Microsoft Dynamics GP 2016 New Features | Robin Hauswirth and Jack Sawicki
Kamran Shamaei Prof. Gregory S. Sawicki Prof. Aaron M. Dollar
description
Transcript of Kamran Shamaei Prof. Gregory S. Sawicki Prof. Aaron M. Dollar
Kamran ShamaeiYale University
Mechanical Engineering
Subject-Specific Predictive Models of Lower-limb Joint Quasi-Stiffness and Applications in Exoskeleton Design
Kamran ShamaeiProf. Gregory S. Sawicki
Prof. Aaron M. Dollar
Kamran ShamaeiYale University
Mechanical Engineering
Ankle-Foot Prosthesis from MIT (fig. from MIT news)
Ankle-Foot Prosthesis from U. Michigan
(fig. from PLoS One)
Scope and Application: Prostheses and Orthoses
HULC from UC Berkeley
C-Leg from Ottobock Underactuated Exosksleton from MIT (fig. from
scientificamerican.com)
Compliant SC Orthosis from Yale
Kamran ShamaeiYale University
Mechanical Engineering
Challenge: How to size the components of these devices for a
specific user size and gait speed?
Kamran ShamaeiYale University
Mechanical Engineering
Common Approach: Use average values for joint stiffnesses obtained
from gait lab data for a randomized sample population
Kamran ShamaeiYale University
Mechanical Engineering
Drawbacks
• Sample population body stature is not necessarily representative of the user’s
• Costly and time-consuming
• Design centers usually do not have a gait lab
Kamran ShamaeiYale University
Mechanical Engineering
Drawbacks
• Sample population body stature is not necessarily representative of the user’s
• Costly and time-consuming
• Design centers usually do not have a gait lab
Kamran ShamaeiYale University
Mechanical Engineering
Drawbacks
• Sample population body stature is not necessarily representative of the user’s
• Costly and time-consuming
• Design centers usually do not have a gait lab
Kamran ShamaeiYale University
Mechanical Engineering
Alternative Framework
Kamran ShamaeiYale University
Mechanical Engineering
Design Example: A Quasi-Passive Knee Exoskeleton
Shamaei K, Napolitano P., and Dollar A. (2013) A Quasi-Passive Compliant Stance Control Knee-Ankle-Foot Orthosis, ICORR, Seattle, Washington, USA.
Kamran ShamaeiYale University
Mechanical Engineering
Linear Moment-Angle Behavior of the Knee in Stance
Design: Compliantly support the knee by an exoskeletal springShamaei et al., PLoS One 2013aShamaei et al., ICORR 2011
Kamran ShamaeiYale University
Mechanical Engineering
Yale Quasi-Passive Stance Control Orthosis
Shamaei K, Napolitano P., and Dollar A. (2013) A Quasi-Passive Compliant Stance Control Knee-Ankle-Foot Orthosis, ICORR, Seattle, Washington, USA.
Kamran ShamaeiYale University
Mechanical Engineering
Challenge: How to size the spring for a specific user and gait speed?
K (Nm/rad)~ [80 , 800]Shamaei et al. (2013) PLoS One
Kamran ShamaeiYale University
Mechanical Engineering
Linear Moment-Angle Behavior of the Knee in Stance, a Closer Look
Tune the stiffness of the device according to the body size and gait speed
K is:• User-specific• Gait-specific
(Shamaei, ICORR 2011)
Kf
Ke
K
Kamran ShamaeiYale University
Mechanical Engineering
Framework : Mathematical/Statistical models that estimate knee quasi-stiffnesses using a set of
measurable parameters
Gait SpeedWeightHeight
Joint Excursion
Kf
Ke
K
Kamran ShamaeiYale University
Mechanical Engineering
Start with Inverse Dynamics Analysis
MAnkle ,FAnkle
MKnee
GRF, GRM
Kamran ShamaeiYale University
Mechanical Engineering
Linking to Gait and Body ParametersMKnee
MKnee~ f(W,V,H)
MKnee~ Kiθi
Ki ~ f(WVH/θi -WV/θi - WH/θi - W/θi - 1/θi - WVH- WH)
Kf
Ke
Kamran ShamaeiYale University
Mechanical Engineering
Statistical Analysis
Regression on Experimental Data
Ki ~ f(WVH/θi, WV/θi, WH/θi,
W/θi, 1/θi, WVH, WH)
Kamran ShamaeiYale University
Mechanical Engineering
Springy Behavior at the Optimal Gait Speed
Support the knee using a spring
Kamran ShamaeiYale University
Mechanical Engineering
Adjust the Stiffness at Higher Gait Speeds
Assist the knee using a combination of a spring and an active component
Kamran ShamaeiYale University
Mechanical Engineering
Comparison with Models that Use Average Values
From: Shamaei K, Sawicki G, and Dollar A. (2013) Estimation of Quasi-Stiffness of the Human Knee in the Stance Phase of Walking, PLOS ONE.
Kamran ShamaeiYale University
Mechanical Engineering
From: Shamaei K, Sawicki G, and Dollar A. Estimation of Quasi-Stiffness of the Human Hip in the Stance Phase of Walking, in review.
Moment-Angle Performance of Hip
Kamran ShamaeiYale University
Mechanical Engineering
Moment-Angle Performance of Ankle
From: Shamaei K, Sawicki G, and Dollar A. (2013) Estimation of Quasi-Stiffness and Propulsive Work of the Human Ankle in the Stance Phase of Walking, PLOS ONE.
Kamran ShamaeiYale University
Mechanical Engineering
Similar Approach for Hip and Ankle
MAnkle ,FAnkle
Mknee , FKnee
GRF, GRM
MHip
• Quasi-Stiffness• Work
• Quasi-Stiffness
Kamran ShamaeiYale University
Mechanical Engineering
Models for Ankle Quasi-Stiffness and Work
From: Shamaei K, Sawicki G, and Dollar A. (2013) Estimation of Quasi-Stiffness and Propulsive Work of the Human Ankle in the Stance Phase of Walking, PLOS ONE.
Kamran ShamaeiYale University
Mechanical Engineering
Models for Hip Quasi-Stiffness
From: Shamaei K, Sawicki G, and Dollar A. Estimation of Quasi-Stiffness of the Human Hip in the Stance Phase of Walking, in review.
Kamran ShamaeiYale University
Mechanical Engineering
Conclusions
• Models accurately predict the stiffnesses compared with average values
• Utilize these equations in design of exoskeletons and prostheses
• Ideally adjust the stiffness of the device according to the gait speed
Kamran ShamaeiYale University
Mechanical Engineering
Conclusions
• Models accurately predict the stiffnesses compared with average values
• Utilize these equations in design of exoskeletons and prostheses
• Ideally adjust the stiffness of the device according to the gait speed
Kamran ShamaeiYale University
Mechanical Engineering
Conclusions
• Models accurately predict the stiffnesses compared with average values
• Utilize these equations in design of exoskeletons and prostheses
• Ideally adjust the stiffness of the device according to the gait speed
Kamran ShamaeiYale University
Mechanical Engineering
Thanks for Your AttentionThanks for Your Attention• Experimental data:
• 26 subjects• 216 gait cycles• Gait speed (m/s): [0.75 , 2.63]• Height (m): [1.45 , 1.86]• Weight (kg): [57.7 , 94.0]
• Data granted by: Prof. DeVita, Prof. Sawicki, and Prof. Frigo• Funding: US Defense Medical Research and Development Program, grant #W81XWH-11-2-0054