K A N S A · 2019-09-18 · Stained Glass Catalogue Kansa are the main UK Importers and...
Transcript of K A N S A · 2019-09-18 · Stained Glass Catalogue Kansa are the main UK Importers and...
K A N S AT o o l s & M a t e r i a l s f o r
D e c o r a t i v e S t a i n e d G l a s s
Enfocus Software - Customer Support
Enfocus Software - Customer Support
Stained Glass CatalogueKansa are the main UK Importers and distributors of stained glass, tools and materials from America, Europe and the Far East. Established in 1976 and based at our large premises for over 33 years.The products selected for this catalogue have been specially chosen as the very best value for money as well as high quality and reliability. We are main agents for Wissmach and Dynasty, giving us a wide range of high quality glass suitable for all types of stained glass work.
Sample sets are available for each glass supplier, details of these can be found on each supplier pagethroughout the catalogue. The Dynasty Ring Mottles and Ice glass however, can not always be trulyrepresented by the samples due to their “Art Glass” nature.
Our ObjectiveTo provide a fast, friendly and efficient service and to keep in stock all products listed in the catalogue.Most products are maintained at the prices quoted in the price list, with the exception of lead and solder which may vary. The pictures in this catalogue are for illustrative purposes only and the goods supplied may differ slightly from those shown.
We have large showrooms displaying glass colours and materials, so customers can select their own products with the help of our experienced sales staff. If you are collecting your order on a Saturday (we are only open the first Saturday of each month) we recommend that you telephone or email your order in advance to save time as it can get very busy.
How To OrderShop Online @ www.kansacraft.co.uk
Telephone: You can telephone your order on 01226 747424.We will make every effort to ensure that telephone orders are despatched correctly, however, we will only take responsibility when the order is confirmed in writing before despatch.
Fax: You can fax your order on 01226 743712.
E-mail: You can e-mail your order to [email protected]
Collection: We are open: Monday to Friday - 9:00am to 5pm (except Bank Holidays).The first Saturday of every month - 10am to 2pm (except the first Saturdayin May which will change to the second Saturday due to the May DayBank Holiday).Please note we are closed ALL Saturdays throughout August.
Payment: We accept cash and the following credit cards: Visa, Visa Delta, MasterCard, Maestro, Solo and Electron.
Returns: Goods can only be returned for credit within 10 days of purchase and with prior arrangementwith our sales staff. A valid receipt must be provided and all returned items are subject to a20% restocking fee. The cost of return must be borne by the customer and damage duringtransit is at the customer’s own risk.
DeliveryWe aim to send out all orders on the day we receive them if the order is placed before 2pm.Normal delivery is 2 days for orders sent by carrier (large orders) and 3 to 5 days for orders sent by post.We offer 24 hour delivery for urgent orders at an extra charge.Full sheets of glass are despatched in wooden crates. A tail lift delivery can be arranged when ordering,please request this option if required. Please see price list for UK mainland delivery charges and enquire forUK offshore and export delivery charges.
Full Sheets of glass are packed in wooden crates (minimum order of 6 sheets or an additional carriage chargewill apply) strapped to pallets to ensure minimum breakage. Full crates hold a maximum of 32 sheets.All types of glass can be mixed in a crate.For safety reasons we prefer not to send single sheets / half sheets of glass in a crate, however, if necessary these can be cut to fit a box (maximum order of 6 sheets). In this case we cannot guarantee against breakage.
1-
K A N S AThe Flour Mill, Wath Road, Elsecar, Barnsley, South Yorkshire, S74 8HW
Enfocus Software - Customer Support
2-
Contents
Ordering & Delivery Information
Contents
Wissmach Aqualite Glass
Wissmach English Muffle Glass
Wissmach Corella Classic GlassWissmach Various Glass
Dynasty Cathedral Glass
Dynasty Clear Textures & Herringbone Glass
Dynasty Opalescent Glass
Dynasty Ring Mottles & Ice Glass
Polish Antique Cathedral Glass
Spectrum Glass
Clear Glass, Clear Float & Mirror
Cutting Glass - Cutters & Cutting ToolsSoldering - Irons & EquipmentTiffany Technique - Copper Foil & ToolsLeaded Work - Tools & MaterialsLead Came - Mommer Lead Came & Strengthening Grinders & Grinding
Decorative Items - Rondels, Jewels, Crystals & NuggetsBevels - Standard Shapes & Pencil BevelsBevels - Bevel ClustersMiscellaneous Items
Glass Painting - Brushes & PaintsParagon Kilns
Lamp Bases - Fan Bases, Figures & Large Deco LadyLamp Bases - Small & Medium Size.Lamp Fittings - Vase Caps, Harps & FinialsLamp Fittings - Pendant Suspensions & SpidersLamp Fittings - Brass PressingsLamp Fittings - Brass Channel & BandingSandblasting
1
2
3
4
5
6
7
8
9
10
11
1213 / 14
15
16
17
18
19 / 20
21 / 22
23 / 24
25 / 26
27
28
29 / 3031 / 32 / 33
34
35 / 36
37
38
39
40
41 / 42
Enfocus Software - Customer Support
Wissmach Aqualite Cathedral Glass Available in the Following:
Full Sheet813 x 1066mm
0.87M²
(32" x 42")
AqualiteSample Set;(SAMPAQ)
All Sample Pieces:76 x 51mm(3" x 2")
Quarter Sheet406 x 533mm
0.22M²
(16" x 21")
Half Sheet813 x 533mm
0.435M²
(32" x 21")
Handicraft203 x 266mm
0.05M²
(8" x 10½")
3-
AQ100SDYClear Seedy
AQ121Pale Green
AQ130Very Pale Blue
AQ591Light Peach / Bronze
AQ100Clear
AQ125Emerald Green
AQ132Pale Blue
AQ598Medium Peach / Bronze
AQ526Lime Green
AQ191Champagne Pink
AQ110Very Pale Amber
AQ140Pale Rose
AQ1102Pale Amber
AQ523MediumTurquoise
AQ142Medium Purple
AQ171Red / Orange
AQ1108Mid Amber
AQ5232Pale Turquoise
AQ5437Violet
Wissmach AqualiteA smooth, water like cathedral glass with a medium obscurity, available in a range of pale tints and colours. From the Wissmach factory in West Virginia USA. 3mm uniform thickness.Can be Laminated to float glass.
Enfocus Software - Customer Support
4-
E4901Clear
E4903Cornwall Green(Pale)
E4911London Fog(Pale Grey)
E4902Dusky Rose(Rose/Brown)
E4906Flaxen Tint(Pale Gold)
E4907Sage Green(Mossy Green)
E4905Scottish Heather
E4910Apricot Beige
E4914Sussex Green(Mid Olive)
E4904Windsor Blue(Green/Blue)
E4913Cranberry Pink
E4916Noble Brass(Mid Amber)
E4915Salem Green(Pale Olive)
E4908Aqua Mist(Sea Green)
E4918Victorian Violet
E4917Regency Gold(Pale Amber)
E4909Princess Blue(Very Pale)
E4919Clover Blossom
E4920Champagne
E4922Midnight Blue(Dark Blue)
E4921Rose Red(Soft Faded Red)
Wissmach English MuffleA reproduction of the textured cathedral glass used in Victorian & Edwardian leaded windows.From the Wissmach factory in West Virginia USA. 3mm uniform thickness.Can be Laminated to float glass.
Wissmach English Muffle Cathedral Glass Available in the Following:
Full Sheet813 x 1066mm
0.87M²
(32" x 42")
English MuffleSample Set;(SAMPEM)
All Sample Pieces:76 x 51mm(3" x 2")
Quarter Sheet406 x 533mm
0.22M²
(16" x 21")
Half Sheet813 x 533mm
0.435M²
(32" x 21")
Handicraft203 x 266mm
0.05M²
(8" x 10½")
Enfocus Software - Customer Support
5-
CX100Clear
CX120Very Pale Green
CX526Green Yellow
CX532Sky Blue
CX161Yellow
CX410Clear / AmberStreaky
CX121Pale Green
CX533Bright Blue
CX171Orange
CX110Very Pale Amber
CX123Sage Green
CX130Very Pale Blue
CX140Pale Rose
CX152Red
CX111Pale Gold
CX124Mid Green
CX132Pale Blue
CX141Rose
CX112Dark Amber
CX125Emerald Green
CX133Mid Blue
CX142Purple
CX191Champagne
CX519Apricot
CX523Teal Green
CX139Very Dark Blue
CX5437Dark Violet
Wissmach Corella ClassicA reasonably priced, slightly textured cathedral glass, for general use.From the Wissmach factory in West Virginia USA. 3mm uniform thickness.Can be Laminated to float glass.
