Katalog 1 EN - Hansa-Flex · 2009-03-16 · PKN 110 10 6 3/8“ 22,0 14,5 33,0 PKN 113 12 8 1/2“...
Transcript of Katalog 1 EN - Hansa-Flex · 2009-03-16 · PKN 110 10 6 3/8“ 22,0 14,5 33,0 PKN 113 12 8 1/2“...
Edition: 02/2008 Catalogue 1 497
5
Hose mounts
Hose mounts
Edition: 02/2008Catalogue 1498
5
Hose mounts Note
All the information in this catalogue is based on the standards applicable at the time of publication and the regu-
lations of the employers‘ liability insurance associations. Product safety can only be guaranteed if our assembly
instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety
of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our
products are constantly being updated, technical modifications are possible.
While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions
and accept no liability for the information it contains.
® 2008 HANSA-FLEX Hydraulik GmbH – www.hansa-flex.com
Edition: 02/2008 Catalogue 1 499
5
Hose mounts Skive ferrules
for TE, KP, HD 100 to HD 400 group hoses
PHD 100 Swage ferrule for braided hoses Mount type: Skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Item description: - for: 1SN (HD 100, HD 100T, HF 100, HW 100)
- for: 2SC (KP 200, KP 200 PRO)
Note: The mount assignment depends on the hose type.
The processing dimensions are to be taken from our current press dimension table.
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHD 104 5 3 3/16“ 17,0 8,5 26,0
PHD 106 6 4 1/4“ 20,0 10,9 31,0
PHD 108 8 5 5/16“ 21,0 12,8 31,0
PHD 110 10 6 3/8“ 24,0 14,0 31,0
PHD 113 12 8 1/2“ 28,0 18,3 35,0
PHD 116 16 10 5/8“ 31,0 21,8 36,0
PHD 120 19 12 3/4“ 35,0 24,8 42,5
PHD 125 25 16 1“ 42,0 30,5 50,5
PHD 132 31 20 1.1/4“ 52,0 37,7 59,0
PHD 140 38 24 1.1/2“ 58,0 44,2 63,0
PHD 150 51 32 2“ 62,0 57,2 70,0
Other product versions (on CD or online): PHD 100 VA: stainless steel
Edition: 02/2008Catalogue 1500
5
Hose mounts Skive ferrules
for TE, KP, HD 100 to HD 400 group hoses
PHD 200 Swage ferrule for braided hoses Mount type: Skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Item description: - for: 2SN (HD 200, HD 200 T, HF 200, HW 200, HDB 200)
- for: 4SP (HD 400)
Note: The mount assignment depends on the hose type.
The processing dimensions are to be taken from our current press dimension table.
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHD 204 5 3 3/16“ 21,0 8,5 26,0
PHD 206 6 4 1/4“ 22,0 11,4 30,0
PHD 208 8 5 5/16“ 23,0 12,5 30,0
PHD 210 10 6 3/8“ 26,0 14,5 31,0
PHD 213 12 8 1/2“ 30,0 18,3 32,0
PHD 216 16 10 5/8“ 33,0 21,6 36,0
PHD 220 19 12 3/4“ 38,0 24,4 42,5
PHD 225 25 16 1“ 46,0 30,5 51,0
PHD 232 31 20 1.1/4“ 57,0 38,0 58,0
PHD 240 38 24 1.1/2“ 65,0 44,3 62,0
PHD 250 51 32 2“ 79,0 57,0 73,5
PHD 260 60 38 2.3/8“ 84,0 67,1 79,0
PHD 276 75 48 3“ 105,0 81,8 80,0
Other product versions (on CD or online): PHD 200 VA: stainless steel
Edition: 02/2008 Catalogue 1 501
5
Hose mounts Skive ferrules
for TE, KP, HD 100 to HD 400 group hoses
PHD 400 VA Swage ferrule for hose HD 400 Mount type: Skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D1
D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHD 406 VA 6 4 1/4“ 22,0 10,3 34,5
Edition: 02/2008Catalogue 1502
5
Hose mounts Skive ferrules
for TE, KP, HD 100 to HD 400 group hoses
PKP 100 Swage ferrule for braided hoses Mount type: Skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Item description: - for: 1SC (KP 100 KP, KP 100 P)
Note: The mount assignment depends on the hose type.
The processing dimensions are to be taken from our current press dimension table.
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PKP 106 6 4 1/4“ 19,0 11,0 27,3
PKP 108 8 5 5/16“ 20,6 12,6 30,2
PKP 110 10 6 3/8“ 23,6 14,1 30,2
PKP 113 12 8 1/2“ 25,2 17,6 32,1
PKP 116 16 10 5/8“ 30,0 21,6 34,0
PKP 120 19 12 3/4“ 33,0 24,6 36,8
Edition: 02/2008 Catalogue 1 503
5
Hose mounts Non-skive ferrules
for TE, KP, HD 100 to HD 400 group hoses
PHN 200 Swage ferrule for braided hoses Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Item description:
- for: 1SN (HD 100, HD 100 T, HF 100, HW 100)
- for: 2SN (HD 200, HD 200 T, HF 200, HW 200, HDB 200)
Note: The mount assignment depends on the hose type.
