K - fume extraction - EN NSV4.0-2020

Smoke extraction

Extraction arms

Extraction tables

Extraction walls

Reel exhaust extractors

3

B

| Fume extraction | Extraction arms

FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOGA - Extraction arms

Material St 37.2 black steel powder coated, galvanized structure, PVC flexible hoses

Structure Swivel with integrated shut-off damper,Plastic hood with integrated handle,Pipe segments with integrated frictional joints,Gas springs to balance the pipe segments.

Accessories

ight mounted on hoodWall bracket


welding fumes extraction as well as capturing fine dust particles. The pollutants are captured directly at the emission source, avoiding their expansion within the work space and of being inhaled by the workers.

The arms are manufactured in a hanging or standing version in different lengths.

The extraction arms can work independently, with a single extraction fan or it canbe connected to a main ductwith with a central extraction fan.

These extraction arms are produced according to the following harmonized directives/standards :- 2006/42/EC ; Machine directives

Volumes

Model Code Dn L A B C Weight

(mm) (mm) (mm) (mm) (mm) (kg)

6302200 960230030002300 790

22.0200 2300 790200200

4

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN


YOGA - Extraction arms reach dimensions

Hanging version Standing version

Model K L M N K L M N

(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

2300 2400 600 2000 2200 02200 3200 32002700 3700 3000

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

Suction hood Standard model with integrated handle.

Wall support Wall support to mount extraction arm directly on a wall or structure.

Repalcement grillTo insure that no bigger particles are sucted in the arm.


For Code Dn S Weight

model (mm) (mm) (kg)

3.0320 4.6

200 340

Material St 37.2 black steel powder coated

Material

Material Wre mesh

For Code Z T H Weight

model group (mm) (mm) (mm) (kg)

330330 0.44

0.42

For Code Weight

model Group (kg)

6

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOGEX - Extraction arms

Material onductive PU hoses,

Structure Full-rotation stainless steel swivel with stainless steel shut-off damper,Two stainless steel pipe segments with textolite frictional spacers joints,Conductive polyurethane hose sections with steel wire spiral,stainless steel gas springs.

Accessories

Wall bracket

YOGEX - Extraction arms

and gases arising during technological processes, in areas of explosion risk, where explosive atmosphere can occur, as a mixture

The devices guarantee high level of protection therefore they can

transported air is +70°C.

Earthing

ensure the conductivity of the whole and conduct the electrostatic discharges to the grounding of the installation with a superficial

6

These extraction arms are produced according to the following harmonized directives/standards :- 2006/42/EC ; Machine directives


(mm) (mm) (mm) (mm) (mm) (kg)

947

YOGEX extraction arms are manufactured according to the ATEX 95 (2014/34/EC) directive and carry the Research Certificate No 737/Cw/001 issued by the Technical Supervision Office.

7

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

Suction hood Standard model





3.0

Material

Material

For Code d D H Weight

model (mm) (mm) (mm) (kg)

330

Pressure loss on extraction arm type YOGEX

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOGB - Extraction arms

Material hoses

Structure Swivel,Suction hood with shut-off damper,

-

Accessories



welding dust and gas contamination, as well as other small dust

the contamination to expand in the process room, preventing it from being inhaled by people. The extraction arms can be applied in any areas where the workspace is limited.

small. The extraction arm can work independently, with a single extraction fan or connected to the main collecting ductwork with a central fan.

Volumes

Pressure loss on extraction arm type YOGB

9

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

Model Code Ds Aiflow # of R min R max Weight

(mm) (m³/h) segments (mm) (mm) (kg)

3 2000



2 20002 24003 3000




A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN


Suction hood




320 4.6


Material



340 0.72


Material Wre mesh

For Code Weight

model group (kg)

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOGF - Extraction arms

Material

Structure Swivel,Hood,Flexible hose sleeved over the supporting structure,Tension springs to balance the arm.