Enfocus Software - Customer Support
6-
W100RClear Restoration
W4120Green / Brown / Clear Streaky
W2001Onyx White (Very Translucent)
W100SDYClear Seedy
W420Green / ClearStreaky
W309White on ClearWispy
WD100Clear Dewdrop
W430Blue / ClearStreaky
W31902Pale AmberWhite Wispy
WF100Clear Florentine(Muranese)
W4320Blue / Green / Clear Streaky
W357Copper RedTranslucent
W410Amber / ClearStreaky
W4430Purple / Blue / Clear Streaky
W607GoldfishTranslucent
W411Dark / LightAmber Streaky
W450Red / ClearStreaky
W832Light TurquoiseTranslucent
Wissmach VariousRestoration Cathedrals (Row 1), Streaky Cathedrals (Rows 1 & 2), Wispy and Opalescent Glass (Row 3).
From the Wissmach factory in West Virginia USA. 3mm uniform thickness.Can be Laminated to float glass.
Full Sheet813 x 1066mm
0.87M²
(32" x 42")
Wissmach VariousSample Set;(SAMPW)
All Sample Pieces:76 x 51mm(3" x 2")
Quarter Sheet406 x 533mm
0.22M²
(16" x 21")
Half Sheet813 x 533mm
0.435M²
(32" x 21")
Handicraft203 x 266mm
0.05M²
(8" x 10½")
We are transitioning towards all Wissmach Glass being available in 1066 x 813mm Sheet Size.
Full Sheet813 x 711mm
0.578M²
(32" x 28")
Half Sheet406 x 711mm
0.29M²
(16" x 28")
Quarter Sheet355 x 406mm
0.144M²
(14" x 16")
Corella ClassicSample Set;(SAMPCC)
All Sample Pieces:76 x 51mm(3" x 2")
Handicraft237 x 271mm
0.06M²
(9" x 10½" )
We still have stock available at 813 x 711mm. Please Enquire.
Enfocus Software - Customer Support
7-
Dynasty Cathedral GlassAn old fashioned glass with excellent cutting properties. 3mm uniform thickness. Made in China.Ideal for restoration work, having good clarity yet obscured with random seeds and reams.
D100Clear
D120Very Pale Green
D5283Light Sage Green
D532Sky Blue
D140Pale Rose
Di100GClear IridisedGranite Back
D1204Pale Leaf Green
D5286Dark Sage Green
D5231Turquoise
D1406Light Rose
D110Very Pale Amber
D124Mid Green
D130Very Pale Blue
D141Rose
D1101Pale Amber
D125Dark Green
D1301Pale Blue
D161Yellow
D543Purple
D111Mid Amber
D523Teal Green
D132Mid Blue
D171Orange
D112Dark Amber
D526Lime Green
D139Dark Blue
D155Red
Enfocus Software - Customer Support
8-
D100PClear Orange Peel(heavily obscured)
D100MHClear Medium Hammered
D100FRClear Fine Ripple
D100SMClear Stretched Muffle Style
D100CHClear FineIrregular Chord
D100QRClear QuarterInch Reeded(with some bubbles)
D100HGClearHerringbone
D111HGAmberHerringbone
D124HGGreenHerringbone
D532HGSky BlueHerringbone
D141HGRoseHerringbone
D543HGPurpleHerringbone
Dynasty HerringboneCathedral glass with a heavy texture to obscure backgrounds. 3mm thick. Made in China.Perfect for windows and lamps.
Dynasty Clear TexturesClear patterned glass with excellent cutting properties. 3mm uniform thickness. Made in China.Ideal for restoration work, having good clarity yet obscured by different textures and some seeds.
Dynasty Cathedral Glass, Clear Textures & Herringbone Available in the Following:
Full Sheet962 x 780mm
0.75M²
(38" x 31")
Half Sheet780 x 481mm
0.375M²
(31" x 19")
Quarter Sheet481 x 390mm
0.19M²
(19" x 15")
Handicraft260 x 240mm
0.06M²
(10" x 9½")
Dynasty CathedralSample Set;(SAMPDC)
All Sample Pieces:76 x 51mm(3" x 2")
Enfocus Software - Customer Support
9-
Dynasty Opalescent GlassOpal glass with good light transmission and excellent cutting properties.3mm uniform thickness. Made in China.
D305Swirled White
D325Green White
D335Blue White
D365Yellow White
D327GreenTranslucent
D633Two Blue Mix
D375Orange White
D188Black
D31507Pale AmberWhite Wispy
D622Two Green Mix
D833Sky Blue Wispy
D675Red Orange
D315Amber White
D623Blue Green
D3396Dark Blue Wispy
D355Medium Red
Di305White OpalIridised
D3152MidAmber White
D359Dark Red Wispy
Di315Amber OpalIridised
D3156DarkAmber White
D3496Dark PurpleWispy
D395Pink White
Enfocus Software - Customer Support
10-
Dynasty Ring MottlesOpaque Art Glass with a varying mix of colours, suitable for Tiffany reproduction work.Please note that the colours in “Art Glass” vary throughout the sheets. Samples cannot always show all the colours in the glass.
DMOT1Amber / YellowRing Mottle
DMOT35Blue / YellowRing Mottle
DICE213Green / Amber / Blue Ice Glass
DMOT2GreenRing Mottle
DMOT5RedRing Mottle
DICE215Green / Yellow /Amber Ice Glass
DMOT25Green / RedRing Mottle
DMOT7OrangeRing Mottle
DICE234Green / Blue /Purple Ice Glass
DMOT26Green / YellowRing Mottle
DMOT9PinkRing Mottle
DICE516Red / Amber /Yellow Ice Glass
DMOT3BlueRing Mottle
DICE1Light Beige /Amber Ice Glass
DICE615Yellow / AmberIce Glass
DMOT34Blue / PurpleRing Mottle
DICE15Yellow / BrownIce Glass
DICE75Orange / RedIce Glass
Dynasty IcePerfect for lamp making, obscured glass with no white opalbut excellent light transmission.
Please note that the colours in “Art Glass” vary throughout the sheets.Samples cannot always show all the colours in the glass.
Dynasty Opalescent Glass, Ring Mottles & Ice Glass Available in the Following:
Full Sheet962 x 780mm
0.75M²
(38" x 31")
Half Sheet780 x 481mm
0.375M²
(31" x 19")
Quarter Sheet481 x 390mm
0.19M²
(19" x 15")
Handicraft260 x 240mm
0.06M²
(10" x 9½")
Dynasty OpalescentSample Set;(SAMPDO)
All Sample Pieces:76 x 51mm(3" x 2")
Enfocus Software - Customer Support
Polish Antique CathedralA good quality, easy to cut, blown antique glass that can be painted & fired. Made in Poland.Please note that shades can vary from batch to batch. Thickness varies from 2.5mm to 3.5mm.
11-
Full Sheet1016 x 1016mm
1M²
(40" x 40")
Please Enquire
Full Sheet1016 x 508mm
0.50M²
(40" x 20")
Please Enquire
TF130Blue on Clear
TP01Clear
T400Clear Reamy
TF150Red on Clear
T2242Forest Green
T2011Pale Green
T607Red
T1021Pale Amber
T608Dark Red
Piast “Cordele” Restoration GlassThe most commonly used clear glass for the restoration ofold windows and traditional lead lights.
The image left shows some slight movement in the glass.
Piast “Cordele” Restoration GlassA clear, mouth blown glass with an active, pronounced texture.
The image left shows the strong movement and characteristics in the glass.
Flashed GlassAntique Flashed glass with slight colour variation throughoutthe sheet. For sandblasting or acid etching.
Available in Blue on Clear & Red on Clear only.
Tatra Piast Cordele, Reamy &Flashed Glass Sheet Sizes can vary;Please SpecifyMaximum Size Required.(Sheets can be split)
Approximate Size is:
We stock the essential Pot Colours needed in restoration.Other colours are available - Allow 3/4 weeks for delivery.