The processing dimensions are to be taken from our current press dimension table.
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHN 204 5 3 3/16“ 21,0 9,5 23,5
PHN 206 6 4 1/4“ 23,0 11,4 30,0
PHN 208 8 5 5/16“ 24,0 13,2 30,0
PHN 210 10 6 3/8“ 26,0 14,5 31,0
PHN 213 12 8 1/2“ 29,0 18,3 32,0
PHN 216 16 10 5/8“ 33,0 21,6 36,0
PHN 220 19 12 3/4“ 37,0 24,4 42,5
PHN 225 25 16 1“ 46,0 31,0 51,0
PHN 232 31 20 1.1/4“ 59,0 38,3 57,5
PHN 240 38 24 1.1/2“ 67,0 44,0 60,5
PHN 250 51 32 2“ 80,0 57,0 74,0
Other product versions (on CD or online): PHN 200 VA: stainless steel
Edition: 02/2008Catalogue 1504
5
Hose mounts Non-skive ferrules
for TE, KP, HD 100 to HD 400 group hoses
PHD 100 VA Swage ferrule for braided hoses Mount type: Non-skive ferrule
Material: Stainless steel
Item description: - for: 1SN (HD 100, HD 100 T)
- for: 2SC (KP 200, KP 200 PRO)
Note: The mount assignment depends on the hose type.
The processing dimensions are to be taken from our current press dimension table.
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHD 106 VA 6 4 1/4“ 20,0 10,3 34,5
PHD 108 VA 8 5 5/16“ 22,0 12,0 34,5
PHD 110 VA 10 6 3/8“ 25,0 14,0 35,0
PHD 113 VA 12 8 1/2“ 28,0 17,2 37,0
PHD 116 VA 16 10 5/8“ 32,0 20,2 40,0
PHD 120 VA 19 12 3/4“ 36,0 24,2 45,0
PHD 125 VA 25 16 1“ 45,0 31,5 50,0
PHD 132 VA 31 20 1.1/4“ 55,0 37,7 70,0
PHD 140 VA 38 24 1.1/2“ 60,0 45,1 70,0
PHD 150 VA 51 32 2“ 76,0 57,7 80,0
Edition: 02/2008 Catalogue 1 505
5
Hose mounts Non-skive ferrules
for TE, KP, HD 100 to HD 400 group hoses
PKN 100 Swage ferrule for braided hoses Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Item description: - for: 1SC (KP 100 KP, KP 100 P)
Note: The mount assignment depends on the hose type.
The processing dimensions are to be taken from our current press dimension table.
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PKN 106 6 4 1/4“ 18,0 11,2 30,5
PKN 108 8 5 5/16“ 19,0 12,7 32,0
PKN 110 10 6 3/8“ 22,0 14,5 33,0
PKN 113 12 8 1/2“ 26,0 18,3 34,0
Edition: 02/2008Catalogue 1506
5
Hose mounts Non-skive ferrules
for TE, KP, HD 100 to HD 400 group hoses
PHT 200 Swage ferrule for hose TE 200 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Note: The mount assignment depends on the hose type.
The processing dimensions are to be taken from our current press dimension table.
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHT 204 5 3 3/16“ 17,0 9,8 27,3
PHT 06 6 4 1/4“ 19,0 11,6 28,0
PHT 08 8 5 5/16“ 22,3 12,6 30,2
PHT 10 10 6 3/8“ 23,0 14,9 29,5
PHT 13 12 8 1/2“ 27,0 18,5 31,0
PHT 16 16 10 5/8“ 32,0 21,8 33,0
PHT 20 19 12 3/4“ 35,0 24,6 37,5
PHT 25 25 16 1“ 42,0 30,8 45,5
PHT 32 31 20 1.1/4“ 48,0 37,9 55,0
Other product versions (on CD or online): PHD 100 VA: stainless steel
Edition: 02/2008 Catalogue 1 507
5
Hose mounts Non-skive ferrules
for TE, KP, HD 100 to HD 400 group hoses
PHT 300 Swage ferrule for hose TE 300 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Note: The mount assignment depends on the hose type.
The processing dimensions are to be taken from our current press dimension table.
