KALED24144A 24' LED 144Hz Gaming Monitor User Manual · • User guide • DVI (24 pin) cable •...
Transcript of KALED24144A 24' LED 144Hz Gaming Monitor User Manual · • User guide • DVI (24 pin) cable •...
Attention
Please handle this product with care and inspect it regularly to ensure it is in good working order.
If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support.
Table of ContentsSafety Precautions.............................................................................................................................2Accessories...........................................................................................................................................3Setup.......................................................................................................................................................3
Installing the stand base............................................................................................................3Technical Specifications..................................................................................................................3Product Layout...................................................................................................................................4
Front view........................................................................................................................................4Rear view..........................................................................................................................................5
Main Menu.............................................................................................................................................5BRIGHTNESS...................................................................................................................................5IMAGE................................................................................................................................................6COLOR TEMP.................................................................................................................................6OSD SETTING.................................................................................................................................6RESET................................................................................................................................................7MISC....................................................................................................................................................7LOW BLU RAY MENU.................................................................................................................7
Supported Timing Modes...............................................................................................................8Care and Maintenance.....................................................................................................................8
Safety Tips.......................................................................................................................................8Troubleshooting.................................................................................................................................8
1
Safety Precautions• This monitor is manufactured and tested on the principle that a user’s
safety comes first. Improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy.
• This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor. If you’re unsure of the power supply in your residence, consult with your power company.
• Do not try to repair the monitor yourself as it contains no user-serviceableparts. The monitor should only be repaired by a qualified Kogan technician.
• Do not remove the monitor cabinet. There is high-voltage parts inside thatmay cause electric shock to human bodies, even when the power cord is disconnected.
• Stop using the monitor if the cabinet is damaged. Contact the Kogan customer support team for advice.
• Put your monitor in a clean, dry environment. Unplug the monitor immediately if gets wet and contact the Kogan customer support team.
• Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the glass screen.
• Keep the monitor away from magnetic objects, motors, TV sets, and transformers.
• Do not place heavy objects on the cable or power cord.• For displays with glossy bezels the user should consider the placement of
the displays as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
• Due to safety concerns, if the VESA mounting kit is purchased separately, please make sure the mounting kit is UL-Listed, and replaceable only by service personnel.
2
According to WEEE regulation, this monitor can't be handled as normal trash in Australia when it is out of usage. Please refer to the recycle information from our website to handle it.
AccessoriesThe monitor should arrive with the following accessories included.
• AC Power cord• Adaptor• User guide• DVI (24 pin) cable• VGA (15 pin) cable
Setup
Installing the stand base
1. Place the monitor face down on a soft cushioned surface or blanket.2. Install the stand base to the monitor.3. Fix the stand base to the monitor with one screw, as shown.
Technical SpecificationsScreen Diagonal 61.0cm (24.0”)
Resolution 1920 x 1080
Brightness (typ.) 250 cd/m2
Contrast ratio 1000:1
Aspect ratio 16:9
Display colour 16.7M
Input connectors D-Sub, DVI, HDMI, Audio
Speaker output 2 x 2W
Power supply Adaptor (Input: AC100-240V 50/60HzOutput: DC12V 3.33A)
Dimensions (H x W x D) 416 x 570 x 185mm
Wall mount hole pattern 100 x 100
Wall mount screw size M4 x 8
3
Product Layout
Front view
1 – MENUDisplay main menu.Enter selected item in OSD menu.
2 – UPScroll up in OSD menu.When not in OSD menu, use as hotkey function.
3 – DOWNScroll down in OSD menu.When not in OSD menu, use as hotkey function.
4 – VOL+Increase in OSD menu.When not in OSD menu, display adjust volume menu.
5 – VOL-Decrease in OSD menu.When not in OSD menu, display LOW BLU RAY menu. LOW BLU RAY mode is disabled when ECO or DCR is active.
6 – AUTODisplay signal source menu.After holding down for 3 seconds, automatically adjusts the horizontal/vertical position, clock and phase of screen image in VGA source.
7 – POWERPower on/off
8 – LED IndicatorLED indicator colour is red in sleep mode and blue in ON mode.
4
Rear view
1 – HDMIHDMI input (HDMI A Type 19 pin)
2 – DVIDVI input (DVI-D 24 pin)
3 – VGAVGA input (D-Sub 15 pin)
4 – AUDIOAudio input (3.5mm jack)
5 – DCPower input (DC 12V)
Main Menu
BRIGHTNESS
Sub Menu Menu Item Description
BRIGHTNESS 0 – 100 Black level of image
CONTRAST 0 – 100 White level of image
ECO STANDARD Default settings
GAME Gaming settings
MOVIE Film/video settings
TEXT Text editing/reading settings.