Tatra Pot Colours Sheet Sizes can vary;Please Specify Maximum Size Required.(Sheets can be split)
Approximate Size is:
Enfocus Software - Customer Support
Half Sheet610 x 610mm
0.37M²
(24" x 24")
Full Sheet1220 x 610mm
0.74M²
(48" x 24")
Handicraft305 x 203mm
0.06M²
(12" x 8")
Quarter Sheet610 x 305mm
0.19M²
(24" x 12")
Spectrum Glass Available in the Following:
12-
3356SDense Blue White Opal
152GRuby Red GraniteCathedral
3751SOrange WhiteOpal
3571SDark Red WhiteOpal
6755SRed OrangeOpal
Spectrum GlassRenowned for its colour consistency, uniform thickness (3mm), smooth surface and cut-ability.Remaining stock colours available since the closure of the original factory.Can be Laminated to float glass.
89161SChampagneOpal
89181SChampagneWispy
We have good stocks of the above colours.We may have smaller quantities of other Spectrum colours we used to supply.Please enquire if you are looking for something specific.
3152SDark Amber White Opal
Enfocus Software - Customer Support
13-
Clear Glass & Clear Float Our quick look pages for all clear glass from different manufacturers.
Sheet Sizes for the glass on these pages vary, please see details below or follow the page reference stated.‘St Gobain’ Float Glass is available as follows:
Description Code Full Sheet(mm)
Half Sheet(mm)
Quarter Sheet(mm)
Handicraft(mm)
2mm Float CF2 1220 x 610 610 x 610 610 x 305 200 x 150
3mm Float CF3 610 x 535 535 x 305 305 x 265 265 x 150
4mm Float CF4 660 x 610 610 x 330 330 x 305 200 x 150
6mm Float CF6 802 x 750 750 x 401 401 x 375 200 x 150
4mm Low Iron(no green hue) CFL4 802 x 750 750 x 401 401 x 375 200 x 150
Restoration GlassRestoration Glass is used in listed and period buildings where the glass must look authentic.The movement in restoration glass gives more life to your glazing projects rather than modern float glass.
Georgian Sheet Glass (GEO100) is a float glass that has been heat treated to give a wavy, not quite flatappearance of Georgian and Victorian windows. Optically clear with no marks or imperfections.Made at KANSA to a standard sheet size of 1070mm x 610mm, but can be cut to size requirements.
Tatra Full Blown Restoration (TP01) with waves, characteristic striations and the occasional bubble.
Both images of GEO100 and TP01 below show some slight movement in the glass.
Wissmach Clear Restoration (W100R) is the least obscured of any rolled glasses we supply.
Dynasty Restoration (D100) has the look of old fashioned glass with random texture throughout.
AQ100Clear AqualiteSee Page 3
AQ100SDYClear Seedy AqualiteSee Page 3
E4901Clear English MuffleSee Page 4
CX100Clear CorellaSee Page 5
D100MHClear MediumHammeredSee Page 8
D100CHClear FineIrregular ChordSee Page 8
Glasses above are graded left to right in clarity, from clear to obscure.
W100RWissmach Clear RestorationSee Page 6
D100Dynasty RestorationSee Page 7
W100SDYWissmachClear SeedySee Page 6
TP01Full Blown Clear RestorationSee Page 11
GEO100Georgian SheetSee Above
T400Full BlownClear ReamySee Page 11
Enfocus Software - Customer Support
14-
Di100GClear IridisedGranite BackSee Page 7
WF100Clear Florentine(Muranese)See Page 6
WD100Clear DewdropSee Page 6
D100QRClear Quarter Inch ReededSee Page 8
D100HGClear HerringboneSee Page 6
CFM4mm ThickMirror GlassSee Table Below
CFMA4mm Thick AntiqueDistressed Mirror GlassSee Table Below
D100SMClear StretchedMuffle StyleSee Page 8
GC33mm ThickGlue ChipSee Table Below
GC55mm ThickGlue ChipSee Table Below
D100PClear Orange PeelSee Page 8
D100FRClear Fine RippleSee Page 8
100HRClear Half InchReededSee Table Below
Clear Glass & MirrorOur quick look pages for all clear patterned glass and mirror from different manufacturers.
Mirror GlassAs well as regular mirror glass (CFM) we now stockmirror glass with antique distressed effect (CFMA),both are 4mm thick.See images right.
Description Code Full Sheet(mm)
Half Sheet(mm)
Quarter Sheet(mm)
Handicraft(mm)
Half Inch Reeded 100HR 1070 x 660 660 x 535 535 x 330 268 x 220
3mm Glue Chip GC3 825 x 735 735 x 412 412 x 367 275 x 245
5mm Glue Chip GC5 914 x 610 610 x 457 457 x 305 228 x 178
4mm Mirror CFM 1220 x 610 610 x 610 610 x 305 N/A
4mm AntiqueMirror CFMA 1070 x 637 637 x 535 535 x 318 318 x 267
Sheet Sizes for the glass on these pages vary, please see details below or follow the page reference stated.
Glasses above are graded left to right in clarity, from clear to obscure.
Enfocus Software - Customer Support
Dragon Oil Fed SupercutterCUT36An alternative oil fed cutter,cheaper than the K Star Supercutter.
300mm Cutting SquareCUT26
15-
Cutting GlassCutters and Cutting Tools.
Grozing PliersPLIER23Essential all-round plierswith spring loaded jaws.
Place over either endof the score, apply
pressure and thecut runs along
the glass.
T-Bar cuts strips from 25mm to 300mm wide. Circle cutter cuts circles 75mm to 635mm diameter. The turret contains 6 high quality cutting wheels.
K Star ReplacementCutting Head
CUT42For any K Star Cutter.
K Star Oil Fed SupercutterCUT23A high quality, low priced tungstencarbide cutter with swivel head.
Ball End CutterCUT33Ball end tungstencarbide cutterwith fixed head.
Cut Running PliersPLIER24Steel pliers with acushioned curvedjaw adjustablefor variousthicknessesof glass.Used forrepeated breakingof long thin strips.
DragonCircle CutterCUT29Cut circles from 70mm to 600mm diameter.Turret contains 6 high qualitycutting wheels.
Glastar Circle & Strip CutterCUT39
Cuts borders, rectangles and circles quickly.
Plastic Cut RunnersPLIER29A less expensive versionof the steel cut runners.Made of plastic.
Ringstar BreakersPLIER26
For difficult cuts, particularlyinside curves.
Enfocus Software - Customer Support
Weller 100WattTemperature Controlled IronSOLD72Ideal for studio work.Fitted with a No. 7,6mm tip (370˚C).
Weller 200WattTemperature Controlled Iron
SOLD63A fast studio iron for volume production.
Fitted with a No. 7, 9.5mm tip(370˚C).
Soldering Iron StandIRON23
A heavy duty stand withbuilt in sponge tray.
ReplacementSponge
SOLD26For iron stands.
Flux BrushBRUSH26An inexpensive basic brush.
Flux50ml Water Soluble Flux
FLUX23Contains small amounts of
inorganic acid - Use with care.
200g Flux CrystalsFLUX24
Just dilute withapproximately
1 pint of water.Tallow Candle
TALLOW38Flux for lead came.
Sal Ammoniac BlockSOLD29For cleaning and tinning soldering iron tips.
Replacement Tipsfor 200Watt Irons
SOLD276mm / No. 8
(430˚C)
SOLD989.5mm / No. 7
(370˚C)
Replacement Tipsfor 100Watt IronsSOLD449.5mm / No. 8 (430˚C)
SOLD836mm / No. 7 (370˚C)
SOLD78For 100Watt Irons
Replacement Tip Retaining Collarsfor Weller Irons
SOLD39For 200Watt Irons
16-
SolderingSoldering Irons and Equipment.
Weller 80Watt IronSOLD32An updated model withimprovements including asoft grip handle,strain relief cord and3 LED lights toIlluminate yourwork. An excellentHobby iron with a 45˚‘pointed’ tip.
Replacement Tip for 80Watt IronsSOLD666mm ‘chisel’ tip.
SolderAvailable per kgor 25kg box.Approximately20 sticks per kg.
SOLD28Grade C40% Tin, 60% Lead.
SOLD89Grade F50% Tin, 50% Lead.
SOLD47Grade K60% Tin, 40% Lead. Air Filter Mask
MASK23To prevent
inhalation ofnoxious fumesand powders.
Enfocus Software - Customer Support
Tiffany TechniqueCopper Foil and Foiling Tools.