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHT 304 5 3 3/16“ 18,6 9,8 27,3
PHT 06 6 4 1/4“ 19,0 11,6 28,0
PHT 08 8 5 5/16“ 22,3 12,6 30,2
PHT 10 10 6 3/8“ 23,0 14,9 29,5
PHT 13 12 8 1/2“ 27,0 18,5 31,0
PHT 16 16 10 5/8“ 32,0 21,8 33,0
PHT 20 19 12 3/4“ 35,0 24,6 37,5
PHT 25 25 16 1“ 42,0 30,8 45,5
PHT 32 31 20 1.1/4“ 48,0 37,9 55,0
PHT 40 38 24 1.1/2“ 57,2 44,2 63,2
PHT 50 51 32 2“ 75,9 56,8 78,5
Other product versions (on CD or online): PHT 300 VA: stainless steel
Edition: 02/2008Catalogue 1508
5
Hose mounts
for NY hoses
PHY 100 Swage ferrule for hose NY 100 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Note: The processing dimensions are to be taken from our current press dimension table.
LF
D3D1
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHY 104 5 2 3/16“ 16,0 9,5 28,0
PHY 106 6 4 1/4“ 19,0 11,6 29,5
PHY 108 8 5 5/16“ 22,0 12,7 29,5
PHY 110 10 6 3/8“ 23,0 14,3 32,5
PHY 113 12 8 1/2“ 26,0 18,6 34,0
PHY 116 16 10 5/8“ 30,0 22,0 36,5
PHY 120 19 12 3/4“ 33,0 25,7 41,0
PHY 125 25 16 1“ 40,0 31,8 41,0
Edition: 02/2008 Catalogue 1 509
5
Hose mounts
for NY hoses
PHY 300 Swage ferrule for hose NY 300 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
LF
D3D1
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHY 306 6 4 1/4“ 18,0 11,3 43,0
PHY 308 8 5 5/16“ 20,0 11,3 40,0
PHY 310 10 6 3/8“ 23,0 13,7 47,0
PHY 313 12 8 1/2“ 29,0 16,6 50,0
PHY 316 16 10 5/8“ 32,0 19,9 60,0
PHY 320 19 12 3/4“ 37,0 24,5 60,0
PHY 325 25 16 1“ 42,0 29,5 60,0
Edition: 02/2008Catalogue 1510
5
Hose mounts
for NY hoses
PHY 700 N Swage ferrule for hose NY 700 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHY 704 N 5 3 3/16“ 15,0 9,5 29,0
PHY 706 N 6 4 1/4“ 18,0 10,8 31,0
PHY 708 N 8 5 5/16“ 20,0 12,5 31,0
PHY 710 N 10 6 3/8“ 22,0 14,6 33,2
PHY 713 N 12 8 1/2“ 27,0 18,3 37,0
PHY 716 N 16 10 5/8“ 31,6 21,7 36,8
PHY 720 N 19 12 3/4“ 36,4 24,7 42,5
PHY 725 N 25 16 1“ 42,7 30,5 50,5
Other product versions (on CD or online): PHY 700 VA: stainless steel
Edition: 02/2008 Catalogue 1 511
5
Hose mounts
for NY hoses
PHY 800 N Swage ferrule for hose NY 800 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHY 804 N 5 3 3/16“ 15,0 9,5 29,0
PHY 806 N 6 4 1/4“ 19,0 11,9 31,0
PHY 808 N 8 5 5/16“ 21,0 12,7 31,0
PHY 810 N 10 6 3/8“ 23,0 14,8 33,0
PHY 813 N 12 8 1/2“ 27,0 18,3 37,0
Edition: 02/2008Catalogue 1512
5
Hose mounts
for NY hoses
PHY 2100 Swage ferrule for hose NY 2100 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D1
LF
D3D6
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
D6
mm
LF
mm
PHY 2106 6 4 1/4“ 20,5 9,2 22,0 43,0
Edition: 02/2008 Catalogue 1 513
5
Hose mounts
for SG hoses
PSGB 100 Swage ferrule for hose SGB 100 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D1
D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PSGB 120 19 12 3/4“ 42,0 29,0 35,0
PSGB 125 25 16 1“ 48,0 35,0 44,0
PSGB 132 31 20 1.1/4“ 55.0 39,8 58.5
PSGB 140 38 24 1.1/2“ 65,0 45,8 63,0
PSGB 150 51 32 2“ 75,0 59,8 78,0
PSGB 160 60 38 2.3/8“ 85,0 67,1 79,0
Edition: 02/2008Catalogue 1514
5
Hose mounts
for SI hoses
