KALMATRON® Offers The Solution To These Age-old Problems in Just ONE ADMIXTURE.
-
Upload
dilip-shah -
Category
Technology
-
view
80 -
download
1
Transcript of KALMATRON® Offers The Solution To These Age-old Problems in Just ONE ADMIXTURE.
![Page 1: KALMATRON® Offers The Solution To These Age-old Problems in Just ONE ADMIXTURE.](https://reader036.fdocuments.in/reader036/viewer/2022081902/58ace9231a28ab40588b5cc7/html5/thumbnails/1.jpg)
KALMATRON® concrete admixture
Shrinkage cracks, leaking, flaking, slab curling, concrete flu, and cracking under the extreme stresses of freeze thaw cycles - these are just some of the problems associated with concrete.
KALMATRON® offers the solution to these age-old problems in just ONE admixture.
KALMATRON® (U.S.A. Patent 5,728,208) is the Swiss Army Knife of Concrete Admixtures.
It is a water reducer, plasticizer, water proofing and shrinkage controlling agent, curing compound, corrosion inhibitor, cement class upgrading and high early strength admixture.
Simple to use, just add the dry powder KALMATRON® to the batch.
Some benefits of using KALMATRON®:
o=> NO shrinkage crackso=> High resistance to freeze-thaw cycles (F350 on 28th day)o=> 100% water proofo=> High early strength (up to 60 MPa/8,000 PSI based on mix design)o=> 100% safe and non toxic o=> Safe for food and drinking water, NSF Reg. #136880, Category Codes: R2 and RX 2‐o=> Applied in temperature ranges from -4 F to 104 F (-22 C to 40 C) o=> High workability with low slump (1.3 cm / 0.5 inches)o=> No other admixtures are neededo=> Can be used for coating metal and concrete surfaces - http://www.shieldcrete.com/plastcrete.htmlo=> Highest resistance to chlorine, sea salt, acids and oils, even crude oil. Meets ASTM C1582o=> Chemically inhibits the corrosive action of chlorides on
![Page 2: KALMATRON® Offers The Solution To These Age-old Problems in Just ONE ADMIXTURE.](https://reader036.fdocuments.in/reader036/viewer/2022081902/58ace9231a28ab40588b5cc7/html5/thumbnails/2.jpg)
reinforcing steel and pre-stressed strands in concrete o=> NO curing is neededo=> Precast, shotcrete and gunite applications
KALMATRON® is recommended for:
Swimming pools and pondsSmall forms and industrial precast forms - sinks, countertops, foundation pillars, monolithic slabs, wall panels.Relining of aged structuresRoads, floors, and other high traffic areas - loading docks, yards, restaurants, freeways and highways, pavements, food processing and storage facilities, oil refineries, tobacco plants, chemical plants, and tanneries.Potable water storage structuresOne step stucco application - no scratch and brown coats needed.Silos, airport runway slabs, railroad sleepers
…and much more.
To request a free sample of KALMATRON®, please visitwww.kalmatron.com
Email us:
Or call us:
+1 (415) 385-3290
www.kalmatron.co