Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are...

10
3D INKJET Keith Wood

TAGS:

Transcript of Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are...

Page 1: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

3D INKJETKeith Wood

Page 2: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

How it Works…

It breaks down 3D models into 2D layers layers of fine powder are deposited onto

the prototype, followed in turn by a layer of liquid binder.

A sealant is added when the part is complete for strength

Page 3: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

How it works cont.

The ZPrinter 450 lays down layers between .0035 and .0040 inches thick (.089 to .102 millimeters)

It can build prototypes that are 8 inches by 10 inches by 8 inches in size (20 by 25 by 20 centimeters).

Page 4: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

Materials

Plaster, corn starch, or resins

http://en.wikipedia.org/wiki/Image:3D_scanning_and_printing.jpg
Page 5: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

Cost

The ZPrinter costs $45,000 and the Spectrum Z510 about $73,000

$$$$

Page 6: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

Cost

I.T. Strategies projects that vendor revenues from inkjet systems, consumables and services used for rapid prototyping will grow from $78 million in 2007 to $148 million by 2012.

Page 7: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

Software

The 3D inkjet uses CAD software like inventor and SolidWorks.

Page 8: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

Speed

Considered the fastest prototyper on the market.

It builds an inch or two an hour

Page 9: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

AMAZING!!!

You could print relief maps of the ocean floor, prototype products for pitch meetings, model human hearts for research or create architectural models to give construction workers a better visual picture of the design plans.

This technology is even being utilized to create artificial bones

Page 10: Keith Wood. How it Works… It breaks down 3D models into 2D layers layers of fine powder are deposited onto the prototype, followed in turn by a layer.

Limitations

The prototypes are usually fragile. The process is still slow Expensive


Intermixing of InGaAs/GaAs quantum wells and quantum dots ......Intermixing of InGaAs/GaAs quantum wells and quantum dots using sputter-deposited silicon oxynitride capping layers

Intermixing of InGaAs/GaAs quantum wells and quantum dots ......Intermixing of InGaAs/GaAs quantum wells and quantum dots using sputter-deposited silicon oxynitride capping layers

Experimental studies of low energy proton irradiation of thin vacuum deposited Aluminum layers T. Renger, M. Sznajder, U.R.M.E. Geppert Chart.

Experimental studies of low energy proton irradiation of thin vacuum deposited Aluminum layers T. Renger, M. Sznajder, U.R.M.E. Geppert Chart.

Au Nanoparticle Formation from Amorphous Au/Si MultilayerThe thin film consists of 60 layers. Both the as-deposited and annealed samples were investigated in transmission electron

Au Nanoparticle Formation from Amorphous Au/Si MultilayerThe thin film consists of 60 layers. Both the as-deposited and annealed samples were investigated in transmission electron

Sedimentary Rocks - pams7thscience.wikispaces.com · states that younger rocks are deposited on top of older ones. ... of sedimentary rocks in distinct layers ... Not found in other

Sedimentary Rocks - pams7thscience.wikispaces.com · states that younger rocks are deposited on top of older ones. ... of sedimentary rocks in distinct layers ... Not found in other

Preferentially oriented BaTiO3 thin films deposited on ...photonics.intec.ugent.be/download/pub_3245.pdf · on silicon with thin intermediate buffer layers ... X-ray diffraction measurements

Preferentially oriented BaTiO3 thin films deposited on ...photonics.intec.ugent.be/download/pub_3245.pdf · on silicon with thin intermediate buffer layers ... X-ray diffraction measurements

JEOLOJİK ZAMAN - jeoloji.ogu.edu.tr · Figure 8.3 Most layers of sediment are deposited in a nearly horizontal position. Thus, when we see rock layers that are inclined, we can assume

JEOLOJİK ZAMAN - jeoloji.ogu.edu.tr · Figure 8.3 Most layers of sediment are deposited in a nearly horizontal position. Thus, when we see rock layers that are inclined, we can assume

Rock Strata These are rock layers under the surface. They are normally flat (horizontal) when deposited. Fold Fault Stratigrapher Geologist.

Rock Strata These are rock layers under the surface. They are normally flat (horizontal) when deposited. Fold Fault Stratigrapher Geologist.