Accessories


Volumes


are designed for dust and welding fume extraction, as well as the capturing of fine dust particles. The pollutants are captured directly at the emission source, avoiding their expansion within the room and inhaling by people.

provide convenient arm manoeuvring and position adjustment. The

the workspace.

Use a wall bracket to mount the arm on a wall or column.

to work independently or to connection ferrule to connect to the main collecting ductwork with a central fan.

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN


group (mm) (mm) (mm) (mm) (mm) (kg)

2000 396 976 6.03000 3964000 396 9.0


Suction hood




320 4.6


Material



0.42


Material Wre mesh

For Code Weight

model group (kg)

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

Model Code Connection Max torque Weight

group (mm) (Nm) (kg)

46.0

44006400

YOGA-RO-L/X - Extention arms

Material

Structure

made of aluminium cast rings with a roller bearing, the other rotational extensions have steel swivels with slide bearings.


arm has to be fastened at the end of the set consisting of two rotational extensions.

Pressure loss on extension arm type YOGA-RO

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN


be directly mounted on to the wall.

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN


A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

Segment connector Wall and ceiling supports Terminal stopper

YOGA-KOS-AL - Rail system for extraction arms

Material 2m or 4m aluminum rail segments with integrated rubber flaps

Structure

Accessories

Terminal stopper

YOGA-KOS-AL - Rail system for extraction arms

several meters long and can be operated by one or two extraction

the trolley along the suction rail. The hood of the arm ought to

movement resistances of the trolley and easy adjustment of the

completed work at one welding post, close the shut-off damper

extraction arm. Two extraction arms can be installed at one suction duct simultaneously.

Model Picture Code description Segment length Section Weight

group (mm) (cm²) (kg)

Self-tighteningrail

2000 or 4000 290 9.7

Extraction armtrolley

- - 9.0

Design for extraction arms Ø160 of maximum 3 meters long.

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOFAN - Extraction fans

Material ST37.2 powder coated steel housing

Structure The fan is composed of a housing, an impeller and a motor. The radial

--

nect to the extraction fan wall support. The outlet is ended with a round ferrule to easily connect to a flexible or rigid conduit. For safety reason,

-ded to install a silencer at the fan inlet and outlet.

Accessories

Wall bracket

YOFAN - Extraction fans These fans are designed for local ventilation. They are installed

can overcome significant air flow resistances, they are particularly efficient within the systems of local exhausts.

Maximum temperature of the conveyed air is +60°C. Maximum temperature within the work area +40°C.

Maximum dust concentration of the conveyed air should not

- 2006/42/EC ; Machine directives

Model Code Speed Voltage Power Protection Noise level AirflowMax

VacuumWeight

(rpm) (V) (kW) (IP) (dB[A]) (m³/h) (Pa) (kg)

3000 230 0.37 9403000 3 x 400 0.37 9403000 230 0.373000 3 x 400 0.373000 2303000 3 x 4003000 230 23.03000 3 x 400 23.03000 3 x 400 3900 29.03000 3 x 400 2.2 2400 36.03000 3 x 400 3.0 62003000 3 x 400 64.03000 3 x 400 3300

Also available manufactured according to the ATEX 95 (2014/34/EC) directive.

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOFAN - Extraction fans

Model A B C D E F G H J n x ØG

(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

7.0 400 67.0 400 6

60 7.0 420 660 7.0 420 660 7.0 660 7.0 660 200 7.0 660 200 7.0 660 200 200 246 9.0 49060 200 200 246 9.0

274 9.0 670 232274 9.0 232

90 344 9.0

Dimensions

Curves

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOGA-MINI - Extraction arms

Material PVC, polyamide and Stainless steel

Components Swivel with a vertical pipeThree adjustable pipe segments

Accessories

Table mount

YOGA-MINI - Extraction arms

remove dust and gas impurities arising in workplaces during processes of low emission of contamination in the chemical-, pharmaceutical-, electronic industries as well as in jewellery workshops. They can be mounted directly on the table top or to the side of the table with a table mount.

user can set the arm in the most convenient work position. The elements of the extraction arm are constructed of acid-proof materials.

he pipe of the swivel contains a shut-off damper and can make a full rotation around the vertical axis.

