TEC

HN

ICA

L D

ATA

LSA-PLUS

Edge Connector

Description

The Edge Connector portfolio has been designed specifically for use in telecommunication circuits wherever high density connectivity is required between a Printed Circuit Board and cable wires. The Edge Connector (EC) plugs directly onto a Printed Circuit Board (PCB) to connect a cable harness or individual wires. The cable wires are connected using the tried and tested LSA-PLUS contacts. Wire guide loops ensure orderly routing of the wires, making cable management simple and more effective. An overview of the variety of sizes, pair counts and connection types is given in the table below.

Features and Benefits

Highest contact quality

Space saving

Available in a variety of sizes for different pair counts

Compatible with LSA-PLUS insertion tool

Fast Termination

Over voltage protection option for 20 pole

Accessories available

Technical AssistanceEurope & Middle East +32 2 712 6542 euro.tac@adckrone.com

www.adckrone.com

EC Type Pair counts / add contact Connection Disconnection Required PCB thickness

EC 25 24 / 1 1.2mm 0.2mmEC 20 20 / 0 - 1.5mm 0.13mmEC 17 16 / 1 1.2mm 0.2mmEC 17 16 / 1 - 1.5mm 0.13mmEC 14 14 / 0 - 1.5mm 0.13mm

Installation

Whether in industrial electronics, regulation or control technology, telemetry or input circuits of PBX systems, the LSA-PLUS Edge Connector can be effectively used in all applications where cable wires with a conductor diameter of 0.4mm to 0.6 mm are directly connected to printed circuit boards.

07

/0

7

30

02

10

BE

LS

A-P

LUS

E

dg

e C

on

nec

tor

w w w . a d c k r o n e . c o m + 4 9 - 3 0 - 8 4 5 3 - 1 8 1 8 + 4 9 - 3 0 - 8 4 5 3 - 1 7 0 3

Product SpecificationsELECTRICAL CHARACTERISTICS

Insulation resistance >5x104M @ 500V Contact resistance LSA-PLUS contact 2.5m PCB contact 5m Disconnection contact 2.5m Operating circuits TNV1 up to TNV3, RFC up to 320V

Electrical strength 2kVeff

Surge voltage strength (1.2/50s) 3.6kV

Current-carrying capacity 1.3A / each contact (max. rated current in telecommunication networks)

Impulse current (8/20 s) LSA-PLUS Contact 5kA PCB contact 5kA Disconnection contact 0.5kA

TEMPERATURE CHARACTERISTICS

Operating temperature -20C to +60C

Storage temperature -40C to +70C

ENVIRONMENTAL CHARACTERISTICS

Relative humidity 95%; no water condensation, no ice

Sinusoidal vibration In accordance with

IEC 60068-2-6 IEC 60068-2-1 (cold), IEC 60068-2-2 (dry heat) IEC 60068-2-78 (damp heat, steady state)

MECHANICAL CHARACTERISTICS

Single solid conductor 0.4 0.63mm (AWG26AWG22) or

Tin coated copper strands 7x0.15 ... 0.25mm (AWG26AWG22)

Wire outer diameter 0.7 1.1mm with PE or PVC solid insulation

Number of reterminations 50 times

Contact surface LSA-PLUS contact Cu/Sn Disconnection contact Au

Insertion force per contact approx. 5.5N (depends on PCB tolerance)

Withdrawal force per contact approx. 2.5N (depends on PCB tolerance)

RoHS In accordance with European Directive 2002/96/EG

Plastics PC/ABS

Plastics flammability class: UL94V-0

LSA-PLUSEdge Connector

07

/0

7

30

02

10

BE

LS

A-P

LUS

E

dg

e C

on

nec

tor

3w w w . a d c k r o n e . c o m + 4 9 - 3 0 - 8 4 5 3 - 1 8 1 8 + 4 9 - 3 0 - 8 4 5 3 - 1 7 0 3

LSA-PLUSEdge Connector

EC Type A [mm] B [mm] Remarks

EC 25 76.2 0.1 72.0 0.1

Strip lines on both sides of the PCBEC 20 61.2 0.1 57.0 0.1

EC 17 52.2 0.1 48.0 0.1

EC 14 43,2 0,1 39,0 0,1

Printed circuit board characteristics

Thickness 1.2mm 0.12mm 1.5mm 0.13mm

Contact area tin-plated

Coating thickness of strip lines 5m (minimum)

Strip lines on both sides of the PCB

Frequency of connection of EC onto PCB 5 times

Dimensions, in mm

Dimensions, in mm

TEC

HN

ICA

L D

ATA

Web Site: www.adckrone.com

EMEA Office: ADC GmbH, Beeskowdamm, 3-11, 14167 Berlin, Germany Phone: +49 30 8453-1818 Fax: +49 30 8453-1703. For a listing of all ADC KRONEs global sales office locations, please refer to our web site.

UK Office: ADC Communications (UK) Ltd., Runnings Road, Kingsditch Trading Estate, Cheltenham, Gloucestershire GL51 9NQ, United Kingdom Phone: +44 (0) 1242 264 400 Fax: +44 (0) 1242 264 488 contactuk@adckrone.com

Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC KRONE reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting ADC GmbH headquarters in Berlin. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents.

Part Number 300210BE Jul 07 Original 2007 ADC Telecommunications Inc. All Rights Reserved

O r d e r i n g I n f o r m a t i o n

Description Catalogue Number

EC 25 with connection contact, for use onto 1.2 mm PCB 6623 2 022-xx

EC 25 with disconnection contact, for use onto 1.2 mm PCB 6623 2 027-xx

EC 20 with connection contact, for use onto 1.5 mm PCB, enhanced LSA-6623 2 040-xx

EC 17 with connection contact, for use onto 1.2 mm PCB 6623 2 020-xx

EC 17 with disconnection contact, for use onto 1.2 mm PCB 6623 2 026-xx

EC 17 with connection contact, for use onto 1.5 mm PCB 6623 2 028-xx

EC 17 with connection contact, for use onto 1.5 mm PCB, enhanced LSA-6623 2 041-00

EC 14 with connection contact, for use onto 1.5 mm PCB 6623 2 036-10

Accessories

Accessories, Test cord, 2-pole 6623 2 023-00

Accessories, Test cord, 4-pole 1) 6623 2 030-00

Accessories, Test cord, 2-pole, with open leads 6623 2 033-00

Accessories, Patch cord, 2-pole 6623 2 024-00

Accessories, Disconnection plug 1) 6623 3 050-00

Accessories, Changeover adapter, 2-pole, 2m; EC to open leads 2) LSA-6623 2 052-02

Accessories, Changeover adapter, 2-pole, 2m; EC to Series2 2) LSA-6623 2 017-02

Accessories, Changeover adapter, 2-pole, 2m; EC to SeriesNT 2) LSA-6623 2 018-02

Accessories, Test cord, 2-pole; 200mm 2) LSA-6623 2 054-00

Over voltage protection magazine, 10 pairs PRO-6623 2 044-xx

1) Only for disconnection modules like 6623 2 027-xx 6623 2 026-xx

2) Only for connection modules like LSA-6623 2 040-00; LSA-6623 2 040-50; LSA-6623 2 041-00