KCX Series - .: KPT Group :. Spec..pdf · · 2015-12-30Cam Electronic Counter / Controller SENSOR...
-
Upload
nguyenngoc -
Category
Documents
-
view
213 -
download
0
Transcript of KCX Series - .: KPT Group :. Spec..pdf · · 2015-12-30Cam Electronic Counter / Controller SENSOR...
499
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
Classification Model Number Digit
Retentive Feature for
Power Failure
Counting SpeedPower Supply for Sensors
Supply Voltage Price
Preset Counter
Single preset
Increment type with input/output
display
KCX-1 1 For both 10 Hz and 200 Hz
12 V DC, 50 mA
90 to 132 V AC 180 to 264 V AC
50/60 Hz
Open
KCX-2 2 Open
KCX-3 3 For both 10 Hz and 1 kHz
Open
KCX-4 4 Open
Increment type with numerical
display
KCX-1D 1For both 10 Hz
and 200 Hz
Open
KCX-2D 2 Open
KCX-2DM 2 ● Open
KCX-3D 3
For both 10 Hz and 1 kHz
Open
KCX-3DM 3 ● Open
KCX-4D 4 Open
KCX-4DM 4 ● Open
KCX-5D 5
For both 10 Hz and 5 kHz
Open
KCX-5DM 5 ● Open
KCX-6D 6 Open
KCX-6DM 6 ● Open
Add-subtract type with numerical
display
KCX-B6 6For both 10 Hz
and 20 kHz24 V DC, 80 mA
Open
KCX-B6M 6 ● Open
Double preset(With numerical
display)
Increment type
KCX-3W 3For both 10 Hz
and 2 kHz12 V DC, 50 mA
Open
KCX-4W 4 Open
KCX-4WM 4 ● Open
KCX-5W 5For both 10 Hz
and 5 kHz
Open
KCX-6W 6 Open
KCX-6WM 6 ● Open
Add-subtract typeKCX-B6W 6 For both 10 Hz
and 20 kHz24 V DC,
80mAOpen
KCX-B6WM 6 ● Open
Total Counter Increment type
KCX-4T 4 ● For both 10 Hz and 1 kHz
12 V DC, 50 mA
Open
KCX-6T 6 ● For both 10 Hz and 5 kHz
Open
KCX-8T 8 ● For both 10 Hz and 10 kHz
Open
Add-subtract type KCX-B6T 6 ● For both 10 Hz and 20 kHz
24 V DC, 80 mA
Open
(Accessories) Mounting brackets, dust cover
KCX SeriesList of Model Numbers
500
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
KCX-□,□D/DMFeatures
Green Counter Increment Type, Single Preset- Maximum counting speed For 1 and 2 digits: for both 10 Hz and 200 Hz For 3 and 4 digits: for both 10 Hz and 1 kHz For 5 and 6 digits: for both 10 Hz and 5 kHz- The 1 to 6-digit preset electronic counter uses an easy-to-see, bright
green color for the numerical display and the input/output display. The electronic counter features various user-friendly functions including thorough dust prevention measures and power failure measures.
■FeaturesEasy-to-see Green DisplayAn easy-to-see green display is used for the numerical display and the input/output display (The numerical display is a green LED with a character height of 8 mm.)
Equipped with a Dust Cover as a Standard FeatureAll models are equipped with a dust cover as a standard feature, and the setter can be operated from outside the dust cover.
Improved Space FactorAll models for 1 digit to 6 digits have a small design with the front outer shape being DIN size (72 x 72 mm) and an overall depth of 103.5 mm.
Retentive Memory without Battery BackupAn EEPROM is used for memory storage and a battery that does not require maintenance is used.
Built-in Power Source for SensorsAll models for 1 digit to 6 digits have a built-in 12 V DC, 50 mA power source for sensors and, therefore, can be directly connected to sensors such as proximity sensors, photoelectronic sensors, and rotary encoders.
Wide Variable Range for Output TimeIn the case of speci�c time output operation (A-type operation), the output time can be varied from 50 to 1,000 ms using the volume on the front part of the counter. Moreover, by installing a capacitor on the terminal, the output time can be increased to up to 10 s.
For Both A-type (Specific Time Output) and B-type (Self-holding Output)The A-type operation and the B-type operation can be switched by changing the connection of the terminal.
Six Kinds of Operation ModesThe best operation mode can be selected.
A Wide Range of Supply VoltageThe supply voltage covers 90 to 132 V AC and 180 to 264 V AC.
Counting Input can be Prohibited.By applying input to the counting input inhibit terminal, counting input can be interrupted to stop counting.
For Both Embedded and Surface-Mount InstallationIn the case of embedded installation, the counter can be attached to the panel simply by tightening the dedicated mounting bracket from the back side. In the case of surface-mount installation, the counter can be mounted to and removed from the F terminal (terminal block) by one-touch operation.
Dust Cover
Digital Switch
DedicatedMounting Brackets
B Stand (Terminal Block) or Connector
Stand F (Terminal Block)
Body
With input/output displayWith numerical display
501
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
■Specifications
Model Number
With Input/Output Display
Standard KCX-1 KCX-2 KCX-3 KCX-4
With Numerical Display
Standard KCX-1D KCX-2D KCX-3D KCX-4D KCX-5D KCX-6D
Power Failure Memory Type
KCX-2DM KCX-3DM KCX-4DM KCX-5DM KCX-6DM
Digit 1 digit 2 digits 3 digits 4 digits 5 digits 6 digits
Operation Format For both A-type (Specific time output type, automatic reset) and B-type (Output holding type)
Count Input
Contact input Non-contact input Contact input Non-contact input Contact input Non-contact input
Maximum counting speed 10 Hz 200 Hz 10 Hz 1 kHz 10 Hz 5 kHz
Minimum pulse width 50 ms 2.5 ms 50 ms 0.5 ms 50 ms 0.1 ms
Input resistance 6 kΩ 12 kΩ 6 kΩ 12 kΩ 6 kΩ 12 kΩ
Input voltage "L" 0 to 2 V/"H" 6 to 30 V
External Reset
Response timeDelay ON time: 20 ms Delay OFF time: 4 ms
Delay ON time: 10 ms Delay OFF time: 2 ms
Delay ON time: 5 ms Delay OFF time: 1 ms
Input resistance 6 kΩ
Input voltage "L" 0 to 2 V/"H" 6 to 30 V
Automatic Reset Reset time 5 ms or less 1 ms or less 0.2 ms or less
Power Source Reset*1
Power supply shutdown time
Minimum of 0.2 s is required.
Reset time 0.2 s or less
Voltage Output*2
Output resistance 1.2 kΩ (No-load voltage 12 V)
Output current Source: 2.5 mA Sink: 8.0 mA
Withstand voltage 45 V
Output time A-type: (Variable), B-type: Self-holding
Contact Output
Contact capacity 250 V AC 2 A
Number of circuits Transfer 1 circuit (1c)
Output time A-type: (Variable), B-type: Self-holding
Electrical life 1 million times or more (250 V AC resistance load)
Mechanical life 1 million times or more
Input/Output Response Time*3
10 Hz 200 Hz 10 Hz 1 kHz 10 Hz 5kHz
Voltage Output Approx. 10 ms Approx. 4 ms Approx. 10 ms Approx. 0.8 ms Approx. 10 ms Approx. 0.15 ms
Contact output Approx. 20 ms Approx. 14 ms Approx. 20 ms Approx. 10 ms Approx. 20 ms Approx. 10 ms
Power Failure Memory Function
EEPROM Number of overwrite cycles: 100,000 cycles or more
Storage time 10 years
Input gate response time when power failure occurs*4*5
20 to 200 ms (typ, 70 ms)
Input gate response time when the power returns*6 50 to 500 ms (typ, 120 ms)
Power Source for Sensors
12 V ±2 V DC 50 mA Ripple 5% (rms) or lower
Withstand Voltage 2kV AC 1 min (Between AC power supply terminal, E terminal, and relay contact terminal)
Insulation Resistance 500 V DC 20 MΩ or higher
Vibration ResistanceCompliant with JIS C 0911. Endurance vibration: Displacement amplitude 0.5 mm, 10 to 55 Hz, 3 axial directions Malfunction vibration: Displacement amplitude 0.35 mm, 10 to 55 Hz, 3 axial directions
Supply Voltage 90 to 132 V AC/180 to 264 V 50/60 Hz
Power Consumption With numerical display: Approx. 5 VA With input/output display: Approx. 3 VA
Use Ambient Temperature(When Operated)
Power-on: 0 to +40˚C Memory storage: -10 to +50˚C
Storage Temperature -20 to +55˚C
Use / Storage Ambient Humidity
35 to 85% RH (No condensation)
Noise Resistance*7 1 μs width, square-wave pulse, 1 kV
Weight 0.5 kg
KCX-□,□D/DMSpecifications
502
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
KCX-□,□D/DMSpecifications
Precautions (See the previous page.)
*1 The power source reset is applied to models except the power failure memory types (KCX-1 to 4, KCX-1D to 6D).
The "reset time" of the power source reset refers to the time when counting is disabled when the power is turned on.
*2 Voltage output (Non-contact output) When connected to a 12 V system《P load》
When connected to a 12 V system《N load》
When connected to a 24 V system
*3 The time from the generation of the �nal pulse of the input signal that reaches the set value in the counting input terminal to the output of the counter.
*4 The power failure detecting circuit starts operating simultaneously with a power failure, and stops the function of each input circuit (counting and reset input) after a certain period of time, and prevents the counting or reset operation even if an input signal is added.
The "input gate response time when power failure occurs" refers to the time until the functions of each input circuit stop. Each input circuit performs normal operation during this time.
*5 During a power failure, the functions of each input circuit are stopped.
When the power returns, however, each input circuit resumes normal operation by the function of the detection circuit.
The "input gate response time when the power returns" refers to the time until each input circuit resumes normal operation and can start receiving the counting input and the reset input after the power is returned.
*6 Other than these tests, we confirm the functions by our original test methods including electrostatic discharge tests, inductive load switching tests, and electromagnetic switch oscillation tests in order to ensure safe operation.
+12 V
Source 2.4 kΩ 6 V or higher
+12 V
0.8 V or lowerSink
+12 to +14 V
2kΩ
+12 V
Sink
+24 V
Vc
Vc≦3 V when the sink current is 20 mA
+12 V
Source 2.4 kΩ 6 V or higher
+12 V
0.8 V or lowerSink
+12 to +14 V
2kΩ
+12 V
Sink
+24 V
Vc
Vc≦3 V when the sink current is 20 mA
+12 V
Source 2.4 kΩ 6 V or higher
+12 V
0.8 V or lowerSink
+12 to +14 V
2kΩ
+12 V
Sink
+24 V
Vc
Vc≦3 V when the sink current is 20 mA
A
B
C
D
Contact Input
Non-contact InputKCX
Voltage Output (Non-contact Output)
Contact Output
A/B
C
D
t1
t2
t1: Non-contact Output response
t2: Contact Output response
503
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
KCX-□,□D/DMOperation
■OperationA-type Operation (Specific Time Output Operation)- When the number of input pulse signals reaches the preset value (count-
up), the output is produced.- The output time is approx. 50 to 1,000 ms (volume variable).- If the counter counts up, the counting circuit and the counting display (for
the models equipped with a numerical display) are automatically reset, and the operation can be repeated.
- Output is also reset by external reset during output time.
《Retentive memory type》 When resetting the counting: Add the external reset signal.
《Normal type》 When resetting the counting: ① add the external reset signal.
Or shut down the power source ② temporarily (0.2 s or longer).
■A-Type/B-Type Operation Switching Connection Method
When terminal ④ (E) and terminal ⑤ (CH1) are connected, the counter performs the B-type operation, and if they are not connected, the counter performs the A-type operation. In the case of B-type operation (terminals ④ and ⑤ are connected), if the counter counts up, models equipped with a numerical display reset the counting display to 0. To prevent the counting display from being reset, connect terminals ④, ⑤ and ⑥. In this way, if the counter counts up, the counting display does not become 0, and if an input is added, it is counted for the count-up display.
B-type Operation (Self-holding Output Operation)- If the number of input pulse signals reaches the preset value (count-up),
the output is produced and held. - In the case of the models equipped with a numerical display, if terminal ④
(E), terminal ⑤ (CH1) and terminal ⑥ (CH2) are connected, the counting display is not reset even if the counter counts up, and if the input signal is added, it is counted for the count-up display. However, when terminal ④ (E) and terminal ⑤ (CH1) are connected, if the counter counts up, the counting display is reset to 0. (See the "A-type /B-type operation switching connection method".)
《Retentive memory type》 When resetting the output signal and counting: Add the external reset signal.
《Normal type》 When resetting the output signal and counting: ①Add the external reset signal.
