kahrein katalogas

7/31/2019 kahrein katalogas

http://slidepdf.com/reader/full/kahrein-katalogas 1/365



Order Information

Address: Kathrein Inc., Scala DivisionP.O. Box 4580

Medford, OR 97501USA

Phone: (541) 779-6500

Fax: (800) 850-1116 (toll-free in USA and Canada only)(541) 779-3991

Email: [email protected]

Web site: www.kathrein-scala.com

Copyright 2011 by Kathrein Inc., Scala Division. All rights reserved.The contents of this book may not be reproduced in whole or in part in any manner without the expressed approval

of Kathrein Inc., Scala Division.

ISO 9001 Quality and ISO 14001 Environmental Management

Kathrein-Scala is an ISO 9001 and ISO 14001 certified companyand is in voluntary compliance with EU Directive 2002-95-EC for

Reduction of Hazardous Substances (RoHS).

Kathrein Inc., Scala Division, Kathrein, Scala, Paraflector, Miniflector, and Paraslot are registered trademarks of Kathrein Inc., Scala Division.WiMAX is a trademark of the WiMAX Forum.

Smith Chart is a registered trademark of Analog Instruments Company used with permission.

Catalogs are available for the following:

30–512 MHz700–3800 MHz

A CD-ROM is also available containing both catalogs plusadditional technical information.

All specifications are subject to change without notice.The latest specifications are available at www.kathrein-scala.com.

Website

Kathrein-Scala’s Website may be found at www.kathrein-scala.com . The Website features complete product

data sheets in viewable and downloadable Acrobat files, news and general information about Kathrein,information on new additions to our product line, and more. Sign up for Kathrein-Scala’s e-mail news bulletin,request catalogs and CD-ROM’s, and inquire about special or custom products. Check the Website for the most

up-to-date specifications and radiation patterns.

C32



Kathrein Inc., Scala Division, is a leading manufacturerof professional antenna and filter systems for

communications and broadcasting, serving commercialand governmental markets throughout North Americaand the Caribbean region. The company is a member

of the Kathrein Group, the world’s oldest and largestsource of professional antenna and filter products for

communication and broadcast applications.

Kathrein-Scala is ISO9001-certified for quality standardsand systems and ISO14001-certified for environmentalstandards and is in voluntary compliance with EU

Directive 2002-95-EC for Reduction of HazardousSubstances (RoHS). The company has been producing

lead-free products since May of 2006.

Our product groups include professional antennas, RFfilters, and accessories for a wide range of applications,including:

● Wireless mobile communications● TV and FM Broadcasting● Wireless Internet● Point-to-point and point-to-multipoint data and

control networks● Land-mobile radio communications systems of all

types

This product catalog for 700 – 3800 MHz contains thelatest in antennas and accessories to accommodate

the needs of the rapidly advancing telecommunicationsindustry. Some 50 products are newly listed. Extremelybroad-band antennas, covering wireless allocations

from 1.7 to 2.7 GHz are within Kathrein’s recentlyintroduced products.

As a convenience for our customers, beginning inearly 2011, many Kathrein panel antennas are being

shipped with mounting brackets or band clamps asstandard equipment. Look for the notation “Mounting

Clamps Included” on the catalog page to find affectedmodels.

Our newest products for wireless applications featurebroadband operation, and incorporate adjustable

electrical downtilt with optional remote control, animportant advance that enhances customer satisfaction

and reduces site installation and maintenance costs.

We welcome your inquiries and we look forward to theopportunity to serve you!

Company Profil



Tab Page Summary

Dualband / Multiband Advanced Panel AntennasDualband • Omnidirectional • 700-960 / 1710-2170 MHz • X PolarizationDualband • 698-894 / 1710-2170 MHz • XX Polarization

Dualband • 824-960 / 1710-2170 MHz • V / V Polarization

Dualband • 790-960 / 1710-2690 MHz • XX PolarizationDualband • Trisector • 698-894 / 1710-2170 MHz • XX Polarization

Tripleband • 790-960 / 1710-2690 MHz • XXX Polarization

700 and 800 MHz X-Polarization Panel Antennas698-960 MHz • X Polarization700-960 MHz • XX Polarization

1710 to 2690 MHz Antennas1710-2200 MHz • XX Polarization1710-2200 MHz • X Polarization

1710-2690 MHz • V Polarization1710-2690 MHz • XX Polarization

1710-2170 MHz / 2496-2690 MHz Panel Antennas • XX Polarization1710-2690 MHz • V Polarization

2496-2690 MHz • X Polarization

2496-2690 MHz • XX Polarization

Trisector • 1710-2170 MHz • X Polarization • Adjustable Electrical Downtilt

700 MHz Singleband / Dualband Panel Antennas698-894 MHz • X Polarization • Fixed Downtilt

698-894 / 1710-2170 MHz • XX Polarization • Fixed Downtilt

Remote Electrical Downtilt

Other Directional AntennasBi-Directional Multiband

Log Periodic

YagiHalf-Parabolic

Omnidirectional Antennas

Indoor and Special Application AntennasE-911

TMA’s, Filters, & Electrical AccessoriesTower Mount AmplifiersPower Dividers & Power Taps

Combiners

DuplexersFilters

Couplers, Power Spitters, Hybrid Ring Junctions, 50 Ohm Loads, GPS Amplifier

Mechanical Accessories Mounting Kits

Dimensions of Panel Profiles

Technical Information

Technical Notes

FormulaeGlossary



1 x 131 1847 . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

1 x 738 546 . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

131 1847. . . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

2 x 131 1847 . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

2 x 738 546 . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

3 x 738 546 . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

728 044 . . . . . . . . . . . . . . . . . . . . . . . . Decoupled power splitter, 900, 1:3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302

729 812 . . . . . . . . . . . . . . . . . . . . . . . . Decoupled power splitter, 900, 1:3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302

736 347 . . . . . . . . . . . . . . . . . . . . . . . . Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

736 350 . . . . . . . . . . . . . . . . . . . . . . . . Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230

738 192 . . . . . . . . . . . . . . . . . . . . . . . . Omni antenna 806-894 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229

738 446 . . . . . . . . . . . . . . . . . . . . . . . . Bidirectional microcell antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

738 446 . . . . . . . . . . . . . . . . . . . . . . . . Bidirectional microcell antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

738 546 . . . . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

739 489V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

739 619 . . . . . . . . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

739 620 . . . . . . . . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

741 573 . . . . . . . . . . . . . . . . . . . . . . . . Omni indoor antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245


741 988V01 . . . . . . . . . . . . . . . . . . . . 88° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137



742 033 . . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314

742 034 . . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314

742 113 . . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320


742 192V01 . . . . . . . . . . . . . . . . . . . . Log-periodic antenna 790-2690 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216








742 222V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21




742 226V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

742 233V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140742 235V01 . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143


742 237 . . . . . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

742 263 . . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315

742 264V02 . . . . . . . . . . . . . . . . . . . . 65° X-pol dual-band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27



742 290 . . . . . . . . . . . . . . . . . . . . . . . . 90° V-pol dual-band panel antenna w/combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63


Model Description Page

Model Number List

Indicates New Model


http://slidepdf.com/reader/full/kahrein-katalogas 6/365v

Model Number List


782 10168 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287

782 10169 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287

782 10170 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287

782 10171 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287

782 10172 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287

782 10215 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285

782 10216 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285

782 10253 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

782 10254 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

782 10255 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

782 10256 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

782 10257 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285

782 10265 . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285

782 10347 . . . . . . . . . . . . . . . . . . . . . 3 sector DTMA mounting bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319



782 10401 . . . . . . . . . . . . . . . . . . . . . Dual tower mount amplifier PCS/PCS/24 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259

782 10404 . . . . . . . . . . . . . . . . . . . . . Dual tower mount amplifier PCS/PCS/24 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

782 10429 . . . . . . . . . . . . . . . . . . . . . Bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

782 10453 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

782 10454 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

782 10455 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

782 10456 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

782 10469 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275

782 10500 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283

782 10502 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283

782 10504 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279

782 10577 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203782 10578 . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204

782 10601 . . . . . . . . . . . . . . . . . . . . . Dual tower mount amplifier PCS/AWS/12 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255

782 10606 . . . . . . . . . . . . . . . . . . . . . Dual tower mount amplifier AWS/AWS/12 dB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257

782 10660 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 470-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271







782 10681 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269782 10682 . . . . . . . . . . . . . . . . . . . . . Dualband combiner 380-960 MHz - 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269






782 10850 . . . . . . . . . . . . . . . . . . . . . DC stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

782 11055 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

782 11056 . . . . . . . . . . . . . . . . . . . . . Smart bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201


Indicates New Model



Model Number List

782 11091 . . . . . . . . . . . . . . . . . . . . . Dualband combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277





784 10470 . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

790 213 . . . . . . . . . . . . . . . . . . . . . . . . 10 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296

790 881 . . . . . . . . . . . . . . . . . . . . . . . . Hybrid ring junction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303

791 397 . . . . . . . . . . . . . . . . . . . . . . . . Band stop filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290

791 398 . . . . . . . . . . . . . . . . . . . . . . . . Band pass filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292

791 498 . . . . . . . . . . . . . . . . . . . . . . . . Hybrid ring junction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303

791 594 . . . . . . . . . . . . . . . . . . . . . . . . Band stop filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290

792 170 . . . . . . . . . . . . . . . . . . . . . . . . 4.7 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296

792 180 . . . . . . . . . . . . . . . . . . . . . . . . 6 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296

792 219 . . . . . . . . . . . . . . . . . . . . . . . . Band stop filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 293

792 544 . . . . . . . . . . . . . . . . . . . . . . . . Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289

792 699 . . . . . . . . . . . . . . . . . . . . . . . . Hybrid combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281

792 702 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler with cable absorber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301

792 937 . . . . . . . . . . . . . . . . . . . . . . . . 4.7 dB coupler with N female connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296

792 964 . . . . . . . . . . . . . . . . . . . . . . . . 6 dB coupler with N female connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297


792 966 . . . . . . . . . . . . . . . . . . . . . . . . 10 dB coupler with N female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297

792 967 . . . . . . . . . . . . . . . . . . . . . . . . 10 dB coupler with 7-16 DIN female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297

793 006 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299




793 108 . . . . . . . . . . . . . . . . . . . . . . . . 10 dB coupler with N female connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296

793 301 . . . . . . . . . . . . . . . . . . . . . . . . DC stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207793 304 . . . . . . . . . . . . . . . . . . . . . . . . Bias tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206

793 506 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler (90° hybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295

793 554 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler (90° hybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298

793 555 . . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler with cable absorber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300

800 10046 . . . . . . . . . . . . . . . . . . . . . 90° V-pol dual band panel antenna / integrated combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

800 10121V01 . . . . . . . . . . . . . . . . . 88° X-pol dual band ADT panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57



800 10141 . . . . . . . . . . . . . . . . . . . . . 30° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

800 10147 . . . . . . . . . . . . . . . . . . . . . Omni dual band antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248

800 10202V02 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100800 10203V02 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

800 10204V02 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

800 10207V01 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

800 10208V01 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

800 10214V01 . . . . . . . . . . . . . . . . . 65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

800 10215V01 . . . . . . . . . . . . . . . . . 65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

800 10217V01 . . . . . . . . . . . . . . . . . 85° X-pol Cellular panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

800 10218V01 . . . . . . . . . . . . . . . . . 85° X-pol Cellular panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

800 10247V01 . . . . . . . . . . . . . . . . . 65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122


Indicates New Model



Model Number List


800 10290V01 . . . . . . . . . . . . . . . . . 65° X-pol triple band panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43



800 10294V02 . . . . . . . . . . . . . . . . . 65° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101



800 10305V02 . . . . . . . . . . . . . . . . . 65° X-pol Cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88






800 10314 . . . . . . . . . . . . . . . . . . . . . 65° X-pol integrated RET PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

800 10360 . . . . . . . . . . . . . . . . . . . . . 65° trisector PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

800 10368 . . . . . . . . . . . . . . . . . . . . . 13° V-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

800 10375 . . . . . . . . . . . . . . . . . . . . . 65° trisector PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

800 10378 . . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

800 10425V01 . . . . . . . . . . . . . . . . . 65° PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

800 10426V01 . . . . . . . . . . . . . . . . . 65° PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

800 10428V01 . . . . . . . . . . . . . . . . . 65° PCS antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

800 10430 . . . . . . . . . . . . . . . . . . . . . Indoor omni antenna 1710-6000 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246

800 10431 . . . . . . . . . . . . . . . . . . . . . Omni antenna 1710-2700 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236


800 10442 . . . . . . . . . . . . . . . . . . . . . Omni WiMAX antenna 2490-2690 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

800 10454V01 . . . . . . . . . . . . . . . . . 65° X-pol dual band panel antenna / integrated combiner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17


800 10465 . . . . . . . . . . . . . . . . . . . . . Indoor antenna with integrated combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243

800 10485V01 . . . . . . . . . . . . . . . . . 65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25800 10486V01 . . . . . . . . . . . . . . . . . 65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23


800 10504V01 . . . . . . . . . . . . . . . . . 65° X-pol AWS Panel Antenna, Extended Downtilt Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130




800 10516V01 . . . . . . . . . . . . . . . . . 65° XX-pol Cellular Panel Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85



800 10606V01 . . . . . . . . . . . . . . . . . 45° Dual-beam X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

800 10606V01 . . . . . . . . . . . . . . . . . 45° Dual-beam X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116800 10614V01 . . . . . . . . . . . . . . . . . 65° X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

800 10618 . . . . . . . . . . . . . . . . . . . . . 65° X-pol integrated RET PCS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

800 10621V01 . . . . . . . . . . . . . . . . . 65° WiMAX panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

800 10622 . . . . . . . . . . . . . . . . . . . . . 65° WiMAX panel antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125


800 10636 . . . . . . . . . . . . . . . . . . . . . 65° X-pol AWS panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

800 10643 . . . . . . . . . . . . . . . . . . . . . 30° X-pol cellular panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

800 10644 . . . . . . . . . . . . . . . . . . . . . 65° X-pol dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120



Indicates New Model



Model Number List

800 10651 . . . . . . . . . . . . . . . . . . . . . 65° X-pol PCS/WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

800 10665 . . . . . . . . . . . . . . . . . . . . . 65° X-pol dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

800 10666 . . . . . . . . . . . . . . . . . . . . . 65° X-pol dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

800 10675 . . . . . . . . . . . . . . . . . . . . . 65° X-pol multiband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

800 10676 . . . . . . . . . . . . . . . . . . . . . 65° X-pol multiband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

800 10677 . . . . . . . . . . . . . . . . . . . . . Dualband indoor antenna w/integrated combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244


800 10682 . . . . . . . . . . . . . . . . . . . . . 65° Dualband panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119


800 10701 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz single band X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75






800 10709 . . . . . . . . . . . . . . . . . . . . . Dualband indoor omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242

800 10721 . . . . . . . . . . . . . . . . . . . . . 85° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11









800 10764 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3



840 10046 . . . . . . . . . . . . . . . . . . . . . 47° X-pol WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155840 10054B . . . . . . . . . . . . . . . . . . . . 87° X-pol WiMAX panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

840 10250 . . . . . . . . . . . . . . . . . . . . . H-pol omni antenna 902-928 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

840 10407 . . . . . . . . . . . . . . . . . . . . . Remote control cable 3.3 ft (1 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

840 10408 . . . . . . . . . . . . . . . . . . . . . Remote control cable 6.6 ft (2 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

840 10409 . . . . . . . . . . . . . . . . . . . . . Remote control cable 16.4 ft (5 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

840 10410 . . . . . . . . . . . . . . . . . . . . . Remote control cable 32.8 ft (10 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

840 10411 . . . . . . . . . . . . . . . . . . . . . Remote control cable 82.7 ft (25 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

840 10412 . . . . . . . . . . . . . . . . . . . . . Remote control cable 131.2 ft (40 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209



840 10415 . . . . . . . . . . . . . . . . . . . . . Remote control cable 328.1 ft (100 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209840 10432 . . . . . . . . . . . . . . . . . . . . . Remote control cable 65.6 ft (20 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

840 10433 . . . . . . . . . . . . . . . . . . . . . Remote control cable 164 ft (50 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

840 10451 . . . . . . . . . . . . . . . . . . . . . Remote control cable 492.1 ft (150 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209





840 10510 . . . . . . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 227

840 10511 . . . . . . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 227


Indicates New Model


http://slidepdf.com/reader/full/kahrein-katalogas 10/365ii

Model Number List

840 10512 . . . . . . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna with integrated combiner . . . . . . . . . . . . . . . . . . 66, 227

840 10513 . . . . . . . . . . . . . . . . . . . . . 700 MHz dual band omni antenna with integrated combiner . . . . . . . . . . . . . . . . . . 66, 227

840 10515 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

840 10516 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

840 10517 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna with integrated combiner . . . . . . . . . . . . . . . 65

840 10518 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band trisector antenna with integrated combiner . . . . . . . . . . . . . . . 65

840 10520 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band panel antenna with integrated combiner. . . . . . . . . . . . . . . . . . . . 9

840 10525 . . . . . . . . . . . . . . . . . . . . . 65° 700 MHz dual band panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

840 21210 series . . . . . . . . . . . . . . . 60° 700 MHz X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164






840 21410 series . . . . . . . . . . . . . . . 60° 700 MHz dualband X-pol panel antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173












840 90013 . . . . . . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312

850 10002 . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

850 10002 . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321850 10003 . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

850 10003 . . . . . . . . . . . . . . . . . . . . . Mounting clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321

850 10005 . . . . . . . . . . . . . . . . . . . . . Kathrein installation tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

850 10006 . . . . . . . . . . . . . . . . . . . . . Dual panel mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321


850 10010 . . . . . . . . . . . . . . . . . . . . . Flexible sealing frame for trisector antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159


850 10014 . . . . . . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325



850 10017 . . . . . . . . . . . . . . . . . . . . . Panel azimuth adjustment kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325860 10002 . . . . . . . . . . . . . . . . . . . . . RET remote control signal splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196

860 10006 . . . . . . . . . . . . . . . . . . . . . RET central control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

860 10023 . . . . . . . . . . . . . . . . . . . . . Adjustable indoor power tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

860 10026 . . . . . . . . . . . . . . . . . . . . . Central control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

860 10030 . . . . . . . . . . . . . . . . . . . . . Lightning protection device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197

860 10046 . . . . . . . . . . . . . . . . . . . . . Portable control adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

860 10100 . . . . . . . . . . . . . . . . . . . . . 2-way RF power divider, 200 watts, N female. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263

860 10101 . . . . . . . . . . . . . . . . . . . . . 2-way RF power divider, 700 watts, 7-16 DIN female . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263



Indicates New Model



Model Number List




860 10136 . . . . . . . . . . . . . . . . . . . . . 2-way indoor power tap 694-2700 MHz May 21, 2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267



860 10142 . . . . . . . . . . . . . . . . . . . . . Low noise GPS Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284

860 10147 . . . . . . . . . . . . . . . . . . . . . Remote control unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

860 10148 . . . . . . . . . . . . . . . . . . . . . Remote control unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

CL-900B . . . . . . . . . . . . . . . . . . . . . . . Cellular/SMR log-periodic antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223

GC-1. . . . . . . . . . . . . . . . . . . . . . . . . . . Grounding clamp Jul 3, 2008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

K63236001. . . . . . . . . . . . . . . . . . . . . Adjustable indoor power tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

K637061 . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler (90° hybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294

K637067 . . . . . . . . . . . . . . . . . . . . . . . 3 dB coupler (90° hybrid) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294

K6373621 . . . . . . . . . . . . . . . . . . . . . . Hybrid ring junction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 303

K751161 . . . . . . . . . . . . . . . . . . . . . . . Omni antenna 806-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228

K7515641 . . . . . . . . . . . . . . . . . . . . . . Omni antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232

MF-900B . . . . . . . . . . . . . . . . . . . . . . . Miniflector antenna 890-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221



MKPP-23 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323

MKPS-1. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323

MKPS-13 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323





MKPX-10 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324

MKPX-11 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324MKPX-12 . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324

MKPX-2. . . . . . . . . . . . . . . . . . . . . . . . Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323






MKTB-1 . . . . . . . . . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324

MKTB-3 . . . . . . . . . . . . . . . . . . . . . . . . Tilt mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 324

OG-860/1920/GPS-A. . . . . . . . . . . E911 antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249

OGB6-915N. . . . . . . . . . . . . . . . . . . . Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230OGB9-915N. . . . . . . . . . . . . . . . . . . . Omni antenna 870-960 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

PDL2-55 . . . . . . . . . . . . . . . . . . . . . . . RF power divider for outdoor & indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264

PDL3-333 . . . . . . . . . . . . . . . . . . . . . . RF power divider for outdoor & indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264

PDL4-2222. . . . . . . . . . . . . . . . . . . . . RF power divider for outdoor & indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264

PR-850 . . . . . . . . . . . . . . . . . . . . . . . . Paraflector antenna 806-896 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219



RY-840B . . . . . . . . . . . . . . . . . . . . . . . Radome protected yagi antenna 806-869 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218


Model Alternate Model Number Description Page

Indicates New Model



Model Number List


SL11-915/DT2 . . . . . . . . . . . . . . . . . H-pol omni antenna 902-928 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

SL11-940/DT2 . . . . . . . . . . . . . . . . . H-pol omni antenna 928-953 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

K6226507 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226207 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226307 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226401 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226501 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226201 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226301 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

784 10367 . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226217 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226317 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226611 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226411 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226511 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226111 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226211 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

K6226311 . . . . . . . . . . . . . . . . . . . . . . 50 ohm RF load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

TY-840 . . . . . . . . . . . . . . . . . . . . . . . . . Yagi antenna 806-869 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217



Model Alternate Model Number Description Page

Indicates New Model



Technical information

Title Page

A

Advanced X-POL Antenna Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332

Attaching the RCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190

C

Calculating Downtilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331Calculating HPBW Touchdown Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333Comparison of Mechanical and Electrical Downtilt. . . . . . . . . . . . . . . . . . . . . . . . . . . 334

Control Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

D

Directional Antennas In Front of Reflecting Surfaces. . . . . . . . . . . . . . . . . . . . . . . . . 337

Dual Polarized Base Station Antennas for Polarization Diversity Systems . . . . . . . . 329

E

Engineering Reference - Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340

F

Feeder Line Installation for Panel Antennas with Four Connectors . . . . . . . . . . . . . . 188Feeder Line Installation for Triple-band Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . 189Formula For Estimating Gain For A Standard Directional Dipole Array . . . . . . . . . . . 331

G

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344

I

Isolation Between Dipoles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339

M

Mounting Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309

P

Panel Antenna Test Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Panel Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316

R

Radiation Patterns for Side-mounted Omnidirectional Antennas . . . . . . . . . . . . . . . . 336RET Components: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

S

Signal Distribution of Power Splitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335

Signal Distribution of Power Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335

W

Wind Survival Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333


http://slidepdf.com/reader/full/kahrein-katalogas 14/365i

Design and Testing Methods Kathrein Panel antennas are designed, manufactured, and tested using modern

computer modeling methods, up-to-date manufacturing techniques and sophisticated

measurement equipment to assure that every antenna that bears the Kathrein name will

provide long, reliable and trouble-free service. Only the finest materials are employedthat satisfy demands for safety, performance, strength, longevity and reliability. Our

antennas are designed to withstand the shock, vibration, moisture resistance, salt

spray, icing and temperature extremes according to rigorous IEC world standards for

antennas. Every antenna is 100% PIM and VSWR tested to exceed specifications. A

summary of the test standards for Kathrein antennas appears in Technical Bulletin #

118.

Radome Materials Every Kathrein radome is fabricated from high strength UV-resistant fiberglass; more

recent designs utilize a production process known as pulltrusion. This method of

fabrication forces a matrix of glass fibers and resins through precision dies, creating

a high strength design that when cured has a tensile strength some 4 times greater

than injection-molded, thermoformed plastics. Even glass filled thermoplastics do not

compare to this tough material. Kathrein’s pulltruded radomes are rigid envelopes that

add strength to the antenna structure. Kathrein’s radomes are extremely stable with

respect to thermal expansion. A typical 4-foot thermoplastic radome may expand by as

much as .117 inches under elevated temperature conditions, while a Kathrein radome

of the same size expands only .016 inches. This results in joints with higher integrity,

antennas that don’t buckle in the heat, or deform permanently in severe environments.

Of course, better joint stability means better sealing, which prevents moisture entry.

Reflectors Many backplanes and reflectors are formed from rigid alodined aluminum where

needed for strength and resistance to corrosion. When rigid pulltruded radomes

are employed, high conductivity plated copper reflectors are employed to reduce

losses and enhance radiation characteristics. Joints between individual parts of the

reflector/backplane assemblies are deliberately under tension to enhance point contact

conduction paths.

Radiators Kathrein radiating elements are precision-formed from the finest materials, cast

aluminum, brass, and tin plated, high purity copper, and are carefully chosen to

minimize loss and intermodulation products. They are modeled individually and

in arrays using such programs as Ansoft HFSS, Engleware Genesys, and NEC for

Windows.

Fasteners Fasteners and other materials are selected with care, not only for strength and

durability, but for compatibility with adjoining materials so that the passive

intermodulation characteristics of Kathrein antennas are the best in the industry.

Panel Antenna Product Features



Mounting Accessories

Mounting accessories are available in many sizes and varieties to accommodate many types

of installations. Kathrein’s standard pipe mount is usable from 2 inches up to 4.6 inches. For

lighter antennas, stainless steel band clamps are available for pipe diameters up to 5.3 inches.

Brackets are formed from hot dipped galvanized steel, and all hardware is stainless steel.

Many antennas are now being shipped with mounting devices as standard equipment

Feed Networks

While some advocate the use of microstrip feed networks, Kathrein employs high reliability,

low loss cable harnesses and power dividers. Coaxial cable harnesses, while complex, offer

superior PIM performance and straightforward designs without the costs associated with

low-loss substrate materials, and offer the ability to provide special characteristics, such as

downtilt, without the need to retool. Kathrein uses custom molded cable mounting devices

and harnessing clips to secure power divider networks, and employs carefully designed cable

interface junctions to minimize production of IM products.

Remote Controlled Electrical Downtilt

Kathrein’s latest adjustable downtilt antennas, many covering both the 700-900 MHz and

1700-2700 MHz bands, employ unique adjustment controls that permit rapid tilt adjustment

both manually and via optional remote control. No moving electrical parts are in contact with

each other, reducing the possibility of intermodulation.

Inverted Mounting Many of Kathrein’s antennas may be mounted inverted without the need for special orders. A

simple relocation of a drain hole plug permits an antenna to be mounted upside down using

standard hardware.

DC Grounding Most Kathrein antennas are fully DC-grounded devices, offering enhanced protection to the

antenna and base station equipment from static discharge and lightning. External metallic

parts of all antennas are grounded for the same reason.

Radiation Patterns

Kathrein maintains a full library of radiation patterns for its antennas, both horizontal and

vertical, at multiple downtilts (where appropriate), and at frequencies that span the operational

range of the antenna. These patterns are available as downloadable files from the Internet, and

on Kathrein’s CD-ROM catalog disk in formats that support many modern analytical tools.

Requests for CD-ROM’s may be made by phone, FAX or e-mail, or at our Website. Kathrein

radiation patterns are actual measured data from production antennas and represent accurately

the performance that can be expected at installation. Harmonized or idealized patterns are

never offered for analysis.


http://slidepdf.com/reader/full/kahrein-katalogas 16/365v

Panel Antenna Test Specifications

Kathrein Scala Division panel antennas are designed to survive the following environmental tests:

Parameter

2sinusoidal

2shocks

3low3high

relative

speed

4rain

5solar

2NaCl

Concentrate

Detail Parameter

displacement (mm)

acceleration (m/s2)

frequency range (Hz)

axes of vibration

duration (ms)

acceleration (m/s2)

number of shocks

direction of shocks

(°C)

(°C)

high (%)

(°C)Condensation (%)

(°C)

(m/s)

intensity

(impacting water)

(W/m2)

Concentration (%)

Humidity (%)

Temperature (°C)

Cyclical

Test Severity

7.4

4

5–9 9–200

3 axes

6

250

6 directions

-40 (cold)

+75 (dry heat)

93

+3090–100

+30

50

400,000 cycles

0.01m3 /min

90 kPa

water test chamber

1120

5

95–98

35

Duration

3 x 5 sweep cycles

16 hours

16 hours

21 days

6 cycles

none

15 min

max. 1000 hours

96 hours

(continuous)

Reference

1ETS 300 019-2-41IEC 721-3-4

1ETS 300 019-2-41IEC 721-3-4

1ETS 300 019-2-41IEC 721-3-4

1ETS 300 019-2-41

IEC 721-3-4

1ETS 300 019-2-41IEC 721-3-4

1ETS 300 019-2-41IEC 721-3-4

1ETS 300 019-2-41IEC 721-3-4

IEC 68-2-11

Type

Vibration

IEC class 4M5

(Mechanical Test)

Shocks

IEC Class 4M5

(Mechanical Test)

Air Temperature

IEC Class 4K2-

expanded

(Climatic Test)

Humidity

IEC Class 4K2(Climatic Test)

Air

IEC Class 4K2

(Climatic Test)

Water

IEC Class 4K2

(Climatic Test)

Radiation

IEC Class 4K2

(Climatic Test)

Salt mist

(Corrosion Test)

Note 1: ETS 300 019-2-4 : 1994: (Stationary use on non-weatherprotected locations)

European Telecommunication Standard

IEC 721-3-4 : 1995: (Stationary use on non-weatherprotected locations)

International Electrotechnical Commission

Note 2: Equipment under test mounted in the “in-use” position.

Note 3: Includes heat irradiation emitted from the equipment.

Note 4: The effect of splashing water is included in this test.

Note 5: The heating effect on equipment is covered by the test Dry Heat.Photochemical tests for materials are made separately.

500 bumps/each direc-

tion



Horizontal ElectricalBeamwidth Frequency Gain Model Downtilt Polarization Height Page

Omni 698–894 MHz 6 dBi 840 10510, 840 10511 0° +45° and -45° 24 inches 66 1710–2170 MHz 9 dBi 0°

698–894 MHz 6 dBi 840 10512, 840 10513 0° +45° and -45° 24 inches 66 1710–2170 MHz 9 dBi with Integrated Combiner 0°

Dualband • Omnidirectional • 698-894 / 1710-2170 MHz • X Polarization

Dualband • 790-960 / 1710-2690 MHz • XX Polarization


65° 806–960 MHz 8.5 dBi 800 10454V01 0° +45° and -45° 10.6 inches 171710–2180 MHz 9.5 dBi with Integrated Combiner 0°

790–960 MHz 11.4 dBi 742 226V01 0° +45° and -45° 22.8 inches 191710–2170 MHz 13.3 dBi 0°

790–960 MHz 11.4 dBi 742 222V01 0° +45° and -45° 22.8 inches 211710–2170 MHz 13.3 dBi with Integrated Combiner 0°

790–960 MHz 14 dBi 742 264V02 0°–14° ADT +45° and -45° 52.5 inches 271710–2180 MHz 17.2 dBi 0°–8° ADT

790–960 MHz 14 dBi 742 223V02 0°–14° ADT +45° and -45° 52.5 inches 291710–2180 MHz 17.2 dBi with Integrated Combiner 0°–8° ADT

790–960 MHz 15.9 dBi 742 265V02 0.5°–9.5° ADT +45° and -45° 76.1 inches 311710–2180 MHz 18.2 dBi 0°–6° ADT

790–960 MHz 16 dBi 742 224V02 0.5°–9.5° ADT +45° and -45° 76.1 inches 331710–2180 MHz 18.2 dBi with Integrated Combiner 0.5°–9.5° ADT

790–960 MHz 16.1 dBi 800 10485V01 2°–14° ADT +45° and -45° 80.2 inches 251710–2180 MHz 18.4 dBi 4°–14° ADT



790–960 MHz 16.6 dBi 742 225V02 0°–7° ADT +45° and -45° 99.7 inches 371710–2180 MHz 18.2 dBi with Integrated Combiner 0°–6° ADT

790–960 MHz 16 dBi 800 10665 0°–10° ADT +45° and -45° 78.6 inches 391710–2690 MHz 18.5 dBi 0°–6° ADT

790–960 MHz 17 dBi 800 10666 0.5°–9.5° ADT +45° and -45° 103.2 inches 411710–2690 MHz 18.5 dBi 0°–6° ADT

88° 790–960 MHz 13.4 dBi 800 10121V01 0.5°–12.5° ADT +45° and -45° 54.5 inches 571710–2180 MHz 16.4 dBi 0.5°–10° ADT

790–960 MHz 14.8 dBi 800 10122V01 0°–10° ADT +45° and -45° 75.5 inches 591710–2180 MHz 18 dBi 0°–6° ADT

790–960 MHz 16.3 dBi 800 10123V03 0.5°–7° ADT +45° and -45° 103.7 inches 611710–2180 MHz 17.9 dBi 0°–6° ADT

Dualband / Multiband Advanced Antennas


90° 824–960 MHz 7 dBi 742 290 0° Vertical / Vertical 12.9 inches 63 1710–2170 MHz 7 dBi with Integrated Combiner 0°

824–960 MHz 10 dBi 800 10046 0° Vertical / Vertical 26.1 inches 641710–2170 MHz 11 dBi with Integrated Combiner 0°

Dualband • 824-960 / 1710-2170 MHz • V / V Polarization

1


65° 698–894 MHz 10.5 dBi 840 10520 0° +45° and -45° 23.3 inches 9 1710–2170 MHz 13.3 dBi with Integrated Combiner 0°

698–894 MHz 10.5 dBi 840 10525 0° +45° and -45° 23.3 inches 9 1710–2170 MHz 13.5 dBi 0°

698–894 MHz 14.3 dBi 800 10764 0°–16° ADT +45° and -45° 55.2 inches 3 1710–2170 MHz 17.5 dBi 0°–10° ADT


698–894 MHz 16.4 dBi 800 10766 0°–10° ADT +45° and -45° 96 inches 7 1710–2170 MHz 18.5 dBi 0°–10° ADT

85° 698–894 MHz 13.5 dBi 800 10721 0°–16° ADT +45° and -45° 54.9 inches 11 1710–2170 MHz 16.5 dBi 0°–10° ADT

698–894 MHz 14.7 dBi 800 10722 0°–10° ADT +45° and -45° 72 inches 13 1710–2170 MHz 17.5 dBi 0°–10° ADT


Dualband • 698-894 / 1710-2170 MHz • XX Polarization

See the following page for triple band panel and dualband trisector antennas



A N T E N N A S

D u a l b a n d / M u l t i b a n d A d v a n c e d

Kathrein’s advanced antenna products are the result of long years of research and development to produce

antennas that provide maximum benefit for carriers operating in the cellular, PCS or AWS spectrum. Our

multiband products provide maximum performance for all wireless frequencies; gain, beamwidth, downtilt, and

isolation are uncompromised compared to single band antennas yet occupy minimum physical space.

Most double and triple band antennas feature cross-polarized (X-Pol) radiation systems, offering the benefits of

diversity operation but without the physical requirements of a space diversity implementation. Using our most

advanced products, a carrier may operate 3 independent three sector systems, cellular, PCS and AWS in the footprint

of one conventional 800 MHz monopole installation.

Kathrein’s higher gain antennas, characterized by narrow vertical beamwidths, include fully adjustable down-tilt,

(ADT) allowing site optimization without replacing antennas. Electrical downtilt is accomplished using non-contact,low intermodulation phase shifters to provide the exact beam tilt to maximize site performance. All Kathrein ADT

models may be optionally equipped for remote control operation. See more about this in the Remote Electrical

Downtilt section. Several antennas are equipped internally with the remote control unit, saving tower space and

reducing visual impact.

Some dual band antennas are equipped with on-board combiners/diplexers, reducing feedline requirements by a

factor of two, with no compromise in performance, saving both installation expense and tower loading.

Dualband / Multiband Advanced Panel Antennas

2


65° 806–960 MHz 14.6 dBi 800 10290V01 0°–14° ADT +45° and -45° 60.6 inches 43 1710–2180 MHz 14.8 dBi 0°–14° ADT

1710–2180 MHz 14.4 dBi 0°–14° ADT

790–960 MHz 16.3 dBi 800 10291V02 2°–14° ADT +45° and -45° 81 inches 451710–2180 MHz 16.2 dBi 0°–14° ADT

1710–2180 MHz 16.1 dBi 0°–14° ADT

790–960 MHz 17 dBi 800 10492V01 4°–12° ADT +45° and -45° 106.1 inches 47

1710–2180 MHz 16.7 dBi 0°–14° ADT1710–2180 MHz 16.7 dBi 0°–14° ADT

790–960 MHz 17 dBi 800 10292V02 2.5°–9.5° ADT +45° and -45° 106.1 inches 491710–2180 MHz 17 dBi 0°–10° ADT

1710–2180 MHz 16.7 dBi 0°–10° ADT

790–960 MHz 16 dBi 800 10675 0°–10° ADT +45° and -45° 78.6 inches 511710–2170 MHz 18 dBi 0°–6° ADT

2490–2690 MHz 17.8 dBi 0°–6° ADT

790–960 MHz 16.9 dBi 800 10692 2°–10° ADT +45° and -45° 78.6 inches 531710–2690 MHz 17.5 dBi 0°–10° ADT

1710–2690 MHz 17.1 dBi 0°–10° ADT

790–960 MHz 17 dBi 800 10676 0°–10° ADT +45° and -45° 103.2 inches 551710–2170 MHz 18 dBi 0°–6° ADT

2490–2690 MHz 18 dBi 0°–6° ADT

Tripleband • 790-960 / 1710-2690 MHz • XXX Polarization


65° 698–894 MHz 10.4 dBi 840 10515, 840 10516 0° +45° and -45° 24 inches 65 1710–2170 MHz 13.5 dBi 0°

698–894 MHz 10.4 dBi 840 10517, 840 10518 0° +45° and -45° 24 inches 65 1710–2170 MHz 13.5 dBi Trisector with 0°

Integrated Combiner

Dualband • Trisector • 698-894 / 1710-2170 MHz • XX Polarization



Dualband Panel AntennaXX- polarization

65°

698–894 MHz1710–2170 MH

XX - POL

Adjustable Electrical D

0°–16°, 0°–10°Internal Remote Co

800 10764

11223-E936.4133

698–894 MHz

Vertical pattern±45°- polarization

0°–16° electrical downtilt

Horizontal pattern±45°- polarization

1710–2170 MHz




General specifications:

Frequency range 698–894 MHz // 1710–2170 MHz

Impedance 50 ohms

VSWR <1.5:1

Intermodulation (2x20w) IM3:< -150 dBc

Polarization +45° and -45°

Connector 4 x 7-16 DIN female (long neck)

Isolation intrasystem >30 dB // intersystem >35 dB

IRT specifications:

Logical interface ex factory1) AISG 1.1

Protocols AISG 1.1 and 3GPP/AISG 2.0 compliant

Hardware interface2) 2 x 8pin connector acc. IEC 60130-9;according to AISG:– RCUin (male): Control / Daisy chain in– RCUout (female): Daisy chain out

Power supply 10–30 V

Power Consumption <1 W (standby); <8.5 W (motor activated)

Adjustment time (full range) 40 seconds

Adjustment cycles >50,000

Certification FCC 15.107 Class B Computing Devices

Specifications: 698–806 MHz 824–894 MHz 1710–1755 MHz 1850–1990 MHz 2110–2170 MHz

Gain 14.3 dBi 14.8 dBi 17.3 dBi 17.5 dBi 17.3 dBi

Front-to-back ratio >30 dB (co-polar) >27 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)32 dB (average) 30 dB (average) 34 dB (average) 34 dB (average) 34 dB (average)

Maximum input power 500 watts (at 50°C) 500 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C) 300 watts (at 50°C)per input

+45° and -45° polarization 68° (half-power) 65° (half-power) 61° (half-power) 60° (half-power) 61° (half-power)horizontal beamwidth

+45° and -45° polarization 15° (half-power) 13.5° (half-power) 7.5° (half-power) 7.5° (half-power) 7.5° (half-power)vertical beamwidth

Electrical downtilt 0°–16° 0°–16° 0°–10° 0°–10° 0°–10°continuously adjustable

Min sidelobe suppression for 0° 8° 16° T 0° 8° 16° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 17 16 16 dB 18 16 16 dB 18 18 17 dB 18 18 17 dB 18 18 17 dB

average 19 19 18 dB 22 20 20 dB 20 20 20 dB 20 20 20 dB 20 20 20 dBCross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB, 15 dB (avg) >8 dB, 14 dB (avg) >8 dB, 14 dB (avg) >10 dB, 16 dB (avg) >8 dB, 14 dB (avg)

Tracking 1.5 db 1.5 db 2.0 db 1.0 db 2.0 db

Squint ±2.5° ±4° ±4° ±1.5° ±4°

1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 andvice versa with a vendor specific command. Start-up operation of the RCU 86010149 ispossible in an RET system supporting AISG 1.1 or suppor ting 3GPP/AISG 2.0 after performinga layer 2 reset before address assignment. The protocol can also be changed as follows:AISG 1.1 to 3GPP: Enter "3GPP" into the additional data filed "Installer’s ID" and perform alayer 7 reset or a power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield"Installer’s ID" and perform a layer 2 reset or a power reset. After switching the protocol anyother information can be entered into the "Installer’s ID" field.

2) The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). Theconnector should be tightened by hand only!

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA4

Mounting Clamps Included




800 10764

1710–2170–45

7-16

iRCU

8pinfemale

8pinmale

8pinfemale

8pinmale

1710–2170+45

7-16

698– 894–45

698– 894+45

7-167-16

inoutiRCU

inout

kcengnolkcengnol

Mechanical specifications:

Weight 40.8 lb (18.5 kg)45.2 lb (20.5 kg) clamps included53.4 lb (24.2 kg) clamps and tilt kit included

Dimensions 55.2 x 11.8 x 6 inches(1403 x 300 x 152 mm)

Wind load at 93 mph (150kph)Front/Side/Rear 156 lbf / 59 lbf / 160 lbf

(690 N) / (260 N) / (710 N)Mounting category M (Medium)

Wind survival rating 150 mph (240 kph)Shipping dimensions 64.8 x 12.6 x 7.5 inches

(1646 x 322 x 190 mm)

Shipping weight 50 lb (22.7 kg)

Mounting Mounting hardware included for 2 to 4.6 inch(50 to 115 mm) OD masts.

Order Information:

Model Description

800 10764 Dualband antenna with 738 546 mounting bracket0°–16° // 0°–10° electrical downtilt

800 10764 K Dualband antenna with 738 546 mounting bracketand 850 10007 mechanical tilt bracket0°–16° // 0°–10° electrical downtilt

Reference the Mechanical Accessories section.

11.8 inches

(300 mm)

55.2 inches

(1403 mm)

2.625 inches ± 0.125

(68 mm ± 4)

6 inches

(152 mm)

56.4 inches(1433 mm)

58 inches

(1474 mm)

Note: Refer to part number

860 10149 for thespecifications of the

remote control actuator.

This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,

and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.

KATHREIN 860 10149

Tested To Comply

With FCC Standards




65°

698–894 MHz1710–2170 MH

XX - POL



800 10765

11224-D936.4134

698–894 MHz




1710–2170 MHz






Impedance 50 ohms

VSWR <1.5:1





IRT specifications:










Gain 15.3 dBi 15.8 dBi 18 dBi 18.5 dBi 18 dBi




+45° and -45° polarization 11.8° (half-power) 10.8° (half-power) 5.8° (half-power) 5.8° (half-power) 5.8° (half-power)vertical beamwidth



average 18 20 20 dB 20 22 20 dB 20 22 20 dB 20 22 20 dB 20 22 20 dBCross polar ratioMain direction 0° 25 dB (typical) 20 dB (typical) 25 dB (typical) 30 dB (typical) 25 dB (typical)Sector ±60° >10 dB, 16 dB (avg) >10 dB, 14 dB (avg) >8 dB, 15 dB (avg) >10 dB, 15 dB (avg) >8 dB, 15 dB (avg)

Tracking 1.0 db 1.5 db 1.5 db 1.0 db 1.5 db

Squint ±2.5° ±3° ±3° ±2.5° ±3°

1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 and viceversa with a vendor specific command. Start-up operation of the RCU 86010149 is possiblein an RET system supporting AISG 1.1 or supporting 3GPP/AISG 2.0 after performing a layer2 reset before address assignment. The protocol can also be changed as follows: AISG 1.1 to3GPP: Enter "3GPP" into the additional data filed "Installer’s ID" and perform a layer 7 reset ora power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield "Installer’s ID"and perform a layer 2 reset or a power reset. After switching the protocol any other informationcan be entered into the "Installer’s ID" field.


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA4





800 10765



Dimensions 75.5 x 11.8 x 6 inches (1918 x 300 x 152 mm)


(950 N) / (360 N) / (980 N)Mounting category H (Heavy)

Wind survival rating 150 mph (240 kph)

Shipping dimensions 85.3 x 12.7 x 7.5 inches (2166 x 322 x 190 mm)



11.8 inches

(300 mm)

75.5 inches

(1918 mm)

2.625 inches ± 0.125(68 mm ± 4)

6 inches

(152 mm)

76.7 inches

(1948 mm)

78.3 inches

(1989 mm)

698– 894

–45

7-16

1710–2170

+45

7-16

1710–2170

–45

7-16

698– 894

+45

7-16

IRT outin

8pin male

8pin female

IRT inout

8pin male

8pin femalelong neck long neck




This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.

KATHREIN 860 10149

Tested To Comply

With FCC Standards

Order Information:

Model Description







65°

698–894 MHz1710–2170 MH

XX - POL



800 10766

11225-C936.4135

698–894 MHz




1710–2170 MHz






Impedance 50 ohms

VSWR <1.5:1





IRT specifications:
















Min sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 16 16 16 dB 18 18 16 dB 18 18 18 dB 18 18 18 dB 18 18 18 dBaverage 18 20 18 dB 20 20 20 dB 20 22 20 dB 20 22 20 dB 20 22 20 dB

Cross polar ratioMain direction 0° 25 dB (typical) 20 dB (typical) 25 dB (typical) 30 dB (typical) 25 dB (typical)Sector ±60° >10 dB, 15 dB (avg) >10 dB, 12 dB (avg) >8 dB, 15 dB (avg) >10 dB, 15 dB (avg) >8 dB, 15 dB (avg)

Tracking, avg. 1 dB 1 dB 1.5 dB 1.5 dB 1.5 dB

Squint ±2.5° ±2.5° ±3° ±3° ±3°

1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 and viceversa with a vendor specific command. Start-up operation of the RCU 86010149 is possiblein an RET system supporting AISG 1.1 or supporting 3GPP/AISG 2.0 after performing alayer 2 reset before address assignment. The protocol can also be changed as follows: AISG1.1 to 3GPP: Enter "3GPP" into the additional data filed "Installer’s ID" and perform a layer7 reset or a power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield"Installer’s ID" and perform a layer 2 reset or a power reset. After switching the protocol anyother information can be entered into the "Installer’s ID" field.


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA4





800 10766



Dimensions 96 x 11.8 x 6 inches(2438 x 300 x 152 mm)




(2656 x 320 x 190 mm)

Shipping weight 71.6 lb (32.5 kg)

11.8 inches

(300 mm)

2.625 inches ± 0.125

(68 mm ± 4)

6 inches(152 mm)

Note: Refer to part number860 10149 for the

specifications of theremote control actuator.

This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interference

received, including interference that may causeundesired operation.

KATHREIN 860 10149

Tested To Comply

With FCC Standards

96 inches

(2438 mm)

97.6 inches

(2478 mm)

99.4 inches

(2525 mm)

698– 894–45

7-16

1710–2170+45

7-16

1710–2170–45

7-16

698– 894+45

7-16

iRCU outin

8pin male

8pin female

iRCU inout

8pin male


Order Information:

Model Description







65°

698–894 MHz1710–2170 MH

XX - POL

0° Electrical Down

840 10520, 840 1052

Specifications:

Frequency range 698–894 MHz1710–2170 MHz

Impedance 50 ohms

VSWR <1.5:1

Intermodulation (2x20w) IM3: <-150 dBc


Isolation intrasystem >30 dB

Weight 15.9 lb (7.2 kg)

Dimensions 23.3 x 10.6 x 6.2 inches(593 x 270 x 157 mm)


(100 N) / (80 N) / (180 N)


Shipping dimensions 29 x 11.9 x 7.6 inches(736 x 302 x 192 mm)


11241-B11203-FRO/b


Gain 10.5 dBi 11 dBi 13.3 dBi 13.5 dBi 12.8 dBi

Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)

Maximum input power 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C)


+45° and -45° polarization 37° (half-power) 31° (half-power) 19° (half-power) 18° (half-power) 18.5° (half-power)vertical beamwidth

Cross polar ratio (typical)Main direction 0° 30 dB 30 dB 25 dB 25 dB 25 dBSector ±60° >8 dB >8 dB >8 dB >8 dB >8 dB


Profile PA3

698–894 MHz



1710–2170 MHz



NE W

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30



Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar)Maximum input power 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C)


+45° and -45° polarization 37° (half-power) 34° (half-power) 19° (half-power) 18.5° (half-power) 18° (half-power)vertical beamwidth

Cross polar ratio (typical)Main direction 0° 30 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >8 dB >8 dB >8 dB

Integrated combiner *The insertion loss is included in the given antenna gain values


840 10520 Dualband Panel Antenna with Integrated Combiner

840 10525 Dualband Panel Antenna




840 10520, 840 10525

Mounting Equipment:

Model Description

2 x 738 546 Mounting Kit for 2 to 4.6 inch(optional) (50 to 115 mm) OD mast.

850 10013 Locking Tilt Mount Kit(optional) 0–34 degrees downtilt angle.


10.6 inches(270 mm)

26.7 inches(679 mm)

23.3 inches(593 mm)

25.2 inches(639 mm)

6.2 inches(157 mm)

2.625 inches ± 0.125(68 mm ± 4)

Layout of interface

698–894

1710–2170

–45°–45° +45° +45°

10.6 inches(270 mm)

26.7 inches(679 mm)

23.3 inches(593 mm)

25.2 inches(639 mm)

6.2 inches(157 mm)

2.625 inches ± 0.125(68 mm ± 4)

840 10525840 10520




85°

698–894 MHz1710–2170 MH

XX - POL



800 10721Dualband Panel AntennaXX- polarization

11226-F936.4127

698–894 MHz




1710–2170 MHz






Impedance 50 ohms

VSWR <1.5:1





IRT specifications:

















average 20 19 19 dB 22 20 20 dB 22 22 19 dB 22 22 22 dB 22 22 19 dBCross polar ratioMain direction 0° 20 dB (typical) 22 dB (typical) 15 dB (typical) 15 dB (typical) 15 dB (typical)Sector ±60° >10 dB, 14 dB (avg) >10 dB, 15 dB (avg) >10 dB, 12 dB (avg) >8 dB, 12 dB (avg) >10 dB, 12 dB (avg

Tracking, avg. 1.5 dB 1.5 dB 0.5 dB 0.5 dB 0.5 dB

Squint ±4.5° ±4.5° ±4° ±4° ±4°

1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG2.0 and vice versa with a vendor specific command. Start-up operation of the RCU86010149 is possible in an RET system supporting AISG 1.1 or supporting 3GPP/AISG2.0 after performing a layer 2 reset before address assignment. The protocol can alsobe changed as follows: AISG 1.1 to 3GPP: Enter "3GPP" into the additional data filed"Installer’s ID" and perform a layer 7 reset or a power reset. 3GPP to AISG 1.1: Enter"AISG 1" into the additional datafield "Installer’s ID" and perform a layer 2 reset or apower reset. After switching the protocol any other information can be entered into the"Installer’s ID" field.


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA4





800 10721


Weight 46.3 lb (21 kg)50.7 lb (23 kg) clamps included58.9 lb (26.7 kg) clamps and tilt kit included



(670 N / 250 N / 700 N)Mounting category M (Medium)


(1616 x 322 x 190 mm)

Shipping weight 55.1 lb (25 kg)


698– 894

–45

7-16

1710–2170

+45

7-16

1710–2170

–45

7-16

698– 894

+45

7-16

IRT outin

8pin male

8pin female

IRT inout

8pin male


11.8 inches

(300 mm)

2.625 inches ± 0.125

(68 mm ± 4)

6 inches

(152 mm)



This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may cause

undesired operation.

KATHREIN 860 10149

Tested To Comply

With FCC Standards

54.9 inches

(1394 mm)


57.6 inches

(1464 mm)

Order Information:

Model Description







800 10722

85°

698–894 MHz1710–2170 MH

XX - POL



11227-F936.4128

698–894 MHz




1710–2170 MHz






Impedance 50 ohms

VSWR <1.5:1





IRT specifications:














+45° and -45° polarization 12.1° (half-power) 11° (half-power) 5.5° (half-power) 5.5° (half-power) 5.5° (half-power)vertical beamwidth


Min sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 16 16 18 dB 15 18 18 dB 16 16 16 dB 16 16 16 dB 16 16 16 dBaverage 17 19 21 dB 16 19 22 dB 18 18 18 dB 17 17 18 dB 18 18 18 dB

Cross polar ratioMain direction 0° 22 dB (typical) 24 dB (typical) 18 dB (typical) 18 dB (typical) 18 dB (typical)Sector ±60° >10 dB, 16 dB (avg) >10 dB, 16 dB (avg) >10 dB, 12 dB (avg) >8 dB, 12 dB (avg) >10 dB, 12 dB(avg)


1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 andvice versa with a vendor specific command. Start-up operation of the RCU 86010149 ispossible in an RET system supporting AISG 1.1 or supporting 3GPP/AISG 2.0 after performinga layer 2 reset before address assignment. The protocol can also be changed as follows:AISG 1.1 to 3GPP: Enter "3GPP" into the additional data filed "Installer’s ID" and perform alayer 7 reset or a power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield"Installer’s ID" and perform a layer 2 reset or a power reset. After switching the protocol anyother information can be entered into the "Installer’s ID" field.