Suction point For point extraction.

Small hood

fume extraction.

Big hood

fume extraction.

Table mounting Easy table top side mounting with this support.

Model Reference Material Ø d Ø D L Weight

(mm) (mm) (mm) (kg)

PVC 70 -PVC - 200

64 7076 2006476 222 90 0.20

Table mount - 30

Model Work range Resistance d A B C D Weight

(mm) at 120 m³/h (Pa) (mm) (mm) (mm) (mm) (mm) (kg)

700 490 60900 220

Dimensions

Accessories

20

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

LGF - Extraction arms

Material

Hoses

Accessories

Quick-coupling for hose extension

LGF - Extraction arms Cheap and versatile extraction arm mounted on a metal structure for wall mounting suitable for welding smoke, light dust and gases.

of the model.

positioning.

Quick coupling

coupling for extension hose.

Switch - hood Spotlight and start/stop-switch available.

Soldering hood Slant cut hood with built-in damper.

Gas springs

Model Reach Diameter # A B C Weight

(mm) (Ø mm) segments (mm) (mm) (mm) (kg)

2 -2 600 600 -

2000 2 -3000 2 -4000 2 -3000 34000 3 730

Ø Air speed 1m 2m 2m + 1m 2m + 2m 3m + 2m

(mm) (m³/h) Joint (Pa) Joint (Pa) Joint (Pa) Joint (Pa) Joint (Pa)

400600 60 70 220

60 70 220200 60 70 220

Performance table for cantilever joints for LGF (ø80 - ø200 mm) as well as range:

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

LGF - Extraction arms

Extension Reach Diameter # A B C Weight

model (mm) (Ø mm) segments (mm) (mm) (mm) (kg)

- -- -

2 -2 -2 -2 -

Performance curve for LGF 1000 - 4000 (ø80 - ø200 mm) :

22

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

RGF - Extraction arms

Material

Hose

Accessories

Quick-coupling for hose extension

RGF - Extraction arms Versatile extraction arm mounted on a metal structure and integrated wall support for wall mounting suitable for welding smoke, light dust and gases.

of the model.

positioning.

Quick coupling

coupling for extension hose.

Switch - hood Spotlight and start/stop-switch available.

Built-on fan Possibility to mount fan directly on wall support.

Ceiling mounting

extension up to 2 metres. Can revolve 360°.

Model Reach Diameter # A B C Weight

(mm) (Ø mm) segments (mm) (mm) (mm) (kg)

2 -2 -2 -2 -2 -

Ø Air speed 2m 2m + 1m 2m + 2m 3m + 2m

(mm) (m³/h) Joint (Pa) Joint (Pa) Joint (Pa) Joint (Pa)

400600 70 220

70 220200 70 220

Performance table for cantilever joints for RGF (ø80 - ø200 mm) as well as range:

23

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

RGF - Extraction arms

Extension Reach Diameter # A B C Weight

model (mm) (Ø mm) segments (mm) (mm) (mm) (kg)

- -- -

2 -2 -2 -2 -

Performance curve for RGF 1000 - 4000 (ø80 - ø200 mm) :

24

A

| Fume extraction | Extraction tables

FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOTA - Suction tables

Material

Construction

YOTA - Suction tables Extraction table with standard extraction by table top. Can be used as glueing, grinding, polishing, welding or as manual cutting table.

filter unit must be connected and ajdjusted. Connection of piping to table is optional on either the right or left side.

Multiple versions are available :YOTA - Standard executionYOTA-BYOTA-BSwithout noise damping.YOTA-BS-ISOwith noise damping.YOTA-EM - top with extraction 30° angled, light in top, lamellas along the side as well as on/off-switch for table light.