Inspection of Laser Powder Deposited Layers

Inspection of Laser Powder Deposited Layers

GROWTH OF EPITAXIAL ZIRCONIUM CARBIDE LAYERS …ufdcimages.uflib.ufl.edu/UF/E0/01/30/64/00001/woo_j.pdf4.3.1 Laser Fluence and Temperature Effect on Deposited Films .....33 4.3.2 Deposition

GROWTH OF EPITAXIAL ZIRCONIUM CARBIDE LAYERS …ufdcimages.uflib.ufl.edu/UF/E0/01/30/64/00001/woo_j.pdf4.3.1 Laser Fluence and Temperature Effect on Deposited Films .....33 4.3.2 Deposition

23.6 Earth’s History Layers of rock are deposited horizontally, like the layers of the Grand Canyon shown here.

23.6 Earth’s History Layers of rock are deposited horizontally, like the layers of the Grand Canyon shown here.

Dependent on Diborane Flux - pdfs.semanticscholar.org · layers on semiconductor substrates for p-njunctions. BSG layers can thereby be deposited by various techniques, such as gas

Dependent on Diborane Flux - pdfs.semanticscholar.org · layers on semiconductor substrates for p-njunctions. BSG layers can thereby be deposited by various techniques, such as gas

The Grand Canyon Megan Pickard TESSE 2009. Law of Original Horizontality Sediments are deposited in layers that are horizontal.

The Grand Canyon Megan Pickard TESSE 2009. Law of Original Horizontality Sediments are deposited in layers that are horizontal.

December 1968 o urne 29 No. 4 - WorldRadioHistory.Com · 2020. 3. 23. · WERNER KERN Diffusion Characteristics and Applications of Doped Silicon Dioxide Layers Deposited from Silane

December 1968 o urne 29 No. 4 - WorldRadioHistory.Com · 2020. 3. 23. · WERNER KERN Diffusion Characteristics and Applications of Doped Silicon Dioxide Layers Deposited from Silane

Austenitic stainless steels layers deposited by laser cladding on a ...

Austenitic stainless steels layers deposited by laser cladding on a ...

Chapter 9 Thin Film Deposition. Introduction The layers on top of the silicon substrate are usually deposited The layers on top of the silicon substrate.

Chapter 9 Thin Film Deposition. Introduction The layers on top of the silicon substrate are usually deposited The layers on top of the silicon substrate.

D retention in bulk Be and D co-deposited in Be layers ...dpc.nifs.ac.jp/.../presentation/O-9_Zlobinski_FuelRetentionInBe_V4pdf… · D retention in bulk Be and D co-deposited in

D retention in bulk Be and D co-deposited in Be layers ...dpc.nifs.ac.jp/.../presentation/O-9_Zlobinski_FuelRetentionInBe_V4pdf… · D retention in bulk Be and D co-deposited in

Efficient vacuum deposited p-i-n and n-i-p perovskite ... · Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers Cristina Momblona1,†,

Efficient vacuum deposited p-i-n and n-i-p perovskite ... · Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers Cristina Momblona1,†,

Characteristics of co-deposited carbon layers on …Characteristics of co-deposited carbon layers on tungsten nano-structure Background 1 Introduction Carbon (C) and tungsten (W) are

Characteristics of co-deposited carbon layers on …Characteristics of co-deposited carbon layers on tungsten nano-structure Background 1 Introduction Carbon (C) and tungsten (W) are

Study of dynamical properties in fl-TCP/CH layers · STUDY OF DYNAMICAL PROPERTIES IN fl-TCP/CH LAYERS 139 FIGURE 1. XRD patterns of fl-TCP/Ch coatings deposited with different

Study of dynamical properties in fl-TCP/CH layers · STUDY OF DYNAMICAL PROPERTIES IN fl-TCP/CH LAYERS 139 FIGURE 1. XRD patterns of fl-TCP/Ch coatings deposited with different

Grade 10 - gifs.africa · 2.Weathering breaks down rocks at surface 3.Erosion of rocks creates sediments 4.Sediments are deposited into the oceans 5.Compaction and cementation causes

Grade 10 - gifs.africa · 2.Weathering breaks down rocks at surface 3.Erosion of rocks creates sediments 4.Sediments are deposited into the oceans 5.Compaction and cementation causes