SIH 100 - 700 Swage ferrule for SI and textile hoses Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D3D1
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
SIH 103 3 - - 10,0 6,5 17,0
SIH 104 5 3 3/16“ 12,0 7,5 20,0
SIH 106 6 4 1/4“ 13,5 10,0 20,0
SIH 108 8 5 5/16“ 16,0 11,7 20,0
SIH 110 10 6 3/8“ 19,0 13,8 26,0
SIH 113 12 8 1/2“ 24,5 17,0 33,0
SIH 116 16 10 5/8“ 28,0 20,5 34,0
SIH 204 5 3 3/16“ 12,0 7,5 17,0
SIH 206 6 4 1/4“ 13,5 10,0 20,0
SIH 304 5 3 3/16“ 13,5 7,5 20,0
SIH 306 6 4 1/4“ 15,0 10,0 20,0
SIH 308 8 5 5/16“ 17,0 11,7 21,0
SIH 310 10 6 3/8“ 22,0 15,6 32,0
SIH 404 5 3 3/16“ 13,5 7,5 20,0
SIH 406 6 4 1/4“ 17,0 11,7 21,0
SIH 408 8 5 5/16“ 18,0 13,8 21,0
SIH 410 10 6 3/8“ 22,0 15,6 32,0
SIH 413 12 8 1/2“ 26,5 19,5 33,0
SIH 504 5 3 3/16“ 9,0 5,5 17,0
SIH 510 10 6 3/8“ 11,7 15,0 20,0
SIH 513 12 8 1/2“ 13,8 18,0 21,0
SIH 605 5 3 3/16“ 11,0 6,5 17,0
SIH 606 6 4 1/4“ 13,5 7,5 20,0
SIH 613 12 8 1/2“ 22,0 15,6 32,0
SIH 706 6 4 1/4“ 15,0 7,5 20,0
SIH 713 12 8 1/2“ 23,0 17,0 32,0
Edition: 02/2008 Catalogue 1 515
5
* Width across fl ats
Hose mounts
for TAF 100 hoses
AFH 100 Screw mount for hose TAF 100 Mount type: Screw mount
Material: Steel
Surface protection: electro galvanised,
yellow chromized
SWD2
LF
Designation
DN
mm
Size
Inch
D2
mm
LF
mm
SW*
mm
AFH 104 5 3 3/16“ 7,9 25,0 12
AFH 106 6 4 1/4“ 11,0 36,0 17
AFH 108 8 5 5/16“ 13,0 38,0 19
AFH 110 10 6 3/8“ 15,5 44,5 22
AFH 113 12 8 1/2“ 20,1 51,0 27
Edition: 02/2008Catalogue 1516
5
* Width across fl ats
Hose mounts
for TBF 200 hoses
BFH 200 Screw mount for hose TBF 200 Mount type: Screw mount
Material: Steel
Surface protection: electro galvanised,
yellow chromized
SWD2
LF
Designation
DN
mm
Size
Inch
D2
mm
LF
mm
SW*
mm
BFH 204 5 3 3/16“ 8,8 25,0 12
BFH 206 6 4 1/4“ 12,4 36,0 17
BFH 208 8 5 5/16“ 14,0 38,0 19
BFH 210 10 6 3/8“ 17,5 44,5 22
BFH 213 12 8 1/2“ 21,0 51,0 27
BFH 220 19 12 3/4“ 26,5 57,0 30
Edition: 02/2008 Catalogue 1 517
5
Hose mounts
for TF hoses
PHF 100 Swage ferrule for hose TF 100 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHF 104 5 3 3/16“ 13,0 8,3 30,0
PHF 106 6 4 1/4“ 15,0 10,6 32,0
PHF 108 8 5 5/16“ 17,0 12,2 33,0
PHF 110 10 6 3/8“ 19,0 13,7 33,0
PHF 113 12 8 1/2“ 24,0 18,0 37,0
PHF 116 16 10 5/8“ 27,0 21,5 37,0
PHF 120 19 12 3/4“ 32,0 25,0 41,0
PHF 125 25 16 1“ 38,0 31,0 41,0
Other product versions (on CD or online): PHF 100 VA: stainless steel
Edition: 02/2008Catalogue 1518
5
Hose mounts
for TF hoses
PHF 200 Swage ferrule for hose TF 200 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PHF 206 6 4 1/4“ 16,0 10,6 33,0
PHF 208 8 5 5/16“ 19,0 12,3 33,0
PHF 210 10 6 3/8“ 21,0 13,7 35,0
PHF 213 12 8 1/2“ 26,0 18,5 37,0
PHF 216 16 10 5/8“ 27,0 21,5 37,0
PHF 220 19 12 3/4“ 32,0 25,0 41,0
PHF 225 25 16 1“ 38,0 31,0 41,0
Edition: 02/2008 Catalogue 1 519
5
Hose mounts
for HM hoses (measuring technology)
PMH 100 Swage ferrule for hose HM 102 Mount type: Non-skive ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D1D3
LF
Designation
DN
mm
Size
Inch
D1
mm
D3
mm
LF
mm
PMH 102 2 1,2 5/64“ 8,0 4,8 15,3
Edition: 02/2008Catalogue 1520
5
Hose mounts