Foil DispenserFOIL24Stop your copper foilfrom rolling away and keepyour work station tidy. This handy dispensing unit holds upto seven different widths of copper foil.
Foil Pattern ShearsFOIL26
The special blades remove enoughfrom the edge of each piece of
your pattern to allow for copperfoil between glass pieces.
Edco Copper FoilThe top quality brand.0.03mm thick.32.9 metres per roll.
Standard Copper FoilWidths Available:
FOIL23 - 4mm (3/16”)FOIL42 - 5.5mm (7/32”)FOIL28 - 6mm (1/4”)FOIL29 - 10mm (3/8”)
Discounts available on full boxes of foil.4mm, 5.5mm & 6mm - 144 rolls per box.10mm - 72 rolls per box.
Black Backed FoilFor use with Black Patina and clear glass.
One Width Available:
FOIL34 - 5.5mm (7/32”)
Silver Backed FoilFor use with clear glass and mirrors whena polished silver finished is required.
Widths Available:
FOIL63 - 5.5mm (7/32”)FOIL38 - 6mm (1/4”)FOIL93 - 10mm (3/8”)
Copper Foil SheetAdhesive backed.Can be cut into filigrees or shapesand soldered.
FOIL33 - 300 x 300mm square.
DynastyCopper Foil
A cheaper alternative.0.03mm thick.
32.9 metres per roll.
Standard Copper FoilOne Width Available:
FOIL37 - 5.5mm (7/32”)
Black Backed FoilOne Width Available:
FOIL43 - 5.5mm (7/32”)
Silver Backed FoilOne Width Available:
FOIL39 - 5.5mm (7/32”)
GlastarFoiling Machine
FOIL27Dispenses copper foil from
a roller, splits off thepaper backing,
centres foil on the glassthen partially crimps it.
Fits 4mm, 5.5mm and 6mm foil.
All Nova ToolNOVA
A useful studio tool. Can be used to crimp foil.
17-
Enfocus Software - Customer Support
Lead ViceLEAD73For stretching lead came.
Glass HammerHAM23
With 2 different heads for glass and lead work.
Nylon BrushBRUSH32
For working leaded lightcement into finished panels.
Brass BrushBRUSH22For cleaning lead came.
Black for Lead & Solder PatinaAvailable in: 50ml PAT97 & 500ml PAT96Apply to clean lead & solder. Allow to dry, then polish.
Other PatinasCopper for Solder - Especially Tiffany StyleAvailable in: 50ml PAT26 & 200g Crystals PAT24Apply to clean solder. 200g crystals to dilute with approximately 1 pint of water.
Black for BrassAvailable in: 50ml PAT99 & 500ml PAT98Apply to clean de-greased brass. Allow to dry, then polish. A second application may be necessary.
All patinas contain inorganic acids and so are all hazardous to some extent.Please read the instructions carefully and use with care.
Lead / Wire SnipsLEAD76
Gives a clean straight cut whencutting lead or brass came and wire.
Can be used to mitre.
Lead KnifeLEAD74The traditional way ofcutting lead came.
Leaded Light CementAvailable in 2kg CEM22 & 5kg CEM23Both sizes are Phoenix brand.Contains White Spirit.
Black Lead Polish75ml LEAD79
For blackening lead came.Contains White Spirit.
18-
Leaded WorkTools and Materials.
Horseshoe NailsAvailable in 250g NAIL62
or Each NAIL38 Approximately 86 nails per 250g.
All Nova ToolNOVAA useful studio tool. Can be used to open and close lead came.
H Section Flat
12 x 5mm (1/2")
Available in:2 Metres - LEAD3425kg Box - LEAD33Approx. 50 lengthsper box.
16 x 5mm (5/8")
Available in:2 Metres - LEAD3725kg Box - LEAD36Approx. 42 lengthsper box.
10 x 5mm (3/8")
Available in:2 Metres - LEAD6725kg Box - LEAD64Approx. 52 lengthsper box.
5 x 5mm (3/16")
Available in:2 Metres - LEAD2325kg Box - LEAD22Approx. 99 lengthsper box.
6 x 5mm (1/4")
Available in:2 Metres - LEAD2625kg Box - LEAD24Approx. 81 lengthsper box.
H Section Round
8 x 5mm (5/16")
Available in:2 Metres - LEAD2825kg Box - LEAD27Approx. 64 lengthsper box.
10 x 5mm (3/8")
Available in:2 Metres - LEAD3225kg Box - LEAD29Approx. 52 lengthsper box.
19-
Leaded WorkMommer Lead Came
A high quality milled lead came. Mommer are a German company experienced in lead work that havetaken over Jansen & Buscher’s came production. Available in 25kg box or single 2 metre lengths.Special profiles available on request.
8 x 5 x 5mm (9/16")
Available in:2 Metres - LEAD8325kg Box - LEAD226Approx. 50 lengthsper box.
Y SectionFor use in triple glazing.
6 x 5 x 5mm (1/2")
Available in:2 Metres - LEAD4825kg Box - LEAD47Approx. 53 lengthsper box.
10mm5mm
5mm
8mm5mm
5mm
6mm5mm
5mm
16mm
5mm
12mm
5mm5mm
10mm
5mm
5mm 6mm
5mm 5mm
8mm 10mm
5mm
5mm
8mm
8 x 5mm (5/16")H Section RoundSingle SidedAvailable in:2 Metres - LEAD66
6mm
5mm
6 x 5mm (1/4")H Section RoundSingle SidedAvailable in:2 Metres - LEAD62
3.2mm
5mm
Corner SectionFor 90° corners on boxes.
8 x 4.5mm (5/16")
Available in:2 Metres - LEAD82
10 x 5 x 5mm (5/8")
Available in:2 Metres - LEAD8425kg Box - LEAD227Approx. 50 lengthsper box.
4.5mm8mm
Brass Coated LeadCoated with polished brass on one side, for use on cabinet doors, panels or bent glass lamps.
5 x 3.2mm (3/16")U Section
Available in:2 Metres - LEAD63
Enfocus Software - Customer Support
12mm
5mm4mm
U Section Zinc
12 x 5mm (1/2")
Available in:2 Metres - ZINC38Strong and rigid; used for strengthening panels around the outside edge to prevent bending and breaking.
Steel BarAvailable in:1.8 Metres - BAR23A narrow steel bar which slots into the heart ofyour lead came, giving added strength topanels without being visible.
Brass Wire20 Gauge - WIRE44Sold Per Metre For edging lampsand givingextra strength tosoldered seams.
Copper Wire16 Gauge - WIRE63Sold Per Metre For wire tieson panels andhanging loops.
C Section Round
3.5 x 4.3mm (1/8")
Available in:2 Metres - LEAD4325kg Box - LEAD42Approx. 119 lengthsper box.
6 x 4mm (1/4")
Available in:2 Metres - LEAD4625kg Box - LEAD44Approx. 37 lengthsper box.
3.5mm
4.3mm
6mm
4mm
H Section Flat with Bead
12 x 5mm (1/2")
Available in:2 Metres - LEAD22325kg Box - LEAD93Approx. 50 lengthsper box.
16 x 5mm (5/8")
Available in:2 Metres - LEAD22425kg Box - LEAD94Approx. 42 lengthsper box.
5 x 5mm (3/16")
Available in:2 Metres - LEAD9625kg Box - LEAD39Approx. 99 lengthsper box.
6 x 5mm (1/4")
Available in:2 Metres - LEAD9725kg Box - LEAD49Approx. 81 lengthsper box.
8 x 5mm (5/16")
Available in:2 Metres - LEAD9925kg Box - LEAD77Approx. 64 lengthsper box.
10 x 5mm (3/8")
Available in:2 Metres - LEAD22225kg Box - LEAD92Approx. 52 lengthsper box.
20-
Leaded WorkMommer Lead Came
A high quality milled lead came. Mommer are a German company experienced in lead work that havetaken over Jansen & Buscher’s came production. Available in 25kg box or single 2 metre lengths.Special profiles available on request.
H Section Flat with Bead
5mm
5mm 6mm
5mm 5mm
8mm 10mm
5mm
12mm
5mm
16mm
5mm
StrengtheningAdditional items for use when making traditional leaded panels.All intended to add extra strength or reinforce your work during construction.
3mm10mm
Zinc Rebar
10 x 3mmAvailable in:1.8 Metres - ZINC24Solder to lead came or foil seams to reinforcepanels. Lightweight, does not rust,and is easy to solder .