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA4





800 10722



Dimensions 72 x 11.8 x 6 inches(1828 x 300 x 152 mm)


(900 N / 330 N / 940 N)Mounting category H (Heavy)


(2050 x 322 x 190 mm)



698– 894

–45

7-16

1710–2170

+45

7-16

1710–2170

–45

7-16

698– 894

+45

7-16

IRT outin

8pin male

8pin female

IRT inout

8pin male


11.8 inches

(300 mm)

2.625 inches ± 0.125

(68 mm ± 4)

6 inches

(152 mm)





KATHREIN 860 10149

Tested To Comply

With FCC Standards

72 inches

(1828 mm)



Order Information:

Model Description






800 10723Dualband Panel AntennaXX- polarization

85°

698–894 MHz1710–2170 MH

XX - POL



11228-D936.4129

698–894 MHz




1710–2170 MHz






Impedance 50 ohms

VSWR <1.5:1





IRT specifications:
















Min sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T

first sidelobe above main beam 16 16 18 dB 15 18 18 dB 16 16 16 dB 16 16 16 dB 16 16 16 dBaverage 17 19 21 dB 16 19 22 dB 18 18 18 dB 17 17 18 dB 18 18 18 dB

Cross polar ratioMain direction 0° 22 dB (typical) 24 dB (typical) 18 dB (typical) 18 dB (typical) 18 dB (typical)Sector ±60° >10 dB, 16 dB (avg) >10 dB, 16 dB (avg) >10 dB, 12 dB (avg) >8 dB, 12 dB (avg) >10 dB, 12 dB(avg)


Squint ±4.0° ±4.0° ±4.5° ±4.5° ±4.5°

1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/AISG 2.0 and viceversa with a vendor specific command. Start-up operation of the RCU 86010149 is possiblein an RET system supporting AISG 1.1 or suppor ting 3GPP/AISG 2.0 after performing a layer2 reset before address assignment. The protocol can also be changed as follows: AISG 1.1 to3GPP: Enter "3GPP" into the additional data filed "Installer ’s ID" and perform a layer 7 reset ora power reset. 3GPP to AISG 1.1: Enter "AISG 1" into the additional datafield "Installer’s ID"and perform a layer 2 reset or a power reset. After switching the protocol any other informationcan be entered into the "Installer’s ID" field.

2) The tightning torque for fixing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). The

connector should be tightened by hand only!

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA4




800 10723Dualband Panel Antenna

XX- polarization







(2596 x 322 x 190 mm)


11.8 inches

(300 mm)

2.625 inches ± 0.125

(68 mm ± 4)

6 inches(152 mm)






KATHREIN 860 10149

Tested To Comply

With FCC Standards

698– 894–45

7-16

1710–2170+45

7-16

1710–2170–45

7-16

698– 894+45

7-16

iRCU outin

8pin male

8pin female

iRCU inout

8pin male


93.2 inches

(2368 mm)


96 inches

(2438 mm)

Order Information:

Model Description








VSWR <1.5:1

Impedance 50 ohms

Intermodulation (2x20w) IM3: < -150 dBc


Connector 2 x 7-16 DIN female

Isolation intrasystem >30 dBWeight 9.9 lb (4.5 kg)

14.3 lb (6.5 kg) clamps included





Shipping dimensions 14.8 x 11.3 x 6.5 inches(377 x 287 x 165 mm)


Integrated combiner The insertion loss is included in the given

antenna gain values.

Dualband Panel Antenna with Integrated CombinerXX- polarization

65°

806–960 MHz1710–2180 MH

XX - POLIntegrated Comb

0° Electrical Down

800 10454V0

Specifications: 806–866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz

Average gain 8.5 dBi 8.5 dBi 8.5 dBi 9.5 dBi 9.5 dBi 9.2 dBi

Front-to-back ratioCo-polar >25 dB >25 dB >25 dB >25 dB >25 dB >25 dBTotal power >20 dB >20 dB >22 dB >22 dB >22 dB >22 dB

+45° and -45° polarization 67° (half-power) 67° (half-power) 65° (half-power) 60° (half-power) 63° (half-power) 68° (half-power)horizontal beamwidth

+45° and -45° polarization 68° (half-power) 68° (half-power) 69° (half-power) 64° (half-power) 62° (half-power) 60° (half-power)vertical beamwidth

Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 20 dB (typical) 20 dB (typical) 19 dB (typical) 20 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB

Maximum input power 250 watts 100 watts(at 50°C)

Maximum input power 350 wattsper combined input(at 50°C)

11267-A936.3877/c

Profile PA1

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1710–2180 MHz



806–960 MHz







800 10454V01

C C

61-761-7

806–960–45

806–960+45

1710–2180–45

1710–2180+45

-45 +45

10.3 inches(262 mm)

14.3 inches(362 mm)

10.6 inches(270 mm)

12.7 inches(322 mm)

4.6 inches(116 mm)

2.625 inches ± 0.125(68 mm ± 4)

Mounting Equipment:

Model Description

2 x 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.

850 10013 Tilt Mount Kit(optional) 0–40 degrees downtilt angle.





65°

790–960 MHz1710–2170 MH

XX - POL

0° Electrical Down

742 226V01



VSWR <1.5:1

Impedance 50 ohms




Isolation intrasystem >30 dBintersystem >42 dB (790–960 // 1710–2170 MHz)

Weight 16.5 lb (7.5 kg)20.9 lb (9.5 kg) clamps included







11316-B936.3967/d


Gain 11.1 dBi 11.4 dBi 11.8 dBi 12.8 dBi 13.3 dBi 13.6 dBi

Front-to-back ratio (180° ± 30°) co-polar >23 dB >23 dB >25 dB >25 dB >25 dB >25 dBtotal power >20 dB >20 dB >22 dB >22 dB >22 dB >22 dB

Maximum power per input 250 watts (at 50°C) 250 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50°C) 200 watts (at 50+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power) 66° (half-power) 60° (half-power) 60° (half-power)horizontal beamwidth

+45° and -45° polarization 34° (half-power) 33° (half-power) 30° (half-power) 20° (half-power) 18° (half-power) 17.5° (half-powevertical beamwidth


Tracking, average 1 dB 0.5 dB

Squint ±3° ±1.5°

1710–2170 MHz



790–960 MHz



Profile PA2





742 226V01

22.8 inches(579 mm)

5.5 inches(139 mm)

26.4 inches(670 mm)

24.8 inches(630 mm)

10.3 inches(262 mm)

2.625 inches ± 0.125(68 mm ± 4)

790–960

1710–2170–45 +45

–45 +45

Mounting Equipment:

Model Description


850 10013 Locking Tilt Mount Kit(optional) 0–34 degrees downtilt angle.




Mounting Equipment:

Model Description




Dualband Panel Antenna with Integrated CombinerXX- polarization742 222V01

22.8 inches

(579 mm)

26.4 inches

(670 mm)

24.8 inches

(630 mm)

5.5 inches(139 mm)

2.625 inches ± 0.125(68 mm ± 4)

10.3 inches

(262 mm)




11335-A936.3950/a

65°

790–960 MHz1710–2180 MH

XX - POL


4°–12°, 4°–14°Remote Control Op

Profile PA2



Impedance 50 ohms

VSWR <1.5:1





Weight 61.2 lb (28 kg)66.1 lb (30.kg) clamps included







0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960 MHz




1710–2180 MHz




Specifications : 790–862 MHz 824–896 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz

Gain (average) 4° 8° 12° T 4° 8° 12° T 4° 8° 12° T 4° 9° 14° T 4° 9° 14° T 4° 9° 14° T(dbi) 16.8 16.7 16.6 17 16.8 16.8 17.2 17 16.8 17.8 18.1 17.5 18.3 18.3 17.8 18.7 18.7 18

Front-to-back ratio >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB

(180°±30°)Maximum input power 400 watts (per input) 250 watts (per input)

(at 50°C) 800 watts (total power) 500 watts (total power)

+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 66° (half-power) 66° (half-power) 64° (half-power) 61° (half-power)vertical beamwidth 7.5° (half-power) 7.4° (half-power) 7.2° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power

Electrical downtilt 4°–12° 4°–12° 4°–12° 4°–14° 4°–14° 4°–14°continuously adjustable (manual or optional remote control)

Sidelobe suppression for 4° 8° 12° T 4° 8° 12° T 4° 8° 12° T 4° 9° 14° T 4° 9° 14° T 4° 9° 14° Tfirst sidelobe above main beam 18 17 16 dB 19 18 18 dB 19 18 18 dB 20 18 16 dB 19 19 16 dB 18 18 18 dwithin 0°–20° sector above horizon 15 15 14 dB 16 15 14 dB 16 15 14 dB 17 17 15 dB 17 17 15 dB 17 17 15 d


800 10486VMounting Clamps Included



800 10486V01

Mounting Equipment:

Model Description





10.3 inches

(262 mm)


5.5 inches(139 mm)

102.6 inches(2607 mm)

101.1 inches(2567 mm)

2.625 inches ± 0.125(68 mm ± 4)

1710–2180

790–960

–45 +45

–45 +45

RCU790–960

RCU1710–2180

Layout of interface




11334-A936.3949/a

65°

790–960 MHz1710–2180 MH

XX - POL


2°–14°, 4°–14°Remote Control Op

Profile PA2



VSWR <1.5:1

Impedance 50 ohms





Weight 52.9 lb (24 kg)57.3 lb (26 kg) clamps included







790–960 MHz




1710–2180 MHz





Average gain (dBi) 2° 8° 14° T 2° 8° 14° T 2° 8° 14° T 4° 9° 14° T 4° 9° 14° T 4° 9° 14° T16.2 16 15.7 16.3 16.1 15.8 16.4 16.2 15.8 18 18.2 17.7 18.4 18.5 17.8 18.7 18.6 18

Front-to-back ratio >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB(180°±30°)

Maximum input power 790–960 MHz 1710–2180 MHzper input (at 50°C) 400 watts 250 watts

total (at 50°C) 800 watts 500 watts+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power) 66° (half-power) 64° (half-power) 60° (half-power)horizontal beamwidth

+45° and -45° polarization 10° (half-power) 9.7° (half-power) 9.3° (half-power) 5° (half-power) 4.7° (half-power) 4.5° (half-power)vertical beamwidth

Electrical downtilt 2°–14° 2°–14° 2°–14° 4°–14° 4°–14° 4°–14°continuously adjustable

Sidelobe suppression for 2° 8° 14° T 2° 8° 14° T 2° 8° 14° T 4° 9° 14° T 4° 9° 14° T 4° 9° 14° Tfirst sidelobe above main beam 17 17 15 dB 17 17 16 dB 17 17 16 dB 20 18 15 dB 19 18 15 dB 18 17 15 dB


800 10485V

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30




800 10485V01

Mounting Equipment:

Model Description





10.3 inches

(262 mm)

5.5 inches(139 mm)

2.625 inches ± 0.125(68 mm ± 4)

1710–2180

790–960

–45 +45

–45 +45

RCU790–960

RCU1710–2180

Layout of interface


80.2 inches

(2038 mm)





65°

790–960 MHz1710–2180 MH

XX-POL

Adjustable Electrical D0°–14°, 0°–8°

Remote Control Op

742 264V0



Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dBintersystem >45 dBintersystem Typ. >50 dB (790–960 // 1710–2180 MHz)

Weight 34.2 lb (15.5 kg)38.6 lb (17.5.kg) clamps included







11349-A936.3839/c







790–960 MHz 1710–2180 MHz0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Specifications : 790–862 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MH

Gain (average) 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 4° 8° T 0° 4° 8° T 0° 4° 8° (dbi) 14.1 14.1 13.7 14.3 14.2 13.8 14.5 14.4 13.9 17.1 17.3 17.1 17.2 17.4 17.1 17.3 17.5 17.2

Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >32 dB (co-polar) >32 dB (co-polar) >32 dB (co-po

Maximum input power 500 watts (per input) 250 watts (per input)(at 50°C) 1000 watts (total power) 500 watts (total power)

+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 65° (half-power) 62° (half-power) 61° (half-powervertical beamwidth 16.5° (half-power) 16° (half-power) 15.3° (half-power) 7.4° (half-power) 7.1° (half-power) 6.7° (half-powe


Sidelobe suppression for 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 4° 8° T 0° 4° 8° T 0° 4° 8° first sidelobe above main beam 17 16 15 dB 19 18 18 dB 17 18 17 dB 17 17 16 dB 15 15 15 dB 16 16 15 (average)


Tracking (average) 1 dB 0.5 dB

Squint ±2° ±3°

Profile PA5




742 264V02Dualband Panel Antenna

XX- polarization

10.3 inches(261 mm)


52.5 inches

(1334 mm)


2.625 inches ± 0.125

(68 mm ± 4)

5.7 inches

(146 mm)

Layout of interface

790–960 1710–2180

RCU1710–2180

RCU790–960

–45° –45°+45° +45°

Mounting Equipment:

Model Description






742 223V02Dualband Panel Antenna with Integrated CombinerXX- polarization

65°

790–960 MHz1710–2180 MH

XX-POLIntegrated Comb


Remote Control Op

790–960 MHz




1710–2180 MHz





Gain 0° 7° 14° T 0° 7° 14° T 0° 4° 8° T 0° 4° 8° T 0° 4° 8° T14.1 14.1 13.7 dBi 14.5 14.4 13.9 dBi 17.1 17.3 17.1 dBi 17.2 17.4 17.1 dBi 17.3 17.5 17.2

dBi



+45° and -45° polarization 16.5° (half-power) 15.3° (half-power) 7.4° (half-power) 7.1° (half-power) 6.7° (half-power)

vertical beamwidthElectrical downtilt 0°–14° 0°–14° 0°–8° 0°–8° 0°–8°continuously adjustable (manual or optional remote control)

Sidelobe suppression for 0° 7° 14° T 0° 7° 14° T 0° 4° 8° T 0° 4° 8° T 0° 4° 8° Tfirst sidelobe above main beam 17 16 15 dB 17 18 17 dB 17 17 16 dB 15 15 15 dB 16 16 15 dB

Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB

Maximum input power (at 50°C) 250 watts (790–960 MHz) 200 watts (1710–2180 MHz)per combined input 450 watts (790–960 MHz and 1710–2180 MHz)

Tracking, average 1.0 dB 0.5 dB

Squint ±2.0° ±3.0°



Impedance 50 ohms

VSWR <1.5:1












Integrated combiner The insertion loss is included in the givenantenna gain values.

11360-A936.3900/b

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA5




742 223V02Dualband Panel Antenna with Integrated Combiner

XX- polarization

55.3 inches

(1405 mm)



2.625 inches ± 0.125

(68 mm ± 4)

C C

7-16 7-16

790–960–45

790–960+45

1710–2180–45

1710–2180+45

5.7 inches(146 mm)

10.3 inches(261 mm)

Mounting Equipment:

Model Description






742 265V02

65°

790–960 MHz1710–2180 MH

XX-POL

Adjustable Electrical D0.5°–9.5°, 0°–6

Remote Control Op

790–960 MHz



0.5°–9.5° electrical downtilt

1710–2180 MHz







Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dBintersystem >45 dB (typical)intersystem >50 dB (790–960 // 1710–2180 MHz)








11350-B936.3782/d


Gain (average) 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T(dbi) 15.6 15.5 15.3 15.9 15.8 15.5 16.1 16.0 15.6 18.2 18.5 18.3 18.5 18.7 18.3 18.5 18.7 18.3

Front-to-back ratio >27 dB (co-polar) >28 dB (co-polar) >28 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-pola


+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 65° (half-power) 65° (half-power) 61° (half-power)vertical beamwidth 10.9° (half-power) 10.6° (half-power) 10° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power

Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5° 0°–6° 0°–6° 0°–6°continuously adjustable (manual or optional remote control)

Sidelobe suppression for 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tfirst sidelobe above main beam >15 16 17 dB >15 17 19 dB >15 18 19 dB >18 17 15 dB >18 18 16 dB >18 18 16 d(average)


Tracking (average) 1.5 dB 0.5 dB

Squint ±2.5° ±2.5°

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA5





XX- polarization

10.3 inches(261 mm)


76.1 inches

(1933 mm)

78.9 inches

(2005 mm)

2.625 inches ± 0.125

(68 mm ± 4)

5.7 inches

(146 mm)

Mounting Equipment:

Model Description




790–960+45

1710–2180–45

7-16 7-16

790– 960–45

7-16

1710–2180+45

7-16



742 224V0

65°

790–960 MHz1710–2180 MH



0.5°–9.5°, 0°–6

Remote Control Op




Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dBWeight 44.1 lb (20 kg)

48.1 lb (21.8 kg) clamps included







Integrated combiner The insertion loss is included in thegiven antenna gain values.

11361-A936.3860/d

790–960 MHz 1710–2180 MHz







Specifications: 790–862 MHz 880–960 MHz 1710–18 80 MHz 1850–1990 MHz 1900–2180 MHz

Gain 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T15.6 15.5 15.3 dBi 16.1 16 15.6 dBi 18.2 18.5 18.3 dBi 18.5 18.7 18.3 dBi 18.5 18.7 18.3 dB



+45° and -45° polarization 10.9° (half-power) 10° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power)vertical beamwidth

Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0°–6° 0°–6° 0°–6°continuously adjustable (manual or optional remote control)

Sidelobe suppression for first 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsidelobe above main beam avg >15 16 17 dB >15 18 19 dB >18 17 15 dB >18 18 16 dB >18 18 16 dB


Maximum input power (at 50°C)per input 250 watts (790–960 MHz) 200 watts (1710–2180 MHz)combined input 450 watts (790–960 MHz and 1710–2180 MHz)


Squint ±2.5° ±2.5°

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA5





XX- polarization

Mounting Equipment:

Model Description




78.9 inches

(2005 mm)

76.1 inches

(1933 mm)

77.4 inches

(1967 mm)

2.625 inches ± 0.125

(68 mm ± 4)

C C

7-16 7-16

790–960–45

790–960+45

1710–2180–45

1710–2180+45

5.7 inches(146 mm)

10.3 inches(261 mm)



742 266V0

65°

790–960 MHz1710–2180 MH

XX-POL


Remote Control Op

790–960 MHz




1710–2180 MHz







Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dBintersystem >45 dBintersystem Typ. >50 dB (790–960 // 1710–2180 MHz)








11351-B936.3785/c


Gain (average) 0° 3° 7° T 0° 3° 7° T 0° 3° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T(dbi) 16.6 16.6 16.5 17.0 16.9 16.7 17.0 17.1 16.9 18.2 18.5 18.3 18.5 18.7 18.3 18.5 18.7 18.3

Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)


+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 65° (half-power) 65° (half-power) 61° (half-power)vertical beamwidth 8° (half-power) 7.7° (half-power) 7.2° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power)


Sidelobe suppression for 0° 3° 7° T 0° 3° 7° T 0° 3° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tfirst sidelobe above main beam >17 17 15 dB >17 17 15 dB >18 17 15 dB >18 17 15 dB >18 18 16 dB >18 18 16 dB(average)


Tracking (average) 1 dB 0.5 dB

Squint ±2.5° ±2.5°

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA5





XX- polarization

10.3 inches

(261 mm)

101.1 inches

(2567 mm)

99.7 inches

(2533 mm)

102.6 inches

(2605 mm)

2.625 inches ± 0.125(68 mm ± 4)

5.7 inches

(146 mm)

Mounting Equipment:

Model Description


850 10007 Tilt Mount Kit(optional) 0–8 Degrees downtilt angle.


790–960–45

790–960+45

7-16 7-16

1710–2180–45

7-16

1710–2180+45

7-16



742 225V0

65°

790–960 MHz1710–2180 MH



0°–7°, 0°–6°

Remote Control Op




Impedance 50 ohms

VSWR <1.5:1





Weight 52.9 lb (24 kg)56.9 lb (25.8.kg) clamps included







Integrated combiner The insertion loss is included in thegiven antenna gain values.

11362-A936.3861/c

790–960 MHz 1710–2180 MHz

Horizontal pattern

±45°- polarization

Vertical pattern

±45°- polarization0°–7° electrical downtilt

Horizontal pattern


Vertical pattern


Profile PA2


Gain 0° 3° 7° T 0° 3° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T16.6 16.6 16.5 dBi 17 17.1 16.9 dBi 18.2 18.5 18.3 dBi 18.5 18.7 18.3 dBi 18.5 18.7 18.3

dBi



+45° and -45° polarization 7.7° (half-power) 7.2° (half-power) 5° (half-power) 4.8° (half-power) 4.6° (half-power)vertical beamwidth

Electrical downtilt 0°–7° 0°–7° 0°–6° 0°–6° 0°–6°continuously adjustable (manual or optional remote control)

Sidelobe suppression for first 0° 4° 7° T 0° 4° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsidelobe above main beam avg >17 17 15 dB >18 17 15 dB >18 17 15 dB >18 18 16 dB >18 18 16 dB


Maximum input power (at 50°C)per input 250 watts (790–960 MHz) 200 watts (1710–2180 MHz)combined input 450 watts (790–960 MHz and 1710–2180 MHz)


Squint ±2.5° ±2.5°

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA5




Mounting Equipment:

Model Description





XX- polarization

102.6 inches

(2605 mm)


101.1 inches(2567 mm)

2.625 inches ± 0.125

(68 mm ± 4)

C C

7-16 7-16

790–960–45

790–960+45

1710–2180–45

1710–2180+45

5.7 inches(146 mm)

10.3 inches(261 mm)



800 10665

65°

790–960 MHz1710–2690 MH

XX-POL


Remote Control Op




Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dB (790–960 MHz)intrasystem >28 dB (1710–2690 MHz)intersystem >30 dB (790–960 // 1710–2690 MHz)

11312-A936.3955

790–960 MHz 1710–2690 MHz







Specifications: 790–866 MHz 824–896 MHz 880–960 MHz

Average gain (dBi) 16 16 15.5 16.1 16.1 15.6 16 16.2 15.6Tilt 0° 5° 10° 0° 5° 10° 0° 5° 10°

Front-to-back ratio >27 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar)(180°±30°)

Maximum input power 500 watts (per input)(at 50°C) 1000 watts (total power)

+45° and -45° polarization 68° (half-power) 67° (half-power) 65° (half-power)horizontal beamwidth

+45° and -45° polarization 10.3° (half-power) 10.1° (half-power) 9.8° (half-power)vertical beamwidth

Electrical downtilt 0°–10° 0°–10° 0°–10°

continuously adjustable(manual or optional remote control)

Min. suppression for first 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tsidelobe above main beam 18 17 15 dB 18 18 16 dB 18 18 16 dB

Cross polar ratio (typical)Main direction 0° 22 dB 22 dB 22 dBSector ±60° >10 dB >10 dB >13 dB

Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2490–2690 MHz

Average gain (dBi) 18.5 18.4 18.1 18.5 18.4 18.1 18.8 18.7 18.2 18.2 18.3 18Tilt 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°

Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)(180°±30°)


+45° and -45° polarization 62° (half-power) 63° (half-power) 62° (half-power) 63 ° (half-power)horizontal beamwidth

+45° and -45° polarization 4.5° (half-power) 4.4° (half-power) 4.1° (half-power) 3.5° (half-power)vertical beamwidth

Electrical downtilt 0°–6° 0°–6° 0°–6° 0°–6°continuously adjustable(manual or optional remote control)

Min. suppression for first 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsidelobe above main beam 17 16 16 dB 18 18 17 dB 18 17 17 dB 18 18 17 dB

Cross polar ratio (typical)Main direction 0° 18 dB 22 dB 23 dB 25 dBSector ±60° >10 dB >10 dB >10 dB >10 dB

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

NE W

Profile PA4




Mounting Equipment:

Model Description





XX- polarization

11.8 inches(300 mm)


2.625 inches ± 0.125(68 mm ± 4)

6 inches(152 mm)











Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm)OD masts are included.

Layout of interface

790–960 1710–2690

RCU1710–2690

RCU790–960

–45° –45°+45° +45°



800 10666

65°

790–960 MHz1710–2690 MH

XX-POL

Adjustable Electrical D0.5°–9.5°, 0°–6

Remote Control Op


11372-A936.4069

790–960 MHz 1710–2690 MHz







10

3

0

B d

B d

10

3

10

3

0

B d

B d

10

3



Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dB (790–960 MHz) intrasystem >28 dB (1710–2690 MHz) intersystem >30 dB (790–960 // 1710–2690 MHz)


Average gain (dBi) 16.8 16.7 16.5 17 17 16.8 17.1 17.2 17Tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°





Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°


Min. suppression for first 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° Tsidelobe above main beam 18 16 14 dB 18 17 15 dB 18 18 18 dB



Average gain (dBi) 18.5 18.4 18.1 18.5 18.4 18.1 18.8 18.7 18.2 18.2 18.3 18Tilt 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°







Front-to-back ratio (copolar) >25 dB >25 dB >25 dB >25 dB


NE W

Profile PA4




Mounting Equipment:

Model Description





XX- polarization

11.8 inches(300 mm)

103.2 inches(2622 mm)

2.625 inches ± 0.125(68 mm ± 4)

6 inches(152 mm)

104.4 inches(2652 mm)

106 inches(2692 mm)










7-16 7-16

790–960

–45°

790–960

+45°

1710–2690

–45°

1710–2690

+45°

7-16 7-16



Tripleband Panel AntennaXXX- polarization

800 10290V0

11328-B936.3930/a

65°

806–960 MHz1710–2180 MH1710–2180 MH

XXX - POL

Adjustable Electrical D0°–14°, 0°–14°, 0°–

Remote Control Op

Profile PA3



Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dBintersystem >35 dB (806–960 // 1710–2180 MHz)intersystem >30 dB (1710–2180 // 1710–2180 MHz)








806–960 MHz




1710–2180 MHz




806–866 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz

Gain tilt 0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 7° 14° 0° 7° 14(dbi) 14.4 14.3 14 14.6 14.4 14.2 14.9 14.7 14.4 bottom 14.5 14.5 14.2 14.8 14.8 14.5 15.1 14.8 14

top 14 14 13.7 14.4 14.3 13.9 14.9 14.8 14

Front-to-back ratio (180°±30°) >25 dB >25 dB >25 dB >25 dB >25 dB >25 dBMaximum input power 400 watts 400 watts 400 watts 250 watts 250 watts 250 watts

per input (at 50°C)

+45° and -45° polarizationhorizontal beamwidth 69° (half-power) 68° (half-power) 67° (half-power) 67° (half-power) 63° (half-power) 60° (half-power)vertical beamwidth 14.7° (half-power) 14.3° (half-power) 13.9° (half-power) 13.8° (half-power) 13.2° (half-power) 12.6° (half-powe

Electrical downtilt 0°–14° 0°–14° 0°–14° bottom 0°–14° 0°–14° 0°–14°continuously adjustable top 0°–14° 0°–14° 0°–14°

Sidelobe suppression for 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° Tfirst sidelobe above main beam 18 16 16 dB 18 16 16 dB 18 17 16 dB 18 16 15 dB 18 17 17 dB 18 16 17 d

Cross polar ratio (typical)Main direction 0° 25 dB 25 dB 25 dB 20 dB 20 dB 20 dBSector ±60° >10 dB >10 dB >10 dB >10 dB >10 dB >10 dB

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30




800 10290V01

Mounting Equipment:

Model Description




Tripleband Panel AntennaXXX- polarization

10.3 inches(262 mm)


5.9 inches(149 mm)



2.625 inches ± 0.125(68 mm ± 4)


–45 –45

RCU

1710–2180 top system

1710–2180

790–960

RCURCU

–45 +45+45 +45

bottom system

Layout of interface









790–960 MHz


1710–1990 MHz



1920–2180 MHz

800 10291V0Tripleband Panel AntennaXXX- polarization

65°

790–960 MHz1710–2180 MH1710–2180 MH

XXX-POL


Remote Control Op

Profile PA3



Impedance 50 ohms

VSWR <1.5:1





>30 dB (1710–2180 // 1710–2180 MHz)


Dimensions 81 x 10.3 x 5.9 inches(2058 x 262 x 149 mm)





11355-B936.3881/b


Average gain (dbi) 2° 8° 14° T 2° 8° 14° T 2° 8° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T16.2 16 15.7 16.3 16.1 15.8 16.4 16.2 15.8 syst 1 15.9 15.9 15.5 16.2 16.2 15.7 16.3 16.3 15.8

syst 2 15.8 15.8 15.4 16.1 16.1 15.4 16.3 16.2 15.5

Front-to-back ratio >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB(180°±30)

Maximum input power 400 watts 400 watts 400 watts 250 watts 250 watts 250 wattsper input (at 50°C)

+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 65° (half-power) 64° (half-power) 60° (half-power)vertical beamwidth 10° (half-power) 9.7° (half-power) 9.3° (half-power) 9.5° (half-power) 9° (half-power) 8.7° (half-power)


Sidelobe suppression forfirst sidelobe 2° 8° 14° T 2° 8° 14° T 2° 8° 14° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° Tabove main beam (dB) 17 17 15 17 17 16 17 17 16 18 17 17 18 17 17 18 17 17


Tracking 1.0 dB 1.0 dB

0

3

0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3

0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3

0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3

0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0

0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30




Mounting Equipment:

Model Description




800 10291V02Tripleband Panel Antenna

XXX- polarization

10.3 inches

(262 mm)

81 inches(2058 mm)

5.9 inches

(149 mm)



2.625 inches ± 0.125(68 mm ± 4)

–45 –45

RCU


1710–2180

790–960

RCURCU

–45 +45+45 +45

bottom system

Layout of interface



800 10492VTripleband Panel AntennaXXX- polarization

65°

790–960 MHz1710–2180 MH1710–2180 MH

XXX-POL


Remote Control Op

Profile PA3



Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dBintersystem >36 dB (790–960 // 1710–2180 MHz)intersystem >36 dB (1710–2180 // 1710–2180 MHz)

Weight 75 lb (34 kg)79.4 lb (36 kg) clamps included





Shipping dimensions 119.2 x 12 x 8 inches(3027 x 304 x 204 mm)

Shipping weight 86 lb (39 kg)

11336-B936.3952/a

1710–2180 MHz

Horizontal pattern


Vertical pattern


790–960 MHz





Gain (average) 4° 8° 12° T 4° 8° 12° T 4° 8° 12° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° T(dbi) 16.6 16.5 16.3 17 16.9 16.5 17.2 17 16.7 bottom 16.1 16.3 16 16.7 16.8 16.3 17 17 16.6

top 16.1 16.1 15.8 16.7 16.5 16.2 17 16.9 16.4

Front-to-back ratio >25 dB >25 dB >25 dB >25 dB >25 dB >25 dB(180°±30°)


+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 66° (half-power) 65° (half-power) 63° (half-power) 60° (half-power)vertical beamwidth 7.5° (half-power) 7.4° (half-power) 7.2° (half-power) 7.8° (half-power) 7.6° (half-power) 7.2° (half-power)


Sidelobe suppression for 4° 8° 12° T 4° 8° 12° T 4° 8° 12° T 0° 7° 14° T 0° 7° 14° T 0° 7° 14° Tfirst sidelobe above main beam 19 17 16 dB 19 18 18 dB 19 18 18 dB 18 17 15 dB 18 17 15 dB 18 17 15 dBwithin 0°–20° sector above horizon 15 15 14 dB 16 15 14 dB 16 15 14 dB 18 17 15 dB 17 17 15 dB 15 14 14 dB


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30




10.3 inches(262 mm)

106.1 inches(2694 mm)

5.9 inches(149 mm)

109.3 inches(2777 mm)

107.8 inches(2737 mm)

2.625 inches ± 0.125(68 mm ± 4)

114 inches(2896 mm)

Mounting Equipment:

Model Description





XXX- polarization

–45 –45

RCU


1710–2180

790–960

RCURCU

–45 +45+45 +45

bottom system

Layout of interface






1710–2180 MHz




790–960 MHz

800 10292V0Tripleband Panel AntennaXXX- polarization

65°

790–960 MHz1710–2180 MH1710–2180 MH

XXX-POL

Adjustable Electrical D2.5°–9.5°, 0°–10°, 0

Remote Control Op

Profile PA3



Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dBintersystem >36 dB (790–960 // 1710–2180 MHz)>36 dB (1710–2180 // 1710–2180 MHz)







11346-B936.3802/b

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30


Gain (dbi) 2.5° 6° 9.5° T 2.5° 6° 9.5° T 2.5° 6° 9.5° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T16.8 17.0 16.8 17.0 17.1 17.0 17.4 17.4 17.1 syst 1 16.5 16.7 16.5 17.0 17.1 16.7 17.3 17.4 16.8

syst 2 16.2 16.3 16.1 16.7 16.7 16.4 17.0 17.0 16.5

Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar) >26 dB (co-polar) >26 dB (co-polar) >26 dB (co-polar


+45° and -45° polarizationhorizontal beamwidth 69° (half-power) 68° (half-power) 66° (half-power) 65° (half-power) 64° (half-power) 60° (half-power)vertical beamwidth 7.8° (half-power) 7.6° (half-power) 7.1° (half-power) 7.4° (half-power) 7.2° (half-power) 6.8° (half-power)

Electrical downtilt 2.5°–9.5° 2.5°–9.5° 2.5°–9.5° 0°–10° 0°–10° 0°–10°continuously adjustable (manual or optional remote control)

Sidelobe suppression for 1st 2.5° 6° 9.5° T 2.5° 6° 9.5° T 2.5° 6° 9.5° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tsidelobe above main beam 17 16 14 dB 17 16 14 dB 17 16 14 dB 16 16 16 dB 16 17 16 dB 16 16 14 dB


±60° 20 dB average 20 dB average 17 dB average 14 dB average 16 dB average 16 dB average

Tracking (average) 1.0 dB syst 1 1.0 dBsyst 2 0.5 dB

Squint ±3.5° ±3.5°




Mounting Equipment:

Model Description





XXX- polarization

106.1 inches(2694 mm)

5.9 inches(149 mm)

109.3 inches(2777 mm)

107.8 inches(2737 mm)

2.625 inches ± 0.125(68 mm ± 4)

10.3 inches(262 mm)

–45 +45

RCU

1710–21801710–2180

790–960

RCURCU

–45 +45–45 +45

bottom system 1top system 2

Layout of interface



800 10675Tripleband Panel AntennaXXX- polarization

65°

790–960 MHz1710–2170 MH2490–2690 MH

XXX-POL


Remote Control Op

11370-A936.3879/b

Specifications : 790–862 MHz 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz 2490–2690 MH

Gain tilt 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°(dbi) 16 16 15.5 16.1 16.1 15.6 16 16.2 15.6 18 18 17.6 18 18 17.5 18.1 18.1 17.4 17.8 17.8 17.

Front-to-back ratio (180°±30°) >27 dB (co-polar) >27 dB (co-polar) >27 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-pola

Maximum input powerper input (at 50°C) 500 watts 500 watts 500 watts 200 watts 200 watts 200 watts 200 wattstotal (at 50°C) 1000 watts 400 watts 400 watts

+45° and -45° polarizationhorizontal beamwidth 68° (half-power) 67° (half-power) 65° (half-power) 62° (half-power) 63° (half-power) 62° (half-power) 63° (half-powevertical beamwidth 10.3° (half-power) 10.1° (half-power) 9.8° (half-power) 4.8° (half-power) 4.6° (half-power) 4.4° (half-power) 3.5° (half-powe

Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–6° 0°–6° 0°–6° 0°–6°continuously adjustable

Sidelobe suppression forfirst sidelobe above main beam 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°

dB 18 17 15 18 18 16 18 18 16 18 16 16 18 18 17 18 17 17 18 18 18

Cross polar ratio (typical)Main direction 0° (dB) 22 22 22 18 22 23 25Sector ±60° (dB) >10 dB >10 dB >10 dB >10 >10 >10 >10

Isolation intrasystem >30 dB >28 dB >28 dBintersystem >35 dB (790–960 // 1710–2170 // 2490–2690 MHz)


Frequency range 790–960 MHz1710–2170 MHz2490–2690 MHz

Impedance 50 ohms

VSWR <1.5:1











1710–2170 MHz




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

2490–2690 MHz




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960 MHz




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

NE W

Profile PA4




Mounting Equipment:

Model Description




800 10675Tripleband Panel Antenna

XXX- polarization

11.8 inches(300 mm)


6 inches

(152 mm)



2.625 inches ± 0.125(68 mm ± 4)

790–960+45

2490–2690–45

7-16 7-16

790–960–45

7-16

2490–2690+45

7-16

1710–2170–45

7-16

1710–2170+45

7-16




65°

790–960 MHz1710–2690 MH1710–2690 MH

XXX-POL


Remote Control Op

11314-FRO936.A2779/b

1710–2690 MHz




790–960 MHz




10

3

0

B d

B d

10

3

10

3

0

B d d

B

10

3

0



Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dB (790–960 MHz)

>28 dB (1710–2690 MHz) intersystem >40 dB (790–960 // 1710–2690 MHz)

>30 dB (1710–2690 // 1710–2690 MHz)


Average gain (dBi) tilt 2° 5° 10° 2° 5° 10° 2° 5° 10°16.6 16.6 16.5 16.9 17 16.8 17.3 17.4 17.2

Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)



+45° and -45° polarization 7.5° (half-power) 7.3° (half-power) 7° (half-power)vertical beamwidth

Electrical downtilt 2°–10° 2°–10° 2°–10°


Min. suppression for first 2° 5° 10° T 2° 5° 10° T 2° 5° 10° Tsidelobe above main beam 18 16 14 dB 18 16 15 dB 18 17 16 dB

Front-to-back ratio (copolar) >25 dB >25 dB >25 dB



Average gain (dBi) tilt 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°bottom system 17 16.8 16.5 17.5 17.3 17 17.7 17.5 17.2 17.5 17.2 17top system 16.6 16.4 16.1 17.1 16.9 16.6 17.3 17.1 16.8 17 16.7 16.5

Front-to-back ratio >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar) >25 dB (co-polar)

Maximum input power 200 watts (per input)

(at 50°C) 400 watts (total power)+45° and -45° polarization 67° (half-power) 65° (half-power) 63° (half-power) 62° (half-power)horizontal beamwidth



Min. suppression for first 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T

sidelobe above main beam 16 16 15 dB 16 16 15 dB 16 16 15 dB 16 16 15 dB

Front-to-back ratio (copolar) >25 dB >25 dB >25 dB >25 dB


NE W

Profile PA4




Mounting Equipment:

Model Description





XXX- polarization

11.8 inches(299 mm)

102.4 inches(2593 mm)

2.625 inches ± 0.125(68 mm ± 4)

6 inches

(152 mm)

103.4 inches

(2627 mm)

105 inches

(2667 mm)


Weight 72.8 lb (33 kg)76.7 lb (34.8 kg) clamps included





(2892 x 330 x 192 mm)



1710–2690+45

1710–2690–45

7-16 7-16

1710–2690–45

7-16

1710–2690+45

7-16

790– 960–45

7-16

790–960+45

7-16




65°

790–960 MHz1710–2170 MH2490–2690 MH

XXX-POL


Remote Control Op

11373-A936.4045


Frequency range 790–960 MHz // 1710–2170 MHz // 2490–2690 MHz

Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dB (790–960 MHz)

intrasystem >28 dB (1710–2170 MHz) (2490–2690 MHz)intersystem >30 dB (790–960 // 1710–2690 MHz // 2490–2690 MHz)

1710–2690 MHz




790–960 MHz





Average gain (dBi) 16.8 16.7 16.5 17 17 16.8 17.1 17.2 17Tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°





Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°


Min. suppression for first 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° Tsidelobe above main beam 18 16 14 dB 18 17 15 dB 18 18 16 dB



Average gain (dBi) 18 16 16 18 18 17 18 17 17 18 18 18Tilt 0° 3° 6° 0° 3° 6° 0° 3° 6° 0° 3° 6°








NE W

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3

0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3

0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA4




Mounting Equipment:

Model Description





XXX- polarization

11.8 inches

(300 mm)

103.2 inches

(2622 mm)

2.625 inches ± 0.125(68 mm ± 4)

6 inches

(152 mm)

104.4 inches(2652 mm)

106 inches(2692 mm)












88°

790–960 MHz1710–2180 MH

XX-POL

Adjustable Electrical D0.5°–12.5°, 0.5°–

Remote Control Op

800 10121V


Frequency range 790–960 MHz / 1710–2180 MHz

VSWR <1.5:1

Impedance 50 ohms












11356-B936.3959/a

790–960 MHz




1710–2180 MHz



0.5°–10° electrical downtilt



Average gain (dBi) 13.4 13.4 13.1 13.6 13.6 13.4 13.9 13.8 13.5 16.4 16.4 16.2 16.4 16.5 16 16.4 15.9 15.3Tilt 0.5° 6° 12° 0.5° 6° 12° 0.5° 6° 12° 0.5° 5° 10° 0.5° 5° 10° 0.5° 5° 10°


Maximum input powerper input (at 50°C) 500 watts 500 watts 500 watts 250 watts 250 watts 250 wattstotal power 1000 watts 500 watts


+45° and -45° polarization 15° (half-power) 14.5° (half-power) 14° (half-power) 7° (half-power) 6.6° (half-power) 6.4° (half-powervertical beamwidth

Electrical downtilt 0.5°–12.5° 0.5°–12.5° 0.5°–12.5° 0.5°–10° 0.5°–10° 0.5°–10°continuously adjustable(manual or optional remote control)

Min. sidelobe suppressionfor first sidelobe 0.5° 6° 12° T 0.5° 6° 12° T 0.5° 6° 12° T 0.5° 5° 10° T 0.5° 5° 10° T 0.5° 5° 10° Tabove main beam 16 14 14 dB 16 15 14 dB 18 16 16 dB 17 17 16 dB 17 18 16 dB 18 16 16 dBaverage 20 19 16 dB 20 18 17 dB 22 20 20 dB 20 20 18 dB 21 22 17 dB 20 20 16 dB

Front-to-back ratio (copolar) >23 dB >23 dB >23 dB >23 dB >23 dB >23 dB

Cross polar ratio (typical)Main direction 0° 17 dB 18 dB 20 dB 17 dB 16 dB 15 dBSector ±60° >10 dB >10 dB >13 dB >10 dB >12 dB >10 dBaverage ±60° 16 dB 16 dB 19 dB 17 dB 19 dB 19 dB

Profile PA3

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30




Mounting Equipment:

Model Description





XX- polarization

10.3 inches

(262 mm)

57.8 inches

(1467 mm)

54.5 inches

(1384 mm)

56.2 inches

(1427 mm)

5.9 inches

(149 mm)

2.625 inches ± 0.125

(68 mm ± 4)

RCU790–960

790–960

1710–2180

RCU1710–2180

Layout of interface

–45° +45°

–45° +45°




Average gain (dBi) 14.8 14.8 14.8 14.8 15 14.8 14.9 15.1 14.9 17.7 17.8 17.7 17.7 18 17.6 17.6 17.8 17.4Tilt 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 3° 6° 0° 3° 6° 0° 3° 6°

Front-to-back ratio (180°±30°) >23 dB >23 dB >23 dB >23 dB >23 dB >23 dB

Maximum input power (at 50°C)per input 500 watts 500 watts 500 watts 250 watts 250 watts 250 wattstotal 1000 watts 500 watts


+45° and -45° polarization 11° (half-power) 10.9° (half-power) 10.5° (half-power) 5.5° (half-power) 5.2° (half-power) 5° (half-power)vertical beamwidth

Electrical downtilt 0°–10° 0°–10° 0°–10° 0°–6° 0°–6° 0°–6°continuously adjustable(manual or optional remote control)

Min. sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T1st sidelobe above main beam 18 16 14 dB 16 16 15 dB 16 16 15 dB 18 18 16 dB 18 18 16 dB 18 18 16 dB




Impedance 50 ohms

VSWR <1.5:1












88°

790–960 MHz1710–2180 MH

XX-POL


Remote Control Op

800 10122V

790–960 MHz




1710–2180 MHz





11359-A936.3960/b

Profile PA3

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30




Mounting Equipment:

Model Description





XX- polarization

10.3 inches(262 mm)




5.9 inches(149 mm)

2.625 inches ± 0.125(68 mm ± 4)

RCU790–960

790–960

1710–2180

RCU1710–2180

Layout of interface

–45° +45°

–45° +45°



800 10123V

88°

790–960 MHz1710–2180 MH

XX-POL

Adjustable Electrical D0.5°–7°, 0°–6°

Remote Control Op


Profile PA3



Impedance 50 ohms

VSWR <1.5:1




Isolation intrasystem >30 dBintersystem >45 dB (790 –960 // 1710–2180 MHz)

Weight 72.8 lb (33 kg)76.7 lb (34.8.kg) clamps included






1710–2180 MHz






0.5°–7° electrical downtilt

790–960 MHz


Average gain (dBi) 16.1 16.2 16.1 16.3 16.4 16.3 16.5 16.6 16.5 17.8 17.7 17.4 18 17.9 17.4 17.9 17.8 17.3Tilt 0.5° 4° 7° 0.5° 4° 7° 0.5° 4° 7° 0° 3° 6° 0° 3° 6° 0° 3° 6°



+45° and -45° polarization 7.3° (half-power) 7.2° (half-power) 6.9° (half-power) 4.8° (half-power) 4.5° (half-power) 4.2° (half-power

vertical beamwidthElectrical downtilt 0.5°–7° 0.5°–7° 0.5°–7° 0°–6° 0°–6° 0°–6°continuously adjustable(manual or optional remote control)

Vertical Pattern–Min. sidelobe 0.5° 4° 7° T 0.5° 4° 7° T 0.5° 4° 7° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° Tsuppression for first 15 14 14 dB 15 14 14 dB 15 14 15 dB 18 17 16 dB 18 17 17 dB 18 16 17 dBsidelobe above main beam


Maximum input power 806–960 MHz 1710–2180 MHzper input (at 50°C) 500 watts 250 wattstotal (at 50°C) 1000 watts 500 watts


Squint ±3° ±3°

11363-A936.4017/a

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PA3




Mounting Equipment:

Model Description





XX- polarization

10.3 inches(262 mm)

107 inches(2717 mm)

103.7 inches(2635 mm)

105.4 inches

(2677 mm)

5.9 inches(149 mm)

2.625 inches ± 0.125(68 mm ± 4)

RCU790–960

790–960

1710–2180

RCU1710–2180

Layout of interface

–45° +45°

–45° +45°



Dualband Panel Antenna with Integrated CombinerV- polarization

742 290

90°

824–960 MHz1710–2170 MH

V-POL

Integrated Comb

0° Electrical Down



VSWR824–960 MHz <1.7:1870–960 MHz <1.5:11710–2170 MHz <1.7:11710–1990 MHz <1.5:1

Gain 7 dBi

Impedance 50 ohms


Polarization Vertical / Vertical

Front-to-back ratio824–960 MHz >18 dB1710–2170 MHz >20 dB

Maximum input power 100 watts (at 50°C)

H-plane beamwidth824–960 MHz 90 degrees (half-power)1710–2170 MHz 82 degrees (half-power)

E-plane beamwidth824–960 MHz 60 degrees (half-power)1710–2170 MHz 70 degrees (half-power)



Dimensions 12.9 x 6.1 x 2.7 inches

(328 x 155 x 69 mm)Wind load at 93 mph (150kph)Front/Side/Rear 21 lbf / 6 lbf / 23 lbf

(90 N / 23 N / 100 N)




10779-E936.2424/c

824–960 MHz

1710–2170 MHz

H - PlaneHorizontal pattern

Vertical - polarization

E - PlaneVertical pattern


824-960VPol

1710-2170

VPol

7-16

C

12.9 inches(328 mm)

15 inches(382 mm)

6.1 inches(155 mm)

16.2 inches(412 mm)

2.7 inches

(69 mm)





Profile PF5

Mounting Equipment:

Model Description





Dualband Panel Antenna with Integrated CombinerV- polarization

800 10046



VSWR824–960 MHz <1.7:1870–960 MHz <1.5:11710–2170 MHz <1.5:1

Gain824–960 MHz 10 dBi1710–2170 MHz 11 dBi

Impedance 50 ohmsIntermodulation (2x20w) IM3: <-150 dBc

Polarization Vertical / Vertical

Front-to-back ratio824–960 MHz >18 dB1710–2170 MHz >20 dB


H-plane beamwidth824–960 MHz 90 degrees (half-power)1710–2170 MHz 82 degrees (half-power)



Weight 11 lb (5 kg)



(175 N / 47 N / 200 N)



10780-E936.2500/c

824-960

VPol1710-2170

VPol

7-16

C

1710–2170 MHz





824–960 MHz





90°

824–960 MHz1710–2170 MHz

V-POL

0° Electrical Downtilt

Profile PF5

6.1 inches(155 mm)

26.1 inches

(662 mm)

29.4 inches(746 mm)

2.7 inches(69 mm)

28.2 inches(716 mm)

2.5 inches

(64 mm)

Mounting Equipment:

Model Description





Dualband 700 MHz Trisector AntennaXX- polarization with or without Integrated Combiner

840 10515, 840 1051

840 10517, 840 1051General specifications:


VSWR <1.5:1

Impedance 50 ohms


Polarization +45° upper and lower band-45° upper and lower band



Combiner With or without integrated combiner

Radome color Brown or grey

Weight 50 lb (22.7 kg)

Height 24 inches (609 mm)

Radome diameter 16 inches (407 mm)

Wind load at 93 mph (150kph)Side 32 lbf (138 N)


Shipping dimensions 32 x 20 x 19 inches(813 x 508 x 483 mm)


698–960 MHz



1710–2170 MHz



Specifications : 698–806 MHz 806–894 MHz 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz


Front-to-back ratio >24 dB (co-polar) >26 dB (co-polar) >32 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)(180° ± 30°) >18 dB (total power) >20 dB (total power) >24 dB (total power) >26 dB (total power) >25 dB (total power)



+45° and -45° polarization 37° (half-power) 31° (half-power) 19° (half-power) 17.5° (half-power) 17.5° (half-power)vertical beamwidth

Cross polar ratioMain direction 0° 18 dB 25 dB 20 dB 22 dB 25 dBSector (typical) ±60° >8 dB >8 dB >9 dB >9 dB >12 dB

11204-C

698–894 MHz1710–2170 MH

XX-POL

0° Electrical Down

24 inches(609 mm)

26.8 inches(682 mm)

Arrows indicate the direction

of maximum signal strength

Mounting Equipment:

Designed to be mounted on top of a utilitypole using a custom mounting bracket

supplied by the customer.

13.9 inches(353 mm)

16 inches(407 mm)

Order Information:Model Description

840 10515 Brown Trisector Antenna

840 10516 Grey Trisector Antenna

840 10517 Brown Trisector Antenna with Combiner

840 10518 Grey Trisector Antenna with Combiner

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3

3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3

3 0

3020163 61020

3

6

10

20

BdBd

dB

%

NE W



Dualband 700 MHz Omnidirectional Antennawith or without Integrated Combiner X- polarization

840 10510, 840 10511

840 10512, 840 10513Omnidirectional

698–894 MHz1710–2170 MHz

X-POL




VSWR <1.5:1

Impedance 50 ohms



Connector 2 or 4 x 7-16 DIN female (long neck)











11202-D

698–894 MHz

1710–2170 MHz


880 MHz


880 MHz


1945 MHz


1945 MHz

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

24 inches(609 mm)

26.8 inches(682 mm)

13.9 inches(353 mm)

16 inches(407 mm)



Order Information:

Model Description

840 10510 Brown Omni Antenna

840 10511 Grey Omni Antenna

840 10512 Brown Omni Antenna with Combiner

840 10513 Grey Omni Antenna with Combiner


Gain (typical) 4.5 dBi 6.5 dBi 9 dBi 9 dBi 8.5 dBi



Mounting Equipment:

Designed to be mounted on top of autility pole using a custom mountingbracket supplied by the customer.

NE W




30° 806–960 MHz 18.5 dBi 800 10141 0° +45° and -45° 51 inches 82

790–960 MHz 20.2 dBi 800 10643 0°– 10° ADT* +45° and -45° 88.7 inches 81

790–960 MHz 20.4 dBi 800 10456 0° +45° and -45° 88.7 inches 83

65° 806–960 MHz 9 dBi 739 619 0° +45° and -45° 10.1 inches 97

806–960 MHz 12.5 dBi 739 620 0° +45° and -45° 25.8 inches 98


790–960 MHz 14.7 dBi 800 10207V01 6° +45° and -45° 50.9 inches 99

790–960 MHz 14.7 dBi 800 10303V02 0°– 14° ADT* +45° and -45° 50.9 inches 84



824–960 MHz 15.5 dBi 800 10516V01 0°– 10° ADT* 2 x +45° and -45° 79.7 inches 85



698–894 MHz 16.4 dBi 800 10736 0°– 10° ADT* +45° and -45° 96 inches 73




790–960 MHz 17.1 dBi 800 10306V02 0.5°– 9.5° ADT* +45° and -45° 101.3 inches 89

790–960 MHz 17 dBi 800 10647V01 0°– 8° ADT* 2 x +45° and -45° 88.7 inches 90

790–960 MHz 17.5 dBi 800 10307V01 0.5°– 9.5° ADT* +45° and -45° 101.3 inches 91





85° 790–960 MHz 13.3 dBi 800 10308V01 0°–14° ADT* +45° and -45° 50.9 inches 92

698–894 MHz 13.5 dBi 800 10701 0°–16° ADT* +45° and -45° 53.3 inches 75


698–894 MHz 15.7 dBi 800 10703 0°–10° ADT* +45° and -45° 96 inches 79

790–960 MHz 14.9 dBi 800 10309V01 0°–10° ADT* +45° and -45° 76.1 inches 93

790–960 MHz 16 dBi 800 10310V01 0.5°–9.5° ADT* +45° and -45° 101.3 inches 94



88° 824–960 MHz 16.5 dBi 800 10518V01 0°– 8° ADT* 2 x +45° and -45° 103.4 inches 96

698-960 MHz • X Polarization

*ADT - Adjustable Electrical Downtilt

700 and 800 MHz X-POL Panel Antennas

67



A N T E N N A S

Kathrein’s advanced antennas for 698-960 MHz feature

cross-polarized (X-Pol) radiation systems, offering the benefits of

diversity operation but without the physical requirements of a space

diversity implementation.

