Kerr Pulp Canal Sealer EWT for Lubrication
-
Upload
juancarlos-rodriguez -
Category
Documents
-
view
46 -
download
1
description
Transcript of Kerr Pulp Canal Sealer EWT for Lubrication
KerrKerr Pulp Canal Sealer EWT Pulp Canal Sealer EWTfor Lubricationfor Lubrication
1. Double check for dryness to working length with sterile absorbent point.
2. Place to terminus with absorbent point.
3. Remove with absorbent point(s) until slightly “splotchy” (Splotchy Paper Point Test).
4. Now ready to inject pre-warmedpre-warmed GPGP.
Applying Kerr Pulp Canal Sealer EWT
“Splotchy” Paper Point Test
“Splotchy” Paper Point Test
Tips on Use:
Use onlyonly larger 20 gauge needles20 gauge needles
201
Set at highest temp highest temp settingsetting Use SchwedSchwed regular flowregular flow Gutta Percha
Schwed “Regular Flow” pellets
The “SQUIRT”- Feel the pushback
Tips for packing GP:
Preset plugger so no bindingno binding
Use #9 Schilder#9 Schilder plugger, or
Blue Dovgan #60 NiTiDovgan #60 NiTi
5 second5 second “push”
Don’t “bounce” off GP
Keep wad of GPwad of GP ahead
Make sure plugger cleanplugger clean
Use enough pressureenough pressure!
The “PACK”“PACK”