Or shut down the power source ② temporarily (0.2 s or longer).
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Approx. 50 to 1000 ms
ONOFF
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Approx. 50 to 1000 ms
t≧0.2 s
t≧0.2 s
ONOFF
ONOFF
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
ONOFF
t≧0.2 s
A 停電記憶形の場合
A 標準形の場合
B 停電記憶形の場合
B 標準形の場合
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Approx. 50 to 1000 ms
ONOFF
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Approx. 50 to 1000 ms
t≧0.2 s
t≧0.2 s
ONOFF
ONOFF
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
ONOFF
t≧0.2 s
A 停電記憶形の場合
A 標準形の場合
B 停電記憶形の場合
B 標準形の場合
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Approx. 50 to 1000 ms
ONOFF
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Approx. 50 to 1000 ms
t≧0.2 s
t≧0.2 s
ONOFF
ONOFF
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
ONOFF
t≧0.2 s
A 停電記憶形の場合
A 標準形の場合
B 停電記憶形の場合
B 標準形の場合
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Approx. 50 to 1000 ms
ONOFF
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Approx. 50 to 1000 ms
t≧0.2 s
t≧0.2 s
ONOFF
ONOFF
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
Set Value
Discrete Value(Indicated Value)
ExternalReset Input
Output
Power Source
Count Input
ONOFF
t≧0.2 s
A 停電記憶形の場合
A 標準形の場合
B 停電記憶形の場合
B 標準形の場合
2
1
3
4
5
6
7
+12 V
IN (10 cps)
IN (High Speed)
E
CH2
CH1
R
(Counter)
Type B Operation
504
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
■Terminal AssignmentWith I/O Indicators
Terminal Number
Symbol Description
1 +12 V Power source for sensor
2 IN (10 Hz) Counting input for low speed
3 IN Counting input for high speed*1
4 E Ground*2 (Capacitor )
5 CHSwitching specific time output/ Holding output (Capacitor )
6 Not connected
7 R External reset input
8 OUT Non-contact output
9 COM.
Relay contact output 10 N.O.
11 N.C.
12 180 to 264 V AC
AC power input13 90 to 132 V AC
14 0 V AC
Models with a Numerical Display
Terminal Number
Symbol Description
1 +12 V Power source for sensor
2 IN (10 Hz) Counting input for low speed
3 IN Counting input for high speed*1
4 E Ground*2 (Capacitor )
5 CH1Switching specific time output/ Holding output (Capacitor )
6 CH2Switching automatic reset / Non-automatic reset
7 R External reset input
8 OUT Non-contact output
9 COM.
Relay contact output 10 N.O.
11 N.C.
12 180 to 264 V AC
AC power input13 90 to 132 V AC
14 0 V AC
*1 See Specifications. *2 Capacitor connection terminal for output time extension.
■Terminal ConnectionsConnection of Counting Input1. In the case of contact input signals
2. In the case of no-contact input signals The counting input can be selected from low-speed input and high-speed input.
3. Connection to the open collector output The counting becomes the reverse action. (Counting when the open collector output changes
from ON to OFF)
+12 V
IN (10 Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
CountingSignal
12 V
Count Input
Reset InputResetSignal
(Low Speed)
(High Speed)
4.7 kΩor lower
4.7 kΩor lower
12 V
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
4.7 kΩor lower
4.7 kΩor lower
PLC
2
1
3
4
5
6
7
1. 接点入力信号の場合
2. 無接点入力信号の場合
3.オープンコレクタ出力との接続
+12 V
IN (10 Hz)2 mA
2
1
A
B
A BInput Voltage Input Circuit
T1 T0
ton toff
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10 Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
CountingSignal
12 V
Count Input
Reset InputResetSignal
(Low Speed)
(High Speed)
4.7 kΩor lower
4.7 kΩor lower
12 V
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
4.7 kΩor lower
4.7 kΩor lower
PLC
2
1
3
4
5
6
7
1. 接点入力信号の場合
2. 無接点入力信号の場合
3.オープンコレクタ出力との接続
+12 V
IN (10 Hz)2 mA
2
1
A
B
A BInput Voltage Input Circuit
T1 T0
ton toff
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10 Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
CountingSignal
12 V
Count Input
Reset InputResetSignal
(Low Speed)
(High Speed)
4.7 kΩor lower
4.7 kΩor lower
12 V
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
4.7 kΩor lower
4.7 kΩor lower
PLC
2
1
3
4
5
6
7
1. 接点入力信号の場合
2. 無接点入力信号の場合
3.オープンコレクタ出力との接続
+12 V
IN (10 Hz)2 mA
2
1
A
B
A BInput Voltage Input Circuit
T1 T0
ton toff
(Counter)
(Counter)
(Counter)
(Counter)
KCX-□,□D/DMConnection
505
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
Connection of the Output1. Contact output Electric current is applied to load A and is not applied to load B when counting is completed.
2. Non-contact output 《Source load》
《Sink load》 In this operation, the current �ows in when the output is in the "L" state. This operation is reversed from the normal open collector output, and the output becomes "H"
when the counter counts up.
8
9
10
11
12
13
14
COM
N.O.
N.C.
Load A
Load B
Power Source for Load
E
OUT(+)
(− )
2.5 mA or lower
Non-contact Output VoltageL: 0.8 V or lowerH: 6 V or higher
2.4 kΩ or higher
8
9
10
11
12
13
14
2
1
3
4
5
6
7
E
OUT(+)
(− )
20 mA or lower
Non-contact Output VoltageL: 2 V or lower
45 V or lowerRL
E
8
9
10
11
12
13
14
2
1
3
4
5
6
7
接点出力の場合
無接点出力の場合《 ソース負荷の場合 》
《 シンク負荷の場合 》
Load
(Counter)
(Counter)
(Counter)
8
9
10
11
12
13
14
COM
N.O.
N.C.
Load A
Load B
Power Source for Load
E
OUT(+)
(− )
2.5 mA or lower
Non-contact Output VoltageL: 0.8 V or lowerH: 6 V or higher
2.4 kΩ or higher
8
9
10
11
12
13
14
2
1
3
4
5
6
7
E
OUT(+)
(− )
20 mA or lower
Non-contact Output VoltageL: 2 V or lower
45 V or lowerRL
E
8
9
10
11
12
13
14
2
1
3
4
5
6
7
接点出力の場合
無接点出力の場合《 ソース負荷の場合 》
《 シンク負荷の場合 》
Load
(Counter)
(Counter)
(Counter)
8
9
10
11
12
13
14
COM
N.O.
N.C.
Load A
Load B
Power Source for Load
E
OUT(+)
(− )
2.5 mA or lower
Non-contact Output VoltageL: 0.8 V or lowerH: 6 V or higher
2.4 kΩ or higher
8
9
10
11
12
13
14
2
1
3
4
5
6
7
E
OUT(+)
(− )
20 mA or lower
Non-contact Output VoltageL: 2 V or lower
45 V or lowerRL
E
8
9
10
11
12
13
14
2
1
3
4
5
6
7
接点出力の場合
無接点出力の場合《 ソース負荷の場合 》
《 シンク負荷の場合 》
Load
(Counter)
(Counter)
(Counter)
KCX-□,□D/DMConnection
Contact input (1) When used as shown in the �gure below, the voltage and current that
�ow through the contact point are around 2 mA. Therefore, the use of the contact point for minute electric current improves reliability. Since the contact point of the electromagnetic switch is designed for large current and high voltage, it is not suitable for use for contact input of the counter.
(2) The input response of the counting input terminal ② (10 Hz) has the following characteristics.
Since the values above are standard values, T1 and T0 should have values more than 3 times the values above for actual input signals.Example) Contact input using the power source for sensor (12 V DC) T1: 24 ms or more, T0: 24 ms or more are required.
Input Voltage Delay ON Time (ton) Delay OFF Time (toff)
6 V 16 ms 4 ms
12 V 8 ms 8 ms
30 V 3 ms 23 ms
+12 V
IN (10 Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
CountingSignal
12 V
Count Input
Reset InputResetSignal
(Low Speed)
(High Speed)
4.7 kΩor lower
4.7 kΩor lower
12 V
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
4.7 kΩor lower
4.7 kΩor lower
PLC
2
1
3
4
5
6
7
1. 接点入力信号の場合
2. 無接点入力信号の場合
3.オープンコレクタ出力との接続
+12 V
IN (10 Hz)2 mA
2
1
A
B
A BInput Voltage Input Circuit
T1 T0
ton toff
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10 Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
CountingSignal
12 V
Count Input
Reset InputResetSignal
(Low Speed)
(High Speed)
4.7 kΩor lower
4.7 kΩor lower
12 V
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
4.7 kΩor lower
4.7 kΩor lower
PLC
2
1
3
4
5
6
7
1. 接点入力信号の場合
2. 無接点入力信号の場合
3.オープンコレクタ出力との接続
+12 V
IN (10 Hz)2 mA
2
1
A
B
A BInput Voltage Input Circuit
T1 T0
ton toff
(Counter)
(Counter)
(Counter)
(Counter)
506
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
KCX-□,□D/DMConnection
Simple Input Inhibit Method Using an Unused Input TerminalIf the contact point is closed and the input is forcibly applied to terminal ②, the sensor is prohibited from counting.However, when the sensor output (terminal ③) is in the "L" state, if the contact point of input inhibit is closed, the count increases by 1 pulse.
How to Prohibit Counting when Output is ProducedWhen using the sensor at high speed, wire the cables as shown by the dotted lines.(Diode: Equivalent to Hitachi 1S2076)
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
Red (Brown)
(For Reset)
Black (Blue)
Black (Blue)
Red(Brown)
White (Black)
White (Black)
(Low speed)
High speed
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
(For Counting)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Input Inhibit
Sensor
2
1
3
4
5
6
7
IN (High Speed)
E
IN (High Speed)
E
R
12 V
CountingSignal
R≦ ─ (kΩ)
N: Numbers of counter that can be connected in parallel.N12
3
4
3
4
+12 V
IN (10Hz)
IN (High Speed)
E
R
OUT
Sensor
8
9
10
11
12
13
14
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
E
Count Input
+12 V
IN (10 Hz)
E
2
1
4
2
1
4
センサを直結する場合
カウンタを並列稼働させる場合1. 接点入力信号の場合
2. 無接点入力信号の場合
入力空き端子を利用した簡易入力禁止の方法
出力発生時に計数を禁止する方法
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
Red (Brown)
(For Reset)
Black (Blue)
Black (Blue)
Red(Brown)
White (Black)
White (Black)
(Low speed)
High speed
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
(For Counting)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Input Inhibit
Sensor
2
1
3
4
5
6
7
IN (High Speed)
E
IN (High Speed)
E
R
12 V
CountingSignal
R≦ ─ (kΩ)
N: Numbers of counter that can be connected in parallel.N12
3
4
3
4
+12 V
IN (10Hz)
IN (High Speed)
E
R
OUT
Sensor
8
9
10
11
12
13
14
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
E
Count Input
+12 V
IN (10 Hz)
E
2
1
4
2
1
4
センサを直結する場合
カウンタを並列稼働させる場合1. 接点入力信号の場合
2. 無接点入力信号の場合
入力空き端子を利用した簡易入力禁止の方法
出力発生時に計数を禁止する方法
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
■Example of ConnectionWhen Directly Connected to the SensorsA consumption current of +12 V should be 50 mA or less in total.
When Operating the Counters in Parallel1. In the case of contact input signals
2. In the case of no-contact input signals
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
Red (Brown)
(For Reset)
Black (Blue)
Black (Blue)
Red(Brown)
White (Black)
White (Black)
(Low speed)
High speed
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
(For Counting)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Input Inhibit
Sensor
2
1
3
4
5
6
7
IN (High Speed)
E
IN (High Speed)
E
R
12 V
CountingSignal
R≦ ─ (kΩ)
N: Numbers of counter that can be connected in parallel.N12
3
4
3
4
+12 V
IN (10Hz)
IN (High Speed)
E
R
OUT
Sensor
8
9
10
11
12
13
14
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
E
Count Input
+12 V
IN (10 Hz)
E
2
1
4
2
1
4
センサを直結する場合
カウンタを並列稼働させる場合1. 接点入力信号の場合
2. 無接点入力信号の場合
入力空き端子を利用した簡易入力禁止の方法
出力発生時に計数を禁止する方法
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
Red (Brown)
(For Reset)
Black (Blue)
Black (Blue)
Red(Brown)
White (Black)
White (Black)
(Low speed)
High speed
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
(For Counting)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Input Inhibit
Sensor
2
1
3
4
5
6
7
IN (High Speed)
E
IN (High Speed)
E
R
12 V
CountingSignal
R≦ ─ (kΩ)
N: Numbers of counter that can be connected in parallel.N12
3
4
3
4
+12 V
IN (10Hz)
IN (High Speed)
E
R
OUT
Sensor
8
9
10
11
12
13
14
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
E
Count Input
+12 V
IN (10 Hz)
E
2
1
4
2
1
4
センサを直結する場合
カウンタを並列稼働させる場合1. 接点入力信号の場合
2. 無接点入力信号の場合
入力空き端子を利用した簡易入力禁止の方法
出力発生時に計数を禁止する方法
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
Red (Brown)
(For Reset)
Black (Blue)
Black (Blue)
Red(Brown)
White (Black)
White (Black)
(Low speed)
High speed
Proximity Sensor,Photoelectric Sensor,Rotary Encoder, etc.