Many include fully adjustable down-tilt (ADT), allowing site

optimization without replacing antennas, and may be equipped for

optional remote downtilt control.

Kathrein’s advanced antennas for 706-960 MHz have beamwidths

from 30° to 90°, and gain specifications from 9 dBi to 19 dBi.

698–960 MHz X-POL

698–960 MHz X-Polarization Panel Antennas

68



698–894 MHz Panel AntennaX- polarization 800 10734

11219-A936.4130

65°

698–894 MHz

X - POL

Adjustable Electrical D0°–16°

Internal Remote Co





Frequency range 698–894 MHz

VSWR <1.5:1

Impedance 50 ohms



Maximum input power 500 watts per input (at 50°C)

Connector 2 x 7-16 DIN female (long neck)(bottom mounted)

Isolation >30 dB

Electrical downtilt 0–16 degrees (continuously adjustable)

Specifications: 698–806 MHz 824–894 MHz

Gain 14.2 dBi 14.8 dBi

Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar)32 dB (average) 33 dB (average)

+45° and -45° polarization 68° (half-power) 65° (half-power)horizontal beamwidth

+45° and -45° polarization 16° (half-power) 14.8° (half-power)vertical beamwidth

Min. sidelobe suppression for 0° 8° 16° T 0° 8° 16° Tfirst sidelobe above main beam 16 17 17 dB 18 17 16 dBaverage 19 20 20 dB 25 23 23 dB

Cross polar ratioMain direction 0° 24 dB (typical) 23 dB (typical)

Sector ±60° >10 dB, Average: 15 dB >10 dB, Average: 16 dB

IRT specifications:

Logical interface ex factory1 AISG 1.1


Hardware interface2 2 x 8 pin connector acc. IEC 60130-9;according to AISG:– IRT in (male): Control / Daisy chain in– IRT in (female): Daisy chain out


Power consumption <1 watt (standby)<8.5 watts (motor activated)

Adjustment time (full range) 40 sec.





Dimensions H x W x D 53.3 x 11.9 x 3.9 inches (1355 x 303 x 99 mm)






Mounting bracket 2-point hot-dip galvanized with(included) stainless steel hardware for 2 to 4.5 inch

(50 to 115 mm) OD masts.

698–894 MHz

0

3 0

6 0

90

1 2 0

1 5 0

180 2

1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1) The protocol of the logical interface can beswitched from AISG 1.1 to 3GPP/AISG 2.0 andvice versa with a vendor specific command. Start-up operation of the RCU 86010149 is possible inan RET system supporting AISG 1.1 or supporting3GPP/AISG 2.0 after performing a layer 2 resetbefore address assignment. The protocol can alsobe changed as follows: AISG 1.1 to 3GPP: Enter"3GPP" into the additional data filed "Installer’sID" and perform a layer 7 reset or a power reset.3GPP to AISG 1.1: Enter "AISG 1" into theadditional datafield "Installer’s ID" and perform alayer 2 reset or a power reset. After switching theprotocol any other information can be entered intothe "Installer’s ID" field.

2) The tightning torque for fixing the connector mustbe 0.5 – 1.0 Nm (‘hand-tightened’). The connectorshould be tightened by hand only!

Profile PC3


Order Information:

Model Description

800 10734 Antenna with 738 546 mounting brackets0°–16° electrical downtilt

800 10734 K Antenna with 738 546 mounting bracketsand 850 10013 mechanical tilt bracket0°–16° electrical downtilt




698–894–45

7-16

698–894+45

7-16

IRTin out

8pinmale

8pinfemale

11.9 inches(303 mm)


2.625 inches ± 0.125(68 mm ± 4)

3.9 inches(99 mm)


860 10149 for the


55.4 inches

(1406 mm)

56.9 inches

(1446 mm)

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:(1) This device may not cause harmful interference,

and (2) this device must accept any interferencereceived, including interference that may cause


KATHREIN 860 10149

Tested To Comply

With FCC Standards

698–894 MHz Panel AntennaX- polarization

800 10734




11220-B936.4131

65°

698–894 MHz

X - POL


Internal Remote Co



VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dB



Gain 15.5 dBi 16 dBi



+45° and -45° polarization 11.3° (half-power) 10° (half-power)vertical beamwidth




IRT specifications:

















Mounting bracket 2-point hot-dip galvanized with(included) stainless steel hardware for 2 to 4.5 inch

(50 to 115 mm) OD masts.

Order Information:

Model Description


800 10735 K Antenna with 738 546 mounting bracket and850 10007 mechanical tilt bracket0°–10° electrical downtilt


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30




698–894 MHz



Profile PC3





800 10735

698–894–45

7-16

698– 894+45

7-16

IRTin out

8pinmale

8pinfemale

11.9 inches(303 mm)

2.625 inches ± 0.125(68 mm ± 4)

3.9 inches(99 mm)


860 10149 for the



Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may cause


KATHREIN 860 10149

Tested To Comply

With FCC Standards

76.1 inches

(1934 mm)

78.1 inches

(1984 mm)

79.7 inches

(2024 mm)



0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

11097-C936.4132/a


800 10736

65°

698–894 MHz

X - POL


Internal Remote Co




Order Information:

Model Description






VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dB

Electrical downtilt 0.5–9.5 degrees (continuously adjustable)


Gain 16.4 dBi 17 dBi



+45° and -45° polarization 9.5° (half-power) 8.6° (half-power)vertical beamwidth

Min. sidelobe suppression for 0.5° 5° 9.5° T 0.5° 5° 9.5° Tfirst sidelobe above main beam 16 16 16 dB 18 18 17 dBaverage 19 18 17 dB 20 20 20 dB



IRT specifications:











Dimensions H x W x D 96 x 11.9 x 3.9 inches (2438 x 303 x 99 mm)






Mounting bracket 2-point hot-dip galvanized with stainless steelhardware for 2 to 4.5 inch (50 to 115 mm) OD masts.



Profile PC3





800 10736

11.9 inches(303 mm)

96 inches(2438 mm)

2.625 inches ± 0.125

(68 mm ± 4)

3.9 inches

(99 mm)



98 inches

(2489 mm)




KATHREIN 860 10149

Tested To Comply

With FCC Standards

698–894–45

7-16

698–894+45

7-16

IRTin out

8pinmale

8pinfemale




11221-FRO/e936.A2692/e

85°

698–894 MHz

X - POL


Internal Remote Co



VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dBElectrical downtilt 0–16 degrees (continuously adjustable)





+45° and -45° polarization 16.5° (half-power) 15° (half-power)vertical beamwidth


Cross polar ratioMain direction 0° 24 dB (typical) 26 dB (typical)Sector ±60° >8 dB, Average: 14 dB >8 dB, Average: 14 dB

IRT specifications:









1 The protocol of the logical interface canbe switched from AISG 1.1 to 3GPP/AISG2.0 and vice versa with a vendor specificcommand.

Please note: If the Primary of theRETsystem doesn’t support the standardof the ‘logical interface ex factory’, theRCU must be switched to the appropriatestandard of the Primary before installation.Please contact Kathrein for furtherinformation.

2 The tightning torque for fixing the connectormust be 0.5 – 1.0 Nm (‘hand-tightened’).The connector should be tightened byhand only!

Order Information:

Model Description







0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

698–894 MHz


Weight 22 lb (10 kg)26.5 lb (12 kg) clamps included34.6 lb (15.7 kg) clamps and tilt kit included



(570 N / 125 N / 680 N)


Shipping dimensions 59.1 x 12.4 x 5 inches (1502 x 315 x 127 mm)


Mounting bracket 2-point hot-dip galvanized with stainless steelhardware for 2 to 4.5 inch (50 to 115 mm) OD masts.

Profile PC3





800 10701

698–894–45

7-16

698– 894+45

7-16

IRTin out

8pinmale

8pinfemale

11.9 inches

(303 mm)

53.3 inches

(1355 mm)

2.625 inches ± 0.125

(68 mm ± 4)

3.9 inches

(99 mm)




55.4 inches

(1406 mm)

56.9 inches

(1446 mm)



KATHREIN 860 10149

Tested To Comply

With FCC Standards



800 10702698–894 MHz Panel AntennaX- polarization

11222-FRO/d936.A2691/e

85°

698–894 MHz

X - POL


Internal Remote Co



VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dBElectrical downtilt 0–10 degrees (continuously adjustable)







Cross polar ratioMain direction 0° 22 dB (typical) 22 dB (typical)Sector ±60° >10 dB, Average: 16 dB >10 dB, Average: 15 dB

IRT specifications:











Dimensions H x W x D 76.1 x 10 x 3.9 inches (1934 x 255 x 99 mm)


(660 N / 280 N / 940 N)


Shipping dimensions 81.1 x 10.7 x 5 inches (2060 x 272 x 127 mm)


Mounting bracket 2-point hot-dip galvanized with stainless steelhardware for 2 to 4.5 inch (50 to 115 mm) ODmasts.

1 The protocol of the logical interface canbe switched from AISG 1.1 to 3GPP/AISG2.0 and vice versa with a vendor specificcommand.

Please note: If the Primary of theRETsystem doesn’t support the standardof the ‘logical interface ex factory’, theRCU must be switched to the appropriatestandard of the Primary before installation.Please contact Kathrein for furtherinformation.

2 The tightning torque for fixing the connectormust be 0.5 – 1.0 Nm (‘hand-tightened’).The connector should be tightened byhand only!

Order Information:

Model Description







698–894 MHz0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PC4





800 10702

69

8–89

4–45

7-16

69

8–89

4+45

7-16

IRTin out

8pinmale

8pinfemale

10 inches(255 mm)


2.625 inches ± 0.125(68 mm ± 4)

3.9 inches

(99 mm)


860 10149 for the


78.1 inches

(1984 mm)

79.7 inches

(2024 mm)


Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interference


KATHREIN 860 10149

Tested To Comply

With FCC Standards




800 10703

698–894–45

7-16

698–894+45

7-16

IRTin out

8pinmale

8pinfemale

10 inches(255 mm)

96 inches(2438 mm)

2.625 inches ± 0.125(68 mm ± 4)

3.9 inches(99 mm)





98.7 inches

(2508 mm)



KATHREIN 860 10149

Tested To Comply

With FCC Standards




800 10456V0



VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dBTracking, average 2.5 dB

Squint ±2.0°




(1760 N) / (330 N) / (2040 N)(290 N) / (80 N) / (300 N)

Mounting category H (Heavy)




11352-B936.3907/b

Horizontal pattern±45° - polarization




Average gain 20 dbi 20.2 dbi 20.5 dbi


Horizontal beamwidth 33° (half-power) 32° (half-power) 30° (half-power)

Vertical beamwidth 9.1° (half-power) 8.8° (half-power) 8.5° (half-power)

Electrical downtilt 0.5°–10° 0.5°–10° 0.5°–10°continuously adjustable (manual or optional remote control)

Sidelobe suppression for: 0° 5° 10° T 0° 5° 10° T 0° 5° 10° TFirst sidelobe above main beam >16 >13 >13 dB >18 >18 >17 dB >18 >16 >15 dB

Cross polar ratioMain direction 0° 25 dB (typical) 23 dB (typical) 20 dB (typical)

Mounting Equipment:

Model Description




30°

790–960 MHz

X - POL


90 inches

(2286 mm)88.7 inches

(2254 mm)

3.9 inches

(99 mm)

22.7 inches

(576 mm)

91.6 inches

(2326 mm)

2.625 inches ± 0.125(68 mm ± 4)

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30


790– 960–45

790–960+45

7-16 7-16



806–960 MHz Panel AntennaX- polarization800 10141


Frequency range 806-960 MHz

VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dBWeight 48.5 lb (22 kg)

Dimensions 51 x 22 x 4.6 inches(1296 x 560 x 116 mm)





10778-E936.4119


Vertical pattern±45° - polarization Specifications: 806–894 MHz 880–960 MHz

Gain 18 dBi 18.5 dBi

Horizontal beamwidth 31° (half-power) 29° (half-power)

Vertical beamwidth 15° (half-power) 14° (half-power)

Front-to-back ratio, copolar >25 dB >29 dB

806-960-45° 806-960+45°

7-16 7-16

30°

806–960 MHz

X - POL


6.3 inches

(160 mm)

22 inches(560 mm)

55 inches(1396 mm)

51 inches

(1296 mm)

53.5 inches

(1358 mm)

2.625 inches ± 0.125

(68 mm ± 4)

Mounting Equipment:

Model Description


850 10013 Tilt Mount Kit(optional) 0–16 Degrees downtilt angle.







VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dB

Tracking 2 dB

Squint ±2°








Mounting Equipment:

Model Description





Average gain 20.2 dbi 20.4 dbi 20.8 dbi




Sidelobe suppression for:First sidelobe above main beam >15 dB 15 dB >15 dB


11310-A936.4149

790–960–45

790–960+45

7-16 7-16

NE W

30°

790–960 MHz

X-POL

0° Electrical Down

800 10643

90 inches(2286 mm)


3.9 inches(99 mm)

22.7 inches(576 mm)


2.625 inches ± 0.125(68 mm ± 4)


Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30



http://slidepdf.com/reader/full/kahrein-katalogas 100/3654 11368-A936.3885/a



VSWR <1.5:1

Front-to-back ratio >25 dB (co-polar)

Impedance 50 ohms




Connector 2 x 7-16 DIN femaleIsolation >30 dB








Average gain tilt 0° 7° 14° 0° 7° 14° 0° 7° 14°dBi 14.5 14.4 14.3 14.7 14.5 14.4 15 14.8 14.7



Vertical beamwidth 15.7° (half-power) 15.5° (half-power) 15° (half-power)

Electrical downtilt 0°–14° 0°–14° 0°–14°continuously adjustable (manual or optional remote control)

Sidelobe suppression for: 0° 7° 14° T 0° 7° 14° T 0° 7° 14° TFirst sidelobe above horizon 15 14 15 dB 18 15 15 dB 18 15 15 dB

Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB

790–960 MHz Panel AntennaX Polarization

Mounting Equipment:

Model Description






3.9 inches(99 mm)

10.2 inches(259 mm)


2.625 inches ± 0.125(68 mm ± 4)

800 10303V02

65°

790–960 MHz

X - POL

justable Electrical Downtilt

0°–14°

Remote Control Option

Profile PC2




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960–45

790–960+45

7-16 7-16




824–960 MHz Panel AntennaXX- polarization



VSWR <1.5:1

Front-to-back ratio >25 dB

Impedance 50 ohms




Connector 4 x 7-16 DIN femaleElectrical downtilt 0–10 degrees (continuously adjustable)

Weight 50.7 lbs (23 kg)55.1 lb (25.kg) clamps included






11338-A936.4175


Gain at 0° tilt 15.5 dBi 15.7 dBi



Sidelobe suppression for 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam >14 15 15 dB >14 15 15 dB

Cross polar ratioMain direction 0° 15 dB (typical) 16 dB (typical)Sector ±60° >10 dB >10 dB

Isolation >25 dB (typical) >28 dB (typical)

50.4 inches

(1280 mm)

29.1 inches(738 mm)


2.625 inches ± 0.125(68 mm ± 4)

14.5 inches

(368 mm)

24.3 inches

(618 mm)

6.7 inches

(169 mm)

14.7 inches

(374 mm)

Mounting Equipment:

Model Description



65°

824–960 MHz824–960 MHz

XX - POL


Remote Control Op

800 10516V0




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30


824–960–45°

7-16

824–960–45°

7-16

824–960+45°

7-16

824–960+45°

7-16


http://slidepdf.com/reader/full/kahrein-katalogas 102/3656 11341-A936.3816/c



VSWR <1.5:1

Impedance 50 ohms






Squint ±1.5°








Mounting Equipment:

Model Description






3.9 inches(99 mm)

10.2 inches(259 mm)


2.625 inches ± 0.125

(68 mm ± 4)

Specifications: 790–862 MHz 824–894 MHz 880–960 MHzAverage gain tilt 0° 5° 10° 0° 5° 10° 0° 5° 10°

dBi 16.2 16.4 16.2 16.3 16.6 16.3 16.6 16.8 16.6



Vertical beamwidth 10° (half-power) 9.9° (half-power) 9.7° (half-power)


Sidelobe suppression for: 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam 18 18 18 dB 18 18 18 dB 18 18 18 dB


65°

790–960 MHz

X - POL

justable Electrical Downtilt0°–10°


800 10634V01

Profile PC2




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960–45

790– 960+45

7-16 7-16




11339-A936.4176


Frequency range 2 x 824–960 MHz

VSWR <1.5:1


Impedance 50 ohms

Intermodulation (2x20w) IM3: -150 dBc

Polarization 2 x +45° and -45°




Weight 61.7 lbs (28 kg)66.1 lb (30 kg) clamps included






824–960 MHz Panel AntennaXX Polarization


Gain 16.5 dBi 16.7 dBi+45° and -45° polarization 66° (half-power) 61° (half-power)horizontal beamwidth




Isolation, between ports >25 dB >28 dB

824–960+45

7-16

824–960–45

7-16

824–960+45

7-16

824–960–45

7-16


29.1 inches(738 mm)

103.6 inches(2631 mm)

2.625 inches ± 0.125

(68 mm ± 4)

36.3 inches(921 mm)14.5 inches

(368 mm)

Layout of interface

824–960

824–960

+45°–45°

RCU RCU

°54+°54–

Mounting Equipment:

Model Description



65°

824–960 MHz824–960 MHz

XX - POL


Remote Control Op

800 10517V0

Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

6.7 inches

(169 mm)

14.7 inches

(374 mm)



http://slidepdf.com/reader/full/kahrein-katalogas 104/3658 11369-A936.3814/b



VSWR <1.5:1


Impedance 50 ohms





Tracking, average 0.5 dB

Squint ±2.5°








Mounting Equipment:

Model Description






3.9 inches(99 mm)

10.2 inches

(259 mm)

91.5 inches

(2324 mm)

2.625 inches ± 0.125(68 mm ± 4)

65°

790–960 MHz

X - POL



800 10305V02

Profile PC2


Average gain tilt 0° 4° 8° 0° 4° 8° 0° 4° 8°dBi 16.8 17 16.7 16.9 17.1 16.9 17.2 17.4 17




Sidelobe suppression for: 0° 2° 4° 8° T 0° 2° 4° 8° T 0° 2° 4° 8° TFirst sidelobe above main beam 18 18 18 16 dB 18 18 18 16 dB 20 18 17 15 dB


790–960

–45

790–960

+45

7-16 7-16

Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30






Impedance 50 ohms

VSWR <1.5:1





Isolation >30 dBTracking 1 dB

Squint ±2°

Null-fill at 0° tilt -25 dB (typical)






Shipping dimensions 113.2 x 10.7 x 5 inches(2876 x 272 x 127 mm)


Gain 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T(average) 17 17.1 17 dBi 17.1 17.2 17.1 dBi 17.3 17.4 17.3 dBi




Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°continuously adjustable

Sidelobe suppression for 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° Tfirst sidelobe above main beam >17 14 14 dB >18 15 15 dB >20 18 18 dB

Cross polar ratio (typical)Main direction 0° 23 dB 23 dB 25 dB

Sector ±60° >10 dB >10 dB >10 dB

11301-B936.3794/a


Mounting Equipment:

Model Description




800 10306V02

65°

790–960 MHz

X - POL


0.5°–9.5°

Remote Control Op

Profile PC2

102.5 inches(2604 mm)

101.3 inches(2574 mm)

3.9 inches(99 mm)

104.1 inches(2644 mm)

2.625 inches ± 0.125(68 mm ± 4)

10.2 inches(259 mm)




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960–45

790–960+45

7-16 7-16






VSWR <1.5:1


Impedance 50 ohms





Tracking, avg. 1 dB

Squint ±2.5°








Mounting Equipment:

Model Description




90 inches(2286 mm)


3.9 inches(99 mm)

22.7 inches

(576 mm)


2.625 inches ± 0.125(68 mm ± 4)


Average gain tilt 0° 4° 8° 0° 4° 8° 0° 4° 8°dBi 16.9 17.1 17 17 17.2 17.1 17.3 17.4 17.1


Vertical beamwidth 9.1° (half-power) 9° (half-power) 8.5° (half-power)


Sidelobe suppression for first 0° 3° 6° 8° T 0° 3° 6° 8° T 0° 3° 6° 8° Tsidelobe above main beam, avg. 18 18 16 15 dB 18 18 16 15 dB 18 18 16 15 dB


65°

790–960 MHz790–960 MHz

XX - POL



800 10647V01

790–960

–45

7-16

790– 960

+45

7-16

790–960

–45

7-16

790–960

+45

7-16

Layout of interface

RCU790–960

RCU790–960

–45° +45° –45° +45°

Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30






Impedance 50 ohms

VSWR <1.5:1





Isolation >30 dBTracking, average 1 dB

Squint ±2°








Gain 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° T(average) 17.4 17.5 17.4 dBi 17.5 17.6 17.5 dBi 17.7 17.9 17.7 dBi

Front-to-back ratio >24 dB >25 dB >25 dB(180°±30°)



Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°continuously adjustable



11302-B936.3981/a


Mounting Equipment:

Model Description




800 10307V

65°

790–960 MHz

X - POL


0.5°–9.5°

Remote Control Op

Profile PC2

102.5 inches(2604 mm)

101.3 inches(2574 mm)

3.9 inches(99 mm)

104.1 inches(2644 mm)

2.625 inches ± 0.125(68 mm ± 4)

10.2 inches(259 mm)



0.5–9.5° electrical downtilt

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960–45

790–960+45

7-16 7-16





11330-B936.3998/a



VSWR <1.5:1

Impedance 50 ohms






Squint ±1.5°







Specifications: 790–862 MHz 824–894 MHz 880–960 MHzAverage gain tilt 0° 7° 14° 0° 7° 14° 0° 7° 14°

dBi 13.2 13.3 13.2 13.3 13.4 13.3 13.4 13.5 13.4

Front-to-back ratio (180°±0°) >24 dB >24 dB >26 dB(180°±30°) >20 dB >22 dB >24 dB


Vertical beamwidth 16° (half-power) 15.5° (half-power) 15° (half-power)


Sidelobe suppression for: 0° 7° 14° T 0° 7° 14° T 0° 7° 14° TFirst sidelobe above main beam >17 16 15 dB >17 17 16 dB >17 16 16 dB


10.2 inches

(259 mm)



52.1 inches

(1324 mm)

3.9 inches

(99 mm)

2.625 inches ± 0.125(68 mm ± 4)

85°

790–960 MHz

X - POL

justable Electrical Downtilt0°–14 °


800 10308V01

Profile PC2

Mounting Equipment:

Model Description




790–960–45

790–960+45

7-16 7-16




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30





11260-A936.3918/b



VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dBTracking 0.5 dB

Squint ±3.0°








Average gain tilt 0° 5° 10° 0° 5° 10° 0° 5° 10°dBi 14.8 15 14.6 14.9 15.1 14.7 14.8 15.2 15





Sidelobe suppression for: 0° 5° 10° T 0° 5° 10° T 0° 5° 10° TFirst sidelobe above main beam >15 15 14 dB >15 15 15 dB >18 18 18 dBAverage >19 19 19 dB >20 20 20 dB >22 22 22 dB

Cross polar ratioMain direction 0° 23 dB (typical) 22 dB (typical) 22 dB (typical)Sector ±60° >10 dB>10 dB >10 dB

10.2 inches(259 mm)




3.9 inches(99 mm)

2.625 inches ± 0.125(68 mm ± 4)

Mounting Equipment:

Model Description




790–960–45

790–960+45

7-16 7-16

85°

790–960 MHz

X - POL

Adjustable Electrical D0°–10 °

Remote Control Op

800 10309V0

Profile PC2




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30







VSWR <1.5:1

Impedance 50 ohms






Squint ±3.5°








Average gain tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°dBi 15.8 15.6 15.4 16 15.9 15.8 16.2 16.2 16.2




Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°continuously adjustable (manual or optional remote control)

Sidelobe suppression for: 0.5° 5° 9.5° T 0.5° 5° 9.5° T 0.5° 5° 9.5° TFirst sidelobe above main beam >18 14 14 dB >18 17 16 dB >17 16 15 dB


10.2 inches(259 mm)

105.3 inches

(2674 mm)

101.3 inches(2574 mm)

102.5 inches(2604 mm)

3.9 inches(99 mm)

2.625 inches ± 0.125(68 mm ± 4)

Mounting Equipment:

Model Description




85°

790–960 MHz

X - POL

justable Electrical Downtilt0.5°–9.5°


800 10310V01

Profile PC2

790–960–45

790–960+45

7-16 7-16




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

11311-A936.3996/a





11329-A936.3995/a



VSWR <1.5:1

Impedance 50 ohms






Squint ±3.5°








Average gain tilt 0.5° 5° 9.5° 0.5° 5° 9.5° 0.5° 5° 9.5°dBi 16.2 16.2 15.8 16.3 16.3 16.1 16.5 16.6 16.5



Vertical beamwidth 8° (half-power) 7.8° (half-power) 7.6° (half-power)

Electrical downtilt 0.5°–9.5° 0.5°–9.5° 0.5°–9.5°continuously adjustable (manual or optional remote control)



Mounting Equipment:

Model Description




790–960–45

790– 960+45

7-16 7-16

85°

790–960 MHz

X - POL

Adjustable Electrical D0.5°–9.5°

Remote Control Op

800 10300V0

Profile PC2

10.2 inches

(259 mm)

105.3 inches(2674 mm)

101.3 inches(2574 mm)

102.5 inches(2604 mm)

3.9 inches

(99 mm)

2.625 inches ± 0.125(68 mm ± 4)

Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30





Frequency range 2 x 824–960 MHz

VSWR <1.5:1


Impedance 50 ohms


Polarization 2 x +45° and 2 x -45°





Squint ±4.5°

Weight 61.7 lbs (28 kg)66.1 lbs (30 kg) clamps included








Gain at 0° tilt 4 x 16.5 dBi 4 x 17 dBi





Isolation >25 dB (typical) >28 dB (typical)

824–960+45

7-16

824–960–45

7-16

824–960+45

7-16

824–960–45

7-16

Mounting Equipment:

Model Description




Layout of interface

824–960

824–960

+45°–45°

RCU RCU

°54+°54–

11340-A936.4177

74.3 inches

(1887 mm)

29.1 inches

(738 mm)

103.6 inches(2631 mm)

2.625 inches ± 0.125

(68 mm ± 4)

36.3 inches

(921 mm)14.5 inches(368 mm)

88°

824–960 MHz824–960 MHz

XX - POL



800 10518V01

Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

6.7 inches(169 mm)

14.7 inches(374 mm)





Specifications:


Gain 2 x 8.5 dBi (806–880 MHz)2 x 9 dBi (880–960 MHz)

Impedance 50 ohms

VSWR < 1.5:1

Intermodulation (2x20w) IM3: <-150dBc



Maximum input power 350 watts (at 50°C) per input

±45° polarization 70 degrees (half-power) (806–880 MHz)horizontal beamwidth 65 degrees (half-power) (880–960 MHz)

±45° polarization 70 degrees (half-power) (806–880 MHz)vertical beamwidth 68 degrees (half-power) (880–960 MHz)


Isolation >30 dB

Cross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB

Weight 6.6 lb (3 kg)



(40 N) / (25 N) / (90 N)




Horizontal pattern



10534-E936.1408/g

65°

806–960 MHz

X - POL

0° Electrical Down

739 619

Profile PA1

10.1 inches(256 mm)

13.8 inches(350 mm)

10.3 inches(262 mm)

2.625 inches ± 0.125(68 mm ± 4)

4.6 inches(116 mm)

Mounting Equipment:

Model Description






Specifications:


Gain 2 x 12 dBi (806–880 MHz)2 x 12.5 dBi (880–960 MHz)

Impedance 50 ohms

VSWR < 1.5:1

Intermodulation (2x20w) IM3:< -150dBc




±45° polarization 68 degrees (half-power) (806–880 MHz)horizontal beamwidth 65 degrees (half-power) (880–960 MHz)

±45° polarization 29 degrees (half-power) (806–880 MHz)vertical beamwidth 27 degrees (half-power) (880–960 MHz)


Isolation >30 dB




(110 N) / (60 N) / (240 N)




Horizontal pattern



Mounting Equipment:

Model Description




65°

806–960 MHz

X - POL


739 620

Profile PA1

29.5 inches

(750 mm)

25.8 inches(656 mm)

10.3 inches(262 mm)

2.625 inches ± 0.125(68 mm ± 4)

28 inches(710 mm)

4.6 inches(116 mm)

10532-E936.1557/d



Specifications: 790–862 MHz 824–894 MHz 880–960 MHzGain 14.5 dBi 14.7 dBi 15 dBi

VSWR 1.4:1 1.3:1 1.3:1


+45° and -45° polarization 16° (half-power) 15.7° (half-power) 14.6° (half-power)vertical beamwidth

Sidelobe suppression forfirst sidelobe above horizon >13 dB >14 dB >16 dBsector 0°–30° above horizon >13 dB >14 dB >14 dB



65°

790–960 MHz

X - POL

6° Electrical Down

800 10207V0

Profile PC2




Impedance 50 ohms





Electrical downtilt 6 degreesIsolation >30 dB








11294-B936.3779/a



3.9 inches(99 mm)

10.2 inches(259 mm)

2.625 inches ± 0.125

(68 mm ± 4)



6° electrical downtilt

Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960–45

790–960+45

7-16 7-16


Mounting Equipment:

Model Description







11364-A936.3908/a


Gain 14.5 dBi 14.7 dBi 15 dBi

Front-to-back ratio (180°±30°) >23 dB >24 dB >25 dB



Sidelobe suppression forfirst sidelobe above horizon >14 dB >15 dB >14 dB

Cross polar ratioMain direction 0° >20 dB >20 dB >20 dBSector ±60° >11 dB >11 dB >11 dB

Mounting Equipment:

Model Description




65°

790–960 MHz

X - POL


800 10202V02

Profile PC2



Impedance 50 ohms

VSWR <1.5:1






Squint ±2°










3.9 inches(99 mm)

10.2 inches

(259 mm)

2.625 inches ± 0.125

(68 mm ± 4)




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960–45

790–960+45

7-16 7-16







Front-to-back ratio >25 dB (180°±30°)

Impedance 50 ohms





Isolation >30 dBTracking, average 1 dB

Squint ±1.5°







Specifications: 790–862 MHz 824–894 MHz 880–960 MHzGain 16.2 dBi 16.5 dBi 16.9 dBi

VSWR <1.5:1 <1.4:1 <1.3:1



Electrical downtilt 6° 6° 6°



11367-A936.3909/a

Mounting Equipment:

Model Description




65°

790–960 MHz

X - POL

6° Electrical Down

800 10294V0

Profile PC2



3.9 inches(99 mm)


2.625 inches ± 0.125

(68 mm ± 4)

10.2 inches(259 mm)




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960–45

790–960+45

7-16 7-16






3.9 inches(100 mm)


2.625 inches ± 0.125

(68 mm ± 4)

10.2 inches(259 mm)





Impedance 50 ohms






Squint ±2°








Mounting Equipment:

Model Description





Gain 16.4 dBi 16.6 dBi 16.9 dBi

VSWR <1.5:1 <1.5:1 <1.4:1




Cross polar ratioMain direction 0° >22 dB >22 dB >22 dBSector ±30° >18 dB >18 dB >18 dBSector ±60° >14 dB >14 dB >14 dB

11365-A936.3804/c

65°

790–960 MHz

X - POL


800 10203V02

Profile PC2



0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790–960–45

790–960+45

7-16 7-16





Mounting Equipment:

Model Description







Impedance 50 ohms






Squint ±2°


Tracking 0.5 dB

Squint ±2°





Shipping dimensions 93.9 x 10.7 x 5.8 inches

(2386 x 272 x 147 mm)



VSWR <1.5:1 <1.4:1 <1.4:1





65°

790–960 MHz

X - POL

0° Electrical Down

800 10204V0

Profile PC2

11366-A936.3812/b



3.9 inches(99 mm)

10.2 inches(259 mm)

91.5 inches

(2324 mm)

2.625 inches ± 0.125(68 mm ± 4)



0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

790– 960–45

790–960+45

7-16 7-16





11297-A936.3980/a



VSWR <1.5:1

Front-to-back ratio >25 dB (180° ±30°)

Impedance 50 ohms





Null fill -25 dB typical


Squint ±2°







(2706 x 272 x 147 mm)





Sidelobe suppression forfirst sidelobe above main beam >14 dB >15 dB >15 dB


Mounting Equipment:

Model Description




2.625 inches ± 0.125(68 mm ± 4)

10.2 inches(259 mm)

105.3 inches(2674 mm)

101.3 inches(2574 mm)

102.5 inches(2604 mm)

3.9 inches(99 mm)

65°

790–960 MHz

X - POL


800 10215V01

Profile PC2


Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30


790–960–45

790–960+45

7-16 7-16






VSWR <1.4:1

Front-to-back ratio >25 dB(180°±30)

Impedance 50 ohms





Electrical downtilt 6 degrees

Null fill -25 dB (typical)

Tracking 0.5 dB

Squint ±2.5°







Mounting Equipment:

Model Description










11295-A936.3978/a

102.5 inches(2604 mm)

101.3 inches(2574 mm)

3.9 inches(99 mm)

104.1 inches

(2644 mm)

2.625 inches ± 0.125(68 mm ± 4)

10.2 inches

(259 mm)

65°

790–960 MHz

X-POL

6° Electrical Down

800 10208V0

Profile PC2

790–960–45

790–960+45

7-16 7-16



Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30







Impedance 50 ohms

VSWR <1.4:1






Null-fill -25 dB (typical)

Tracking, average 1 dB

Squint ±2.5°







(2705 x 272 x 147 mm)

Mounting Equipment:

Model Description






Front-to-back ratio >25 dB >25 dB >25 dB(180°±30°)



Sidelobe suppression for >13 dB >15 dB >16 dBfirst sidelobe above main beam


11296-A936.3979/a

102.5 inches(2604 mm)

101.3 inches(2574 mm)

3.9 inches(99 mm)

104.1 inches

(2644 mm)

2.625 inches ± 0.125(68 mm ± 4)

10.2 inches(259 mm)

65°

790–960 MHz

X-POL


800 10214V01

Profile PC2

790–960–45

790–960+45

7-16 7-16




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30







VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dB


Squint ±4.5°







Mounting Equipment:

Model Description








Front-to-back ratio (180° ±0°) >25 dB >25 dB >25 dB(180° ±30°) >23 dB >24 dB >24 dB

Sidelobe suppression forfirst sidelobe above main beam 16 dB 17 dB 16 dB


11322-A936.3999/a

102.5 inches(2604 mm)

101.3 inches(2574 mm)

3.9 inches(99 mm)

104.1 inches

(2644 mm)

2.625 inches ± 0.125(68 mm ± 4)

10.2 inches

(259 mm)

790–960–45

790–960+45

7-16 7-16

85°

790–960 MHz

X-POL

0° Electrical Down

800 10217V0

Profile PC2


Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

NE W







VSWR <1.4:1

Impedance 50 ohms





Isolation >30 dBElectrical downtilt 6 degrees


Squint ±2.5°







Mounting Equipment:

Model Description








Front-to-back ratio (180° ±0°) >24 dB >25 dB >27 dB(180° ±30°) >22 dB >23 dB >25 dB

Sidelobe suppression forfirst sidelobe above main beam 17 dB 16 dB 16 dB


11323-A936.4000/a

102.5 inches(2604 mm)

101.3 inches(2574 mm)

3.9 inches(99 mm)

104.1 inches

(2644 mm)

2.625 inches ± 0.125(68 mm ± 4)

10.2 inches(259 mm)

790–960–45

790–960+45

7-16 7-16

85°

790–960 MHz

X-POL


800 10218V01

Profile PC2




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

NE W





35° 1710–2170 MHz 19.5 dBi 800 10251V01 0°– 12° ADT* +45° and -45° 40.6 inches 111


45° 1710–2170 MHz 19.5 dBi 742 218V01 0°– 8° ADT* +45° and -45° 51.4 inches 113

1710–2180 MHz 21 dBi 742 219V01 0°– 6° ADT* +45° and -45° 76.6 inches 114

62° 1710–2200 MHz 18.7 dBi 800 10636 0°– 8° ADT* +45° and -45° 55.4 inches 117

65° 1710–2170 MHz 12 dBi 739 489V01 2° +45° and -45° 13.5 inches 146


1710–2170 MHz 15.6 dBi 742 196V01 0° +45° and -45° 28.9 inches 147 1710–2200 MHz 17.6 dBi 800 10504V01 0°– 15° ADT* +45° and -45° 54.6 inches 130


1710–2170 MHz 17.7 dBi 742 214V01 0°– 8° ADT* +45° and -45° 45 inches 126









1710–2170 MHz 20.2 dBi 742 186V01 0° +45° and -45° 85 inches 151



68° 1710–2170 MHz 8.6 dBi 742 210V01 0° +45° and -45° 6.1 inches 145

88° 1710–2170 MHz 11.5 dBi 741 984V01 0° +45° and -45° 13.5 inches 153




1710 – 2200 MHz • XX Polarization • Adjustable Electrical Downtilt





1710–2170 MHz 17.7 dBi 742 237 0°– 8° ADT* 2 x +45° and -45° 45.2 inches 141



1710–2170 MHz 19.2 dBi 742 235V01 0°–6° ADT* 2 x +45° and -45° 77.1 inches 143

88° 1710–2180 MHz 16.2 dBi 742 352V01 0°–10° ADT* 2 x +45° and -45° 51.9 inches 144


1710 to 2690 MHz Antennas

109

1710 – 2200 MHz • X Polarization • Adjustable / Fixed Electrical Downtilt

1710 – 2690 MHz • XX Polarization1710 – 2170 / 2490-2690 MHz • XX Polarization1710 – 2180 MHz • V Polarization2490 – 2690 MHz • X and XX PolarizationTrisector • 1710-2170 MHz • X Polarization • Adjustable Electrical Downtilt

See the following page for summary list.

1710 – 2690 MHz • X Polarization • Adjustable / Fixed Electrical Downtilt







A N T E N N A S

Kathrein’s range of advanced antenna products for PCS and the AWS bands is unmatched, for

broadness of product line.

Most antennas within this category feature cross polarized (X-Pol) radiating systems and are ideal for

monopole diversity applications. Most include fully adjustable down-tilt (ADT), allowing site optimization

without replacing antennas, and may be equipped for optional remote downtilt control.

Within this group of antennas are several that are multiband; two independent X-pol antenna systems

provide for isolated operation within the 1710-2200 MHz band. Such antennas may be utilized for

segmented operation by protocol or spectrum usage – TDMA vs. GSM or PCS vs. AWS, or to resolvecapacity issues.

1710-2690 MHz Antennas

1710 to 2690 MHz Antennas

110

1710 – 2170 / 2490-2690 MHz • XX Polarization • Adjustable Electrical Downtilt


65° 1710–2170 MHz 17.5 dBi 800 10644 0°– 10° ADT* 2 x +45° and -45° 55.5 inches 120

2490–2690 MHz 18 dBi 0°– 10° ADT*

1710 – 2690 MHz • XX Polarization • Adjustable / Fixed Electrical Downtilt



1710–2690 MHz 17.8 dBi 800 10622 0°– 12° ADT* 2 x +45° and -45° 55.7 inches 125

1710 – 2180 MHz • V Polarization


13° 1710–2180 MHz 18.4 dBi 800 10368 0° V 11.8 inches 154



48° 2496–2690 MHz 18 dBi 840 10046 0°– 10° ADT* +45° and -45° 42 inches 155

2496 – 2690 MHz • X Polarization


87° 2496–2690 MHz 16 dBi 840 10054B 0°– 10° ADT* 2 x +45° and -45° 42 inches 156

2496 – 2690 MHz • XX Polarization

Horizontal ElectricalBeamwidth Gain Model Downtilt Polarization Height Page

65° 15.5 dBi 800 10375 0°–12° +45° and -45° 48.9 inches (1241 mm) 157

17.8 dBi 800 10360 0°–10° +45° and -45° 71.8 inches (1823 mm) 158

850 10010 Flexible Sealing Frame for Trisector Antenna 159

Trisector • 1710-2170 MHz • X Polarization • Adjustable Electrical Downtilt




Horizontal pattern



0–12° electrical downtilt

0 0

3

0 6

90

0 2 1

0 5

1

180 0 1

2

0 4 2

270

0 0 3

0 3 3

3

10

20

30

0 0

3

0 6

90

0 2 1

0 5

1

180 0 1

2

0 4 2

270

0 0 3

0 3 3

3

10

20

30

Mounting Equipment:

Model Description






VSWR <1.5:1

Impedance 50 ohms



Front-to-back ratio >30 dB (co-polar)(180° ± 30°)



Trascking, average 1 dB

Squint ±1°













Sidelobe suppression for 0° 6° 12° T 0° 6° 12° T 0° 6° 12° Tfirst sidelobe above horizon 15 17 17 dB 15 17 17 dB 15 17 17 dBHorizontal pattern >18 dB >17 dB >15 dB


11299-A936.3929/A

1710-2170

-45°1710-2170

+45°

7-16 DIN 7-16 DIN

–45 +45

11.8 inches

(299 mm)



2.7 inches(69 mm)


2.625 inches ± 0.125(68 mm ± 4)

35°

1710–2170 MH

X - POL


0°–12°

Remote Control Op

800 10251V0

Profile PF8





Horizontal pattern




–45 +45

11.8 inches

(299 mm)

55.9 inches

(1421 mm)


2.7 inches

(69 mm)


2.625 inches ± 0.125(68 mm ± 4)

Mounting Equipment:

Model Description






VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dBMaximum input power 300 watts (at 50°C) per input

Tracking 0.5 dB

Squint ±1°











Horizontal sidelobe suppression >14 dB >14 dB >14 dB



Sidelobe suppression for: 0° 4° 8° T 0° 4° 8° T 0° 4° 8° TFirst sidelobe above main beam 18 17 16 dB 18 18 17 dB 18 17 16 dB


11280-A936.3977/a

1710-2170-45°

1710-2170+45°

7-16 DIN 7 -16 DIN

35°

1710–2170 MHz

X - POL


0°–8°


742 351V01

Profile PF8








Mounting Equipment:

Model Description






VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB

Maximum input power 300 watts (at 50°C) per inputTracking 0.5 dB

Squint ±1.5°










2.7 inches(69 mm)

7.8 inches(199 mm)

2.5 inches

(64 mm)


1710-2170+45°

7-16 DIN

7-16 DIN1710-2170

-45°

11289-B936.3939/a


Gain 19 dBi 19.5 dBi 19.6 dBi

Front-to-back ratio >27 dB (co-polar) >30 dB (co-polar) >27 dB (co-polar)(180°±30) >25 dB (total power) >25 dB (total power) >25 dB (total power)




Sidelobe suppression: 0° 2° 5° 8° T 0° 2° 5° 8° T 0° 2° 5° 8° Tfirst sidelobeabove main beam 17 17 15 15 dB 18 18 17 17 dB 18 18 15 15 dBHorizontal pattern >18 dB >18 dB >18 dB


45°

1710–2170 MH

X - POL


0°–8°

Remote Control Op

742 218V0

Profile PF6







VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB

Maximum input power 300 watts (at 50°C) per inputTracking, average 1 dB

Squint ±2°









Average gain tilt 0° 3° 6° 0° 3° 6° 0° 3° 6°dBi 20.5 20.6 20.3 20.9 21.1 20.9 21 21.4 21

Front-to-back ratio >28 dB (co-polar) >27 dB (co-polar) >25 dB (co-polar)(180°±30°) >25 dB (total power) >25 dB (total power) >25 dB (total power)




Sidelobe suppression: 0° 2° 4° 6° T 0° 2° 4° 6° T 0° 2° 4° 6° Tfirst sidelobe above main beam 18 18 16 16 dB 18 18 17 16 dB 18 18 17 16 dBHorizontal pattern >18 dB >18 dB >18 dB





0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

11290-B936.3941/a

1710/2180

+45°7-16 DIN

7-16 DIN1710/2180

-45°

Mounting Equipment:

Model Description




82 inches

(2082 mm)

76.6 inches

(1946 mm)

2.7 inches(69 mm)

7.8 inches

(199 mm)

80.8 inches

(2052 mm)

2.5 inches(64 mm)

45°

1710–2180 MHz

X - POL


0°–6°


742 219V01

Profile PF6




1710–2200 MHz Split Beam Panel AntennaXX Polarization

Mounting Equipment:

Model Description


742 034 Three-panel Sector Mounting Kit(120 deg. ea.) for 5.5 inch(139.7 mm) OD mast.




Azimuth direction Beam A (-30°), Beam B (+30°)

Impedance 50 ohms

VSWR < 1.5:1


Polarization +45°, -45°, +45°, -45°

Front-to-back ratio >30 dB (co-polar)>25 dB (total power)



Isolation >30 dB

Horizontal patternSidelobe suppression for >18 dBsidelobes beside main beam

Vertical patternSidelobe suppression for >18 dBfirst sidelobe above main beam

Electrical downtilt 0°–10° (continuously adjustable)


Dimensions 51.7 x 15 x 5.9 inches (1314 x 380 x 150 mm)





11308-A936.4001/a


Gain 4 x 19 dBi 4 x 19.3 dBi 4 x 19.5 dBi

Horizontal beamwidth 47° (half-power) 45° (half-power) 43° (half-power)(offset beams ±30°)

Vertical beamwidth 7.2° (half-power) 7.1° (half-power) 6.8° (half-power

Cross polar ratioMain direction -30°; +30° 18 dB (typical) 17 dB (typical) 16 dB (typical)Sector -60°; 0°; 0°; +60° >13 dB >13 dB >13 dB

45°

1710–2200 MH

XX - POL


0°–10°

Remote Control Op

800 10606V0

Horizontal pattern



Beam A (-30°), Beam B (+30°)


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1710–2200+45

Beam B(+30)

1710–2200+45

Beam A(–30)

7-16 7-16

1710–2200–45

Beam B(+30)

7-16

1710–2200–45

Beam A(–30)

7-16

51.7 inches

(1314 mm)

5.9 inches(150 mm)

15 inches

(380 mm)


58.4 inches

(1484 mm)

2.625 inches ± 0.125

(68 mm ± 4)

R C UR C U

– 4 5 ° + 4 5 ° + 4 5 °

– 4 5 °

Layout of interface B e

a m B ( + 3

0 ° )B e

a m A ( – 3 0 ° )


Beam A Beam B



30°

210°

60°

240°

90°270°

120°

300°

150°

330°

180°

0°

Antenna IBeam A

Antenna IIBeam B

Antenna IIBeam A

Antenna IIIBeam B

Antenna IIIBeam A

Antenna IBeam B

0

3

6

10

20

D o u t

4 7 0 m m

Antenna I

Antenna IIAntenna III

Horizontal Patterns (top view)

Bottom view

A

Torque 5.9 ft-lb

(8 Nm)

B

C

D

60°

Mounting support clamp

E

F

3 sector clamp

(supports the antenna assemblyduring azimuth adjustment)

Specifications: 742 034 Sector Bracket

Angle between antennas 120°

Suitable for mast diameter* 5.5 inches (139.7 mm) OD.

Number of pieces 2 x 3 sector clamp2 x mounting support clamp

Materials3 sector clamp Hot-dip galvanized steelMounting support clamp AluminumFasteners Stainless steel

Outer diameter (Dout) of the 18.5 inches (470 mm)3 Dual-beam Panel Arrangement

* Customer assumes all responsibility to ensure that the mountingpipe is adequate to support the intended load. For use with steelpipe only (not aluminum) with a minimum 0.25 inch (6 mm) wall

thickness.

1710–2200 MHz Split Beam Panel AntennaXX Polarization

800 10606V01

Specifications: 3 Panel Arrangement



(950 N) / (950 N) / (950 N)


Dimensions: 742 034 sector bracket with 800 10606 antennasA B C D E F Dout

inches 5.5 3.9 9.3 9 1.9 1.8 18.5mm 139.7 100 236 228 49 45 470





VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB


Electrical downtilt 0–8 degreescontinuously adjustable

Tracking 0.5 dB

Squint ±1.5°




(360 N) / (140 N) / (360 N)Mounting category L (Light)



(1672 x 172 x 112 mm)Shipping weight 22 lb (10 kg)







Sidelobe suppression for 0° 4° 8° 0° 4° 8° 0° 4° 8°first sidelobe above main beam >18 14 14 dB >18 15 15 dB >18 15 15 dB


11235-A936.3588/a

62°

1710–2200 MH

X - POL


0°–8°

Remote Control Op

800 10636



Horizontal pattern


Mounting Equipment:

Model Description




1710–2200–45

1710–2200+45

7-16 7-16

6.1 inches

(155 mm)

55.4 inches

(1407 mm)


2.8 inches(70 mm)

57 inches

(1449 mm)

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PF10






VSWR <1.5:1

Impedance 50 ohms




Electrical downtilt 0°–12° (continously adjustable)

(manual or remote control)Isolation, between ports >30 dB


Weight 11 lb (5 kg)









Gain 15.5 dBi 16.3 dBi 16.7 dBi 16.7 dBi

+45° and -45° polarization 67° (half-power) 64° (half-power) 60° (half-power) 60° (half-power)horizontal beamwidth


Front-to-back ratio >25 dB >25 dB >23 dB >23 dB(180°±30°)

Sidelobe suppression for: 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° TFirst sidelobe above main beam >12 13 15 dB >13 14 15 dB >13 14 16 dB >15 15 17 dB

Cross polar ratio 0° 25 dB (typical) 28 dB (typical) 28 dB (typical) 28 dB (typical)Sector ±60° >9 dB >8 dB >8 dB >11 dB

11214-B936.4019/a

Mounting Equipment:

Model Description

734 365 Mounting Kit for 1.8 to 4.9 inch(45 to 125 mm) OD mast.


850 10013 Tilt Mount Kit(optional) 0–25 degrees downtilt angle for use with

2 x 738 546 mounting kit


6.1 inches

(155 mm)

–45 +45

33.5 inches(851 mm)

36.5 inches(926 mm)

2.8 inches(70 mm)

35.3 inches(896 mm)

2.625 inches ±

0.125

65°

1710–2690 MHz

X - POL

ustable Electrical Downtilt

0°–12°


800 10681

Profile PF5

1710–2690–45

1710–2690+45

7-16 7-16



Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30






VSWR <1.5:1

Impedance 50 ohms




Electrical downtilt 0°–12° (continously adjustable)

(manual or remote control)Isolation, between ports >30 dB













+45° and -45° polarization 11° (half-power) 10° (half-power) 9° (half-power) 8.7° (half-power)vertical beamwidth

Front-to-back ratio (co-polar) >30 dB >30 dB >30 dB >28 dB

Sidelobe suppression for 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° TFirst sidelobe above main beam >12 13 15 dB >13 14 16 dB >13 15 16 dB >15 15 17 dB


11215-A936.3770/b

Mounting Equipment:

Model Description




65°

1710–2690 MH1710–2690 MH

XX - POL


0°–12°Remote Control Op

800 10682

1710–2690–45

1710–2690+45

7-16 7-16

1710–2690+45

7-16

1710–2690–45

7-16

33.7 inches(855 mm)


2.8 inches

(71 mm)

36.2 inches(920 mm)

2.625 inches ± 0.125(68 mm ± 4)

12.7 inches

(323 mm)



Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PF8





Frequency range 1710–2170 MHz / 2490–2690 MHz

VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB (intrasystem)

>29 dB (intersystem)Weight 22 lb (10 kg)

26.5 lb (12 kg) clamps included







1710–2170 MHz / 2490–2690 MHz Panel AntennaXX Polarization


Gain 17.5 dBi 17.7 dBi 18 dBi+45° and -45° polarization 68° (half-power) 65° (half-power) 61° (half-power)horizontal beamwidth



Electrical downtilt 0–10 degrees 0–10 degrees 0–10 degreescontinuously adjustable

Sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above main beam >17 17 16 dB >17 17 16 dB >17 17 16 dB


Maximum input power 200 watts per input 200 watts per input(at 50°C) 400 watts total 400 watts total

11311-B936.3803/a

Mounting Equipment:

Model Description


850 10013 Tilt Mount Kit(optional) 0–15 degrees downtilt angle


65°

1710–2170 MHz2490–2690 MHz

XX - POL


0°–10°

800 10644

2490–2690 MHz




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1710–2170 MHz

Horizontal pattern


Vertical pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

NE W

Profile PF11






3.5 inches(89 mm)


6.1 inches(155 mm)

2.625 inches ± 0.125(68 mm ± 4)

1710–2170+45

2490–2690–45

7-16 7-16

1710–2170–45

7-16

2490–2690+45

7-16

1710–2170 MHz / 2490–2690 MHz Panel AntennaXX Polarization

800 10644




11298-A936.3924/b



VSWR <1.4:1

Impedance 50 ohms




Isolation >30 dB

Maximum input power 300 watts (at 50°C) per inputTracking, average 0.5 dB

Squint ±2°








Specifications: 1710–1880 MHz 1850–1990 MHz 1920–2200 MHzGain tilt 0° 4° 8° 12° 0° 4° 8° 12° 0° 4° 8° 12°

dBi 15.5 15.4 15.3 15.1 15.6 15.5 15.4 15 15.8 15.7 15.5 14.9



Electrical downtilt 0°–12° 0°–12° 0°–12°continously adjustable


Sidelobe suppressionfor first sidelobe tilt 0° 4° 8° 12° 0° 4° 8° 12° 0° 4° 8° 12°above main beam dB > 14 14 14 14 14 14 14 14 14 14 14 14





7 -16 DIN 7-16 DIN

1710/2200-45°

1710/2200+45°

–45 +45

28.9 inches(735 mm)

32.2 inches(819 mm)

2.7 inches(69 mm)

31 inches

(789 mm)

6.1 inches(155 mm)

2.5 inches(64 mm)

65°

1710–2200 MHz

X - POL

ustable Electrical Downtilt0°–12°


800 10247V01

Profile PF5

Mounting Equipment:

Model Description


732 327 Tilt Kit for use with the abovemounting kits,0–40 degrees downtilt angle.





