. side 11.51M. 21.51M. 31.51M.


Dual cylinder with dummy interior side 11.50V 21.50V 31.50V


* The use of contact pin cylinders is restricted with existing master key systems. Depending on locking system permutations, it may be impossible to use a contact pin cylinder.

KESO KEK genie BS


8 Definitions of KESO KEK Electronics

8.1 Dimensional Sketch Electronics Module EG.707 Dimensions: 118 x 38 x 14.6 mm Material: Plastic PA 6, antistatic Colour: black

KESO KEK genie BS


8.2 Electronics in Face Plate – Battery Version EG.707 Extending the KESO KEK genie BS range to include a new face plate variant for hidden installa-tion.

The communications connector in the face plate is protected by a corresponding cover.

The face plate housing comprises antistatic plastic mounted using the two M4 screws and the stretching thread inserts.

8.2.1 Dimensional Sketch EG 707

KESO KEK genie BS


8.2.2 Definition Article Numbers EG.707 EG.707 _ _ _ _ _ _ _ _ 02

El

ectr

onic

s

Face

pla

te ty

pe

Cabl

e le

ngth

Read

er a

pert

ure

Types Home, Mains OHB

PC, Mains OPB

PC, Time, Mains PTB

Electronics only 00

Face plate short (150mm) 01

Face plate long (210mm) 02

Without 00

Cable length 200 mm 10


Cable length 1,200 mm 02


Reader aperture 02

KESO KEK genie BS


8.3 Electronics in Fitting – Battery Version EG.707 KESO KEK genie BS is now even more attractive thanks to the availability of electronics in the fit-ting.

Visible installation on the inside of the door above the KESO KEK genie BS cylinder offers many advantages, such as e.g. direct mounting of security escutcheons with the new fitting type.

Fitting covers are available in various versions, Euro profile, EuroSwiss profile and dummy. The cover is secured by means of a screw.

The communications connector in the face plate is protected by a corresponding cover.

8.3.1 Dimensional Sketch EG 707

KESO KEK genie BS


8.3.2 Definition Article Numbers EG.707 EG.707 _ _ _ _ _ _ _ _ 02 _ _ _ _

Elec

tron

ics

Fitt

ing

type

Cabl

e le

ngth

Read

er a

pert

ure

Cylin

der c

ut-o

ut fi

ttin

g

Colo

r fitt

ing

Types Home, Mains OHB

PC, Mains OPB

PC, Time, Mains PTB

Without fitting cover 00

Narrow fitting 03

Wide fitting 04

Without 00





Reader aperture 02

Dummy 00

EU Profile (17 mm) 01

CH Profile (22 mm) 04

Nickel plated 02

Chrome plated matt (01) 03

Gold décor 04

Graphite black 92

KESO KEK genie BS


8.4 Stainless Steel Long-Escutcheon Type Security Fitting EG.086 The stainless steel security escutcheon with integrated KESO KEK electronics is a tried-and-trusted security product characterized by a successful combination of excellent security and timeless, elegant design.

The external fascia can be fitted with a handle or a fixed thumb turn. The zinc die cast base plate and hardened drill-open protection plate are invisibly screw-connected to the stainless steel cover. The internal fascia comprises a galvanized steel base plate with screwed through connection, 2 x M8, and the stainless steel cover clipped on. The stainless steel security cover G.086 is designed to house the optional electronics. The electronics are safely located under the internal fascia. Power is provided by a battery pack, which is also located below the internal fascia. The clip-on internal fascia allows for easy replacement of the battery pack.

DIN 18257 – ES 1 – L – ZA approved

8.4.1 Dimensional Sketch EG.086 Handle 5062 Handle 5064 Thumb turn 5827/53 Thumb turn 5830 (ø 53 mm) (ø 60 mm eccentric) right-hand mounted (convertible to left-handed)

KESO KEK genie BS


8.4.2 Definition Article Numbers EG.086

EG.086 _ _ _ _ _ _ _ _ _ _ _ _ 2

Ex

tern

al h

andl

e In

tern

al h

andl

e

Cylin

der c

ut-o

ut

Surfa

ce C

hrom

e N

icke

l St

eel /

Col

or

Hol

e sp

acin

g di

stan

ce

door

leaf

thic

knes

s

4 kt

.

Elec

tron

ics

Moi

stur

e pr

otec

tion

Types Handle 5062 _ 1 _

Handle 5064 _ 2 _

Thumb turn 5827/53 3 _

Thumb turn 5830 4 _

EU Profile ø 17 mm 1

EuroSwiss ø 22 mm 4

matt brushed 1

polished 2

70 mm* (1) 70*

72 mm (1) 72

74 mm (4) 74

78 mm (1) & (4) 78

85 mm (1) 85

88 mm (1) 88

90 mm (4) 90

92 mm (1) 92

94 mm (4) 94

38 – 48 mm 1

48 – 58 mm 2

58 – 68 mm 3

68 – 78 mm 4

78 – 88 mm 5

7 mm 70

8 mm 80

8.5 mm 85

9 mm 90

Without electronics 000

PC Battery 0PB

PC Time Battery PTB

Home Battery 0HB

with moisture protection 2 Notes on cylinder definitions - The cylinder projection relative to the external fascia must be no more than 3 mm. / All han-

dles are rotatable, fixed mounting. * on request

KESO KEK genie BS


8.5 Stainless Steel Long-Escutcheon Type EG.087 The stainless steel security escutcheon with integrated KESO KEK electronics is a tried-and-trusted security product characterized by a successful combination of excellent security and timeless, elegant design.

The solid external fascia can be fitted with a handle or a fixed thumb turn. The cylinder is protected by a solid stainless steel cylinder guard and a hardened bronze protection plate. The internal fascia comprises a galvanized steel base plate with screwed through connection, 2 x M8 and 1 x M6, and the stainless steel cover clipped on. The stainless steel security cover G.087 is designed to house the optional electronics. The electronics, with which the KESO KEK genie BS cylinder can communicate via a plugged connection, are located safely under the internal fascia. Power is provided by a battery pack, which is also located below the internal fascia. The clip-on internal fascia allows for easy re-placement of the battery pack.


8.5.1 Dimensional sketch Handle 5062 Handle 5064 Thumb turn 5827/53 Thumb turn 5830 (ø 53 mm) (ø 60 mm eccentric) right-hand mounted (convertible to left-handed)

KESO KEK genie BS



EG.087 _ _ _ _ _ _ _ _ _ _ _ _ 2

Ex

tern

al h

andl

e In

tern

al h

andl

e

Cylin

der c

ut-o

ut

Surfa

ce C

hrom

e N

icke

l St

eel /

Col

or

Hol

e sp

acin

g di

stan

ce

door

leaf

thic

knes

s

4 kt

.