(For Counting)
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
IN (High Speed)
E
R
Input Inhibit
Sensor
2
1
3
4
5
6
7
IN (High Speed)
E
IN (High Speed)
E
R
12 V
CountingSignal
R≦ ─ (kΩ)
N: Numbers of counter that can be connected in parallel.N12
3
4
3
4
+12 V
IN (10Hz)
IN (High Speed)
E
R
OUT
Sensor
8
9
10
11
12
13
14
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
E
Count Input
+12 V
IN (10 Hz)
E
2
1
4
2
1
4
センサを直結する場合
カウンタを並列稼働させる場合1. 接点入力信号の場合
2. 無接点入力信号の場合
入力空き端子を利用した簡易入力禁止の方法
出力発生時に計数を禁止する方法
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
507
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
■List of Operation ModesIn the case of models with a numerical display, six operation modes are enabled as shown below.
OutputDiscrete Value
When Counting Up Prohibition of Counting
Input During Output
Timing ChartTerminal
ConnectionsHolding Output
Switching Specific Time
OutputReset No Reset
● ●
● ● ④-⑤-⑥
● ● ④-⑤
● ● ●②-⑧* or ③-⑧
● ● ●
②-⑧* or ③-⑧ ④-⑤-⑥
● ● ●
②-⑧* or ③-⑧ ④-⑤
* If the voltage terminal (terminal ⑧) is connected to the low speed input terminal (terminal ②), until the input is prohibited after counting up, the counter has the same responsivity as the low speed input terminal.
KCX-□,□D/DMConnection
Specific Time
Input Counting
Output
Count Up
Input Counting
Output
External Reset
Input Counting
Output
External Reset
Count Up
Set Value is Maintained.
Input Counting
Output
External Reset
Count Up
B-type Operation
Input Counting
Output
External Reset
Count Up
SpecificTime
A-type Operation
Input Counting
Output
Specific Time
Input Counting
Output
Count Up
Input Counting
Output
External Reset
Input Counting
Output
External Reset
Count Up
Set Value is Maintained.
Input Counting
Output
External Reset
Count Up
B-type Operation
Input Counting
Output
External Reset
Count Up
SpecificTime
A-type Operation
Input Counting
Output
Specific Time
Input Counting
Output
Count Up
Input Counting
Output
External Reset
Input Counting
Output
External Reset
Count Up
Set Value is Maintained.
Input Counting
Output
External Reset
Count Up
B-type Operation
Input Counting
Output
External Reset
Count Up
SpecificTime
A-type Operation
Input Counting
Output
Specific Time
Input Counting
Output
Count Up
Input Counting
Output
External Reset
Input Counting
Output
External Reset
Count Up
Set Value is Maintained.
Input Counting
Output
External Reset
Count Up
B-type Operation
Input Counting
Output
External Reset
Count Up
SpecificTime
A-type Operation
Input Counting
Output
Specific Time
Input Counting
Output
Count Up
Input Counting
Output
External Reset
Input Counting
Output
External Reset
Count Up
Set Value is Maintained.
Input Counting
Output
External Reset
Count Up
B-type Operation
Input Counting
Output
External Reset
Count Up
SpecificTime
A-type Operation
Input Counting
Output
Specific Time
Input Counting
Output
Count Up
Input Counting
Output
External Reset
Input Counting
Output
External Reset
Count Up
Set Value is Maintained.
Input Counting
Output
External Reset
Count Up
B-type Operation
Input Counting
Output
External Reset
Count Up
SpecificTime
A-type Operation
Input Counting
Output
508
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
KCX-□W/WMFeatures
Green Counter Increment Type, Double Preset- Maximum counting speed For 3 and 4 digits: for both 10 Hz and 2 kHz For 5 and 6 digits: for both 10 Hz and 5 kHz- The 3 to 6-digit double preset electronic counter uses an
easy-to-see, bright green color for the numerical display. The electronic counter consolidates various functions in its compact body,
including thorough dust prevention measures and power failure measures.
■FeaturesEasy-to-see Green DisplayThe numerical display is an easy-to-see green display.(Green LED with 8 mm high characters)
Miniature (All Models: DIN Size 72 x 72 mm)All 3-digit to 6-digit models are compact with the front outer shape being DIN size (72 x 72 mm) and the overall depth 103.5 mm.
Equipped with a Dust Cover as a Standard FeatureAll models are equipped with a dust cover as a standard feature, and the setter can be operated from outside the dust cover.
Counting Input can be Prohibited.By applying input to the counting input inhibit terminal, counting input can be interrupted to stop counting.
Retentive Memory without Battery BackupAn EEPROM is used for memory storage and a battery that does not require maintenance is used.
A Wide Range of Supply VoltageThe KCX-□W/WM has a wide range of input voltages from 4.5 to 30 V DC and supports input sources from 5 to 24 V systems. Moreover, one model can cover a supply voltage of 90 to 132 V AC and 180 to 264 V AC, thus can be used across a wide range of supply voltages.
Wide Variable Range for Output TimeIn the case of the speci�c time output (A-type operation), the output time can be varied from approx. 50 to 1,000 ms using the volume on the back of the counter.
For the Specific Time Output Type and the Self Holding Output TypeSpecific time output (A-type operation) and self-holding output (B-type operation) can be switched from a switch on the back.
For Both Low Speed Input and High Speed InputLow speed input (10 Hz) and high speed input (3- to 4-digit = 2 kHz, 5- to 6-digit = 5 kHz) can be switched from a switch on the back.
Built-in Power Source for SensorsSince the counter has a 12 V DC, 50mA built-in power source for sensors, it can be connected to proximity sensors, photoelectronic sensors, and rotary encoders.
For Both Embedded and Surface-Mount InstallationIn the case of embedded installation, the counter can be attached to the panel simply by tightening the dedicated mounting bracket from the back side. In the case of surface-mount installation, the counter can be mounted to and removed from the F terminal (terminal block) by one-touch operation.
Dust Cover
DedicatedMounting Brackets
B Stand (Terminal Block) or Connector
Stand F (Terminal Block)
Body
1
AB
2
Output Time Adjustment Volume
Counting Speed Changing SwitchOperation Mode Changing Switch
Switch 1 Switch 2
Operation mode Counting speed
A A-type operation 2 kHz3・4 W 4 WM
5 kHz5・6 W 6 WM
B B-type operation 10 Hz
509
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
■Specifications
Model NumberStandard KCX-3W KCX-4W KCX-5W KCX-6W
Retentive Memory Type KCX-4WM KCX-6WM
Digit 3 digits 4 digits 5 digits 6 digits
Operation FormatFirst set: Only B type (Self-holding output) Second set: A type (Specific time output)Can be switched to B type (Back side switch).
Count Input
Maximum counting speed10 Hz
Changed by switch
2 kHz10 Hz
Changed by switch
5 kHz
Minimum pulse width10 Hz: 50 ms 2 kHz: 0.25 ms
10 Hz: 50 ms 5 kHz: 0.1 ms
Input resistance 6 kΩ
Input voltage "L" 0 to 2 V, "H" 4.5 to 30 V
Disabled Count Input
Response timeOn delay: 0.25 ms or less Off delay: 0.25 ms or less
On delay: 0.1 ms or less Off delay: 0.1 ms or less
Input resistance 6 kΩ
Input voltage "L" 0 to 2 V, "H" 4.5 to 30 V
External Reset
Response timeOn delay: 10 ms or less Off delay: 2 ms or less
On delay: 4 ms or less Off delay: 0.8 ms or less
Input resistance 6 kΩ
Input voltage "L" 0 to 2 V, "H" 4.5 to 30 V
Automatic Reset Reset time 0.5 ms or less 0.2 ms or less
Power Source Reset (KCX-3 to 6W)
Power supply shutdown time
200 ms or more
Reset time 200 ms or less
Voltage Output
Output resistance 1.2 kΩ (No-load voltage 12 V)
Output current Source: 2.5 mA Sink: 8 mA
Withstand voltage 45 V
Output time 50 ms to 1s
Contact Output
Contact capacity 250 V AC 2A
Number of circuits 1 make (1c)
Output time 50 ms to 1s
Mechanical life 10 million times or more (Resistance load)
Electrical life 1 million times or more (Resistance load)
Input/Output Response Time
Voltage Output10 Hz: 10 ms 2 kHz: 0.4 ms
10 Hz: 10 ms 5 kHz: 0.15 ms
Contact output10 Hz: 20 ms 2 kHz: 10 ms
10 Hz: 20 ms 5 kHz: 10 ms
Power Failure Memory Function KCX-4WM KCX-6WM
EEPROM Number of overwrite cycles: 100,000 cycles or more
Storage time 10 years
Input gate response time when power failure occurs
200 ms or less
Input gate response time when the power returns
200 ms or less
Power Source for Sensor DC 12 V ±2 V 50 mA Ripple 5% (rms) or lower
Supply Voltage 90 to 132 V AC/180 to 264 V AC 50/60 Hz Approx. 5.5 VA
Use Ambient Temperature
Power-on: 0 to +40˚C Memory storage: -10 to +50˚C
Storage Temperature -20 to +55˚C
Use / Storage Ambient Humidity
35 to 85% RH (No condensation)
Weight 0.5 kg
Withstand Voltage 2kV AC 1 min (Between AC power supply terminal, E terminal, and relay contact terminal)
Insulation Resistance 500 V DC 20 MΩ or higher
Vibration ResistanceCompliant with JIS C 0911. Endurance vibration: Displacement amplitude 0.5 mm 10 to 55 Hz, 3 axial directions Malfunction vibration: Displacement amplitude 0.35 mm 10 to 55 Hz, 3 axial directions
KCX-□W/WMSpecifications
510
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
KCX-□W/WMOperation
■OperationA-type Operation (Specific Time Output Operation)- Counting is enabled 0.2 sec after the power is turned on.- If an input of 4.5 to 30 V is applied to counting inhibit input terminal ③
during counting, the counting input can be interrupted to stop counting.- If the counting inhibit input is removed, counting will resume. When the counting input number reaches the �rst set value (count up),
output is produced. Since the �rst set output is only for B-type operation, the output is retained by itself.
- When the counting input number reaches the second set value, the second set output is produced. At this time, when the counter counts up, the counting circuit and the counting display are automatically and simultaneously reset, thus counting will resume.
- At the same time that the second set output becomes 0, the first set output also becomes 0.
- If an input of 4.5 to 30 V is applied to external reset input terminal ⑦ during counting, the discrete value is reset to 0. Moreover, at this time, if the counter counts up in the �rst setting or both the �rst and second setting, the output is also reset.
- The KCX-□WM has a power failure memory function that can memorize the discrete value and the output state if the power is shut down.
- In the case of the KCX-□W, if the power is supplied after being shut down for 0.2 sec or longer, the power source reset circuit operates to reset the discrete value and the output.
《Normal type》 When resetting the counting: ①Add the external reset signal.
Or shut down the power source ② temporarily (0.2 s or longer).
《Retentive memory type》 When resetting the counting: Add the external reset signal.
B-type Operation (Self-holding Output Operation)- Counting is enabled 0.2 sec after the power is turned on.- If an input of 4.5 to 30 V is applied to counting inhibit input terminal ③
during counting, the counting input can be interrupted to stop counting.- If the counting inhibit input is removed, counting will resume. When the counting input number reaches the �rst set value (count up),
output is produced. Since the �rst set output is only for B-type operation, the output is retained by itself.
- When the counting input number reaches the second set value, the second set output is produced and retained by itself.
- When an input of 4.5 to 30 V is applied the external reset input terminal ⑦, the discrete value and the output are reset.
- The KCX-□WM has a power failure memory function that can memorize the discrete value and the output state if the power is shut down.
- In the case of KCX-□W, if the power is supplied after being shut down for 0.2 sec or longer, the power source reset circuit operates to reset the discrete value and the output.
《Normal type》 When resetting the counting: ①Add the external reset signal.
Or shut down the power source ② temporarily (0.2 s or longer).
《Retentive memory type》 When resetting the counting: Add the external reset signal.