–45 +45



2.8 inches(70 mm)


6.1 inches(155 mm)

2.5 inches(64 mm)



VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB



Tracking 0.5 dB

Squint ±1.5°







(1595 x 172 x 92 mm)Shipping weight 22 lb (10 kg)


11236-A936.3531/a

Mounting Equipment:

Model Description




65°

1710–2200 MH

X - POL


2°–10°

Remote Control Op

800 10614V0







Sidelobe suppressionin the sector 40°–180° below >23 dB >24 dB >25 dBhorizon for Tx-Frequencies


1710–2200–45

1710–2200+45

7-16 7-16



Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PF5





11261-A936.3887b



VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB

Maximum input power 300 watts per inputTracking 1.0 dB

Squint ±2.5°

Weight 17.6 lb (8 kg)22 lb (10 kg) clamps included







Mounting Equipment:

Model Description


850 10013 Tilt Kit for use with above mounting kit(optional) 0–15 degrees downtilt angle.



Gain 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T17.4 17.4 17.3 dBi 18.2 18 17.9 dBi 18.2 18.1 17.7 dBi 18.3 18 17.6 dBi

Front-to-back ratio (180°±30°) >25 dB >25 dB >25 dB >25 dB



Electrical downtilt 0°–12° 0°–12° 0°–12° 0°–12°continuously adjustable (manual or optional remote control)

Sidelobe suppression 0° 6° 12° T 0° 6° 12° T 0° 6° 12° 0° 6° 12° Tfirst sidelobe above main beam >18 18 18 dB >18 18 18 dB >18 17 17 dB >18 18 16 dBwithin 0°–20° sector above horizon >17 17 16 dB >17 17 16 dB >16 18 17 dB >15 15 14 dB

Cross polar ratioMain direction 0° 25 dB (typical) 25 dB (typical) 25 dB (typical) 25 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB

65°

1710–2690 MHz

X - POL



800 10621V01

Profile PF8




2.5 inches(64 mm)

1710–2690–45

1710–2690+45

7-16 7-16




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

2.7 inches

(69 mm)

6.1 inches(155 mm)

–45 +45





11237-B936.3621/b



VSWR <1.5:1

Impedance 50 ohms




Electrical downtilt 0°–12° (continously adjustable)(manual or remote control)

Isolation, between ports >30 dB










Gain 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T17.4 17.4 17.3 dBi 17.8 17.6 17.5 dBi 18 17.9 17.5 dBi 18 17.7 17.3

dBi



Front-to-back ratio (180°±30°) >25 dB, avg 28 dB >26 dB, avg 28 dB >25 dB, avg 27 dB >25 dB, avg 27 dB

Sidelobe suppression for: 0° 6° 12° T 0° 6° 12° T 0° 6° 12° T 0° 6° 12° TFirst sidelobe above main beam >18 18 18 dB >18 18 18 dB >18 17 17 dB >18 18 17 d


65°

1710–2690 MH1710–2690 MH

XX - POL


0°–12°Remote Control Op

800 10622

Profile PF8




2.625 inches ± 0.125(68 mm ± 4) 1710–2690

–45

1710–2690+45

7-16 7-16

1710–2690+45

7-16

1710–2690–45

7-16

Mounting Equipment:

Model Description







0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

2.8 inches

(71 mm)

12.7 inches(323 mm)







Impedance 50 ohms

VSWR < 1.5:1



Front-to-back ratio 30 dB (co-polar)


Electrical downtilt 0–8 degreescontinuously adjustable (manual or optional remote control)


Isolation >30 dB

Tracking 1 dB

Squint ±2.5°


Dimensions approx. 45 x 6.1 x 2.8 inches (1142 x 155 x 70 mm)









Sidelobe suppression for: 0° 4° 8° T 0° 4° 8° T 0° 4° 8° T

1st sidelobe above horizon, avg. 20 20 20 dB 20 20 20 dB 20 20 20 dB

Cross polar ratio 0° 25 dB (typical) 25 dB (typical) 28 dB (typical)Sector ±60° >10 dB >10 dB >10 dB

11266-A936.3886/a

Mounting Equipment:

Model Description




65°

1710–2170 MHz

X - POL


0°–8°


742 214V01


6.1 inches

(155 mm)

45 inches(1142 mm)

2.8 inches(70 mm)

2.5 inches(64 mm)


1710–2170-45°

1710–2170+45°

7 -16 DIN 7-16 DIN

Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PF5







Impedance 50 ohms

VSWR < 1.5:1



Front-to-back ratio >30 dB (co-polar)(180° ±30°) >25 dB (total power)




Isolation >30 dB



Squint ±1.5°




(330 N) / (90 N) / (340 N)








Vertical Pattern–sidelobe 0° 4° 8° 10° 0° 4° 8° 10° 0° 4° 8° 10°suppression for first side- 18 18 17 17 dB 18 18 17 17 dB 18 18 17 17 dBlobe above main beam

11272-A936.3733/b

Horizontal pattern




Mounting Equipment:

Model Description




1710–2200-45°

1710–2200+45°

7-16 DIN 7-16 DIN




2.5 inches(64 mm)

65°

1710–2200 MH

X - POL


0°–10°

Remote Control Op

742 215V01

6.1 inches(155 mm)

2.8 inches(70 mm) Profile PF10




1710–2200 MHz Panel AntennaX Polarization with Integrated Remote Downtilt

Mounting Equipment:

Model Description






Impedance 50 ohms

VSWR < 1.5:1






Connector 2 x 7- 16 DIN female

Isolation >30 dB



Dimensions 51.3 x 6.1 x 2.7 inches (1302 x 155 x 69 mm)


(330 N) / (115 N) / (390 N)



Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

10920-F936.2890/e





Sidelobe suppression for 0° 4° 8° 10° 0° 4° 8° 10° 0° 4° 8° 10°first sidelobe above main beam 16 16 16 16 dB 17 17 17 17 dB 17 17 17 17 dB

IRT specifications:


Power Consumption < 1 W (standby); < 8.5 W (motor activated)

Hardware interface1 2 x 8 pin connector according to IEC 60130-9;IRT in (male): Control / Daisy chain in, conforming with AISGIRT out (female): Daisy chain out, conforming with AISG

Logical interface2 AISG 1.1 800 10314ex factory 3GPP / AISG 2.0 800 10618

Protocols AISG 1.1 and 3GPP / AISG 2.0 compliant




65°

1710–2200 MHz

X - POL

djustable Electrical Downtilt

0°–10°

with IntegratedRemote Downtilt

00 10314, 800 10618

Profile PF51 Tightening torque for fixing the connector must

lie between 0.5 – 1.0 Nm (0.36–0.73 lb/ft).

2 The protocol of the logical interface canbe switched from AISG 1.1 to 3GPP/AISG2.0 and vice versa with a vendor specificcommand. Start-up operation of the 800

10314 is only possible with a primary stationsupporting AISG 1.1 and start-up operationof the 800 10618 is only possible with aprimary station supporting 3GPP/AISG 2.0!Please note: The used Primary-SW has tobe able to handle also integrated remote tiltunits, like Kathrein CCU with firmware 1.29or higher and the Kathrein PCA with SW 2.0or higher. If the Primary of the system doesn’tsupport the standard of the ‘logical interfaceex factory’, the IRT must be switched to theappropriate standard of the Primary beforeinstallation. Please contact Kathrein for furtherinformation.

Order Information:

Model Description

800 10314 Antenna with AISG 1.1 linterface0°–10° adjustable electrical downtilt

800 10618 Antenna with 3GPP / AISG 2.0 interface

0°–10° adjustable electrical downtilt



6.1 inches

(155 mm)

54.6 inches

(1386 mm)

51.3 inches

(1302 mm)

2.7 inches

(69 mm)


2.5 inches(64 mm)

–45 +45

800 10314, 800 101710–2200 MHz Panel Antenna X Polarization with Integrated Remote Downtilt

Connecting the control cables:

1. Stand alone / Star configuration:Connect the control cable to the ‘IRT in’ input of the antenna. If daisy chain is notrequired, do not remove the protection cap of the ‘IRT out’ input.

2. Daisy chain configuration:For the daisy chain solution, remove the protection cap (IRT out) and create a bondingto the subsequent antenna (IRT in) via additional control cable. Do not removethe protection cap of the last ‘IRT out’.

Please note: The connector should be hand tightened only!

The tightening torque must be in the range of 0.37–0.74 lb/ft (0.5 – 1.0 Nm).

25

3

7 8 6

1

4

Pin 1 10 ... 30 VDC in 10 ... 30 VDC out

Pin 2 Not connected Not connected

Pin 3 RS485-B RS485-B


Pin 5 RS485-A RS485-A

Pin 6 10 ... 30 VDC in 10 ... 30 VDC out

Pin 7 DC return DC return

(grounded) (grounded)


2

8

4

1 3

5

6 7

Pin assignment for IRT interface:

8 - p i n c o n n e c t o r

( I E C

6 0 1 3 0 - 9 )

male female



KATHREIN 800 10314, 800 10618

Tested To Comply

With FCC Standards



1710–2200 MHz Panel Antenna with Extended Downtilt RangeX- polarization






VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB


Squint ±2°







11305-A936.3927/b

–45 +45


2.7 inches(69 mm)


6.1 inches(155 mm)

2.5 inches

(64 mm)


65°

1710–2200 MHz

X - POL


800 10504V01

Profile PF5



Front-to-back ratio (180° ±30°) > 25 dB (co-polar) > 25 dB (co-polar) > 25 dB (co-polar) > 25 dB (co-polar)

Horizontal beamwidth 68° (half-power) 66° (half-power) 64° (half-power) 62° (half-power)

Vertical beamwidth 7.9° (half-power) 7.5° (half-power) 7.2° (half-power) 7° (half-power)


Sidelobe suppression 0° 5° 10° 15° T 0° 5° 10° 15° T 0° 5° 10° 15° T 0° 5° 10° 15° Tfirst sidelobe above main beam >17 20 18 17 dB >16 20 18 17 dB >16 20 18 17 dB >15 20 18 15 dBwithin 0°–20° sector above horizon >16 18 18 16 dB >16 18 17 16 dB >15 18 17 16 dB >15 16 16 15 dB

Cross polar ratio

Main direction 0° 22 dB (typical) 22 dB (typical) 24 dB (typical) 26 dB (typical)Sector ±60° >10 dB >10 dB >10 dB >10 dB

Null-fill at 0° tilt 21 dB 20 dB 19 dB 18 dB

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Mounting Equipment:

Model Description







1710–2200 MHz Panel Antenna with Extended Downtilt RangeX- polarization


VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB


Trackin, average 0.5 dBSquint ±2.5°

Weight 24.3 lb (11 kg)28.7 lb (13kg) clamps included







11306-B936.3928/a

–45 +45

78.1 inches

(1984 mm)

2.7 inches(69 mm)

81.4 inches

(2068 mm)

6.1 inches(155 mm)

2.5 inches(64 mm)

80.2 inches

(2038 mm)


Gain 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T(dBi) 18.5 18.7 18.5 18.7 19 18.5 18.7 19 18.4 18.7 18.9 18.3

Front-to-back ratio (180° ±30°) > 30 dB (co-polar) > 30 dB (co-polar) > 27 dB (co-polar) > 26 dB (co-polar)


Vertical beamwidth 5° (half-power) 4.8° (half-power) 4.6° (half-power) 4.4° (half-power)




Mounting Equipment:

Model Description




65°

1710–2200 MH

X - POL


800 10505V0

Profile PF5




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30







VSWR < 1.5:1

Impedance 50 ohms



Front-to-back ratio >30 dB (co-polar)(180°±30°) >25 dB (total power)




Isolation >30 dB



Squint ±2.0°












Sidelobe suppression for first 0° 2° 4° 6° T 0° 2° 4° 6° T 0° 2° 4° 6° Tsidelobe above main beam 18 18 16 15 dB 18 18 17 16 dB 18 18 18 18 dB

11271-B936.3740/b

Mounting Equipment:

Model Description


850 10013 Tilt Kit for use with above mounting kits,(optional) 0–11 degrees downtilt angle.


1710–2200-45°

1710–2200+45°

7 -16 DIN 7 -16 D IN


6.1 inches

(155 mm)


2.8 inches(70 mm)

2.5 inches(64 mm)


65°

1710–2200 MHz

X - POL


0°–6°


742 213V01

Profile PF5



Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30







VSWR <1.5:1

Impedance 50 ohms




Electrical downtilt 0°–6° (continously adjustable)(manual or remote control)









11377-A936.4200

Mounting Equipment:

Model Description




65°

1710–2690 MH

X - POL


0°–6°

800 10651

Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30


Gain 18.5 dBi 19 dBi 19.4 dBi 19.5 dBi


+45° and -45° polarization 5.4° (half-power) 4.9° (half-power) 4.3° (half-power) 4° (half-power)vertical beamwidth


Sidelobe suppression for: 0° 3° 6° T 0° 3° 6° T 0° 3° 6° T 0° 3° 6° TFirst sidelobe above main beam >16 17 16 dB >17 17 16 dB >17 17 16 dB >17 17 17 dB


65.7 inches

(1670 mm)



2.5 inches(64 mm)

2.8 inches(70 mm)

6.1 inches(155 mm)

–45 +45

1710–2690

–45

1710–2690

+45

7-16 7-16

NE W

Profile PF5










Sidelobe suppression for 0° 3° 6° 0° 3° 6° 0° 3° 6°first sidelobe above main beam >18 18 17 dB >18 17 17 dB >17 17 17 dB

First null-fill at 0° tilt 20 dB 20 dB 20 dB


Sector ±60° >10 dB >10 dB >10 dB



VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB

Maximum input power 300 watts (at 50°C) per inputElectrical downtilt 0–6 degreescontinuously adjustable


Squint ±2.5°




(660 N) / (260 N) / (730 N)




11026-A936.3921

Mounting Equipment:

Model Description




65°

1710–2200 MHz

X - POL


0°–6°

800 10378

1710–2200–45

1710–2200+45

7-16 7-16

6.1 inches(155 mm)

100.3 inches(2548 mm)

103.7 inches(2635 mm)

3.5 inches(89 mm)

102.6 inches(2605 mm)

2.625 inches ± 0.125(68 mm ± 4)

Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Profile PF11




1710–2200 MHz Panel Antenna with Extended Downtilt RangeXX- polarization




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30



VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB

Maximum input power 300 watts (at 50°C) per inputWeight 37.5 lb (17 kg)








11307-A936.3986/a



Front-to-back ratio > 30 dB (co-polar) > 30 dB (co-polar) > 30 dB (co-polar) > 28 dB (co-polar)(180° ±30°)


Vertical beamwidth 7.9° (half-power) 7.5° (half-power) 7.2° (half-power) 6.9° (half-power)




Null-fill at 0° tilt 23 dB 22 dB 21 dB 20 dB

65°

1710–2200 MH

XX - POL


0°–15°

Remote Control Op

800 10510V0

Mounting Equipment:

Model Description





2.8 inches(71 mm)


12.7 inches

(323 mm) 3.9 inches(98 mm)


2.625 inches ± 0.125

(68 mm ± 4)


1710–2200 Left

–45 –45

+45

Right 1710–2200+45

RCURCU

Layout of interface

Profile PF8




1710–2200 MHz Panel Antenna with Extended Downtilt RangeXX- polarization



VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB









11337-B936.4057/a


Gain (dBi) 18.5 18.7 18.5 18.7 19 18.5 18.7 19 18.4 18.7 18.9 18.3Tilt 0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 5° 10°

Front-to-back ratio > 30 dB (co-polar) > 30 dB (co-polar) > 30 dB (co-polar) > 28 dB (co-polar)(180° ±30°)


Vertical beamwidth 5° (half-power) 4.8° (half-power) 4.6° (half-power) 4.4° (half-power)




Mounting Equipment:

Model Description





2.8 inches(71 mm)


12.7 inches(323 mm)

3.9 inches(98 mm)


2.625 inches ± 0.125

(68 mm ± 4)




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

65°

1710–2200 MHz

XX - POL


0°–10°


800 10511V01

Profile PF8




1710–2170 MHz Panel Antenna

X Polarization




Mounting Equipment:

Model Description


732 327 Tilt Kit for use with the above(optional) mounting kits,

0–20 degrees downtilt angle.




VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dB


Tracking 0.5 dB

Squint ±3.5°









Gain 13.7 dBi 14 dBi 14.1 dBi


Vertical beamwidth 14.7° (half-power) 14° (half-power) 13° (half-power)


Sidelobe suppression for 0° 4° 8° 10° T 0° 4° 8° 10° T 0° 4° 8° 10° Tfirst sidelobe above horizon 18 18 18 18 dB 18 18 18 18 dB 18 18 18 18 dB


11283-A936.3957/a

1710–2170

-45°

1710–2170

+45°

7- 16 DIN 7 -16 D IN

88°

1710–2170 MH

X - POL


0°–10°

Remote Control Op

741 988V0

Profile PF5

26.1 inches(662 mm)

2.5 inches(68 mm)

29.3 inches(746 mm)

28.2 inches(716 mm)

6.1 inches

(155 mm)

2.7 inches(69 mm)





1710–2200-45°

1710–2200+45°

7-16 DIN 7 -16 DIN



Impedance 50 ohms

VSWR < 1.5:1






Isolation >30 dB

Tracking 0.5 dB

Squint ±2.0°








Horizontal pattern




Mounting Equipment:

Model Description




11268-A936.3843/a



±45° polarization 88° (half-power) 88° (half-power) 88° (half-power)horizontal beamwidth

±45° polarization 7° (half-power) 6.7° (half-power) 6.5° (half-power)vertical beamwidth

Sidelobe suppressionfor first sidelobe 0° 2° 5 8° T 0° 2° 5° 8° T 0° 2° 5° 8° Tabove main beam 18 18 16 14 dB 20 20 18 17 dB 18 18 18 17 dB



(180°±30°) >25 dB (total power) >25 dB (total power) >24 dB (total power)



2.5 inches(68 mm ± 4)


88°

1710–2200 MHz

X - POL


0°–8°


741 989V01

Profile PF5

6.1 inches(155 mm)

2.7 inches(69 mm)







Horizontal pattern




2.5 inches(68 mm ± 4)


1710–2170-45°

1710–2170+45°

7 -16 D IN 7-16 DIN


Gain 17.7 dBi 18 dBi 18.2 dBi






Impedance 50 ohms

VSWR < 1.5:1







Isolation >30 dB


Tracking 0.5 dB

Squint ±2.5°








11284-A936.3926/a

Mounting Equipment:

Model Description




88°

1710–2170 MH

X - POL


Remote Control Op

741 990V01

Profile PF5

6.1 inches(155 mm)

2.7 inches(69 mm)







VSWR <1.5:1

Impedance 50 ohms





Isolation >30 dB









11291-A936.3985/a

0 0

3

0 6

90

0 2 1

0 5

1

180 0 1

2

0 4 2

270

0 0 3

0 3 3

3

10

20

30

0 0

3

0 6

90

0 2 1

0 5 1

180 0

1 2

0 4 2

270

0 0 3

0 3

3

3

10

20

30

Horizontal pattern




Mounting Equipment:

Model Description







Vertical beamwidth 14° (half-power) 13.7° (half-power) 13° (half-power)



Cross polar ratioMain direction 0° 20 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° 10 dB (typical) 10 dB (typical) 10 dB (typical)

1710–2170 Left

–45 –45

+45

Right 1710–2170+45

RCURCU

Layout of interface

26.8 inches(679 mm)

2.8 inches

(71 mm)

35 inches(889 mm)

3.9 inches

(98 mm)

12.7 inches(323 mm)

29.3 inches(744 mm)

2.625 inches ± 0.125

(68 mm ± 4)

742 233V01

65°

1710–2170 MHz1710–2170 MHz

XX-POL



Profile PF8





11293-C936.4021/d



Impedance 50 ohms

VSWR < 1.5:1





Electrical downtilt 0–8 degrees

continuously adjustable (manual or optional remote control)Connector 4 x 7-16 DIN female

Isolation >30 dB


Weight 27.6 lb (12.5 kg)32 lb (14.5 kg) clamps included









+45° and -45° polarization 8.3° (half-power) 8° (half-power) 7.5° (half-power)vertical beamwidth

Sidelobe suppression for first 0° 4° 8° T 0° 4° 8° T 0° 4° 8° Tsidelobe above main beam 20 20 18 dB 20 20 18 dB 20 20 18 dB

Mounting Equipment:

Model Description




2.8 inches(71 mm)

12.7 inches

(323 mm)

53.4 inches

(1357 mm)

45.2 inches

(1147 mm)

47.7 inches

(1212 mm)

2.625 inches ± 0.125

(68 mm ± 4)

3.9 inches

(98 mm)

742 237

65°

1710–2170 MH1710–2170 MH

XX-POL


0°–8°

Remote Control Op

Profile PF8

1710–2170 Left

–45 –45

+45

Right 1710–2170

+45RCURCU

Layout of interface



Horizontal pattern


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Mounting Clamps IncludedNE W




11273-B936.3781/a



Impedance 50 ohms

VSWR < 1.5:1







Isolation >30 dB







Shipping dimensions 62 x 14.2 x 5.1 inches (1574 x 360 x 130 mm)





Sidelobe suppression for first 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tsidelobe above main beam 20 18 16 dB 20 18 16 dB 16 18 16 dB

Vertical pattern±45°- polarization0–10° electrical

Horizontal pattern


Mounting Equipment:

Model Description




2.8 inches(71 mm)

12.7 inches

(323 mm)

60.2 inches

(1529 mm)

51.9 inches

(1319 mm)

54.5 inches

(1384 mm)

2.625 inches ± 0.125

(68 mm ± 4)

3.9 inches

(98 mm)

742 236V01

65°

1710–2200 MHz1710–2200 MHz

XX-POL


0°–10°


Profile PF81710–2200 Left

–45 –45

+45

Right 1710–2200+45 RCURCU

Layout of interface




Mounting Equipment:

Model Description






Horizontal pattern




Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)>25 dB (total power) >25 dB (total power) >24 dB (total power)




Vertical Pattern – Sidelobe 0° 2° 4° 6° T 0° 2° 4° 6° T 0° 2° 4° 6° Tsuppression for first 17 17 14 14 dB 17 17 15 15 dB 17 17 15 15 dBsidelobe above main beam




VSWR <1.5:1

Impedance 50 ohms




Isolation >30 dB


Squint ±2.5°








11292-B936.3993/a


2.8 inches(71 mm)

3.9 inches(98 mm)

12.7 inches

(323 mm)



2.625 inches ± 0.125(68 mm ± 4)


742 235V01

65°

1710–2170 MH1710–2170 MH

XX-POL


Remote Control Op

Profile PF8






VSWR <1.5:1

Impedance 50 ohms







Isolation intrasystem >30 dBintersystem >30 dB

Tracking 0.5 dB

Squint ±2.5°









Average gain (dBi) 0° 5° 10° T 0° 5° 10° T 0° 5° 10° T16.1 16.3 16 16.2 16.4 16.1 16.5 16.7 16.2



Electrical downtilt 0°–10° 0°–10° 0°–10°continuously adjustable(manual or optional remote control)

Vertical Pattern – Sidelobe 0° 4° 8° 10° T 0° 4° 8° 10° T 0° 4° 8° 10° Tsuppression for first 18 17 16 15 dB 18 17 16 15 dB 17 17 16 15 dBsidelobe above main beam

Cross polar ratio (typical)Main direction 0° 15 dB 15 dB 15 dBSector ±60° >8 dB >7.5 dB >7 dB

11281-B936.3948/a

Mounting Equipment:

Model Description







0 0

3

0 6

90

0 2 1

0 5

1

180 0

1 2

0 4 2

270

0 0 3

0 3 3

3

10

20

30

0 0

3

0 6

90

0 2 1

0 5

1

180

0 1

2

0 4 2

0 0 3

0 3 3

3

10

20

30


12.7 inches(323 mm)




2.8 inches(71 mm)

2.625 inches ± 0.125(68 mm ± 4)

3.9 inches(98 mm)

742 352V01

88°

1710–2180 MHz1710–2180 MHz

XX-POL



Profile PF8









+45° and -45° polarization 65° (half-power) 65° (half-power) 63° (half-power)vertical beamwidth

Horizontal pattern



7 -16 D IN 7-16 DIN

1710-2170-45°

1710-2170+45°

Mounting Equipment:

Model Description



11288-B936.3969/a



Impedance 50 ohms

VSWR < 1.4:1






Isolation >30 dB


Squint ±3°








6.1 inches(155 mm)

9.4 inches(239 mm)

2.7 inches(69 mm)

6.1 inches(155 mm)

2.5 inches(64 mm)

8.2 inches(209 mm)

68°

1710–2170 MH

X - POL

0° Electrical Down

742 210V01

Profile PF5





11268-A936.3862/a



VSWR <1.4:1

Impedance 50 ohms




Isolation >30 dB

Maximum input power 150 watts (at 50°C) per inputTracking 0.5 dB

Squint ±1.5°









Gain 11.5 dBi 12 dBi 12 dBi



Electrical downtilt 3° 2° 0°



7-16 DIN 7 -16 D IN

1710-2170-45°

1710-2170+45°

Mounting Equipment:

Model Description


732 327 Tilt Kit for use with the above(optional) mounting kits,



13.5 inches(342 mm)

16.8 inches(426 mm)

15.6 inches(396 mm)

2.7 inches(69 mm)

6.1 inches(155 mm)

2.5 inches(64 mm)

65°

1710–2170 MHz

X - POL


739 489V01

Profile PF5

Horizontal pattern




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30






Impedance 50 ohms

VSWR < 1.4:1





Isolation >30 dBCross polar ratioMain direction 0° 25 dB (typical)Sector ±60° >10 dB


Squint ±1.5°









Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)(180° ± 30°) >25 dB (total power) >25 dB (total power) >25 dB (total power)



Sidelobe suppression for >14 dB >16 dB >14 dBfirst sidelobe above horizon

11287-A936.3968/a



0 0

3

0 6

90

0 2 1

0 5

1

180 0

1 2

0 4 2

270

0 0 3

0 3

3

3

10

20

30

0 0

3

0 6

90

0 2 1

0 5

1

180 0

1 2

0 4 2

270

0 0 3

0 3 3

3

10

20

30

1710-2170-45°

7-16

1710-2170+45°

7-16

6.1 inches(155 mm)

32.2 inches(819 mm)

28.9 inches(735 mm)

2.7 inches(69 mm)

31.1 inches(789 mm)

2.5 inches(64 mm)

Mounting Equipment:

Model Description

734 365 Mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast.





65°

1710–2170 MH

X - POL

0° Electrical Down

742 196V01

Profile PF5






VSWR <1.4:1

Impedance 50 ohms




Isolation >30 dB


Squint ±1.5°














First null-fill 25 dB (typical) 25 dB (typical) 25 dB (typical)below main beam


11269-A936.3818/a



2.7 inches(69 mm)


2.5 inches(64 mm)

–45 +45

6.1 inches(155 mm)

Mounting Equipment:

Model Description





65°

1710–2200 MHz

X - POL


800 10425V01

Profile PF5



0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1710–2200–45

1710–2200+45

7-16 7-16






VSWR <1.4:1

Impedance 50 ohms







Squint ±1.5°
















Sector ±60° >10 dB >10 dB >10 dB




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

7-16 DIN 7 -16 DIN

1710/2200-45°

1710/2200+45°

11303-A936.3983/a

Mounting Equipment:

Model Description







2.7 inches(69 mm)


2.5 inches(64 mm)

–45 +45

6.1 inches(155 mm)

65°

1710–2200 MH

X - POL

2° Electrical Down

800 10426V0

Profile PF5






VSWR <1.3:1

Impedance 50 ohms







Squint ±1.5°

















0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30



11304-A936.4036/a

7 -16 DIN 7-16 DIN

1710/2200-45°

1710/2200+45°



2.7 inches(69 mm)


2.5 inches(64 mm)

–45 +45

6.1 inches(155 mm)

Mounting Equipment:

Model Description





65°

1710–2200 MHz

X - POL


800 10428V01

Profile PF5





11285-A936.3937/a



Impedance 50 ohms

VSWR < 1.5:1






Isolation >30 dB

Tracking 0.5 dB

Aquint ±1°


Dimensions 85 x 6.1 x 2.7 inches (2160 x 155 x 69 mm)








Front-to-back ratio >30 dB (co-polar) >30 dB (co-polar) >30 dB (co-polar)(180° ± 30°) >28 dB (total power) >28 dB (total power) >27 dB (total power)





Mounting Equipment:

Model Description




1710-2170-45°

1710-2170+45°

7-16 DIN 7 -16 D IN

85 inches(2160 mm)

2.7 inches(69 mm)

6.1 inches

(155 mm)

88.3 inches

(2244 mm)


2.5 inches

(64 mm)

65°

1710–2170 MH

X - POL

0° Electrical Down

742 186V01

Profile PF5







VSWR <1.5:1

Impedance 50 ohms





Maximum input power 300 watts (at 50°C) per inputSidelobe suppression forfirst sidelobe above main beam >15 dB0° –30° sector above horizon >15 dB

First null-fill below main beam < 20 dB


Squint ±1.0°








11270-A936.3815/a

Mounting Equipment:

Model Description



Reference the Mechanical Accessories section.6.1 inches

(155 mm)


3.5 inches

(89 mm)

88.4 inches

(2246 mm)

2.625 inches ± 0.125

(68 mm ± 4)





+45° and -45° polarization 4.2° (half-power) 4° (half-power) 3.7° (half-power) 3.5° (half-power)vertical beamwidth


Cross polar ratioMain direction 0° 25 dB 23 dB 23 dB 23 dBSector ±60° >12 dB >12 dB >10 dB >10 dB

Horizontal pattern



0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

65°

1710–2200 MHz

X - POL


800 10439V01

Profile PF9





Mounting Equipment:

Model Description





VSWR <1.4:1

Impedance 50 ohms



Front-to-back ratio >23 dB (co-polar)(180° ±30°) >23 dB (total power)


Isolation >30 dB


Tracking 0.5 dB

Squint ±3°












Sidelobe suppressionvertical sector ±45° >20 dB >20 dB >20 dB


11282-A936.3938/a

13.5 inches(342 mm)

16.8 inches(426 mm)

2.7 inches(69 mm)

2.5 inches(64 mm)

6.1 inches(155 mm)

15.6 inches

(396 mm)

88°

1710–2170 MH

X - POL

0° Electrical Down

741 984V0

Profile PF5



0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1710–2170–45

1710–2170+45

7-16 7-16




1710–2180 MHz Panel AntennaV- polarization

800 10368

13°

1710–2180 MHz

V - POL

Mounting Equipment:

Model Description

2 X 738 546 Mounting Kit for 2 to 4.6 inch(50 to 115 mm) OD mast.


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

H-planeHorizontal pattern

V- polarization

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

E-planeVertical patternV- polarization


Average gain 18.1 dBi 18.4 dBi 18.7 dBi

H-plane beamwidth 13.3° (half-power) 12.8° (half-power) 12° (half-power)

Sidelobe suppression >18 dB >18 dB >17 dBhorizontal pattern

E-plane beamwidth 37° (half-power) 36° (half-power) 36° (half-power)Sidelobe suppression for >18 dB >18 dB >18 dBfirst sidelobe above main beamvertical pattern



VSWR <1.5:1

Impedance 50 ohms


Polarization Vertical

Front-to-back ratio >30 dB (co-polar)(180° ± 30°)


Connector 7-16 DIN female




(340 N) 6 (25 N) / (400 N)



10908-B936.2945/b

11.8 inches(299 mm)

3 inches

(77 mm)

29.3 inches

(743 mm)




11097-A

42 inches(1067 mm)



2.7 inches(69 mm)

2.5 inches(64 mm )

6.1 inches(155 mm)

48°

2496–2690 MH

X - POL


0°–10°

Remote Control Op

840 10046

Profile PF5

Mounting Equipment:

Model Description



850 10013 Tilt Kitfor use with the 2 x 738 546 mounting kit0–15 degrees downtilt angle.


Specifications:


Gain 18 dBi

Impedance 50 ohms

VSWR < 1.43:1



Front-to-back ratio >27 dB typical

Maximum input power 300 watts (at 50°C)+45° and -45° polarization 48 degrees at midband (half power)horizontal beamwidth

+45° and -45° polarization 7 degrees at midband (half power)vertical beamwidth

Electrical downtilt 0–10 degreescontinously adjustable


Sidelobe suppression for 0° 4° 8° 10°first sidelobe above horizon 15 15 15 15 dB (typical)

Cross polar ratio 25 dB typical bore sight15 dB typical ±45° sector edges

Null fill > -1 dBi to 12° below horizon (typical)

Isolation >30 dB



Equivalent flat plate area 2.5 ft2 (0.23 m2)




Mounting Fixed and tilt-mount options areavailable for 2 to 5.7 inch(50 to 145 mm) OD masts.




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30



Designed for MIMO applications,

a single adjustment mechanism

controls the left and right antennassimultaneously through the

0°–10° downtilt range.

11210-C

Specifications:


Gain 2 x 16 dBi

Impedance 50 ohms

VSWR < 1.5:1



Front-to-back ratio >23 dB typical


+45° and -45° polarization 87 degrees at midband (half power)horizontal beamwidth

+45° and -45° polarization 7 degrees at midband (half power)vertical beamwidth

Electrical downtilt 0–10 degreescontinously adjustable


Sidelobe suppression for 0° 4° 8° 10°first sidelobe above horizon 15 15 15 15 dB (typical)

Cross polar ratio 15 dB typical bore sight10 dB typical ±60° sector edges

Null fill > -1 dBi to 12° below horizon (typical)

Isolation >30 dB




(500 N) / (90 N) / (520 N)





87°

2496–2690 MHz

XX - POL


0°–10°


840 10054B

Mounting Equipment:

Model Description


850 10013 Tilt Kit for use with the2 x 738 546 mounting kit0–15 degrees downtilt angle.


42 inches(1067 mm)

45.3 inches

(1151 mm)

2.8 inches(71 mm)

44.1 inches

(1120 mm)

2.625 inches ± 0.125

(68 mm ± 4)

12.7 inches(323 mm)





0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30





0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30





0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Adjusts left and right

simultaneously.

2496–2690 Left

–45 –45

+45

Right 2496–2690

+45RCU

Layout of interface

Profile PF8



1710–2170 MHz Trisector AntennaX Polarization



VSWR <1.5:1

Impedance 50 ohms




Connector 3 x 2 x 7/16 DIN female


Height 48.9 inches (1241 mm)

Radome diameter 9.1 inches (230 mm)



Natural frequency 45–47 Hz

Damping ratio 0.032



Gain (dBi) 15.4 15.2 15 14.8 15.5 15.4 15.3 14.9 15.7 15.6 15.4 14.9Tilt 0° 4° 8° 12° 0° 4° 8° 12° 0° 4° 8° 12°




Sidelobe suppression for 0° 4° 8° 12° 0° 4° 8° 12° 0° 4° 8° 12°first sidelobe above horizon 16 16 15 15 dB 18 17 17 16 dB 18 18 16 16dB


Sector ±60° >10 dB (typical) >10 dB (typical) >10 dB (typical)Isolation intrasystem >30 dB >30 dB >30 dB

intersystem >40 dB >40 dB >40 dB

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

Horizontal pattern




10945-C936.2830/a

65°

1710–2170 MH

X - POL


0°–12°

Remote Control Op

800 10375

9.1 inches

(230 mm)

31.6 inches(803 mm)

17.2 inches(438 mm)

11 inches

(280 mm)

Service Area(cover removed)

Mounting Information

Description

Flange connection 12 x 12M at a graduated diameter of208 mm, 0°–360° continuously adjustable.



1710–2170 MHz Trisector AntennaX Polarization



VSWR <1.5:1

Impedance 50 ohms



Front-to-back ratio >30 dB (co-polar)(180° ± 30°) >25 dB (total power)

Connector 3 x 2 x 7-16 DIN female

Maximum input power 300 watts (at 50°C)per input






Natural frequency 19–21 Hz

Damping ratio 0.032



Average gain (dBi) 17.2 17.5 17.2 17.6 17.8 17.6 17.8 17.9 17.4Tilt 0° 5° 10° 0° 5° 10° 0° 5° 10°


+45° and -45° polarization 7° (half-power) 6.7° (half-power) 6.4 ° (half-power)vertical beamwidth


Sidelobe suppression for 0° 5° 10° T 0° 5° 10° T 0° 5° 10° Tfirst sidelobe above horizon 17 15 15 dB 17 17 15 dB 17 17 15 dB

Cross polar ratioMain direction 0° 25 dB (typical) 20 dB (typical) 20 dB (typical)Sector ±60° >10 dB (typical) >10 dB (typical) >10 dB (typical)

Isolation intrasystem >30 dB >30 dB >30 dBintersystem >45 dB >42 dB >42 dB

10895-C936.2761/a

800 10360

65°

1710–2170 MHz

X - POL


0°–10°


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1710–1880 MHz




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1850–1990 MHz




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1920–2170 MHz




Service Area(cover removed)

9.1 inches(230 mm)


17.2 inches(438 mm)

11 inches(280 mm)

Mounting Information

Description

Flange connection 12 x 12M at a graduated diameter of 208 mm, 0°–360° continuously adjustable.



Specifications:

Outer diameter 180 mm

Cable diameter (6x) 15–42 mm

Cable diameter (3x) 3.5–10.5 mm

Frame material Stainless steel

Sealing material Halogen-free cross linkable compound onethylene-propylene rubber (EPDM)

Fasteners Stainless steel

Accessories Mounting lubricant

Required assembly tools 6 mm socket wrenchWeight 4 lb (1.8 kg)


10826-C936.2670/a

110

51

255

25

30

38

9 1

Ø 1

7 0

Ø 1

8 0

Demanded dimensions of the installation interface: 183

172

1 2

+2+0

+1+0

Flexible Sealing Frame for Trisector Antenna 850 10010



Flexible Sealing Frame for Trisector Antenna850 10010

Mounting instruction:

1) Tighten all screws alternating and evenly. A crosswise tightening of the outerscrews will cause a more homogeneous distribution of sealing pressure.After tightening, check extraction force of all cables.

Torque socket screw M8 1)

Max. 20 Nm (12x)

Insert the plugsat unused holes

Pole withinstallation interface

Gap 0.1 – max. 0.5 mmbetween cable and sealing

Feeder cable

.4.3.2.1

.8.7.6.5



A N T E N N A S

Important additions to Kathrein’s product line are these fixed tilt

antennas that provide operation in the 700 MHz wireless band.

All models will provide broadband coverage of the 800 MHz cellular

band; additional models will also offer broadband service for the

PCS/AWS band as well.

Rugged and reliable, these devices are being offered in a variety of

configurations that will permit integration of new services into legacy

sites with minimal impact. Both spatial and polarization diversity

schemes can be employed that will satisfy both existing CDMA or

GSM-based services, or soon to be deployed LTE systems that employ

2x or 4x diversity methods.

Kathrein offers models with fixed downtilts in two degree increments,

up to 14° in lowband and 8° highband in some models, and in

both vertically- and cross-polarized versions. Dual band models are

equipped with internal combiners to achieve feedline usage in both

high and low bands.

7 0 0 M H z F i x e d T i l t

700 MHz Fixed Tilt Panel Antennas

162




11167-FRO/d

Mounting Equipment:

Description Weight

2-point mounting kit for 2 to 4.5 inch 4 lb (1.8 kg)(50 to 115 mm) OD mast.

2-point tilt kit 7.4 lb (3.7 kg)0–15 degrees downtilt angle.

See illustrations and instructions on pages 181–182

Specifications:


Impedance 50 ohms

VSWR / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)

PIM (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc

Polarized +45° and -45°

Front-to-back ratio >25 dB (worst case, within ± 20 degree cone)

Power handling 500 watts (at 50°C)Electrical downtilt range 0–14 degrees (2° increments)

Isolation >30 dB

Normalized radiation patternenvelope at 80° azimuth -15 dBenvelope at 90° azimuth -23 dBenvelope at 100° azimuth -25 dB

Crosspolar discriminationazimuth < 30° >20 dB30°<azimuth<60° >10 dB

Primary test frequencies 752 MHz, 782 MHz

Secondary test frequencies 704 MHz, 734 MHz835 MHz, 880 MHz

Lightning protection Chassis ground

Connector 2 x 7-16 DIN female(sealable long neck) (backmounted)

Dimensions L x W x D 51.2 x 14.7 x 4.1 inches (1301 x 374 x 103 mm)



(520 N) / (215 N) / (632 N)

Radome UV-resistant fiberglass

Wind survival 150 mph (240 kph)

Order Information:

Model Description

840 21600-00 Antenna with 0° electrical downtilt








10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

Vertical pattern±45° - polarization


47°

698–894 MHz

4 ft X - POL

0° to 14° Electrical Do

2° increments

840 21600 ser


Gain tilt 0°–6° 12.8 dBd 13.6 dBdtilt 8°–14° 12.3 dBd 13.1 dBd

Horizontal beamwidth 49° 45°@ 3 dB points

Vertical beamwidth 15.5° 14°@ 3 dB points

4.1 inches(103 mm)

39.4 inches

(1000 mm)

14.7 inches

(374 mm)

51.2 inches

(1301 mm)

3.9 inches(100 mm)





Specifications:


Impedance 50 ohms






Isolation >30 dB










(520 N) / (215 N) / (632 N)



11138-B

Mounting Equipment:

Description Weight




Order Information:

Model Description









60°

698–894 MHz

4 ft X - POL

to 14° Electrical Downtilt

2° increments

840 21210 series


Gain tilt 0°–6° 12 dBd 12.8 dBdtilt 8°–14° 11.5 dBd 12.3 dBd



4.1 inches(103 mm)

39.4 inches

(1000 mm)

14.7 inches

(374 mm)

51.2 inches

(1301 mm)

3.9 inches(100 mm)



0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30





11139-FRO/g

Mounting Equipment:

Description Weight




Specifications:


Impedance 50 ohms






Isolation >30 dB










(575 N) / (209 N) / (610 N)



Order Information:

Model Description









10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

Vertical pattern

±45° - polarization






5.9 inches(151 mm)


54.3 inches

(1378 mm)

51.7 inches

(1314 mm)

11.8 inches

(300 mm)

80°

698–894 MHz

4 ft X - POL


2° increments

840 21220 serMounting Clamps Included




Specifications:


Impedance 50 ohms






Isolation >30 dB







Dimensions L x W x D 78 x 14.7 x 4.1 inches (1980 x 374 x 103 mm)



(790 N) / (350 N) / (1038 N)



11168-FRO/e

Mounting Equipment:

Description Weight


3-point tilt kit 13.3 lb (6 kg)0–10 degrees downtilt angle.


Order Information:

Model Description







10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

0

10

20

30

40

50

60

70

80

90

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%



47°

698–894 MHz

6 ft X - POL

to 10° Electrical Downtilt

2° increments

840 21630 series




Vertical beamwidth 10.7° 9.5°@ 3 dB points

4.1 inches(103 mm)

30.3 inches(770 mm)

14.7 inches

(374 mm)

78 inches(1980 mm)

3.9 inches(100 mm)

30.3 inches(770 mm)





11141-FRO/d

Mounting Equipment:

Description Weight




Specifications:


Impedance 50 ohms






Isolation >30 dB










(790 N) / (350 N) / (1038 N)



Order Information:

Model Description







60°

698–894 MHz

6 ft X - POL


2° increments

840 21240 ser




Vertical beamwidth 10.7° 9.5°

@ 3 dB points

4.1 inches(103 mm)

30.3 inches(770 mm)

14.7 inches

(374 mm)

78 inches(1980 mm)

3.9 inches(100 mm)

30.3 inches(770 mm)



0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30





11142-FRO/f

Mounting Equipment:

Description Weight




Specifications:


Impedance 50 ohms






Isolation >30 dB








Weight 44 lb (20 kg)


(883 N) / (315 N) / (923 N)



Order Information:

Model Description







10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

0

10

20

30

40

50

60

70

80

90

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%







80°

698–894 MHz

6 ft X - POL

° to 10° Electrical Downtilt

2° increments

840 21250 series

5.9 inches(151 mm)


75.5 inches

(1918 mm)

73 inches

(1854 mm)

11.8 inches

(300 mm)





11169-FRO/e

Specifications:


Impedance 50 ohms






Isolation >30 dB










(1053 N) / (467 N) / (1294 N)



Order Information:

Model Description






10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%



47°

698–894 MHz

8 ft X - POL


2° increments

840 21660 ser

4.1 inches(103 mm)


14.7 inches

(374 mm)

103.8 inches(2637 mm)

3.9 inches(100 mm)



Gain tilt 0°–6° 15.8 dBd 16.6 dBdtilt 8° 15.3 dBd 16.1 dBd



Mounting Equipment:

Description Weight








Specifications:


Impedance 50 ohms

VSWR1 / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)

PIM1 (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc


Front-to-back ratio >30 dB (worst case, within ± 20 Degree cone)


Isolation >30 dB






Connector 2 x 7-16 DIN female (sealable long neck) (backmounted)

Dimensions L x W x D 103.8 x 14.7 x 4.1 inches (2637 x 374 x 103 mm)Weight 38.1 lb (17.3 kg)


(1053 N) / (467 N) / (1294 N)



11144-B

Mounting Equipment:

Description Weight




Order Information:

Model Description






60°

698–894 MHz

8 ft X - POL

° to 8° Electrical Downtilt

2° increments

840 21270 series


Gain 15 dBd 15.8 dBd



4.1 inches(103 mm)


14.7 inches

(374 mm)

103.8 inches(2637 mm)

3.9 inches(100 mm)




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30





11145-FRO/e

Mounting Equipment:

Description Weight

3-point mounting kit for 2 to 4.5 inch 6 lb (2.7 kg)

(50 to 115 mm) OD mast.3-point tilt kit 13.3 lb (6 kg)



Specifications:


Impedance 50 ohms






Isolation >30 dB










(1285 N) / (470 N) / (1344 N)



Order Information:

Model Description






10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%




Gain tilt 0°–6° 13.8 dBd 14.6 dBdtilt 8° 13.3 dBd 14.1 dBd



5.9 inches(151 mm)

109 inches(2768 mm)

107.4 inches

(2728 mm)

104.9 inches

(2664 mm)

11.8 inches

(300 mm)

80°

698–894 MHz

8 ft X - POL


2° increments

840 21280 serMounting Clamps Included



698–894 /1710–2170 MHz Panel Antennawith Integrated Combiner XX Polarization

47° // 40°

698–894 MHz1710–2170 MHz

4 ft XX - POL

0° to 14°, 0° to 8°

Electrical Downtilt2° increments

840 21800 series

11173-FRO/e

Specifications:


Impedance 50 ohms




Front-to-back ratio >25 dB // >30 dB(worst case, within ± 20 degree cone)

Power handling 500 watts (at 50°C) // 250 watts (at 50°C)per connector

Isolation >30 dB

Normalized radiation patternenvelope at 80° azimuth -15 dB // -15 dBenvelope at 90° azimuth -23 dB // -23 dBenvelope at 100° azimuth -25 dB // -25 dB

Crosspolar discriminationazimuth < 30° >20 dB // >20 dB30°<azimuth<60° >10 dB // >10 dB

Primary test frequencies 752 MHz, 782 MHz // 1880 MHz, 1960 MHz

Secondary test frequencies 704 MHz, 734 MHz // 1750 MHz, 2150 MHz835 MHz, 880 MHz

Electrical downtilt range 0–14 degrees // 0–8 degrees(2° increments)

Lightning protection Chassis groundConnector 2 x 7-16 DIN female

(sealable long neck) (backmounted)




(520 N) / (215 N) / (632 N)





1710–2170 MHz



698–894 MHz

Mounting Equipment:

Description Weight




10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

Specifications: MHz 698–806 806–894 1710–1880 1850–1990 1920–2170

Gain tilt 0°–6° // 0°–8° 12.8 dBd 13.6 dBd 16.2 dBd 16.5 dBd 16.8 dBdtilt 8°–14° 12.3 dBd 13.1 dBd

Horizontal beamwidth 49° 45° 42° 40° 38°@ 3 dB points

Vertical beamwidth 15.5° 14° 8° 7.5° 7°@ 3 dB points

4.1 inches(103 mm)

39.4 inches

(1000 mm)

14.7 inches

(374 mm)

51.2 inches

(1301 mm)

3.9 inches(100 mm)

Order Information:

Model Description

840 21800-xx-yy Dualband antenna with electrical downtilt

HighbandTilt (-yy)

00°

02°

04°

06°

08°

LowbandTilt (-xx)

00°

02°

04°

06°

08°

10°

12°

14°




698–894 /1710–2170 MHz Panel AntennaXX Polarization with Integrated Combiner

60°

698–894 MHz1710–2170 MH

4 ft XX - POL

0° to 14°, 0° to 8

Electrical Downti2° increments

840 21410 se

Specifications:


Impedance 50 ohms






Isolation >30 dB











(520 N) / (215 N) / (632 N)



11156-FRO/e



698–894 MHz



1710–2170 MHz

Mounting Equipment:

Description Weight




10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%


Gain tilt 0°–6° // 0°–8° 12 dBd 12.8 dBd 15.2 dBd 15.5 dBd 15.8 dBdtilt 8°–14° 11.5 dBd 12.3 dBd



4.1 inches(103 mm)

39.4 inches

(1000 mm)

14.7 inches

(374 mm)

51.2 inches

(1301 mm)

3.9 inches(100 mm)

Order Information:

Model Description


HighbandTilt (-yy)

00°

02°

04°

06°

08°

LowbandTilt (-xx)

00°

02°

04°

06°

08°

10°

12°

14°





80°

698–894 MHz1710–2170 MHz

4 ft XX - POL

0° to 14°, 0° to 6°


840 21420 series

11157-FRO/g

Specifications:


Impedance 50 ohms






Isolation >30 dB











(575 N) / (209 N) / (610 N)





1710–2170 MHz



698–894 MHz

Mounting Equipment:

Description Weight




10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%





Order Information:

Model Description


HighbandTilt (-yy)

00°

02°

04°

06°

08°

LowbandTilt (-xx)

00°

02°

04°

06°

08°

10°

12°

14°

5.9 inches(151 mm)


54.3 inches

(1378 mm)

51.7 inches

(1314 mm)

11.8 inches

(300 mm)





47° // 40°

698–894 MHz1710–2170 MH

6 ft XX - POL

0° to 10°, 0° to 6


840 21830 se

Specifications:


Impedance 50 ohms






Isolation >30 dB











(790 N) / (350 N) / (1038 N)



11174-FRO/f



698–894 MHz



1710–2170 MHz

Mounting Equipment:

Description Weight




20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

0

10

20

30

40

50

60

70

80

90

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%




Vertical beamwidth 10.7° 9.5° 5.5° 5.1° 4.7°@ 3 dB points

Order Information:

Model Description


HighbandTilt (-yy)

00°

02°

04°

06°

LowbandTilt (-xx)

00°

02°

04°

06°

08°

10°

4.1 inches(103 mm)

30.3 inches(770 mm)

14.7 inches

(374 mm)

78 inches

(1980 mm)

3.9 inches(100 mm)

30.3 inches

(770 mm)





60°

698–894 MHz1710–2170 MHz

6 ft XX - POL

0° to 10°, 0° to 8°


840 21440 series

11159-FRO/f

Specifications:


Impedance 50 ohms

VSWR / Return loss < 1.35:1 / >16.64 dB(< 1.4:1 / >15.56 dB @ secondary test frequencies)





Isolation >30 dB











(790 N) / (350 N) / (1038 N)





1710–2170 MHz



698–894 MHz

Mounting Equipment:

Description Weight




10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

0

10

20

30

40

50

60

70

80

90

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%


Gain tilt 0°–6° // 0°–6° 13.5 dBd 14.3 dBd 16.2 dBd 16.5 dBd 16.8 dBdtilt 8°–10° 13 dBd 13.8 dBd



4.1 inches(103 mm)

30.3 inches(770 mm)

14.7 inches

(374 mm)

78 inches(1980 mm)

3.9 inches(100 mm)

30.3 inches(770 mm)

Order Information:

Model Description


HighbandTilt (-yy)

00°

02°

04°

06°

LowbandTilt (-xx)

00°

02°

04°

06°

08°

10°





80°

698–894 MHz1710–2170 MH

6 ft XX - POL

0° to 10°, 0° to 6


840 21450 se

Specifications:


Impedance 50 ohms






Isolation >30 dB











(883 N) / (315 N) / (923 N)



11160-FRO/g



698–894 MHz



1710–2170 MHz

Mounting Equipment:

Description Weight




10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

0

10

20

30

40

50

60

70

80

90

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%





Order Information:

Model Description


HighbandTilt (-yy)

00°

02°

04°

06°

LowbandTilt (-xx)

00°

02°

04°

06°

08°

10°

5.9 inches(151 mm)


75.5 inches

(1918 mm)

73 inches

(1854 mm)

11.8 inches

(300 mm)





47° // 40°

698–894 MHz1710–2170 MHz

8 ft XX - POL

0° to 8°, 0° to 4°


840 21860 series

11175-FRO/e

Specifications:


Impedance 50 ohms






Isolation >30 dB











(1053 N) / (467 N) / (1294 N)





1710–2170 MHz



698–894 MHz

Mounting Equipment:

Description Weight




10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

4.1 inches(103 mm)


14.7 inches

(374 mm)

103.8 inches

(2637 mm)

3.9 inches(100 mm)

40.1 inches

(1018 mm)


Gain tilt 0°–6° // 0°–4° 15.8 dBd 16.6 dBd 18.2 dBd 18.5 dBd 18.8 dBdtilt 8° 15.3 dBd 16.1 dBd


Vertical beamwidth 7.8° 6.8° 4° 3.7° 3.4°@ 3 dB points

Order Information:

Model Description


HighbandTilt (-yy)

00°

02°

04°

LowbandTilt (-xx)

00°

02°

04°

06°

08°





60°

698–894 MHz1710–2170 MH

8 ft XX - POL

0° to 8°, 0° to 4°


840 21470 se

Specifications:


Impedance 50 ohms

VSWR1 / Return loss < 1.35:1 / >16.5 dB @ primary test frequencies(< 1.43:1 / >15 dB @ secondary test frequencies)

PIM1 (2x20w) IM3 IM5 IM7-9 <-150 dBc <-160 dBc <-170 dBc




Isolation >30 dB











(1053 N) / (467 N) / (1294 N)



11162-FRO/f



698–894 MHz



1710–2170 MHz

Mounting Equipment:

Description Weight




Order Information:

Model Description


HighbandTilt (-yy)

00°

02°

04°

LowbandTilt (-xx)

00°

02°

04°

06°

08°

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%


Gain tilt 0°–6° // 0°–4° 15 dBd 15.8 dBd 17.2 dBd 17.5 dBd 17.8 dBdtilt 8° 14.5 dBd 15.3 dBd



4.1 inches(103 mm)


14.7 inches

(374 mm)

103.8 inches

(2637 mm)

3.9 inches(100 mm)

40.1 inches

(1018 mm)





80°

698–894 MHz1710–2170 MHz

8 ft XX - POL

0° to 8°, 0° to 4°


840 21480 series

11163-FRO/f

Specifications:


Impedance 50 ohms






Isolation >30 dB











(1285 N) / (470 N) / (1344 N)





1710–2170 MHz



698–894 MHz

Mounting Equipment:

Description Weight




10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%

10

20

30

40

50

60

70

80

90

0

3 0

6 0

90

1 2 0

1 5 0 180 2

1 0

2 4 0

270

3 0 0

3 3 0

3020163 61020

3

6

10

20

BdBd

dB

%


Gain tilt 0°–6° // 0°–4° 13.8 dBd 14.6 dBd 16.2 dBd 16.5 dBd 16.8 dBdtilt 8° 13.3 dBd 14.1 dBd



Order Information:

Model Description


HighbandTilt (-yy)

00°

02°

04°

LowbandTilt (-xx)

00°

02°

04°

06°

08°

5.9 inches(151 mm)

109 inches(2768 mm)

107.4 inches

(2728 mm)

104.9 inches

(2664 mm)

11.8 inches

(300 mm)




3-point Mounting Hardwarefor 6 ft and 8 ft Antennas

2-point Mounting Hardwarefor 4 ft Antennas

Mounting Bracketsfor use with 2-point mount 21000 series antennas

Mast dia. 2–4.5 inches (50–115 mm)

Weight: 4 lb (1.8 kg)

Mounting Bracketsfor use with 3-point mount 21000 series antennas


Weight: 6 lb (2.7 kg)

Mechanical Tilt Bracketsfor use with 2-point mount 21000 series antennas

Weight: 7.4 lb (3.7 kg)

64 mmM8

Mechanical Tilt Bracketsfor use with 3-point mount 21000 series antennas

Weight: 13.3 lb (6 kg)

64 mmM8

21000 series Mounting Hardwa



21000 seriesMounting Information

Note: Antenna must be

mounted with the

drain holes at thebottom.