DCR ON Set the DCR mode on or off.
OFF
5
IMAGE
Sub Menu Menu Item Description
H.POSITION 0 – 100 Adjust the horizontal and vertical position of the image.
V.POSITION 0 - 100
CLOCK 0 – 100 Adjust screen image clock
PHASE 0 – 100 Adjust screen image phase
ASPECT WIDE Adjust image to widescreen
4 : 3 Adjust image to 4 : 3
COLOR TEMP.
Sub Menu Menu Item Description
COLOR TEMP. NORMAL Select the colour temperature between Normal, Warm, Cool or User defined.WARM
COOL
USER
RED When colour temperature is set to User defined, you can adjust the Red, Green and Bluesettings.
GREEN
BLUE
OSD SETTING
Sub Menu Menu Item Description
LANGUAGE ENGLISH Select the OSD language.
FRENCH
GERMAN
ITALIAN
SPANISH
DUTCH
OSD H.POS 0 – 100 Adjust the horizontal and vertical position of OSD menu.OSD V.POS 0 - 100
OSD TIMER 5 – 60 Select preset time to automatically turn off OSD menu.
TRANSPARENCY 0 – 100 Set transparency for OSD menu.
6
RESET
Sub Menu Menu Item Description
IMAGE AUTO ADJUST
- Automatically adjust the horizontal/vertical position,clock and phase of the screen image.
COLOR AUTO ADJUST
- Automatically adjust the colour of the screen image.
RESET - Reset to default settings.
MISC
Sub Menu Menu Item Description
HOTKEY TYPE ECO + DCR Set hotkey to ECO and DCRadjustment.
ASP + ECO Set hotkey to Aspect and ECO adjustment.
BRI + CON Set hotkey to Brightness and Contrast adjustment.
SIGNAL SOURCE VGA Select the input signal source between VGA, DVI and HDMI.DVI
HDMI
AUDIO SELECT ANALOG Select audio input mode between analog and digital.
DIGITAL
VOLUME 0 – 100 Adjust speaker volume.
LOW BLU RAY MENUEvery monitor produces a strain of blue spectrum light that is oneof the critical causes of eye damage, eye strain, headaches and sleeping disorders. Low Blue Ray mode is designed to deal with the everyday problem of blue light exposure, allowing a for a healthier time spent in front of your computer.
Press the VOL- hotkey to display the LOW BLU RAY menu when the main menu is turned off, then press VOL+ or VOL- to adjust.
7
Supported Timing ModesTiming Mode VGA DVI HDMI
720 x 400 @ 70Hz Yes Yes Yes
640 x 480 @ 60Hz Yes Yes Yes
640 x 480 @ 75Hz Yes
800 x 600 @ 60Hz Yes Yes Yes
800 x 600 @ 75Hz Yes
1024 x 768 @ 60Hz Yes Yes Yes
1024 x 768 @ 75Hz Yes
1360 x 768 @ 60Hz Yes Yes Yes
1920 x 1080 @ 60Hz Yes Yes Yes
1920 x 1080 @ 100Hz Yes Yes Yes
1920 x 1080 @ 120Hz Yes Yes Yes
1920 x 1080 @ 144Hz Yes
Care and Maintenance• Avoid exposing your monitor directly to sunlight or other heat sources. Place your
monitor away from the sun to reduce glare.
• Put your monitor in a well ventilated area.
• Do not place any heavy things on top of your monitor.
• Make certain your monitor is installed in a clean, moisture-free area.
• Keep your monitor away from magnets, motors, transformers, speakers, and TV sets.
Safety Tips
• If smoke, abnormal noises or odours came out from your monitor, you should remove thepower cord immediately and contact the Kogan customer support team.
• Never remove the rear cover of your monitor cabinet. The display unit inside contains high-voltage parts and may cause electric shock to human bodies.
• Never try to repair your monitor yourself. Always call the Kogan customer support team for information.
TroubleshootingNo Power • Make sure the AC power cord is securely connected to the
power adapter and the power supply is firmly connected to the monitor.
• Plug another electrical device into the power outlet to verify that the outlet is working.
• Make sure all signal cables are connected.
Power on but no screen image
• Make sure the video cable supplied with the monitor is tightly connected to the video output on the back of the computer.
• Adjust the brightness.
Wrong or abnormal colours
• If any colours (red, green, blue) are missing, check the video cable to ensure it is securely connected. Loose or broken pins in the cable connector can cause an improper connection.
• Connect the monitor to another computer.
8