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
50 ms to 1 s
Second Set Value
First Set Value
t≧0.2 s
t≧0.2 s
Power Source
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
Power Source
Second Set ValueFirst Set Value
50 ms to 1 s
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
Power Source
Second Set ValueFirst Set Value
t≧0.2 s
t≧0.2 s
Count Input
Disabled Count Input
First Set Output
Second Set Output
External Reset Input
External Reset Input
External Reset Input
External Reset Input
Discrete Value
Power Source
Second Set ValueFirst Set Value
A型動作 標準型
A型動作 停電記憶型
B型動作 標準型
B型動作 停電記憶型
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
50 ms to 1 s
Second Set Value
First Set Value
t≧0.2 s
t≧0.2 s
Power Source
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
Power Source
Second Set ValueFirst Set Value
50 ms to 1 s
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
Power Source
Second Set ValueFirst Set Value
t≧0.2 s
t≧0.2 s
Count Input
Disabled Count Input
First Set Output
Second Set Output
External Reset Input
External Reset Input
External Reset Input
External Reset Input
Discrete Value
Power Source
Second Set ValueFirst Set Value
A型動作 標準型
A型動作 停電記憶型
B型動作 標準型
B型動作 停電記憶型
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
50 ms to 1 s
Second Set Value
First Set Value
t≧0.2 s
t≧0.2 s
Power Source
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
Power Source
Second Set ValueFirst Set Value
50 ms to 1 s
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
Power Source
Second Set ValueFirst Set Value
t≧0.2 s
t≧0.2 s
Count Input
Disabled Count Input
First Set Output
Second Set Output
External Reset Input
External Reset Input
External Reset Input
External Reset Input
Discrete Value
Power Source
Second Set ValueFirst Set Value
A型動作 標準型
A型動作 停電記憶型
B型動作 標準型
B型動作 停電記憶型
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
50 ms to 1 s
Second Set Value
First Set Value
t≧0.2 s
t≧0.2 s
Power Source
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
Power Source
Second Set ValueFirst Set Value
50 ms to 1 s
Count Input
Disabled Count Input
First Set Output
Second Set Output
Discrete Value
Power Source
Second Set ValueFirst Set Value
t≧0.2 s
t≧0.2 s
Count Input
Disabled Count Input
First Set Output
Second Set Output
External Reset Input
External Reset Input
External Reset Input
External Reset Input
Discrete Value
Power Source
Second Set ValueFirst Set Value
A型動作 標準型
A型動作 停電記憶型
B型動作 標準型
B型動作 停電記憶型
511
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
Connection of the Output1. Contact output The contact output allows only a-contact for both the �rst setting and the second setting.
2. Non-contact output 《Source load》
《Sink load》
Connection of a Counting Prohibit Input1. In the case of contact input signals If counting is prohibited for the contact signal, the counting input can be used
only for low-speed input.
2. In the case of no-contact input signals
■Terminal AssignmentTerminal Number
Symbol Description
1 +12 V Power source for sensor
2 INCount Input (Low speed / High speed switch change)
3 INH Disabled count input
4 E Ground
5 OUT1 Non-contact output
6 OUT2 Non-contact output
7 R External reset input
8OUT1 Contact output (a-contact)
9
10OUT2 Contact output (a-contact)
11
12 180 to 264 V AC
AC power input13 90 to 132 V AC
14 0 V AC
KCX-□W/WMConnection
■Terminal ConnectionsConnection of Counting Input1. In the case of contact input signals Change the switch setting on the back to low speed input (10 Hz).
2. In the case of no-contact input signals The counting input can be selected from low-speed input and high-speed input.
When used as shown in the �gure below, the voltage and current that �ow through the contact point are around 2 mA. Therefore, the use of the contact point for minute electric current improves reliability. Since the contact point of the electromagnetic switch is designed for large current and high voltage, it is not suitable for use for contact input of the counter.
+12 V
IN (10Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
Count Input接点入力信号
Count Input無接点入力信号
出力接続無接点出力 ソース負荷
出力接続接点出力
出力接続無接点出力 シンク負荷
計数禁止入力接点出力
計数禁止入力接点出力
Count Input
+12 V
IN
E
R
4.7 kΩor lower
4.7 kΩor lower
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
KCX2 mA2
1
LoadPower Source for LoadOUT1
OUT2Load
Power Source for Load
8
9
10
11
12
13
14
E
OUT2
OUT1Load
Load
2.5 mA or lower
2.5 mA or lower
L: 0.8 V or lower
H: 6 V or higher
2
1
3
4
5
6
7
+12 V
IN (10 Hz)Count Input
Disabled Count Input(ON: Counting is Prohibited.)
2
1
3
4
5
6
7
INCountInput
Transistor OFF: Counting is Prohibited.
CountingSignal
12 V
4.7 kΩor lower 2
1
3
4
5
6
7
OUT2
OUT1
Load
Load
8 mA(Up to 20 mA)
8 mA (Up to 20 mA)
45 Vor lower
L: 0.8 V or lowerWhen the sink current is 20 mA: 3 V or lower
2
1
3
4
5
6
7
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
Count Input接点入力信号
Count Input無接点入力信号
出力接続無接点出力 ソース負荷
出力接続接点出力
出力接続無接点出力 シンク負荷
計数禁止入力接点出力
計数禁止入力接点出力
Count Input
+12 V
IN
E
R
4.7 kΩor lower
4.7 kΩor lower
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
KCX2 mA2
1
LoadPower Source for LoadOUT1
OUT2Load
Power Source for Load
8
9
10
11
12
13
14
E
OUT2
OUT1Load
Load
2.5 mA or lower
2.5 mA or lower
L: 0.8 V or lower
H: 6 V or higher
2
1
3
4
5
6
7
+12 V
IN (10 Hz)Count Input
Disabled Count Input(ON: Counting is Prohibited.)
2
1
3
4
5
6
7
INCountInput
Transistor OFF: Counting is Prohibited.
CountingSignal
12 V
4.7 kΩor lower 2
1
3
4
5
6
7
OUT2
OUT1
Load
Load
8 mA(Up to 20 mA)
8 mA (Up to 20 mA)
45 Vor lower
L: 0.8 V or lowerWhen the sink current is 20 mA: 3 V or lower
2
1
3
4
5
6
7
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
Count Input接点入力信号
Count Input無接点入力信号
出力接続無接点出力 ソース負荷
出力接続接点出力
出力接続無接点出力 シンク負荷
計数禁止入力接点出力
計数禁止入力接点出力
Count Input
+12 V
IN
E
R
4.7 kΩor lower
4.7 kΩor lower
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
KCX2 mA2
1
LoadPower Source for LoadOUT1
OUT2Load
Power Source for Load
8
9
10
11
12
13
14
E
OUT2
OUT1Load
Load
2.5 mA or lower
2.5 mA or lower
L: 0.8 V or lower
H: 6 V or higher
2
1
3
4
5
6
7
+12 V
IN (10 Hz)Count Input
Disabled Count Input(ON: Counting is Prohibited.)
2
1
3
4
5
6
7
INCountInput
Transistor OFF: Counting is Prohibited.
CountingSignal
12 V
4.7 kΩor lower 2
1
3
4
5
6
7
OUT2
OUT1
Load
Load
8 mA(Up to 20 mA)
8 mA (Up to 20 mA)
45 Vor lower
L: 0.8 V or lowerWhen the sink current is 20 mA: 3 V or lower
2
1
3
4
5
6
7
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
Count Input接点入力信号
Count Input無接点入力信号
出力接続無接点出力 ソース負荷
出力接続接点出力
出力接続無接点出力 シンク負荷
計数禁止入力接点出力
計数禁止入力接点出力
Count Input
+12 V
IN
E
R
4.7 kΩor lower
4.7 kΩor lower
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
KCX2 mA2
1
LoadPower Source for LoadOUT1
OUT2Load
Power Source for Load
8
9
10
11
12
13
14
E
OUT2
OUT1Load
Load
2.5 mA or lower
2.5 mA or lower
L: 0.8 V or lower
H: 6 V or higher
2
1
3
4
5
6
7
+12 V
IN (10 Hz)Count Input
Disabled Count Input(ON: Counting is Prohibited.)
2
1
3
4
5
6
7
INCountInput
Transistor OFF: Counting is Prohibited.
CountingSignal
12 V
4.7 kΩor lower 2
1
3
4
5
6
7
OUT2
OUT1
Load
Load
8 mA(Up to 20 mA)
8 mA (Up to 20 mA)
45 Vor lower
L: 0.8 V or lowerWhen the sink current is 20 mA: 3 V or lower
2
1
3
4
5
6
7
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
Count Input接点入力信号
Count Input無接点入力信号
出力接続無接点出力 ソース負荷
出力接続接点出力
出力接続無接点出力 シンク負荷
計数禁止入力接点出力
計数禁止入力接点出力
Count Input
+12 V
IN
E
R
4.7 kΩor lower
4.7 kΩor lower
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
KCX2 mA2
1
LoadPower Source for LoadOUT1
OUT2Load
Power Source for Load
8
9
10
11
12
13
14
E
OUT2
OUT1Load
Load
2.5 mA or lower
2.5 mA or lower
L: 0.8 V or lower
H: 6 V or higher
2
1
3
4
5
6
7
+12 V
IN (10 Hz)Count Input
Disabled Count Input(ON: Counting is Prohibited.)
2
1
3
4
5
6
7
INCountInput
Transistor OFF: Counting is Prohibited.
CountingSignal
12 V
4.7 kΩor lower 2
1
3
4
5
6
7
OUT2
OUT1
Load
Load
8 mA(Up to 20 mA)
8 mA (Up to 20 mA)
45 Vor lower
L: 0.8 V or lowerWhen the sink current is 20 mA: 3 V or lower
2
1
3
4
5
6
7
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
Count Input接点入力信号
Count Input無接点入力信号
出力接続無接点出力 ソース負荷
出力接続接点出力
出力接続無接点出力 シンク負荷
計数禁止入力接点出力
計数禁止入力接点出力
Count Input
+12 V
IN
E
R
4.7 kΩor lower
4.7 kΩor lower
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
KCX2 mA2
1
LoadPower Source for LoadOUT1
OUT2Load
Power Source for Load
8
9
10
11
12
13
14
E
OUT2
OUT1Load
Load
2.5 mA or lower
2.5 mA or lower
L: 0.8 V or lower
H: 6 V or higher
2
1
3
4
5
6
7
+12 V
IN (10 Hz)Count Input
Disabled Count Input(ON: Counting is Prohibited.)
2
1
3
4
5
6
7
INCountInput
Transistor OFF: Counting is Prohibited.
CountingSignal
12 V
4.7 kΩor lower 2
1
3
4
5
6
7
OUT2
OUT1
Load
Load
8 mA(Up to 20 mA)
8 mA (Up to 20 mA)
45 Vor lower
L: 0.8 V or lowerWhen the sink current is 20 mA: 3 V or lower
2
1
3
4
5
6
7
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
Count Input接点入力信号
Count Input無接点入力信号
出力接続無接点出力 ソース負荷
出力接続接点出力
出力接続無接点出力 シンク負荷
計数禁止入力接点出力
計数禁止入力接点出力
Count Input
+12 V
IN
E
R
4.7 kΩor lower
4.7 kΩor lower
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
KCX2 mA2
1
LoadPower Source for LoadOUT1
OUT2Load
Power Source for Load
8
9
10
11
12
13
14
E
OUT2
OUT1Load
Load
2.5 mA or lower
2.5 mA or lower
L: 0.8 V or lower
H: 6 V or higher
2
1
3
4
5
6
7
+12 V
IN (10 Hz)Count Input
Disabled Count Input(ON: Counting is Prohibited.)
2
1
3
4
5
6
7
INCountInput
Transistor OFF: Counting is Prohibited.
CountingSignal
12 V
4.7 kΩor lower 2
1
3
4
5
6
7
OUT2
OUT1
Load
Load
8 mA(Up to 20 mA)
8 mA (Up to 20 mA)
45 Vor lower
L: 0.8 V or lowerWhen the sink current is 20 mA: 3 V or lower
2
1
3
4
5
6
7
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
+12 V
IN (10Hz)
R
Reset Input
Count Input(ON: Count)
(ON: Reset)
2
1
3
4
5
6
7
Count Input接点入力信号
Count Input無接点入力信号
出力接続無接点出力 ソース負荷
出力接続接点出力
出力接続無接点出力 シンク負荷
計数禁止入力接点出力
計数禁止入力接点出力
Count Input
+12 V
IN
E
R
4.7 kΩor lower
4.7 kΩor lower
2
1
3
4
5
6
7
+12 V
IN (10 Hz)
KCX2 mA2
1
LoadPower Source for LoadOUT1
OUT2Load
Power Source for Load
8
9
10
11
12
13
14
E
OUT2
OUT1Load
Load
2.5 mA or lower
2.5 mA or lower
L: 0.8 V or lower
H: 6 V or higher
2
1
3
4
5
6
7
+12 V
IN (10 Hz)Count Input
Disabled Count Input(ON: Counting is Prohibited.)