47° and 60° Panel Antennas 80° Panel Antennas

Dout

Dout Dout

742 033* 742 034*Mast dia. 4.5" (114.3 mm) 5.5" (139.7 mm)

22.5 inches 23.25 inches(572 mm) (591 mm)

2-Point3-Sector Mounting

Drain Location

* 3-sector mounting systems are 2-point mounting arrangements. For antennas with 3 mounting points, consultation with structuraldesigners/engineers is strongly recommended in accordance with local regulations. See page 358 for sector mount kit specifications

Dout Dout

742 033* 742 034*Mast dia. 4.5" (114.3 mm) 5.5" (139.7 mm)

25.5 inches 26.5 inches(648 mm) (673.1 mm)

2-Point3-Sector Mounting

Dout



Remote Electrical Downtilt


860 10147 Remote control unit 192

860 10148 Remote control unit 192

860 10006 Central control unit 193

860 10026 Central control unit 193

860 10046 Portable control adapter 195

860 10002 RET remote control signal splitter 196

860 10030 Lightning protection device 197

782 10253 Smart bias tee 198










782 10577 Bias Tee 203

782 10578 Bias Tee 203

782 10429 Bias Tee 205

793 304 Bias tee 206

793 301 DC stop 207

782 10850 DC stop 208

840 104nn Series Remote Control Cables -Black (150 m and 200 m) 209

GC-1 Grounding clamp 211

850 10005 Kathrein installation tool 212

183



C O M P O N E N T S

R e m o t e E l e c t r i c a l T i l t

In contrast to legacy wireless systems, using fixed cell sizes, advancednetworks will be dynamically re-configurable to accommodate the

demands of subscriber loading, time of day, seasonal adjustments

and system expansion. In any newly designed or upgraded wireless

system, coverage adjustments may be made by varying vertical

beam tilt to lengthen or shorten sector range. Kathrein’s advanced

antennas have continuously adjustable downtilt by optional tilt control

units under local or remote control. Tilt in each band covered by the

antenna is independently adjustable.

Site optimization can be accomplished when construction is complete

and adjusted easily and quickly in the future as operating conditions

evolve. Adjustment is possible by on-site personnel, with no need for

tower climbing. Via Ethernet link, control from the network control

center may be accomplished, by network operators or dynamically

by the network control system. Coverage adjustments may be

made anytime, without the need to power down a site. This may

be especially valuable where site access may be difficult, such as

installations on high voltage transmission towers.

Kathrein offers a complete solution for Remote Electrical Downtilt, with

all the components to accomplish this vital improvement to capacity

and reliability: antennas, motor controls, control cable splitters, control

units, and accessories. In addition, some Kathrein antennas haveintegrated remote control actuators.

Kathrein’s Remote Electrical Tilt (RET) system advantages:

✦ Limited site access and/or time restrictions become irrelevant

✦ No special platforms or other means of access to the antenna

are required

✦ Adjustments can be made and the appropriate measurements

performed quickly and economically

✦ Network alterations can be carried out despite adverse

weather conditions

✦ Cells remain fully operational while changes are being made

✦ Permits site optimization at stealth or difficult-to-access sites

184



Kathrein is a member of the Antenna Interface

Standards Group that has the objective of

introducing open control standards for base station

antennas with remotely adjustable tilt.

RET Components:

RCU (Remote Control Unit)

✦ CCU (Central Control Unit)

✦ DC Power and Signal Splitter

✦ Control Cable

✦ Lightning Protection Device

✦ Grounding Kit

Optional:

✦ Dual Band Combiners – See “TMA’s, Filters,

Electrical Accessories” section for more detail

✦ Smart Bias Tee

✦ DTMA (Double Tower Mounted Amplif ier)

See “TMA’s, Filters, Electrical Accessories”

section for more detail

Remote Control Un

Portable Control Unit

Signal Splitter

Lightning Protection

Device

Central Control Unit

Remote ControlCables

Smart Bias Tee

Grounding Kit

Remote Electric Tilt



Typical RET Site Configurations

Three options are offered for communication between the CCU and RCU’s:

✦ Individual control cables (with splitters and/or daisy chain feature on RCU’s)

✦ Using Smart Bias Tee’s to multiplex control signals onto the feeder lines

✦ Using a combination of Bias Tee and TMA’s




RET System Control:

Central Control Unit (CCU)

The major component for controlling the

RCU’s is the Central Control Unit (CCU),

installed at the BTS.

The CCU can be accessed from the network

control center via the Ethernet input and/or directly through a personal computer

via the RS 232 input or Ethernet input. No special software is required for standard

operation. AC/DC and DC-only models are available.

The CCU appears as an addressable IP device to the controlling computer or network

and is accessed via standard Web browser (e.g. Internet Explorer). IP addresses are user

programmable; access is password protected.

The display which appears contains all the required control functions for normal

service and installation. In addition to permitting the configuration and control of

the connected RCU’s and TMA’s, the CCU program also displays the device status,

command history list and various types of system errors. All AISG alarms can be read

via the alarm interface.

The software and firmware associated with both the CCU’s and RCU’s are continually

evolving and may be updated easily using the update pages available in the browser

application. Upgrade software may be obtained on request; registered users of

Kathrein-Scala’s on-line data library may download updates from the library.

The CCU also provides 8 user-programmable open-collector alarm outputs for interface

with the BTS.

For more detail, please see the RET Software Manual, or the RET Hardware Manual,

available on request.

Portable Control Adapter (PCA)

The PCA is a portable controller for Kathrein’s Remote Electrical Tilt system (RET). It is

a simple device for operating remote control unit’s (RCU’s) attached to Kathrein base

station antennas. This product is designed for use by installers or maintenance staff

with temporary site access. A standard Central Control Unit (CCU) is not required.

Control from the network operations center is not available using the PCA.

The PCA consists of a small control box and Windows- based software installed on a

laptop. The control box transforms the USB inter-face into an AISG-compatible interface

(RS 485 + DC voltage). Together with the supplied Windows-based software, all

functions of the RCU can be controlled via a laptop or PC.

Up to 27 RCU’s can be controlled using a single PCA. A site may be upgraded for

remote control via the network control center by replacing the PCA with a standard

CCU.



http://slidepdf.com/reader/full/kahrein-katalogas 204/36588 10922-D

850 10005

Installation Tool

Use of improper tools

may damage the

interfaces. Kathreinstrongly recommends

using the 850-10005Installation Tool with a

standard torque wrench

to tighten the nuts of thefeeder line connectors.

Sealing of cap nutson correctly installed

connectors for additional

weather protection isnot required. It is not

recommended by theconnector manufacturers.

Note


Feeder Line Installation for Panel Antennas with

Four Connectors on Two Levels

eeder Line Installation

Kathrein’s 850 10005 installation tool is suitable for either 27mm or 32 mm 7-16 DIN connectors.

Tighten the nut within a torque range of 18.5–24.4 lb-ftdepending on the connector manufacturer’s specifications.

Two tools are included (27 mm and 32 mm).

Fits a standard inch drive torque wrench.

1/2" square drive

Step 2

Step 1

There are four interfaces forfeeding the antenna located atthe bottom.

To make the installation of thefeeder lines and the connectorseasier, the interfaces arearranged on two levels.

The feeder line installationsequence is: 1, 2, 3, 4.

Put the connector carefully inplace and hand-screw the nut on.

Use a torque wrench to finish theinstallation (see the 850-10005Installation Tool).

After the feeder lines have beeninstalled the remote control units(RCU) can be installed.

See the instructions "Attachingthe RCU" for details.



Kathrein’s 850 10005 installation tool is suitable for either 27mm or 32 mm 7-16 DIN connectors.

Tighten the nut within a torque range of 18.5–24.4 lb-ftdepending on the connector manufacturer’s specifications.

Two tools are included (27 mm and 32 mm).

Fits a standard inch drive torque wrench.

1/2" square drive

Use of improper toolsmay damage the

interfaces. Kathrein

strongly recommendsusing the 850 10005

Installation Tool with astandard torque wrench

to tighten the nuts of the

feeder line connectors.

Connector Arrangement

There are six RF connections and three RETinterfaces located at the bottom of the antenna.

Do not remove the RCUconnection covers until the

feeder line installation iscomplete.

The downtilt must be set

to 0° before the RCU isinstalled (see the instructions

“Attaching the RCU” for

details).

Not following these

instructions may damage the

downtilt spindle.

Step 2

After the feeder lines have beeninstalled the remote control units

(RCU) can be installed.The RCU installation sequenceis: 1, 2, 3.

See the instructions "Attachingthe RCU" for details.

Sealing of cap nutson correctly installed

connectors for additional

weather protection isnot required. It is not

recommended by theconnector manufacturers.

Note


850 10005Installation Too

Feeder Line Installation forTriple-band Antennas

Feeder Line Installation

Step 1

The feeder line installationsequence is: 4, 5, 6, 7, 8, 9.

Put the connector carefully inplace and hand-screw the nut on.

Use a torque wrench to finish theinstallation (see the 850-10005Installation Tool).

Repeat the operations shown in

figures A and B for each feederline.



➋

➌

➊

➎

➍

Threaded attachment fittingfor the downtilt adjustmentcap and the RCU.

Locking ring.

Downtilt adjustment spindlewith integrated downtiltdegree scale.

Antenna tilt control housing.

Gear wheel for the RCU.

➋

➌

➊

➎

➍

To set the downtilt angleexactly you must lookhorizontally at the scale.The lower edge of the gearwheel must be used foralignment purposes.

Step 2

Clean the thread surface.

Apply the mounting-paste evenlyonto the full circumference of thethread as illustrated in the figure.

Step 3Push the attachment nut of theRCU down towards the RCUhousing.

Place the RCU carefully overthe adjustment spindle➌. Besure the flat side of the spindleis aligned with the flat side of theantenna tilt control housing➍.

Carefully push the RCU onto theantenna until it is firmly seated.

Step 4

Hand tighten the RCUattachment nut (41 mm).

Torque setting: 11–13 ft-lbf

Connect the RCU controlcable immediately afterattachment of the RCU. Thetorque setting for the controlcable connector must be 0.4–0.7 ft-lbf (‘hand-tightened’).

Step 1

Remove the protective downtiltadjustment cap completely fromthe antenna.

Remove the black locking ring ➋

by pulling it downward.

Check the phase shifter for properfunction by turning the gear wheel

➎. The phase shifter will gosmoothly between minimum andmaximum tilt when functioningproperly.

Reset the downtilt to 0 degrees.

Avoid ingestion of mounting-paste

or contact with eyes. In case ofcontact with eyes rinse thoroughlywith plenty of water and seek medical advice. Avoid long-termcontact with skin. In case ofcontact with skin wash off withsoap and water.

For further information please read the‘Safety data-sheet (91/155 EEC), Anti-Seize‘High-Tech’ Assembly Paste differentpacking sizes’ by company WEICONGmbH & Co. KG, Königsberger Str. 225,D-48157 Münster,http://www.weicon.de

The RCU must be kept

in vertical alignment

with the antenna duringinstallation or the

downtilt adjustmentspindle➌ may be

damaged.

In cases where amechanical downtilt is

installed do not set the

mechanical tilt more than14 degrees or the unit

may be damaged.

Remote Electric TiltAttaching the RCU

➋

➎



Remote Electric Tilt Control Cable Installation

Lightning Protection Device Remote ControlSignal Spitter

Step 1

Connect a control cable to thedaisy chain input ➊ on the RCU.

If the daisy chain output is notused, do not remove the daisy

chain output protection plug.

➋➊Daisy chain in Daisy chain out

Bottom of RCU

Step 2

To use the daisy chain option.

Remove the daisy chain outputprotection plug.

Connect a control cable to thedaisy chain output➋ on theRCU.

Connect the other end of thecontrol cable to the daisy chaininput➊ on the next RCU.

Do not remove the daisy chaintermination plug from the lastRCU device.

Dress cables using blackUV-resistant cable ties ➍.

When installing or

removing cables, turnONLY the threaded collar

indicated, not the body of

the connector. Rotatingthe connector body can

result in permanentdamage to the connector

and the device beinginstalled. Note that the

connectors have keywayswhich must be carefully

aligned before insertion.

Insert the connector fullyuntil well seated before

tightening.

Turn this collar

Turn thiscollar

➍

Hand tighten connectors(4 to 6 in-lb).

Avoid tightening

connectors with

wrenches or pliers.

Over tighteningconnectors may

permanently damage the

RCU.

Termination Plug

Keyway

Key

Smart Bias Tee

Dual Tower Mount Amplifier




Remote Control Unit

860 10147, 860 10148

11324-A936.4061/a

Kathrein’s 860 10147 and 860 10148 Remote Control Units (RCU) allow operators to control theelectrical tilt of compatible antennas without direct access to the antenna.

• Allow control of the antenna either locally through a laptop computer, on site desktop computer,the optional central control unit; remotely via an ethernet network or over the internet.

• May be retrofitted to compatible antennas without dismantling or removing the antenna.

• Suitable for daisy chain and splitter solutions.

• Suitable for outdoor use.

Specifications:


Logical interface ex factory1) AISG 1.1 860 101473GPP/AISG 2.0 860 10148

Input voltage range 10–30 V (pin 1 and pin 6)


Connectors 2) 2 x 8 pin connector according to IEC 60130-9conforming with AISGDaisy chain in: male; Daisy chain out: female

Hardware interfaces RS485A/B (pin 5, pin 3 )power supply (pin 1, pin 6); DC return (pin 7)conforming with AISG / 3GPP

Adjustment time (full range) 40 seconds (typical, depending on antennatype)


Temperature range -40°C to +60°C

Protection class IP 24

Lightning protection AISG interface (each pin)2.5 kA (10/350 μs) 8 kA (8/20 μs)

Housing material Profile: Aluminum, coatedCover: Aluminum

Weight 1.16 lb (525 g)

Dimensions 7 x 2.4 x 2 inches (178 x 60 x 50 mm)

Shipping dimensions 9.6 x 4 x 3.7 inches (245 x 102 x 93 mm)

Standards EN 60950-1 (Safety)EN 55022 (Emission)EN 55024 (Immunity)ETS 300019-1-4 (Environmental)UL 60950-1; 1st edition

Certifications CE, FCC 15.107 Class B

Order Information:

Model Description

860 10147 Remote control unit (AISG 1.1 start-up)

860 10148 Remote control unit (3GPP/AISG 2.0 start-up)

2 inches(50 mm)

2.4 inches(60 mm)

7 inches(178 mm)

1) The protocol of the logical interface can be switched from AISG 1.1 to 3GPP/ AISG 2.0 and vice versa with a vendor specific command. Start-up operationof the RCU 860 10147 is only possible in a RET system supporting AISG 1.1and start-up operation of the RCU 860 10148 is only possible in a RET systemsupporting 3GPP/AISG 2.0.

The protocol can also be changed as follows: AISG 1.1 to 3 GPP:Enter “3GPP”into the additional data filed “Installer’s ID” and perform a layer 7 reset or a powerreset. 3GPP to AISG 1.1:Enter “AISG1” into the additional data field “Installer’sID” and perform a layer 2 reset or a power reset. After switching the protocol anyother information can be entered into the “Installer’s ID” field.

Please note: If the Primary of the RETsystem does not support the standard ofthe ‘logical interface ex factory’, the RCU must be switched to the appropriatestandard of the Primary before installation. Please contact Kathrein for furtherinformation.

2) The tightening torque for attaching the connector must be 0.4–0.7 ft-lbf (handtightened).



KATHREIN 860 10147, 860 10148

Tested To Comply

With FCC Standards

Daisy chain in(male)

Daisy chain(female

Bottom of RCU

NE W



Specifications:

Connectors 3 x 8 pin connectoraccording to IEC 60130-9, female,conforms to AISG

tightening torque for 0.5–1 Nm (0.36–0.73 lb/ft)attaching connectors hand tighten only

Power supply from BTS860 10006 DC: -48 V /max. 1.7 A

AC: 100 V–240 V / 50–60 Hzmax. 1.6 A

860 10026 DC: -48 V /max. 1.7 A

Power supply to RCU 3 x +29 V / max. 1.7 A (in total)3 x +13 V / max. 3.8 A (in total)

Total output power 50 W max.

Interface to RCU and TMA RS 485 / power supply

Protocol to RCU and TMA HDLC hex-coded command setconforms to AISG

Interface to BTS Ethernet (10 base T) and RS 232

Protocols to BTS TCP/IP, PPP, HTTP/HTML, UDP,DHCP, FTP, SNMP, ICMP/PING

Alarm interface to BTS 8 x open collector outputuser programmable

Max number of RCU's 27 (depending on cable configuration*)see charts on reverse for details

Max number of DTMA's 6 (depending on cable configuration*)Temperature range -25°C – +55°C

Dimensions 19 inches x 1 HU (height unit)19 x 9.8 x 1.7 inches(483 x 250 x 43.6 mm)


Standards EN 60950-1 (Safety)EN 55022 (Emission)EN 55024 (Immunity)UL 60950-1, 1st edition

Certifications CEFCC 15.107 Class BUL

* For specific configuration requirements call Kathrein Scala DivisionCommunication Sales Engineering.

Order Information:

Model Description

860 10006 Central control unit, AC/DC power supply

860 10026 Central control unit, DC power supply

Both units include the Central Control Unit, Manual, DC Cable,ethernet crossover cable. The 860-10006 also includes U.S. andEuropean syle AC Power Cords.

10729-J936.2310/f


Central Control

860 10006, 860 100

Optional Accessories:

Description

Null modem RS-232 cable for connection to a local laptop computer



KATHREIN 860 10006, 860 10026

Tested To Comply

With FCC Standards



Remote Electric Tilt860 10006, 860 10026

Star Configuration

N_RCU/sector L1max in m1 220

2 1903 170

4 150

5 1306 110

7 100

8 909 90

Daisy-chain Configuration

N_RCU Lmax in m

1 280

2 2703 260

4 2505 240

6 230

7 220

8 2109 20010 190

11 18012 170

13 170

14 16015 150

16 14017 140

18 130

19 13020 120

21 12022 110

23 110

24 11025 100

26 10027 100

The maximum control cable length (Lmax)

depends on the type of RET configuration.

In star configuration with one control cable

for each sector, the max. length of the con-

trol cable depends on the number of RCUsper sector (N_RCU/sector). In daisy-chain

configuration, the max. length depends onthe total number of RCUs (n_RCU).

The length values are listed in the tables

below.

9 inches(228.8 mm)

19 inches(483 mm)

1.7 inches(43.6 mm)

9.8 inches(250 mm)

17 inches(432.4 mm)

Star Configuration Daisy-chain Configuration




Portable Control Ad

860 100

Standards EN 60950-1EN 55022EN 55024

Certifications CEFCC part 15 Class BUL (for external power adapter)

10854-F936.2733/d

* Hand tighten only! Torque setting: 0.37–0.73 lb ft (0.5–1.0 Nm).

** If powered via AISG-interface no external power supply is needed.

*** Switchable with software.

Specifications:Connector* to RCU/TMA 1 x 8 pin connector according to IEC 60130-9,

female, conforms to AISG RF-connector (SMB male)

External power supply**Input 90–264 VAC, 47–63 HzOutput 24 VDC /3.0 A

Input voltage of PCA 24 VDC

Output voltage to AISG female pin 6 (24 VDC): 24 VDC ±10%RCU's/TMA's AISG female pin 1 (12 VDC): 14 VDC ±7%

RF male (at 24 VDC): 24 VDC ±10%***RF male (at 12 VDC): 14 VDC ±7%***

Output power AISG female pin 6 (24 VDC)(to RCU's/TMA's) without load on pin 1 (12 VDC) and on RF-plug: <60W

AISG female pin 1 (12 VDC)with max. 30W load on pin 6 (24 VDC) and/or on RF-plug: <30W

Current monitoring 10–2500 mA per branch (12V, 24V. RF)

measurement levelOver-current protection <2500 mA per branch (12V, 24V. RF)

Interface to RCU/TMA RS485 / power supply / RF connector (SMB male)

Protocol to RCU HDLC hex-coded command setconforms to AISG 1.1 and 3GPP / AISG 2.0

Interface to PC USB 1.1/2.0

System requirements Windows 2000, Windows XP (32 bit version)

Max. number 27 pcs (depending on system configurationof RCU's/TMA's and length of control cable)

Max. length of control cable 656 ft (200 m) / 9 RCUs (daisy chain configuration)492 ft (150 m) / 6 RCUs (splitter configuration)

Temperature range 0°C to +55°C

Weight 1.2 lb (0.535 kg) (including external power adapter)


Kathrein’s 860 10046 Portable Control Adapter (PCA) allows operators to

interface with Kathrein remote control units.

• CE, FCC, and UL certification

• Meets EN 60950-1, EN 55022, and EN 55024 standards

• Includes: PCA, External power supply (24 VDC / 70 W), USB cable,

AC power cable, CD-ROM (with PCA software, drivers, and manual),installation guide, and carrying case



KATHREIN 860 10046

Tested To Comply

With FCC Standards



Remote Electric Tilt860 10002

Remote ControlSignal Splitter

Mounting Options:

Model Description

Mounting for 2 to 5.7 inch (50 to 145 mm) OD masts is supplied.

Wall mounting using customer supplied screws.

* Connectors must be located at the bottom.No inverted mounting.

Supplied Mounting Clamp131 1847

10730-F936.2226/g

Specifications:

Connectors 4 x 8 pin connectoraccording IEC 60130-9, 1 male, 3 female

tightening torque for 0.4–0.7 ft-lbfattaching connectors hand tighten only

Rated current 3 A (at 50°C)

Maximum voltage 60 V




Shipping weight 1.1 lb (500 g)


Mounting * Mounting for 2 to 5.7 inch (50 to 145 mm)OD masts is supplied.Wall mounting using customer suppliedscrews.

* Connectors must be located at the bottom. No inverted mounting.

Up to three RCU’s may be powered and controlled via onecontrol cable using the 860 10002.

Input

(male)

Output 1

(female)

Output 2

(female)

Output 3

(female)



All specifi-


Lightning ProtecDevice

860 10030

Mounting Options:

Model Description

Mounting for 2 to 5.7 inch (50 to 145 mm) OD masts is supplied.

Wall mounting using customer supplied M4 screws.

* Connectors must be located at the bottom.

No inverted mounting.

Supplied Mounting Clamp131 1847

The Lightning Protection Device (LPD) is designed for lightningprotection of control cables carrying partial lightning currents up

to 25 kA (shield) and 2.5 kA (inner conductor), according to IEC

61643-1, IEC 61312-3. Each pin is protected individually.

For outdoor and indoor use.

Specifications:

Connectors 2 x 8 pin connectoraccording to IEC 60130-9,input: male, output: female

tightening torque for 0.4–0.7 ft-lbfattaching connectors hand tighten only

SPD-Type 8 x bipolar gas tube

Max impulse current 25 kA (housing, shield)*, (10/350 μs)inner conductors: 2.5 kA/pin (10/350 μs)

Max dynamic overvoltage < 700 Vat spark gap (1 kV/ μs)

Static Overvoltage < 100 V(100 V/s)

Grounding Via mounting plate / clamps at metallicsurfaces or separate cable,min. cross-section 5 mm2 Cu (screw M6)

Max operation current 4 A (at 50°C)

Max operation voltage 60 VWeight 0.55 lb (250 g)

Dimensions 4.1 x 3.6 x x 2.8 inches(103 x 91 x 72 mm)

Shipping weight 1.1 lb (500 g)


Mounting* Mounting for 2 to 5.7 inch (50 to 145 mm)OD masts is supplied.Wall mounting using customer supplied M4screws.

* Connectors must be located at the bottom. No inverted mounting.

No decoupling elements are integrated. The coordination with

additional LPD's (device input) should be checked according toIEC 61312.

Grounding of the device via the mounting plate at metallic surfaces

or via additional grounding cable (not included).

Important: A control cable with a minimum length of 2 meters is

required between the Lightning Protection Device and the CentralControl Unit at the BTS to achieve the required decoupling.



General Specifications:


Impedance 50 ohms

VSWR < 1.1:1 (800–2170 MHz)

Insertion lossPort 1↔Port 2 < 0.1 dB (800–2170 MHz)

Isolationfor DC and RCU signalsPort 1↔Port 2 >70 dBPort 1↔Port DC/RCU >70 dB

Port 2↔

Port DC/RCU 0 dBIntermodulation (2x20w) IM3: <-160 dBc

Power consumption Typically 0.6 watt

Lightning protection 3 kA, 10/350 μs pulse

Operating temperature -40° to +60° C

Modem carrier frequency 2.176 MHz

IP rating IP 66 (indoors or outdoors)

Certification FCC 15.107 Class B ComputingDevices

Dimensions 5.5 x 3.1 x 1.7 inches(140.7 x 79 x 43.5 mm)


Shipping dimensions 6.6 x 4 x 3.4 inches(167 x 102 x 86 mm)

The Smart Bias Tee combines the performance of a

standard Bias Tee (e.g. type 793 304) with the function of

an additional modem (AISG standard) in order to provideDC voltage as well as remote control signals via an RF

feeder cable to a TMA or RCU.

The Smart Bias Tee provides low RF signal insertion loss

from port 1 to port 2 and vice versa. The measures taken

to protect against static discharge and lightning ensure ahigh level of reliability and operational safety.

• 782 10253, 782 10453: 12 V version for use near theBTS, in order to feed-in DC voltage and RCU control

signals into a feeder cable

• 782 10254, 782 10454: 12 V version for use near the

antenna, in order to control an RCU (only required if noTMA is in use)

• 782 10255, 782 10455: 24 V version for use near the

BTS, in order to feed-in DC voltage and RCU controlsignals into a feeder cable

• 782 10256, 782 10456: 24 V version for use near theantenna, in order to control an RCU (only required if no

TMA is in use)

Specifications:

Connectors 782 10253 782 10254 782 10255 782 1025612V/BTS 12V/Antenna 24V/BTS 24V/Antenna

Port 1: 7-16 DIN male BTS Antenna BTS AntennaPort 2: 7-16 DIN female Feeder Feeder Feeder Feeder

Connectors 782 10453 782 10454 782 10455 782 1045612V/BTS 12V/Antenna 24V/BTS 24V/Antenna

Port 1: 7-16 DIN female BTS Antenna BTS AntennaPort 2: 7-16 DIN male Feeder Feeder Feeder Feeder

Maximum input powerPort 1 or Port 2 ≤ 750 watts (800–2170 MHz)

Port DC/RCU <2.5 A / +8 – +14 VDC <2.5 A / +8 – +14 VDC <2.5 A / +8 – +30 VDC <2.5 A / +8 – +30 VDC

10802-O936.2484/m

Abbreviations:

RCU = Remote Control Unit for

remote electrical control of

antenna tilt

BTS = Base TransceiverStation

TMA = Tower Mounted

Amplifier

AISG = Antenna Interface

Standards Group

Port 1 = Port for BTS or forAntenna

Port 2 = Port for Feeder Cable

Port DC/RCU = Port for DC

voltage and remote controlunit signals

Remote Electric Tilt782 10253, 782 10254, 782 10255, 782 10256

782 10453, 782 10454, 782 10455, 782 10456

Smart Bias Tee



Remote Electric Tilt 782 10253, 782 10254, 782 10255, 782 102

782 10453, 782 10454, 782 10455, 782 104

Antenna system Antenna system(1 sector) (1 sector)

without TMA with Kathrein TMA

782 10254 (12V)or

782 10256 (24V)

Warning:

Don’t mix12 V and 24V

Bias Tees in any configu-

ration. Always choose

corresponding voltage to

suit the TMA.

Port 1(Antenna)

Port 2(Feeder)

Port 1(BTS)

Port 2(Feeder)

Port DC/RCU(RCU)

Block diagrams Application Examples

Port DC/RCU

(CCU)

782 10253 (12V)or

782 10255 (24V)

DC cable DC cable

Warning:

Don’ tm ix 12V and 24V

Bias Tees in any configu-

ration. Always choose

corresponding voltage to

suit the TMA.

Antenna s ystem Antenna s ystem(1 sector) (1 sector)


Port 1

(Antenna)

Port 2

(Feeder)

Port 2

(Feeder)

Port 1(BTS)

Port DC/RCU

(RCU)

Port DC/RCU(CCU)

782 10454 (12V)or

782 10456 (24V)

782 10453 (12V)or

782 10455 (24V)

DC cable

DC cable



Remote Electric Tilt782 10253, 782 10254, 782 10255, 782 10256

782 10453, 782 10454, 782 10455, 782 10456

Order Information:

Model Description

782 10253 Smart Bias Tee 12V/BTS

782 10254 Smart Bias Tee 12V/Antenna







Please note:

The Smart Bias Tees are designed to operate under the

environmental conditions as described in ETS 300 019-1-4 class 4.1 E and have passed environmental tests as

recommendedin ETS 300 019-2-4.

The installation team must be properly qualified and alsobe familiar with the relevant national safety regulations.

The coupling torque at 7-16 connectors is 18.5–22 ft-lbf!

Hold the smart bias tee housing securely while tighteningthe 7-16 locking nut. The tightning torque for fixing the

3.1 inches(79 mm)

5.3 inches(140.7 mm)

1.7 inches(43.5 mm)

782 10253, 782 10255782 10453, 782 10455

782 10254, 782 10256782 10454, 782 10456

This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may cause


KATHREIN 782 10253, 782 10254

782 10255, 782 10256782 10453, 782 10454

782 10455, 782 10456

Tested To Comply

With FCC Standards

Pin connections

782 10253 782 10254 782 10255 782 10256

782 10453 782 10454 782 10455 782 10456



782 11055, 782 110

Smart Bias TeeThe Smart Bias Tee combines the performance of a standard Bias Tee

(e.g. type 793 304) with the function of an additional modem (AISGstandard) in order to provide either DC voltage as well as remote

control signals via an RF feeder cable to a TMA or RCU.

The Smart Bias Teeprovides low RF signal insertion loss from port

1 to port 2 and vice versa. The measures taken to protect againststatic discharge and lightning ensure a high level of reliability and

operational safety.

• 782 11055: +8–+30 V DC version (DC on pin 6) for use near the

BTS, in order to feed-in DC voltage and RCU controlsignals into a feeder cable

• 782 11056: +8–+30 V DC version (DC on pin 6) for use near the

antenna, in order to control an RCU (only required if noTMA is in use)

General Specifications:


Impedance 50 ohms

VSWR < 1.1:1 (690–2700 MHz)


Isolationfor DC and RCU signalsPort 1↔Port 2 >70 dBPort 1↔Port DC/RCU >70 dBPort 2↔Port DC/RCU >0 dB


Input powerPort 1 or Port 2 < 750 watts (690–2700 MHz)Port DC/RCU < 2.5 A / +8–+30 VDC

Power consumption Typically 0.6 watt



Modem carrier frequency 2.176 MHz



Dimensions 3.2 x 3.2 x 1.8 inches (without connectors)(81 x 81 x 46 mm)



See reverse for order information.

Specifications:

Connectors 782 11055 782 1105624V / BTS 24V / Antenna

Port 1: 7-16 DIN male BTS AntennaPort 2: 7-16 DIN female Feeder Feeder

11254-A936.3819a

Abbreviations:

RCU = Remote Control Unit for

remote electrical control ofantenna tilt

BTS = Base Transceiver

Station

TMA = Tower MountedAmplifier

AISG = Antenna InterfaceStandards Group

Port 1 = Port for BTS or for

Antenna

Port 2 = Port for Feeder Cable

Port DC/RCU = Port for DCvoltage and remote controlunit signals


Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.

KATHREIN 782 11055, 782 11056

Tested To Comply

With FCC Standards

Pin Connections

Remote Electric Tilt NE W



Remote Electric Tilt782 11055, 782 11056

Antenna system Antenna system(1 sector) (1 sector)


782 11056

Application Examples

782 11055

DC cable DC cable

Port 1(Antenna)

Port 2(Feeder)

Port 1(BTS)

Port 2(Feeder)

Port DC/RCU(RCU)

Block Diagrams

Port DC/RCU(CCU)

782 11056

782 11055


3.1 inches

(79 mm)

3.1 inches

(79 mm)


1.8 inches(46 mm)

1.8 inches(46 mm)



11376-A936.3769

936.3771


Bias Tee

782 10577, 782 105

782 10577: The Bias Tee is suitable to feed DC voltage into the feeder

cable of a receiving and/or transmitting antenna system in order toprovide the operating voltage for a mast head amplifier.

• The Bias Tee provides low RF signal insertion loss from the BTS tothe antenna port and vice versa.

• The DC voltage is fed from the DC port to the antenna port while

providing a high level of DC isolation from the DC to the BTS portand from the antenna to the BTS port.

• The measures taken to protect against static discharge and lightning

ensure a high level of reliability and operational safety.

782 10578: The Bias Tee is suitable to feed DC voltage and AISG control

signals into the feeder cable in order to provide operating voltageand control signals via theRF feeder cable to the TMA or RCU.

• The Bias Tee provides low RF signal insertion loss from the BTS to

the antenna port and vice versa.

• The DC voltage and AISG control signal (2.176 MHz) is fed from

the DC port to the antenna port while providing a high level of DCisolation from the DC to the BTS port and from the antenna to the

BTS port.

• The measures taken in conjunction with the CCU-LOC to protect

against static discharge and lightning ensure a high level ofreliability and operational safety.

Specifications:


Impedance 50 ohms

VSWR < 1.1:1 (690–2700 MHz)


IsolationPort 1↔Port 2 >70 dBPort 1↔DC >70 dB

Maximum input powerPort 1 < 250 watts (690–2700 MHz)DC <1 A / 0 to +30 VDC




ConnectorsPort 1 (BTS) 7-16 DIN malePort 2 (Antenna) 7-16 DIN femalePort DC SMA female


Dimensions 3.4 x 1.8 x 1.8 inches(85.4 x 46.2 x 45 mm)


Shipping dimensions 5 x 3.5 x 3 inches(128 x 88 x 75 mm)

See reverse for order information.

782 10578782 10577

NE W




Bias Tee

782 10577, 782 10578

Application ExampleApplication Example

782 10577 782 10578

Order Information:

Model Description

782 10577 Bias Tee

782 10578 Bias Tee (AISG)



The Bias Tee is suitable to feed DC voltage and AISG controlsignals into thefeeder cable in order to provide operating

voltage and control signals via theRF feeder cable to theTMA or RCU.

• The Bias Tee provides low RF signal insertion loss from

the BTS to the antenna port and vice versa.

• The DC voltage and AISG control signal (2.176 MHz) is

fed from the DC port to the antenna port while providing ahigh level of DC isolation from the DC tothe BTS port and

from the antenna to the BTS port.

• The measures taken in conjunction with the CCU-LOCto protect against staticdischarge and lightning ensure a

high level of reliability and operational safety.

Specifications:


Impedance 50 ohms

VSWR < 1.1:1 (800–2170 MHz)

Insertion lossBTS↔Antenna < 0.1 dB (800–2170 MHz)

IsolationBTS↔Antenna >70 dB (DC)BTS↔DC/AISG >70 dB (DC)

Input powerBTS <250 watts (800–2170 MHz)DC/AISG <1.8 A / 13 VDC

<0.8 A / 29 VDC




ConnectorsPort 1 BTS 7/16 DIN malePort 2 Antenna 7/16 DIN femalePort DC/AISG SMB male

Application IndoorDimensions 3.5 x 1.9 x 1.3 inches

(88 x 47 x 35.4 mm)



10995-B936.2831/a


Bias Tee

782 10429

Application Example

Antenna BTS

DC

793 304BiasTee

800–2170 MHzBias Tee

800–2170 MHz

Antenna BTS

DC/AISG



The Bias Tee is used to feed DC voltage into the feedercable of a receiving and/or transmitting antenna system

to provide the operating voltage for a tower mountedamplifier.

Design and construction:

● The Bias Tee provides low RF signal insertion loss from

the BTS to the antenna port and vice versa.

● The DC voltage is fed from the DC port to the antennaport while providing a high level of DC isolation from theDC to the BTS port and from the antenna to the BTS

port.

● The measures taken to protect against static discharge

and lightning ensure a high level of reliability andoperational safety.

● For indoor use.

Specifications:


Impedance 50 ohms

VSWR < 1.1:1 (800–2170 MHz)

Insertion lossBTS↔Antenna < 0.1 dB (800–2170 MHz)

IsolationBTS↔Antenna >70 dB (DC)BTS↔DC >70 dB (DC)

Maximum input powerBTS <250 watts (800–2170 MHz)DC <1000 mA / 0–+30 VDC




ConnectorsBTS 7-16 DIN maleAntenna 7-16 DIN femaleDC SMB male


(88 x 47 x 35.4 mm)Weight 1.3 lb (0.6 kg)


10727-C936.1953/b


Bias Tee

793 304

Application Example



The DC Stop is used in dual or multi-band antenna systems

where one or more antenna systems require a DC supply foran installed mast head amplifier. The DC Stop prevents DC

voltage from being shorted within the nonbiased antenna

system(s) and isolates the corresponding base stationoutput(s) from DC voltage.

Design and construction:The DC Stop provides low RF signal insertion loss and high

DC signal isolation from port 1 to port 2 and vice versa.

For indoor or outdoor use (IP 67).

10703-E936.1954/d

Specifications:


Impedance 50 ohms

VSWR < 1.1:1 (800–2000 MHz)< 1.2:1 (2000–2170 MHz)

Insertion loss Port 1↔Port 2 < 0.1 dB (800–2170 MHz)

Isolation Port 1↔Port 2 >70 dB (DC)

Maximum input power <750 watts (800–2170 MHz)

Intermodulation (2x20w) IM3: -160 dBcOperating temperature -40° to +70° C

ConnectorsPort 1 7-16 DIN malePort 2 7-16 DIN female



Remote Electric Tilt 793 301

DC Stop

Application Example



The DC Stop is used in dual or multi-band antenna systems

where one or more antenna systems require a DC supply foran installed mast head amplifier. The DC Stop prevents DC

voltage from being shorted within the nonbiased antenna

system(s) and isolates the corresponding base stationoutput(s) from DC voltage.

• Low RF signal insertion loss

• High DC signal isolation from port 1 to port 2 and viceversa

• Suitable for indoor or outdoor applications

For indoor or outdoor use (IP 67).

11375-A936.3521

Specifications:


Impedance 50 ohms

VSWR < 1.1:1 (280–2700 MHz)< 1.2:1 (250–380 MHz)

Insertion loss Port 1↔Port 2 < 0.1 dB (250–2700 MHz)

Isolation Port 1↔Port 2 >70 dB (DC)

Maximum input power <750 watts (250–2700 MHz)



ConnectorsPort 1 7-16 DIN malePort 2 7-16 DIN female



Remote Electric Tilt782 10850

DC Stop

782105557821085078210850

0580128705801287

2 x 78210660 (single unit)or

2 x 78210661 (double unit)

2 x 78210660 (single unit)

or2 x 78210661 (double unit)

Application Example

70.4

M 2 9 x 1 . 5

32

3 9 . 5

78210850DC - Stop

250–2700MHz

NE W



Note: See chart on the following page showing maximum totalcontrol cable lengths allowed for various numbers of RCUs

Specifications:

Connectors 2 x 8 pinIEC 60130-9, female/male

Tightening torque for 0.4–0.7 ft-lbfattaching connectors hand tighten only

Construction Shielded1 x twisted pair 100 Ω /1 MHz2 x power supply, 1 x groundAWM style 20317 I/II A/B + 20549 + 20233

Rated current 4 A (power supply) (at 50°C)

Temperature range -40° to +80° C (fixed position)

Protection class IP 67 (connected)

Cable diameter 0.3 inch (8 mm)

Flammability VL 1581 VW-1CSA FT-1

Minimum bending radiusone time 2.4 inches (60 mm)several times 4.8 inches (120 mm)

The male and female connectors of all Kathrein RET products are compat-ible componets designed to operate under the environmental conditions asdescribed in ETS 300 019-1-4 class 4.1 E.

Order Information:

Model Length

840 10407 3.3 ft (1 m)

840 10408 6.6 ft (2 m)

840 10409 16.4 ft (5 m)

840 10410 32.8 ft (10 m)

840 10432 65.6 ft (20 m)

840 10411 82.7 ft (25 m)

840 10412 131.2 ft (40 m)

840 10433 164 ft (50 m)

840 10413 196.9 ft (60 m)

840 10414 262.5 ft (80 m)

840 10415 328.1 ft (100 m)

840 10453 344.5 ft (105 m)

840 10454 360.9 ft (110 m)

840 10455 377.3 ft (115 m)

840 10451 492.1 ft (150 m)

840 10452 656.2 ft (200 m)

The Kathrein remote control cables are made with connectors to matchthe Kathrein Remote Control Unit (RCU), Signal Splitter, and Central

Control Unit (CCU).

10728-I

Remote Electric Tilt 840 104nn Ser

Remote Control C

PIN assigment per AISG:

1 +13 V DC (+12 V DC nominal)

2 not used

3 RS485 B

4 not used

5 RS485 A

6 +29 V DC (+24 V DC nominal)

7 DC Return

8 not used



840 104nn Series Remote Electric Tilt

emote Control Cable




● Designed for lightning protection of control cables used with theKathrein RCU (Remote Control Unit)

● Includes grounding cable with attached lug, one roll of butyl rubbertape, one roll of PVC tape, and hardware.

Specifications:

Maximum lightning current >20 kA (pulse 10/350 μsec)


Grounding Via stranded grounding wire6 gauge, length 24 inches,2-hole lug terminal (3 / 8 in. lug) attached

Nominal size 1 / 4 or 3 / 8 inch

Bonding conductor jacket PEmaterial type

Grounding strap material Copper

Waterproofing method Butyl rubber and PVC tape

Note The grounding kit is only suitable for use with Kathrein power supply andsignal cables:

860 10007 to 860 10015860 10029860 10032

860 10033860 10054 to 860 10060

10925-B

GC-1

Grounding Clam

2.2–2.3 inches

0.245–0.38 inches




threin Installation Tool

850 10005

Kathrein's 850 10005 installation tool is suitable for either 27

mm or 32 mm 7-16 DIN connectors.

Tighten the nut within a torque range of 18.5–24.4 lb-ft(25–33 Nm) depending on the connector manufacturer's

specifications.

Two tools are included (27mm and 32 mm).

Fits standard inch drive torque wrench.

10878-A936.2435/b

1/2” square actuationaccording to DIN 3120Form C

27 or 32 mm



Other Directional Antennas

MaximumFrequency Gain Model Polarization Input Power Connector Page

790–960 MHz 5 dBi 738 445 V 200 watts 7-16 DIN 215

1710–1880 MHz 5.5 dBi

1880–2170 MHz 6.5 dBi

790–960 MHz 5 dBi 738 446 V 200 watts N female 215

1710–1880 MHz 5.5 dBi

1880–2690 MHz 6.5 dBi

Frequency Gain Model Polarization Connector Length Page

790–1000 MHz 11 dBi 742 192V01 V 7-16 DIN 30.9 inches 216

1000–1700 MHz 11.3 dBi

1700–2170 MHz 11.5 d’Bi

806–960 MHz 10 dBi CL-900B H or V N female 29 inches 223

Log Periodic

Frequency Gain Model Polarization Connector Length Page

806–869 MHz 12 dBi TY-840 H or V N female 24.5 inches 217

824–894 MHz 12 dBi TY-860 H or V N female 24.25 inches 217

890–960 MHz 12 dBi TY-900 H or V N female 23 inches 217

806–869 MHz 12 dBi RY-840B H or V N female 29 inches 218



Yagi

Bi-Directional Multiband

Frequency Gain Model Polarization Connector Width Page

890–960 MHz 16 dBi MF-900B V N female 46.5 inches 221



806–869 MHz 18 dBi PR-850 H or V N female 68 inches 219



Half-Parabolic

213



A N T E N N A S

Kathrein offers the system designer a choice of many

directional antenna types for f ixed station applications:

Yagis, both open and radome protected, will provide long

term reliability and economy for control station, point to point

and point to multipoint applications.

Log periodic antennas offer broadband performance in

rugged, weather resistant fiberglass radomes.

Kathrein-Scala’s Paraflector® and Miniflector® Series

half-parabolic antennas offer higher gain and greater front-to-

back performance than Yagis; they excel in applications where

longevity and performance are demanded.

Kathrein’s logs, Yagis and the Miniflector and Paraflector series

offer flexibility in system design, usable for horizontal or vertical

polarization.

Our Bi-directional antennas are the perfect complement forfill-in applications for dual band carriers. Covering both the

806-960 and 1710 -2180 MHz bands, they are an excellent

choice for enclosed spaces such as arenas and stadiums, as

well as for temporary installations.

O T H E R

214



Bi-Directional Multiband AntennaV Polarization

10700-E936.1870/e

H-plane 790-960 MHz

Horizontal pattern – V-polarization

E-plane 790-960 MHzVertical pattern – V-polarization

H-plane 1710-2170 MHzHorizontal pattern – V-polarization

E-plane 1710-2170 MHzVertical pattern – V-polarization

738 445, 738 4

Order Information

Model Description

738 445 Antenna with 7-16 DIN connector

738 446 Antenna with N connector

Specifications:


Gain 790–960 MHz 5 dBi1710–1880 MHz 5.5 dBi1880–2170 MHz 6.5 dBi

Impedance 50 ohms

VSWR 790–806 MHz < 2.2:1806–824 MHz < 1.7:1824–960 MHz < 1.5:1

1710–2170 MHz < 1.5:1Polarization Vertical


Connector N or 7-16 DIN female

Weight 1.8 lb (.8 kg)



(25 N) / (65 N) / (35 N)




790–960 MHz1710–2170 MH

5 dBi gain 806–960 M

5.5 dBi gain 1710–1880

6.5 dBd gain 1880–2170

V-POL

14.6 inches(371 mm)

2.2 inches(55 mm)

15.7 inches(400 mm)

7.4 inches(188 mm)

Mounting Equipment:

Model Description


Wall mounting using customer supplied hardware.




790–2690 MHz Wideband Log–Periodic AntennaV Polarization

790–2690 MHz

11 dBi gain 790–1000 MHz

1.3 dBi gain 1000–1700 MHz

.5 dBd gain 1700–2690 MHz

V-POL

11286-A936.3956/b

Mounting30.9 inches

(785 mm)

11.8 inches

(300 mm)

6.1 inches(155 mm)

Specifications:


Impedance 50 ohms

VSWR < 1.5:1





Dimensions 30.9 x11.8 x 6.1 inches(785 x 300 x 155 mm)


(20 N) / (260 N) / (30 N)




Mounting Hardware included for masts of1.25 to 2.75 inch (30 to 70 mm) OD.

742 192V01


Gain 10.8 dBi 11 dBi 11.2 dBi 11 dBi 10.8 dBi

Horizontal beamwidth 65° (halfpower) 60° (halfpower) 55° (halfpower) 50° (halfpower) 50° (halfpower)

Vertical beamwidth 53° (halfpower) 50° (halfpower) 47° (halfpower) 45° (halfpower) 45° (halfpower)

Front-to-back ratio >25 dB >25 dB >25 dB >22 dB >25 dB

Input power maximum 300 watts (at 50°C) 250 watts (at 50°C) 200 watts (at 50°C) 170 watts (at 50°C) 150 watts (at 50°C)total 500 watts

E-Plane

Vertical patternVertical - polarization

H-PlaneHorizontal pattern


790–1000 MHz

E-Plane




1700–2690 MHz

E-Plane




1000–1700 MHz0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30




Mounting Equipment:

Model Description

MKPS-1 Mounting Kit for 2.375 inch(optional) (60 mm) OD mast.



MKPS-4 Mounting Kit for 4 inch(optional) (102 mm) OD mast.


Mounting Hardware Kit Required.

806 to 960 MHz Radome Protected Yagi AntennaH or V Polarization

RY-840B, RY-860B, RY-900B

806–869 MHz824–894 MHz890–960 MHz

12 dBi gain

H-POL

orV-POL

(Shown vertically polarized)

12 inches(305 mm)

17 inches

(432 mm)

29 inches

(737 mm)

Specifications: RY-840B RY-860B RY-900B

Frequency range 806–869 MHz 824–894 MHz 890–960 MHz

Gain 12 dBi 12 dBi 12 dBi

Impedance 50 ohms 50 ohms 50 ohms

VSWR < 1.5:1 maximum < 1.5:1 maximum < 1.5:1 maximum(1.35:1 typical) (1.35:1 typical) (1.35:1 typical)

Polarization Horizontal or vertical Horizontal or vertical Horizontal or vertical

Front-to-back ratio >18 dB >18 dB >20 dB

Maximum input power 100 watts (at 50°C) 100 watts (at 50°C) 100 watts (at 50°C)

H-plane beamwidth 58 degrees (half-power) 58 degrees (half-power) 48 degrees (half-power)E-plane beamwidth 48 degrees (half-power) 44 degrees (half-power) 40 degrees (half-power)

Connector N female N female N female

Weight 16.0 lb (7.3 kg) 16.0 lb (7.3 kg) 16.0 lb (7.3 kg)

Dimensions 29 x 17 x 12 inches 29 x 17 x 12 inches 29 x 17 x 12 inches(737 x 432 x 305 mm) (737 x 432 x 305 mm) (737 x 432 x 305 mm)

Wind load at 93 mph (150kph)Side/Top/Rear 63 lbf / 16 lbf / 37 lbf 63 lbf / 16 lbf / 37 lbf 63 lbf / 16 lbf / 37 lbf

(279 N) / (69 N) / (164 N) (279 N) / (69 N) / (164 N) (279 N) / (69 N) / (164 N)

Wind survival rating 120 mph (200 kph) 120 mph (200 kph) 120 mph (200 kph)

Shipping dimensions 31 x 20 x 14.5 inches 31 x 20 x 14.5 inches 31 x 20 x 14.5 inches(787 x 508 x 368 mm) (787 x 508 x 368 mm) (787 x 508 x 368 mm)

Shipping weight 28.0 lb (12.7 kg) 28.0 lb (12.7 kg) 28.0 lb (12.7 kg)

H-planeHorizontal pattern – V-polarizationVertical pattern – H-polarization

E-planeHorizontal pattern – H-polarization

Vertical pattern – V-polarization







RY-840B RY-900BRY-860B

Order Information:

Model Description

RY-840B Yagi antenna 806–869 MHz

RY-860B Yagi antenna 824–894 MHz

RY-900B Yagi antenna 890–960 MHzTop

Side

10057-H10058-H

10064-H



806–896 MHz890–960 MHz940–960 MHz

18 dBi gain

H-POLor

V-POL

PARAFLECTO

806 to 960 MHz High-Gain Half-Parabolic AntennaH or V Polarization

PR-850, PR-900, PR-

PARAFLECTOR is a registered trademark of Kathrein Inc., Scala Division.