Elec

tron

ics

Moi

stur

e pr

otec

tion


Handle 5064 _ 2 _


Thumb turn 5830 4 _



matt brushed 1

polished 2

70 mm* (1) 70*

72 mm (1) 72

74 mm (4) 74

78 mm (1) & (4) 78

85 mm (1) 85

88 mm (1) 88

90 mm (4) 90

92 mm (1) 92

94 mm (4) 94

38 – 48 mm 1

48 – 58 mm 2

58 – 68 mm 3

68 – 78 mm 4

78 – 88 mm 5

7 mm 70

8 mm 80

8.5 mm 85

9 mm 90


PC Battery 0PB

PC Time Battery PTB

Home Battery 0HB

with moisture protection 2 Notes on cylinder definitions - The cylinder projection on the outer side, measured from the door leaf, must be between 7

and 12 mm. / All handles are rotatable, fixed mounting. * on request

KESO KEK genie BS


8.6 Stainless Steel Long-Escutcheon Type EG.088 The stainless steel security escutcheon with integrated KESO KEK electronics is a tried-and-trusted security product characterized by a successful combination of excellent security and timeless, elegant design.

The solid external fascia can be fitting with a handle or a fixed thumb turn. The cylinder is protected by a solid stainless steel cylinder guard and a hardened drill protection plate. A hardened drill protection plate that covers the whole external fascia area is worked into the underside of the exterior fascia. The internal fascia comprises a galvanized steel base plate with screwed through connection, 2 x M8 and 1 x M6, and the stainless steel cover clipped on. The stainless steel security cover G0.088 is designed to house the optional electronics. The electronics, with which the KESO KEK genie BS cylinder can communicate via a plugged connection, are located safely under the internal fascia. Power is provided by a battery pack, which is also located below the internal fascia. The clip-on internal fascia allows for easy replacement of the battery pack.


8.6.1 Dimensional Sketch EG.088 Griff 5062 Handle 5064 Thumb turn 5827/53 Thumb turn 5830 (ø 53 mm) (ø 60 mm eccentric) right-hand mounted (convertible to left-handed)

KESO KEK genie BS



EG.088 _ _ _ _ _ _ _ _ _ _ _ _ 2

Ex

tern

al h

andl

e In

tern

al h

andl

e

Cylin

der c

ut-o

ut

Surfa

ce C

hrom

e N

icke

l St

eel /

Col

or

Hol

e sp

acin

g di

stan

ce

door

leaf

thic

knes

s

4 kt

.

Elec

tron

ics

Moi

stur

e pr

otec

tion


Handle 5064 _ 2 _


Thumb turn 5830 4 _



matt brushed 1

polished 2

70 mm* (1) 70*

72 mm (1) 72

74 mm (4) 74

78 mm (1) & (4) 78

85 mm (1) 85

88 mm (1) 88

90 mm (4) 90

92 mm (1) 92

94 mm (4) 94

38 – 48 mm 1

48 – 58 mm 2

58 – 68 mm 3

68 – 78 mm 4

78 – 88 mm 5

7 mm 70

8 mm 80

8.5 mm 85

9 mm 90


PC Battery 0PB

PC Time Battery PTB

Home Battery 0HB

with moisture protection 2 Notes on cylinder definitions - The cylinder projection on the outer side, measured from the door leaf, must be between 7

and 12 mm. / All handles are rotatable, fixed mounting. * on request

KESO KEK genie BS


8.7 Long Escutcheon Fitting EG.089 The security long escutcheon with integrated KESO KEK electronics is a tried-and-trusted secu-rity product, characterized by a timeless, elegant design.

The external fascia can be fitting with a handle or a fixed thumb turn.

The internal fascia comprises a nickel plated zinc die cast shell which is connected to the internal fascia by means of three M6 screws.

The electronics, with which the KESO KEK genie BS cylinder can communicate via a plugged connection, are located safely under the internal fascia.

Power is provided by a battery pack, which is also located below the internal fascia.

8.7.1 Dimensional Sketch EG.089 Handle Thumb turn (ø 45 mm)

KESO KEK genie BS



EG.089 _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2

Ex

tern

al h

andl

e In

tern

al h

andl

e

Cylin

der c

ut-o

ut

Surfa

ce C

hrom

e N

icke

l St

eel /

Col

or

Hol

e sp

acin

g di

stan

ce

door

leaf

thic

knes

s

4 kt

.

Dep

loym

ent h

eigh

t

Elec

tron

ics

Moi

stur

e pr

otec

tion

Types Handle 1 _

Thumb turn 3 _


EuroSwiss ø 22 mm 4 matt brushed, nickel plated 1

Polished, chrome plated 2

70 mm* (1) 70*

72 mm (1) 72

74 mm* (1) & (4) 74*

78 mm (1) & (4) 78

35 – 40 mm 1

40 – 45 mm 2

45 – 50 mm 3

50 – 55 mm 4

55 – 60 mm 5

60 – 65 mm 6

65 – 70 mm 7

70 – 75 mm 8

75 – 80 mm 9

8 mm 80

9 mm 90

8 mm* 08*

10 mm 10

12 mm 12

14 mm 14


PC Battery 0PB

PC Time Battery PTB

Home Battery 0HB

with moisture protection 2 Notes on cylinder definitions * Only for long escutcheons without inserts.

KESO KEK genie BS


8.8 Electronics – Mains VersionEG.708 KESO KEK genie BS is now even more attractive thanks to the availability of electronics for 12-24V.

The face plate housing comprises antistatic plastic mounted using the two M4 screws and the stretching thread inserts. The electronics can be installed in the face plate, surface mounted, via a top-hat rail, or using the practical terminal box. One of many advantages is that the mains version can use 12V or 24 volts and can control a variety of devices thanks to the integrated re-lay. The mains version can also be networked with KESO KEK net.

8.8.1 Dimensional Sketch for Electronics EG.708 Dimensions: 118 x 38 x 14.6 mm Fixing lugs: 5 pcs. With rated break point

203814

.6

1.7

20

KESO KEK genie BS



EG.708 _ _ _ _ _ 02 01 _ _

El

ectr

onic

s

Type

Read

er a

pert

ure

Appl

icat

ion

Exte

nsio

n ca

ble

Types PC, Mains OPS

PC, Time, Mains PTS

Without face plate 00

Face plate short (150mm) 01

Face plate long (210mm) 02

DIN rack-mount case 05

Surface mounted case G.546 06

For terminal box 07

Reader aperture 02

For use with cylinder 01

Without extension cable 00

0.2 m extension cable 10






KESO KEK genie BS


9 Individual Parts and Accessories for EG.707

9.1 Fitting 40 mm dummy Article No.: G.705/../../.. Dimensions: 127 x 41.4 x 18.5 mm Material: Plastic antistatic PA 6 Color: nickel plated, gold decor, black Mounting: 1x grub screw M3x10 mm

9.2 Fitting EU Profile (40 mm) Article No.: G.705/../../.. Dimensions: 127 x 41.4 x 18.5 mm Material: Plastic antistatic PA 6 Color: Nickel plated, chrome plate matt,

gold decor, black Mounting: 1x grub screw M3x10 mm

9.3 Fitting EuroSwiss Profile 40 mm Article No.: G.705/../../.. Dimensions: 127 x 41.4 x 18.5 mm Material: Plastic antistatic PA 6 Color: nickel plated, gold decor, black Mounting: 1x grub screw M3x10 mm