2
1
3
4
5
6
7
INCountInput
Transistor OFF: Counting is Prohibited.
CountingSignal
12 V
4.7 kΩor lower 2
1
3
4
5
6
7
OUT2
OUT1
Load
Load
8 mA(Up to 20 mA)
8 mA (Up to 20 mA)
45 Vor lower
L: 0.8 V or lowerWhen the sink current is 20 mA: 3 V or lower
2
1
3
4
5
6
7
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
(Counter)
512
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
KCX-□TFeatures
Green Display Total Counter- Maximum counting speed KCX-4T: for both 10 Hz and 1 kHz KCX-6T: for both 10 Hz and 5 kHz KCX-8T: for both 10 Hz and 10 kHz- An easy-to-see, bright green color is used for the numerical display. The total counter realizes enhanced usability with a wide range of
voltages and plethora of functions.
■FeaturesEasy-to-see Green DisplayThe numerical display is an easy-to-see green display.(Green LED with 8 mm high characters)
Counting Input can be Prohibited.By applying input to the counting input inhibit terminal, counting input can be interrupted to stop counting.
Retentive Memory without Battery BackupAn EEPROM is used for memory storage and a battery that does not require maintenance is used.
A Wide Range of Supply VoltageSince the KCX-□T has a wide input voltage range of 4.5 to 30 V DC, it can support TTL level to the input source of a 24 V DC system. Moreover, one model can cover the supply voltages of 90 to 132 V AC and 180 to 264 V AC, thus can be used for a wide range of supply voltages.
Latch FunctionsBy adding input to the latch input terminal, the discrete value at that time can be latched and displayed. When the latch input is removed, the current discrete value is displayed.
Manual Reset can be Prohibited.The functions of the front manual reset button can be prohibited to prevent misoperation.
Zero Suppression FunctionUnnecessary 0 (zeros) of high-order digits are not displayed.
Built-in Power Source for SensorsSince the counter has a 12 V DC, 50 mA built-in power source for sensors, it can be connected to proximity sensors, photoelectronic sensors, and rotary encoders.
Equipped with a Dust Cover as a Standard FeatureEquipped with dustproof, waterproof cover as a standard feature. The reset button can be operated from outside the cover.
For Both Embedded and Surface-Mount InstallationIn the case of embedded installation, the counter can be attached to the panel simply by tightening the dedicated mounting bracket from the back side. In the case of surface-mount installation, the counter can be mounted to and removed from the F terminal (terminal block) by one-touch operation.
DedicatedMounting Brackets
B Stand (Terminal Block) or Connector
Stand F (Terminal Block)
Body
Dust Cover
513
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
KCX-□TSpecifications
■SpecificationsModel Number KCX-4T KCX-6T KCX-8T
Digit 4 digits 6 digits 8 digits
Count Input
Maximum counting speed For both 10 Hz/1 kHz For both 10 Hz/5 kHz For both 10 Hz/10 kHz
Minimum pulse width 10 Hz: 50 ms 1 kHz: 0.5 ms 10 Hz: 50 ms 5kHz: 0.1 ms 10 Hz: 50 ms 10 kHz: 50 μs
Input resistance 10 Hz: 6 kΩ 1 kHz: 12 kΩ 10 Hz: 6 kΩ 5kHz: 12 kΩ 10 Hz: 6 kΩ 10 kHz: 12 kΩ
Input voltage "L" 0 to 2 V, "H" 4.5 to 30 V
Disabled Count Input
Response timeOn delay: 1 ms or less Off delay: 1 ms or less
On delay: 0.2 ms or less Off delay: 0.2 ms or less
On delay: 0.1 ms or less Off delay: 0.1 ms or less
Input resistance 6 kΩ
Input voltage "L" 0 to 2 V, "H" 4.5 to 30 V
Manual Reset With the front button (Manual reset is prohibited by short-circuiting terminals ① and ⑥.)
External Reset
Response timeOn delay: 1.0 ms or less Off delay: 1.0 ms or less
On delay: 1.0 ms or less Off delay: 1.0 ms or less
On delay: 1.0 ms or less Off delay: 1.0 ms or less
Input resistance 6 kΩ
Input voltage "L" 0 to 2 V, "H" 4.5 to 30 V
Retentive Feature for Power Failure
EEPROM Number of overwrite cycles: 100,000 cycles or more
Storage time 10 years
Input gate response time when power failure occurs
200 ms or less
Input gate response time when the power returns
200 ms or less
Latch Input
Response time 0.5 ms or less 0.1 ms or less 0.1 ms or less
Input resistance 6 kΩ
Input voltage "L" 0 to 2 V, "H" 4.5 to 30 V
Power Source for Sensor 12 V DC ±2 V 50 mA Ripple 5% (rms) or lower
Supply Voltage 90 to 132 V AC/180 to 264 V AC 50/60 Hz 5 VA
Use Ambient Temperature
Power-on: 0 to +40˚C Memory storage: -10 to +50˚C
Storage Temperature -20 to +50˚C (Can be stored at -20 to +70˚C for about 1 week during transport)
Use / Storage Ambient Humidity
35 to 85% RH (No condensation)
Weight Approx. 0.5 kg
Withstand Voltage 2 kV AC 1 min (Between AC power supply terminal, E terminal, and relay contact terminal)
Insulation Resistance 500 V DC 20MΩ or higher
Vibration ResistanceCompliant with JIS C 0911. Endurance vibration: Displacement amplitude 0.5 mm 10 to 55 Hz, 3 axial directions Malfunction vibration: Displacement amplitude 0.35 mm 10 to 55 Hz, 3 axial directions
514
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
■Terminal AssignmentTerminal Number
Symbol Description
1 +12 V Power source for sensor
2 IN (10 Hz) Counting input for low speed
3IN (1 kHz/5 kHz/10 kHz)
Counting input for high speed
4 E Ground
5 INH Disabled count input
6 RD Manual reset prohibition terminal
7 R External reset input
8 (Not connected)
9 (Not connected)
10 L Latch input
11 (Not connected)
12 180 to 264 V AC
AC power input13 90 to 132 V AC
14 0 V AC
■Operation- Counting is enabled 0.2 sec after the power is turned on.- When the front manual reset button is pressed or a voltage of 4.5 to 30 V
is applied to external reset terminal ⑦, the previous memorized discrete value is reset to 0. At this time, the zero suppression function works and 0s from the second digit and higher are not displayed.
- When using the KCX-□T at not more than 10 Hz (10 counts per second), if a counting input signal of a width of 50 ms or more is applied, or when using the KCX-□T at not more than 1 kHz (not more than 5 kHz for KCX-6T, not more than 10 Hz for KCX-8T), if a counting input signal of a width of 0.5 ms (0.1 ms for KCX-6T, 50 μs for KCX-8T) or more is applied, the numerical display increases and the total number of input signals is displayed. Input terminal ② is used for connections of not more than 10 Hz and input terminal ③ is used for connections of not more than 1 kHz (5 kHz and 10 kHz).
- If an input of 4.5 to 30 V is applied to counting inhibit input terminal ⑤ during counting, the counting input can be interrupted to stop counting.
- During counting, if an input of 4.5 to 30 V is applied to latch input terminal ⑩, the discrete value at that time is memorized and displayed. When the latch input is removed, the current discrete value is displayed.
《Operation chart》
KCX-□TOperation
Power Source
Count Input
Discrete Value
Manual Reset
Indicated Value
Disabled Count Input
Manual Reset Prohibition
External Reset
Latch Input
515
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
■Terminal ConnectionsConnection of Counting Input1. In the case of contact input signals
2. In the case of no-contact input signals The counting input can be selected from low-speed input and high-speed input.
When used as shown in the figure below, the voltage and current that flow through the contact point are around 2 mA. Therefore, the use of the contact point for minute electric current improves reliability. Since the contact point of the electromagnetic switch is designed for large current and high
voltage, it is not suitable for use for contact input of the counter.
Connection of a Counting Prohibit Input1. In the case of contact input signals
2. In the case of no-contact input signals The counting input can be either low speed input or high speed input.
Connection of a Latched Input1. In the case of contact input signals When using the latch for the contact signal, only low speed input can be used as the counting
input.
2. In the case of no-contact input signals The counting input can be either low speed input or high speed input.
How to Prohibit Manual Reset
KCX-□TConnection
+12 V
IN (10 Hz)
L
Count InputLatch Input
ON: Latch
8
9
10
11
12
13
14
2
1
3
4
5
6
7
8
9
10
11
12
13
14
2
1
3
4
5
6
7
IN (10 Hz)
L
E
12 V
Count Input
4.7 kΩor lower
Transistor OFF:Latch
IN (High Speed)
接点入力信号
無接点入力信号
(Counter)
(Counter)
+12 V
IN (10 Hz)
L
Count InputLatch Input
ON: Latch
8
9
10
11
12
13
14
2
1
3
4
5
6
7
8
9
10
11
12
13
14
2
1
3
4
5
6
7
IN (10 Hz)
L
E
12 V
Count Input
4.7 kΩor lower
Transistor OFF:Latch
IN (High Speed)
接点入力信号
無接点入力信号
(Counter)
(Counter)
IN (10 Hz)
Count Input IN (High Speed)
Manual ResetProhibition Input
ON: Prohibit
E
R
RD
8
9
10
11
12
13
14
2
1
3
4
5
6
7
(Counter)
+12 V
IN (10 Hz)
R
2
1
3
4
5
6
7
接点入力信号
無接点入力信号
+12 V
IN (10 Hz)2 mA
2
1(Counter)
+12 V
IN (10 Hz)
IN (High Speed)
E
R
12 V
Reset Input
12 V
2
1
3
4
5
6
7
Count Input
(Low speed)
(High speed)
Reset Input
Count Input(ON: Count)
(ON: Reset)
CountingSignal
ResetSignal
4.7 kΩor lower
4.7 kΩor lower
(Counter)
(Counter)
+12 V
IN (10 Hz)
R
2
1
3
4
5
6
7
接点入力信号
無接点入力信号
+12 V
IN (10 Hz)2 mA
2
1(Counter)
+12 V
IN (10 Hz)
IN (High Speed)
E
R
12 V
Reset Input
12 V
2
1
3
4
5
6
7
Count Input
(Low speed)
(High speed)
Reset Input
Count Input(ON: Count)
(ON: Reset)
CountingSignal
ResetSignal
4.7 kΩor lower
4.7 kΩor lower
(Counter)
(Counter)
+12 V
IN (10 Hz)
R
2
1
3
4
5
6
7
接点入力信号
無接点入力信号
+12 V
IN (10 Hz)2 mA
2
1(Counter)
+12 V
IN (10 Hz)
IN (High Speed)
E
R
12 V
Reset Input
12 V
2
1
3
4
5
6
7
Count Input
(Low speed)
(High speed)
Reset Input
Count Input(ON: Count)
(ON: Reset)
CountingSignal
ResetSignal
4.7 kΩor lower
4.7 kΩor lower
(Counter)
(Counter)
Count Input
Transistor OFF: Counting is Prohibited.
IN (10 Hz)
IN (High Speed)
E
INH
12 V2
1
3
4
5
6
7
IN (10 Hz)
+12 V
INH
Count Input
Disabled Count Input(Counting is Prohibited)
2
1
3
4
5
6
7
接点入力信号
無接点入力信号
(Counter)
(Counter)4.7 kΩ
or lower
Count Input
Transistor OFF: Counting is Prohibited.
IN (10 Hz)
IN (High Speed)
E
INH
12 V2
1
3
4
5
6
7
IN (10 Hz)
+12 V
INH
Count Input
Disabled Count Input(Counting is Prohibited)
2
1
3
4
5
6
7
接点入力信号
無接点入力信号
(Counter)
(Counter)4.7 kΩ
or lower
516
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
KCX-BFeatures
High Speed Increment-Decrement Counter, Single, Double Preset- Maximum counting speed: for both 10 Hz and 20 kHz- The 6-digit preset electronic counter with the green display can be used
for operations in both the increment mode and the decrement mode.- In increment to the operation as a conventional preset counter,
the KCX-B has a comparative operation mode and can be used for counting and identifying items. The KCX-B can switch between positive logic and negative logic for input and output, and can be connected to source and sink input/output.
■FeaturesSwitchable to Count Up and DownThe operation mode can be switched between increment and decrement.The KCX-B can be used for a wide range of applications including high-precision sizing cutters and winding machines.