Enfocus Software - Customer Support
21-
GrindersWe stock Glastar products from California. We have found them to be efficient & extremely reliable.A fast yet safe way to smooth and carve glass edges. Ideal for making glass pieces a ‘perfect’ fit for finecopper foil work and for finishing off untidy or difficult cuts.
All of the grinders include the following items:
• An open gridwork scratch resistant top plate which allows glass dust to pass through,keeping the surface clear. Easily removed for cleaning.
• Flexible rubber splash guard.• Motor cooled by an internal fan.
• Water cooling head system.
Glastar G81 All Star GrinderGRIND34A large studio grinder for heavy duty use.
• Powerful 3560 RPM 1/9 HP motor.
• Work surface: 280mm x 330mm.• 25mm bonded grinding head and
a 6mm grinding / drilling head.• Mini table with a water pump
for cooling the 6mm head.• Glass eye shield support (glass not included).• Built in accessory drawer.
Glastar G121 Super Star II GrinderGRIND29
Specifically suited to hobbyist or light studio use.
• 3450 RPM 1/12 HP motor.• Work surface: 232mm x 206mm.
• 19mm bonded grinding head anda 6mm grinding / drilling head.
• Roller type adjustable straight edge guide.• Built in accessory drawer.
Glastar G141 Diamond Star GrinderGRIND33Specifically suited to the hobby market,the G141 is a less expensive grinder.
• 3450 RPM 1/18 HP motor.• Work surface: 232mm x 206mm.
• 19mm plated grinding head.• Built in accessory drawer.
Enfocus Software - Customer Support
Safety GlassesGLASS23
For general purpose use.
ReplacementTop Plates
Available for:G81 Model - GRIND36G121 / G141 Models - GRIND32
UniversalMini Table for:G121 / G141 ModelsGRIND44For use when grindingwith the 6mm head.A water well keepsthe head lubricated.
Moulded Plastic EyeshieldGRIND43
For G121 and G141 Grinders.Size: 130mm x 105mm.
Glass Eye Shield SupportGRIND42For G81, G121 and G141 Grinders.Screws into existing top plate andSupports a 4mm piece of glass (notincluded) which acts as an eye shield.
GrindingHeads and Accessories.
Glastar Bonded HeadsThe diamonds are bonded to the head making it far longer lasting thanplated heads, smoother to the touch and faster to cool.Average grinding hours: 200 to 300(based on 3mm glass using a 19mm head).
25mm Bonded HeadStandard GritGRIND26For G81, G121 and G141 Grinders.
6mm Bonded Drilling &Grinding Head
GRIND27For G81, G121 and G141 Grinders.
To grind tight inside curvesand drill holes.
6mm AdaptorGRIND28This adaptor is required for use with the6mm head on older models of the G121and G141 grinders.(The motor shafts on new model grinders have been modified so there is no need for the 6mm head adaptor. The 6mm headsimply screws into the motor shaft.)
19mm Bonded HeadStandard Grit
GRIND24For G81, G121 and G141 Grinders.
22-
Carbide Grinding StoneGRIND46
A useful hand tool for grinding rough edges on glass.
Abrasive Hand PadGRIND3760 Grit.For smoothing any rough edges on your glasswork.
Enfocus Software - Customer Support
Olive Green60mm RON52680mm RON526L
Mid Blue60mm RON13280mm RON132L
Light Blue60mm RON13080mm RON130L
Mid Green60mm RON12380mm RON123L
Light Amber60mm RON11080mm RON110L
Light Green60mm RON12080mm RON120L
Clear60mm RON10080mm RON100L
Amber60mm RON11180mm RON111L
Violet60mm RON53480mm RON534L
Orange60mm RON17180mm RON171L
Turquoise60mm RON52380mm RON523L
Red60mm RON15280mm RON152L
Clear Swirled Rondel50mm RON100S
Lens 25mm RoundDesigned so the lip around
the edge fits into lead came.
Available in;Clear J100L25Amber J111L25
Cobalt Blue J132L25
Lens 33mm RoundDesigned so the lip around
the edge fits into lead came.
Available in;Clear J100L33Amber J111L33
Cobalt Blue J132L33Red J152L33
Faceted 50mm Round
Available in;Amber J111R50
Glass JewelsPressed and polished glass jewelsfor Tiffany lamps and windows.
23-
Decorative ItemsGlass RondelsHand spun Antique Rondels in 60mm & 80mm.
Available in;
Enfocus Software - Customer Support
Glass CrystalsFor decorating chandeliers, lamps or Christmas trees.
Fitted with antique wire hook.
Clear J100A40
Amber J111A40
Green J125A40
Blue J132A40
Red J152A40
JSQRRed
JSQBBlue
24-
Decorative ItemsBrilliant Cut SquaresFlashed antique glass with a brilliant cut star patternfor Victorian style doors and traditional panels.Available in; 127mm (can be cut down to 102mm).
Lead Crystal ChainSHC6Fitted with silver wires.55 Crystals per metre.16mm wide.
DropletSHC7Clear70mm long,110mm longwith wire. 15mm wide.
SpearSHC4Clear105mm long,135mm longwith wire.30mm wide.
AlmondSHC3Clear45mm long,65mm longwith wire.28mm wide.
Aztec JewelsHand cast with a natural raw gem appearance.
40mm Square, 16mm High.Available in;
Cathedral 15mm NuggetsSold as;
Individual Standard Colours NGS15250g Standard Colours NGS15KAvailable in;Amber, Light Green, Dark Green,Light Blue, Dark Blue, Pale Rose, Lilac& Dark Purple.
Individual Hot Colours NGH15250g Hot Colours NGH15KAvailable in;Red & Orange.
250g Mixed Colours NGCMIXSelection of colours above.Approximately 55 nuggets per 250g bag.
Glass NuggetsIrregular shaped nuggetsor globs of glass -for jewellery, light catchers,windows or lamps.Useful for grapes andflower centresor to add texture.
Cathedral 25mm NuggetsSold as;
Individual Standard Colours NGS25Available in; Light Green.
250g Standard Colours NGS25KAvailable in; Light Green.Approximately 26 nuggets per 250g bag.
Enfocus Software - Customer Support
BevelsStandard Shapes and Pencil Bevels.
Standard shaped high quality single bevels for traditional leaded windows and doors.Glass thickness 5mm, bevel width 12mm, outer edge thickness 2.5mm.
Drawings not to scale.
BEV43Rectangular Bevel.
76mm x 153mm.
BEV67Pencil Bevel.
25mm x 25mm.
BEV88Pencil Bevel.
25mm x 77mm.
BEV96Pencil Bevel.
25mm x 152mm.
BEV36Square Bevel.
76mm x 76mm.
BEV29Pencil Bevel.
25mm x 229mm.
BEV22Diamond Bevel.
177mm x 104mm.
25-
Enfocus Software - Customer Support
BevelsStandard Shapes and Pencil Bevels.
Standard shaped high quality single bevels for traditional leaded windows and doors.Glass thickness 5mm, bevel width 12mm, outer edge thickness 2.5mm.
Drawings not to scale.
BEV44Pencil Bevel.
51mm x 51mm.
BEV47Pencil Bevel.
51mm x 76mm.
BEV63Pencil Bevel.
51mm x 127mm.
BEV62Pencil Bevel.
51mm x 102mm.
BEV42Pencil Bevel.
51mm x 203mm.
BEV49Pencil Bevel.
51mm x 254mm.
26-
Enfocus Software - Customer Support
BevelsBevel Clusters.
Ideal as centre pieces for doors, windows or transoms.Glass thickness 5mm, bevel width 12mm, outer edge thickness 2.5mm.
Drawings not to scale.
27-
BEV46305mm Wide x 305mm High.
16 Pieces.
BEV24343mm Wide x 178mm High.
12 Pieces.
BEV73318mm Wide x 775mm High.
29 Pieces.
BEV89203mm Wide x 203mm High.
6 Pieces.
Enfocus Software - Customer Support
28-
Miscellaneous Items
Mirror HookHOOK46These self-adhesive,hard wearing metal plates are backed withXtramount® mirror adhesive tape.Simply stick to the back of your mirror.The perfect way to hang a mirrorwithout any visible signs.
100mm x 100mm.
Self Adhesive FeltA black felt that can be used to cover the bottom of lamp bases,boxes and terrariums to avoid any surface scratches.700mm Wide.