KESO KEK genie BS


9.4 Fitting 55 mm dummy Article No.: G0.706/../../.. Dimensions: 127 x 55 x 18.5 mm Material: Plastic antistatic PA 6 Color: nickel plated, gold decor, black Mounting: 1x grub screw M3x10 mm

9.5 Fitting EU Profile (55 mm) Article No.: G0.706/../../.. Dimensions: 127 x 55 x 18.5 mm Material: Plastic antistatic PA 6 Color: Nickel plated, chrome plate matt,

gold decor, black Mounting: 1x grub screw M3x10 mm

9.6 Fitting EuroSwiss Profile 55 mm Article No.: G0.706/../../.. Dimensions: 127 x 55 x 18.5 mm Material: Plastic antistatic PA 6 Color: nickel plated, gold decor, black Mounting: 1x grub screw M3x10 mm

KESO KEK genie BS


9.7 Short Face Plate for Electronics EG.707 & EG.708 Article No.: G.704/150/02 Material: Plastic antistatic PA 6 Color: black Mounting: 2 cylinder screws Torx M4x12 mm 2 stretching thread inserts M4x10 For wood and soft plastics Drill hole: Drill hole depth min. 15 mm, Ø 5.5 mm For threaded inserts

9.7.1 Dimensional Sketch Short Face Plate Dimensions: 170 x 20 x 41 mm

9.8 Long Face Plate for EG.707 & EG.708 Article No.: G.704/210/02 Material: Plastic antistatic PA 6 Color: black Mounting: 2 cylinder screws Torx M4x12 mm 2 stretching thread inserts M4x10 For wood and soft plastics Drill hole: Drill hole depth min. 15 mm, Ø 5.5 mm For threaded inserts

9.8.1 Dimensional Sketch Long Face Plate Dimensions: 230 x 20 x 41 mm

4141

4141

KESO KEK genie BS


9.9 Damp Casing IP54 Damp casing for EG.707 electronics when fitting the damp casing, note that it is always located above the cylinder. Article No.: V.001/41/38 Material: Anodized aluminum Size: 150x46x19 mm

9.10 Exterior Case - Metal Used with KESO face plate housing and for all third-party products with same dimensions. The cover on the external housing is made of CNS, polished, and has a material thickness of 1.5 mm. The base plate is made of aluminum and 3 mm thick. The screw connections at the front use torx grub screws. (Type TX 20) Article No.: G0.546 Cover material: CNS polished Material thickness: 1.5 mm Cover connection type: 2 pcs. Torx TX20

9.10.1 Dimensional Sketch External Housing Dimensions: 262.97 x 54 x 25.5 mm

KESO KEK genie BS


9.11 Small Metal Housing Article No.: G0.412 Cover material: CNS polished Material thickness: 2 mm Cover connection type: 2 pcs. Torx TX20 Size: 143 x 45 x 27 mm (LxWxH)

9.11.1 Dimensional Sketch External Housing

9.12 EuroSwiss Profile Base Plate 40 mm Article No.: G.141/40/01 G.141/40/02 with adhesive foil Area of application: for fire-prevention doors Dimensions: 127 x 41.4 x 5 mm Material: 1.4305 (X12CrNiS 18 8)

9.13 EuroSwiss Profile Base Plate 55 mm Article No.: G.141/55/01 G.141/55/02 with adhesive foil Area of application: for fire-prevention doors Dimensions: 127 x 55 x 5 mm Material: 1.4305 (X12CrNiS 18 8)

KESO KEK genie BS


9.14 Adhesive Foil for Base Plate 40/55 mm Article No.: V.001/54/24 Quantity: 2 pieces Type: double-sided adhesive cloth tape Dimensions: 38 x 27.5 x 1 mm Material: Scotch 3M IMPORTANT: Subsurface must be dust and grease-free

9.15 Battery Article No.: V.000/21/16 Packing unit: 10 pcs. Type: Alkali manganese cells LR1 Voltage: 1.5 volts

9.16 Cover Plug for Fitting 55 mm Article No.: G0.701 Material: Santoprene Color: black

9.17 Cover Plug for Face Plate Cover and Fitting 40 mm Article No.: G0.700 Material: Santoprene Color: black

9.18 Adapter Sleeve Eccentric Article No.: G0.702 Material: Antistatic plastic PA6 Color: black Note: reduction of cylinder aperture from EuroSwiss profile to EU profile

Adhesive tape

KESO KEK genie BS


9.19 Grub Screw for Fitting 40 mm / 55 mm Article No.: V.000/33/37 Packing unit: 50 pcs. Size: M3x10 mm

9.20 Upper Housing Part for EG.707 Article No.: 175.093.0001

9.21 Lower Housing Part for EG.707 Article No.: 175.092.0001

10 Accessories for EG.086 – EG.088

10.1 Installation Template for Fittings Art. No.: V.000/13/54 Dimensions: 239 x 75 x 39 mm (L x W x H) Description: Steel installation template with hardened drill inserts

10.2 Energy Pack (Batteries) Art. No.: G0.405 Dimensions: 46 x 32 x 11 mm (L x W x H) Type: AAA, alkali manganese cells Voltage: 4.5 Volt ( 3 X 1.5 Volt) Capacity: Minimum 1200 mAh Cable length: 60 mm with reverse polarity protected plug Service life: approx. 2 years Operating temperature: - 10°C to + 50°C

10.3 Battery blister for energy pack G.405 Art. No.: V.000/39/77

10.4 Electronics PCB for Battery Operations Home Version Article No.: EK.015.0006 PC Version Article No.: EK.015.0007 PC Time Version Article No.: EK.015.0008

KESO KEK genie BS


10.5 PCB Holder for EK.015.000x Article No.: V.001/54/26 Dimensions: 31 x 26 x 3 mm

11 Accessories for EG.708

11.1 Adapter PCB for EG.708 Article No.: K.023 Dimensions: 31 x 26 x 14 mm Application area: Electronics Layout V1.4; V1.5 Material PCB holder: Polyamide 66 Cable for peripherals: 1 pcs. 10-pin Cable for RS-485: 1 pcs. 7-pin Cable length: 120 mm Note: The adapter PCB is clipped onto a PCB holder using double-sided adhesive tape

11.2 Short Face Plate for Electronics EG.707 & EG.708 Article No.: G.704/150/02 Material: Plastic antistatic PA 6 Color: black Mounting: 2 cylinder screws Torx M4x12 mm 2 stretching thread inserts M4x10 For wood and soft plastics Drill hole: Drill hole depth min. 15 mm, Ø 5.5 mm For threaded inserts