Model Air volume Delta P extr. surf. A B C D 1) E F ØG H I Weight

(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)

600600 200

2340 600 640 x 2000 20002900 600 200.0

600 640 x 3000 3000 240.0600 930

2400 600 200 9303200 600 2000 930 200.04000 600 930

600 3000 930 300.0

Dimensions YOTA

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

Adjutable height Easily change the heigth of the work station.

Sturdy construction strong work surface for grinding and sanding.

Dust containerEasy access for dust removal.

Options

are optional as well as the lighting.


Additional equipement for YOTA suction tables (above)

Code Description

group

Options for YOTA suction tables

26

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN




600600 200

2340 600 640 x 2000 2000 240.02900 600 300.0

600 640 x 3000 3000 360.0600 930

2400 600 200 9303200 600 2000 9304000 600 930

600 3000 930 420.0

Dimensions YOTA-B



600600 200

2340 600 640 x 2000 20002900 600 423.0

600 640 x 3000 3000600 930 200.0

2400 600 200 930 292.03200 600 2000 9304000 600 930 474.0

600 3000 930

Dimensions YOTA-BS

27

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN




600600 200 267.0

2340 600 640 x 2000 20002900 600 437.0

600 640 x 3000 3000600 930 206.0

2400 600 200 9303200 600 2000 930 396.04000 600 930

600 3000 930

Dimensions YOTA-BS-ISO



600600 200 200.0

2340 600 640 x 2000 2000

Dimensions YOTA-EM

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOTAPR - Suction tables

Material

Construction

Construction :

YOTAPR - Suction tables Universal extraction table with built-in fan. Can be used as glueing, grinding, polishing, welding or as manual cutting

smoke separation. Meets the class M fliter norm according to The cleaning is ensure manually by roto-cleaning.

fitted with silencer.

Multiple versions are available :YOTAPR - Standard execution.YOTAPR-BYOTAPR-BSsides without noise damping.YOTAPR-BS-ISOand sides with noise damping.

Model A B C D 3) E F ØG H I J

(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

2000 2326

3000 3636

2000 2326

3000 3636

YOTAPR

Model Fan Inst. power Air volume Delta P extr. surf. Weight

model (kW) (m³/h) (Pa) (mm) (kg)

VF 2000VF 2000

2.2 220.02000 290.

2.2 2400VF 2000 200.0VF 2000 230.0

2.2 700 x 2000

2.2 700 x 3000 360.0

29

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

Options

are optional as well as the lighting.

Dust containerEasy access for dust removal.

Integrated fan delivered as a standard.

Wooden slats The table is standard delivered with wooden slats.


Additional equipement for YOTAPR suction tables (above)

Code Description

group

Mounting of fluorescent lighting fitting in hinged top

Options for YOTAPR suction tables

30

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN


Model A B C D 3) E F ØG H I J


2004 2326

3004 3636

2004 2326

3004 3636

YOTAPR-B



VF 2000VF 2000

2.2 300.02000 390.0

2.2 2400VF 2000 240.0VF 2000 290.0

2.2 700 x 2000

2.2 700 x 3000

Filter media :

Model Type Material Application

StandardPolyester flake with PFPT-

coating, antistaticStatic-loaded or hygroscopic particles

optionalPolyester flake with teflon

membrane, antistaticFiner static-loaded dust sorts

The filters meet demands for extraction degree for dust class M according to DIN EN 60335-2-69 Appendix AA (extraction degree > 99.9%).