Equipped with a Dust Cover as a Standard FeatureAll models are equipped with a dust cover as a standard feature, and the setter can be operated from outside the dust cover.
High Speed Response of 20 kHzThe KCX-B has a miniature design of 72 x 72 mm but enables high-speed counting of 20 kHz.Since the counting speed can be changed to 10 Hz, the KCX-B can be also used for contact input.
Supports 2-phase Phase Difference Input / Add-subtract Individual Input.Other than rotary encoders, input devices such as proximity sensors and relay contacts can be used. In the case of add-subtract individual input, since both increment input and decrement input can be simultaneously input, the KCX-B can be used to manage the quantity of workpieces on conveyers and the numbers of cars in parking lots.
Wide-ranging Output Operation Mode Select FunctionThe output operation mode can be switched using a rotary switch on the back. In increment to conventional coincidence output operation, 6 kinds of output operation modes for the single setting type and 10 kinds of output operation modes for the double setting type can be selected, including comparative output operation.
Increment
Decrement
P2
P1
OUT1
OUT2
Increment
Decrement
P2
P1
OUT1
OUT2
517
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
KCX-BSpecifications
■Specifications
Model NumberStandard KCX-B6 KCX-B6W
Retentive Memory Type KCX-B6M KCX-B6WM
Available number of Presets
Single Double
Digit 6 digits 6 digits
Count Input
Maximum counting speed10 Hz 20 kHz Changed by switch
Input resistancePositive logic input: 2.2 kΩ Negative logic input: 4.7 kΩ
Input voltage "L" 0 to 6 V, "H" 12 to 30 V
Disabled Count Input
Response timeOn delay: 25 μs or less Off delay: 25 μs or less
Input resistancePositive logic input: 2.2 kΩ Negative logic input: 4.7 kΩ
Input voltage "L" 0 to 6 V, "H" 12 to 30 V
External Reset Input
Response time On delay: 5 ms or less Off delay: 5 ms or less
Input resistancePositive logic input: 2.2 kΩ Negative logic input: 4.7 kΩ
Input voltage "L" 0 to 6 V, "H" 12 to 30 V
Automatic Reset Reset time 50 μs or less
Non-contact Output
Number of circuits 1 circuit 2 circuit
During output of positive logic
Voltage: 16 to 28 V (No-load voltage 28 V) Current: 15 mA or lower
During output of negative logic
Load voltage: 35 V or lower Load current: 30 mA or lower Residual voltage: 1.5 V or lower
Contact Output
Number of circuits 1 transfer contact (1c) 2 N.O. contact
Contact capacity 220 V AC 2A (Resistance load)
Electrical life 200,000 times or more (Resistance load)
Mechanical life 20 million times or more
Input/Output Response Time
Non-contact output10 Hz: Approx. 30 ms 20 kHz: Approx. 30 μs
Contact output10 Hz: Approx. 40 ms 20 kHz: Approx. 10 ms
Power Source Reset KCX-B6 KCX-B6W
Power supply shutdown time
500 ms or more
Reset time* 500 ms or more
Power Failure Memory Function KCX-B6M KCX-B6WM
EEPROM Number of overwrite cycles: 100,000 cycles or more
Storage time 10 years
Input gate response time when power failure occurs
20 to 500 ms
Input gate response time when the power returns
50 to 500 ms
Power Source for Sensor 24 V DC (20 to 28 V) 80 mA
Withstand Voltage 2 kV AC 1 min (Between AC power supply terminal, E terminal, and relay contact terminal)
Vibration ResistanceCompliant with JIS C 0911. Endurance vibration: Displacement amplitude 0.5 mm 10 to 55Hz, 3 axial directions Malfunction vibration: Displacement amplitude 0.35 mm 10 to 55Hz, 3 axial directions
Noise Resistance 1 μs width, square-wave pulse, 1 kV
Supply Voltage 90 to 132 V AC, 180 to 264 V 14 VA
Use Ambient Temperature
-10 to +50˚C
Storage Temperature -20 to +50˚C (Can be stored at -20 to +70˚C for about 1 week during transport)
Use / Storage Ambient Humidity
35 to 85% RH (No condensation)
Weight Approx. 0.5 kg
* Time until the counting is enabled after the power is turned on
518
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
■OperationVarious operation modes can be selected using the 4 DIP switches and the 10-poistion rotary switch on the back of the case.
Input Operation Switching (SW1 to 4)The 4 DIP switches are used for setting the input operation of the counter, enabling the switching of input speed, counting method, add-subtract mode, and logic.
Output Operation Switching (SW5)The 10-poisiton rotary switch is used for selecting the operation mode of the counter. By the operation of this switch, 6 output operations can be selected for the single preset type and 10 output operations can be selected for the double preset type.
《Operation chart》- Operation of the 0 position
- Operation of the 1 position
- Operation of the 2 position
- Operation of the 3 position
- Operation of the 4 position
- Operation of the 5 position
- Operation of the 6 position
- Operation of the 7 position
- Operation of the 8 position
- Operation of the 9 position
KCX-BOperation
1 2 3 4
SW4 SW5SW3SW2SW1
A
B
09
87
65
4
3 2
1
Switch Number Function Position Operation
1 Counting input speedA 10 Hz
B 20 kHz
2 Counting system
AIndividual increment and decrement input
B2-phase phase difference input
3 Counter operation modeA Decrement mode
B Increment mode
4 Input/Output logicA Negative logic
B Positive logic
PositionOUT1 OUT2
Counting Output Counting Output
0
Continuous
HoldingContinuous
Holding
1 50 to 1,000 ms2 Reset
3
100 msContinuous
Holding
4 50 to 1,000 ms5 Reset
6C≦P1
C≧P2
7 P1≦C≦P2
8 C≧P2 C<0
9 P1≦C≦P2 C≧P2
C: Discrete value P1: First set value P2: Second set value
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
50 to 1000 ms
Reset
Second Set Value
Increment Mode Decrement Mode
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
Reset
Second Set Value
First Set Value
Count Value 0
OUT1
OUT2
100 ms 100 ms
Counting Maximum Value(6 digits 999999)
Counting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode Decrement ModeCounting Maximum Value(6 digits 999999)
Increment Mode
position 0
position 1
position 2
position 3
position 4
position 5
position 6
position 7
position 8
position 9
Decrement Mode
Increment Mode Decrement Mode
Increment Mode Decrement Mode
Counting Maximum Value(6 digits 999999)
50 to 1000 ms
50 to 1000 ms50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
100 ms 100 ms
50 to 1000 ms 50 to 1000 ms
519
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
KCX-BConnection
■Terminal ConnectionsConnection of Counting Input1. In the case of a proximity sensor / photoelectronic sensor 《Negative logic》 The sensor output is an NPN open collector.
《Positive logic》 The sensor output is an PNP open collector.
2. Switch / relay 《Negative logic》
《Positive logic》
3. Rotary encoder When the TRD-J□-RZ is used, SW4 can be in either position A or position B.
■Terminal AssignmentKCX-B6/B6M
Terminal Number
Symbol Description
1 +24 V 80 mA Power source for sensor
2 IN A Count input A
3 IN B Count input B
4 E Input/Output minus common
5 IN H Disabled count input
6 (Not connected)
7 R External reset input
8 OUT Non-contact output
9 COM Contact output common
10 N.O. Contact output normally open
11 N.C. Contact output normally closed
12 180 to 264 V AC
Power source input 13 90 to 132 V AC
14 0 V AC
KCX-B6W/B6WM
Terminal Number
Symbol Description
1 +24 V 80 mA Power source for sensor
2 IN A Count input A
3 IN B Count input B
4 E Input/Output minus common
5 OUT1 First set non-contact output
6 OUT2 Second set non-contact output
7 R External reset input
8 IN H Disabled count input
9 COM Contact output common
10 N.O.1 First set contact output (N.O.)
11 N.O.2 Second set contact output (N.O.)
12 180 to 264 V AC
Power source input 13 90 to 132 V AC
14 0 V AC
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
520
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
Connection of a Counting Prohibit input1. KCX-B6/B6M 《Negative logic》
《Positive logic》
2. KCX-B6W/B6WM 《Negative logic》
《Positive logic》
Connection of the Reset Input 《Negative logic》
《Positive logic》
Connection of a Non-contact Output1. KCX-B6/B6M 《Negative logic》
《Positive logic》
2. KCX-B6W/B6WM 《Negative logic》
《Positive logic》
Connection of the Contact Output1. KCX-B6/B6M
2. KCX-B6W/B6WM
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
8
9
+24 V
INA
INB
E
SW1: BSW2: ASW4: A
SW1: BSW2: ASW4: B
SW1: ASW2: ASW4: A
SW1: BSW2: B
SW1: ASW2: ASW4: B
1 2 3 4For Increment
For Decrement
For Increment
For Decrement
2
1
3
4
+24 V
INA
INB
E
For Increment
For Decrement
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
For Increment
For Decrement
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4
+24 V
INA
INB
E
INH
COM
N.O.1
1
2
3
8
9
10
+24 V
INA
INB
INH
COM
N.O.1
1
2
3
8
9
10
41 2 3 4
SW4: B
NPN Open Collector or Contact Point
NPN Open Collector or Contact Point
E
R
INH
+24 V
RSW4: A
1 2 3 4 1 2 3 4
SW4: B
4
5
6
7
3
4
5
6
7
2
1
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 30 mARelay Drive Unusable
Power Source for LoadUp to 35 V
+24 V
INA
INB
E
COM
OUT1
2
3
8
9
4
Up to 15 mA16 to 28 V
Up to 30 mA
Up to 35 V
Up to 30 mA
Load
Load
Load
Load
E
N.O.1
N.O.2
3
4
5
6
2
1
E
N.O.1
N.O.2
3
4
5
6
2
1
Up to 15 mA
Up to 15 mA
Load
Load
220 V AC 2 A 220 V AC 2 A
COM
N.O.
N.C. 11
10
9
8
Power Source for Load
Load
Load11
10
9
8
Power Source for LoadCOM
N.O.1
N.O.2
Load
Load
KCX-BConnection
521
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
522
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
KCX-B6TFeatures
High Speed Increment-Decrement Total Counter- Maximum counting speed: for both 10 Hz and 20 kHz- The KCX-B6T is an increment-decrement type counter that enables
counting from positive range to the negative range. The total counter with green display can be used for displaying the current position for positioning devices.
- The KCX-B6T is equipped with counting inhibit input and reset button function inhibit input, and supports the input of both positive logic and negative logic.
■FeaturesHigh Speed Increment-Decrement Total Counter of 20 kHz ResponseThe KCX-B6T has high speed response, which is exceptional as a total counter. Since the counting speed can be switched to a low speed of 10 Hz, the counter can be used for a wide range of applications.
Counting Across from Positive Range to Negative Range is PossibleSince the KCX-B6T enables counting in the minus zone, it can display a range twice as large as counters that can count only in the plus zone.
Equipped with High Speed and Low Speed Reset InputThe two reset inputs operate in AND conditions. Therefore, for example, the counter does not require an external circuit even when performing origin correction at high speed by combining the origin pulse of a rotary encoder and the origin limit switch of a machine.
Equipped with a Dust Cover as a Standard FeatureAll models are equipped with the dust cover as a standard feature, and the reset button can be operated from outside the dust cover.
Supports 2-phase Phase Difference Input / Add-subtract Individual InputOther than rotary encoders, input devices such as proximity sensors and relay contacts can be used. In the case of add-subtract individual input, since both increment input and decrement input can be simultaneously input, the KCX-B6T can be applied to manage the quantity of workpieces on conveyers and the numbers of cars in parking lots.
Input Logic Switching Functions that Operate for All SensorsSince the input logic can be switched between positive logic and negative logic (only negative logic operation for low speed reset input), the KCX-B6T can use both PNP open collector output and NPN open collector output.