11.2.1 Dimensional Sketch Short Face Plate Dimensions: 170 x 20 x 41 mm

4141

KESO KEK genie BS


11.3 Long Face Plate for EG.707 & EG.708 Article No.: G.704/210/02 Material: Plastic antistatic PA 6 Color: black Mounting: 2 cylinder screws Torx M4x12 mm 2 stretching thread inserts M4x10 For wood and soft plastics Drill hole: Drill hole depth min. 15 mm, Ø 5.5 mm For threaded inserts

11.3.1 Dimensional Sketch Long Face Plate Dimensions: 230 x 20 x 41 mm

11.4 Cover Plug for Face Plate Cover and Fitting 40 mm Article No.: G0.700 Material: Santoprene Color: black

4141

KESO KEK genie BS


11.5 Exterior Case - Metal Used with KESO face plate housing and for all third-party products with same dimensions. The cover on the external housing is made of CNS, polished, and has a material thickness of 1.5 mm. The base plate is made of aluminum and 3 mm thick. The screw connections at the front use torx grub screws. (Type TX 20) Article No.: G0.546 Cover material: CNS polished Material thickness: 1.5 mm Cover connection type: 2 pcs. Torx TX20

11.5.1 Dimensional Sketch External Housing Dimensions: 262.97 x 54 x 25.5 mm

11.6 Small Metal Housing Article No.: G0.412 Cover material: CNS polished Material thickness: 2 mm Cover connection type: 2 pcs. Torx TX20 Size: 143 x 45 x 27 mm (LxWxH)

11.6.1 Dimensional Sketch External Housing

KESO KEK genie BS


11.7 DIN Rail Holder for Electronics EG.708 Article No.: G0.411 Material: Polyamide 66 Color: turquoise Mounting: Suitable for DIN 15; DIN 32 and DIN 35 mounting rails

11.7.1 Dimensional Sketch DIN Rail Holder Dimensions: 137 x 45 x 28 mm (L x W x H)

11.8 Replacement Base Plate for EG.708 Plastic Housing Article No.: 175.093.0002 Material: Polyamide 66 Color: black

KESO KEK genie BS


11.9 KESO KEK Terminal Box

17.015 _ _ _ _ _ _ _ _ _ _ _

-{}-

Conn

ectio

n bo

x w

ith

basi

c m

ater

ials

Rela

y

Pow

er su

pply

Prep

ared

for

KESO

ele

ctro

nics

Prep

ared

for

KESO

KEK

net

Acc

ess

Driv

e co

ntro

l uni

t

Types Plastic 325x275x120 Land-scape format 01

Plastic 325x275x120 Portrait format 02

Plastic portrait format 275x225x80 *1 03

Steel sheet 300x300x150 *1 04

Steel sheet with cylinder perforation 300x300x150 *1 05

12 V relay 01

24 V relay 02

Without power supply 00

Power supply 12V/4.0A/48W 01



Not prepared for KESO electronics 00

Prepared for KESO electronics 01

Not prepared for KESO KEK net Access 00

Prepared for KESO KEK net Access 01

Without drie control unit EA420 00

Drive control unit EA420 01

*1 only available without drive control unit *2 Prepared for locking cylinder 13.031… / 23.031… / 31.031… with flat bolt A3 (E.275 A3)

KESO KEK genie BS


11.10 KESO KEK Emergency Power Supply The KESO KEK emergency power supply is connected to the mains power supply. If the mains power drops off, the internal relay is switched and the power supply is ensured for approx. 24 hours * via the battery.

* Important note:

This time value is approximate; depending on the power consumption and the use of connected devices, battery power can last longer or be exhausted more quickly!

Emergency power supply box 12 V Article No.: V.001/54/44 Emergency power supply box 24 V Article No.: V.001/54/45

KESO KEK genie BS


12 General accessories

12.1 Extension Cable for KESO KEK genie BS cylinder Article No.: K.500/02 0.2 m Article No.: K.500/06 0.6 m Article No.: K.500/12 1.2 m Article No.: K.500/20 2.0 m Wires: AWG 30 OR 7x102 mm² Partially twisted pair unshielded Diameter: 5 mm Cable end: Connectors crimped on to both ends, reverse-polarity pro-tected

12.2 Connector for Extension Cable Art. #: V.000/54/67 Material: Plastic antistatic PA 6 Color: white

12.3 Key switch flush-mounted Art. no.: V.000/53/68 Description: 2-sided non-locking, EuroSwiss profile without cylinder and electronics Art. no.: V.000/53/69 Description: 1-sided non-locking, EuroSwiss profile without cylinder and electronics Art. no.: V.000/53/70 Description: Locking, EuroSwiss profile without cylinder and electronics

12.4 Key switch surface mounted Art. no.: V.000/53/71 Description: 2-sided non-locking, EuroSwiss profile without cylinder and electronics Art. no.: V.000/53/72 Description: 1-sided non-locking, EuroSwiss profile without cylinder and electronics Art. no.: V.000/53/70 Description: Locking, EuroSwiss profile without cylinder and electronics

KESO KEK genie BS


13 Long Escutcheons without Electronics

13.1 Long escutcheon fitting G.043/.. Long escutcheon for KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm Material stainless steel, matt brushed. Version for wooden and metal doors. Dimensions: Length: 235 mm Width: 40 mm Height: 2 mm Handle guide: 16 mm G0.043 _ _

Dis

tanc

e

Types Distance 74 mm 74

Distance 78 mm 78

21 mm

71 m

m13

7 m

m

40 mm

84,5

mm

78 m

m

235

mm

KESO KEK genie BS


13.2 Long escutcheon fitting long type G.043/../L Long escutcheon fitting long type for KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm Material stainless steel, matt brushed. Version for wooden and metal doors. Dimensions: Length: 258 mm Width: 40 mm Height: 2 mm Handle guide: 16 mm G0.043 _ _ L

Dis

tanc

e

Leng

th


Distance 78 mm 78

Length L

KESO KEK genie BS


13.3 Long escutcheon fitting long type with drill hole G.043/../LB Long escutcheon fitting long type KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm, with addi-tional drill holes (M3) for attaching the EG.707 electronics. Material stainless steel, matt brushed. Version for wooden and metal doors. Dimensions: Length: 258 mm Width: 40 mm Height: 2 mm Handle guide: 16 mm G0.043 _ _ L W

Dis

tanc

e

Leng

th

Dril

l hol

e


Distance 78 mm 78

Length L

Drill hole W

KESO KEK genie BS


14 Security escutcheons

14.1 Security escutcheon round G.025 For KESO KEK genie BS – EuroSwiss cylinder Ø 17 mm Round type for wooden and metal doors.

G0.025 _ _

Material chrome

plated nickel steel H

eigh

t A

Types 2 mm 02

4 mm 04

6 mm 06

8 mm 08

10 mm 10

12 mm 12

14 mm 14

16 mm 16

18 mm 18

20 mm 20

14.2 Security escutcheon oval G.026 For KESO KEK genie BS – EuroSwiss cylinder Ø 17 mm Oval version for wooden and metal doors.