PR-850 consists of:

1 x PRF-850 Feed assembly1 x PRSA Screen assembly

Specifications: PR-850 PR-900 PR-950




VSWR < 1.5:1 < 1.5:1 < 1.2:1

Polarization Horizontal or vertical Horizontal or vertical Horizontal or vertical



H-plane beamwidth 12 degrees (half-power) 12 degrees (half-power) 12 degrees (half-power)

E-plane beamwidth 24 degrees (half-power) 24 degrees (half-power) 24 degrees (half-power)


Weight 38 lb (17.2 kg) 38 lb (17.2 kg) 38 lb (17.2 kg)

Dimensions 68 x 36 x 18 inches 68 x 36 x 18 inches 68 x 36 x 18 inches(1727 x 914 x 457 mm) (1727 x 914 x 457 mm) (1727 x 914 x 457 mm)

Wind load at 93 mph (150kph)Front/Side 134 lbf / 72 lbf 134 lbf / 72 lbf 134 lbf / 72 lbf

(594 N) / (320 N) (594 N) / (320 N) (594 N) / (320 N)


Shipping dimensions 40 x 36 x 7 inches 40 x 36 x 7 inches 40 x 36 x 7 inches(1016 x 914 x 178 mm) (1016 x 914 x 178 mm) (1016 x 914 x 178 mm)

Shipping weight 47 lb (21.3 kg) 47 lb (21.3 kg) 47 lb (21.3 kg)

See the next page for order information.










PR-850 PR-950PR-900

PR-900 consists of:


PR-950 consists of:


10054-I10055-H

10056-I



806 to 960 MHz High-Gain Half-Parabolic AntennaH or V Polarization

PR-850, PR-900, PR-950

Mounting Equipment:Model Description

2 x MKPX-2 Mounting Kit for 2.375 inch(optional) (60 mm) OD mast.

MKPX-9 Mounting Kit for 2.875 inch(optional) (73 mm) OD mast.


MKPX-11 Mounting Kit for 4 inch(optional) (102 mm) OD mast.


MKTB-1 Tilt Mount Kit, 8-39 degrees tilt angle.(optional) Used with any MKPX kit listed above.


18 inches

(457 mm)

68 inches(1727 mm)

(Shown vertically polarized)

36 inches

(914 mm)

Order Information:

Model Description

PR-850 Half-parabolic antenna 806–896 MHz





890–960 MHz928–953 MHz940–960 MHz

16 dBi gain

V-POL

MINIFLECTO

890 to 960 MHz Medium-Gain Half-Parabolic AntennaV Polarization

MF-900B, MF-940B, MF-9

MINIFLECTOR is a registered trademark of Kathrein Inc., Scala Division.

MF-900B consists of:1 x MFF-900B Feed assembly1 x MFSA Screen assembly

Specifications: MF-900B MF-940B MF-950B




VSWR < 1.5:1 < 1.4:1 < 1.3:1

Polarization Vertical Vertical Vertical



H-plane beamwidth 16 degrees (half-power) 16 degrees (half-power) 16 degrees (half-power)

E-plane beamwidth 30 degrees (half-power) 34 degrees (half-power) 34 degrees (half-power)


Weight 13 lb (5.9 kg) 13 lb (5.9 kg) 13 lb (5.9 kg)

Dimensions 46.5 x 18 x 16 inches 46.5 x 18 x 16 inches 46.5 x 18 x 16 inches(1181 x 457 x 406 mm) (1181 x 457 x 406 mm) (1181 x 457 x 406 mm)

Wind load at 93 mph (150kph)Front/Side 50 lbf / 28 lbf 50 lbf / 28 lbf 50 lbf / 28 lbf

(222 N) / (121 N) (222 N) / (121 N) (222 N) / (121 N)


Shipping dimensions 47 x 18.5 x 16.5 inches 47 x 18.5 x 16.5 inches 47 x 18.5 x 16.5 inches(1194 x 470 x 419 mm) (1194 x 470 x 419 mm) (1194 x 470 x 419 mm)

Shipping weight 20 lb (9.1 kg) 20 lb (9.1 kg) 20 lb (9.1 kg)

See the next page for order information.

MF-900B MF-950BMF-940B



10043-I10044-H

10045-J

H-planeHorizontal pattern – V-polarization

E-planeVertical pattern – V-polarization







MF-900B, MF-940B, MF-950B

Note: Contact Kathrein Scala Division Sales Engineeringfor instructions regarding installation with horizontalpolarization using optional special hardware.

Mounting Equipment:

Model DescriptionMKPX-2 Mounting Kit for 2.375 inch

(optional) (60 mm) OD mast.



MKPX-5 Mounting Kit for 4 inch(optional) (102 mm) OD mast.



890 to 960 MHz Medium-Gain Half-Parabolic AntennaV Polarization

(vertically polarized)

16 inches(406 mm)

18 inches(457 mm)

46.5 inches

(1181 mm)

Order Information:

Model Description

MF-900B Half-parabolic antenna 890–960 MHz





806–960 MHz Radome Protected Log-Periodic AntennaH or V Polarization

10042-H

CL-900B

806–960 MHz

10 dBi gain

H-POLor

V-POL

(Shown vertically pol

Mounting Equipment:

Model Description




MKPS-4 Mounting Kit for 4 inch(optional) (102 mm) OD mast.



Specifications:

Frequency range 806–960 MHz (broadband)

Gain 10 dBi

Impedance 50 ohms

VSWR < 1.5:1

Polarization Horizontal or vertical



H-plane beamwidth 64 degrees (half-power)E-plane beamwidth 49 degrees (half-power)

Connector N female


Dimensions 29 x 17 x 12 inches(737 x 432 x 305 mm)

Wind load at 93 mph (150kph)Side/Top/Rear 63 lbf / 16 lbf / 37 lbf

(279 N) / (69 N) / (164 N)


Shipping dimensions 31 x 20 x 14.5 inches(787 x 508 x 368 mm)


H-plane

Horizontal pattern – V-polarizationVertical pattern – H-polarization



12 inches(305 mm)

17 inches(432 mm)

29 inches(737 mm)

Top

Side



Omnidirectional Antennas

225

Frequency Electrical

Range Gain Model Downtilt Polarization Connector Height Page

698-894 MHz 6 dBi 840 10510 0° X 7-16 DIN 24 inches 2271710–2170 9 dBi

6 dBi 840 10511 0° X 7-16 DIN 24 inches 227

9 dBi

6 dBi 840 10512 0° X 7-16 DIN 24 inches 227

9 dBi integrated combiner

6 dBi 840 10513 0° X 7-16 DIN 24 inches 227

9 dBi integrated combiner

806-960 MHz 2 dBi K751161 0° V N 13.7 inches 228

824-894 MHz 11 dBi 738 192 0° V 7-16 DIN 127.4 inches 229

870-960 MHz 8 dBi OGB6-915N 0° V N 60.6 inches 230

8 dBi 736 350 0° V 7-16 DIN 60.6 inches 230

11 dBi OGB9-915N 0° V N 119.5 inches 231

11 dBi 736 347 0° V 7-16 DIN 119.5 inches 231

890-960 MHz 5 dBi K7515641 0° V N 28.1 inches 232

902-928 MHz 10 dBi 840 10250 0° H N 83.9 inches 233

902-928 MHz 13.4 dBi SL11-915N/DT2 2° H N 180.25 inches 234

928-953 MHz 13.4 dBi SL11-940N/DT2 2° H N 156.25 inches 235

1710-2700 MHz 2 dBi 800 10431 0° V N 4.55 inches 236

2500-2700 MHz 11 dBi 800 10442 0° V 7-16 DIN 44.6 inches 237



A N T E N N A S

Kathrein’s omni-directional antennas are extremely

robust, using the finest fiberglass, brass and aluminum.

Applicable mounting hardware is fabricated from stainless

steel. Many models may be inverted. Higher gain antennas

can be provided with downtilt as well.

Kathrein’s Omni-directional antennas are well suited for:

✦ Wireless

✦ Paging

✦ SMR

✦ Land Mobile

✦ SCADA

✦ WISP

Of special note are Kathrein’s Paraslot® horizontally

polarized omni-directional antennas. These outstanding

performers offer the system designer addition polarization

protection from the many vertically polarized and unlicensed

systems in the 902-928 MHz band. The Paraslot design has

earned itself a reputation for reliability among the many

UHF-TV broadcasters who’ve employed it for day-in, day-out

operations for nearly 30 years.

226



Dualband 700 MHz Omni AntennaX Polarization

Gain 6 dBi, 9 dB

698–894 MHz1710–2170 MH

X - POL

0° Electrical Down

840 10510, 840 1051

840 10512, 840 1051

Mounting Equipment:

Description

Designed to be mounted on top of a utilitypole using a custom mounting bracketsupplied by the customer.

Order Information:

Model Description

840 10510 Brown Omni Antenna

840 10511 Grey Omni Antenna

840 10512 Brown Omni Antenna with Combiner

840 10513 Grey Omni Antenna with Combiner

Specifications : 698–806 MHz 806–894 MHz 1710–1880 MHz 1850–1990 MHz 1920–2170 MHz

Gain (typical) 4.5 dBi 6.5 dBi 9 dBi 9 dBi 8.5 dBi



11202-D

24 inches(609 mm)

26.8 inches(682 mm)

13.9 inches(353 mm)

16 inches(407 mm)



698–894 MHz

Horizontal pattern±45°-polarization

880 MHz

Vertical pattern±45°-polarization

880 MHz

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

1710–2170 MHz

Horizontal pattern±45°-polarization

1945 MHz

Vertical pattern±45°-polarization

1945 MHz

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

NE W



VSWR <1.5:1

Impedance 50 ohms



Connector 2 or 4 x 7-16 DIN female (long neck)













806–960 MHz Omnidirectional AntennaV Polarization

Gain 2 dBi

806–960 MHz

V - POL


K751161

13.7 inches(348 mm)

16.7 inches(424 mm)

Specifications:


Gain 2 dBi

Impedance 50 ohms

VSWR < 1.5:1

Intermodulation (2x5w) IM3: -150dBc



H-plane beamwidth OmniE-plane beamwidth 78 degrees (half-power)

Connector N female

Weight 1.6 lb (.74 kg)







Order Information:

Model Description

K751161 Antenna with N connector0° electrical downtilt

Mounting Equipment:

Description

Mounting hardware supplied.A. Mounting for 1.6 to 2.1 inch (40 to 54 mm) OD mast.B. Mounting for 0.8 to 2.1 inch (20 to 54 mm) OD mast.

B

MOUNTING

A

H-plane

Horizontal patternV-polarization

E-planeVertical patternV-polarization

10062-I936.450/j

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30





Gain 11 dBi

806–894 MHz

V - POL

738 192

H-plane



127.4 inches(3237 mm)

136.5 inches(3467 mm)

Mounting Equipment:

Description

Mounting hardware supplied.

For masts of 2 to 3.75 inch (50 to 94 mm) OD.

Specifications:


Gain 11 dBi

Impedance 50 ohms

VSWR < 1.5:1













11242-A936.1375/h

MOUNTING

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30



http://slidepdf.com/reader/full/kahrein-katalogas 246/36530 11031-B936.1275/h

Specifications:


Gain 8 dBi

Impedance 50 ohms

VSWR < 1.5:1













H-plane



Order Information:

Model Description

OGB6-915N Antenna with N connector0° electrical downtilt

736 350 Antenna with 7-16 DIN connector0° electrical downtilt

Mounting Equipment:

Description


For masts of 2 to 3.75 inch (50 to 94 mm) OD.




Gain 8 dBi

870–960 MHz

V - POL


OGB6-915N, 736 350

MOUNTING




H-plane



10046-K936.376/ij

Specifications:


Gain 5 dBi

Impedance 50 ohms

VSWR < 1.5:1




H-plane beamwidth OmniE-plane beamwidth 30 degrees (half power)

Connector N female








Order Information:

Model Description

K7515641 Antenna with N connectorOGB3-900N 0° electrical downtilt

B

MOUNTING

A

28.1 inches(715 mm)

30.9 inches(786 mm)


Gain 5 dBi

890–960 MHz

V - POL


K7515641

Mounting Equipment:

Description

Mounting hardware supplied.A. Mounting for 1.6 to 2.1 inch (40 to 54 mm) OD mast.B. Mounting for 0.8 to 2.1 inch (20 to 54 mm) OD mast.




0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

H-planeVertical patternH-polarization

E-planeHorizontal pattern

H-polarization

Specifications:


Gain 10 dBi (maximum)

Impedance 50 ohms

VSWR < 1.5:1

Polarization Horizontal

Maximum input power 100 watts (at 50°c)

H-plane beamwidth 12 degrees (half-power)

Connector N






Shipping dimensions 92 x 6 x 6 inches (2337 x 152 x 152 mm)


PARASLOT is a registered trademark of Kathrein Inc., Scala Division.

Mounting Equipment:

Model Description

Mounting kits are available for attachment to a flat verticalsurface or to masts with 2.375 to 3.5 inch (60 to 89 mm) OD.

MKPS-13 Mounting Kit for mounting to a(optional) flat plate

MKPP-23 Mounting Kit for 2.375 to 3.5 inch(optional) (60 to 89 mm) OD mast.

See Mechanical Accessories Section for more information.

10964-D

902–928 MHz Omnidirectional PARASLOT ® AntennaH Polarization

PARASLOT ®

Gain 10 dBi

902–928 MHz

H - POL

0° Electrical Down

840 10250

The Kathrein-Scala 840 10250 Paraslot ® antenna is specificallydesigned for spread spectrum systems and other applications

in the 902–928 MHz ISM band, featuring high gain and an offset

omnidirectional pattern.

The H-polar ized 840 10250 provides isolat ion f romco-channel and adjacent-channel V-polarized signals. The

Kathrein-Scala Paraslot design used in these antennas has earned

a reputation for high performance and reliability in thousands oflow-power UHF-TV broadcast transmission systems during the

past 25 years.


2.6 in (65 mm)

23.7 inches(602 mm)

The top mounting bracket should belocated approximately 2 in. (51 mm)below the radome collar. The bottommounting bracket should be locatedapproximately 4 in. (102 mm) abovethe bottom of the antenna.

Radome collar



H-plane

Vertical patternH-polarization2° electrical downtilt


H-polarization

Specifications:


Gain 13.4 dBi (maximum)

Impedance 50 ohms

VSWR < 1.35:1



H-plane beamwidth 5.8 degrees (half-power)

Electrical downtilt 2 degrees (other values optional)

Connector N female



Diameter 2.375 inches (60 mm)





10059-J

Mounting Equipment:

Model Description

MKPS-13 Mounting Kit for mounting to a flat plate(optional)


MKGK-1 Guy Kit(optional)

MKSK-1 Spreader Kit(optional)

See Mechanical Accessories Section for more mounting information.

Kathrein Scala Division recommends that this antenna be secured from the top in addition to the standard bottom mounting. Contact Kathrein Scala Division Engineering for assistance.

180.25 inches(4578 mm)

2.375 in (60 mm)

SL11-915/DT2

PARASLOT ®

Gain 13.4 dBi

902–928 MHz

H-POL



The Kathrein-Scala SL11-915/DT2 Paraslot antenna isspecifically designed for spread spectrum systems and

other applications in the 902–928 MHz ISM band, featuring

high gain and an offset omnidirectional pattern.




10072-J

Specifications:


Gain 13.4 dBi (maximum)

Impedance 50 ohms

VSWR < 1.35:1



H-plane beamwidth 5.8 degrees (half-power)

Electrical downtilt 2 degrees (other values optional)

Connector N female



Diameter 2.375 inches (60 mm)



Shipping dimensions 167 x 7 x 6 inches

(4242 x 178 x 152 mm)Shipping weight 35 lb (15.9 kg)

H-plane

Vertical patternH-polarization2° electrical downtilt


H-polarization

156.25 inches(3969 mm)

2.375 in (60 mm)


The Kathrein-Scala SL11-940/DT2 Paraslot antenna is specificallydesigned as a central-station antenna for MAS systems operating

in the 928–953 MHz band, featuring high gain and an offset

omnidirectional pattern.


Mounting Equipment:

Model Description

MKPS-13 Mounting Kit for mounting to a flat plate(optional)


MKGK-1 Guy Kit(optional)

MKSK-1 Spreader Kit(optional)

See Mechanical Accessories Section for more mounting information.

Kathrein Scala Division recommends that this antenna be secured from the top in addition to the standard bottom mounting.Contact Kathrein Scala Division Engineering for assistance.

SL11-940/DT

PARASLOT ®

Gain 13.4 dBi

928–953 MHz

H-POL

2° Electrical Down



Omnidirectional AntennaV Polarization

Specifications:


Gain 2 dBi

Impedance 50 ohms

VSWR < 1.8:1




H-plane beamwidth OmniE-plane beamwidth 78°

Connector N female




Mounting Equipment:

Description

Mounts through a 0.63 inch (16 mm) hole to surfaces of0.39 inch (10 mm) thick.

Antenna may be inverted.

800 10431

2 dBi gain

1710–2700 MHz

V-POL


H-plane


10975-A936.2913



2500–2700 MHz Omni AntennaV Polarization

Gain 11 dBi

2500–2700 MH

V - POL

0° Electrical Down

800 10442

H-planeHorizontal pattern

V-polarization


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30


MOUNTING


Order information:

Model Description

800 10442 2500–2700 MHz Omni antenna

Specifications:


Gain 11 dBi

Impedance 50 ohms

VSWR < 1.5:1







Height approx. 44.6 inches (1132 mm)




Shipping dimensions approx. 48.5 x 5.8 x 4.4 inches(1232 x 148 x 112 mm)

10979-D936.3117/c




Indoor and Special Application Antennas

Frequency Horizontal

Range Model Beamwidth Polarization Page

790–960 MHz 800 10249 Omni V 241

1425–3800 MHz

5150–6000 MHz

790–960 MHz 800 10709 Omni V 242

1710–2700 MHz

790–960 MHz 800 10465 90° V 243

1710–2700 MHz

790–960 MHz 800 10677 90° V 244

1710–2700 MHz +45° and -45°

1710–2700 MHz 741 573 Omni V 245

1710–6000 MHz 800 10430 Omni V 246

239

Horizontal

Model Connector Beamwidth Polarization Page

GPS-C N Omni RHCP 247

800 10147 N Omni V 248

OG-860/1920/GPS-A N Omni V, RHCP 249

E-911

Indoor



A P P L I C A T I O N A N T E N N A S

E xtending wireless coverage to the interior of buildings

is the goal of distributed antenna systems, and Kathrein

has many indoor antenna models to meet the requirements

of any system. Our broad band devices cover the standard

wireless bands, with several models that encompass spectrum

employed by WiFi, WiMAX, and UNII protocols.

In conjunction with our power dividers and power taps the

system designer may accommodate virtually any distributed

antenna configuration.

240

Kathrein-Scala offers f ixed mount GPS antennas for

timing, oscillator synchronization and 911 applications.

A new offering for the wireless carrier is our low profile,

dualband omni. Designed especially for utility pole

installation, this antenna is ideal for microcell applications in

urban and suburban environments.



Indoor Omnidirectional AntennaV Polarization

790–960 MHz1425–3800 MH5150–6000 MH

800 10249

3.7 inches(94 mm)

10.2 inches(258 mm)

Specifications:

Frequency range 790–960 MHz1425–3800 MHz5150–6000 MHz

Gain ≈ 2 dBi

Impedance 50 ohms

VSWR 790–806 MHz < 1.7:1806–960 MHz < 1.5:11425–1710 MHz < 2.0:11710–2200 MHz < 1.4:1

2200–3800 MHz < 1.6:15150–6000 MHz < 2.2:1



H-plane beamwidth Omni

Connector N female





10848-C936.2506/c

Mounting Options:

Description

Mounts to ceiling using three screws (two types supplied).A 1.4 in. (35 mm) hole is required for the N connector.



Omnidirectional Indoor AntennaHorizontal and Vertical Polarization

800 10709

790–960 MHz1710–2700 MHz

11315-A936.3783

Specifications: 790–960 MHz / 1710–2700 MHz


VSWR 790–960 MHz < 2:11710–2700 MHz < 2:1


Specifications: 2500–2700 MHz

Frequency range 2500–2700 MHzVSWR < 2:1



Gain ≈ 2 dBi

Impedance 50 ohms



Connector 2 x N female




(258 x 258 x 94 mm)Shipping dimensions 10.9 x 10.9 x 6.7 inches

(277 x 277 x 169 mm)

Mounting Mounts to ceiling using three screws(two types supplied).

790–9601710–2700

VPol2500–2700

HPol

N N

3.7 inches(94 mm)

10.2 inches(258 mm)

Clip the protective housing into position after

the antenna has been mounted with the help

of the three supplied screws.

min. ∅ 2.6 inches

(min. ∅ 65 mm)

Mounting Options:

Description

Mounts to ceiling using three screws (two types supplied).A 1.4 in. (35 mm) hole is required for the N connector.

NE W



Indoor Directional Antenna with Integrated CombinerVertical Polarization

800 10465

90°

790–960 MHz1710–2700 MH

Indoor Antennawith

Integrated Combi

Specifications:

Frequency range 790–960 MHz and 1710–2700 MHz

Gain 7 dBi approx.

Impedance 50 ohms

VSWR 790–806 MHz < 2.2:1806–960 MHz < 2.0:11710–2700 MHz < 2.0:1


Maximum input power 50 watts (at 50° C)

H-plane beamwidth 90 degrees approx. (half-power)

Connector N female connector with 39 inch (1 m)RG-223/CU coax pigtail






11006-B936.3036/b

Mounting:

Mount the attachment plate to the wallusing two screws of 4 mm diameter(not supplied) in the position as indicated.

Align the antenna over theattachment plate.

Pull the antenna to the stop.

C

806–960VPol

1710–2700VPol

N

Mounting Options:

Description

Mounting clip supplied


0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30

0

3 0

6 0

90

1 2 0

1 5 0

180 2 1 0

2 4 0

270

3 0 0

3 3 0

3

10

20

30



http://slidepdf.com/reader/full/kahrein-katalogas 260/36544 11229-A936.3616

Dualband Indoor Directional Antennawith Integrated CombinerVertical and X Polarization

800 10677

90°

790–960 MHz1710–2700 MHz

Indoor Antennawith

Integrated Combiner

Specifications:

Frequency range 790–960 MHz and 1710–2700 MHz

Gain 7 dBi approx.

Impedance 50 ohms

VSWR < 2.0:1

Polarization790–960 MHz Vertical1710–2700 MHz +45° and -45°

Maximum input power 50 watts (at 50° C)

H-plane beamwidth 90 degrees approx. (half-power)

Connector N female connectors with 39 inch (1 m)RG-223/CU coax pigtails

Isolation >25 dB






Mounting Mounting clip supplied


Mounting Options:

Description

Mounting clip supplied

Mounting:

Mount the attachment plate to the wallusing two screws of 4 mm diameterin the position as indicated.

Align the antenna over theattachment plate.

Pull the antenna to the stop.

C

N

790–960VPol

1710–2700XPol –45

1710–2700XPol +45

N



Mounting Options:

Description

Mounts to ceiling using screws. A 1.4 in. (35 mm) hole is requiredfor the N connector.

741 573

1710–2700 MH

WidebandIndoor Antenna

3.9 inches

(100 mm)

Clip the protective housing into position after the antennahas been mounted using the supplied screws

10717-D936.2010/e

Specifications:


Gain 2 dBi

Impedance 50 ohms

VSWR 1710–1880 MHz <1.6:11850–1990 MHz <1.6:11920–2170 MHz <1.6:12170–2500 MHz <2:12500–2700 MHz <2.2:1




Connector N female



Mounting Mounts to ceiling using screws.A 1.4 in. (35 mm) hole is required for the Nconnector.

Indoor Omnidirectional AntennaVertical Polarization



E-911 AntennaRighthand Circular Polarization

● Receives both GPS precision timing signals .

● Assists in compliance with FCC GPS location requirements.

● All the metal parts are DC grounded.

GPS specifications:

Frequency range 1575.42 ± 10 MHz

Gain 4 dBic

Pre-amp filtering (typical) -30 dB at ± 100 MHz

Polarization Righthand circular


E-plane beamwidth 105 degrees (half-power)

LNA gain >26 dB

Noise figure <1.6 dB(including pre-filtering)

VSWR Antenna <1.5:1LNA <2:1

Connector N female

DC power +5 Vdc, 20 mA through N output connector

Temperature range -35° C to +70° C






Wind survial rating 120 mph (200 kph)

Gain 4 dBic

1575 MHz

RHCP

GPS-C

2 inches

(51 mm)

5.5 inches

(140 mm)

2.6 inches

(65 mm)

3.2 inches

(80 mm)

Mounting

Mounting Information:

Description


For masts of 2.125 to 3 inch (55 to 75 mm) OD.10833-C

Horizontal pattern

Vertical pattern



Dualband Omnidirectional AntennaVertical Polarization

Gain 2 dBi

824–960 MHz1805–2170 MHz

V-POL

Indoor & Outdoor

800 10147

H-plane



● Unity-gain dualband fixed-station antennas.

● Compact in size and rugged in construction.

● Superior electrical and mechanical design and performance.

● Long service life.

● All metal parts are DC grounded.

Specifications:Frequency range 824–960 MHz

1805–2170 MHz

Gain 2 dBi

Impedance 50 ohms

VSWR < 2.0:1






Connector N female





Description

Mounts in a 0.63 inch (16 mm) diameter hole in surfaces of 0.39inch (10 mm) maximum thickness.

10740-A936.2339

Order Information:

Model Description

800 10147 Dualband Omnidirectional Antenna



Dualband E-911 AntennaVertical or Righthand Circular Polarization

Wireless specifications: (Receive only)


Gain 824–894 MHz 1.5 dBi1850–1990 MHz 2 dBi

VSWR 824–894 MHz < 2.0:11850–1990 MHz < 2.0:1

Impedance 50 ohms




Connector N female

● Receives both GPS precision timing signals andwireless phone bands.

● TDOA (time-difference of arrival) systemsready.

● Assists in compliance with FCC GPS location

requirements.

● All metal parts are DC grounded.

GPS specifications:

Frequency range 1575.42 ± 10 MHz

Gain 4 dBic

Pre-amp filtering (typical) -30 dB at ± 100 MHz

Polarization Righthand circular



LNA gain >26 dB

Noise figure <1.6 dB(including pre-filtering)

VSWR Antenna <1.5:1LNA <2:1

Connector N female

DC power +5 Vdc, 20 mA through Noutput connector

Temperature range -35° C to +70° C






Wind survial rating 120 mph (200 kph)

Gain 1.5, 2 dB

4 dBic

824–8941850–19901575 MHz

V-POL

RHCP

OG-860/1920/GPS

Mounting 10816-C


Description

Hardware is included for mounting to a 2.125 to 3 inch(55 to 75 mm) OD mast.

2 inches(51 mm)

2.6 inches

(65 mm)

3.2 inches

(80 mm)

13 inches(330 mm)

Horizontal pattern Vertical pattern

1850–1990 MHz

Horizontal pattern Vertical pattern

1575 MHz

Vertical patternHorizontal pattern

824–894 MHz



Frequency Range (MHz) Maximum Input Power Model Page

824–835 / 869–880 MHz < 400 W (high band) 782 10168, 782 10169, 782 10170 287835–851 / 880–896 MHz < 400 W (high band) 782 10171, 782 10172 287

835–851 / 880–896 MHz < 400 W (high band) 782 10215, 782 10216 285824–846.5 / 869–891.5 MHz < 400 W (high band) 782 10257 285

824–846.5 / 869–891.5 MHz < 800 W (high band) 782 10265 285

1850-1930 / 1930-1990 MHz < 150 W (low or high band) 792 544 289

Duplexers

TMA’s, Filters, & Electrical Accessories

Power Dividers & Power Taps Frequency Range Model Page

694–2700 MHz 860 10017 2-way power divider for indoor use only 268

860 10018 3-way power divider for indoor use only 268

860 10019 4-way power divider for indoor use only 268

694–3800 MHz 860 10100 2-way RF power divider for outdoor & indoor use 263

860 10102 3-way RF power divider for outdoor & indoor use 263


694–3800 MHz 860 10101 2-way RF power divider for outdoor & indoor use 263



790–960 MHz PDL2-55, PDL3-333, PDL4-2222 RF power divider for outdoor & indoor use 264

790–960 MHz / 1710–2500 MHz 860 10023, K63236001 Adjustable indoor power tap 265

694–2700 MHz 860 10136, 860 10137, 860 10138 Indoor power tap 267

CombinersFrequency Range Maximum Input Power Model Page

380–960 / 1710–2700 MHz < 700 W 782 10680, 782 10681, 782 10682, 782 10683 269Dualband Combiner

470–960 / 1710–2700 MHz < 650 W / < 350 W 782 10660, 782 10661, 782 10662, 782 10663 271782 10664, 782 10665 - Dualband Combiner

1850–1910 / 1930–1990 MHz < 250 W 782 10809, 782 10810 2731710–1755 / 2110–2155 MHz Dualband Combiner

1850–1910 / 1930–1990 MHz < 275 W 782 10469, 782 10808 275

1710–1755 / 2110–2155 MHz Dualband Combiner

1710–2180 / 2400–2700 MHz < 300 W 782 10800 782 11091, 782 11092, 782 11093 277782 11094, 782 11095 - Dualband Combiner

698–2690 MHz < 60 W 782 10504 - Hybrid Combiner 279

806–960 MHz < 300 W 792 699 - Hybrid Combiner 281

806–960 MHz or 1710–2170 < 60 W 782 10500, 782 10502 - Hybrid Combiner 283


782 10401 Dual tower mount amplifier PCS/PCS/24 dB 259

782 10404 Dual tower mount amplifier PCS/PCS/24 dB 261

782 10601 Dual tower mount amplifier PCS/AWS/12dB 255

782 10606 Dual tower mount amplifier AWS/AWS/12dB 257

782 10811 Dual tower mount amplifier PCS/PCS/12dB 253

Tower Mount Amplifiers

251

Filters, Couplers, Circulators, Hybrid Ring Junctions, 50 Ohm Loads, GPS AmplifierSee the following page for summary list.



E L E C T R I C A L

Kathrein offers an extensive line of filter products for wireless

applications, including hybrids, milled filters, duplexers, ferrites, power

dividers and taps, diplexers/combiners, and high performance tower

mounted amplifiers, virtually every electrical accessory needed to satisfy

both everyday design problems and “special circumstance” issues is

available.

From difficult to routine, Kathrein has the right filter to give maximum

performance.

252

CouplersFrequency Range Maximum Input Power Model Page

800–2200 MHz < 100 W 793 555 - 3 dB Coupler with Cable Absorber 300

800–1900 MHz < 350 W 792 964, 792 965 - 6 dB Couplers 297792 966, 792 967 - 10 dB Couplers

806–960 MHz < 500 W 793 506 - 3 dB Coupler (90° Hybrid) 295

800–2200 MHz < 300 W 793 554 - 3 dB Coupler (90° Hybrid) 298

806–960 MHz < 500 W K637061, K637067 - 3 dB Couplers (90° Hybrid) 294

806–960 MHz < 350 W 792 937, 792 170 - 4.7 dB Couplers 296793 105, 792 180 - 6 dB Couplers793 106, 793 107 - 7 dB Couplers793 108, 790 213 - 10 dB Couplers

1700-2200 MHz < 300 W 793 006 - 3 dB Coupler 299

1700-2200 MHz < 150 W 792 702 - 3 dB Coupler with Cable Absorber 301

Frequency Range Model Page

806-960 MHz 728 044, 729 812 - Decoupled Power Splitters 302

806–960 MHz K6373621 - Hybrid Ring Junction 303

890–960 MHz 790 881 - Hybrid Ring Junction 303

1710-1880 MHz 791 498 - Hybrid Ring Junction 303

0 to 4000 MHz 50 Ohm RF Loads (various power ratings and frequency ranges) 305

1575.42 MHz, L1-signal 860 10142 - Low Noise GPS Amplifier 284

Power Splitters, Hybrid Ring Junctions, 50 Ohm Loads, GPS Amplifier

FiltersFrequency Range Maximum Input Power Model Page

1550–1700 / 1700–1900 MHz < 15 W 791 594, 791 397 - Band-Stop Filter 290

1800–2000 MHz < 15 W 791 398 - Bandpass Filter 292

1800–2000 MHz < 25 W 792 219 - Band-Stop Filter 293



Dual Tower Mount AmplifierPCS/PCS/12 dB

Rx Characteristics:


Bandwidth 60 MHz

Loss in bypass mode 2.8 dB (typical)

Return loss > 18 dB (DC ON)> 15 dB (DC OFF)

Gain -40 – +65° C 12 ± 1.3 dB+22 – +28° C 12 ± 0.7 dB

Noise figure -40 – +65° C <2.2 dB over the middle 80% of BWa further 0.3 dB over the remaining BW

+22 – +28° C <1.7 dB over the middle 80% of BWa further 0.3 dB over the remaining BW

Output 1-dB compression point >15 dBm

3rd order intercept point (OIP3) >25 dBm

DualTower Mount Amp

782 10811

Ant 0

Ant 1

BTS 0

BT

• Double unit for easy use with XPol antennas• Kathrein redundancy amplifier design for improved system reliability• By-pass mode to ensure cell operation in case of DC power down• Built-in lightning protection• Compact size• DTMA AISG feed via BTS 0 port or BTS 1 port for both TMAs• AISG DC supply either through one of the ports BTS 0 or BTS 1,

or simultaneously through both ports BTS 0 and BTS 1• Current Window Alarm DC supply feed via BTS 0 (TMA 0) and BTS 1 (TMA 1)

Environmental Characteristics:

Operating temperature range -40 – +65°C

IP rating IP 67*MTBF >1,000,000 hours (per TMA)

EMC ETS 300 342-3

Lightning protection 5 kA, 8/20 μs RF connections and AISG port

Tx Characteristics:


Bandwidth 60 MHz

Insertion loss < 0.5 dB over the middle 80% of BWa further 0.25 dB over the remaining BW

Input power < 160 W (+52 dBm) CW<1.6 kW (+62 dBm) Peak

Intermodulation products in Rx band < -160 dBc (3rd order; with 2 x 20 W)

Return loss >18 dB

DC and Alarm Characteristics: CWA-Mode AISG-Mode

DC supply 9–15 V 9–30 V

Operating current per TMA 80-–130 mA 95 mA 9 V (nominal)without RET 35 mA at 30 V (nominal)

Alarm management 170–200 mA AISG 1.1/2.0

Modem characteristics AISG 1.1/2.0(data rate 9.6 kb)

Mechanical Characteristics:

Material Aluminum housing

ConnectorsRF 7-16 DIN female, long neckAISG connector 8 pin female, IEC 60130-9*(compliance AISG 1.1/2.0) (Pin 6: 9 – 30 V DC, pin 3: RS485B,

pin 5: RS485A, pin 7: DC return;other pins: Not connected)

Mounting Wall mounting with 4 screws (8mm max.)Mast mounting with optional clamp set.

Weight approx. 11 lb (5 kg)

Dimensions (without connectors 10.9 x 6.5 x 3.1 inchesor mounting brackets) (278 x 166 x 77.5 mm)


* The DTMA is not designed for permanent operation under water.

Test conditions for the IP67 rating: submerge depth: 1 m; submerge time: 24 hours 11089-FROa936.A2553

RET Remote Electrical TiltAISG Antenna Interface Standards GroupCWA Current Window Alarm

TMA TMA

PCS BTS 0 PCS BTS 1

PCS Ant 0 PCS Ant 1



Fullband DupleTower Mount Amp

782 10601

* The DTMA is not designed for permanent operation under water.Test conditions for the IP67 rating: submerge depth: 1 m; submerge time: 24 hours

• Kathrein redundancy amplifier design for improved system reliability• Built-in lightning protection

• Compact size• Suitable for antenna RET control according to AISG standard

10957-A936.A2404/b

Fullband Duplex Tower Mount AmplifierPCS/AWS/12 dB

Tx Characteristics: PCS AWS

Frequency range 1930–1990 MHz 2110–2155 MHz

Bandwidth 60 MHz 45 MHz

Insertion loss < 0.5 dB over the middle 80% of BW < 0.3 dBa further 0.25 dB over the remaining BW

Ripple ±0.2 ±0.1

Input power < 200 W (+53 dBm) < 200 W (+53 dBm)

Intermodulation products in Rx band < –160 dBc (3rd order; with 2 x 20 W) < –160 dBc (3rd order; with 2 x 20 W)

Return loss 18 dB 18 dB

Rx Characteristics: PCS AWS


Bandwidth 60 MHz 45 MHz

Return loss 18 dB 18 dB

Gain -40 – +65° C 12 ± 1.3 dB 12 ± 1 dB+22 – +28° C 12 ± 0.7 dB 12 ± 0.35 dB

Noise figure -40 – +65° C < 2.1 dB over the middle 80% of BW < 1.3 dBa further 0.3 dB over the remaining BW

+22 – +28° C < 1.6 dB over the middle 80% of BW < 1 dBa further 0.3 dB over the remaining BW

Output 1-dB compression point >15 dBm >15 dBm

3rd order intercept point (OIP3) >25 dBm >25 dBm



Connectors RF 7-16 DIN female long neckAISG connector 8-pin female, IEC 60130-9 (AISG)(Compliance AISG) (Pin 3: RS485B, pin 5: RS485A, pin 6: +24 VDC nominal,

pin 7: DC return; other pins: NC)

Mounting Wall mount with 4 screws (max. 8mm dia.)Mast mount with optional clamp set

Weight 11 lb (5 kg)

Dimensions 10.9 x 6.5 x 3.1 in (278 x 166 x 77.5 mm)

Shipping dimensions 19.8 x 10.3 x 8.4 in (502 x 262 x 214 mm)


Operating temperature range -40 – +65°C

IP rating IP 67*

MTBF >1,000,000 hours (per TMA)

EMC ETS 300 342-3

DC and Alarm Characteristics:

DC supply without RET +10 – +30 VDC (negative ground)

Operating current PCS 100 ±20 mA (+10 – +15 VDC)AWS < 200 mA

Alarm management PCS CWA, > 180 mAAWS AISG

Modem characteristics According to AISG standard 1.1(data rate: 9.6 kB)

PCS BTS

PCS Ant

AWS A

AWS B



782 10601

Mounting Options:

Model Description


Mast mounting with optional clamp set above.

Wall mounting with 4 screws (8mm max.)

Must be mounted with the AISG connector at the bottom.

See Mechanical Accessories section for more information.

Fullband Duplex Tower Mount AmplifierPCS/AWS/12 dB

Node B

M8 x 10Grounding screw

BTS ANT

AISGConnector

3.9 in(98.7 mm)

6.8 in(172 mm)

15.9 in(404.5 mm)



Mounting Options:

Model Description





782 10606Fullband Duplex Tower Mount Amplifier

AWS/AWS/12 dB


BTS ANT

15.9 inches(405 mm)

6.8 inches(172 mm)

Must be mounted with the AISGconnector at the bottom.

3.9 inches(99 mm)




Rx Characteristics:


Bandwidth 60 MHz

Loss in bypass mode 2.8 dB (typical)

Return loss > 18 dB (DC ON)> 15 dB (DC OFF)

Gain -40 – +65° C 24 ± 1.2 dB+22 – +28° C 24 ± 0.6 dB





DualTower Mount Amp

782 10401

Ant 0

Ant 1

BTS 0

BT

• Double unit for easy use with XPol antennas• Kathrein redundancy amplifier design for improved system reliability• By-pass mode to ensure cell operation in case of TMA (Alarm 2) or DC power down• Alarm management: Supports 2 alarm levels

Alarm 1: One LNA of the balanced circuit failedAlarm 2: Both LNAs of the balanced circuit failed

Automatically switched to bypass mode• Built-in lightning protection• Compact size• DTMA DC supply and alarming separately via BTS 0 repectively BTS 1 port

Environmental Characteristics:Operating temperature range -40 – +65°C

IP rating IP 67*


EMC ETS 300 342-3


Tx Characteristics:


Bandwidth 60 MHz



Intermodulation products in Rx band < -117 dBm (2 Tx carriers at +43 dBm)

Return loss >18 dB

DC and Alarm Characteristics:

DC supply +12V nominal (7.5–15V, minus grounded)Typically 230 mA per TMA

Alarm management Current window alarm handlingAlarm current Ia Alarm 1: Ia > 310 mA

Alarm 2: Ia > 500 mA



RF connectors 7-16 DIN female

Mounting Wall mounting with 4 screws (8mm max.)Mast mounting with optional clamp set.

Weight 11 lb (5 kg)

Dimensions 10.9 x 6.5 x 3.1 inches(278 x 166 x 77.5 mm)



Test conditions for the IP67 rating: submerge depth: 1 m; submerge time: 24 hours

BTS 0 BTS 1

Ant 1Ant 0

DTMA

10934-A936.2937/b



Mounting Options:

Model Description





782 10401Dual Tower Mount Amplifier

PCS/PCS/24 dB


BTS ANT

15.9 inches(405 mm)

6.8 inches(172 mm)

3.9 inches(99 mm)



DualTower Mount Amp

782 10404

10753-D936.2939/c


Operating temperature range -40 – +65°CIP rating IP 67*


EMC ETS 300 342-3

Lightning protection 5 kA, 8/20μs RF connections and AISG port

Tx Characteristics:Frequency range 1930–1990 MHz

Bandwidth 60 MHz



Intermodulation products in Rx band < -117 dBm (2 Tx carriers at +43 dBm)

Return loss >18 dB

Rx Characteristics:


Bandwidth 60 MHz

Loss in bypass mode <2.8 dB (typical)Return loss > 18 dB (DC ON)

> 15 dB (DC OFF)

Gain -40 – +65° C 24 ± 1.2 dB+22 – +28° C 24 ± 0.6 dB





• Double unit for easy use with XPol antennas• Kathrein redundancy amplifier design for improved system reliability

• By-pass mode to ensure cell operation in case of DC power down

• Built-in lightning protection• Compact size

• Suitable for antenna RET control according to AISG standard• DTMA DC supply and AISG feed via BTS 0 port for both TMAs

DC and Alarm Characteristics: Through Node BO Port only

DC supply +12V nominal (9–15V, minus grounded)without RET Typically 250 mA per TMA

Alarm management According to AISG standard 1.1

Modem characteristics According to AISG standard 1.1Data rate: 9.6 kB


Connectors RF 7-16 DIN femaleAISG connector 8-pin female, IEC 60130-9(compliance AISG 1.1) (Pin 1: +12 V DC nominal, pin 3: RS485B, pin 5: RS485A,

pin 7: DC return; other pins: Not connected)

Weight 11 lb (5 kg)



Ant 0

Ant 1

Node B0AISG andDC-Port

Nod


Test conditions for the IP67 rating: submerge depth: 1 m; submerge time: 24 hours




694–3800 MHz RF Power dividers 860 1010n Serie

694–3800 MH

For outdoor an

indoor applicatio

11051-C936.2956/b

Kathrein Scala Division RF power dividers are designed for use in a number ofprofessional applications including multi-element antenna arrays and radiating cable

systems and other cases where efficient broadband power splitting is required.

These dividers feature low insertion loss and excellent impedance match. Carefuland conservative mechanical designs assure a long service life with high reliability

and stability in even the most difficult environmental conditions.

Mounting Options:

Model Description

131 1847 Mounting Kit for 2 to 5.7 inch (50 to 145 mm) OD mast.

860 10104

860 10105

860 10105

11.3 inches(286 mm)

2.4 inches(61 mm)

11.4 inches(289 mm)

2.6 inches(65 mm)

2.1 inches(54 mm)

2.5 inches(63 mm)

860 10104

Order Information:

Model Description

860 10100 2-way RF power divider, 200 watts, N female



860 10101 2-way RF power divider, 700 watts, 7-16 DIN female



Specifications:


Impedance 50 ohms 50 ohms

Insertion loss <0.05 dB <0.05 dB

Split 860 10100 2-way 860 10101 2-way860 10102 3-way 860 10103 3-way

860 10104 4-way 860 10105 4-wayVSWR <1.3:1 (694–894 MHz) <1.3:1 (694–894 MHz)

<1.15:1 (790–3800 MHz) <1.15:1 (790–3800 MHz)

Maximum input power 200 watts (at 50°C) 700 watts (at 50°C) )

Connector N female 7-16 DIN female

Intermodulation (2x20w) IM3: <-150 dBc IM3: <-150 dBc

Temperature range -55°C to +60°C -55°C to +60°C

Weight (max.) 1.7 lb (0.78 kg) 2.1 lb (0.96 kg)

Dimensions (maximum) 11.4 x 2.5 x 2.1 inches 11.3 x 2.6 x 2.4 inches(289 x 63 x 54 mm) (286 x 65 x 61 mm)

Shipping dimensions 11.8 x 3 x 3 inches 11.8 x 3 x 3 inches(300 x 75 x 75 mm) (300 x 75 x 75 mm)

Shipping weight 2.7 lb (1.2 kg) 2.9 lb (1.3 kg)



790–960 MHz RF Power dividers

• Equal power splits. Available with 6, 8, 10, or 12-way splits.

• Special mounting arrangements for alternate mast sizes, etc.

Please contact Kathrein-Scala sales engineering for information andpricing on RF power dividers designed for your specific requirements.

PDL Series

* Note: Dimensions shown do notinclude connectors.

790–960 MHz

Specifications: PDL2-55 PDL3-333 PDL4-2222

Frequency range 790-960 MHz 790-960 MHz 790-960 MHz


Insertion loss <0.5 dB <0.5 dB <0.5 dBSplit 50%/50% 33.3%/33.3%/33.3% 25%/25%/25%/25%

VSWR <1.2:1 <1.2:1 <1.2:1

Maximum input power 100 watts 100 watts 100 watts


Weight 2 lb (0.9 kg) 2 lb (0.9 kg) 2.25 lb (1 kg)

Dimensions* 5.6 x 4.6 x 3.25 inches 5.6 x 4.6 x 3.25 inches 5.6 x 4.6 x 3.25 inches(142 x 117 x 83 mm) (142 x 135 x 83 mm) (142 x 150 x 83 mm)

Special orders withuneven power splits.

PDL3-333

Order Information:

Model Description

PDL2-55 RF power divider for outdoor & indoor



Mounting Options:

Description

Included for masts of 1.25 to 2.375 inch (32 to 60 mm) OD.

3.25 inches(83 mm)

5.6 inches(142 mm)

4. 6 i n c h

e s

( 1 1 7 m

m )

For outdoor andindoor applications.



Continuously Adjustable RF Indoor Power Tap

790–960 MHz1710–2500 MH

Indoor Power TaContinuously Adjus

K63236001, 860 10

10827-C

936.3914936.2261/b

Order Information:

Model Description

K63236001 Adjustable indoor power tap

860 10023 Adjustable indoor power tap

Specifications: K63236001 860 10023

Frequency range 790–960 MHz 870–960 MHz1710–2170 MHz 1710–2500 MHz

Power split ratio -5 dB to -15 dB -5 dB to -15 dBcontinuously adjustable (75%/25% to 97%/3%) (75%/25% to 97%/3%)



Insertion loss <0.1 dB <0.1 dB

VSWR <2.1:1 (790–824 MHz)

<1.7:1 (824–960 MHz) <1.7:1 (870–960 MHz)<1.7:1 (1710–2170 MHz) <1.7:1 (1710–2500 MHz)

Maximum input power 100 watts (at 50°C) 100 watts (at 50°C)

Connector N female N female

Environmental conditions IP 52 IP 52

Weight 1.1 lb (0.5 kg) 1.1 lb (0.5 kg)

Dimensions* 9.3 x 3.9 x 1 inches 10.4 x 3.9 x 1 inches(235 x 100 x 25 mm) (263 x 100 x 25 mm)

Shipping dimensions 9.8 x 4.4 x 4 inches 10.9 x 4.4 x 1.6 inches(249 x 111 x 40 mm) (277 x 111 x 40 mm)

Shipping weight 1.5 lb (0.68 kg) 1.5 lb (0.68 kg)

* Excludes connectors.

● DC transmission only between input and port P1.

P2 is coupled capacitively.

P1Output

P2Output

P input

Adjust tap todesired split ratio ↔

Splitting table:

P2:P

1[dB] P

1:P

input[dB] P

2:P

input[dB]

-5 -1.2 (75%) -6.2 (25%)

-10 -0.4 (91%) -10.4 (9%)

-15 -0.1 (97%) -15.1 (3%)

↔ ↔ ↔ ↔ ↔ ↔



Scale Power Split

(dB) Ratio (x:1) P1 (%) P2 (%) P1 (dB) P2 (dB)

-5.00 . . . . . . . . .3.2 . . . . . . . . 76.0% . . . . . . . .24.0% . . . . . . . . -1.2 . . . . . . . . . -6.2

-5.25 . . . . . . . . .3.3 . . . . . . . . 77.0% . . . . . . . .23.0% . . . . . . . . -1.1 . . . . . . . . . -6.4

-5.50 . . . . . . . . .3.5 . . . . . . . . 78.0% . . . . . . . .22.0% . . . . . . . . -1.1 . . . . . . . . . -6.6

-5.75 . . . . . . . . .3.8 . . . . . . . . 79.0% . . . . . . . .21.0% . . . . . . . . -1.0 . . . . . . . . . -6.8

-6.00 . . . . . . . . .4.0 . . . . . . . . 79.9% . . . . . . . .20.1% . . . . . . . . -1.0 . . . . . . . . . -7.0

-6.25 . . . . . . . . .4.2 . . . . . . . . 80.8% . . . . . . . .19.2% . . . . . . . . -0.9 . . . . . . . . . -7.2

-6.50 . . . . . . . . .4.5 . . . . . . . . 81.7% . . . . . . . .18.3% . . . . . . . . -0.9 . . . . . . . . . -7.4

-6.75 . . . . . . . . .4.7 . . . . . . . . 82.6% . . . . . . . .17.4% . . . . . . . . -0.8 . . . . . . . . . -7.6

-7.00 . . . . . . . . .5.0 . . . . . . . . 83.4% . . . . . . . .16.6% . . . . . . . . -0.8 . . . . . . . . . -7.8

-7.2 5 . . . . . . . . .5.3 . . . . . . . . 84.1% . . . . . . . .15.9% . . . . . . . . -0.7 . . . . . . . . . -8.0

-7.50 . . . . . . . . .5.6 . . . . . . . . 84.9% . . . . . . . .15.1% . . . . . . . . -0.7 . . . . . . . . . -8.2

-7.75 . . . . . . . . .6.0 . . . . . . . . 85.6% . . . . . . . .14.4% . . . . . . . . -0.7 . . . . . . . . . -8.4

-8.00 . . . . . . . . .6.3 . . . . . . . . 86.3% . . . . . . . .13.7% . . . . . . . . -0.6 . . . . . . . . . -8.6-8.25 . . . . . . . . .6.7 . . . . . . . . 87.0% . . . . . . . .13.0% . . . . . . . . -0.6 . . . . . . . . . -8.9

-8.50 . . . . . . . . .7.1 . . . . . . . . 87.6% . . . . . . . .12.4% . . . . . . . . -0.6 . . . . . . . . . -9.1

-8.7 5 . . . . . . . . .7.5 . . . . . . . . 88.2% . . . . . . . . 11.8% . . . . . . . . -0.5 . . . . . . . . . -9.3

-9.00 . . . . . . . . .7.9 . . . . . . . . 88.8% . . . . . . . . 11.2% . . . . . . . . -0.5 . . . . . . . . . -9.5

-9.25 . . . . . . . . .8.4 . . . . . . . . 89.4% . . . . . . . .10.6% . . . . . . . . -0.5 . . . . . . . . . -9.7

-9.50 . . . . . . . . .8.9 . . . . . . . . 89.9% . . . . . . . .10.1% . . . . . . . . -0.5 . . . . . . . . -10.0

-9.75 . . . . . . . . .9.4 . . . . . . . . 90.4% . . . . . . . . .9.6% . . . . . . . . -0.4 . . . . . . . . -10.2

-10.00 . . . . . . . .10.0 . . . . . . . . 90.9% . . . . . . . . .9.1% . . . . . . . . -0.4 . . . . . . . . -10.4

-10.25 . . . . . . . .10.6 . . . . . . . . 91.4% . . . . . . . . .8.6% . . . . . . . . -0.4 . . . . . . . . -10.6

-10.50 . . . . . . . . 11.2 . . . . . . . . 91.8% . . . . . . . . .8.2% . . . . . . . . -0.4 . . . . . . . . -10.9

-10.75 . . . . . . . . 11.9 . . . . . . . . 92.2% . . . . . . . . .7.8% . . . . . . . . -0.4 . . . . . . . . -11.1-11.00 . . . . . . . .12.6 . . . . . . . . 92.6% . . . . . . . . .7.4% . . . . . . . . -0.3 . . . . . . . . -11.3

-11.25 . . . . . . . .13.3 . . . . . . . . 93.0% . . . . . . . . .7.0% . . . . . . . . -0.3 . . . . . . . . -11.6

-11.50 . . . . . . . .14.1 . . . . . . . . 93.4% . . . . . . . . .6.6% . . . . . . . . -0.3 . . . . . . . . -11.8

-11.75 . . . . . . . .15.0 . . . . . . . . 93.7% . . . . . . . . .6.3% . . . . . . . . -0.3 . . . . . . . . -12.0

-12.00 . . . . . . . .15.8 . . . . . . . . 94.1% . . . . . . . . .5.9% . . . . . . . . -0.3 . . . . . . . . -12.3

-12.25 . . . . . . . .16.8 . . . . . . . . 94.4% . . . . . . . . .5.6% . . . . . . . . -0.3 . . . . . . . . -12.5

-12.50 . . . . . . . .17.8 . . . . . . . . 94.7% . . . . . . . . .5.3% . . . . . . . . -0.2 . . . . . . . . -12.7

-12.75 . . . . . . . .18.8 . . . . . . . . 95.0% . . . . . . . . .5.0% . . . . . . . . -0.2 . . . . . . . . -13.0

-13.00 . . . . . . . .20.0 . . . . . . . . 95.2% . . . . . . . . .4.8% . . . . . . . . -0.2 . . . . . . . . -13.2

-13.25 . . . . . . . .21.1 . . . . . . . . 95.5% . . . . . . . . .4.5% . . . . . . . . -0.2 . . . . . . . . -13.5

-13.50 . . . . . . . .22.4 . . . . . . . . 95.7% . . . . . . . . .4.3% . . . . . . . . -0.2 . . . . . . . . -13.7

-13.75 . . . . . . . .23.7 . . . . . . . . 96.0% . . . . . . . . .4.0% . . . . . . . . -0.2 . . . . . . . . -13.9

-14.00 . . . . . . . .25.1 . . . . . . . . 96.2% . . . . . . . . .3.8% . . . . . . . . -0.2 . . . . . . . . -14.2

-14.25 . . . . . . . .26.6 . . . . . . . . 96.4% . . . . . . . . .3.6% . . . . . . . . -0.2 . . . . . . . . -14.4

-14.50 . . . . . . . .28.2 . . . . . . . . 96.6% . . . . . . . . .3.4% . . . . . . . . -0.2 . . . . . . . . -14.7

-14.75 . . . . . . . .29.9 . . . . . . . . 96.8% . . . . . . . . .3.2% . . . . . . . . -0.1 . . . . . . . . -14.9

-15.00 . . . . . . . .31.6 . . . . . . . . 96.9% . . . . . . . . .3.1% . . . . . . . . -0.1 . . . . . . . . -15.1

Continuously Adjustable RF Indoor Power Tap63236001, 860 10023



11246-A936.3575/a

694–2700 MHz RF Indoor Power Tap

694–2700 MH

RF Power Tap

For Indoor Applicat

860 10136, 860 10137, 860 10

Mounting Options:

Description

None needed

For indoor use only.