Dimensions YOTAPR-B

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN


YOTAPRBS



VF 2000 222.0VF 2000 274.0

2.22000

2.2 2400 470.0VF 2000 260.0VF 2000

2.2 700 x 2000

2.2 700 x 3000

Model A B C D E F ØG H I J


790790

2030 790 2326790

3030 790 3636

2030 2326

3030 3636

YOTAPRBSISO



VF 2000 227.0VF 2000

2.2 332.02000 427.0

2.2 2400VF 2000 266.0VF 2000

2.2 700 x 2000466.0

2.2 700 x 3000

Dimensions YOTAPRBS & YOTAPRBSISO

32

A

| Fume extraction | Extraction walls

FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOKO - Suction walls

Material

Accessories


gases and lighter dusts arising during processes or handling.

placed on a flat firm surface

Advantages

High suction levelNo wear, no parts replacement

Model A

backside for maximum work space.

Model B

backside for optimal air flow.

Connection stub Connection piece diameter

Side wallsSide Walls are available for higher efficiency.

Model Model A B C D E F

A B (mm) (mm) (mm) (mm) (mm) (mm)

720 400720 400 0400720 400

400 200200 600

Model Model Min. Delta P Weight

A B (m³/h) (Pa) (kg)

300 300400 300 24

300300 44300

Dimensions

33

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN


Working principle of flow through YOKO suction walls :

OUTLET

Air intake zone

OUTLET

Air intake zone

YOKO - Suction wall with slanted sides

Model Model Min. Delta P Weight

A B (m³/h) (Pa) (kg)

300 300400 300 24

300300 44300

34

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOKO-L - Suction walls

Material

Construction

las for efficient capture velocity

YOKO-L - Suction walls

fumes, gases and lighter dusts arising during processes or handling such as grinding, milling or powder mixing.

surface.

Advantages


Model Air volume Pressure loss A B Ø C D E F Weight

(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (mm) (kg)

900 66 22.033.0

2003 200 203 42.0

Dimensions

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

YOKO-P - Suction walls

Material

Options

YOKO-P - Suction walls

volatile fumes and lighter dusts arising during processes.

steel lamellas or paintstop-fitlers.

surface.

Advantages


Model Air volume 1)Delta P

Start/stopOutlet Ø A B C D Weight

(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (kg)

200 300

Choose in options

2700 200 3003600 2000 300

20007200 400 2000 2000

30003000 600 2000

Dimensions

Model Description Size

Section height: 900mm

Filter cassette with paintstop-filter

Steel cassette for frontal mounting as additional cassette on panel

Steel cassette for frontal mounting as additional cassette on panel- Paintstop-filter

Steel cassette for mounting in front as additional cassette on panel - Steel lamellas

Options

36

A


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

FAIRCAB suction walls

FAIRCAB suction wallsSuction walls with integrated polyester cartridges for painting booths.

cleaning system regulated by differential pressure monitoring, they

These suction walls are produced according to the following harmonized directives/standards :- 2006/42/EC ; Machine directive

Advantages

standard static cartridges- Easy access to the filter cartridges and cleaning system through the access doors- The removable front lattice door prevent dust return towards the booth when compressed air cleaning is activated- Possibility to have the fan mounted on the floor next to the booth.

Model#of

Filter surface

Airflowmax.

fantype

Motorpower

# of

Airconsumption

#of

Dimensions(mm)

cartridges (m²) (m³/h) (kW) valves (Nl/min) buckets L l H4 7000 2 24006 3 2 2020 2400

4 2 2020 2400

260 3 24006 3 2400

364 7 4 3940 240029000 4 3940 2400

MaterialPowder coated steel.

TypeFully welded plates.Polyester cartridges.

Options

- Consultations to have the booth adapted to your needs

37

B


FA.G

roup

_K.F

umeE

xtra

ctio

n.20

20.N

SV

4.0.

EN

FAIRCAB suction walls

Front side, cartridge access through the frontal grills Back side, clean air access throught the side inspection door

View from the inside of the paint booth with the integrated wall Suction wall with fan mounted, fully integrated in paint booth

K - fume extraction - EN NSV4.0-2020

Documents

Transcript of K - fume extraction - EN NSV4.0-2020