G0.026 _ _

Material chrome


eigh

t A

Types 2 mm 02

4 mm 04

6 mm 06

8 mm 08

10 mm 10

12 mm 12

14 mm 14

16 mm 16

18 mm 18

20 mm 20

KESO KEK genie BS


14.3 Security escutcheon oval G0.039 For KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm Oval version for wooden and metal doors.

G0.039 _ _

Material chrome


eigh

t A

Types 2 mm 02

4 mm 04

6 mm 06

8 mm 08

10 mm 10

12 mm 12

14 mm 14

16 mm 16

14.4 Security escutcheon round G0.040 For KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm Round type for wooden and metal doors.

G0.039 _ _

Material chrome


eigh

t A

Types 2 mm 02

4 mm 04

6 mm 06

8 mm 08

10 mm 10

12 mm 12

14 mm 14

16 mm 16

KESO KEK genie BS


15 Escutcheons

15.1 Flat escutcheon round G.008 For KESO KEK genie BS – Euro profile cylinder Ø 17 mm Oval version for wooden and metal doors. Material chrome plated nickel steel.

15.2 Flat escutcheon oval G.009 For KESO KEK genie BS – Euro profile cylinder Ø 17 mm Round type for wooden and metal doors. Material chrome plated nickel steel.

15.3 Flat escutcheon oval G0.041 For KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm Oval version for wooden and metal doors. Material chrome plated nickel steel.

15.4 Flat escutcheon round G0.042 For KESO KEK genie BS – EuroSwiss cylinder Ø 22 mm Round type for wooden and metal doors. Material chrome plated nickel steel.

KESO KEK genie BS


16 Technical data

16.1 General Details for KESO KEK Electronics Battery Version EG.707 Power supply: Battery operations 3 alkali manganese cells in series Battery type: LR1 Input voltage: 2.7 to 5.5V DC Battery life: Approx. 40,000 openings or approx. 2 years Data security: All data are stored in a non-volatile memory Battery change: Changing the batteries automatically resets the end of battery life detector Reader method: contactless (RFID) Data storage: EEPROM Temperature and humidity: IEC 68-2-1/2/3/14 Mechanical stress: IEC 68-2-6/27 ESD/EMC EN61000-6-2/3 Application type: Stand alone Protection rating: IP50 Operating temperature: -20 to +70°C Storage temperature: -40 to +90°C Humidity: 10 to 95% (non-condensing) Dimensions: 118x38x14.6mm (LxWxH)

16.1.1 HOME Version EG.707 Article No.: EG.707/0HB/00/00 Reaction time: 70ms Management: Manual or via programmer/delete key Programming unit: Master, programming and delete key Programming interface: RF and serial User keys: 256 per electronics unit

16.1.2 PC Version EG.707 Article No.: EG.707/0PB /00/00 Reaction time: 140ms Event logging: 500 events (FIFO) with door designation, person, action Operating modes: Always open Management: via KESO K4 Software Programming unit: KESO KEK programmer USB KESO KEK programmer PPG V1 KESO KEK programmer PPG V2 Programming interface: RF and serial User keys: 8,000 per electronics unit

KESO KEK genie BS


16.1.3 PC TIME Version EG.707 Article No.: EG.707/PTB/00/00 Reaction time: 140ms Clock precision: +/- 3s per day Clock resolution: 1 min Clock power reserve: at least 90s Time slot: 16 (24 hours plus 15 freely programmable) comprising 4 time blocks Special days: 3 time blocks, works holidays, holidays, public holidays Event logging: 500 events (FIFO) with date, time, door designation, person, action Operating modes: Always open / time slot Management: via KESO K4 Software Programming unit: KESO KEK programmer USB KESO KEK programmer PPG V1 KESO KEK programmer PPG V2 Programming interface: RF and serial User keys: 8,000 per electronics unit

KESO KEK genie BS


16.2 General Details for KESO KEK Electronics Mains Version EG.708 Material: Polyamide 66 Color: black Power supply: external Input voltage: 12/24VDC Peak current: at 12V max. 200mA at 24V max. 120mA Ripple: 200/400 mV PP Relay output: Imax=2A; Umax=30V; for resistive load Fall in (FET output) Imax=100mA; Umax=30V; not electrically isolated (open drain) Data security: all data are stored in a non-volatile memory Reader method: contactless (RFID) Reaction time: 140ms Data storage: EEPROM Temperature and humidity: IEC 68-2-1/2/3/14 Mechanical stress: IEC 68-2-6/27 ESD/EMC EN61000-6-2/3 Application type: network connected or stand-alone Protection rating: IP50 Operating temperature: -20 to +70°C Storage temperature: -40 to +90°C Humidity: 10 to 95% (non-condensing) Dimensions: Electronics 118x38x14.6 mm (LxWxH) Management: via KESO K4 Software Programming: online via Ethernet with KESO K4 Software & KESO KEK net Access KESO programmer USB KESO programmer PPG V1 KESO programmer PPG V2 User keys: 8,000 per KESO KEK net electronics unit Programming interface: Ethernet and serial, RF up to a cable length of 2m Output to cylinder: max. 6 m, configurable using dip switches Input RS-485: max. 100 m to KESO KEK net Access

16.2.1 PC Version EG.708 Article No.: EG.708/OPS/00/00 Event logging: 500 events (First in Last out) with door designation, person, action Operating modes: Always open

16.2.2 Electronics - PC TIME Version EG.708 Article No.: EG.708/PTS/00/00 Clock precision: +/- 3s per day Clock resolution: 1 min Clock power reserve ~ 48 hrs. Time slot: 16 (24 hours plus 15 freely programmable) comprising 4 time blocks Special days: 3 time blocks, works holidays, holidays, public holidays Event logging: 500 events (First in Last out) with date, time, door designation, person, action Operating modes: Always open / time slot

KESO KEK genie BS


16.3 KESO KEK Terminal Box KESO KEK terminal boxes are supplied pre-wired.

16.3.1 Plastic 325x275x120 mm (LxWxT) landscape format Article No.: 17.015.01.01.00 Standard variant: - Plastic box with door and

hinge (continuous hinge left) - RJ45 housing box with patch

cable - 3 pcs. PG screw connectors

M16x1 - 4 pcs. M16 grommets

- Assembly platen with two top hat rails

- 16er double row terminal - Circuit breaker - 2 pcs. Relay socket

Protection rating: IP66

16.3.2 Plastic 325x275x120 mm (WxLxT) portrait format Article No.: 17.015.02.01.00 Standard variant: - Plastic box with door and

hinge (continuous hinge left) - RJ45 housing box with patch





Protection rating: IP66

KESO KEK genie BS


16.3.3 Plastic 275x225x80 mm (LxWxT) portrait format Article No.: 17.015.03.01.00 Standard variant: - Plastic box with door and

hinge (continuous hinge left) - 2 pcs. PG screw connectors

M16x1 with reducing plugs - 1 pc. PG screw connectors

M28 - Assembly platen with two

top hat rails - 2 pcs. Terminals for plus pin - 2 pcs. Terminals for minus pin - 1 pc. terminal for protective earth - Circuit breaker - 1 pc. Relay socket

This terminal box cannot be supplied with the drive control unit!