Impedance 50 ohms


Insertion loss <0.05 dB

VSWR 694–790 MHz <2.0:1790–2500 MHz <1.5:12500–2700 MHz <2.0:1


Connector N female



Shipping dimensions 10.5 x 4.4 x 3.7 inches(267 x 111 x 95 mm


Mounting None needed

Environmental conditions IP 52

● DC transmission only between input and port P1.

P2

is coupled capacitively.

9.6 inches(244 mm)

2.5 inch(64 mm)

1 inch(25 mm)

P1

P2=P1-(6dB)Capacitive coupled to input

Order Information:

Model Description

860 10136 Indoor power tap



Specifications: 860 10136 860 10137 860 10138

Tap lossInput↔ P

1-1.0 dB

-0.4 dB

-0.1 dB

Input↔ P2

-7.0 dB

-10.4 dB

-15.1 dB

NE W



10819-B936.2248/b

Specifications:


Impedance 50 ohms

Insertion loss <0.05 dB

Power split ratio860-10017 50%/50%860-10018 33.3%/33.3%/33.3%860-10019 25%/25%/25%/25%

VSWR 694–864 MHz 790–2500 MHz 2500–2700MHz860-10017 <1.5:1 <1.25:1 <2.0:1860-10018 <1.5:1 <1.25:1 <2.0:1860-10019 <1.5:1 <1.3:1 <2.0:1


Maximum input power 100 watts

Connector N female

DC capability DC transmission between all terminations(suitable for remote power supply systems)

Environmental conditions IP 52


Dimensions 8 x 2.5 x 1.6 inches (maximum)(204 x 63 x 41 mm)

Shipping dimensions 9.5 x 4.3 x 3.7 inches (maximum)(242 x 110 x 95 mm)

Mounting For indoor use only. Mounting hardware is notincluded.Kathrein-Scala recommends the use of nylon tiestraps for mounting.

Order Information:

Model Description

860 10017 2-way power divider for indoor use only



860-10019

8 inches(204 mm)

1 inch(25 mm)

1 inch(25 mm)

Mounting Options:

Description


Mounting hardware is not included.

Kathrein-Scala recommends the use of nylon tie straps for mounting.

694–2700 MHz RF Indoor Power Divider

694–2700 MHz

RF Power Divider

or Indoor Applications

60 10017, 860 10018, 860 10019

860 10019



• Designed for co-siting purposes.

• Enables feeder sharing.

• Can be used as a combiner near the BTS or in a reciprocal

function near the antenna.

• Suitable for indoor or outdoor applications.

• Wall or mast mounting.

• Available as a single unit or a double unit for X-Pol antennas.

• Built-in lightning protection.

• DC stop available as an accessory.

• Extremely low insertion loss.

• High input power.

Mounting Options:

Model Description

2 x 131 1847 Mounting Kit (optional) for 2 to 5.7 inch(50 to 145 mm) OD mast.

Mounts to a flat surface with four screws (max. 8 mm dia).

Mounts to 2 to 5.7 inch (50 to 145 mm) OD masts with optional mounting kit.


380–960 MHz

1710–2700 MH

Dualband Combiner

11245-A936.3749

782 10680, 782 1068

782 10681, 782 1068

782 10680, 782 10682

Single Unit

782 10681, 782 10683

Double Unit

Specifications: 782 10680 Single Unit 782 10682 Single Unit

782 10681 Double Unit 782 10683 Double Unit

Pass bandBand 1 380–960 MHz 380–960 MHzBand 2 1710–2700 MHz 1710–2700 MHz


VSWR < 1.2:1 (380–960 / 1710–2700) < 1.2:1 (380–960 / 1710–2700)

Insertion lossPort 1↔Port 3 <0.1 dB (380–960 MHz) <0.1 dB (380–960 MHz)Port 2↔Port 3 <0.1 dB (1710–2700 MHz) <0.1 dB (1710–2700 MHz)

Isolation

Port 1↔Port 2 > 55 dB (380–550 MHz) > 55 dB (380–550 MHz)> 65 dB (550–960 MHz) > 65 dB (550–960 MHz)> 65 dB (1710–2700 MHz) > 65 dB (1710–2700 MHz)

Input powerBand 1 / Band 2 < 700 watts / <700 watts < 700 watts / < 700 watts

Intermodulation < 160 dBc (3rd order; with 2 x 20 W) < 160 dBc (3rd order; with 2 x 20 W)

Operating temperature -55° to +60° C -55° to +60° C

Connector 7-16 DIN female (long neck) 7-16 DIN female (long neck)

Application Indoor or outdoor (IP 66) Indoor or outdoor (IP 66)

DCAISG transparencyPort 1↔Port 3 By-pass (2500 mA maximum) StopPort 2↔Port 3 By-pass (2500 mA maximum) By-pass (2500 mA maximum)

Lightning protection 3 kA, 10/350 μs pulse 3 kA, 10/350 μs pulse

WeightSingle unit 4.9 lb (2.2 kg) 4.9 lb (2.2 kg)

Double unit 9.5 lb (4.3 kg) 9.5 lb (4.3 kg)Dimensions

Single unit 9.6 x 5 x 2.1 inches (318 x 122 x 67 mm) 9.6 x 5 x 2.1 inches (318 x 122 x 67 mm)Double unit 9.6 x 5 x 4.3 inches (318 x 122 x 118 mm) 9.6 x 5 x 4.3 inches (318 x 122 x 118 mm)

Shipping dimensionsSingle unit 14.4 x 8.1 x 5.9 inches (365 x 207 x 150 mm) 14.4 x 8.1 x 5.9 inches (365 x 207 x 150 mm)Double unit 14.4 x 8.1 x 8.4 inches (365 x 207 x 214 mm) 14.4 x 8.1 x 8.4 inches (365 x 207 x 214 mm)

380 – 960 1710 – 2700 3800 – 960 1710 – 1700

NE W



782 10680, 782 10662 Dualband Combiner

782 10681, 782 10683

4 screws M5 x 12

4.6 inches(118 mm)

2.6 inches(67 mm)

4.8 inches(122 mm)

10.7 inches(271 mm)

1.6 inches(41 mm)

1.9 inches(49 mm)

3.6 inches(91 mm)

1.6 inches(41 mm)

1.4 inches(35 mm)

4 inches(102 mm)

11.3 inches

(288 mm)12.5 inches(318 mm)

1.9 inches(49 mm)

8.3 inches(210 mm)

6.9 inches(176 mm)

2.5 inches(64 mm)

Typical Attenuation Curves

Diagram II

Port 1 Port 3 Port 2 Port 3

Diagram I


Order Information:

Model Description

782 10680 Single Dualband combiner - By-pass / By-pass

782 10681 Double Dualband combiner - By-pass / By-pass

782 10682 Single Dualband combiner - Stop / By-pass

782 10683 Double Dualband combiner - Stop / By-pass



• Designed for cable sharing/reduction in PCS and WiMAX®

systems.

• Can be used as a combiner near the BTS or in a reciprocal function

near the antenna.




• External DC stop available as an accessory.

• Available as a single unit, or for XPol anten-nas as a double unit

• Very low insertion loss.

Mounting Options:

Model Description





470–960 MHz

1710–2700 MH

Dualband Combiner

11244-A936.3891

782 10660, 782 10662, 782 106

782 10661, 782 10663, 782 106

782 10660, 782 10662, 782 106

Single Unit

782 10661, 782 10663, 782 106

Double Unit

Specifications:

Pass bandBand 1 470–960 MHzBand 2 1710–2700 MHz

Impedance 50 ohms

VSWR < 1.2:1 (470–960 / 1710–2700)

Insertion lossPort 1↔Port 3 <0.15 dB (470–960 MHz) (0.1 dB typical)Port 2↔Port 3 <0.2 dB (1710–2700 MHz) (0.1 dB typical)

IsolationPort 1↔Port 2 > 55 dB (470–960 MHz)

> 65 dB (1710–2700 MHz)Input power

Band 1 / Band 2 < 650 watts / < 350 watts

Intermodulation < 160 dBc (3rd order; with 2 x 20 W)


Connector 7-16 DIN female (long neck)

Application Indoor or outdoor (IP 66)

DCAISG transparency 782 10660 Single Unit 782 10662 Single Unit 782 10664 Single Unit

782 10661 Double Unit 782 10663 Double Unit 782 10665 Double Unit

Port 1↔Port 3 By-pass (2500 mA maximum) Stop By-pass (2500 mA maximum)Port 2↔Port 3 By-pass (2500 mA maximum) By-pass (2500 mA maximum) Stop


WeightSingle unit 2.6 lb (1.2 kgDouble unit 5.3 lb (2.4 kg)

Dimensions without connectors or mounting bracketsSingle unit 5.7 x 5 x 1.5 inches (145 x 126 x 38 mm)Double unit 5.7 x 5 x 3.7 inches (145 x 126 x 93 mm)

Shipping dimensionsSingle unit 11.2 x 6.2 x 3.7 inches (285 x 157 x 93 mm)Double unit 11,2 x 6.2 x 5.8 inches (285 x 157 x 148 mm)

470 – 960 1710 – 2700470 – 960 1710 – 2700 470 – 960 1710 – 2700

NE W



782 10660, 782 10662, 782 10664 Dualband Combiner

782 10661, 782 10663, 782 10665

Order Information:

Model Description

782 10660 Single Dualband combiner - By-pass / By-pass

782 10661 Double Dualband combiner - By-pass / By-pass

782 10662 Single Dualband combiner - Stop / By-pass

782 10663 Double Dualband combiner - Stop / By-pass

782 10664 Single Dualband combiner - By-pass / Stop

782 10665 Double Dualband combiner - By-pass / Stop

0

-10

-20

-30

-40

-50

-60

-70

-80

-90

-100

A t t e n u a t i o n / d B

Frequency/MHz

1710 – 2700

0 300 600 900 1200 1500 1800 2100 2400 2700 3000

470 – 960

0

-0.1

-0.2

-0.3

-0.4

-0.5

-0.6

-0.7

-0.8

-0.9

-1.00 300 600 900 1200 1500 1800 2100 2400 2700 3000


Frequency/MHz

1710 – 2700470 – 960


Diagram II


Diagram I


Side viewSingle Unit

Top viewSingle Unit,Double Unit

Side viewDouble Unit

3.7 inches(93 mm)

2.1 inches(53 mm)

5 inches(126 mm)

8.1 inches(206 mm)

5.7 inches(145 mm)

1.4 inches(35 mm)

1.5 inches(38 mm)

2.2 inches(55 mm)

0.8 inches(21 mm)

1.4 inches(35 mm)

4.6 inches(40 mm)

2.4 inches(60 mm)

8.8 inches(224 mm)

9.6 inches(244 mm)



• Designed for co-siting purposes.

• Enables feeder sharing.

• Suitable for indoor or outdoor applications (IP 66).

• DC pass through between all ports.

• External DC Stop available as an accessory.

782 10809

Single unit

782 10809, 782 108

Order Information:

Model Description

782 10809 Dualband combiner, single unit

782 10810 Dualband combiner, double unit

Mounting Options:

Model Description




1850–1910/1930–19901710–1755/2110–2155

Dualband Combiner

11069-A936.3344

Specifications:

Pass band

PCS 1850–1910 (Rx) / 1930–1990 (Tx) MHzAWS 1710–1755 (Rx) / 2110–2155 (Tx) MHz

Impedance 50 ohms

VSWR < 1.25:1 (1850–1910 / 1930–1990 MHz)< 1.25:1 (1710–1755 / 2110–2155 MHz)

Insertion lossPort PCS↔Port ANT <0.3 dB (1850–1910 / 1930–1990 MHz)Port AWS↔Port ANT <0.2 dB (1710–1755 / 2110–2155 MHz)

InsolationPort PCS↔Port AWS > 50 dB (1850–1910 / 1930–1990 MHz)

> 50 dB (1710–1755 / 2110–2155 MHz)

Input powerPort PCS < 250 watts (1850–1910 / 1930–1990 MHz)Port AWS < 250 watts (1710–1755 / 2110–2155 MHz)

Intermodulation < -160 dBc (3rd order; with 2 x 20 W)


Connectors 7-16 DIN female (long neck)Application Indoor or outdoor (IP 66)

Lightning protection 3 kA, 10/350 μs

DC/AISG transparency By-pass between all ports (max. 2500 mA)

Weight single unit 5.5 lb (2.5 kg)double unit 11 lb (5 kg)

Dimensions single unit 11.7 x 4.8 x 2.5 inches (296 x 122 x 64 mm)double unit 11.7 x 4.8 x 4.7 inches (296 x 122 x 120 mm)

(includes mounting bracket)

Port PCS Port ANT

0

-0.1

-0.2

-0.3

-0.4

-0.5

-0.6

-0.7

-0.8

-0.9

-1.0


Frequency/MHz1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200

2110 – 2155

1850 – 1910

1930 – 1990

1710 – 1755

0

-10

-20

-30

-40

-50

-60

-70

-80

-90

-100


Frequency/MHz

1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200

2110 – 2155

1850 – 1910

1930 – 19901710 – 1755


Port AWS Port ANT

Diagram IDiagram II

Port PortPCS ANT

Port PortAWS ANT

Port PortAWS ANT




The mounting plates can be removed andreplaced with other means of mounting byremoving the screws through (M5 x 10).

Caution: Exceeding the maximum drilleddepth of 8.5 mm with replacementhardware and fasteners may permanentlydamage the unit.

4 screws M5 x 104 spring washers 5.5 DIN 6095


4.7 inches(120 mm)

2.5 inches(64 mm)

4.8 inches(122 mm)

11.7 inches(296 mm)

Accessories:

Model Description

793 301 DC Stop




The mounting plates can be removed and

replaced with other means of mounting byremoving the screws through (M5 x 10).

Caution: Exceeding the maximum drilleddepth of 8.5 mm with replacementhardware and fasteners may permanentlydamage the unit.


4 screws M5x 104 spring washers 5.5 DIN 6095

4.7 inches(120 mm)

2.5 inches(64 mm)

4.8 inches(122 mm)

11.7 inches(296 mm)

Port PCS Port ANT0

-0.1

-0.2

-0.3

-0.4

-0.5

-0.6

-0.7

-0.8

-0.9

-1.0

A t t e n u a t i o n / d

B

Frequency/MHz1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200

2110 – 2155

1850 – 1910

1930 – 1990

1710 – 1755

0

-10

-20

-30

-40

-50

-60

-70

-80

-90

-100


Frequency/MHz

1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200

2110 – 2155

1850 – 1910

1930 – 19901710 – 1755


Port AWS Port ANT

Diagram IDiagram II

Port PortPCS ANT

Port PortAWS ANT

Port PortAWS ANT



• Designed for cable sharing/reduction in PCS and WiMAX®

systems.

• Can be used as a combiner near the BTS or in a reciprocal function

near the antenna.




• External DC stop available as an accessory.

• Available as a single unit, or for XPol anten-nas as a double unit

• Very low insertion loss.

Mounting Options:

Model Description





1710–2180 MH

2400–2700 MH

Dualband Combiner

11344-B936.3367/b

782 10800, 782 11092, 782 11

782 11091, 782 11093, 782 11


Pass bandBand 1 1710–2180 MHzBand 2 2400–2700 MHz

Impedance 50 ohms

VSWR < 1.25:1 (1710–2180 / 2400–2700 MHz)

Insertion lossPort 1↔Port 3 <0.15 dBPort 2↔Port 3 <0.15 dB

InsolationPort 1↔Port 2 > 60 dB

Input power, bands 1 & 2 < 300 watts

Intermodulation < -160 dBc (3rd order; with 2 x 20 W)


Connectors 7-16 DIN female (long neck)


Lightning protection 3 kA 10/350 μs pulse

Weight single unit 6.4 lb (2.9 kg)double unit 12.6 lb (5.7 kg)

Dimensions single unit 12 x 7.8 x 2.5 inches (305 x 199 x 63 mm)double unit 12 x 7.8 x 4.4 inches (305 x 199 x 113 mm)

Shipping dimensionssingle unit 15.4 x 10.7 x 5.5 inches (392 x 272 x 139 mm)double unit 15.4 x 10.7 x 7.4 inches (392 x 272 x 189 mm)

1710 – 2180 2400 – 2700

Specifications: 782 10800 Single Unit 782 11092 Single Unit 782 11094 Single Unit782 11091 Double Unit 782 11093 Double Unit 782 11095 Double Unitt

DC/AISG transparencyPort 1↔Port 3 By-pass (max. 2500mA) Stop By-pass (max. 2500mA)Port 2↔Port 3 By-pass (max. 2500mA) By-pass (max. 2500mA) Stop

1710 – 2180 2400 – 2700 1710 – 2180 2400 – 2700

782 10800, 782 11092, 782 11

Single Unit

782 11091, 782 11093, 782 11

Double Unit

NE W



782 10800, 782 11092, 782 11094 Dualband Combiner

782 11091, 782 11093, 782 11095

2.4 inches

(62 mm)

12 inches(305 mm)

4.4 inches

(113 mm)

7.8 inches

(199 mm)


Diagram I

port 1 port 3 port 2 port 3

Diagram II

port 1 port 3 port 2 port 3



Hybrid Combiner 782 10504

698–2690 MH● Designed for the decoupled combining of two transmitter or receiversignals onto one common antenna.

● The frequency spacing between transmitter signals can be as small asrequired.

● Excellent intermodulation performance.

● Suitable for indoor or outdoor applications.

● Wall or mast mounting.

●

DC by-pass between port 1 and port 3.

11358-A

936.3737

Mounting Options:

Description

Mounts to a flat surface with 4 screws (max. 8 mm diameter)

Optional mounting Kit for 2 to 5.7 inch (50 to 145 mm) OD mast

is available.

Specifications:


Impedance 50 ohms

VSWR (all ports) < 1.2:1 (698–2170 MHz)< 1.25:1 (2170–2690 MHz)

AttenuationPort 1↔ Port 3 3.1±0.5 dBPort 2↔ Port 3 3.1±0.5 dBPort 1↔ Port 2 >23 dB*


Input powerPort 1 < 60 wattsPort 2 < 60 watts

Temperature range -40° to +55° C

Connectors 7-16 DIN female (long neck)

DC/AISG transparencyPort 1↔ Port 3 By-pass (max. 2500 mA)Port 2↔ Port 3 Stop





* Valid if all ports are terminated with 50 ohm loads

Max. input power per port

+55 °C 55 W 60 W

+40 °C 70 W 75 W

+25 °C 80 W 85 W

Max. ambienttemperature

Mounted horizontally Mounted vertically

Note: The input power rating of 60 W per port is specified at anambient temperature of +55 °C with the combiner mountedvertically, without additional cooling, and while respecting thesafety standard EN IEC 60950 (max. surface temperature+90 °C). If used at a lower ambient temperature, then ahigher input power in accordance with the following table ispossible:

NE W



782 10504 Hybrid Combiner

10.9 inches

(276 mm)

10.4 inches

(264 mm)

3.3 inches(84 mm)



Hybrid Combiner

Specifications:


Impedance 50 ohms

VSWR < 1.11:1

AttenuationInput 1↔Antenna port 3±0.4 dBInput 2↔Antenna port 3±0.4 dB

AttenuationInput 1↔Input 2 See Diagram


Input power < 150 watts total per input max. (300 watts total)16 transmitter signals at each input

Operating temperature 0° to +50° C

Connector 7-16 DIN female (silver-plated)



Special features Tx1 → Antenna PortTx2 → Short (ground)

Note: VSWR and attenuation aremeasured when the remaining ports areterminated with 50 ohm loads.

792 699

806–960 MHzThe hybrid combiner with cable absorber is suitable for combining 2 transmitters or 2 transmittergroups (transmitter combiners) to one common antenna while achieving very low intermodulation.

The frequency spacing between the transmitting frequencies can be as narrow as required. For

technical reasons half the signal power (3 dB) is dissipated by the cable absorber.

Design and Construction: The hybrid combiner with cable absorber consists of a 3 dB couplerand a 10 watt load with an inserted 20 dB attenuation cable.

Function: The 20 dB attenuation cable causes the transmission signals to be highly attenuated

before they reach the load. Thus only intermodulation products of a very low level can be

generated at the load, which are further reduced by 20 dB in the attenuation cable on the returnpath to the antenna output.

10654-A

Mounting Options:

Description

Mounts to a flat surface using four screws and spacers, or 19inch rack mounting (2 height units necessary)



Dimension Inches mm

A 17.5 444

B 16.6 421

C 0.5 11.5

D 3.7 94

E 5.6 143

F 1.2 30

G 1.9 47

H 5.2 132

I 6.5 164

J 12.4 316

K 13.2 336

L ∅ 0.3 ∅ 7

M 0.2 5

N 0.4 10

O 2.3 58.5

P 0.2 4

Q 11.8 300

R 1 24.5

S 0.7 18

T 2 max 51 max

ABC

D

E

F

J

K

G

H

I

L

M N

O

P

Q

R

S

T

792 699 Hybrid Combiner



Hybrid Combiner

Specifications: 782 10500

Frequency range 806–960 MHzImpedance 50 ohms

VSWR (all ports) < 1.15:1



Input powerPort 1 < 60 wattsPort 2 < 60 watts





(260 x 135 x 90 mm)Mounting Mounts to a flat surface using four screws

(max. 6 mm diameter)

Optional mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast is available.

782 10500, 782 105

806–960 MHzor

1710–2170 MH

11067-FRO936.A2472

Mounting Options:

Description



● Designed for the decoupled combining of two transmitter or receiver

signals onto one common antenna.

● The frequency spacing between transmitter signals can be as small

as required.

● Excellent intermodulation performance.

● Suitable for indoor or outdoor applications.

Port 3Antenna

Tx1/Tx2/Rx1/Rx2

Port 1Tx1/Rx1

Port 2Tx2/Rx2

Hybrid Combiner

Port 1

Port 2

P



Impedance 50 ohms

VSWR (all ports) < 1.25:1


Intermodulation (2x20w) IM3: <-160 dBcInput power

Port 1 < 60 wattsPort 2 < 60 watts





Mounting Mounts to a flat surface using four screws(max. 6 mm diameter)

Optional mounting Kit for 2 to 5.7 inch(50 to 145 mm) OD mast is available.

* Valid if all ports are terminated with 50 ohm loads

Order Information:

Model Description

782 10500 Hybrid combiner (806–960 MHz)

782 10502 Hybrid combiner (1710–2170 MHz)

11066-FRO936.A2471



860 10142

1575.42 MHzL1-signal

11205-A936.3545

Specifications:

Frequency range 1575.42 MHz, L1-signal

Gain 25 ± 2 dB

Noise figure <2.0 dB

VSWR <1.8:1

Operation voltage 3.0–5.5 V, ripple <50 mVsupplied at inner conductorRF-output

Operation current <25 mA

Connectors TNC female (input)N female (output)


The Kathrein 860 10142 low noise amplifier is designed for use with train antennaswith GPS. It includes a preselection filter to prevent interference in case of

simultaneous operation in the 380–960 MHz / 1710–3800 MHz and GPS frequencyranges. The amplifier fulfills the requirements according to EN 50155.

Additional features:

● The maximum input power at the input of the amplifier at the frequency range

380–960 MHz and 1710–3800 MHz is limited to +25 dBm.

● The noise level at the GPS frequency generated by the operation at the

frequency range 380–960 MHz and 1710–3800 MHz should not exceed thethermal noise level at the input of the GPS amplifier, otherwise the noise figure

will be increased.

Environmental conditions:

● Temperature range: –25 °C – +55 °C (data as specified)

–40 °C – +85 °C (extended range)*

● Protection class: IP54 (DIN 40050 / IEC 144)(hanging installation position)

*Extended range of operation: Within an extended temperature range of –40 °C

– +85 °C and an extended supplied voltage range of 3.2 V– 6.0 V operation ispossible with the following restrictions:

Noise figure: < 2.5 dB

Gain: > 20 dB

Mounting Options:

Description

Mount using 4 holes, 4.5 mm diameter

Low Noise GPS Amplifier

InputTNC female

OutputN female

bias-Tbandpassfilter GPS

bandpassfilter GPS

bandpassfilter GPS

amplifier amplifierlowpass

Block Diagram

Input (Antenna)

TNC

Output

(DC +3.0 ... 5.5 V)

N

2.1 inches(53 mm)

3.7 inches(93 mm)

1.2 inches(50 mm)

2.8 inches(70 mm)

0.9 inches(22 mm)



824–896 MHz

Indoor Use

782 10215782 10257782 10265

782 10216

The duplexer is designed to combine/split AMPS Tx and Rxsignals to/from one common Tx/Rx antenna in order to save

feeder cable and antenna costs

● Suitable for indoor use.

● Built-in DC stop.

9 inches(229 mm)

3.1 inches(80 mm)

6.9 inches

(175 mm)

6.7 inches(80 mm)

3.1 inches(80 mm)

4.4 inches(112 mm)

or

Specifications: 782 10215 782 10216 782 10257 782 10265

Frequency rangeLow band 824–851 MHz 824–851 MHz 824–846.5 MHz 824–846.5 MHzHigh band 869–896 MHz 869–896 MHz 869–891.5 MHz 869–891.5 MHz

Impedance 50 ohms 50 ohms 50 ohms 50 ohmsVSWR <1.25:1 <1.25:1 <1.25:1 <1.25:1

Insertion lossAntenna→ Low band <0.5 dB <0.5 dB <0.5 dB <0.5 dBHigh band→Antenna <0.5 dB <0.5 dB <0.5 dB <0.5 dB

IsolationLow band↔High band >65 dB >65 dB >70 dB >70 dB

Maximum input power <400 watts (high band) <400 watts (high band) <400 watts (high band) <800 watts (high band)max. 16 carriers max. 16 carriers max. 16 carriers max. 32 carriers

Intermodulation (2x20w) IM3: <-160 dBc IM3: <-160 dBc IM3: <-160 dBc IM3: <-160 dBc

Temperature range -20° to +55° C -20° to +55° C -20° to +55° C -20° to +55° C

Connectors 7-16 DIN female N female 7-16 DIN female 7-16 DIN female

Application Indoor Indoor Indoor Indoor

Dimensions* 9 x 6.7 x 3.1 inches 9 x 6.9 x 3.1 inches 9 x 6.7 x 3.1 inches 9 x 6.7 x 4.4 inches(229 x 170 x 80 mm) (229 x 175 x 80 mm) (229 x 170 x 80 mm) (229 x 170 x 112 mm)

Weight 5.7 lb (2.6 kg) 5.7 lb (2.6 kg) 5.7 lb (2.6 kg) 6.6 lb (3 kg)

Shipping dimensions 12.2 x 9.9 x 6.4 inches 12.2 x 9.9 x 6.4 inches 12.2 x 9.9 x 6.4 inches 12.2 x 9.9 x 6.4 inches(309 x 252 x 162 mm) (309 x 252 x 162 mm) (309 x 252 x 162 mm) (309 x 252 x 162 mm)

Mounting Mount using four screws Mount using four screws Mount using four screws Mount using four screws(max. 4 mm diameter) (max. 4 mm diameter). (max. 4 mm diameter) (max. 4 mm diameter)

*Includes connectors and mounting feet

782 10215, 782 10

10865-A936.2384/b

782 10257, 782 10

Mounting Options:

Description

See specifications above.

Duplexer with Built-in DC Stop



82 10215, 782 10216

82 10257, 782 10265




10849-B936.2284/c

General specifications: 782 10168, 782 10169, 782 10170 782 10171, 782 10172

Frequency rangeLow band 824–835 MHz 835–851 MHzHigh band 869–880 MHz 880–896 MHz


VSWR <1.25:1 <1.25:1

Insertion lossAntenna→ Low band <0.5 dB <0.5 dB

High band→Antenna <0.5 dB <0.5 dBIsolation

Low band↔High band >85 dB >85 dB

Maximum input power <400 watts (high band) <400 watts (high band)max. 8 carriers max. 12 carriers


Connectors 7-16 DIN female 7-16 DIN female

782 10168

782 10171

782 10169782 10172

Indoor & Outdo

Versions



Application Indoor

Dimensions 19” rack mount, 2 height units6.7 inch (170 mm) plug-in depth



Mounting Mount using four screws(max. 6 mm diameter)

782 10171, 782 10

782 10168, 782 10169, 782 10Duplexer with Built-in DC Stop

Order Information:

Model Description

782 10168 Indoor duplexer

782 10169 Outdoor duplexer

782 10170 Indoor duplexer (19” rack mount)

782 10171 Indoor duplexer

782 10172 Outdoor duplexer

782 10170

(19” drawer)

The duplexer is designed to combine/split AMPS Tx and Rx

signals to/from one common Tx/Rx antenna in order to savefeeder cable and antenna costs

It can be used:

● Indoor and outdoor versions.


● 78210168: AMPS A-Band, indoor version

● 78210169: AMPS A-Band, outdoor version

● 78210170: AMPS A-Band,indoor version mounted onto a 19˝drawer

● 78210171: AMPS B-Band, indoor version

● 78210172: AMPS B-Band, outdoor version

Specifications: 782 10168 782 10169 782 10171 782 10172

Temperature range -20° to +55° C -40° to +60° C -20° to +55° C -40° to +60° C

Application Indoor Outdoor (IP 66) Indoor Outdoor (IP 66)

Dimensions 9 x 6.7 x 3.1 inches 12 x 9.4 x 3.7 inches 9 x 6.7 x 3.1 inches 12 x 9.4 x 3.7 inches(229 x 170 x 80 mm) (305 x 238 x 94 mm) (229 x 170 x 80 mm) (305 x 238 x 94 mm)

Weight 6.2 lb (2.8 kg) 12.1 lb (5.5 kg) 6.2 lb (2.8 kg) 12.1 lb (5.5 kg)

Shipping dimensions 12.2 x 9.9 x 6.4 inches 13.7 x 11.7 x 6.8 inches 12.2 x 9.9 x 6.4 inches 13.7 x 11.7 x 6.8 inches(309 x 252 x 162 mm) (347 x 297 x 174 mm) (309 x 252 x 162 mm) (347 x 297 x 174 mm)

Mounting Mount using four screws Wall mount using four screws Mount using four screws Wall mount using four screw(max. 4 mm diameter) (max. 8 mm diameter). (max. 4 mm diameter) (max. 8 mm diameter)

Mount options for 2 to 4.6 inch Mount options for 2 to 4.6 i(50 to 115 mm) OD masts. (50 to 115 mm) OD masts.

NE W



82 10168, 782 10169, 782 10170

82 10171, 782 10172


0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

802 812 822 832 842 852 862 872 882 892 902

B d / n o i t a u n e t t A

Frequency/MHz

869 – 880824 – 835

0

10

20

30

40

50

60

70

80

90

100

802 812 822 832 842 852 862 872 882 892 902


Frequency/MHz

869 – 880824 – 835

Typical Attenuation Curves (782 10168, 782 10169, 782 10170)

Antenna Low band High band Antenna Antenna Low band High band Antenna

Diagram I Diagram II

0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

815 825 835 845 855 865 875 885 895 905 915


Frequency/MHz

880 – 896835 – 851

0

10

20

30

40

50

60

70

80

90

100

815 825 835 845 855 865 875 885 895 905 915


Frequency/MHz

835 – 851 880 – 896

Antenna Low band High band Antenna Antenna Low band High band Antenna

Diagram I Diagram II

Typical Attenuation Curves (782 10171, 782 10172)

Low band Antenna High band


HighbandAntenna


Lowband

12 inches

(305 mm)

9.4 inches(238 mm)

12 inches(305 mm)

9.4 inches(238 mm)

12 inches

(305 mm)

12 inches

(305 mm)

9.4 inches(238 mm)

12 inches(305 mm)

782 10168

782 10171

782 10169

782 10172

782 10170

(19” drawer)



1850–1910 MH1930–1990 MH

Indoor Use

10867-A936.2464/a

The duplexer is designed to combine/split Tx and Rx signalsto/from one common Tx/Rx antenna in order to save feeder

cable and antenna costs

It features:


Specifications:

Frequency rangeLow band 1850–1910 MHzHigh band 1930–1990 MHz

Impedance 50 ohms

VSWR <1.25:1

Insertion lossAntenna→ Low band <0.7 dBHigh band→Antenna <0.7 dB

IsolationLow band↔High band >65 dB

Maximum input power <150 watts (low or high band)



Connectors 7-16 DIN female

Application Indoor

Dimensions* 7.9 x 7.6 x 1.7 inches(200 x 192 x 43 mm)


*Includes connectors and mounting feet

1.7 inches(43 mm)

Low Band

7.6 inches(192 mm)

7.9 inches(200 mm)

Antenna High Band

792 544

Mounting Options:

Description

Mount using four screws (max. 4 mm diameter).




Order Information:

Model Description

791 594 Band-stop filter 1550–1700 MHz(indicate stop band frequency and bandwidth when ordering)

791 397 Band-stop filter 1700–1900 MHz(indicate stop band frequency and bandwidth when ordering)

Specifications:

Frequency range791 594 1550–1700 MHz791 397 1700–1900 MHz

Impedance 50 ohms

Maximum input power <15 watts (at inserion loss of <0.5 dB)

Connectors N female

Temperature range 0° to +50° C


Dimensions 6.7 x 5.1 x 2.8 inchesincluding connectors (170 x 130 x 72 mm)


The 791 594 and 791 397 Band-stop filters are used whenindividual frequencies are to be attenuated. Due to their

easy tuning they are particularly suitable for laboratory test

purposes.

They can be used for:

● attenuating interfering signals.

● increasing the isolation between a transmitter and areceiver.

● suppressing intermodulation products.

Design and construction: The band-stop filters are built up

of two coaxial resonators mounted on a stable mounting

plate.

Filter characteristics: Narrow stop band with high stop bandattenuation, low insertion loss outside of the stop band.

Tuning: The band-stop filters are factory tuned to the indicated

stop band. Tuning can also be done on site by following the

included instructions. Since both resonators can be tunedindependently, two separate interfering signals can be

attenuated or one interfering signal can be suppressed withvery high attenuation.


Tuning examples: 791 594 791 397f0=1550 MHz f

0=1625 MHz f

0=1700 MHz f

0=1700 MHz f

0=1800 MHz f

0=1900 MHz

Stop band attenuationat a stop band bandwidth of:at f

0±0.5 MHz >24 dB >28 dB >30 dB >22 dB >25 dB >33 dB

at f0±0.2 MHz >33 dB >37 dB >39 dB >31 dB >36 dB >45 dB

at f0±0.1 MHz >37 dB >40 dB >45 dB >34 dB >40 dB >50 dB

791 594, 791 397

1550–1700 MHz1700–1900 MHz

Indoor Use Only

Mounting Options:

Description

Mount using four screws (max. 4mm diameter)

Band-Stop Filters



791 594, 791 3Band-Stop Filters


(Tuning examples)



791 398

1800–2000 MHz

Indoor Use Only

10843-A936.968/a

Specifications:


Impedance 50 ohms

Maximum input power <15 watts

Connector N female

Temperature range 0° to +50° C


Dimensions 6.8 x 5.1 x 2.3 inches(includes mounting plate) (170 x 130 x 58 mm)


The 791 398 Band-pass filter can be used if several frequencies outsideof a narrow pass band are to be attenuated. Due to its easy tuning it

is particularly suitable for laboratory test purposes.

It can be used:

● To improve the input selectivity of receivers or amplifiers.

● To increase the isolation of transmitters whose respective antennas

are mounted close together.

● To suppress noise sidebands and intermodulation products.

● As a combiner component.

Design and construction: The band-pass filter consists of two

capacitively coupled coaxial resonators mounted on a stablemounting plate.

Filter characteristics: Narrow pass band with low insertion loss, high

stop band attenuation outside the pass band.

Tuning: The band pass filter is factory tuned to the indicated pass band

center frequency f0

with a bandwidth of f0±1.75 MHz. Tuning can also

be done by the customer by following the instructions provided.


Tuning examples: f0=1800 MHz f

0=1900 MHz f

0=2000 MHz

Insertion loss <1.2 dB <0.9 dB <0.8 dBat f

0–f

0±1.75 MHz

Stop band attenuationat f

0±10 MHz >16 dB >13 dB >9 dB

at f0±15 MHz >24 dB >20 dB >15 dB

at f0±120 MHz >29 dB >25 dB >20 dB

at f0±125 MHz >33 dB >29 dB >24 dB

VSWR (input)at f

0–f

0±1.75 MHz <1.6:1 <1.35:1 <1.3:1


(Tuning examples)

Mounting Options:

Description


Band-Pass Filter



10844-A936.1320/a

Specifications:


Impedance 50 ohms

Maximum input power <25 watts

Connector N female

Temperature range +10° to +40° C




The 792 219 Band-stop filter is used when individual frequenciesare to be attenuated. Due to its easy tuning it is particularly

suitable for laboratory test purposes.

It can be used for:

● attenuating interfering signals.

● increasing the isolation between a transmitter and a receiver.

● suppressing intermodulation products.

Design and construction: The band-stop filter is built up ofthree coaxial resonators.

Filter characteristics: Narrow stop band with high stop band

attenuation, low insertion loss outside of the stop band.

Tuning: The band-stop filter is factory tuned to the indicatedstop band. Tuning can also be done on site: For frequency

increase/decrease only three self-locking tuning screws needto be adjusted (using a 1.5 mm hex key). Since all three

resonators can be tuned independently, two or three separate

interfering signals can be attenuated or one interfering signalcan be suppressed with very high attenuation by superposing

the stop poles.


Tuning examples: f0=1800 MHz f

0=1900 MHz f

0=2000 M

Stop band attenuationat a stop band bandwidth of:at f

0±0.5 MHz >45 dB >50 dB >55 dB

at f0±0.2 MHz >50 dB >55 dB >60 dB

at f0±0.1 MHz >55 dB >60 dB >65 dB

7.5 inches(191 mm)

5.9 inches(149 mm)

2.1 inches(54 mm)

TuningScrews

792 219


(Tuning examples)

Mounting Options:

Description


Band-Stop Filter

1800–2000 MH

Indoor Use On



3 dB Coupler

(90° Hybrid)

806–960 MHz

Indoor Use

806–960 MHz 3 dB Couplers

10864-A936.1483/c

Order Information:

Model Description

K637061 3 dB coupler with N female connectors

K637067 3 dB coupler with DIN female connectors

Specifications:


VSWR* <1.1:1

Impedance 50 ohms

Attenuation* 1↔2 / 1↔3 3 ±0.4 dB (see diagram I)

Attenuation* 2↔3 See diagram II

Directivity >30 dB

Maximum input power <500 watts total power two inoutswith max. 350 watts at one input



Dimensions 6.2 x 3.7 x 2.2 inches max.including connectors (157 x 95 x 55 mm)


*VSWR and attenuation values are measured when the remainingports are terminated with 50 ohm loads.

The 3-dB coupler can be used:

• As a decoupled power spliter with a ratio of 1:1

• For the decoupled combining of two transmitters with a

frequency spacing as narrow as desired (at 3 dB loss)

• For the decouped combining of two receivers with frequencyspacing as narrow as desired

• For the decoupled combining of two transmitter/receiver units,

whose integrated duplexers are within the same frequencyrange

• As a frequency-independent 90° phase shifter

• As a component to form combiners

Function:

The 3-dB coupler has four ports, two of which are decoupledfrom each other. For example, effective power entering into

port 1 is distributed into ports 2 and 3. Port 4 is decoupled and

without power if ports 2 and 3 are ideally matched. In practicean absorber of suitable power at port 4 is to be planned in

accordance with the mismatch of ports 2 and 3.

Decoupled combining can be achieved via the diagonallyopposite ports 2 and 3 or 1 and 4.

For indoor use.

K637061, K637067

Mounting Options:

Description

Mount using two screws (max. 5 mm diameter).



Coupler

806–960 MHz

Indoor Use Only

10845-A936.1439/g

4.7, 6, 7, and 10 dB Couplers

Order Information:

Model Description

792 937 4.7 dB coupler with N female connector

792 170 4.7 dB coupler with 7-16 DIN female connector

793 105 6 dB coupler with N female connector

792 180 6 dB coupler with 7-16 DIN female connector





Specifications:


Directivity >27 dB

VSWR* <1.1:1

Impedance 50 ohms

Maximum input power <350 watts total powerConnector N or 7-16 DIN female


Dimensions 6.2 x 3.7 x 2.2 inches (max.)including connectors (157 x 95 x 55 mm)


The 4.7-dB coupler is used as a decoupled splitter for power splittingpurposes at a 1:2 ratio.

For example an effective power entering into port 1 is divided betweenthe ports 2 and 3 at a ratio of 1:2.

Thus 1/3 of the input power (attenuation: 4.7 dB) is available at port 2 and2/3 of the input power is available at port 3.

The 6-dB coupler is used as a decoupled splitter for power splittingpurposes at a 1:3 ratio.


Thus 1/4 of the input power (attenuation: 6 dB) is available at port 2 and3/4 of the input power is available at port 3.





For example an effective power entering at port 1 is divided between theports 2 and 3 at a ratio of 1:9.


Port 4 is decoupled and remains free of power if the ports 2 and 3 areideally matched. In practice an absorber of suitable power at port 4 is tobe planned in accordance with the mismatch of ports 2 and 3.

Decoupled combining can be achieved via the diagonally opposite ports 2and 3 respectively 1 and 4.

4.7 dB Coupler 6 dB Coupler 7 dB Coupler 10 dB Coupler

Attenuation* 1↔3 (4↔2) 1.8 ±0.3 dB 1.25 ±0.2 dB 1.0 ±0.2 dB 0.5 ±0.2 dB

Attenuation* 1↔2 (4↔3) 4.7 ±0.5 dB 6 ±0.5 dB 7 ±0.5 dB 10 ±0.5 dB

*VSWR and attenuation values are measured when the remaining ports are terminated with 50 ohm loads.

Mounting Options:

Description

Mounts using two screws (max. 5.5 mm diameter).

806–960 MHz Couplers



6 and 10 dB Couple

10859-A936.1600/e

Order Information:

Model Description





Specifications:


VSWR* <1.15:1

Impedance 50 ohms




Dimensions 5.3 x 3.7 x 1.6 inches (max.)including connectors (135 x 95 x 40 mm)


The 6-dB coupler is used as a decoupled splitter for powersplitting purposes at a 1:3 ratio.

For example an effective power entering into port 1 is dividedbetween the ports 2 and 3 at a ratio of 1:3.

Thus 1/4 of the input power (attenuation: 6 dB) is available at

port 2 and 3/4 of the input power is available at port 3.

The 10-dB coupler is used as a decoupled splitter for powersplitting purposes at a 1:9 ratio.

For example an effective power entering at port 1 is divided

between the ports 2 and 3 at a ratio of 1:9.

Thus 1/10 of the input power (attenuation: 10 dB) is available

at port 2 and 9/10 of the input power is available at port 3.

Port 4 is decoupled and remains free of power if the ports 2 and3 are ideally matched. In practice an absorber of suitable power

at port 4 is to be planned in accordance with the mismatch of

ports 2 and 3.

Decoupled combining can be achieved via the diagonally oppositeports 2 and 3 respectively 1 and 4.


6 dB Coupler 10 dB Coupler

Attenuation* 1↔3 (4↔2) 1.5 ±0.5 dB (800–1900 MHz) 0.5 ±0.5 dB (800–1900 MHz)

Attenuation* 1↔2 (4↔3) 6 ±1 dB (800–960 / 1700–1900 MHz) 10 ±1 dB (800–960 / 1700–1900MHz)

6 ±1.5 dB (960–1700 MHz) 10 ±2 dB (960–1700 MHz)

Mounting Options:

Description

Mount using two screws (max. 5.5 mm diameter).

800–1900 MHz Couplers

3 dB Coupler

800–1900 MH

Indoor Use Onl



3 dB Coupler

(90° Hybrid)

800–2200 MHz

ndoor or Outdoor Use

10862-A936.2235/c

Specifications:


VSWR* <1.2:1

Impedance 50 ohms



Directivity >20 dB



Temperature range -30 to +70° CConnector 7-16 DIN female









• For the decouped combining of two receivers with frequencyspacing as narrow as desired





Function:






For indoor or outdoor use (IP66).

793 554

Mounting Options:

Description


800–2200 MHz Coupler



10860-A936.2072/b

Specifications:


VSWR* <1.15:1

Impedance 50 ohms



Directivity >25 dB












• For the decoupled combining of two receivers with frequencyspacing as narrow as desired





Function:






For indoor or outdoor use (IP66).

Mounting Options:

Description


3 dB Coupler

1700–2200 MH

Indoor or Outdoor

793 0061700–2200 MHz Coupler


http://slidepdf.com/reader/full/kahrein-katalogas 316/36500 10863-B936.2425/d

Specifications:


Attenuation*Tx1→Antenna 3 ±1.2 dBTx2→Antenna 3 ±1.2 dBTx1↔Tx2 See diagram

Impedance 50 ohms

VSWR* <1.2:1


Maximum input power <150 wattsper Tx port with max. 16 signalsat each port






* VSWR and attenuation values are measured when the remainingports are terminated with 50 ohm loads

The 793 555 3 dB Coupler with Cable Absorber is designedto combine two BTS (Base Tranceiver Stations) onto one

antenna to save feeder cable and antenna costs.

● As opposed to standard absorbers, the 793-555 Cable

Absorber provides excellent intermodulation performance.

● The frequency spacing between transmitter signals can beas small as required.

● DC signals at the Tx1 port are passed to the antenna port.

● DC signals at the Tx2 port are short-circuited.


Note:

The 3-dB Coupler with Cable Absorber is designed for a max. inputpower of 150 W per input (in total 300 W). Wall-mounting of thedevice is recommended with the cooling ribs running in a verticaldirection (see photo) in order to dissipate the max. heat power of150 W and not to over-heat the unit.

When installed in a 19˝ rack, it must be ensured that the max. heatpower of 150 W is sufficiently dissipated, so that the ambienttemperature does not rise above +50° C. This can be achievedfor example by the additional installation of a correspondinglydimensioned ventilator in the 19˝ rack or by reducing the maximum

input power.

The max. connector coupling torque of 18.4 ft-lb (25 Nm) is not to beexceeded.

Mounting Options:

Description

Wall mount using four screws (max. 7mm dia.).

19 inch rack mount on pre-installed 19 inch sliding bars (2 heightunits required).

793 555

3 dB Couplerwith

Cable Absorber

800–2200 MHz

Indoor Use Only

800–2200 MHz Coupler with Cable Absorber

13.2 inches(336 mm)

2.5 inches(64 mm)

17.5 inches(444 mm)



792 702

10858-B936.1941/c

Specifications:


Attenuation*Tx1→Antenna 3 ±0.4 dBTx2→Antenna 3 ±0.4 dBTx1↔Tx2 See diagram

Impedance 50 ohms

VSWR* <1.15:1

Intermodulation (2x20w) IM3: -160 dBcMaximum input power <150 watts

per Tx port with max. 16 signalsat each port






* VSWR and attenuation values are measured when the remainingports are terminated with 50 ohm loads

The 792 702 3 dB Coupler with Cable Absorber is designedto combine two BTS (Base Tranceiver Stations) onto one

antenna to save feeder cable and antenna costs.

● As opposed to standard absorbers, the 792-702 Cable

Absorber provides excellent intermodulation performance.

● The frequency spacing between transmitter signals can be assmall as required.

● DC signals at the Tx1 port are passed to the antenna port.

● DC signals at the Tx2 port are short-circuited.


Note:

The 3-dB Coupler with Cable Absorber is designed for a max. inputpower of 100 W per input (in total 200 W). Wall-mounting of the deviceis recommended with the cooling ribs running in a vertical direction(see photo) in order to dissipate the max. heat power of 100 W andnot to over-heat the unit.

When installed in a 19˝ rack, it must be ensured that the max. heat powerof 100 W is sufficiently dissipated, so that the ambient temperaturedoes not rise above +50° C. This can be achieved for example by theadditional installation of a correspondingly dimensioned ventilator inthe 19˝ rack or by reducing the maximum input power.

The max. connector coupling torque of 18.4 ft-lb (25 Nm) is not to beexceeded.

Mounting Options:

Description

Wall mount using four screws (max. 7mm dia.).

19 inch rack mount on pre-installed 19 inch sliding bars(2 height units required).

3 dB Coupler

with Cable Abso

1700–2200 MH

Indoor Use Onl

1700–2200 MHz Coupler with Cable Absorber

13.2 inches(336 mm)

2.5 inches

(64 mm)

13.2 inches(336 mm)

2.5 inches(64 mm)

17.5 inches(444 mm)


http://slidepdf.com/reader/full/kahrein-katalogas 318/36502 10548-A936.1419/b

Specifications:


Power slitting ratio 728-044 1:3729-812 1:4

Power dividing loss 728-044 <5.5 dB (including insertion loss)729-812 <6.5 dB (including insertion loss)

Impedance 50 ohms

VSWR* < 1.2:1

Maximum input power <100 watts (each input)

Connector N female

Isolation >25 dB

Weight 728-044 1.1 lb (0.5 kg)729-812 1.54 lb (0.7 kg)

Dimensions 728-044 5.5 x 2.9 x 2.7 inches(140 x 74 x 68 mm)

729-812 5.5 x 4.5 x 2.7 inches(140 x 114 x 68 mm)

* VSWR is measured when the remaining ports are terminated with 50 Ω loads.

The 728 044 and 729 812 decoupled power spitters can be used:

● For power distribution, e.g. from one common antenna to several

receivers with frequency spacing as narrow as desired.

● For power distribution, for example: from one transmitter to severaloutputs.

● For the decoupled combining of several transmitters with frequency

spacing as narrow as desired (at 4.7 dB or 6 dB loss).

● For the decoupled combining of two transmitting/receiving units,whose integrated duplexers are within the same frequency range.

Function: The decoupled 3:1 power splitter has 3 inputs, oneoutput, and 3 absorber ports. The decoupled 4:1 power splitter

has 4 inputs, one output, and 4 absorber ports. The inputs are onlydecoupled if the absorber ports are terminated with 50Ω loads of

suitable power.

Di m ens i on i ng the absorber : The abso rbe rs o f

the 3:1 power splitter must be dimensioned so that atleast 2 ⁄ 3 of the power fed into the inputs can be absorbed.

Example: If a power of 50 watts is fed into every input, thenthe absorbers must be able to absorb 33 watts each.

The absorbers of the 4:1 power splitter must be dimensioned so

that at least 3 ⁄ 4 of the power fed into the inputs can be absorbed.

Example: If a power of 50 watts is fed into every input, thenthe absorbers must be able to absorb 37 watts each.

Order Information:

Model Description

728-044 Decoupled power spitter 1:3

729-812 Decoupled power spitter 1:4

Mounting Options:

Description

Mount using two screws (4 mm maximum).