Dust Cover
Display the Number of Press
Limit Switch
Press
Rotary Encoder
Table Position Display
−999999 +999999
Plus ZoneMinus Zone 0
ContactInput
Non-contactInput
Positive Logic Negative Logic
IN
IN+24 V
E
E
IN
IN+24 V
E
EPNP Open Collector NPN Open Collector
A-phaseB-phaseCount Input
High Speed Reset InputLow Speed Reset Input
Z-phaseOrigin Limit
Proximity Sensor
Rotary Encoder
Dust Cover
Display the Number of Press
Limit Switch
Press
Rotary Encoder
Table Position Display
−999999 +999999
Plus ZoneMinus Zone 0
ContactInput
Non-contactInput
Positive Logic Negative Logic
IN
IN+24 V
E
E
IN
IN+24 V
E
EPNP Open Collector NPN Open Collector
A-phaseB-phaseCount Input
High Speed Reset InputLow Speed Reset Input
Z-phaseOrigin Limit
Proximity Sensor
Rotary Encoder
Dust Cover
Display the Number of Press
Limit Switch
Press
Rotary Encoder
Table Position Display
−999999 +999999
Plus ZoneMinus Zone 0
ContactInput
Non-contactInput
Positive Logic Negative Logic
IN
IN+24 V
E
E
IN
IN+24 V
E
EPNP Open Collector NPN Open Collector
A-phaseB-phaseCount Input
High Speed Reset InputLow Speed Reset Input
Z-phaseOrigin Limit
Proximity Sensor
Rotary Encoder
Dust Cover
Display the Number of Press
Limit Switch
Press
Rotary Encoder
Table Position Display
−999999 +999999
Plus ZoneMinus Zone 0
ContactInput
Non-contactInput
Positive Logic Negative Logic
IN
IN+24 V
E
E
IN
IN+24 V
E
EPNP Open Collector NPN Open Collector
A-phaseB-phaseCount Input
High Speed Reset InputLow Speed Reset Input
Z-phaseOrigin Limit
Proximity Sensor
Rotary Encoder
Dust Cover
Display the Number of Press
Limit Switch
Press
Rotary Encoder
Table Position Display
−999999 +999999
Plus ZoneMinus Zone 0
ContactInput
Non-contactInput
Positive Logic Negative Logic
IN
IN+24 V
E
E
IN
IN+24 V
E
EPNP Open Collector NPN Open Collector
A-phaseB-phaseCount Input
High Speed Reset InputLow Speed Reset Input
Z-phaseOrigin Limit
Proximity Sensor
Rotary Encoder
523
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
KCX-B6TSpecifications
■SpecificationsModel Number KCX-B6T
Digit 6 digits
Counting Range -999,999 to +999,999
Count Input
Maximum counting speed10 Hz 20 kHz Changed by switch
Input resistancePositive logic input: 2.2 kΩ Negative logic input: 3.3 kΩ
Input voltage "L" 0 to 6 V, "H" 16 to 30 V
Disabled Count Input
Response timeOn delay: 25 μs or less Off delay: 25 μs or less
Input resistancePositive logic input: 2.2 kΩ Negative logic input: 3.3 kΩ
Input voltage "L" 0 to 6 V, "H" 16 to 30 V
High Speed Reset Input
Response timeOn delay: 25 μs or less Off delay: 25 μs or less
Input resistancePositive logic input: 2.2 kΩ Negative logic input: 3.3 kΩ
Input voltage "L" 0 to 6 V, "H" 16 to 30 V
Low Speed Reset Input
Response timeOn delay: 50 ms or less Off delay: 50 ms or less
Input resistance Only negative logic input: 3.3 kΩ
Input voltage "L" 0 to 6 V, "H" 16 to 30 V
Manual Reset With the front button (Manual reset is prohibited by short-circuiting terminals ④ and ⑥.)
Retentive Feature for Power Failure
EEPROM Number of overwrite cycles: 100,000 cycles or more
Storage time 10 years
Input gate response time when power failure occurs
20 to 500 ms
Input gate response time when the power returns
50 to 500 ms
Power Source for Sensor 24 V DC (20 to 28 V) 80 mA
Withstand Voltage 2kV AC 1 min (Between AC power supply terminal and E terminal)
Vibration ResistanceCompliant with JIS C 0911. Endurance vibration: Displacement amplitude 0.5 mm 10 to 55 Hz, 3 axial directions Malfunction vibration: Displacement amplitude 0.35 mm 10 to 55 Hz, 3 axial directions
Noise Resistance 1 μs width, square-wave pulse, 1 kV
Supply Voltage 90 to 132 V AC, 180 to 264 V 14 VA
Use Ambient Temperature
-10 to +50˚C
Storage Temperature -20 to +50˚C (Can be stored at -20 to +70˚C for about 1 week during transport)
Use / Storage Ambient Humidity
35 to 85% RH (No condensation)
Weight (g) Approx. 350 g
524
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
■OperationVarious operation modes can be selected using the 4 DIP switches on the back of the case.
Input Operation Switching (SW1 to 4)The 4 DIP switches are used for setting the input operation of the counter, enabling the switching of input speed, counting method, and logic.
■Terminal AssignmentTerminal Number
Symbol Description
1 24 V DC 80 mA Power source for sensor
2 IN A Count input A
3 IN B Count input B
4 E Input common
5 IN H Disabled count input
6 RD Manual reset prohibition input
7 RH External reset input: High speed
8 RL External reset input: Low speed
9 (Not connected)
10 (Not connected)
11 (Not connected)
12 180 to 264 V AC
Power source input 13 90 to 132 V AC
14 0 V AC
Switch Number
Function Position Operation
1Counting input speed
IN AA 10 Hz
B 20 kHz
2Counting input speed
IN BA 10 Hz
B 20 kHz
3 Counting system
AAdd-subtract individual
input
B2-phase phase difference
input
4 Input logicA Negative logic
B Positive logic
1 2 3 4
SW1 SW2 SW3 SW4
A
B
KCX-B6TOperation
525
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
KCX-B6TConnection
■Terminal ConnectionsConnection of Counting Input1. In the case of a proximity sensor / photoelectronic sensor 《Negative logic》 The sensor output is an NPN open collector.
《Positive logic》 The sensor output is an PNP open collector.
2. Switch / relay 《Negative logic》
《Positive logic》
3. Rotary encoder When the TRD-J□-RZ is used, SW4 can be in either position A or position B.
Connection of a Counting Prohibit Input 《Negative logic》
《Positive logic》
Connection of the Reset Input 《Negative logic》
《Positive logic》
+24 V
INA
INB
E
SW1: BSW2: BSW3: ASW4: A
SW1: BSW2: BSW3: ASW4: B
SW1: ASW2: ASW3: ASW4: A
SW1: BSW2: BSW3: B
SW1: ASW2: ASW3: ASW4: B
1 2 3 4Adding
Subtracting
Adding
Subtracting
2
1
3
4
+24 V
INA
INB
E
Adding
Subtracting
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Adding
Subtracting
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4 1 2 3 4
SW4: BE
High Speed Reset Input
Low Speed Reset Input
+24 V
NPN Open Collector8
6
7
4
1
8
6
7
5
4 E
High Speed Reset Input
Low Speed Reset Input
+24 V
INA
INB
E
SW1: BSW2: BSW3: ASW4: A
SW1: BSW2: BSW3: ASW4: B
SW1: ASW2: ASW3: ASW4: A
SW1: BSW2: BSW3: B
SW1: ASW2: ASW3: ASW4: B
1 2 3 4Adding
Subtracting
Adding
Subtracting
2
1
3
4
+24 V
INA
INB
E
Adding
Subtracting
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Adding
Subtracting
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4 1 2 3 4
SW4: BE
High Speed Reset Input
Low Speed Reset Input
+24 V
NPN Open Collector8
6
7
4
1
8
6
7
5
4 E
High Speed Reset Input
Low Speed Reset Input
+24 V
INA
INB
E
SW1: BSW2: BSW3: ASW4: A
SW1: BSW2: BSW3: ASW4: B
SW1: ASW2: ASW3: ASW4: A
SW1: BSW2: BSW3: B
SW1: ASW2: ASW3: ASW4: B
1 2 3 4Adding
Subtracting
Adding
Subtracting
2
1
3
4
+24 V
INA
INB
E
Adding
Subtracting
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Adding
Subtracting
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4 1 2 3 4
SW4: BE
High Speed Reset Input
Low Speed Reset Input
+24 V
NPN Open Collector8
6
7
4
1
8
6
7
5
4 E
High Speed Reset Input
Low Speed Reset Input
+24 V
INA
INB
E
SW1: BSW2: BSW3: ASW4: A
SW1: BSW2: BSW3: ASW4: B
SW1: ASW2: ASW3: ASW4: A
SW1: BSW2: BSW3: B
SW1: ASW2: ASW3: ASW4: B
1 2 3 4Adding
Subtracting
Adding
Subtracting
2
1
3
4
+24 V
INA
INB
E
Adding
Subtracting
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Adding
Subtracting
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4 1 2 3 4
SW4: BE
High Speed Reset Input
Low Speed Reset Input
+24 V
NPN Open Collector8
6
7
4
1
8
6
7
5
4 E
High Speed Reset Input
Low Speed Reset Input
+24 V
INA
INB
E
SW1: BSW2: BSW3: ASW4: A
SW1: BSW2: BSW3: ASW4: B
SW1: ASW2: ASW3: ASW4: A
SW1: BSW2: BSW3: B
SW1: ASW2: ASW3: ASW4: B
1 2 3 4Adding
Subtracting
Adding
Subtracting
2
1
3
4
+24 V
INA
INB
E
Adding
Subtracting
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Adding
Subtracting
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4 1 2 3 4
SW4: BE
High Speed Reset Input
Low Speed Reset Input
+24 V
NPN Open Collector8
6
7
4
1
8
6
7
5
4 E
High Speed Reset Input
Low Speed Reset Input
+24 V
INA
INB
E
SW1: BSW2: BSW3: ASW4: A
SW1: BSW2: BSW3: ASW4: B
SW1: ASW2: ASW3: ASW4: A
SW1: BSW2: BSW3: B
SW1: ASW2: ASW3: ASW4: B
1 2 3 4Adding
Subtracting
Adding
Subtracting
2
1
3
4
+24 V
INA
INB
E
Adding
Subtracting
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Adding
Subtracting
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4 1 2 3 4
SW4: BE
High Speed Reset Input
Low Speed Reset Input
+24 V
NPN Open Collector8
6
7
4
1
8
6
7
5
4 E
High Speed Reset Input
Low Speed Reset Input
+24 V
INA
INB
E
SW1: BSW2: BSW3: ASW4: A
SW1: BSW2: BSW3: ASW4: B
SW1: ASW2: ASW3: ASW4: A
SW1: BSW2: BSW3: B
SW1: ASW2: ASW3: ASW4: B
1 2 3 4Adding
Subtracting
Adding
Subtracting
2
1
3
4
+24 V
INA
INB
E
Adding
Subtracting
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Adding
Subtracting
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4 1 2 3 4
SW4: BE
High Speed Reset Input
Low Speed Reset Input
+24 V
NPN Open Collector8
6
7
4
1
8
6
7
5
4 E
High Speed Reset Input
Low Speed Reset Input
+24 V
INA
INB
E
SW1: BSW2: BSW3: ASW4: A
SW1: BSW2: BSW3: ASW4: B
SW1: ASW2: ASW3: ASW4: A
SW1: BSW2: BSW3: B
SW1: ASW2: ASW3: ASW4: B
1 2 3 4Adding
Subtracting
Adding
Subtracting
2
1
3
4
+24 V
INA
INB
E
Adding
Subtracting
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Adding
Subtracting
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4 1 2 3 4
SW4: BE
High Speed Reset Input
Low Speed Reset Input
+24 V
NPN Open Collector8
6
7
4
1
8
6
7
5
4 E
High Speed Reset Input
Low Speed Reset Input
+24 V
INA
INB
E
SW1: BSW2: BSW3: ASW4: A
SW1: BSW2: BSW3: ASW4: B
SW1: ASW2: ASW3: ASW4: A
SW1: BSW2: BSW3: B
SW1: ASW2: ASW3: ASW4: B
1 2 3 4Adding
Subtracting
Adding
Subtracting
2
1
3
4
+24 V
INA
INB
E
Adding
Subtracting
2
1
3
4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Adding
Subtracting
+24 V
INA
INB
E
2
1
3
4
1 2 3 4 1 2 3 4
1 2 3 4
+24 V
INA
INB
E
2
1
3
4
Red
Green
White
Black
SW4: A
1 2 3 4
INB
E
INH
NPN Open Collector
NPN Open Collector
3
4
5
6
1 2 3 4
SW4: B
PNP Open Collector
PNP Open Collector
+24 V
INA
INB
E
INH
3
4
5
2
1
SW4: A
1 2 3 4 1 2 3 4
SW4: BE
High Speed Reset Input
Low Speed Reset Input
+24 V
NPN Open Collector8
6
7
4
1
8
6
7
5
4 E
High Speed Reset Input
Low Speed Reset Input
526
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
■ How to Change and Extend the Output Time (For the Operation of the A-type)
In the operation of the A-type (speci�c time output type), the output time can be changed in the range from approx. 50 to 1,000 ms using the volume on the front of the counter (on the back for the KCX-□W/□WM).
Turning the volume fully counterclockwise sets the minimum output t ime (approx. 50 ms). Conversely, turning the volume fully clockwise sets the maximum output time (Approx. 1,000 ms).
Moreover, in the case of the KCX single preset counter, if a capacitor is added between terminal ④ (E) and terminal ⑤ (CH1), the output time can be extended as shown in the table below.