16.3.4 Steel plate 300x300x150 mm (LxWxT) Article No.: 17.015.04.01.00 Basic type: - Metal box with door and hinge

(continuous hinge left) - RJ45 housing box with patch





Protection rating: IP66 Closure: Standard plastic closure


KESO KEK genie BS


16.3.5 Steel plate 300x300x150 cm (LxWxT) lockable Article No.: 17.015.05.01.00 Basic type: - Metal box with door and hinge

(continuous hinge left) - RJ45 housing box with patch





Protection rating: IP66 Closure: Prepared for locking cylinder 13.031, 23.031, 33.031 with flat bolt A3 (E.275 A3)


KESO KEK genie BS


16.4 Technical Specifications Accessories Terminal Box

16.4.1 Power supply 12V / 4.0A / 48 W Article No.: V.001/54/27 Input: 100-240V AC, 1.8 A Output: 12 V, 4.0A Size: approx. 93x78x68 mm (LxWxH)



KESO KEK genie BS


16.4.4 Finder Relay 12V / 230V Article No.: V.001/54/29 Inductor V AC (50/60 Hz) Rated voltage (UN) 12 V DC AC/DC holding level: 0.8 UN / 0.4 UN AC/DC fallback level: 0.2 UN / 0.1 UN Contacts: Number of contacts: 2 two-way contacts Max. continuous current: 8A Max. starting current: 15A Nominal voltage: 250V AC Max. switching capacity AC1: 200 VA Max. switching capacity AC15 (230V AC): 400 VA 1 phase motor load, AC3 (operations): 0.3 kW Max. switching current DC1 (220V): 0.12 A Min. switching current: 300 (5/5) mW (V/mA) Contact material standard: AgNi General information: Reaction time / Release time: 7/3 – (12/4 sensitive) Insulation coordinates: EN 61810-5 4 kV / 2 Ambient temperature: -40C° to +85C° Relay protection class RT II Approval:

16.4.5 Finder Relay 24V / 230V Article No.: V.001/54/30 Inductor V AC (50/60 Hz) Rated voltage (UN) 24 V DC AC/DC holding level: 0.8 UN / 0.4 UN AC/DC fallback level: 0.2 UN / 0.1 UN Contacts: Number of contacts: 2 two-way contacts Max. continuous current: 8A Max. starting current: 15A Nominal voltage: 250V AC Max. switching capacity AC1: 200 VA Max. switching capacity AC15 (230V AC): 400 VA 1 phase motor load, AC3 (operations): 0.3 kW Max. switching current DC1 (220V): 0.12 A Min. switching current: 300 (5/5) mW (V/mA) Contact material standard: AgNi General information: Reaction time / Release time: 7/3 – (12/4 sensitive) Insulation coordinates: EN 61810-5 4 kV / 2 Ambient temperature: -40C° to +85C° Relay protection class RT II Approval:

KESO KEK genie BS


16.4.6 Drive Control Unit EA 420, 509X STRG Article No.: V.001/54/34 Rated voltage 12-24 V DC stab.: +15% / -10% Rated voltage 12-18 V AC: +15% / -10% Current consumption N operations: 80 mA at 12 V DC: 40 mA at 24 V DC: Current consumption motor operations: 450 mA at 12 V DC: 220 mA at 24 V DC: Current consumption maximum: 1300 mA at 12 V DC 600 mA at 24 V DC: Size: approx. 102x121x45 mm (LxWxH) Short Description: 4 Potential-free contacts (30V AC / V DC 0.8A) for Contact evaluation of: Control events

Cylinder contact Door handle actuation

Locking / unlocking of dead bolt Temporary or permanent release Automatic locking during power failure Relocking time: 2-15 sec. adjustable

16.5 General Technical Data KESO KEK Emergency Power Supply Type: Plastic box with lid Size: 325x275x120 mm (WxHxT) Automatic Charger: 230V ~50 Hz for lead batteries Battery type: Lead battery rechargeable Equipment: - Main board with top hat rail - 2 pcs. Grommets - Relay socket with relay Type 40.52 / 8A-250V - Microfuse T3.15 AH, 250V - 1 pc. Terminal for plus pin - 1 pc. Terminal for minus pin - 3 pcs. Terminals for 230V connection (N/P/Earth) - 4 pcs. Cable ties - 1 pc. Mains cable 3-pin approx. 1000 mm length - 1 pc. Mains cable 2-pin approx. 1000 mm length

16.5.1 Emergency Power Supply Version 12 V Article No.: V.001/54/44 Out: 12 V Battery performance: 12V / 5.4Ah

16.5.2 Emergency Power Supply Version 24 V Article No.: V.001/54/45 Out: 24V Battery performance: 12V / 2.7Ah

KESO KEK genie BS


17 End of battery life detection

When a key is inserted, the battery voltage is automatically measured for each action. The sys-tem indicates a drop in battery performance in three stages. Please inform your end users that the system administrator must be notified when any of these indicators occurs. This ensures that you can change the battery in good time. 1. Indicator shortly before end of battery life The key must be inserted twice in order to turn the key. Measures and responses When this indicator occurs, a qualified person should change the battery as soon as

possible. If the cylinder is exposed to extreme temperatures it is advisable to change the battery immediately.

2. Indicator immediately before end of battery life The key must be inserted four times in order to turn the key. Measures and responses When this indicator occurs, the battery must be replaced IMMEDIATELY by a qualified

person. If the battery is not replaced immediately, this can result in the KESO KEK genie BS cylinder only responding to mechanical opening.

3. Indicators at end of battery life The cylinder assumes the preset position, e.g. electronically open or electronically

closed. If you do not specify the status at end of battery life when placing your order, the KESO KEK genie BS cylinder will be delivered with the default powerless open state at end of battery life. If you have a PC version, you can change the powerless state at any time using the KESO K4 software.

Measures and responses If the preset position is <Powerless Status - closed>, the cylinder can only be actuated

from the mechanical side at end of battery life. If the preset position is <Powerless Status - open>, the actuator is switched off at end of battery life and the KEK genie BS cylinder will only check the mechanical function.

KESO KEK genie BS


18 Battery change

A KESO key solution center must be capable of servicing the KESO KEK genie BS cylinder inde-pendently, and of maintaining the KESO KEK genie BS cylinder. The battery lifetime is approx. 40,000 cycles or approx. 2 years. The battery must be replaced at the latest when these thresholds are reached. The KESO KEK genie BS cylinder should be serviced at least once a year. This includes checking the battery status and cylinder action.

Never use force when separating or joining materials. Excessive force leads to damage! When removing the battery, make sure that the cable is not stripped, broken or jammed. Defective cables on the KESO KEK genie BS cylinder cannot be replaced. The cylinder becomes useless and must be returned to KESO (this does not constitute a guarantee case!). Never use hammers or other heavy tools for installation/deinstallation. Knocking the cylinder body or its individual parts could destroy the precision mechani-cal parts and electronics.