Sold Per Metre - FELT24
Glass CleanerCLEAN23An excellent
quality aerosolproduct which
leaves aclean, dust free
glass surface.660ml.
Mirror Back ProtectorA self adhesive silver foil which
prevents damage to silvering whenstuck to the back of mirror glass.
600mm Wide.
Sold Per Metre - MIR26
Enfocus Software - Customer Support
5) Silver Stain Brush13mm
BRUSH84Use solely for silver tracing.
6) Matting Brush 38mm
BRUSH28Use to apply matting colourto glass.
4) English StipplerBRUSH72Used for producing textural effects and intensifying shadows.
More commonly used for stippling on the paint to create a multitude ofsmall dots.
2) Badger BlendersPrimarily used for blending paint into an even, smooth coating. They can also be used to create striations, stipples & textures.
Available in:
Round - BRUSH6232mm - BRUSH4276mm - BRUSH23
1) Tracing BrushesUsed for drawing lines. To be able to cater for all tracing requirementsit is useful to have a range of sizes.
Available in:
Size 1 - BRUSH38Size 3 - BRUSH93Size 5 - BRUSH46
3) Scrub BrushesUsed for removing glass paint from the glass surface.
Available in:
Size 2 - BRUSH29Size 6 - BRUSH34Size 8 - BRUSH63
Gum Arabic25g - GUM82
A mixing agent to be mixed withthe powdered paint and water to your own preferred consistencybefore application to glass andany subsequent firing takes place.
Makes up to 200ml.
2
34
1
5 6
A comprehensive range of paints and brushes to fulfil all the requirements of today’s painter.
This range of traditional stained glass paints is sourced from well established companies in Staffordshire,central England. Staffordshire is the centre of the ceramics industry and is commonly known as the ‘Potteries’.It is the home of well known factories such as Royal Doulton, Wedgwood, Minton and Spode, which have helped todevelop local companies specializing in the manufacture of paints and enamel for use on china and glass.
The range offers a variety of colours, ranging from the more traditional shades to contemporary colours such as teal andpurple. They are available in tracing and shading colours, silver stains, transparent and opaque enamels.The paints are finely ground to produce smoother lines and more delicate shading and are packaged in 60cc containers eachholding 50g of powdered paint. They should be mixed with water and gum Arabic or other mixing agents beforeapplication to glass and subsequent firing.
The range of brushes has been compiled to offer the painter a brush for all painting requirements.
29-
Glass PaintingThe Rockingham Range of Glass Paints and Brushes.
These brushes are made entirely by craftsmen using the highest quality materials,which include badger hair blenders and ox hair tracers.
Enfocus Software - Customer Support
30-
Glass PaintingThe Rockingham Range of Glass Paints.
Opaque EnamelsTo be used when an opaque
effect is required. Fire at 600°C.Available in 50g.
Tracing ColoursUsed for outlining drawings.Fire at 650°C.
Available in 50g.
PT211Tracing Brown
PT288Tracing Black
PT999Patina Enamel
Softens the trace line.
Fire at 650°C.
Available in 50g.
PT417Umber Brown
PT413Terracotta
PT488Charcoal
PT482Grey / Green
PT100Arctic White
PT114Ancient Brown
Shading ColoursUsed for shading.Fire at 650°C.
Available in 50g.
PT355Blood Red
PT136Delft Blue
PT123Moss Green
PT494Rose Purple
PT367PrimroseYellow
PT365CanaryYellow
PT623Teal Green
PT335Medium Blue
PT426Lime Green
PT433Cornflower Blue
PT143Parma Violet
PT200Porcelain White
PT188Ebony Black
PT622Apple Green
PT345EmperorPurple
PT423Blue / Green
PT152Ruby
PT516Gold Yellow
Transparent EnamelsTo be used when a transparent effect is required. Fire at 550°C.Available in 50g.
PT111Amber
Silver StainAmber.
Fire at 550°C.
Available in 25g.
Enfocus Software - Customer Support
31-
KilnsKansa have been a distributor and manufacturer using Paragon Kilns since the early 90s.All the models of kilns we sell are used in the manufacturing of our own lighting products; thereforewe have excellent real experience of their use, and offer a first class maintenance and spare parts service.
These Kilns are reliable, long lasting & economical.
Paragon 13Amp Fus ion 8 - KILN23The 13 Amp Fusion 8 has been modified by Paragon to Kansa specifications to give you an ideal kiln to work with when firing vitreous enamels and paints. The tremendous benefit of this kiln compared with othermodels of a similar size is that no special wiring is required - you can just plug in and fire using any ordinary household socket.
Elements / Power• Heating elements in the lid and side walls enable even heat distribution in the chamber with no cold spots in the corners.• The heating elements are semi-enclosed into recess grooves with no pins needed to hold them in place.• Normal 13 Amp plug - 240V
Construction• Top quality insulating bricks used in the walls andbottom of the 8 sided firing chamber, all housed insidea steel case.• A strong steel base supports the kiln and enables it to be raised from the floor.
Controller• Sentry Xpress, 3 Key Digital Programmer;Stores up to 4 program settings for easy repeat firings.Has 5 preset firing speeds for different paints.
Size• Weight - 63.5kg• Exterior Size: Depth - 800mm
Width - 660mmHeight - 610mm (with lid closed)
• Interior Size: Depth - 432mmWidth - 432mmHeight - 228mm
Advantages• A cut off switch automatically disconnects the powersupply when the lid is lifted, allowing you to checkon-going work inside. The lock in lid support holdsthe lid open at a safe angle.• Maximum Temperature - 926°C / 1700°F• Two Year Warranty
Comes complete with Furniture Kit - KILN24;
• Maximum Width of Shelf - 382mm• 4 x 25mm square shelf supports included• 1lb of shelf primer also provided
KILN23
KILN2413Amp Fusion 8 Furniture Kit
Available separately
Enfocus Software - Customer Support
KILN33
32-
KilnsWe worked closely with Paragon on the development of their new Quartz Tubes, which coverthe elements in the kiln and thus protect your work from any loose residue.
The New Quartzfire Kilns are available in both 13Amp & 30Amp models.Both provide excellent value against similar competition.
Paragon 13Amp Quartz f i re - KILN33Suitable for both paint f i r ing and fusing.
Elements / Power• Quartz tube covered heating elements prevent anyresidue from spoiling work.• Normal 13 Amp plug - 240V
Construction• Steel case.• Temperature sensor sheathed with high nickel steelto ensure long life.• Heavy steel base (with rubber feet) supports the brick bottom, no extra stand is needed.• Top lifting - supported by hydraulic arms.
Controller
• Sentry Xpress, 3 Key Digital Programmer includestwo modes; single speed & eight segment ramp hold.• Stores up to 4 program settings in ramp hold.• Can skip any segment without reprogramming.
Size• Weight - 84kg• Exterior Size: Depth - 740mm
Width - 610mmHeight - 585mm (with lid closed)
• Interior Size: Depth - 445mmWidth - 445mmHeight - 406mm
Advantages• Easy to load as the top lifts out of the way and glass work can be assembled inside the kiln without anydifficulty.• Heats from the top for even heat distributionthroughout the kiln.• Maximum Temperature - 926°C / 1700°F• Two Year Warranty
Comes complete with Furniture Kit - KILN34;
• 430mm Square Shelf• 4 x 25mm square shelf supports included• 1lb of shelf primer also provided
KILN3413Amp Quartzfire Furniture Kit
Available separately
Enfocus Software - Customer Support
KILN43
33-
KilnsWe worked closely with Paragon on the development of their new Quartz Tubes, which coverthe elements in the kiln and thus protect your work from any loose residue.
Elements / Power• Top firing Quartz tube covered heating elements prevent any residue from above spoiling work. Regular elements are embedded in the side walls.• Needs a 30 Amp cooker style single phase supply - 240V / 7200 Watts.
Construction• Black painted Steel case.• Temperature sensor sheathed with high nickel steelto ensure long life.• Heavy steel base supports the brick bottom,no extra stand is needed.• Top lifting - supported by hydraulic arms.
Controller
• Sentry 2, 12 Key Digital Programmer.• State of the art ramping & holdcombinations available.