28 044, 729 812

Decoupled

Power Splitter

806–960 MHz

806–960 MHz Decoupled Power Splitters



10548-B936.1435/a

Specifications: K6373621 790 881 791 498


Attenuation* 1↔2 or 1↔4 3±0.4 dB 3±0.3 dB 3±0.4 dBSee diagram 1 See diagram 1 See diagram 1

Attenuation* 1↔3 or 2↔4 See diagram 2 See diagram 2 See diagram 2


VSWR* < 1.2:1 < 1.2:1 < 1.3:1

Maximum input power 100 watts (each input) 100 watts (each input) 50 watts (each input)


Weight 0.71 lb (0.32 kg) 0.71 lb (0.32 kg) 0.55 lb (0.25 kg)

Dimensions 5.9 x 3.4 x 1.2 inches 5.9 x 3.4 x 1.2 inches 4.2 x 3.1 x 1 inch(150 x 87 x 30 mm) (150 x 87 x 30 mm) (106 x 80 x 26 mm)

* Attenuation and VSWR are measured when the remaining ports are terminated with 50 Ω loads.

The hybrid ring junction can be used:

● As a power splitter with a 1:1 ratio.

● For the decoupled combining of two transmitters withfrequency spacing as narrow as desired (at 3 dB loss).

● For the decoupled combining of two receivers with frequency

spacing as narrow as desired.

● For the decoupled combining of two transmitter/receiverunits whose integrated duplexers are within the samefrequency range.

● As a component to form combiners.

Function: The hybrid ring junction has four ports, two of which

are decoupled from each other. For example, effective powerentering port 1 is distributed into ports 2 and 4. Port 3 is

decoupled and without power if ports 2 and 4 are ideally

matched. In practice an absorber of suitable power at port 3is to be planned in accordance with the mismatch of ports

2 and 4. Decoupled combining can be achieved via ports 1and 3, or ports 2 and 4.

Order Information:

Model Description

K6373621 Hybrid ring junction (806–960 MHz)

790 881 Hybrid ring junction (890–960 MHz)

791 498 Hybrid ring junction (1710–1880 MHz)

K6373621790 881

791 498

Mounting Options:

Description K6373621 790 881 791 498

Mounting Mounts with two screws. Mounts with two screws. Mounts with four screws.

K6373621, 790 881, 791 4

Hybrid Ring Junc

806–960 MHz1710 MHz–1880

Hybrid Ring Junction



K6373621

790 881

790-498


K6373621, 790 881, 791 498 Hybrid Ring Junction



10471-C936.131/i

50 Ohm RF Loads

Kathrein RF loads are manufactured to the most exactingstandards and are highlighted by the following features:

● excellent impedance match over a wide frequency range

● loads 10 watts and larger provide a high degree of RF shielding

and stability due to the aluminum enclosure

● convection cooling permits installation in any attitude

●

50 and 100 watt units can be panel mounted to further aidequipment cooling

● 1.5 watt model IP rated IP65 for outdoor use, all other modelsfor indoor use only K6226111

T50MN/2

50 OHM RF LOARF Loads

K6226301T50FN/50

K6226501T50FN/100

K6226201

T50FN/25

K6226401

T50FN/10

784 10367T50M7/1.5

Specifications:

Power FrequencyRating* Range VSWR Connector Dimensions Weight Model

0.5 watt 0–2700 MHz <1.08:1 (0–1000 MHz) N male 1.3 in. long, 0.8 in. diameter 0.09 lb K6226611<1.15:1 (1000–2000 MHz) 33 mm long, 21 mm diameter 0.04 kg T50MN/0.5<1.2:1 (2000–2700 MHz)

1.5 watt 0–4000 MHz <1.1:1 (0–2000 MHz) 7-16 male 1.6 in. long, 1.3 in. diameter 0.27 lb 784 10367<1.3:1 (2000–4000 MHz) 40 mm long, 32 mm diameter 0.12 kg T50M7/1.5

7-16 female 1.6 in. long, 1.1 in. diameter 0.27 lb 784 1047040 mm long, 29 mm diameter 0.12 kg

2 watt 0–2700 MHz <1.08:1 (0–1000 MHz) N male 1.3 in. long, 0.8 in. diameter 0.09 lb K6226111<1.15:1 (1000–2000 MHz) 33 mm long, 21 mm diameter 0.04 kg T50MN/2<1.2:1 (2000–2700 MHz)

10 watt 0–2700 MHz <1.08:1 (0–1000 MHz) N male 3.3 x 3.2 x 1.6 inches** 0.55 lb K6226411<1.15:1 (1000–2000 MHz) 85 x 82 x 40 mm** 0.25 kg T50MN/10

<1.2:1 (2000–2700 MHz) N female 3.2 x 3 x 1.6 inches** 0.55 lb K622640182 x 77 x 40 mm** 0.25 kg T50FN/10


<1.2:1 (2000–2700 MHz) N female 4.4 x 3.7 x 1.4 inches** 1.1 lb K6226201113 x 94 x 35 mm** 0.5 kg T50FN/25

7-16 male 4.9 x 1.4 x 3.7 inches** 1.1 lb K6226217124 x 94 x 35 mm** 0.5 kg T50M7/25

7-16 female 4.9 x 3.7 x 1.4 inches** 1.1 lb K6226207125 x 94 x 35 mm** 0.5 kg T50F7/25


<1.2:1 (2000–2700 MHz) N female 5.1 x 3.5 x 2.6 inches** 1.8 lb K6226301130 x 90 x 67 mm** 0.8 kg T50FN/50

7-16 male 5.2 x 3.5 x 2.6 inches** 1.8 lb K6226317133 x 90 x 67 mm** 0.8 kg T50M7/50


100 watt 0–1000 MHz <1.08:1 N male 6.3 x 6.1 x 4.5 inches** 5.3 lb K6226511161 x 156 x 114 mm** 2.4 kg T50MN/100

N female 6.1 x 6 x 4.5 inches** 5.3 lb K6226501156 x 153 x 114 mm** 2.4 kg T50FN/100


* Power rating at 40°C ambient temperature. ** Includes connector lengthThe maximum power rating increases or decreases

with falling or rising ambient temperature.



Mechanical Accessories

M ounting Configurations 806 - 960 MHz Panels ................................................................................................................................................................309 1425 - 2700 MHz Panels.......................................................................................................................................................310

M ounting Kit Options for Panel Antennas 1 x 738 546 ..........................................................................................................................................................................................................311 2 x 738 546 ..........................................................................................................................................................................................................311 3 x 738 546 ..........................................................................................................................................................................................................311 1 x 131 1847 .....................................................................................................................................................................................................311

2 x 131 1847 .....................................................................................................................................................................................................311 850 10002...............................................................................................................................................................................................................311 850 10003...............................................................................................................................................................................................................311

Tilt Kit Options for Panel Antennas 840 90013...............................................................................................................................................................................................................312 850 10007...............................................................................................................................................................................................................312 850 10013...............................................................................................................................................................................................................312

3-Sector Panel Mounting Brackets 742 033.........................................................................................................................................................................................................................314 742 034.........................................................................................................................................................................................................................314 742 263.........................................................................................................................................................................................................................315

Dimensions of Panel Profiles .......................................................................................................................................................316

3-Sector DTMA Mounting Brackets 782 10347, 782 10348, 782 10349 ................................................................................................................319

D ual Panel Mounting Kit 742 113.........................................................................................................................................................................................................................320 850 10006...............................................................................................................................................................................................................321 2 x 850 10002 ................................................................................................................................................................................................321 2 x 850 10003 ................................................................................................................................................................................................321

M ounting Kit Options for Omni & Directional Antennas Mounting Matrix .........................................................................................................................................................................................322 MKPP-23...................................................................................................................................................................................................................323 MKPS-1........................................................................................................................................................................................................................323 MKPS-2........................................................................................................................................................................................................................323 MKPS-3........................................................................................................................................................................................................................323

MKPS-4........................................................................................................................................................................................................................323MKPS-5........................................................................................................................................................................................................................323MKPS-13...................................................................................................................................................................................................................323

MKPX-2........................................................................................................................................................................................................................323 MKPX-3........................................................................................................................................................................................................................324

MKPX-4........................................................................................................................................................................................................................324MKPX-5........................................................................................................................................................................................................................324MKPX-6........................................................................................................................................................................................................................324

MKPX-9........................................................................................................................................................................................................................323MKPX-10...................................................................................................................................................................................................................324MKPX-11...................................................................................................................................................................................................................324MKPX-12...................................................................................................................................................................................................................324

Tilt Kit Options for Omni & Directional Antennas MKTB-1 .......................................................................................................................................................................................................................324

MKTB-3 .......................................................................................................................................................................................................................324Azimuth Adjustment Kit for Panel Antennas

850 10014 ..............................................................................................................................................................................................................325 850 10015 ..............................................................................................................................................................................................................325 850 10016 ..............................................................................................................................................................................................................325 850 10017 ..............................................................................................................................................................................................................325

307



Selecting the right mounting hardware is painless with the

broad selection of clamps, bands, tilt kits, and specialty items

needed to securely and correctly install Kathrein antennas.

308



Mounting Configurations for Panel Antennas 806–960 MH

Mechanical TiltStandard Mount

Mounting for 2 to 4.6 inch(50 to 115 mm) OD mast

Sector Mount

Mounting for 2.375 to 6 inch(60 to 152 mm) OD mast

Using 1 x 738 546, 2 x 738 546, 3 x 738 546mounting kits.

Using 742 033, 742 263, 742 034 mounting kits.

Using 850 10013 and 737 976 tilt mount kits.



Mounting Configurations for Panel Antennas1425–2700 MHz

Standard Panel Large Panel

(optional mounting

for any PCS panel)

Standard Tilt

Using 2 x 131 1847 mounting kit. Using 2 x 738 546 mounting kit.

Using 850 10013 tilt mount kit.



Mounting Kit Options for Panel Antennas

1 x 738 546 2 x 738 546 3 x 738 546

850 10002850 10003

1 x 131 1847 2 x 131 1847

2 x 738 546*

3 x 738 546*

for use with most 3-point mount panel antennas

ships in sets of 3 bracketsMast dia. 2–4.5 inches (50–115 mm)


for use with 2-point mount panel antennas> 48 inches (1219 mm) long

ships in sets of 2 brackets

Mast dia. 2–4.5 inches (50–115 mm)Weight 4 lb (1.8 kg)

1 x 738 546*

for use with most 1-point mount Cellular

panel antennas

Mast dia. 2–4.5 inches (50–115 mm)Weight 2 lb (0.9 kg)

2 x 131 1847for use with 2-point mount PCS panel antennas<48 inches (1219 mm) long

and accessories


1 x 131 1847for use with 1-point mount PCS panel antennas

<48 inches (1219 mm) longand accessories


Mounting Ki

* 850 10002 Mounting clamp for 4.3–8.7 inch(110–220 mm) OD steel mast

11.9 lb (5.4 kg).

* 850 10003 Mounting clamp for 8.3–15 inch(210–380 mm) OD steel mast.

21.2 lb (9.6 kg).


http://slidepdf.com/reader/full/kahrein-katalogas 328/36512 10884-A

850 10013for use with 2-point mount panel antennas> 48 inches (1219 mm) long

Note: 3-point point panel antennas require an

additional 840 90013 bracket

64 mmM8

64 mmM8

850 10007for use with 2-point mount

Cellular and Dualband panel antennas

from 55–110 lb (25–50 kg)

Tilt Kit Options for Panel Antennas

850 10013

840 90013

850 10007

Tilt Mount Kits



Model Description

850 10013 Locking Tilt Mount Kit for use with 2-point mount50.9–51 inch (1294–1296 mm) panel antennas, 0–15 degrees downtilt angle76–76.3 inch (1930–1936 mm) panel antennas, 0–11 degrees downtilt angle101.6 inch (2580 mm) panel antennas, 0–8 degrees downtilt angle


Material Hot-dip galvanized steel


840 90013 Locking Tilt Mount Bracket for use with 850 10013 to change from 2-point to 3-point mount




850 10007 Heavy-duty Tilt Mount Kit for use with 2-point mount panel antennas 55–110 lb (25–50 kg)downtilt angle dependent on antenna length.




Tilt Kit Options for Panel Antennas



3 Sector Panel Mounting Brackets742 033, 742 034

Dimensions:742 033 A B C D E F Dout

inches 4.5 3.5 8.5 8.2 1.9 1.8 18.1mm 114.3 88 217 207 49 45 460

742 034 A B C D E F Dout

inches 5.5 3.9 9.3 9 1.9 1.8 19mm 139.7 100 236 228 49 45 482

Specifications:

Angle between antennas 120°

Suitable for mast diameter*742 033 4.5 inches (114.3 mm) OD.742 034 5.5 inches (139.7 mm) OD.

Number of pieces 2 x 3 sector clamp2 x mounting support clamp

Materials3 sector clamp Hot-dip galvanized steelMounting support clamp AluminumFasteners Stainless steel

Outer diameter (Dout) of the 3 A-Panel Arrangement742 033 18.1 inches (460 mm)742 034 19 inches (482 mm)

* Customer assumes all responsibility to ensure that the mounting pipe isadequate to support the intended load. For use with steel pipe only (notaluminum) with a minimum 0.25 inch (6 mm) wall thickness.

Dout

A

Torque: 5.9 ft-lb (8 Nm)

B

C

D

60°

Mounting support clamp

E

F

3 sector clamp

(supports the antenna assembly

during azimuth adjustment)

• Slim and unobtrusive design.

• Nearly cylindrical optical appearance with a small outer diameter.

• All components can be ordered separately (antennas or clamps).

• Mounting support clamp that holds the antenna assembly in vertical position for safe

and easy azimuth adjustment.

• Suitable for all A-Panels with a width of 10–10.4 inches (254–262 mm).

Order Information:

Model Description

742 033 Three-panel Sector Mounting Kit(120 deg. ea.) for 4.5 inch(114.3 mm) OD steel mast.

742 034 Three-panel Sector Mounting Kit(120 deg. ea.) for 5.5 inch(139.7 mm) OD steel mast.




5.39 inches(137 mm)


PA1

6.34 inches(161 mm)


PA2


6.73 inches(171 mm)PA3

5.04 inches(128 mm)


PC1

4.33 inches(110 mm)

10.2 inches(259 mm)

PC2

Note: The dimensions listed here show themaximum outside dimensions includingmounting brackets, end caps, etc. andtherefore may not match dimensionsshown on individual data sheets.



10.59 inches

(269 mm)


4.49 inches(114 mm)


PC3

4.49 inches(114 mm)

10.2 inches(259 mm)

PC4

10926-E



6.42 inches(163 mm)

1.97 inches(50 mm)

PF1

2.52 inches(64 mm)

6.42 inches(163 mm)

PF2

3.11 inches(79 mm)


PF3

2.52 inches(64 mm)

6.42 inches(163 mm)

PF4

3.27 inches(83 mm)

6.38 inches(162 mm)

PF5

8.11 inches(206 mm)

3.47 inches(88 mm)PF6

3.54 inches(90 mm)


PF7

3.82 inches(97 mm)

12.99 inches

(330 mm)

PF8

3.82 inches(97 mm)

6.1 inches(155 mm)

PF9

Dimensions of Panel Profi

3.43 inches(87 mm)

6.1 inches(155 mm)

PF10

4.25 inches(108 mm)

6.1 inches(155 mm)

PF11




742 033 and 742 034Dout

5 4 +

5 4

Ð

5 4 +

5 4

Ð

+ 4 5 Ð 4 5

742 263 Dout

Note: The dimensions listed here show the maximum outside dimensions including mounting brackets, end caps, etc.and therefore may not match dimensions shown on individual data sheets.

Dout Dout Dout742 263 742 033 742 034

Profile Width Depth Mast dia. 3.5" (88.9 mm) 4.5" (114.3 mm) 5.5" (139.7 mm)

PA1 10.63 inches 5.39 inches Not 18.1 inches 19 inches(270 mm) (137 mm) Recommended (460 mm) (483 mm)

PA2 10.63 inches 6.34 inches Not 20 inches 21 inches(270 mm) (161 mm) Recommended (508 mm) (533 mm)

PA3 10.63 inches 6.73 inches Not 21 inches 21.9 inches

(270 mm) (171 mm) Recommended (533 mm) (556 mm)PA4 12.13 inches 6.93 inches Not 22 inches 23 inches

(308 mm) (176 mm) Recommended (559 mm) (584 mm)

PA5 10.59 inches 6.65 inches Not 21 inches 22 inches(269 mm) (169 mm) Recommended (533 mm) (559 mm)

PC1 10.51 inches 5.04 inches Not 18.5 inches 19.4 inches(267 mm) (121 mm) Recommended (470 mm) (493 mm)

PC2 10.2 inches 4.33 inches Not 17.7 inches 18.3 inches(259 mm) (110 mm) Recommended (450 mm) (465 mm)

PC3 11.93 inches 4.49 inches Not 19 inches 19.8 inches(303 mm) (114 mm) Recommended (483 mm) (502 mm)

PC4 10.4 inches 4.49 inches Not 18.5 inches 19 inches(255 mm) (114 mm) Recommended (470 mm) (483 mm)

PF1 6.42 inches 1.97 inches 10.2 inches 12 inches 13 inches(163 mm) (50 mm) (259 mm) (305 mm) (330 mm)

PF2 6.42 inches 2.52 inches 10.2 inches 12.25 inches 13.25 inches(163 mm) (64 mm) (259 mm) (311 mm) (337 mm)

PF3 10.63 inches 3.11 inches 13.7 inches 15.5 inches 16 inches(270 mm) (79 mm) (348 mm) (394 mm) (406 mm)

PF4 6.42 inches 2.52 inches 12 inches 13.75 inches 14.5 inches(163 mm) (64 mm) (305 mm) (349 mm) (368 mm)



PF7 12.05 inches 3.54 inches NA 17.1 inches 18 inches(306 mm) (90 mm) (434 mm) (457 mm)

PF8 12.99 inches 3.82 inches NA 17.7 inches 18.4 inches(330 mm) (97 mm) (450 mm) (467 mm)




For antennas with rear facing connectors contact Kathrein Scala Division Sales Engineering to verifycompatibility with sector mount brackets.



Bottom view

Lower Clamp

Upper Clamp

3 Sector DTMA Mounting Brackets 782 10347, 782 10348, 782 1034

Dimensions:782 10347 A B C D Dout

inches 3.5 2.8 6.7 7.7 14.2

mm 88.9 70 170 196 360

782 10348 A B C D Dout

inches 4.5 3.3 7.5 8.6 15.4mm 114.3 83 190 219 390

782 10349 A B C D Dout

inches 5.5 3.7 8.7 8.9 16.3mm 139.7 95 221 225 415

Specifications:

Angle between DTMAs 120°

Suitable for mast diameter*782 10347 3.5 inches (88.9 mm) OD.782 10348 4.5 inches (114.3 mm) OD.782 10349 5.5 inches (139.7 mm) OD.

Number of pieces 2 x 3 sector clamp

Materials3 sector clamp Stainless steelFasteners Stainless steel

Outer diameter (Dout) of the 3 DTMA Arrangement782 10347 14.2 inches (360 mm)782 10348 15.4 inches (390 mm)782 10349 16.3 inches (415 mm)

Weight (includes both upper and lower clamp)782 10347 4.2 lbs (1.9 kg)782 10348 4.4 lbs (2 kg)782 10349 5.3 lbs (2.4 kg)

Dout

A

Torque: 12.5–14.8 ft-lb(17–20 Nm)

60°

• Slim and unobtrusive design.

• Nearly cylindrical optical appearance with a small outer diameter.

Order Information:

Model Description

782 10347 Three DTMA Sector Mounting Kit(120 deg. ea.) for 3.5 inch(88.9 mm) OD steel mast.

782 10348 Three DTMA Sector Mounting Kit(120 deg. ea.) for 4.5 inch(139.7 mm) OD steel mast.

782 10349 Three DTMA Sector Mounting Kit(120 deg. ea.) for 5.5 inch

(139.7 mm) OD steel mast.

Torque: 8.9–11.1 ft-lb

(12–15 Nm)

D

C

B



Configuration

without mechanical downtilt

Configuration

with mechanical downtilt

Dual Panel Mounting Kit742 113

The 742 113 Dual Panel Mounting Kit consists of two hot-dipgalvanized mounting plates and necessary fasteners. It is used to

mount two 65° or 90° panel antennas side by side.

Specifications:

Number of mounting plates 2Antenna length 79 inches (2000 mm) maximum

width 6.1 inches (155 mm) maximum

Material hot-dip galvanized steel



Mounting Mounts using the supplied fasteners

6.1 inches

(116 mm)

10.6 inches(270 mm)

Order Information:

Model Description

742 113 Dual Panel Mounting Kit


http://slidepdf.com/reader/full/kahrein-katalogas 337/36511201-A

936.2432/a

Dual Panel Mounting Kit

The 850 10006 Dual Panel Mounting Kit consists of two hot-dip

galvanized mounting plates and necessary fasteners. It is used to mount

panels with a maximum width of 10.3 inches (262 mm) and less than 55lb (25 kg) each.

Specifications:

Number of mounting plates 2

Antenna length 102.4 inches (2600 mm) maximumwidth 10.3 inches (262 mm) maximum

Material clamp Hot-dip galvanized steelfasteners Stainless steel



Mounting Mounts using the supplied fasteners.Requires 2 x 850 10002 or 2 x 850 10003mounting clamp listed below.

Recommended torque for M8 bolted connections: 8.8 Lb-Ft (12 Nm)

850 10006, 850 10002, 850 1000

390±1

72±0.3

64±0.3 64±0.264±0.2

280±0.5

34

7 3

R 1 0

9

0 – 0 . 5

Ø 9

+ 1

0

Order Information:

Model Description

850 10006 Dual panel mounting kit

2 x 850 10002 Mounting clamp for 4.3–8.7 inch(110–220 mm) OD steel mast11.9 lb (5.4 kg).

2 x 850 10003 Mounting clamp for 8.3–15 inch(210–380 mm) OD steel mast.21.2 lb (9.6 kg).



Mounting Kit Options for Omni & Directional Antennas

* Requires 2 each MKPX-2

*

*

*

*

*

*



Mounting KiMounting Kit Options for Omni & Directional Antennas

MKPX-9

MKPX-2

MKPP-23MKPS-1, MKPS-2, MKPS-3,MKPS-4, MKPS-5

MKPS-13

MKPP-23

MKPS-1, MKPS-2

MKPS-3, MKPS-4MKPS-5, MKPS-1

MKPX-2, MKPX-9



Tilt Mount Kits Tilt Kit Options for Omni & Directional Antennas

MKTB-3*

MKTB-1

MKTB-1

MKTB-3

* Phantom mast attachmentbracket shown is par t of theassociated yagi antenna

MKPX-3, MKPX-4,MKPX-5, MKPX-6

MKPX-10MKPX-11, MKPX-12

KPX-3, MKPX-4,KPX-5, MKPX-6,KPX-10, MKPX-11,

KPX-12



Panel Antenna Azimuth Adjustment Kit 850 10014, 850 100

Specifications: 850 10014 850 10015 850 10016 850 10017

Mounting surface Mast Mast Wall Wall

Number of brackets 2 2 2 2

Distance between bolts (A) 2.5 inches 2.8 inches 2.5 inches 2.8 inches(64 mm) (72 mm) (64 mm) (72 mm)

Angular range ±30° ±30° ±30° ±30°

Weight 1.2 lbs 1.5 lbs 2.3 lbs 2.6 lbs(0.55 kg) (0.7 kg) (1.05 kg) (1.2 kg)

Max. permissable static load per kitX direction 2150 N 5100 N 2150 N 5100 NY direction 760 N 1350 N 760 N 1350 N

Supplied mounting hardware Antenna mounting hardware included Antenna mounting hardware includedWall mounting hardware not included

850 10016, 850 100

Y

X

gnitnuomllaWgnitnuomeloP

• Hot-dip galvanized with stainless steel nuts.

A

Recommended torque for all fasteners: 14.75 ft-lb (20 Nm)

11106-A936.3037




Advanced X-POL Antenna Standards .................................... 332

Calculating Downtilt ................................................................ 331

Calculating HPBW Touchdown Point ...................................... 333

Comparison of Mechanical and Electrical Downtilt ............................................................. 334

Directional Antennas In Front of Reflecting Surfaces .......................................................... 337

Dual Polarized Base Station Antennas For Polarization Diversity System ........................................... 329

Engineering Reference - Equations ....................................... 340

Formula For Estimating Gain For A Standard Directional Dipole Array Using The E & H Plane Patterns ....................................................... 331

Glossary ................................................................................. 344

Isolation Between Dipoles ...................................................... 339

Model Number Cross Reference ............................................ iii

Panel Antenna Test Specifications ......................................... xiv

Radiation Patterns for Side-mounted Omni Antennas ........... 336

Signal Distribution of Power Splitters ..................................... 335

Signal Distribution of Power Taps ........................................... 335

Wind Survival Rating .............................................................. 333

327



I N F O R M A T I O N

328



2 λ

6–9 λ 6–9 λ


The space diversity antenna configuration certainly provides

good electrical results, but the number of antennas required is a

negative factor with regard to the resulting optical appearance, the

increased space requirements and the greater amount of mechani-

cal hardware and feeder cables needed.

In view of the difficulties getting construction permits from the

authorities concerned and approval from property owners for

the installation of antenna systems, an advanced system with a

low-level optical impact had to be found.

Dual Polarized Base Station Antennas ForPolarization Diversity Systems

It is well known that in a cellular network, mobile phones have

considerably lower transmittal power than the transmitters of the

base stations. This means that the transmission from the mobile

phone to the base station (uplink) is much more unfavorable in

relation to the transmission from the base station to the mobile

phone (downlink). To compensate this, a way of improving thequality of reception at base stations had to be found.

Due to the multi-path signal propagation of radio signals, which

occurs in urban areas, so called Space Diversity Reception has

been introduced which provides the best results in the field.

Space Diversity Reception is based on the following

idea:

The signal transmitted by a mobile phone is reflected in the propa-

gation field and reaches the base station via different paths and

phase angles. As a result, the signal at the base station receiving

antenna is the sum or various vectors with different amplitudes,

phases and polarizations. If two receiving antennas are separated

horizontally from each other, (preferable to vertical separation),

then it is highly likely that one of them will provide the required

signal strength (principle of uncorrelated signals). A logic unit

ensures that the higher signal level of the two receiving antennas

is fed into the receiving systems.

Depending on the characteristics in the propagation area, the use

of a Space Diversity Receiving System will produce a diversity

gain of 3 to 5 dB, as compared to using only one single receiving

antenna.

Dual Polarized Base Station Antennas ForPolarization Diversity Systems (cont)

Extensive investigations and trials have shown that so-called

larization diversity Reception is equivalent to or almost equiv

to Space Diversity Reception. Polarization Diversity Rece

means that the reception levels of two orthogonally pola

antennas are compared and then the stronger signal is led t

receiver.

The clear development objective was to design dual-pola

antennas that have the same outer dimensions as single pola

antennas and with equivalent gain figures and radiation patt

The number of individual antennas can thereby be consider

reduced, resulting in improved optical appearance, reduced s

requirements and with less mechanical hardware.

It can generally be said, that the isolation between neighbo

transmitting antennas, as well as between a transmit and a re

antenna must amount to at least 30 dB in order to avoid:

● interfering intermodulation products

● blocking of the receivers

Fig. 1: Sector antenna system using Space Diversity

Reception - 3 antennas, 3 feeders

Rx1

Tx Rx2

Fig. 2: Sector antenna system with Polarization Divers

Reception - 2 antennas, 3 feeders

Tx Rx1

+ Rx2

Tx1

Fig. 3: Sector antenna system with Polarization Diversi

Reception using a duplex filter

1 antenna, 3 feeders, 1 duplexer

Duplexer

Rx1

Rx2




solation figures for various antenna arrangements are available

rom Kathrein Scala Division.

Radiation patterns and half power beam widths ofX-pol antennas:

Vertically or horizontally polarized antennas show constant po-

arization regardless of the azimuth angle from which the antenna

s observed.

However the polarization of a 45° polarized antenna is not always

45°, it varies with the azimuth angle.


Fig. 4: X-polarized antenna for 2 transmitting and

2 receiving channels

1 antenna, 2 feeders, 2 duplexers

● the activation of the transmitter’s VSWR monitoring system

by an adjacent transmitter

This requirement for 30 dB isolation also applies to dual-polar-

zed antennas. Initially dual-polarized antennas with horizontal

and vertical polarization were preferred since this antenna con-cept easily provides the required 30 dB isolation figure between

the horizontally polarized system and the vertically polarized

system.

Practical results with horizontal / vertical dual-polarized antennas

are fairly positive. However, there is also a weakness.

Since the mobile antennas (i.e. on cars or mobile phones) mainly

operate in a vertically polarized mode, the propagation efficiency

s more favorable to the vertical system of a horizontal/vertical

dual-polarized base station antenna than to the horizontal system.

Thus horizontal polarization is not really suitable for transmit-

ting purposes.

However, with +45°/-45° dual-polarization antennas, both sys-

tems are equivalent with respect to their propagation efficiency.

The two systems can therefore be used with good results for

transmit and receive applications. Furthermore, this antenna

concept allows simultaneous transmission from two transmitters

without the use of a transmitter combiner.


Fig. 5: Varying polarization of a dipole set at a slant of

45°

The vector of the radiated electrical field strength

is fully described by a pair of orthogonal vector

components; in other words, the vector is described

by a rectangular coordinate system.

According to Fig. 6, any field strength vector can be describedeither by a coordinate system, defined by the E

v- vector and the

EH

- vector, or with the same preciseness by a coordinate system

defined by the E+45°

- vector and the E-45°

- vector.

This concept is easy to understand if one considers the angles

of orientation when a slanted dipole is viewed from different

perspectives.

A dipole, which is set at a slant of +45° when viewed from the

front, will appear to be vertically polarized when viewed from

the side and will then appear at a slant of -45° when viewed from

the rear.

Tx1

Duplexer

Rx1a

+Rx2a

Tx2

Duplexer

Rx1b

+Rx2b

+45° polarizedvertically polarized

-45° polarized

Dipole

Fig. 6: Separation of a vector E into orthogonal

components

vertical+45°

45°

horizontal

E

E+45

EV

E-45

EH

-45°

45°-polarization: EH

= EV

= E+45

-3dB, E-45

=0

α




This means that the exactness of the 45° polarization of an x-polar-

ized antenna can be tested by measuring the radiation pattern in

vertical polarization and in horizontal polarization or, alternatively

by measuring the radiation pattern in +45° polarization and in

-45° polarization (Fig. 7 and Fig. 8).

If the field strength vector is exactly +45°, the co-polar value is

100% and the cross-polar value is 0%.

In other words, if the polarization is almost 45°, the radiation

patterns measured in vertical polarization Ev

and in horizontal

polarization EH

will also be quite close to each other, or referring

to the second coordinate system, the cross-polar value E-45°

of the

field strength will be much smaller than the co-polar one E+45°

.

If the polarization is exactly 45°, the half power beam widths

of the radiation patterns measured in vertical polarization and

in horizontal polarization are all of the same value.


Fig. 7: Radiation pattern of a Kathrein Scala Division X-

polarized 65° Antenna, measured with vertical and

horizontal polarization.

Fig. 8: Radiation pattern of a Kathrein Scala Division

X-polarized 65° Antenna, measured with +45° and

-45° polarization.

Formula For Estimating Gain For A StandDirectional Dipole Array Using The E & HPlane Patterns

*Gain (dBi) @ 10 log (32400/EH)

E = E plane 3 dB beamwidth in degrees

H = H plane 3 dB beamwidth in degrees

Formula does not take into account losses for internal harnes

and input connector losses.

Estimated harness loss 0.2 dB/meter of antenna length

Estimated connector loss 0.1 dB

Printed circuit antennas have higher losses causing less

ciency.

*R. S. Elliot, “Beamwidth and Directivity of Large Scanning Arra

The Microwave Journal, January 1964

Calculating Downtilt

Example

1 mile = 5,280 ft

6.2 miles x 5,280 = 32,736 ft

2400 ÷ 32, 736 = 0.0733138

tan-1(0.0733138) = 4.2 degrees

Formula

angle = tan-1 (h

1-h

2)(

d)

Where: h1= Elevation of the base antenna (ft)

h2= Elevation of the mobile antenna (ft)

d = Distance (ft)

11,000 feet

8,600 feet

2,400 feet

6.2 miles




Kathrein X-Pol Panels 1800 MHzTypical Cross Polar Ratio (CPR)

CPR CPR CPR

Half-power Main ±30° ±60°

Beam Width direction sector sector

65° 20 dB 16 dB 14 dB

90° 17 dB 13 dB 10 dB

Many of the X-Pol antennas on the market are of patch technology

on printed circuit boards for power-splitting purposes. Kathrein,

or many years, has used the proven dipole-type technology to-

gether with low-loss cable harnesses, which clearly offers more

opportunities for perfecting certain antenna characteristics.

We present the new, Kathrein Panels as our concept for the

800/900 MHz X-Pol antenna line. We adapted the excellent and

well proven mechanical design used in our line of 1800/1900

MHz antennas. Instead of a fiberglass cover screwed and sealed

o an aluminum back-plate, the radome now consists of a closed,

elf-supporting fiberglass profile into which the metal parts of

Advanced X-POL Antenna Standards

Kathrein Scala Division X-Pol antennas for polarization diversity

epresent the latest development stage in antenna technology. An

ncreasing number of network operators realize the advantage

f installing three dual +/-45 degree polarized antennas for a

omplete three sector site, where previously six or nine vertically

olarized antennas had to be installed.

For polarization diversity to function properly it is very important

hat the different polarized signals are as independent as possible

rom each other (principle of uncorrelated signals). The most

mportant point is the “Cross-polar ratio (CPR)”, i.e. the ratio of

he signal levels of similar polarizations compared to dissimilar

olarizations. The CPR should be quoted for the whole sector

width (+/-60 degree), not just for the main radiating direction.

The antenna gain is already considerably reduced at the sector

dges due to the horizontal pattern, therefore a CPR as high as

ossible is desired. The system suppliers demand at least 10 dB

or +/-60 degree from the main direction. Kathrein Scala Division

X-Pol antennas more than fulfil these requirements.

Kathrein X-Pol Panels 800/900 MHzTypical Cross Polar Ratio (CPR)

CPR CPR CPR

Half-power Main ±30° ±60°

eam Width direction sector sector

65° 22 dB 20 dB 15 dB

90° 20 dB 15 dB 12 dB

Advanced X-POL Antenna Standards (cont)

the antenna are inserted. There are no drill-holes at all in the

profile which is closed by two sealed end caps. This completely

closed design offers ideal permanent protection against environ-

mental influences and also increases the mechanical stability of

the antennas.

Apart from the existing comprehensive range of X-Pol antennas

which can be found in our catalogues, we now also have low

gain versions for 800/900 MHz band with a length of 26 inches

(656 mm).

Advantages of Kathrein’s dipole X-Pol type antennas com-

pared to typical patch printed or circuit board solutions:

1. Excellent cross polar ratio over azimuth.

The dipole design delivers remarkable cross polar ratio not

only in the main direction but also across the complete sec-

tor.

2. Low intermodulation products.

Unlike printed circuit antennas, the intermodulation products

are typically -150 dBc (2X25 watts).

3. Low internal losses.

The cable harness provides a low loss power distribution,

which enables shorter antenna lengths.

4. High isolation.

Patent pending decoupling elements ensure an isolation

between the two inputs of a min. >30 dB (typically 35 dB).

5. Constant electrical performance under bad weather condi-

tions.

Due to the dipole design, rain, ice and snow have little ef-

fect on the electrical parameters such as VSWR, isolation

and cross polar ratio.



Comparison of Mechanical and Electrical Downtilt

Mechanical Electrical

The downtilt angle varies over the horizontal beamwidth. Patterns

measured ±90° from the center of the beam have decreasing tiltangle until there is no tilt 90° from the main beam.

The horizontal half-power beam width increases with greater

downtilt angle.

The resulting gain reduction depends on azimuth direction.

● There is uniform downtilt over the whole azimuth range.● The horizontal half-power beamwidth is independent of the

downtilt angle.● There is identical gain reduction in all azimuth directions.

Mechanical Downtilt Electrical Downtilt

65°

90°

65°

90°

Colors indicate

mechanical and

electrical downtilt

angles

6°

8°

0°




Signal Distribution of Power Splitters Signal Distribution of Power Taps

Tx direction: The RF power fed into port 1 is equally split

between ports 2 and 3.

Rx direction: Ports 2 and 3 are not matched to 50 ohms. The

result is a miss match loss, 25% of the signal is

reflected at port 2 as well as port 3.

Port 2 and 3 are not decoupled; therefore 25% of

the signal is delivered from port 2 to port 3 and

vice versa.

The remaining 50% of the Rx power from ports 2

and 3 is passed on to port 1 (attenuation 3 dB).

Conclusion: Power splitters are reciprocal devices, the power

distribution applies to both directions

Normal insertion losses, input ↔ outputs

2-way splitter : -3 dB

3-way splitter : -4.7 dB

4-way splitter : -6 dB

antennaantenna

50%Tx3

Rx2

25%Rx3 25%Rx2 25%Rx3 25%Rx22 3

50%Rx2

50%Rx3

Rx3

Tx

1

to/from antenna

50%Tx2

Tx direction:The main part of the power from port 1 is directly delivered

port 2, only a small part is coupled out capacitively at port 3

the power relation port 3/port 2 is 1/10;

insertion loss: port 1 → port 2 : 0.4 dB

port 1→ port 3 : 10.4 dB

Rx direction:Ports 2 and 3 are not matched to 50 ohms and the different i

pedances create different miss match losses. Furthermore, po

2 and 3 are not decoupled;

signal flow: port 2 : 0.8 % reflected signal

8.2 %→ port 3

91.0 % → port 1 (attenuation 0.4)

port 3 : 83.0 % reflected signal

8.0 %→ port 2

9.0 %→ port 1 (attenuation 10.4 dB)

Conclusion:Power taps are reciprocal devices, the selected power distribu

applies to both directions.

antenna

91%Tx2

to/from antenna

antenna

9%Tx3

Rx28%Rx3

0.8%Rx

83%Rx3 8.2%Rx2

2

3

91%Rx2

9%Rx3

Rx3

Tx

1




λ

λ

λ

Examples of Horizontal radiation patterns for different mast

diameters where A=0.25λ, 0.5λ, 0.75λ.

Examples also apply for antenna HDB-450.

Radiation Patterns for Side-mountedOmnidirectional Antennas

Radiation Patterns for Side-mountedOmnidirectional Antennas (cont)




Directional Antennas In Front of ReflectingSurfaces

Antennas mounted in front of a reflecting surface, like a building

ace or other large conductive surface, will cause the horizontal

adiation pattern to change. Part of the radiated energy is reflected

and coupled with the reflecting surfaces. Little to no change is

noticed in a reflective environment to the horizontal pattern, when

he center of the main lobe is perpendicular to the reflecting wall.

Deviation from this angle results in more power being radiated

owards the wall, causing greater reflections and coupling with

more distortion of the horizontal radiation pattern.

The reflecting surface depicted in the attached diagrams consists

of a concrete block wall. The panel antennas have 18 dBi of gain

and a 65° horizontal half-power beamwidth. The resulting pat-

erns shown in the following diagrams are for various distances

d) in front of the wall and angles (α) at a frequency of 1850 MHz.

Gain variances reflect changes to the horizontal pattern.

Conclusion: When using an antenna with 60–65 degree half-power beamwidth, the skew angle can be up to ≈30°. Antennas

with 90° should be at a skew angle of no more than ≈15°. In

all instances, the distance from the building should be kept to a

minimum.

S = 0.5 inch

0°

Concrete Block Wall

S = 6 inch

Directional Antennas In Front of ReflectingSurfaces (cont)

0°

0°

S

22.5°

22.5°

S = 6 inch

S = 12 inch

22.5°

Concrete Block Wall

S

S = 12 inch

S = 24 inch

0°

0°




Concrete Block Wall

Directional Antennas In Front of ReflectingSurfaces (cont)

S

45°

45°

45°

45°

S = 6 inch

S = 12 inch

S = 24 inch

22.5°

S =24 inch




Isolation Between Dipo

Isolation between two half-wave dipoles, vertically polarized and positioned vertically in line above eachother on one common mast.

Isolation between two vertically polarized half-wave dipoles mounted laterally.

44

42

40

38

36

34

32

30

28

K o p p e l d ä m p f u n g

dB

3 4 5 6 7 8 9 10 15 20

60

58

56

54

52

50

48

46

44

K o p p e l d ä m p f u n g

dB

20 30 40 50 60 80 100 120

s

I s o l a t i o n

I s o l a t i o n

d

Ratio: Distance (d) / wave-length ( ) Ratio: Distance (d) / wave-length ( )




Engineering Reference - Equations

where: Γ = reflection coefficient

Zr= impedance at reflection

Zo

= characteristic impedance (typically 50Ω)

Voltage Reflection Coefficient

Γ =Z

r- Z

o

Zr+ Z

o

RSLdB

to VSWR

VSWR =( )(RSLdB

20+1)10

( )(RSLdB

20-1

)10

VSWR to RSLdB

RSLdB

= 20Log( )VSWR-1VSWR+1

where: r = VSWR

Γ = reflection coefficient

Pr= reflected power

Pi= incident power

Pt= transmitted power

Voltage Standing Wave Ratio (VSWR)

εr, at frequency ε′,

Material μr

60 106 1010 60 106 1010 (V/inch)

Nylon 1 3.60 3.14 2.80 0.018 0.022 0.0110 400

Plexiglas 1 3.45 2.76 2.50 0.064 0.104 0.0050 990

Polyethylene 1 2.26 2.26 2.26 (<0.0002) 0.005 1200

Teflon (22°C) 1 2.10 2.10 2.10 (<0.005) 0.004 1500

Material μr ε

r σ( /m) Depth of penetration δ for plane waves (m)

Silver 1 1 6.17 x 107 0.064/ √ f

Copper 1 1 5.8 x 107 0.066/ √ f

Aluminum 1 1 3.72 x 107 0.083/ √ f

Brass 1 1 1.6 x 107 0.013/ √ f

ε″ at frequency

Metals

Nonmetals

Material Parameters at 20°C Table 1.1

where: εris relative dielectric from Table 1.1

Characteristic Impedance of Free Space (cont)

c = √μoε

o= propagation velocity = 2.997925 x 108 m/s

(≅ 3 x 108 m/s)

In free space the wavelength is:

For a nonmagnetic dielectric:

1

c

f λ =

c

f √εr

λd = =

λo

√εr

r =1 + ⏐Γ⏐

1 - ⏐Γ⏐VSWR =

Pr

Pi

=⏐Γ⏐2

= r - 1r + 1( )

2

Pt

Pi

=1-⏐Γ⏐2

= 4r

(r + 1)2

Admittance Y = G± jX =1 - Γ1 + Γ( )1

Z= Y

0

Impedance Z = R± jX =1 + Γ1 - Γ( )1

Y= Z

0

where: μo

= free space permeability

= 4.0π x 10-7(H/m)

εo

= free space permitivity

= (F/m)

Characteristic Impedance of Free Space

(10−9

36π)

ηo =

μo

εo

= 120πΩ = 377Ω√




Engineering Reference - Equations (cont)

dBw to Watts

Watts = 10

Milliwatts = 10

(dBw10 )

( dBw+3010 )

dBm to Watts

Watts = 10

Milliwatts = 10

(dBm-3010 )

(dBm10 )

where: Pr= received power

Pt= transmitted power

R = separation distance

Friis Transmission Equation

= free space loss

Using effective areas

( )P

r

Pt

=λ

4πR

2

Gt Gr

Pr

Pt

=A

etA

er

λ2R

( )λ4πR

2

Quarter Wave Matching

Z = √ZoZ

L

where: Z = line impedance

Zo

= desired input impedance

ZL

= given load impedance

Effective Aperature Related to Gain of Antenna

G

=

4πAem

λ2

A

em=

λ2

4π G

Watts to dBm

dBw = 10 log10

(Power Watts)

dBm = (10 log10(Power Watts))+30

Noise Factor

F = ( )Pno

GAP

ni

= SNRIN

SNROUT

= Te

To

-1

NF = 10LogF

Noise Figure

F = F1

+

Cascade Noise Factor

F2-1

GA1

F3-1

GA1GA1

+ +…

Voltage Gain/Loss to dB

dB(gain/loss)

= 20Log10

(Gain or Loss)

dBm to Volts/ μVolts

Volts = Log10

-1( )dBm-1320

μVolts = Log10

-1( )dBm-10720

dBw to Volts/ μVolts

Volts = Log10

-1( )dBw-1720

μVolts = Log10

-1( )dBw-13720


Characteristic Impedance of Coaxial Line

where: a = inner diameter

b = outer diameter

μr

= relative permeability (usually = 1)

εr

= permitivity (dielectric constant)

as given in Table 1.1

a

Zo

= 138 log10

(

b

a)

μr

εr

√b




Freespace Path Loss

L = 96.6 + 20 log(d) + 20 log(f)

where: L = freespace path loss

d = distance in miles

f = frequency in GHz

Directive Antenna Gain

where: G = directive antenna gain

θ = horizontal beamwidth

φ = vertical beamwidth

41253θ . φ

theoretical

G =32400θ . φ

corrected for efficiencies

G =

(

Gain of Parabolic Antenna

where: G = parabolic antenna gain

K = eff L 55%

D = diameter in feet

λ = wavelength in feet

πD

λG = 10 logK )2

Beamwidth of Parabolic Antenna

where: Ψ = beamwidth D = diameter in feet

λ = feet

70λD

Ψ =

Radio Horizon (in miles)

H = √2Tx Rx

where: H = horizon

Tx = transmit height in feet

Rx = receive height in feet

0 10 20 30 40 50 60 70 80 90-10

-8

-6

-4

-2

0

Scan Angle From Broadside, θ

N o r m a l i z e

d D i r e c t i v i t y ,

d B

2πL

λ = 10

2πL

λ = 100

Cos θ

Reprinted from “Microwave Scanning Antennas”, edited by R. C. Hansen, Vol. 1, p. 20, published by Peninsula Publishing, Los Altos, California.

Courtesy of R. C. Hansen

Engineering Reference - Equations (cont)Engineering Reference - Equations (cont)





10 20 30 40 50

Sidelobe Ratio, dB

B e a m B

r o a d e n i n g

Taylor one-parameter distribution

Courtesy of Dr. R. C. Hansen

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.0

Beam Broadening Versus Sidelobe Ratio




XRTT – a wireless telephone digital protocol.

G – Third Generation Wireless – wireless telephone service

encompassing high speed data communications in addition

to voice communications.

AISG – Antenna Standards Interface Group – a global standards

organization whose objective is the establishment of open

control standards among manufacturers of base stations,

switches and base station antennas with remotely adjustable

downtilt.

AMPS – Advanced Mobile Phone System – an analog wireless

telephone protocol; also refers to the 824–894 MHz wireless

phone allocation in the US.

Antenna – The part of transmitting or receiving system that is

designed to radiate or to receive electromagnetic waves.

Array Antenna – An antenna comprised of a number of identical

radiating elements in a regular arrangement and excited to

obtain a prescribed radiation pattern.

AWS – A specific band of radio frequencies (spectrum) intended

to be used for next-generation wireless broadband services.

Most of the spectrum will be used for 3G mobile phone

service, using technologies such as WCDMA+HSDPA or

CDMA EV-DO.

Back Lobe – A radiation lobe whose axis makes an angle of

approximately 180 degrees with respect to the beam axis

of an antenna.

Bandwidth (of an antenna) – The range of frequencies within

which the performance of the antenna, with respect to some

characteristic, typically SWR or return loss, conforms to a

specified standard.

Beam (of an antenna) – The major lobe of the radiation pattern

of an antenna.

CDMA – Code Division Multiple Access – a wireless telephone

digital protocol.

Circularly polarized plane wave – A plane wave whose electricfield vector is circularly polarized.

CPR – Cross polar ratio – a measure on a cross polarized antenna’s

ability to maintain polarization coherence over a 120°

sector.

Dipole Antenna – Any one of a class of antennas producing

a radiation pattern approximating that of an elementary

electric dipole.

Directional Antenna – An antenna having the property of radiating

or receiving electromagnetic waves more effectively in some

directions than other.

Effective Radiated Power (ERP) – In a given direction, the relative

gain of a transmitting antenna with respect to the maximum

directivity of half–wave dipole multiplied by the net power

accepted by the antenna from the connected transmitter.

E-plane, principal – For a linearly polarized antenna, the plane

containing the electric field vector and the direction of

maximum radiation.

Far-field Pattern – Any radiation pattern obtained in the far–field

of an antenna.

Far-field Region – That region of the field of an antenna where

the angular field distribution is essentially independent of the

distance from a specified point in the antenna region.

Free–space Loss – The loss between two isotropic radiators in free

space, expressed as a power ratio.

Front-to-back Ratio – The ratio of the maximum directivity of an

antenna to its directivity in a specified rearward direction.

Gain – The ratio of the radiation intensity, in a given direction, to

the radiation intensity that would be obtained if the power

accepted by the antenna were radiated isotropically.

Gain Flatness – Maximum deviation from the specified antenna

gain, over the entire specified bandwidth.

Ground Plane – A conducting or reflecting plane functioning to

image a radiating structure.

GSM – Global System for Mobile Communications – a wireless

telephone digital protocol.

HAAT – Height above average terrain.

Half–Power Beamwidth – In a radiation pattern cut containing the

direction of the maximum of a lobe, the angle between the

two directions in which the radiation intensity is one–half

the maximum value

Horizontally Polarized Plane Wave– A plane wave whose electric

field vector is horizontally polarized.

H-plane – For a linearly polarized antenna, the plane containing

the magnetic field vector and the direction of maximum

radiation.

ISM band – Industrial, Scientific, and Medical band; several

bands allocated in the US for unlicensed low power

communications devices, at 900 and 2400 MHz; uses include

wireless LAN’s, Bluetooth applications, wireless internet,

and spread spectrum point–to–point services.

Isolation Between Antennas – A measure of power transfer from

one antenna to another.

GLOSSARY




Loading – The modification of a basic antenna such as a dipole

or monopole caused by the addition of conductors or

circuit elements that change the input impedance or current

distribution or both.

Log Periodic Antenna – Any one of a class of antennas having

a structural geometry such that its impedance and radiation

characteristics repeat periodically as the logarithm of

frequency.

Major Lobe – The radiation lobe containing the direction of

maximum radiation.

Minor Lobe – Any radiation lobe except a major lobe.

Monopole – An antenna, constructed above an imaging plane,

which produces a radiation pattern approximating that of an

electric dipole in the half space above the imaging plane.

Near-field Region – That portion of the near–field region of an

antenna between the far–field and the reactive portion of the

near–field region, wherein the angular field distribution is

dependent upon distance from the antenna.

Null Fill – Redirecting a portion of the signal from the Major Lobe

to fill the Nulls present between the Major Lobe and the

Lower Minor Lobes of the vertical radiation pattern. Used

to improve the coverage of area close in to the transmit site.

(Null Fill is typically represented as a percentage.)

Omnidirectional Antenna – An antenna having an essentially

non–directional pattern in a given plane of the antenna anda directional pattern in any orthogonal plane.

PCS – Personal Communication Services – Digital wireless

services that include voice and data employing either the

TDMA, CDMA or GSM protocols; also refers to the 1850–

1990 MHz wireless phone allocation in the US.

Polarization– In a given direction from the antenna, the polarization

of the wave transmitted by the antenna.

Radiation Pattern – The spatial distribution of a quantity that

characterizes the electromagnetic field generated by an

antenna.

Radome – A cover, usually intended for protecting an antenna from

the effects of its physical environment without degrading its

electrical performance.

Reactive Field – Electric and magnetic fields surrounding an

antenna and resulting in the storage of electromagnetic

energy rather than in the radiation of electromagnetic

energy.

Reflector Antenna – An antenna consisting of one or more

reflecting surfaces and a radiating (receiving) feed system.

Relative Gain - The ratio of the gain of an antenna in a

direction to the gain of a reference antenna.

RET – Remote Electrical Tilt – antenna systems having the a

to adjust the tilt of the main beam from the horizontal to

angle below the horizon by remote means.

Side Lobe Level – The maximum relative directivity of a

lobe with respect to the maximum directivity of an ant

usually expressed in decibels.

Side Lobe Suppression – Any process, action, or adjustme

reduce the level of the side lobes or to reduce the degrad

of the intended antenna system performance resulting

the presence of side lobes.

TDMA – Time Division Multiple Access – a wireless telep

digital protocol.

TMA – Tower Mount Amplifier – a receive–only preamplifier

to overcome cable losses in high frequency communica

systems.

USLS – Upper sidelobe suppression – techniques empl

to reduce the first major upper sidelobe of an anten

prevent interference at distant cell sites employing com

channels.

UMTS – Universal Mobile Telephone Service – the ability fo

services to be provided on a worldwide basis using a com

protocol and overlapping radio spectrum.

VSWR – Voltage Standing Wave Ratio.

Vertically polarized plane wave – A plane wave whose el

field vector is vertically polarized.

V-pol – Vertically polarized antennas.

WiFi – Short for “Wireless Fidelity”, is a set of product compati

standards for wireless local area networks (WLAN) bas

the IEEE 802.11 specifications.

WiMAX – An acronym that stands for Worldwide Interopera

for Microwave Access, is a certification mark for prothat pass conformity and interoperability tests for the

802.16 standards.

WLAN – Wireless Local Area Network – Ethernet or

computer networking protocol deployed using RF in

of cable connections from node to node.

X-pol – Cross–polarized antennas; having independent radi

elements at ± 45°; used in diversity systems.

Yagi-Uda Antenna – A linear end-fire array consisting of a d

element, a reflector element, and one or more dir

elements.


GLOSSA



Notes

kahrein katalogas

Documents

Transcript of kahrein katalogas