18.1 Important notes on batteries

Important note: The battery powers the electronics. Each battery has a different operat-ing voltage. For trouble-free battery use, make sure that the battery voltage is at least 1.45V! The stated battery data are guidelines! KESO AG cannot guarantee these values. You can return batteries to KESO for professional disposal. In all other cases, please ob-serve relevant, national laws and provisions.

KESO KEK genie BS


19 Pin-out for EG.708 Before starting all work, make sure that the separating switch in the connection box is set to OFF position and/or the power supply is disconnected from the power source! Fitters must check this themselves before connecting the cable.

19.1 KEK Electronics Mains Version 19.1.1 Pin-out for Electronics (Layout V1.5) EG.708

Layout V1.5 / pin-out from left to right or top-down.

Reader port RS-232

Buzzer

Cable adjustmentON-ON = 0.5m 1-ON = 2.0m ON-2 = 4.0m 1-2 = 6.0m

Standard setting ON-ON = 0 5m

Peripherals 1: ERDE

2: V IN (12-24 V) 3: GND

4: REL. COM 5: REL. NO 6: REL NC

7: N.A. 8: FALL EIN

9: RK IN 10: BUZZER

KESO KEK genie BS & analog

KESO batchless antenna

Reset KESO digiport 30

LED Block D10: red

D11: green D12; yellow, Power OK

KESO digiport 30 analog

KESO KEK access 1: GND

2: RX 3: /Rx

4: V IN (12-24V) 5: Tx 6: /Tx

7: EARTH

KESO batchless 1: GND

2: RX 3: /Rx

4: V IN (12-24V) 5: Tx 6: /Tx

7: EARTH

Adapter PCB

KESO KEK genie BS


19.1.2 Pin-out for Electronics (Layout V1.4) EG.708 Layout V1.4 / pin-out from left to right or top-down.






LED Block D10: red


Reader port RS-232

RS485 / KEK access 1: GND

2: RX 3: /Rx

4: V IN (12-24V) 5: Tx 6: /Tx

7: EARTH


2: RX 3: /Rx

4: V IN (12-24V) 5: Tx 6: /Tx

7: EARTH

Buzzer

Cable adjustment ON-ON = 0.5m 1-ON = 2.0m ON-2 = 4.0m 1-2 = 6.0m

Standard setting ON-ON = 0.5m

Peripheral Only Adapter PCB Connec-

tion



KESO batchless Antenne

Reader port RS-232

LED-Block D10: rot

D11: grün D12; gelb, Power OK


2: RX 3: /Rx

4: V IN (12-24V) 5: Tx 6: /Tx

7: EARTH

Buzzer

Cable adjustment 11 = 0.5m 10 = 2.0m 01 = 4.0m 00 = 6.0m

Standard setting 11 = 0.5m

Peripherals 1: Buzzer 2: Earth 3: RK IN

4: FALL EIN 5: REL. COM

6: REL NO 7: REL NC

8: GND 9: V IN (12-24V)

RS485 / KEK access 1: GND

2: RX 3: /Rx

4: V IN (12-24V) 5: Tx 6: /Tx

7: EARTH


KESO KEK genie BS







Reader port RS-232

LED Block D10: red


RS 485 KESO batchless

Cable adjustment11 = 0.5m 10 = 2.0m 01 = 4.0m 00 = 6.0m

Standard setting 11 = 0 5m

Peripherals 1: Earth 2: RK IN

3: FALL EIN 4: REL. COM

5: REL NO 6: REL NC

7: GND 8: V IN (12-24V)

KESO KEK access


KESO KEK genie BS& analog


Reader port RS-232

RS 485 KESO batchless

KESO KEK access


KESO MOZY eco IN/OUT

Peripherals 1: REL. COM

2: REL NO 3: REL NC

4: GND 5: V IN (12-24V)


LED Block D10: red


KESO KEK genie BS


19.1.6 Cable adjustment analog

Cable length 0.5 m (ON-ON) Cable length 2.0 m (1-ON) Cable length 4.0 m (ON-2) Cable length 6.0 m (1-2)

19.2 Accessories for EG.708

19.2.1 Adapter PCB pin-out 10-pin to peripherals

19.2.2 Adapter PCB pin-out 7-pin to RS-485

1 EARTH 2 V IN (12-24V) 3 GND 4 REL. COM 5 REL. NO 6 REL. NC 7 8 LATCH IN 9 RK IN 10 BUZZER

Peripheral connectorr Electronics EG.708 and Electronics EG.709

1 GND 2 Rx 3 /Rx 4 V in (12-24V) 5 Tx 6 /Tx 7 EARTH 8 9 10

RS-485 Connector Electronics EG.708 and Electronics EG.709

Example:Switch set to 1 2

V1.5

KESO KEK genie BS


20 Connection example

Before starting all work, make sure that the separating switch in the connection box is set to OFF position and/or the power supply is disconnected from the power source! Fitters must check this themselves before connecting the cable.

The following connection examples are non-exhaustive.

20.1 KESO MOZY eco No cables, apart from the KESO MOZY eco main cable (K.510), are required for use with the 17.015.01… and 17.015.02… terminal boxes. The required cables are provided with the 17.015.01 and 17.015.02 connection boxes and simply require connecting at the right positions.

12345678

1234567

V1.5

KESO KEK genie BS


21 Installation

Installation and assembly must be performed by authorised KESO solution partners. Observe the installation guide; your warranty is voided in case of improper use or installation. Read this installation guide carefully before installing. Observe VDE rules and ESD rules. If you have any queries regarding installation, please contact your dealer.

21.1 Wiring

21.1.1 Basic principles To ascertain the cable lengths and network topology to use, consider the possible distances be-tween the required voltage and the access points in question.

21.1.2 Locking systems The power consumption ratings for locking components, that is, electrical openers, drive cylin-ders, motor locks, switching locks etc. are quoted in the data sheets for these products.

21.2 Installing the KESO KEK genie BS cylinder KESO KEK genie cylinders are easy to handle and install. The basic steps for installation are no different from a commercially-available, mechanical cylinder, however, you must exercise more care when installing the KESO KEK genie cylinder as it is sensitive to knocks and extreme pres-sure! Never overtighten the face plate screws.

Never use force when separating or joining materials. Excessive force leads to damage! When fitting or removing, make sure that the cable is not stripped, broken or jammed. Defective cables on KESO KEK genie cylinders cannot be replaced. The cylinder be-comes useless and must be returned to KESO (this does not constitute a guarantee case!). Never use hammers or other heavy tools for installation/deinstallation. Knock-ing the cylinder body or its individual parts could destroy the precision mechanical parts and electronics.

21.2.1 Cable routing The recess for the electronics must guarantee the ability to fit the cylinder cable without expos-ing it to pressure. The cable inlet must be milled or drilled to avoid kinks or friction that could damage the cylinder cable.

