K36 XZ CONCRETE BOOM PUMP TRUCK-MOUNTED · 2012. 5. 31. · Placing boom Pumping unit Driven by...
2
6200 6140 4500 4000 max 11300 1450 7250 91° 180° 250° 250° 7,8 7,6 7,6 8,6 35,6 23,8 -25 35 30 25 20 15 10 5 0 -5 -10 -15 -20 m m 31,4 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 m K36 XZ Dimensions varying according to truck assembly Dimensions Placing boom Pumping unit Driven by Chassis B5Z 36/32 PA 1506/909 F8 HPG 1408 IF9 PTO 3 - 4 axles TRUCK-MOUNTED CONCRETE BOOM PUMP
Transcript of K36 XZ CONCRETE BOOM PUMP TRUCK-MOUNTED · 2012. 5. 31. · Placing boom Pumping unit Driven by...
-
6200
6140
4500
4000
max
11300
1450
7250
91°
180°
250°
250°
7,8 7,6 7,6 8,6
35,6
23,8
-2535 30 25 20 15 10 5 0 -5 -10 -15 -20m m
31,4
40
35
30
25
20
15
10
5
0
-5
-10
-15
-20
m
K36 XZ
Dimensions varying according to truck assembly
Dimensions
Placing boomPumping unit
Driven byChassis
B5Z 36/32PA 1506/909 F8HPG 1408 IF9
PTO3 - 4 axles
TRUCK-MOUNTED CONCRETE BOOM PUMP
-
CIFA S.p.A.via Stati Uniti d’America,2620030 Senago (Milano) - Italiatel.: +39.02.990131 - fax: +39.02.9981157www.cifa.com
K36 XZ
K36_
ENG
_100
9
Technical data and characteristics subject to modifications without notice
ModelPA
1506/909F8
HPG1408 IF9
Max. theorical output m3/h 150/90 140
Max. pressureon concrete bar 53/95 80
Max. numbers ofcycles per min. nr. 30/17 28
Conc. cylinders(diam. x stroke) mm 230x2000 230x2000
Concrete hopper capacity l 550 600
Hydraulic circuit open closed
Main features• Advantageous assembling on standard 3 - 4 axle chassis• Self-supporting frame - torsion free FEM designed• Placing boom B5Z 36/32, 4 sections, 125 mm pipeline diameter,
“Z” folding system• Fully hydraulic outrigger controls on both sides of the truck• Front outriggers “X” style for a quick set-up and easy pump
placement in narrow areas• Proportional boom control• The “BFC” Best-Flex Cifa supporting system allowing just one man
to change delivery pipeline easily, quickly and safely• Concrete flow rate regulator• F8 pumping system with open circuit: smooth, continuous and easy
movements, combined with high reliabilityalternatively:
HPG-IF pumping unit with closed circuit and reversal flow: superb performances, high pressures and output, high reliability and easy and reduced maintenance; 9 inch S valve • Safety device on opening inspection hatch
Standard equipment• 2 Proportional radio control with two boom movement speed,
synthesiser for automatic frequency search, 8 position joy stick and concrete flow rate regulator. 20 mt cable• Emergency control pad for pumping unit HPG 1808/1113IF • Remote controlled electric vibrator placed on the concrete hopper grid • Centralized lubrification system for pumping unit• Automatic oil lubrification system for pumping pistons on HPG
1808/1113IF• Additional manual lubrification system for pumping unit• Hard plastic outrigger support plates with relative housing• Rear light on hopper• Level readers for stabilization control• Accessories for cleaning and pipes washing• Double thickness concrete pipes, in high resistant steel - CIFA Long
Life Pipes• Aluminium hopper covering
Optionals• High pressure water pump for cleaning• Air compressor for pipeline cleaning• Centralized lubrification system for placing boom• Air pipeline for placing boom• Separated emergency engine kit for independent control
of the hopper mixer, concrete pumping unit, boom and water pump• Continuous boom rotation kit
Model B5Z 36/32
Pipeline diameter mm 125
Max. vertical reach m 35,6
Max. horizontal distance m 31,4
Min. unfolding height m 8,6
Section numbers 4
1st section opening angle 90°
2nd section opening angle 180°
3rd section opening angle 250°
4th section opening angle 250°
Rotating angle 370°
End hose length m 4
Placing boom technical data
Pumping unit technical data
B5Z 36/32PA 1506/909 F8HPG 1408 IF9
PTO3 - 4 axles
Placing boomPumping unit
Driven byChassis
TRUCK-MOUNTED CONCRETE BOOM PUMP