■Changing the Operation ModeBefore changing the operation mode, turn the power off. And, after the power is turned off, add the reset input once. If the reset input is not added, the output may not be produced even if the set value is reached or the counter may count up at the set value that existed prior to the change or at a value irrelevant to the set value.
■Changing the Set ValueThe output may be produced if the set value is changed during counting. Therefore, before changing the set value, turn the power off and add the reset input. If the setting is changed during operation, the output may not be produced even if the set value is reached or the counter may count up at the set value that existed prior to the change or at a value irrelevant to the set value.
In the case of the KCX-□DM, KCX-□WM, KCX-B6M, and KCX-B6WM (equipped with a power failure memory function), the discrete values are memorized even if the set value is changed after the power is turned off. In this case, after the power is turned on, add the reset input once. If the reset input is not added, the output may not be produced even if the set value is reached or the counter may count up at the set value that existed prior to the change or at a value irrelevant to the set value.
"0" (zero) settingIn the case of a "0" setting (for example, "000" is set for 3 digits), because the counting operation and the output operation become stable, note the following points.- Although the output is not produced if the counting input is "L" or the reset
input is "H," the output may be produced in other cases.- If the reset input is "L" and the counting input is consecutively input, 0, 1,
2, and 3 appear as the counting (indicated value) in the B-type operation. This same operation may take place in A-type operation.
■Connection of the Power SupplyThe power transformer of the KCX series has a central voltage designed at 110/220 V. Therefore, do not make the connection as shown in the �gure below.《Wrong connection》
《Correct connection》
■Noise MeasuresReflecting studies into various noises based on proprietary test methods, Koyo Electronics' counters deliver performance that suf�ciently withstands noise in normal operation. However, to enhance the reliability further, observe the following precautions when using the counters.
1. When using a solenoid valve, clutch, or brake near the counter, in order to prevent the occurrence of noise, connect a surge absorption element of the series circuit that consists of a capacitor (�lm capacitor of 0.1 to 0.5 μF) and resistance (100 Ω 1/2 W) parallel to the driving coil.
2. When using the counter in places where a lot of noise is generated, in order to prevent malfunction, as, do not bundle the wire for the power source line (AC) and the input/output signal line of the counter with wire that contains the high current wire, and use shielded wire for the input/output signal line. Moreover, the shield jackets of all shielded wire should be connected to the E terminal of the counter.
When a sensor and the counter are mounted to separate frames, connect the frames with a thick conducting wire (0.5 mm2 or thicker).
Commonly Used in KCX SeriesThe correct way to use
50 ms 1000 ms
E
CH2
CH1+
−
(Counter)
4
5
6
50 ms 1000 ms
E
CH2
CH1+
−
(Counter)
4
5
6
Applied Electrolytic Condenser
Output Time
Variable Resistor Minimum
Variable Resistor Maximum
No Capacitor 50 ms to 1 s
2.2 μF 16 V 100 ms to 2 s
4.7 μF 16 V 150 ms to 3 s
10 μF 16 V 250 ms to 5 s
22 μF 16 V 500 ms to 10 s
C R
+12 V
EIN
(G)
Frame Earth
Frame BFrame A
(Connect Using ThickConducting Wire.)
Shielded Cable
R=100 Ω 1/2 WC=0.1 to 0.5 µF Capacitor
+12 V
EOUT
Sensor Counter
E E E
Counter Other Device (1) Other Device (2)
Frame Earth
Frame
Other Ground for Large Current
ElectromagneticContactor
470 Ω 1/2 W
+12 V
IN
E
C R
+12 V
EIN
(G)
Frame Earth
Frame BFrame A
(Connect Using ThickConducting Wire.)
Shielded Cable
R=100 Ω 1/2 WC=0.1 to 0.5 µF Capacitor
+12 V
EOUT
Sensor Counter
E E E
Counter Other Device (1) Other Device (2)
Frame Earth
Frame
Other Ground for Large Current
ElectromagneticContactor
470 Ω 1/2 W
+12 V
IN
E
KCX
90 to 132 V AC
0 V
100 V AC
0 V
* Counter except KCX
KCX
*
180 to 264 V AC
90 to 132 V AC
0 V
200/220 V AC
100 V AC
0 V
*
KCX
180 to 264 V AC
0 V
200/220 V AC
0 V*
KCX
90 to 132 V AC
0 V
100 V AC
0 V
* Counter except KCX
KCX
*
180 to 264 V AC
90 to 132 V AC
0 V
200/220 V AC
100 V AC
0 V
*
KCX
180 to 264 V AC
0 V
200/220 V AC
0 V*
527
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.
For the latest information, contact our sales persons or see our website.
KCV
KCX
KCM
3. Connect the E terminal of the counter to the frame over the shortest distance.
When the counter uses a common ground with other devices, make the ground line as short and thick as possible, and connect the only one ground to the frame. Also, separate the ground line of the counter from other ground lines in which high current �ows.
4. When adding a contact signal such as an electromagnetic relay to the counting input terminal for low speed, inserting a resistor (470Ω1/2W) between the counting input and ground prevents malfunctions by contact failure, and enhances reliability further.
■PrecautionsCautions Concerning the Output Relay ContactAs the load of the counter, inductive loads such as electromagnetic switches, control relays, AC solenoids, and solenoid valves are normally connected. The higher the current and the working voltage that �ow through the output contact point of the counterworking voltage, the shorter the life of the output contact point built into the counter. The trend is as shown in the �gure below.The curves in the figure below show the degree of erosion of the contact point, indicating that if the current and voltage become lower, the life becomes longer. Namely, if the working voltage and current become lower, the erosion of the contact point becomes smaller and the life of the contact point becomes longer.
- Life curve of relay (Equivalent to the NT type made by Matsushita)
Meanwhile, when carbide is generated on the surface of the contact point by glow discharge that occurs when the inductive load is opened/closed, the contact point produces adverse effects such as higher contact resistance. When the current that �ows through the contact point is large, the electric discharge becomes the arc discharge and blows off the carbide that occurs when the contact point is opened/closed. As a result, clean metal is always exposed on the surface of the contact point and the contact resistance is maintained at a stable low value. However, when little current �ow through the contact point and, in particular, the working voltage is low, the discharge to be generated when the contact point is opened/closed becomes only glow discharge. In this case, carbide is generated and adheres to the surface of the contact point, and the surface cleaning effect is lost. As a result, contact failure occurs at a number of opening/closing cycles that is much lower than the number estimated from the life curve in the �gure above. Therefore, if an inductive load is used at low voltage and low current, unless the occurrence of glow discharge is prevented, the contact point incurs a contact failure at one-tenth to one-hundredth of the life estimated from the �gure above.As glow discharge preventive measures, as shown in the �gure below, surge voltage should be absorbed by using a CR-type surge absorption element or varistor in parallel with the load or a diode in the case of a DC load.
- Surge absorption circuit
- The indication of a relay contact capacity of 3 A and 5 A, etc. is for the case of a resistance load. In the case of an inductive load, the capacity increases by 10 to 20%. Moreover, if the load is reduced, the life of the contact point becomes longer accordingly.
- Note that a non-contact output when the power is supplied (within 200 ms) or the power is shut down is unstable (neither 1 nor 0) for both the power failure memory type and the normal type.
- Some models with numerical displays partially show numbers in different shapes as shown below, but this is not trouble.
Commonly Used in KCX SeriesPrecautions
C R
+12 V
EIN
(G)
Frame Earth
Frame BFrame A
(Connect Using ThickConducting Wire.)
Shielded Cable
R=100 Ω 1/2 WC=0.1 to 0.5 µF Capacitor
+12 V
EOUT
Sensor Counter
E E E
Counter Other Device (1) Other Device (2)
Frame Earth
Frame
Other Ground for Large Current
ElectromagneticContactor
470 Ω 1/2 W
+12 V
IN
E
C R
+12 V
EIN
(G)
Frame Earth
Frame BFrame A
(Connect Using ThickConducting Wire.)
Shielded Cable
R=100 Ω 1/2 WC=0.1 to 0.5 µF Capacitor
+12 V
EOUT
Sensor Counter
E E E
Counter Other Device (1) Other Device (2)
Frame Earth
Frame
Other Ground for Large Current
ElectromagneticContactor
470 Ω 1/2 W
+12 V
IN
E
1000
500
100
50
10
Mechanical Life
250 V AC: Resistance Load
24 V DC: Resistance Load
250 V AC: Coil Load
24 V DC: Coil Load
0 1 2 3
Life (10,000 Cycles)
Load Current (A)
(Note) Under load conditions specified in JEM 1230 (1976)
R
LoadLoad
Load
Counter Contact Point
264 V AC or lower
Counter Contact Point
264 V AC or lower
Counter Contact Point
10E-2(IR)
W06C (Hitachi)
Z : ZNR (Panasonic) ERZC05DK391 TNR (Marukon) TNR9G431K
R
R
1000
500
100
50
10
Mechanical Life
250 V AC: Resistance Load
24 V DC: Resistance Load
250 V AC: Coil Load
24 V DC: Coil Load
0 1 2 3
Life (10,000 Cycles)
Load Current (A)
(Note) Under load conditions specified in JEM 1230 (1976)
R
LoadLoad
Load
Counter Contact Point
264 V AC or lower
Counter Contact Point
264 V AC or lower
Counter Contact Point
10E-2(IR)
W06C (Hitachi)
Z : ZNR (Panasonic) ERZC05DK391 TNR (Marukon) TNR9G431K
R
R
KCX-1D/2D/3D/4D KCX-B/KCX-B□T
Models with a Numerical Display Except Those on the Left
528
Electronic Counter
Tachometer
Digital Timer
Programmable Cam
Electronic Counter / Controller
SENSOR
ENCODER
COUNTER
INFORMATION
H M I
P L C
Visit our website ▼http://www.koyoele.co.jp/english/
KOYO ELECTRONICS INDUSTRIES CO., LTD.
GENERAL CATALOG 2014 Latest catalog (free) is available online.
KCV
KCX
KCM
■Dimensions (Unit: mm)
■Cautions for Installation- The dedicated stand F (KF-03) and stand B (KB-03) are provided with screws required for mounting.- In the case of the KA-01 dedicated connector kit and KB-03 stand B, if using screws other than those provided, use screws of the length shown below. For connector (KA-01) … 12 mm or less For stand B (KB-03) …… 30 mm or less If screws of a length longer than the that mentioned above are used, they may damage the element in the counter.
Attachment Panel-cut Dimensions
Commonly Used in KCX SeriesDimensions
72
75*
72 75*
94.59
15*
(118.5)
61
38 1.5
18 2110
±0.
2
57±0.27 5 46 13 2
14 12 1113 810 9
Hol
e 2−φ
4.5
84
72 20 22
2-M4
60 ± 0.2
72
8468
+0.
7−
0
68 +0.7−0
60±0.2
68+
0.7
−0
68 +0.7−0
94 o
r le
ss
75 or less
Square Hole
Dust Cover 1 to 5: Thickness of the Panel in the Case of Embedded Installation
F Stand, B Stand
Mounting Bracket(Screw Tightening Torque of 0.4 Nm or less)
* Dimensions When the Dust Cover is Attached
- KA-01 Dedicated Connector - Stand F: KF-03 (For Stationary Installation)
- Stand B: KB-03 (For Embedded Installation) (The Outside Dimensions are the Same as the KF-03.)- The KA-01, KF-03, and KB-03 are Sold Separately
- Panel-cut Dimensions for Embedded Installation
- Bore Drilling Dimensions for Stationary Installation Using a Dedicated Socket (Stand F)
Stand F Panel-cut Dimensions for Embedded Installation
72
75*
72 75*
94.59
15*
(118.5)
61
38 1.5
18 2110
±0.
2
57±0.27 5 46 13 2
14 12 1113 810 9
Hol
e 2−φ
4.5
84
72 20 22
2-M4
60 ± 0.2
72
8468
+0.
7−
0
68 +0.7−0
60±0.2
68+
0.7
−0
68 +0.7−0
94 o
r le
ss
75 or less
Square Hole
Dust Cover 1 to 5: Thickness of the Panel in the Case of Embedded Installation
F Stand, B Stand
Mounting Bracket(Screw Tightening Torque of 0.4 Nm or less)
* Dimensions When the Dust Cover is Attached
- KA-01 Dedicated Connector - Stand F: KF-03 (For Stationary Installation)
- Stand B: KB-03 (For Embedded Installation) (The Outside Dimensions are the Same as the KF-03.)- The KA-01, KF-03, and KB-03 are Sold Separately
- Panel-cut Dimensions for Embedded Installation
- Bore Drilling Dimensions for Stationary Installation Using a Dedicated Socket (Stand F)
Stand F Panel-cut Dimensions for Embedded Installation