The cylinder cable must be routed behind the lock housing! Never bend the cylinder cable over sharp edges! The cable colour must match those on the connecting plug!

green yellow

red grey

brown white

green yellow

red grey

brown white

KESO KEK genie BS


21.3 Assembly options for face plate versions

KESO KEK genie BS


21.4 Assembly options for fitting versions NOTE The cylinder projection (D) must be at least 18.5 mm from the installation base. For professional installation of the fitting cover, the KESO KEK genie BS cylinder should project by a maximum of 26.5 mm from the installation base. D = minimum 18.5 mm from installation base D = maximum 26.5 mm from installation base

optional base plate

optional adhesive foil

optional adapter box

KESO KEK genie BS


22 KESO KEK Checklist

Use this checklist as a starting point. The checklist is not exhaustive! Always modify the checklist to reflect the requirements of persons and individual buildings!

22.1 Responsibilities • Who is responsible for the overall project management: KESO solution centre, customer,

computer scientist, electrician, cabinet maker, fitter etc.? • Who is the contact for the project customer-side; the task may be assigned to multiple

persons, i.e. security officer, infrastructure, IT etc.? • Who is responsible for wiring the data lines? • Who is responsible for preparing connections such as e.g. cable ducts and sockets for an-

tennas, sockets for the power supply etc.? • Who is responsible for the doors and accessories? • Do you need additional information, such as the number of doors with possible extensions,

step-by-step rollout etc.?

22.2 Implement project planning: • Assign positions and identifiers to each access point/locking point, e.g. main entrance. • With respect to the overall intervention, escape route and access concept per door, define

which components and which accessories are required. • For each door define how the door should behave in offline mode, and how emergency

opening will be handled, e.g. in case of malfunction or power failure. • For each door plan the power supply for additional components. • Define the installation position of the products and components. • Define the data lines/bus wiring taking the distances into consideration, i.e. identify and

define the topology. • Specify IP addresses • Define required user privileges: who needs what authorisation with respect to using the

KESO K4 Software. • Make sure that the user PCs that need access to the system possess the required compo-

nents (software/hardware). • Define access organisation • Define and coordinate third-party tasks. • Define the schedule for the individual steps of the project and monitor their completion. • Plan the installation taking preparatory work by third parties into consideration. • Schedule software training customer side. • Define services and/or support services e.g. in the scope of a Service and Maintenance Con-

tract • Plan approval of the installed components: when and by whom?

KESO KEK genie BS


23 KESO KEK Planning Aids

23.1 Project workflow The following project workflow is designed to facilitate planning for KESO KEK net. This project workflow is not exhaustive and must be modified to reflect the requirements of persons and individual buildings in all cases!

23.1.1 Consultation Hold an advisory meeting. You will need brochures, selling points, etc.

23.1.2 Offer Draft an offer and create a product catalogue. Include a Service and Maintenance Contract.

23.1.3 Kick-Off Organise and hold a project meeting, kick-off meeting. Participants: KESO solution centre, customer, IT, electrician, joiner, fitter etc. Record the details of access points/locking points (identifier, position, function, access etc…), incl. locking tech-nology - what is required, where cables are to be routed, and where equipment is to be mounted. Everyone needs to know what they have to do!

23.1.4 Order Draft orders and submit to appropriate suppliers. Monitor orders and coordinate deadlines.

23.1.5 Training Software user training, prepare a user guide incl. data on privileges

23.1.6 IT Infrastructure Check whether the IT infrastructure is prepared for KESO KEK net. Define and implement any required measures.

23.1.7 Pre-Installation Check if data lines and power supplies for the components are in place. Perform a functional test of the installation.

23.1.8 Installation Assemble and install the components. Perform a functional test of the installation.

23.1.9 Commissioning Commission the system. Individually check each function at each access point/locking point. Make a data backup of the commissioning data.

KESO KEK genie BS


23.1.10 Approval Have the system approved with the KESO solution centre, customer, IT, electrician, joiner, fitter, etc. and create an approval protocol.

23.1.11 Handover Hand over all documentation incl. the approval protocol for access points/locking systems (door management) to the customer.

23.1.12 After Sales Support, service and maintenance to be performed by a solution centre.

KESO KEK genie BS


24 Maintenance / Care / Repairs

24.1 Maintenance To ensure trouble-free operations of cylinders and electronics, we recommend calling in an ap-proved key solution centre. Our solution centres will be pleased to give you details of mainte-nance contracts. In all other cases, please contact KESO AG who will provide the address of a qualified partner who will be pleased to contact you to discuss maintenance contract options and offer you a maintenance contract. Firmware updates must be installed by the customer. Error free functioning of the product can-not be guaranteed if you fail to update the firmware version. The latest firmware can be downloaded from www.keso.com.

24.2 Care Wipe KESO products and accessories with a damp or antistatic cloth. Never use aggressive cleaning agents or clean with silicon oil. This can cause malfunctions. Cylinder locks must be treated with such maintenance products as recommended by us - at least as frequently as indi-cated. Never treat cylinder locks with resinous materials such as oil and graphite. The cleaning agent must be inserted into the cylinder with the key. Never spray cleaning products directly into the cylinder lock! Use only cleaning agents without corrosive substances.

24.3 Repairs Never repair or modify KESO products or accessories. Send defective devices or cables for repair to KESO AG, or to one of our subsidiaries, using the original packaging.

25 ESD Rules Static discharge on electronic subassemblies can cause considerable damage to the assembly; it should not be used in this case. Applicable regulations must be adhered to.

26 Product services Never repair KESO products or accessories. Send defective devices in the original packaging and accompanied by the delivery note to an authorised KESO dealer or to KESO AG for repairs.

KESO KEK genie BS


27 Notes

KESO AG Sicherheitssysteme Untere Schwandenstrasse 22 CH-8805 Richterswil Telefon +41 44 787 34 34 Telefax +41 44 787 35 35 E-Mail [email protected] Internet www.keso.com KESO GmbH KESO SA KESO Italia B.U. Maurerstrasse 6 Succursale Suisse romande Via Modena, 68 D-21244 Buchholz i.d.N Zl. Le Trési 9B I-40017 San Giovanni in Persiceto CH-1028 Préverenges Telefon +49 4181 924-0 Telefon +41 21 811 29 29 Telefon +39 51 681 25 59 Telefax +49 4181 924-100 Telefax +41 21 811 29 00 Telefax +39 51 681 24 01 E-Mail [email protected] E-Mail [email protected] E-Mail [email protected] Internet www.keso.de Internet www.keso.com Internet www.keso.it

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safty and convenience.

PB_0

1_01

1_EN

_KES

O K

EK g

enie

BS

V003

.doc

KESO KEK genie BS - assaabloyopeningsolutions.ch Schweiz...KESO MOZY eco 21.40T. Sleeve material:...

Documents

Transcript of KESO KEK genie BS - assaabloyopeningsolutions.ch Schweiz...KESO MOZY eco 21.40T. Sleeve material:...