Size• Weight - 225kg• Exterior Size: Depth - 1070mm
Width - 820mmHeight - 700mm (with lid closed)
• Interior Size: Depth - 660mmWidth - 660mmHeight - 340mm
• Shelf Size: 600mm x 600mm
Advantages• Easy to load as the top lifts out of the way andglass work can be assembled inside the kiln without anydifficulty.• Heats from the top & sides to give excellent heatdistribution throughout the kiln.• Maximum Temperature - 926°C / 1700°F• Two Year Warranty
Comes complete with Furniture Kit - KILN44;
• 560mm Square Shelf• 4 x 25mm square shelf supports included• 1lb of shelf primer also provided
KILN4430Amp Quartzfire Furniture Kit
Available separately
Paragon 30Amp Quar tz f i re - KILN43Most sui table for fu sing.
Enfocus Software - Customer Support
Two Dancer FiguresAvailable in:
FIG83 - BrassFIG62 - AntiqueFIG66 - Chrome
155mm High185mm Wide
34-
Lamp BasesOur lamp bases are made from cast zinc (white metal) or brass.All bases are supplied wired and CE tested with a lampholder, harp, finial, and approximately2 metres of cable fitted with an inline switch and 3 pin fused plug.Heights shown are measured to the bottom of the harp.
Round Wooden Fan BasesSimple yet attractive. Available in a Mahogany finish.A flat fan shaped piece of glass fits into the slot in front of the bulb holder.We can supply the base as shown or drill an extra hole in the top for you to incorporate one of our cast brass fan figures.(Please specify when ordering).
Cast Brass Fan Base FiguresTwo designs, available in a variety of metalwork finishes.These figures can be used on either of the round wooden fan bases.
Example Only.BASE72 with FIG78
Black Fan BaseBASE72130mm Diameter33mm HighSlot length 80mmSlot width 6mm
Mahogany Fan BaseBASE72130mm Diameter33mm HighSlot length 80mmSlot width 6mm
Large Deco FigureSolid Cast Brass
Available in:
BASE32 - AntiqueBASE33 - Chrome
BASE34 - Polished BrassBASE53 - VerdigrisBASE54 - Old Gold
685mm High178mm Harp
(Total Height 863mm)190mm Wide
Suitable for shadediameter above
400mm.
Flapper FiguresAvailable in:
FIG78 - BrassFIG46 - AntiqueFIG93 - Chrome
175mm High160mm Wide
Enfocus Software - Customer Support
WinchesterBASE237Antique Finish170mm High155mm Harp(Total Height 325mm)110mm WideSuitable forshade diameter of160 - 220mm.
Square DecoBASE234Antique Finish180mm High155mm Harp(Total Height 335mm)96mm WideSuitable forshade diameter of170 - 220mm.
35-
Lamp BasesOur lamp bases are made from cast zinc (white metal) or brass.All bases are supplied wired and CE tested with a lampholder, harp, finial, and approximately2 metres of cable fitted with an inline switch and 3 pin fused plug.Heights shown are measured to the bottom of the harp.
Small Bases (Total height is base height plus harp).
SquareBASE93Matt Nickel Finish195mm High140mm Harp(Total Height 335mm)125mm WideSuitable forshade diameter of210 - 340mm.
HexagonalBASE236Antique Finish290mm High195mm Harp(Total Height 485mm)150mm WideSuitable for shadediameter of220 - 400mm.
Fleur De LysBASE28Antique Finish280mm High178mm Harp(Total Height 458mm)150mm WideSuitable for shadediameter of240 - 460mm.
SalisburyBASE239Solid Cast Brass275mm High140mm Harp(Total Height 415mm)160mm WideSuitable for shadediameter of210 - 340mm.
Medium Bases (Total height is base height plus harp).
Enfocus Software - Customer Support
36-
Lamp BasesOur lamp bases are made from cast zinc (white metal) or brass.All bases are supplied wired and CE tested with a lampholder, harp, finial, and approximately2 metres of cable fitted with an inline switch and 3 pin fused plug.Heights shown are measured to the bottom of the harp.
Small Bases (Total height is base height plus harp).
Medium Bases (Total height is base height plus harp).
Small TieredBASE97Chrome Finish200mm High140mm Harp(Total Height 340mm)140mm WideSuitable forshade diameter of210 - 340mm.
Small TieredBASE96Antique Finish200mm High140mm Harp(Total Height 340mm)140mm WideSuitable forshade diameter of210 - 340mm.
CanterburyBASE238Antique Finish200mm High195mm Harp(Total Height 395mm)123mm WideSuitable forshade diameter of200 - 300mm.
IsabellaBASE29Antique Finish340mm High178mm Harp(Total Height 518mm)190mm WideSuitable for shadediameter of240 - 460mm.
PalmyraBASE38Antique Finish320mm High178mm Harp(Total Height 498mm)180mm WideSuitable for shadediameter of240 - 460mm.
StarBASE42Chrome Finish430mm High(Height to finial)190mm Wide2 x BC WiredSuitable for shadediameter above400mm.
Enfocus Software - Customer Support
37-
Lamp FittingsFor a more extensive selection of parts & fittings please request our Component Parts Catalogue.
Brass Vase CapsFor soldering or bolting onto the top of lamps.Can be left polished brass or antique finished with Black for Brass Patina.
Plain Vase CapsAvailable in various sizes and metalwork finishes.All with 10mm centre hole.
88mm DiameterAvailable in:
Antique Paint - VASE88APolished Brass - VASE88BChrome - VASE88CMatt Nickel - VASE88M
113mm DiameterPolished Brass - VASE113
137mm DiameterPolished Brass - VASE137
60mm DiameterAvailable in:
Antique Paint - VASE60APolished Brass - VASE60BChrome - VASE60CMatt Nickel - VASE60M
Dome Vase Cap140mm DiameterAvailable in:
Polished Brass - VASE140
Cone Vase Cap50mm DiameterAvailable in:
Polished Brass - VASEVBChrome - VASEVC
Lampholder Cover50mm DiameterAvailable in:
Polished Brass - VASEVSBChrome - VASEVSC
2 Bulb FittingCE Tested & wired with1 Metre of Black Cable.
Available in:
Antique Paint - BULB43Polished Brass - BULB44
Chrome - BULB46
Also Available withE27 Lampholders
3 Bulb FittingCE Tested & wired with1 Metre of Black Cable.
Available in:
Antique Paint - BULB28Polished Brass - BULB29
Chrome - BULB32
Also Available withE27 Lampholders
PendantFit tings
Available in Brass or Antiquewith a 6mm or 10mm
threaded hole.Brass / 6mm - NS273Brass / 10mm - NS263
Antique / 6mm - FIN39Antique / 10mm - FIN23
Acorn Finials
Harps
To hold a shadeon a lamp base.
The harp fits onto thethreaded tube under thebulb holder, the shade sits on top of the harp
and is securedby a finial.
Height is tobottom of
finial.
Antique Finish.Available in two sizes:
140mm - HARP23178mm - HARP24
Enfocus Software - Customer Support
38-
Lamp FittingsFor a more extensive selection of parts & fittings please request our Component Parts Catalogue.
Pendant SuspensionFor hanging Tiffany shades.The pendant suspension below canbe bought as a complete product.Wired & CE Tested with500mm of chain.
The items that make up theseSuspensions can also be boughtas separate items;
Oval Link Chain22mm Links. Sold Per Metre.
Available in:
Antique - CH22Plated Brass - CH23Chrome - CH33
Cable3 Core 0.75 Cable. Per Metre.
Available in:
Black - CAB33Gold - CAB34
Hoop Rings35mm High with a10mm Threaded Hole.
Available in:
Antique Paint - HOOP23Raw Brass - HOOP22
Bulb HoldersBC without switch, 10mm entry.Available in:Antique - BULB24Brass - BULB23Chrome - BULB26
BC with switch, 10mm entry.Available in:Brass - BULB72
E27 Edison Screw.Available in:
Black - BULB64
Ceiling Plate with HookComplete with crossbar for fitting.
Available in:
Antique Paint - P1APolished Brass - P1BChrome - P1CMatt Nickel - P1M
10mm Threaded TubeAvailable in:
75mm Length - NS3421 Metre Length - NS346
SpidersSolder to the inside
of shades.For up-lighters on
a pendant suspension or an alternative to a harp
on table bases.
350mm Diameter.Fits BC lamp holder.
160mm arms can be cut down to smaller size.
Brass.
Available in:3 Arm - SPID384 Arm - SPID32
Nuts - NUT22610mm. Steel. Hexagonal.
Washers - WASH4210mm. Steel.
