Kabuki masks - step by step
-
Upload
jenna-freck -
Category
Education
-
view
805 -
download
1
Transcript of Kabuki masks - step by step
Japanese Kabuki Masks7th grade core class
Intro and Set-upSlide Show 1. (Kabuki) 2. Makeup
Also there are slides at the end of this document.
Materials:
Templates,
Staplers,
Scissors,
Raffia,
Tape,
popsicle sticks
Carbon paper for transfer of image
mech. pencils for tracing/transfer
Pens -- black, red, and gold
Pictures...
These are some Kabuki designs that can be traced on to the oval template after
it’s cut out. This can help students place the eyes. nose and lips.
Step by Step
Final steps...
Final step: Staple around the mask, then put stick in between the tabs at the
bottom, then wrap with black tape (see finished product)
Template
1.cut out two
2.leave tab
Transfer using carbon paper.
1.Tape one oval to the table.
2.Tape the graphite paper graphite down on top of the oval. hinge tape at top.
3. Tape the image of the face on top of the graphite paper, ready to trace, hinge the tape at top (
make a sandwich with graphite in the middle face down)
4. Trace with hard tip pencil or pen tool over the xerox face to insure transfer.
Designing, adding decoration
Finishing up...
Mask cut out, stapled,
popsicle stick added
and taped
Adding Raffia For Hair ( optional)
Students can place hair on top of the head
or even to make a beard
1. use hole punch to punch through the
mask
2. cut raffia about 12-14 inches
3. tie the raffia through the mask about
halfway through double it for thicker
hair. tie in a full knot for a more even
knot.
Finished masks!
Faces will be on only
one side (due to time)