Kalamazoo industries S612V Combination Sander
2
PRESS RELEASE Date: June 2015 Release: Immediate Contact: Scott Allen [email protected] Kalamazoo Industries DS12V disc sander has vacuum base for dust collection The Kalamazoo Industries DS12V disc sander has an enclosed base housing a 100 CFM vacuum dust collector to help contain abrasive particles produced during sanding. This can greatly improve the environmental conditions inside a shop. A door in the base allows easy access to the cloth bag filter, which can be removed, shaken out and easily replaced. Other features include a steel work table that tilts down to 45 degrees and up to 90 degrees, a 1 HP, 1 PH 110V direct drive motor, and a 12-inch diameter disc holder that accepts peel and stick PSA abrasive discs. All Kalamazoo Industries machines are manufactured in the USA.
-
Upload
aaron-allen -
Category
Engineering
-
view
126 -
download
3
Transcript of Kalamazoo industries S612V Combination Sander
PRESS RELEASEDate: June 2015Release: ImmediateContact: Scott Allen
Kalamazoo Industries DS12V disc sander has vacuum base
for dust collection
The Kalamazoo Industries DS12V disc sander has an enclosed base housing a
100 CFM vacuum dust collector to help contain abrasive particles produced
during sanding. This can greatly improve the environmental conditions inside a
shop. A door in the base allows easy access to the cloth bag filter, which can be
removed, shaken out and easily replaced. Other features include a steel work
table that tilts down to 45 degrees and up to 90 degrees, a 1 HP, 1 PH 110V
direct drive motor, and a 12-inch diameter disc holder that accepts peel and
stick PSA abrasive discs.
All Kalamazoo Industries machines are manufactured in the USA.
# # #