Available in the followingmetalwork finishes:Antique Paint - SUSP36Chrome - SUSP37Matt Nickel - SUSP38Polished Brass - SUSP42
Enfocus Software - Customer Support
39-
Lamp FittingsFor a more extensive selection of parts & fittings please request our Component Parts Catalogue.
Brass PressingsIdeal for soldering onto bent panel shades, plain shades or mirrors to add decoration or cover any untidy joints.They can be given an antique finish with Black for Brass patina, but must be thoroughly cleaned andde-greased before to achieve a good finish.
RosettePRESS2638mm Diameter.
FillerPRESS23203mm Long.
Long LeafPRESS29175mm Long.20mm Wide.
CornerPRESS2445mm Point to Corner.
Ornamental EdgePRESS27152mm Long. 32mm Wide.
Fleur De LysPRESS3243mm High.28mm Wide.
Lions HeadPRESS3355mm High.48mm Wide.18mm Projection.
Enfocus Software - Customer Support
40-
Lamp FittingsFor a more extensive selection of parts & fittings please request our Component Parts Catalogue.
U Section - 4mmSuitable for 3mm & 4mmthick glass.Sold as 2 Metres - CHAN23
4mm
4mm
Brass ChannelProvides a strong alternative to Copper Foil & enables fast production.
3mm
C Section - 3mmExcellent for bent panel lampsusing opal glass.Sold as 795mm - CHAN42
Brass U Section - 12mm20 Gauge Polished Brass.Sold as 1.2 Metres - CHAN36
12mm
12mm
Brass Angle - 12mm20 Gauge Polished Brass.Sold as 1.2 Metres - ANG23
12mm
12mm
Perforated - 3mmSimilar to the above channels but bends easieraround bent glass panels.Sold as 915mm - CHAN38
Perle Band11mm diameter decorative ball strip, used
to cover joints between panels.Sold Per Metre - BAND22
Solid Brass Band38mm wide.
Can be used as a collar on larger bent panel lampsor as a decorative border.Sold Per Metre - BAND36
Brass Banding
Lexington Brass Band50mm wide.
For Medium to Large lamps or mirrors.Sold Per Metre - BAND37
Enfocus Software - Customer Support
S A N D 4 6
Sandblaster Demonstrations
Our workshop sandblaster is available fordemonstration to potential customers. Please telephone in advance so we can
ensure the machine is ready with amember of staff to assist.
We can also sandblast customer’s own work.Please enquire for details.
41-
SandblastingWe have been “sandblasting” glass at Kansa for over 25 years, and using our hands on experience, havedeveloped a single system that allows delicate and large scale work with the same equipment!This system will allow you the same flexibility at a very reasonable cost.
Let us know what you want the system to do and we will give you advice to ensure that your purchaseis safe to use and meets all your requirements.
Pressure Pot with Air Regulator & Water Trap - SAN D 46Most sandblasters work on the ‘siphon system’ where the grit and pressurised air are fed through separate pipes to the gun. The size of the gun nozzle makes siphon systems unsuitable for line work or deep carving. The ‘pressure pot’ is a self contained unit which enables the air and grit to be mixed in the pressure vessel before being emitted in a controlled and efficient manner through smaller nozzles.
The Air Regulator allows you to control the flow of air from Compressor to Pressure Pot.Using low pressures for fine work and high pressures for deep carving.
Features• Self Sealing TopThe abrasive is poured into the top opening of thepressure pot. When the unit is pressurised, the 50mm closure seals the pot, dropping automatically when the pot is depressurised, for easy refilling.• Nozzle GunThe nozzle end has squeeze handle control whichturns off the flow of air and grit when released.An essential safety feature!• Choke ValveControls the abrasive flow. damp conditions, the valve can be closed slightly to increase the air pressure.• Set and Forget MixingThe 12mm mixing valve controls the amount ofabrasive passing through the pressure pot. If moreabrasive is required, the valve is opened slightly.Once the mixing valve is set, it doesn’t normallyneed adjusting. A clog free nylon strainer is insidethe pot.
Size• Weight - 27.5kg• Pot Size: Diameter - 255mm
Height - 890mm (fitted with wheels)
Capacity
• The pressure pot takes 35kg of abrasive which gives up to one hour of continual blasting beforerefilling is needed.
Advantages• The grit and air are mixed in the pressure pot andone feed pipe carries the pressurised grit to the nozzle -usually 2.5mm.• A small compressor of over 300 litres per minute is required. A very low pressure can obtain a fine shading or acid-etched effect pressure can be increased to deep carve 6mm glass.
Includes 1 Tungsten Carbide nozzle, 2.75m of hoseand a sandblasting hood.
Enfocus Software - Customer Support
CompressorSAND26This 3 horsepower, 13 amp compressor with a 50 litrereceiver and “soft start” motor stores the compressedair so the compressor doesn’t have to runpermanently.
• 10 bar maximum operating pressure• 13cfm air displacement• Size:Length - 1010mm, Height - 730mm, Width - 360mm
• Weight: 63kg• Wheel mounted• Complete with all fittings
Dust ExtractorSAND32Large capacity dust extractorsuitable for workshop use.
• 1Kw motor• 2 metres of hose witheasy fit cuff
• Size: Height - 770mm Diameter - 360mm
• Weight: 13.5kg• Capacity: 50 Litres• Air Flow: 53 Litres / second• Wheel Kit included
Bench Top CabinetSAND29• Top opening • Overall Size: Height - 490mm Width - 580mm Depth - 480mm • Weight: 17kg• 12V internal light
Abrasive GritSAND28
Aluminium oxide grit 80-120 grade. Sold as 25kg bag.
Pressure Pot NozzlesNOZ64
2.5mm - Tungsten Carbide.Essential for long life when working with
aluminium oxide grit.
Sandblast ResistSAND42
Excellent quality white vinyl, 610mm widewith 3mm blasting depth. Manufactured
by “Edco” our copper foil supplier. Sold per metre or 16.5 metre roll.
A range of spare parts are kept in stock.
Acc e s so r i e s
SandblastingC a b in e t sWe supply two different sandblasting cabinetsComplete with protective top viewing screensand twin integral hand gloves for operatorcontrol and safety.Both come adapted for use with our Pressure Pot,Compressor and Dust Extractor. Pressure Pot, Compressor and Dust Extractor arerequired for either cabinet in order to operate.
42-
Larger Cabinetwith Stand
SAND44• Side opening
• Cabinet work area: Height - 560mm Width - 840mm Depth - 570mm • Overall Size:
Height - 1338mm Width - 932mm Depth - 590mm • Weight: 56kg
• 12V internal light
Enfocus Software - Customer Support
E s t a b l i s h e d f o r O v e r 4 0 Y e a r s
Why not visit our large showrooms displaying our extensive range ofglass colours, fusing & stained glass materials and lighting products.
Fusing Showroom
Lighting Showroom
Enfocus Software - Customer Support
We are based in a historic former Flour Mill built in 1842, situated in a rural setting by the side of a canal.
Throughout the building there is an excellent selection of finished glass pieces to view and alsothe opportunity to see working kilns, a sandblast system and other glass work tools.
Elsecar Park
Elsecar Heritage Centre
You can find us on Wath Road, directly opposite Elsecar church, or just down
the road from the Elsecar HeritageCentre and Elsecar Park.
Just put S74 8HW in your sat nav.
The Heritage Centre also has a selection of craft and antique shops, a café and
other small local businesses.
Elsecar Church
Enfocus Software - Customer Support
FROM JUNCTION 36 ON THE M1 FOLLOW THE BROWN SIGNS TO ELSECAR HERITAGE CENTRE.
DRIVE PAST THE CENTRE AND ELSECAR CHURCH WILL BE ON YOUR LEFT HAND SIDE,
WE ARE ON THE RIGHT HAND SIDE DIRECTLY OPPOSITE THE CHURCH.
K A N S AE s t a b l i s h e d f o r 4 3 Y e a r s
Like us on
Find us on
Follow us on Twitter
The Flour Mill, Wath Road, Elsecar, Barnsley, South Yorkshire, S74 8HW
Open 9am to 5pm, Monday to Friday (except Bank Holidays) and 10am to 2pm thefirst Saturday of every month. Please note we are closed ALL Saturdays throughout August.
Telephone: 01226 747424 / Fax: 01226 743712
Email: [email protected] / Website: www.kansacraft.co.uk
Enfocus Software - Customer Support